CODE DESCRIPTION NOTE
96 THE ITALIAN SIGN OF MOTODESIGN� = Item available until it runs out of stock
APRILIA - BENELLIBMW
- CAN AM - DUCATI
APRILIASCARABEO 50-100 (09 >11)
152A Specific screen, transparent 48 x 66 cm (H x W)
153A Specific screen, transparent 56 x 66 cm (H x W)
A152A Specific fitting kit for 152A-153A
YOU CAN FIT A MONOLOCK® TOP-CASE USING THE UNIVERSAL PLATE INCLUDED.
SPORTCITY ONE 50-125 (08 > 11)
SR740 Special rack for MONOLOCK® boxes maximum load allowed 3 kg / use the plate included in the box
134A Specific screen, transparent 66 x 67 cm (H x W)
136A Specific screen, transparent 74 x 67 cm (H x W)
A151A Specific fitting kit for 134A and 136A
SR 50 DITECH (97 > 05)
SR78 Special rack for MONOLOCK® boxes use the plate included in the box
ATLANTIC 125-200-250-300 (03 > 11)
E314M Specific rear plate for MONOLOCK® case MONOLOCK® plate M5M in nylon included
D242ST Specific screen, transparent 84 x 70 cm (H x W) 19 cm higher than original
LEONARDO 125-150 (< 10/01)
D236S Specific screen, smoked 35,5 x 47,7 cm (H x W)
HABANA 125 (00 > 09)
SR74 Special rack
* IN ORDER TO FIT THE MONOLOCK® BOXES USE THE PLATE INCLUDED; TO FIT THE MONOKEY® CASES USE THE E250 PLATE (WHICH IS SOLD SEPARATELY)
SCARABEO 125-200 (07 > GIUGNO 11)
154A Specific screen, transparent 53 x 70 cm (H x W)
A154A Specific fitting kit for 154A
E318 Specific rear plate for MONOLOCK® case use the plate included in the box
SCARABEO 125-200 (DA LUGLIO 11) NEW
SR6701 Special rack for MONOLOCK® boxes maximum load allowed 3 kg / use the plate included in the box
1000A Specific screen, transparent 53 x 70 cm (H x W)
A154A Specific fitting kit for 1000A
SPORTCITY 125-200-250 (04 > 08)
E316 Specific rear plate for MONOLOCK® case use the plate included in the box
105A Specific screen, transparent 66 x 67 cm (H x W)
A129A Specific fitting kit for 105A and 128A
128A Specific screen, transparent 74 x 67 cm (H x W) 8 cm. higher than 105A
SPORTCITY CUBE 125-200-300 (08 > 11)
E319 Specific rear plate for MONOLOCK® case
134A Specific screen, transparent 66 x 67 cm (H x W)
136A Specific screen, transparent 74 x 67 cm (H x W)
A150A Specific fitting kit for 134A and 136A
Application Chart 2012.indb 96 13/03/12 10.15
Aplikační tabulky GIVI 2012
CODE DESCRIPTION NOTE
97THE ITALIAN SIGN OF MOTODESIGN
APRI
LIA
- BE
NELL
IBM
W -
CAN
AM
- DU
CATI
LEONARDO 250 (99 > 01)
D238S � Specific screen, smoked 46 x 49,5 cm (H x W)
SCARABEO 250-300 (07 > 11)
E730 Specific rear plate for MONOLOCK® case maximum load allowed 3 kg / use the plate included in the box
E317M Specific rear plate for MONOLOCK® case MONOLOCK® plate M5M in nylon included / you must puncture the housing in arranged sections / maximum load allowed 3 Kg
130A Specific screen, transparent 50 x 72 cm (H x W)
A148A Specific fitting kit for 130A
ATLANTIC 400-500 SPRINT (05 > 11)
E314M Specific rear plate for MONOLOCK® case MONOLOCK® plate M5M in nylon included
D242ST Specific screen, transparent 84 x 70 cm (H x W) 19 cm higher than original
SCARABEO 400-500 (06 > 11)
E730 Specific rear plate for MONOLOCK® case maximum load allowed 3 kg / use the plate included in the box
E317M Specific rear plate for MONOLOCK® case MONOLOCK® plate M5M in nylon included / you must puncture the housing in arranged sections / maximum load allowed 3 Kg
130A Specific screen, transparent 50 x 72 cm (H x W)
A130A � Specific fitting kit for 130A
ATLANTIC 500 (02 > 06)
D240ST Specific screen, transparent 65 x 69 cm (H x W) 9 cm higher than original
SCARABEO 500 (03 > 05)
D243ST Specific screen, transparent 66 x 50 cm (H x W) 18 cm higher than original
PEGASO 650 CUBE (97 > 00)
D237S Specific screen, smoked 43,7 x 32,5 cm ( h x l)
PEGASO 650 IE (01 > 04)
D237S Specific screen, smoked 43,7 x 32,5 cm ( h x l)
PEGASO 650 STRADA / TRAIL (05 > 11)
SR79 Special rack for MONOKEY® boxes MONOKEY® plate M5 in nylon included / maximum load allowed 6 Kg
SHIVER 750 / SHIVER GT 750 (07 > 09)
BF02 Specific metal flange for fitting the TankLock tank bags
SHIVER 750 (10 > 11) NEW
6702FZ Specific Monorack arms only match the plates M5, M5M, M6M / A handle bar for the passenger is included, you must remove the original grab rails
TE6702 Specific tubular holder for Easylock bags; it can be used also as holder for soft luggage
BF02 Specific metal flange for fitting the TankLock tank bags
DORSODURO 750 (08 > 11)
SR6700 Special rack for MONOKEY® boxes maximum load allowed 6 kg / MONOKEY® plate M5 in nylon included / you must puncture the housing in arranged sections
SR6700M Special rack for MONOLOCK® boxes MONOLOCK® plate M5M in nylon included / you must puncture the housing in arranged sections
TE6700 Specific tubular holder for Easylock bags; it can be used also as holder for soft luggage
MANA 850 / MANA 850 GT (08 > 11)
732FZ Specific Monorack arms only match the plates M5, M5M, M6M / you must remove the grab handles / is compatible with the original side case holder
Application Chart 2012.indb 97 13/03/12 10.15
2Aplikační tabulky GIVI 2012
CODE DESCRIPTION NOTE
98 THE ITALIAN SIGN OF MOTODESIGN� = Item available until it runs out of stock
APRILIA - BENELLIBMW
- CAN AM - DUCATI
BENELLITRE 899 K / TRE 1130 K (06 > 11) NEW
8700FZ Specific Monorack arms only match the plates M5, M5M, M6M
PL8700 Tubular pannier holder for MONOKEY® boxes you must move the indicators from their original position
BF02 Specific metal flange for fitting the TankLock tank bags
BMWF 650 (94 > 96)
D230S Specific screen, smoked 45,7 x 42,3 cm (H x W)
F 650 CS SCARVER (02 > 06)
SR682M Special rack for MONOLOCK® boxes MONOLOCK® plate M5M in nylon included / maximum load allowed 8 Kg
F 650 GS (00 > 03)
639F Specific Monorack arms only match the plates M2, M3, MM / compatible from august ’00 / it is not compatible with the original sidecase holder
PL188 Tubular pannier holder for MONOKEY® boxes
D234S Specific screen, smoked 41,1 x 34 cm (H x W)
F 650 GS (04 > 07)
SR685 Special rack for MONOKEY® boxes
PL188 Tubular pannier holder for MONOKEY® boxes
D331ST Specific screen, transparent 39,5 x 44 cm (H x W) 15,5 cm higher than original / not mounted with original guards
F 650 GS / F 800 GS (08 > 11)
E194 Specific rear plate for MONOKEY® case MONOKEY® plate M5 in nylon included / Is compatible with the rear plate
E194M Specific rear plate MONOLOCK® plate M5M in nylon included
SRA5103 Special rack in aluminium for Monokey® cases maximum load allowed 6 kg / It does not allow the assembly of the stop light kit or the remote control device on the case / Can not be mounted with art. PL690
PL690 Tubular pannier holder for MONOKEY® boxes mounting is only possible with the plate E194
PLR5103 Rapid release tubular side-case holder for MONOKEY® cases
333DT Specific screen, transparent 44 x 46 cm (H x W) 26 cm higher than original F650GS22 cm higher than original F800GS
D333KIT Specific fitting kit for 333DT
TN690 Specific engine guard we recommend fitting by a qualified mechanic
RP5103 Oil carter protector in Aluminium
F 650 GS DAKAR (00 > 03)
639F Specific Monorack arms it is not compatible with the original sidecase holder / only match the plates M3, MM
PL188 Tubular pannier holder for MONOKEY® boxes
ETV 1000 CAPONORD (01 > 10)
E313 � Specific rear plate for MONOKEY® case MONOKEY® plate M2 in aluminium included
PL313 Tubular pannier holder for MONOKEY® boxes
D239ST Specific screen, transparent 64 x 65,5 cm (H x W) compatible with year 2003 / without protective spoiler
Application Chart 2012.indb 98 13/03/12 10.15
3Aplikační tabulky GIVI 2012
CODE DESCRIPTION NOTE
99THE ITALIAN SIGN OF MOTODESIGN
APRI
LIA
- BE
NELL
IBM
W -
CAN
AM
- DU
CATI
F 650 ST (97 > 99)
PL185 Tubular pannier holder for MONOKEY® boxes
D232S Specific screen, smoked 43 x 41,5 cm (H x W)
G 650 GS (11) NEW
SR685 Special rack for MONOKEY® boxes
PL188 Tubular pannier holder for MONOKEY® boxes
D5101ST Specific screen, transparent 41 x 39 cm (H x W) 22 cm higher that the original
TN5101 Specific engine guard we recommend fitting by a qualified mechanic
K75 750
E180 Specific rear plate for MONOKEY® case with plate in aluminium
E181 Specific rear plate for MONOKEY® case with plate in nylon
F 800 R (09 > 11)
SRA691 Special rack in aluminium for Monokey® cases maximum load allowed 6 kg / It does not allow the assembly of the stop light kit or the remote control device on the case
PLR693 Rapid release tubular side-case holder for MONOKEY® cases
TN691 Specific engine guard we recommend fitting by a qualified mechanic
F 800 S (06 > 11)
687FZ Specific Monorack arms only match the plates M5, M5M, M6M
PLX687 Tubular pannier holder for V35 MONOKEY® SIDE cases you can mount only V35 MONOKEY® SIDE CASES
D332ST Specific screen, transparent 45 x 32 cm (H x W) 17 cm higher than original F800S
F 800 ST (06 > 11)
PLX687 Tubular pannier holder for V35 MONOKEY® SIDE cases you can mount only V35 MONOKEY® SIDE CASES
D332ST Specific screen, transparent 45 x 32 cm (H x W) 7 cm higher than original F800ST
R 850 GS (94 > 01)
PL189 Tubular pannier holder for MONOKEY® boxes
D231S Specific screen, smoked 44,2 x 43,5 cm (H x W)
R 850 R (95 > 02)
635F Specific Monorack arms is compatible with the original side case holder / only match the plates M3, MM
R 850 R (03 > 07)
SR683 Special rack for MONOKEY® boxes Complete with M5 Monokey plate / it can be mounted with the original side-case holder / maximum load allowed 6 Kg
K 100 1000 (90)
E180 Specific rear plate for MONOKEY® case with plate in aluminium
E181 Specific rear plate for MONOKEY® case with plate in nylon
K 1100 RS
E180 Specific rear plate for MONOKEY® case with plate in aluminium
E181 Specific rear plate for MONOKEY® case with plate in nylon
R 1100 GS (94 > 99)
SR694 Specific plate for MONOKEY® boxes MONOKEY® plate M5 in nylon included
PL189 Tubular pannier holder for MONOKEY® boxes
D231S Specific screen, smoked 44,2 x 43,5 cm (H x W)
Application Chart 2012.indb 99 13/03/12 10.15
4Aplikační tabulky GIVI 2012
CODE DESCRIPTION NOTE
100 THE ITALIAN SIGN OF MOTODESIGN� = Item available until it runs out of stock
APRILIA - BENELLIBMW
- CAN AM - DUCATI
R 1100 R (95 > 01)
635F Specific Monorack arms is compatible with the original side case holder / only match the plates M3, MM
R 1100 RS (94 > 98)
E183 Specific rear plate for MONOKEY® case to fit to the original rack
R 1100 RT (96 > 00)
E183 Specific rear plate for MONOKEY® case to fit to the original rack
R 1100 S (98 > 06)
681F Specific Monorack arms only match the plates M3, MM / is compatible with the original side case holder
R 1150 GS (00 > 03)
SR694 Specific plate for MONOKEY® boxes MONOKEY® plate M5 in nylon included
PL189 Tubular pannier holder for MONOKEY® boxes
D233S Specific screen, transparent 48,5 x 36,6 cm (H x W)
R 1150 R (01 > 06)
SR683 Special rack for MONOKEY® boxes Complete with M5 Monokey plate / it can be mounted with the original side-case holder / maximum load allowed 6 Kg
R 1150 RT (01)
E183 Specific rear plate for MONOKEY® case to fit to the original rack
R 1150 RT (02 > 04)
E191 Specific rear plate for MONOKEY® case to fit to the original rack / MONOKEY® plate E250 included
D241ST Specific screen, transparent 48 x 51 cm (H x W)
K 1200 GT (03 > 04)
680F Specific Monorack arms only match the plates M3, MM / is compatible with the original side case holder
K 1200 RS (00 > 04)
680F Specific Monorack arms only match the plates M3, MM / is compatible with the original side case holder
BF11 Specific metal flange for fitting the TankLock tank bags
K 1200 R (05 > 08) / K 1300 R (09 > 11)
SRA690 Special rack in aluminium for Monokey® cases it can be fit with the original side-case / maximum load allowed 6 kg / It does not allow the assembly of the stop light kit or the remote control device on the case
PLXR691 Rapid release tubular side-case holder for MONOKEY® SIDE cases you can mount only V35 MONOKEY® SIDECASES/ can be mounted without the specific plate
K 1200 S (05 > 08) / K 1300 S (09 > 11)
PLR692 Rapid release tubular side-case holder for MONOKEY® cases
D334S Specific screen, smoked 42,2 x 42,5 cm (H x W)
K 1200 GT / K 1300 GT (06 > 10) NEW
SRA693 Special rack in aluminium for Monokey® cases it can be fit with the original side-case / maximum load allowed 6 kg / It does not allow the assembly of the stop light kit or the remote control device on the case
R 1200 GS (04 > 11)
SRA692 Special rack in aluminium for Monokey® cases it can be fit with the original side-case / maximum load allowed 6 kg / It does not allow the assembly of the stop light kit or the remote control device on the case / compatible from ’07 to ’11
SR689 Special rack for MONOKEY® boxes MONOKEY® plate M5 in nylon included / in replacement of original rack / is compatible with the original side case holder
SR684 Special rack for MONOKEY® boxes to fit to the original rack / maximum load allowed 6 Kg / MONOKEY® plate M5 in nylon included
Application Chart 2012.indb 100 13/03/12 10.15
5Aplikační tabulky GIVI 2012
CODE DESCRIPTION NOTE
101THE ITALIAN SIGN OF MOTODESIGN
APRI
LIA
- BE
NELL
IBM
W -
CAN
AM
- DU
CATI
PL684 Tubular pannier holder for MONOKEY® boxes
PLR684 Rapid release tubular side-case holder for MONOKEY® cases
330DT Specific screen, transparent 51,5 x 56,5 cm (H x W) 14,5 cm higher than original / adjustable as the original
D330KIT Specific fitting kit for 330DT
AF330 Specific sliding wind-screen, transparent, complete with fitting kit. Maximum height 54 cm (12 cm of extension) width 54 cm
TN689 Specific engine guard we recommend fitting by a qualified mechanic
BF07 Specific metal flange for fitting the TankLock tank bags - only year ’08
BF06 Specific metal flange for fitting the TankLock tank bags - year ’09 - ’11
R 1200 GS ADVENTURE (06 > 11)
PL685 Tubular pannier holder for MONOKEY® boxes
SRA5102 Special rack in aluminium for Monokey® cases it can be fit with the original side-case / maximum load allowed 6 kg / It does not allow the assembly of the stop light kit or the remote control device on the case
R 1200 R (06 > 10)
688FZ Specific Monorack arms only match the plates M5, M5M, M6M / it is not compatible with the original sidecase holder / including fixing kit
PLX688 � Tubular pannier holder for V35 MONOKEY® SIDE cases you can mount only V35 MONOKEY® SIDE CASES/ / can be mounted without the Monorack using the PLX688KIT / it can’t be mounted with the original top case
PLX688KIT � Specific kit to install the PLX without the Monorack
147A Specific screen, transparent 49,5 x 46 cm (H x W)
A147A Specific fitting kit for 147A
R 1200 R (11) NEW
SR5100 Special rack for MONOKEY® boxes maximum load allowed 6 kg / MONOKEY® plate M5 in nylon included
PLXR5100 Rapid release tubular side-case holder for MONOKEY® SIDE cases you can mount only V35 MONOKEY® SIDECASES
147A Specific screen, transparent 49,5 x 46 cm (H x W)
A5100A Specific fitting kit for 147A
TN5100 Specific engine guard we recommend fitting by a qualified mechanic
BF06 Specific metal flange for fitting the TankLock tank bags
R 1200 RT (05 > 11)
E193 Specific rear plate for MONOKEY® case MONOKEY® plate E250 included
CAN AMSPYDER 990 (08 > 11)
PLX770 Tubular pannier holder for V35 MONOKEY® SIDE cases you must move from there original position / you can mount only V35 MONOKEY® SIDE CASES SIDE V35
D770ST Specific screen, transparent 52 x 46 cm (H x W) 25 cm higher than original
Application Chart 2012.indb 101 13/03/12 10.15
6Aplikační tabulky GIVI 2012
CODE DESCRIPTION NOTE
102 THE ITALIAN SIGN OF MOTODESIGN� = Item available until it runs out of stock
APRILIA - BENELLIBMW
- CAN AM - DUCATI
DUCATIMONSTER 696 / 796 / 1100 (08 > 11)
780FZ Specific Monorack arms only match the plates M5, M5M, M6M / maximum load allowed 6 kg
A780 Specific screen, smoked 34 x 40 cm (H x W) including fixing kit
T681 Tubular side holder for soft luggage
7400KIT Specific kit to install the TE7400 and the T681 without the Monorack
BF09 Specific metal flange for fitting the TankLock tank bags
MONSTER S2R / S4R / S4RS 800 - 1000 (04 > 08)
T680 Tubular side holder for soft luggage
ST 2 / ST 4 900 (97 > 01)
675F Specific Monorack arms only match the plates M3, MM / it is not compatible with the original sidecase holder
ST 3 1000 (04 > 08)
675F Specific Monorack arms only match the plates M3, MM / it is not compatible with the original sidecase holder
MULTISTRADA 620 / MULTISTRADA 1000 DS (03 > 06)
SR310 Special rack for MONOKEY® boxes MONOKEY® plate M5 in nylon included / maximum load allowed 10 Kg
MULTISTRADA 620 / MULTISTRADA 1100 (06 > 09)
SR311 Special rack for MONOKEY® boxes MONOKEY® plate M5 in nylon included / maximum load allowed 10 Kg
848 - 1098 - 1198 (07 > 11)
BF08 Specific metal flange for fitting the TankLock tank bags
STREETFIGHTER 1098 (09 > 11)
T682 � Tubular side holder for soft luggage
A781A * Specific fitting kit for 247N
* YOU CAN FIND SPOILERS PRICES ON PAGE 48
MONSTER 1100 EVO (11) NEW
780FZ Specific Monorack arms only match the plates M5, M5M, M6M / maximum load allowed 6 kg
A780 Specific screen, smoked 34 x 40 cm (H x W) including fixing kit / it is necessary to remove the small original screen
TE7400 Specific tubular holder for Easylock bags; it can be used also as holder for soft luggage can be mounted without the Monorack using the 7400KIT / you must move the indicators from their original position
7400KIT Specific kit to install the TE7400 and the T681 without the Monorack
BF09 Specific metal flange for fitting the TankLock tank bags
MULTISTRADA 1200 (10 > 11) NEW
SR312 Special rack for MONOKEY® boxes MONOKEY® plate M5 in nylon included / is compatible with the original side case holder
PLXR312 Rapid release tubular side-case holder for MONOKEY® SIDE cases you can mount only V35 MONOKEY® SIDECASES
D272ST Specific screen, transparent 60 x 47 cm (H x W) 9 cm higher than original
BF11 Specific metal flange for fitting the TankLock tank bags
Application Chart 2012.indb 102 13/03/12 10.15
7Aplikační tabulky GIVI 2012
CODE DESCRIPTION NOTE
103THE ITALIAN SIGN OF MOTODESIGN
GILE
RA -
HAR
LEY
DAVI
DSON
- H
ONDA
GILERATREND 50
M100K � Minirack kit without plate
RUNNER 50-125-180 (99 > 00)
SR125 Special rack for MONOLOCK® boxes use the plate included in the box
RUNNER 50-125-200 (04 > 05)
E681 Specific rear plate for MONOLOCK® case maximum load allowed 6Kg / use the plate included in the box
RUNNER 50-125-200 (06 > 11)
SR126 Special rack for MONOLOCK® boxes it is neccesary to puncture the housing behind the saddle / maximum load allowed 3 Kg / use the plate included in the box
NEXUS 125 - 250 - 300 - 500 (06 > 11)
E682 Specific rear plate for MONOKEY® case MONOKEY® plate M5 in nylon included / it is neccesary to puncture the housing behind the saddle / maximum load allowed 6Kg
E682M Specific rear plate for MONOLOCK® case MONOLOCK® plate M5M in nylon included / it is neccesary to puncture the housing behind the saddle / maximum load allowed 6Kg
D351ST Specific screen, transparent 65 x 50 cm (H x W) 24 cm higher than original
TB712 � Specific backrest you must puncture the housing in arranged sections / it cannot be mounted if rack and case are installed
NEXUS 500 (03 > 04)
E680 � Specific rear plate for MONOKEY® case MONOKEY® plate M5 in nylon included / it is neccesary to puncture the housing behind the saddle
E680M � Specific rear plate for MONOLOCK® case MONOLOCK® plate M5M in nylon included / it is neccesary to puncture the housing behind the saddle
D350ST Specific screen, transparent 66 x 52 cm (H x W) 12 cm higher than original
NEXUS 500 (05)
E682 Specific rear plate for MONOKEY® case MONOKEY® plate M5 in nylon included / it is neccesary to puncture the housing behind the saddle / maximum load allowed 6Kg
E682M Specific rear plate for MONOLOCK® case MONOLOCK® plate M5M in nylon included / it is neccesary to puncture the housing behind the saddle / maximum load allowed 6Kg
D350ST Specific screen, transparent 66 x 52 cm (H x W) 12 cm higher than original
TB712 � Specific backrest you must puncture the housing in arranged sections / it cannot be mounted if rack and case are installed
FUOCO 500 (07 > 11)
E710 Specific rear plate for MONOKEY® case MONOKEY® plate M2 in aluminium included
E710M Specific rear plate for MONOLOCK® case use the plate included in the box
340D Specific screen, smoked 64,5 x 54,5 cm (H x W)
D340KIT Specific fitting kit for 340D
GP 800 (08 > 11)
SR127 Special rack for MONOKEY® boxes MONOKEY® plate M5 in nylon included / with integrated passenger grabrails
SR127M Special rack for MONOLOCK® boxes MONOLOCK® plate M5M in nylon included / with integrated passenger grabrails
D352ST Specific screen, transparent 60 x 42 cm (H x W) 12 cm higher than original
TB711 � Specific backrest it cannot be mounted if rack and case are installed / you must puncture the housing in arranged sections
T750 Tubular side holder for soft luggage to be mounted only the specific side-case
Application Chart 2012.indb 103 13/03/12 10.15
8Aplikační tabulky GIVI 2012
CODE DESCRIPTION NOTE
104 THE ITALIAN SIGN OF MOTODESIGN� = Item available until it runs out of stock
GILERA - HARLEYDAVIDSON - HONDA
HARLEY DAVIDSONSPORTSTER 883-1200 (09 > 11)
TS900 Backrest without luggage carrier
T900 Tubular side holder for soft luggage, chromed
HONDABALI 50-100
A94A � Specific fitting kit for 94A only available if article 94A is already fitted
ZOOMER 50 (RUCKUS 50) (04 > 11)
SR28 Special rack for MONOLOCK® boxes use the plate included in the box
128A Specific screen, transparent 74 x 67 cm (H x W) 8 cm higher than 105A
105A Specific screen, transparent 66 x 67 cm (H x W)
A303A � Specific fitting kit for 128A and 105A
LEAD 100 (03 > 07)
259A � Specific screen, transparent 48 x 47 cm (H x W)
A259A � Specific fitting kit for 259A
LEAD 110 (08 > 11)
314A Specific screen, transparent 52 x 66,5 cm (H x W)
A314A Specific fitting kit for 314A
YOU CAN FIT A MONOLOCK® TOP-CASE USING THE UNIVERSAL PLATE INCLUDED.
VISION 110 (11) NEW
SR1106 Special rack for MONOLOCK® boxes maximum load allowed 3 kg / use the plate included in the box
308A Specific screen, transparent with serigraphy 52 x 66,5 cm (H x W)
A1106A Specific fitting kit for 308A
YOU CAN FIT A MONOLOCK® TOP-CASE USING THE UNIVERSAL PLATE INCLUDED.
@ 125-150 (00 > 03)
183A Screen, transparent 67,9 x 66,5 cm (H x W)
A183A � Specific fitting kit for 183A
@ 125-150 (04 > 08)
183A Screen, transparent 67,9 x 66,5 cm (H x W)
CBF 125 (09 > 11)
SR157 Special rack for MONOLOCK® boxes maximum load allowed 6 kg / use the plate included in the box
317DT Specific screen, transparent 44,3 x 36 cm (H x W) 14 cm higher than original
D317KIT Specific fitting kit for 317DT
TN457 Specific engine guard we recommend fitting by a qualified mechanic
CBR 125 (05 > 10)
262FZ Specific Monorack arms we recommend mounting smaller cases MONOLOCK® in conjunction with M5M or M6M plate
Application Chart 2012.indb 104 13/03/12 10.15
9Aplikační tabulky GIVI 2012
CODE DESCRIPTION NOTE
105THE ITALIAN SIGN OF MOTODESIGN
GILE
RA -
HAR
LEY
DAVI
DSON
- H
ONDA
CBR 125 R (11) NEW
SR1103 Special rack for MONOLOCK® boxes maximum load allowed 6 kg / use the plate included in the box
CG 125 TITAN (02 > 04)
25F Specific Monorack arms only match the plates M3, MM
PCX 125 (10 > 11) NEW
E231 Specific rear plate for MONOLOCK® case maximum load allowed 3 kg / use the plate included in the box / you must puncture the housing in arranged sections
D322ST Specific screen, trasparent, 59,5 x 44 cm (H x W) 18,5 cm higher than original
D322S Specific screen, smoked, 59,5 x 44 cm (H x W) 18,5 cm higher than original
323DT Specific screen, transparent 82 x 58 cm (H x W) 41 cm higher than original
D323KIT Specific fitting kit for 323DT
SC231 Dry-Cool seat cover specific for Honda PCX 125 (11)
INNOVA 125 (07 > 11)
SR151 Special rack for MONOLOCK® boxes maximum load allowed 3 Kg / use the plate included in the box
DYLAN 125-150 (02 > 07)
SR22 Special rack in replacement of original rack
128A Specific screen, transparent 74 x 67 cm (H x W) 8 cm higher than 105A
102A Specific screen, transparent 66 x 68 cm (H x W)
A185A Specific fitting kit for 128A and 102A
* IN ORDER TO FIT THE MONOLOCK® BOXES USE THE PLATE INCLUDED; TO FIT THE MONOKEY® CASES USE THE E250 PLATE (WHICH IS SOLD SEPARATELY)
PANTHEON 125-150 (98 > 02)
SR140 Special rack
D199S * � Specific screen, smoked 49,9 x 72,5 cm (H x W)
D199ST * Specific screen, transparent 49,9 x 72,5 cm (H x W)
D202ST * Specific screen, transparent 60 x 74,4 cm (H x W) 10 cm higher and larger than D199ST and D199S
D199KIT Kit for spoilers D199S, D199ST and 202ST
* THE ITEM IS SOLD IN PACKS OF TWO PIECES EACH
PANTHEON 125-150 (03 > 08)
E216 � Specific rear plate
D219ST * Specific screen, trasparent 63 x 72,5 cm (H x W)
* THE ITEM IS SOLD IN PACKS OF TWO PIECES EACH
SH 125-150 (01 > 04)
186A Specific screen, transparent 58 x 68 cm (H x W)
A186A Specific fitting kit for 186A
TB21 � Specific backrest
YOU CAN FIT A MONOLOCK® TOP-CASE USING THE UNIVERSAL PLATE INCLUDED.
SH 125I-150I (05 > 08)
E219 Specific rear plate for MONOLOCK® case use the plate included in the box
311A Specific screen, transparent 63 x 70 cm (H x W)
313A Specific screen, transparent 55 x 66 cm (H x W)
A311A Specific fitting kit for 311A and 313A
Application Chart 2012.indb 105 13/03/12 10.15
10Aplikační tabulky GIVI 2012
CODE DESCRIPTION NOTE
106 THE ITALIAN SIGN OF MOTODESIGN� = Item available until it runs out of stock
GILERA - HARLEYDAVIDSON - HONDA
SH 125I-150I (11) NEW
E227 Specific rear plate for MONOLOCK® case maximum load allowed 3 kg / use the plate included in the box
P205 � Single tubular side-case holder Compatible with the following Soft Bags: T467 - T457 - T450 / You have to mount it on the right side of the scooter
311A Specific screen, transparent 63 x 70 cm (H x W)
313A Specific screen, transparent 55 x 66 cm (H x W)
A315A Specific fitting kit for 311A and 313A
SC227 Dry-Cool seat cover specific for Honda SH 125i / 150i (09 > 11)
S-WING 125-150 (07 > 11)
E224 Specific rear plate for MONOLOCK® case use the plate included in the box
D312ST Specific screen, transparent 89 x 54 cm (H x W)
XL 125V VARADERO (01 > 06)
E213 Specific rear plate for MONOKEY® case
E217 Specific rear plate for MONOLOCK® case maximum load allowed 5 Kg / use the plate included in the box
PL173 Tubular pannier holder for MONOKEY® boxes
D215S Specific screen, smoked 49,9 x 33,2 cm (H x W)
XL 125V VARADERO (07 > 11)
E213 Specific rear plate for MONOKEY® case
E217 Specific rear plate for MONOLOCK® case maximum load allowed 5 Kg / use the plate included in the box
PL202 Tubular pannier holder for MONOKEY® boxes
D311S Specific screen, smoked 46 x 33 cm (H x W) 19 cm higher than original
CBF 250 (04 > 06)
261FZ Specific Monorack arms maximum load allowed 6 Kg / we recommend mounting smaller cases MONOLOCK® in conjunction with M5M or M6M plate
CBF 250 (07 > 08)
264FZ � Specific Monorack arms maximum load allowed 6 Kg / we recommend mounting smaller cases MONOLOCK® in conjunction with M5M or M6M plate
CBR 250 R (11) NEW
SR1103 Special rack for MONOLOCK® boxes maximum load allowed 6 kg / use the plate included in the box
CN 250 (89 > 00)
SR13 � Special rack for MONOKEY® boxes MONOKEY® plate M2 in aluminium included
D182S Specific screen, smoked 60,2 x 66,5 cm (H x W)
FORESIGHT 250 (97 > 08)
SR140 Special rack
D199S * � Specific screen, smoked 49,9 x 72,5 cm (H x W)
D199ST * Specific screen, transparent 49,9 x 72,5 cm (H x W)
D202ST * Specific screen, transparent 60 x 74,4 cm (H x W) 10 cm higher and larger than D199ST and D199S
D199KIT Kit for spoilers D199S, D199ST and 202ST
* THE ITEM IS SOLD IN PACKS OF TWO PIECES EACH
FORZA 250 (05 > 07)
E220 Specific rear plate for MONOKEY® case MONOKEY® plate M5 in nylon included / in order to fix you must remove the original backrest
E220M Specific rear plate for MONOLOCK® case MONOLOCK® plate M5M in nylon included/ in order to fix you must remove the original backrest
D306ST Specific screen, transparent 73 x 61,5 cm (H x W) 34 cm higher than original
Application Chart 2012.indb 106 13/03/12 10.15
11Aplikační tabulky GIVI 2012
CODE DESCRIPTION NOTE
107THE ITALIAN SIGN OF MOTODESIGN
GILE
RA -
HAR
LEY
DAVI
DSON
- H
ONDA
FORZA 250 X / EX (08 >11)
E226 Specific rear plate for MONOKEY® case MONOKEY® plate M5 in nylon included / it is neccesary to puncture the housing behind the saddle / maximum load allowed 6 Kg
E226M Specific rear plate for MONOLOCK® case MONOLOCK® plate M5M in nylon included / it is neccesary to puncture the housing behind the saddle / Maximum load allowed 6Kg
315DT Specific screen, transparent 84 x 57,4 cm (H x W) 34 cm higher than original
D315KIT Specific fitting kit for 315DT
SH 300I (07 > 10)
E223 Specific rear plate for MONOLOCK® case maximum load allowed 3 Kg / use the plate included in the box
307A Specific screen, transparent with serigraphy 59 x 72,5 cm (H x W)
308A Specific screen, transparent with serigraphy 52 x 66,5 cm (H x W)
A307A Specific fitting kit for 307A and 308A
AF308 Specific sliding wind-screen, transparent, complete with fitting kit. Maximum height 48 cm (12 cm of extension) width 67 cm
SH 300I (11) NEW
E223 Specific rear plate for MONOLOCK® case maximum load allowed 3 Kg / use the plate included in the box
307A Specific screen, transparent with serigraphy 59 x 72,5 cm (H x W)
308A Specific screen, transparent with serigraphy 52 x 66,5 cm (H x W)
A1100A Specific fitting kit for 307A and 308A
AF1100 Specific sliding wind-screen, transparent, complete with fitting kit. Maximum height 48 cm (12 cm of extension) width 67 cm
SC1100 Dry-Cool seat cover specific for Honda SH300 (11)
SILVER WING 400 (06 > 09)
SR19 Special rack for MONOKEY® boxes MONOKEY® plate M5 in nylon included / you must puncture the original case holder
SR19M Special rack for MONOLOCK® boxes MONOLOCK® plate M5M in nylon included / you must puncture the original case holder
214DT Specific screen, transparent 63 x 60 cm (H x W) 10 cm higher than original
D214KIT Specific fitting kit for 214DT
AF214 Specific sliding wind-screen, transparent, complete with fitting kit. Maximum height 57 cm (12 cm of extension) width 59cm
TB19 Specific backrest it can be mounted with the SR19 / SR19M
SW-T 400 - 600 (09 > 11)
SR19 Special rack for MONOKEY® boxes MONOKEY® plate M5 in nylon included / you must puncture the original case holder
SR19M Special rack for MONOLOCK® boxes MONOLOCK® plate M5M in nylon included / you must puncture the original case holder
D318ST Specific screen, transparent, 89 x 67 cm (H x W) 18 cm higher than the original
D318B Specific sports screen 52 x 49 cm (H x W)
AF318 Specific sliding wind-screen, transparent, complete with fitting kit. Maximum height 78 cm (12 cm of extension) width 66 cm
TB19 Specific backrest it can be mounted with the SR19 / SR19M
T222 Tubular side holder for soft luggage
CB 500 (94)
241F � Specific Monorack arms only match the plates M3, MM
CB 500 (97 > 05) / CB 500S (00 > 05)
250F Specific Monorack arms only match the plates M3, MM
CBF 500 (04 > 11)
260FZ Specific Monorack arms only match the plates M5, M5M, M6M / it is not compatible with the original sidecase holder
PL174 Tubular pannier holder for MONOKEY® boxes
PLX174 Tubular pannier holder for V35 MONOKEY® SIDE cases you can mount only V35 MONOKEY® SIDE CASES / can be mounted without the Monorack using the PLX174KIT
PLXR174 Rapid release tubular side-case holder for MONOKEY® SIDE cases you can mount only V35 MONOKEY® SIDECASES/ can be mounted without the Monorack
Application Chart 2012.indb 107 13/03/12 10.15
12Aplikační tabulky GIVI 2012
CODE DESCRIPTION NOTE
108 THE ITALIAN SIGN OF MOTODESIGN� = Item available until it runs out of stock
GILERA - HARLEYDAVIDSON - HONDA
PLX174KIT Specific kit to install the PLX without the Monorack
T218 Tubular side holder for soft luggage compatible from ’05 to ’06
TN450 � Specific engine guard we recommend fitting by a qualified mechanic
CB 600 F HORNET / S (98 > 02)
162FZ Specific Monorack arms only match the plates M5, M5M, M6M
T214 Tubular side holder for soft luggage
CB 600 F HORNET (03 > 06)
258FZ Specific Monorack arms only match the plates M5, M5M, M6M
PL172 � Tubular pannier holder for MONOKEY® boxes is mounted in conjuction with Monorack
A305 Specific screen, smoked 31,2 x 40,8 cm (H x W) including fixing kit / it can be installed without taking off the original light fairing / compatible from ’05 to ’06
A756A900 � Specific screen with fitting kit, matt silver - standard 36 x 45 cm (H x W) compatible from ’03 to ’04
T214 Tubular side holder for soft luggage
CB 600 F HORNET / HORNET ABS (07 > 10)
263FZ Specific Monorack arms only match the plates M5, M5M, M6M / you need to remove the handle bar of the scooter to install it
PLX176 Tubular pannier holder for V35 MONOKEY® SIDE cases you can mount only V35 MONOKEY® SIDE CASES / is mounted in conjuction with Monorack
A309 Specific screen, smoked 33,5 x 40,5 cm (H x W) including fixing kit / only for CB 600 F Hornet
A310 Specific screen, smoked 33,5 x 40,5 cm (H x W) including fixing kit / only for Hornet ABS
T219 Tubular side holder for soft luggage
TN453 Specific engine guard we recommend fitting by a qualified mechanic
TE1107 Specific tubular holder for Easylock bags; it can be used also as holder for soft luggage
BF03 Specific metal flange for fitting the TankLock tank bags
CBF 600S/ CBF 600N (04 > 11)
260FZ Specific Monorack arms only match the plates M5, M5M, M6M / it is not compatible with the original sidecase holder
PL174 Tubular pannier holder for MONOKEY® boxes
PLX174 Tubular pannier holder for V35 MONOKEY® SIDE cases you can mount only V35 MONOKEY® SIDE CASES / can be mounted without the Monorack using the PLX174KIT
PLXR174 Rapid release tubular side-case holder for MONOKEY® SIDE cases you can mount only V35 MONOKEY® SIDECASES/ can be mounted without the Monorack
PLX174KIT Specific kit to install the PLX without the Monorack
D303ST Specific screen, transparent 54 x 39,5 cm (H x W) 12,5 cm higher than original / only for faired models
T218 Tubular side holder for soft luggage
TN369 � Specific engine guard we recommend fitting by a qualified mechanic / compatible with all years ’07
TN456 Specific engine guard we recommend fitting by a qualified mechanic / compatible from ’08
BF03 Specific metal flange for fitting the TankLock tank bags
CBR 600 F (97 > 98)
249F Specific Monorack arms only match the plates M3, MM
CBR 600 F (99 > 09)
252F Specific Monorack arms it cannot be mounted with T208 / only match the plates M3, MM
D213S � Specific screen, smoked 45,5 x 37 cm (H x W) compatible with model ’01
CBR 600 F (11) NEW
1102FZ Specific Monorack arms only match the plates M5, M5M, M6M
1102KIT Specific kit to install the TE1102 and PLX1102 without the Monorack
PLX1102 Tubular pannier holder for V35 MONOKEY® SIDE cases you can mount only V35 MONOKEY® SIDE CASES / can be mounted without the Monorack using the 1102KIT
1105D Specific screen, smoked 39,5 x 36 cm (H x W) 5,5 cm higher than the original
Application Chart 2012.indb 108 13/03/12 10.15
13Aplikační tabulky GIVI 2012
CODE DESCRIPTION NOTE
109THE ITALIAN SIGN OF MOTODESIGN
GILE
RA -
HAR
LEY
DAVI
DSON
- H
ONDA
D1105KIT Specific fitting kit for 1105D
TE1102 Specific tubular holder for Easylock bags; it can be used also as holder for soft luggage can be mounted without the Monorack using the 1102KIT
BF03 Specific metal flange for fitting the TankLock tank bags
CBR 600 FS (01 > 02)
D213S � Specific screen, smoked 45,5 x 37 cm (H x W)
CBR 600 RR (05 > 06)
BF03 Specific metal flange for fitting the TankLock tank bags
CBR 600 RR (07 > 09)
BF03 Specific metal flange for fitting the TankLock tank bags
HORNET 600 (11) NEW
1102FZ Specific Monorack arms only match the plates M5, M5M, M6M
PLX1102 Tubular pannier holder for V35 MONOKEY® SIDE cases you can mount only V35 MONOKEY® SIDE CASES / can be mounted without the Monorack using the 1102KIT
A1102 Specific screen, smoked 28,5 x 36 cm (H x W) including fixing kit
TE1102 Specific tubular holder for Easylock bags; it can be used also as holder for soft luggage can be mounted without the Monorack using the 1102KIT
1102KIT Specific kit to install the TE1102 and PLX1102 without the Monorack
TN453 Specific engine guard we recommend fitting by a qualified mechanic
BF03 Specific metal flange for fitting the TankLock tank bags
SILVER WING 600 / ABS (01 > 09)
SR19 Special rack for MONOKEY® boxes MONOKEY® plate M5 in nylon included / you must puncture the original case holder
SR19M Special rack for MONOLOCK® boxes MONOLOCK® plate M5M in nylon included / you must puncture the original case holder
214DT Specific screen, transparent 63 x 60 cm (H x W) 10 cm higher than original
D214KIT Specific fitting kit for 214DT
AF214 Specific sliding wind-screen, transparent, complete with fitting kit. Maximum height 57 cm (12 cm of extension) width 59cm
TB19 Specific backrest it can be mounted with the SR19 / SR19M
VT 600 C SHADOW (89 > 01)
TS800 � Backrest with detachable small luggage carrier
XL 600 RM/LM
E200 Specific rear plate for MONOKEY® case
XL 600 V TRANSALP (88)
E200 Specific rear plate for MONOKEY® case
XL 600 V TRANSALP (89 > 93)
E200 Specific rear plate for MONOKEY® case
D180S Specific screen, smoked 43,7 x 43,9 cm (H x W)
TN363 Specific engine guard we recommend fitting by a qualified mechanic
XL 600 V TRANSALP (94 > 96)
E200 Specific rear plate for MONOKEY® case
PL131 Tubular pannier holder for MONOKEY® boxes
D205S Specific screen, smoked 54,2 x 38,9 cm (H x W) 10 cm higher than D191S
D191S Specific screen, smoked 44,1 x 38,4 cm (H x W)
TN363 Specific engine guard we recommend fitting by a qualified mechanic
Application Chart 2012.indb 109 13/03/12 10.15
14Aplikační tabulky GIVI 2012
CODE DESCRIPTION NOTE
110 THE ITALIAN SIGN OF MOTODESIGN� = Item available until it runs out of stock
GILERA - HARLEYDAVIDSON - HONDA
XL 600 V TRANSALP (97 > 99)
PL131 Tubular pannier holder for MONOKEY® boxes
D205S Specific screen, smoked 54,2 x 38,9 cm (H x W) 10 cm higher than D191S
D191S Specific screen, smoked 44,1 x 38,4 cm (H x W)
TN363 Specific engine guard we recommend fitting by a qualified mechanic
NT 650 V DEAUVILLE (98 > 05)
SR15 Special rack for MONOKEY® boxes MONOKEY® plate M2 in aluminium included
SR15M Special rack for MONOLOCK® boxes MONOLOCK® plate MM in aluminium included
D201S Specific screen, smoked 45 x 40,3 cm (H x W)
DOMINATOR 650 (< 92)
E200 Specific rear plate for MONOKEY® case
DOMINATOR 650 (92 > 94)
E200 Specific rear plate for MONOKEY® case
185D � Specific screen, smoked 30,4 x 31,7 cm (H x W) only with spoiler
D185KIT Specific fitting kit for 185D
DOMINATOR 650 (95)
185D � Specific screen, smoked 30,4 x 31,7 cm (H x W) only with spoiler
D185KIT Specific fitting kit for 185D
DOMINATOR 650 (96 > 02)
D185KIT Specific fitting kit for 194D
XL 650V TRANSALP (00 > 07)
E213 Specific rear plate for MONOKEY® case
PL167 Tubular pannier holder for MONOKEY® boxes You must move from there original position
D209S Specific screen, smoked 56 x 36 cm (H x W)
T213 Tubular side holder for soft luggage it can be mounted with the specific plate
TN366 Specific engine guard we recommend fitting by a qualified mechanic / mount with central tripod mounted
DN-01 700 (08 > 11)
265FZ Specific Monorack arms only match the plates M5, M5M, M6M / maximum load allowed 6 Kg
PLX204 Tubular pannier holder for V35 MONOKEY® SIDE cases you can mount only V35 MONOKEY® SIDE CASES / is mounted in conjuction with Monorack
D316S Specific screen, smoked 66 x 45 cm (H x W)
INTEGRA 700 (12) NEW
1108FZ Specific Monorack arms only match the plates M5, M5M, M6M / it is not compatible with the sidecase holder
1109FZ Specific Monorack arms only match the plates M5, M5M, M6M
PLX1109 Tubular pannier holder for V35 MONOKEY® SIDE cases you can mount only V35 MONOKEY® SIDE CASES / can be mounted without the Monorack using the 1109KIT
PL1109 Tubular pannier holder for MONOKEY® boxes can be mounted without the Monorack using the 1109KIT
TE1109 Specific tubular holder for Easylock bags; it can be used also as holder for soft luggage can be mounted without the Monorack using the 1109KIT
1109KIT Specific kit to install the PLX1109 / PL1109 / TE1109 without the Monorack
NC700X (12) NEW
1111FZ Specific Monorack arms only match the plates M5, M5M, M6M
TE1111 Specific tubular holder for Easylock bags; it can be used also as holder for soft luggage can be mounted without the Monorack using the 1111KIT
1111KIT Specific kit to install the TE1111 without the Monorack
Application Chart 2012.indb 110 13/03/12 10.15
GILERA - HARLEYDAVIDSON - HONDA
15Aplikační tabulky GIVI 2012
CODE DESCRIPTION NOTE
111THE ITALIAN SIGN OF MOTODESIGN
GILE
RA -
HAR
LEY
DAVI
DSON
- H
ONDA
NT 700 DEAUVILLE (06 > 11)
E221 Specific rear plate for MONOKEY® case MONOKEY® plate M5 in nylon included/ for fixing the original lid must be drilled
E221M Specific rear plate for MONOLOCK® case MONOLOCK® plate M5M in nylon included/ for fixing the original lid must be drilled
D307ST Specific screen, transparent 49 x 46,5 cm (H x W) 9 cm higher than the original
BF03 Specific metal flange for fitting the TankLock tank bags
XL 700V TRANSALP (08 > 11)
E225 Specific rear plate for MONOKEY® case MONOKEY® plate M5 in nylon included
E225M Specific rear plate for MONOLOCK® case MONOLOCK® plate M5M in nylon included
PL203 Tubular pannier holder for MONOKEY® boxes it can be mounted with the specific plate
D313S Specific screen, smoked 44,5 x 37 cm (H x W) 15,5 cm higher than original
T221 Tubular side holder for soft luggage it can be mounted also without the specific plate
TN455 Specific engine guard we recommend fitting by a qualified mechanic
BF03 Specific metal flange for fitting the TankLock tank bags
AFRICA TWIN 750 (90 > 92)
E200 Specific rear plate for MONOKEY® case
D181S Specific screen, smoked 48,7 x 33,1 cm (H x W) only with spoiler
AFRICA TWIN 750 (93 > 95)
E210 Specific rear plate for MONOKEY® case
D188S Specific screen, smoked 48,6 x 33 cm (H x W)
TN362 Specific engine guard we recommend fitting by a qualified mechanic / only for ’95
AFRICA TWIN 750 (96 > 02)
E210 Specific rear plate for MONOKEY® case
PL148 Tubular pannier holder for MONOKEY® boxes
D195S Specific screen, smoked 44 x 35 cm (H x W)
TN362 Specific engine guard we recommend fitting by a qualified mechanic
BLACK WIDOW 750 (00 > 02)
A23 Universal screen, 38,8 x 41 cm (H x W) low, transparent version
A35N Universal screen, 54,9 x 46,8 cm (H x W) high and shaded bottom version
AS100A2 Specific fitting kit for A23 and A35N
A41N Universal screen, 53,7 x 51,6 cm (H x W) high and shaded bottom version
A42 Universal screen, 40,3 x 45,7 cm (H x W) low, transparent version
AS300A2 Specific fitting kit for A41N and A42
CB 750 SEVEN FIFTY (92 > 00)
232F Specific Monorack arms only match the plates M3, MM
VFR 750 F (90 > 93)
229F Specific Monorack arms only match the plates M3, MM
VFR 750 F (94 > 97)
242F Specific Monorack arms only match the plates M3, MM
VT 750S (10 > 11)
A35 Specific screen, transparent 54,9 x 46,8 cm (H x W)
Application Chart 2012.indb 111 13/03/12 10.15
GILE
RA -
HAR
LEY
DAVI
DSON
- H
ONDA
16Aplikační tabulky GIVI 2012
CODE DESCRIPTION NOTE
112 THE ITALIAN SIGN OF MOTODESIGN� = Item available until it runs out of stock
GILERA - HARLEYDAVIDSON - HONDA
A23 Specific screen, transparent 38,8 x 41 cm (H x W)
AS122A2 Specific fitting kit for A35 and A23
T223 Tubular side holder for soft luggage, chromed
TS808 Backrest with detachable small luggage carrier, chromed
VT SHADOW 750 (04 > 11)
A23 Universal screen, transparent 38,8 x 41 cm (H x W) low, transparent version
A41N Universal screen, 53,7 x 51,6 cm (H x W) high and shaded bottom version
AS121A2 Specific fitting kit for A23 and A41N
T216 Tubular side holder for soft luggage
TS806 Backrest with detachable small luggage carrier
VT SHADOW SPIRIT 750 (07 > 10)
A23 Universal screen, 38,8 x 41 cm (H x W) low, transparent version
A35N Universal screen, 54,9 x 46,8 cm (H x W) high and shaded bottom version
AS100A2 Specific fitting kit for A23 and A35N
A41N Universal screen, 53,7 x 51,6 cm (H x W) high and shaded bottom version
A42 Universal screen, 40,3 x 45,7 cm (H x W) low, transparent version
AS300A2 Specific fitting kit for A41N and A42
T220 Tubular side holder for soft luggage mounting is only possible with TS807
TS807 Backrest with detachable small luggage carrier
CROSSRUNNER 800 (11) NEW
1104FZ Specific Monorack arms only match the plates M5, M5M, M6M
PLXR1104 Rapid release tubular side-case holder for MONOKEY® SIDE cases you must move the indicators from their original position / you can mount only V35 MONOKEY® SIDE V35
PLX1104 Tubular pannier holder for V35 MONOKEY® SIDE cases you can mount only V35 MONOKEY® SIDE CASES / can be mounted without the Monorack using the 1104KIT / you must move the indicators from their original
1104KIT Specific kit to install the PLX1104 without the Monorack
1104DT Specific screen, transparent 43,5 x 48 cm (H x W) 12 cm higher than original
D1104KIT Specific fitting kit for 1104DT
VFR 800 (98 > 01)
257FZ Specific Monorack arms only match the plates M5, M5M, M6M / you must remove the grabrails, they are reproduced by the rack itself
PL257 Tubular pannier holder for MONOKEY® boxes is mounted in conjuction with Monorack
D200S Specific screen, smoked 46 x 42 cm (H x W)
VFR 800 VTEC (02 > 11)
166FZ Specific Monorack arms only match the plates M5, M5M, M6M / it is not compatible with the original sidecase holder / reinforced version
PL166 Tubular pannier holder for MONOKEY® boxes
PLX166 Tubular pannier holder for V35 MONOKEY® SIDE cases you can mount only V35 MONOKEY® SIDE CASES
PLXR166 Rapid release tubular side-case holder for MONOKEY® SIDE cases you can mount only V35 MONOKEY® SIDECASES
D217S Specific screen, smoked 52 x 43 cm (H x W)
BF03 Specific metal flange for fitting the TankLock tank bags
CB 900 HORNET (02 > 07)
256FZ Specific Monorack arms only match the plates M5, M5M, M6M
PL256 � Tubular pannier holder for MONOKEY® boxes is mounted in conjuction with Monorack
A257A * � Specific fitting kit for 240A, 240BL and 240N902
* YOU CAN FIND SPOILERS PRICES ON PAGE 48
Application Chart 2012.indb 112 13/03/12 10.15
17Aplikační tabulky GIVI 2012
CODE DESCRIPTION NOTE
113THE ITALIAN SIGN OF MOTODESIGN
GILE
RA -
HAR
LEY
DAVI
DSON
- H
ONDA
CB 1000 R (08 > 11)
266FZ Specific Monorack arms only match the plates M5, M5M, M6M
A312A * Specific fitting kit for 247A and 247N compatible from ’08 to ’10
A1101A * Specific fitting kit for 247A and 247N compatible from ’11
TE1101 Specific tubular holder for Easylock bags; it can be used also as holder for soft luggage can be mounted without the Monorack using the 1101KIT
1101KIT Specific kit to install the TE1101 without the Monorack
BF03 Specific metal flange for fitting the TankLock tank bags
* YOU CAN FIND SPOILERS PRICES ON PAGE 48
CBF 1000 / ABS (06 > 09)
260FZ Specific Monorack arms only match the plates M5, M5M, M6M / it is not compatible with the original sidecase holder
PL174 Tubular pannier holder for MONOKEY® boxes
PLX174 Tubular pannier holder for V35 MONOKEY® SIDE cases you can mount only V35 MONOKEY® SIDE CASES / can be mounted without the Monorack using the PLX174KIT
PLXR174 Rapid release tubular side-case holder for MONOKEY® SIDE cases you can mount only V35 MONOKEY® SIDECASES/ can be mounted without the Monorack
PLX174KIT Specific kit to install the PLX without the Monorack
D303ST Specific screen, transparent 54 x 39,5 cm (H x W) 12,5 cm higher than original
T218 Tubular side holder for soft luggage
TN452 Specific engine guard we recommend fitting by a qualified mechanic
BF03 Specific metal flange for fitting the TankLock tank bags
CBF 1000 / CBF 1000 ST (10 > 11)
SR777 Special rack for MONOKEY® boxes MONOKEY® plate M5 in nylon included / you must remove the grabrails, they are reproduced by the rack itself / is compatible with the original side case holder
SR777M Special rack for MONOLOCK® boxes MONOLOCK® plate M5M in nylon included / you must remove the grabrails, they are reproduced by the rack itself / is compatible with the original side case holder
PLXR208 Rapid release tubular side-case holder for MONOKEY® SIDE cases you can mount only V35 MONOKEY® SIDECASES / mounting is only possible with SR777 / SR777M or 777KIT
PL208 Tubular pannier holder for MONOKEY® boxes
777KIT Specific kit to install the PLXR without the plate
D320ST Specific screen, transparent 49 x 42,5 cm (H x W) 15 cm higher than original / adjustable as the original
TN460 Specific engine guard we recommend fitting by a qualified mechanic
BF03 Specific metal flange for fitting the TankLock tank bags
CBR 1000 F (89 > 92)
227F Specific Monorack arms only match the plates M3, MM
Y155 � Specific wingrack fitting kit only with chassis N141
CBR 1000 F (93 > 00)
227F Specific Monorack arms only match the plates M3, MM
Y155 � Specific wingrack fitting kit only with chassis N141
CBR 1000 RR (06 > 07)
D308SP � Protective deflector above applies to the original spoiler for increased protection
CBR 1000 RR (08 > 09)
BF03 Specific metal flange for fitting the TankLock tank bags
VTR 1000 F (97 > 04)
251F Specific Monorack arms only match the plates M3, MM
XL 1000V VARADERO (99 > 02)
E212 Specific rear plate for MONOKEY® case
Application Chart 2012.indb 113 13/03/12 10.16
18Aplikační tabulky GIVI 2012
CODE DESCRIPTION NOTE
114 THE ITALIAN SIGN OF MOTODESIGN� = Item available until it runs out of stock
GILERA - HARLEYDAVIDSON - HONDA
PL164 Tubular pannier holder for MONOKEY® boxes
D203S Specific screen, smoked 62,4 x 55 cm (H x W)
D203ST Specific screen, transparent 62,4 x 55 cm (H x W)
TN365 Specific engine guard we recommend fitting by a qualified mechanic
XL 1000V VARADERO / ABS (03 > 06)
E212 Specific rear plate for MONOKEY® case
PL170 Tubular pannier holder for MONOKEY® boxes to be mounted using original bolts
D300S Specific screen, smoked 60 x 48 cm (H x W) 9 cm higher than original
D300ST Specific screen, transparent 60 x 48 cm (H x W) 9 cm higher than original
TN367 Specific engine guard we recommend fitting by a qualified mechanic
XL 1000V VARADERO / ABS (07 > 11)
E222 Specific rear plate for MONOKEY® case
PL177 Tubular pannier holder for MONOKEY® boxes it can be mounted with the specific plate
PLX177 Tubular pannier holder for V35 MONOKEY® SIDE cases you can mount only V35 MONOKEY® SIDE CASES
D300S Specific screen, smoked 60 x 48 cm (H x W) 9 cm higher than original
D300ST Specific screen, transparent 60 x 48 cm (H x W) 9 cm higher than original
TN454 Specific engine guard we recommend fitting by a qualified mechanic / compatible with all years ’10
CBR 1100 XX (97 > 09)
248F Specific Monorack arms only match the plates M3, MM
Y158 Specific wingrack fitting kit only with chassis N140
DH196 Specific screen, smoked 42,6 x 62 cm (H x W)
ST 1100 PAN EUROPEAN
E190 Specific rear plate
D184S Specific screen, smoked 46,5 x 40,5 cm (H x W)
CROSSTOURER 1200 (12) NEW
SR1110 Special rack for MONOKEY® boxes MONOKEY® plate M5 in nylon included
SRA1110 Special rack in aluminium for Monokey® cases maximum load allowed 6 kg / It does not allow the assembly of the stop light kit or the remote control device on the case / to be mounted on the original case carrier
VFR 1200 F (10 > 11)
267FZ Specific Monorack arms only match the plates M5, M5M, M6M / A larger grab rail for the passenger is included, you must remove the original grab rails / is compatible with the original side case holder
PLX209 Tubular pannier holder for V35 MONOKEY® SIDE cases you can mount only V35 MONOKEY® SIDE CASES / can be mounted without the Monorack using the 267KIT
267KIT Specific kit to install the PLX without the Monorack
D321S Specific screen, smoked 40 x 40 cm (H x W) 14 cm higher than original
BF03 Specific metal flange for fitting the TankLock tank bags
CB 1300 / CB 1300 S (03 > 09)
259FZ Specific Monorack arms only match the plates M5, M5M, M6M
TN451 Specific engine guard we recommend fitting by a qualified mechanic
CB 1300 S (10 > 11)
268FZ Specific Monorack arms only match the plates M5, M5M, M6M
D324S Specific screen, smoked 56 x 36 cm (H x W) 20,5 cm higher than original
TN451 Specific engine guard we recommend fitting by a qualified mechanic
TE224 Specific tubular holder for Easylock bags; it can be used also as holder for soft luggage
Application Chart 2012.indb 114 13/03/12 10.16
19Aplikační tabulky GIVI 2012
CODE DESCRIPTION NOTE
115THE ITALIAN SIGN OF MOTODESIGN
KAWA
SAKI
- K
EEWA
YKT
M -
KIMC
O -
LML
PAN EUROPEAN ST 1300 (02 > 11)
E215 Specific rear plate for MONOKEY® case to fit to the original rack
GOLD WING 1800 (01 > 10)
D319ST Specific screen, transparent, 82 x 72 cm (H x W) 20 cm higher than the original / Without the frontal loophole for the original grill
KAWASAKIER 5 500 (98 > 00)
432F Specific Monorack arms only match the plates M3, MM
ER 5 500 (01 > 07)
440F Specific Monorack arms only match the plates M3, MM
GPZ 500 S (94 > 03)
425F Specific Monorack arms only match the plates M3, MM
ER 6N / ER 6F 650 (05 > 08)
445FZ Specific Monorack arms maximum load allowed 6 kg / only match the plate M5M or M6M
PLX445 Tubular pannier holder for V35 MONOKEY® SIDE cases you can mount only V35 MONOKEY® SIDE CASES/ is mounted in conjuction with Monorack / you must move the indicators from their original position
D404S * Specific screen, smoked 59,5 x 35,5 cm (H x W) 8,5 cm higher than the original / for faired version
A445A Specific fitting kit for 245N, 246G730 and 246N902 it requires the fitting of 245N painted black internally as not to reflect the light / not for faired version
T262 Tubular side holder for soft luggage
BF04 Specific metal flange for fitting the TankLock tank bags
* YOU CAN FIND SPOILERS PRICES ON PAGE 48
ER-6N / ER-6F 650 (09 > 11)
449FZ Specific Monorack arms you need to remove the handle bar of the scooter to install it
PLX449 Tubular pannier holder for V35 MONOKEY® SIDE cases you can mount only V35 MONOKEY® SIDE CASES / original grabrails should be removed / can be mounted without the Monorack using the PLX449KIT
PLX449KIT Specific kit to install the PLX without the Monorack
A448A * Specific fitting kit for 247N only for 6N models
D409S Specific screen, smoked 44 x 35 cm (H x W) 6 cm higher than original / only for ER-6F
TE266 Specific tubular holder for Easylock bags; it can be used also as holder for soft luggage
BF04 Specific metal flange for fitting the TankLock tank bags
* YOU CAN FIND SPOILERS PRICES ON PAGE 48
ER-6N / ER-6F 650 (12) NEW
4104FZ Specific Monorack arms only match the plates M5, M5M, M6M
PLX4104 Tubular pannier holder for V35 MONOKEY® SIDE cases you can mount only V35 MONOKEY® SIDE CASES
A4104 Specific screen, smoked 32 x 30 cm (H x W) including fixing kit / only for ER-6N
D4104S Specific screen, smoked 50 x 40 cm (H x W) 10 cm higher than original / only for ER-6F
TE4104 Specific tubular holder for Easylock bags; it can be used also as holder for soft luggage
BF04 Specific metal flange for fitting the TankLock tank bags
ZZR 600 (93 > 01)
423F Specific Monorack arms only match the plates M3, MM
D166S � Specific screen, smoked 42,9 x 37 cm (H x W)
Application Chart 2012.indb 115 13/03/12 10.16
20Aplikační tabulky GIVI 2012
CODE DESCRIPTION NOTE
116 THE ITALIAN SIGN OF MOTODESIGN� = Item available until it runs out of stock
KAWASAKI - KEEWAYKTM - KIMCO - LML
KLR 650 ENDURO (07 > 11)
E581 Specific rear plate for MONOKEY® case MONOKEY® plate E250 included
E581M Specific rear plate for MONOLOCK® case
PL448 Tubular pannier holder for MONOKEY® boxes
408D Specific screen, smoked 540 x 350 mm (H x W) 23 cm higher than original
D408KIT Specific fitting kit for 408D
TN421 Specific engine guard we recommend fitting by a qualified mechanic
VERSYS 650 (06 > 09)
447FZ Specific Monorack arms only match the plates M5, M5M, M6M / including fixing kit
PL447 Tubular pannier holder for MONOKEY® boxes can be mounted without the Monorack using the PLX447KIT
PLX447 Tubular pannier holder for V35 MONOKEY® SIDE cases you can mount only V35 MONOKEY® SIDE CASES / can be mounted without the Monorack using the PLX447KIT
PLX447KIT Specific kit to install the PLX without the Monorack
D405ST Specific screen, transparent 46 x 44,5 cm (H x W)
VERSYS 650 (10 > 11)
451FZ Specific Monorack arms only match the plates M5, M5M, M6M
PLR450 Rapid release tubular side-case holder for MONOKEY® cases can be mounted without the Monorack using the 450KIT / you must move the indicators from their original position
PLXR450 Rapid release tubular side-case holder for MONOKEY® SIDE cases you can mount only V35 MONOKEY® SIDECASES / can be mounted without the Monorack using the 450KIT / you must move the indicators from their original position
450KIT Specific kit to install the PLR and the PLXR without the Monorack
D410ST Specific screen, transparent 48 x 37 cm (H x W) 21 cm higher than original
TN422 Specific engine guard we recommend fitting by a qualified mechanic
TE4103 Specific tubular holder for Easylock bags; it can be used also as holder for soft luggage
BF04 Specific metal flange for fitting the TankLock tank bags
ZR 7 / ZR 7 S 750 (99 > 04)
436F Specific Monorack arms only match the plates M3, MM
Z 750 (04 > 06)
443FZ Specific Monorack arms only match the plates M5, M5M, M6M / maximum load allowed 6 kg
402D Specific screen, smoked 41 x 38,5 cm (H x W)
D402KIT � Specific fitting kit for 402D
T263 � Tubular side holder for soft luggage
Z 750 S (05 > 07)
444FZ Specific Monorack arms only match the plates M5, M5M, M6M / maximum load allowed 6 kg
Z 750 (07 > 11)
448FZ Specific Monorack arms only match the plates M5, M5M, M6M / maximum load allowed 6 Kg / you must move from there original position
A446 Specific screen, smoked 34 x 34 cm (H x W) including fixing kit
TE265 Specific tubular holder for Easylock bags; it can be used also as holder for soft luggage can be mounted without the Monorack using the T265KIT / you must move the indicators from their original position
T265KIT Specific fitting kit for tubular holder
BF04 Specific metal flange for fitting the TankLock tank bags
VN 800 CLASSIC (96 > 02)
A36 Specific screen, transparent 40,7 x 41 cm (H x W) low and transparent version / only available if article AS126A2 is already fitted
A37N Specific screen, transparent 54 x 47,2 cm (H x W) high and shaded bottom version / only available if article AS126A2 is already fitted
TS835 � Backrest without luggage carrier compatible from ’00 to ’02
Application Chart 2012.indb 116 13/03/12 10.16
21Aplikační tabulky GIVI 2012
CODE DESCRIPTION NOTE
117THE ITALIAN SIGN OF MOTODESIGN
KAWA
SAKI
- K
EEWA
YKT
M -
KIMC
O -
LML
W 800 (11) NEW
SR4101 Special rack
PL4101 Tubular pannier holder for MONOKEY® boxes
A4101 Specific screen, smoked 37 x 33,5 cm (H x W) including fixing kit
TN4101 Specific engine guard we recommend fitting by a qualified mechanic
TN4101CR Specific engine guard, chromed we recommend fitting by a qualified mechanic
* IN ORDER TO FIT THE MONOLOCK® BOXES USE THE PLATE INCLUDED; TO FIT THE MONOKEY® CASES USE THE E250 PLATE (WHICH IS SOLD SEPARATELY)
VN 900 CUSTOM / CLASSIC (06 > 11) NEW
PL4102 Tubular pannier holder for MONOKEY® boxes
A36 Specific screen, transparent 40,7 x 41 cm (H x W) low and transparent version / only for Classic version
A37N Specific screen, transparent 54 x 47,2 cm (H x W) high and shaded bottom version / only for Classic version
AS128A2 Specific fitting kit for A36 and A37N only for Classic version
A23 Universal screen, transparent 38,8 x 41 cm (H x W) low, transparent version / only for Custom version
A35N Universal screen, transparent 54,9 x 46,8 cm (H x W) high and shaded bottom version / only for Custom version
AS100A2 Specific fitting kit for A23 and A35N only for Custom version
A42 Universal screen, transparent 40,3 x 45,7 cm (H x W) low, transparent version / only for Custom version
A41N Universal screen, transparent 53,7 x 51,6 cm (H x W) high and shaded bottom version / only for Custom version
AS300A2 Specific fitting kit for A41N and A42 only for Custom version
TS836 Backrest with detachable small luggage carrier
T264 Tubular side holder for soft luggage
GTR 1000
E128 � Specific rear plate for MONOKEY® case
D74S � Specific screen, smoked 48,2 x 53,5 cm (H x W) only with spoiler
KLV 1000 (04 > 10)
E528 Specific rear plate for MONOKEY® case MONOKEY® plate E250 included
E528M Specific rear plate for MONOLOCK® case use the plate included in the box
PL528 Tubular pannier holder for MONOKEY® boxes
PLX528 Tubular pannier holder for V35 MONOKEY® SIDE cases you can mount only V35 MONOKEY® SIDE CASES
D260ST Specific screen, transparent 57 x 48 cm (H x W) compatible with models ’04 / 18 cm higher than original / only with spoiler
AF260 Specific sliding wind-screen, transparent, complete with fitting kit. Maximum height 65 cm (12 cm of extension) width 44 cm
TN528 Specific engine guard we recommend fitting by a qualified mechanic
VERSYS 1000 (12) NEW
SR4105 Special rack for MONOKEY® boxes MONOKEY® plate E250 in nylon included
SR4105M Special rack for MONOLOCK® boxes use the plate included in the box
SRA4105 Special rack in aluminium for Monokey® cases maximum load allowed 6 kg / It does not allow the assembly of the stop light kit or the remote control device on the case / to be mounted on the original case carrier
PLR4105 Rapid release tubular side-case holder for MONOKEY® cases you must move the indicators from their original position
PLXR4105 Rapid release tubular side-case holder for MONOKEY® SIDE cases you can mount only V35 MONOKEY® SIDECASES
D4105ST Specific screen, transparent 49 x 48 cm (H x W) 16 cm higher that the original
AF4105 Specific sliding wind-screen, transparent, complete with fitting kit. Maximum height 52 cm (12 cm of extension), width 48 cm
TN4105 Specific engine guard we recommend fitting by a qualified mechanic
BF04 Specific metal flange for fitting the TankLock tank bags
Z 1000 (03 > 06)
442FZ � Specific Monorack arms only match the plates M5, M5M, M6M / maximum load allowed 6 kg
D401S Specific screen, smoked 41 x 26,5 cm (H x W)
Application Chart 2012.indb 117 13/03/12 10.16
KAWA
SAKI
- K
EEWA
YKT
M -
KIMC
O -
LML
22Aplikační tabulky GIVI 2012
CODE DESCRIPTION NOTE
118 THE ITALIAN SIGN OF MOTODESIGN� = Item available until it runs out of stock
KAWASAKI - KEEWAYKTM - KIMCO - LML
Z 1000 (07 > 09)
448FZ Specific Monorack arms only match the plates M5, M5M, M6M / maximum load allowed 6 Kg / you must move from there original position
A447 Specific screen, smoked cm 34 x 34 cm (H x W) including the kit to specific attachments
Z 1000 (10 > 11)
450FZ Specific Monorack arms only match the plates M5, M5M, M6M / maximum load allowed 6 Kg
T267 Tubular side holder for soft luggage can be mounted without the Monorack using the T267KIT
T267KIT Specific fitting kit for tubular holder
A449 Specific screen, smoked 42 x 36 cm (H x W) including fixing kit
BF04 Specific metal flange for fitting the TankLock tank bags
Z 1000 SX (11) NEW
4100FZ Specific Monorack arms only match the plates M5, M5M, M6M / it is not compatible with the original sidecase holder
PLXR4100 Rapid release tubular side-case holder for MONOKEY® SIDE cases you can mount only V35 MONOKEY® SIDECASES / can be mounted without the Monorack using the 4100KIT
4100KIT Specific kit to install the PLXR4100 without the Monorack
4100D Specific screen, smoked 56 x 37 cm (H x W) 14 cm higher than original
D4100KIT Specific fitting kit for 4100D
TE4100 Specific tubular holder for Easylock bags; it can be used also as holder for soft luggage
BF04 Specific metal flange for fitting the TankLock tank bags
ZRX 1100 / ZRX 1100 S (97 > 01)
433F Specific Monorack arms maximum load allowed 6 Kg / only match the plates M3, MM
D174S Specific screen, smoked 36,2 x 32,1 cm (H x W) for faired version
ZZR 1100 (93 > 01)
422F Specific Monorack arms only match the plates M3, MM
ZZR 1200 (02 > 05)
441FZ Specific Monorack arms only match the plates M5, M5M, M6M / you must remove the grabrails, they are reproduced by the rack itself
PL441 Tubular pannier holder for MONOKEY® boxes is mounted in conjuction with Monorack
ZRX 1200 (02)
433F Specific Monorack arms maximum load allowed 6 Kg / only match the plates M3, MM
ZRX 1200 R (02)
433F Specific Monorack arms maximum load allowed 6 Kg / only match the plates M3, MM
D174S Specific screen, smoked 36,2 x 32,1 cm (H x W) for faired version
ZRX 1200 S (01 > 02)
433F Specific Monorack arms maximum load allowed 6 Kg / only match the plates M3, MM
GTR 1400 (07 > 11)
SR410 Special rack for MONOKEY® boxes MONOKEY® plate M2 in aluminium included
D407ST Specific screen, transparent 58 x 53 cm (H x W) 8,5 cm higher than original (07 > 09) / 2,5 cm higher than original (10)
ZZR 1400 / ZX 14 (06 > 11)
PLX446 Tubular pannier holder for V35 MONOKEY® SIDE cases you can mount only V35 MONOKEY® SIDE CASES
D406S � Specific screen, smoked 43,5 x 37 cm (H x W)
Application Chart 2012.indb 118 13/03/12 10.16
KAWASAKI - KEEWAYKTM - KIMCO - LML
23Aplikační tabulky GIVI 2012
CODE DESCRIPTION NOTE
119THE ITALIAN SIGN OF MOTODESIGN
KAWA
SAKI
- K
EEWA
YKT
M -
KIMC
O -
LML
KEEWAYGOCCIA 50 (09 > 11)
E851 � Specific rear plate for MONOLOCK® case maximum load allowed 3 kg / use the plate included in the box
107A Specific screen, transparent 50,8 x 66 cm (H x W)
A851A � Specific fitting kit for 107A
RY6 50 (10 > 11)
SR852 Special rack for MONOLOCK® boxes maximum load allowed 3 kg / use the plate included in the box
288A Specific screen, transparent 56 x 71,5 cm (H x W)
A853A Specific fitting kit, black for 288A
RY8 50 EVO SPORT (10 > 11)
SR852 Special rack for MONOLOCK® boxes maximum load allowed 3 kg / use the plate included in the box
288A Specific screen, transparent 56 x 71,5 cm (H x W)
A288A Specific fitting kit, black for 288A
OUTLOOK 125-150 (09) NEW
120A Specific screen, transparent 66 x 67 cm (H x W)
121A Specific screen, transparent 74 x 67 cm (H x W) 8 cm higher than 120A
A850A Specific fitting kit for 120A and 121A
KTMDUKE 125 (11) NEW
SR7701 Special rack for MONOLOCK® boxes use the plate included in the box
A7701A * Specific fitting kit for 247A and 247N
BF12 Specific metal flange for fitting the TankLock tank bags
* YOU CAN FIND SPOILERS PRICES ON PAGE 48
ADVENTURE 950 / 990 (03 > 11)
E650M Specific rear plate for MONOLOCK® case use the plate included in the box
SR7700 Special rack for MONOKEY® boxes maximum load allowed 6 kg / MONOKEY® plate M5 in nylon included
PL650 Tubular pannier holder for MONOKEY® boxes
990 SMT (09 > 11)
SRA750 Special rack in aluminium for Monokey® cases maximum load allowed 6 kg / It does not allow the assembly of the stop light kit or the remote control device on the case
PLR750 Rapid release tubular side-case holder for MONOKEY® cases
D750S Specific screen, smoked 49 x 41 cm (H x W) 17 cm higher than original
Application Chart 2012.indb 119 13/03/12 10.16
24Aplikační tabulky GIVI 2012
CODE DESCRIPTION NOTE
120 THE ITALIAN SIGN OF MOTODESIGN� = Item available until it runs out of stock
KAWASAKI - KEEWAYKTM - KIMCO - LML
KYMCOAGILITY 50-125-150 R16 (08 > 11)
E137 Specific rear plate for MONOLOCK® case use the plate included in the box
440A Specific screen, transparent 66 x 64 cm (H x W)
441A Specific screen, transparent 72 x 66 cm (H x W) 6 cm higher than 440A
A440A Specific fitting kit for 440A and 441A
DINK 50-125-200I (06 > 11)
SR90 Special rack for MONOLOCK® boxes use the plate included in the box
292DT Specific screen, transparent 67 x 58 cm (H x W) 37 cm higher the original
D292KIT Specific fitting kit for 292DT
LIKE 50-125-200I (09 > 12)
E138 � Specific rear plate for MONOLOCK® case maximum load allowed 3 kg / use the plate included in the box
6102A Specific screen, transparent 52 x 66,6 cm (H x W)
A6102A Specific fitting kit for 6102A
442A � Specific screen, transparent. 52 x 66.6 cm (H x W)
A442A � Specific fitting kit for 442A
PEOPLE S 50-125-200 (05 > 11)
137A Specific screen, transparent 64 x 71 cm (H x W)
A137A Specific fitting kit for 137A
YOU CAN FIT A MONOLOCK® TOP-CASE USING THE UNIVERSAL PLATE INCLUDED.
B&W 125-150 (00 > 06)
102A Specific screen, transparent 66 x 68 cm (H x W) only available if article A135A is already fitted
128A Specific screen, transparent 74 x 67 cm (H x W) only available if article A135A is already fitted
DOWNTOWN 125I-300I (09 > 11)
SR92 Special rack for MONOKEY® boxes MONOKEY® plate M5 in nylon included / maximum load allowed 6 kg
SR92M Special rack for MONOLOCK® boxes maximum load allowed 6 kg / use the plate included in the box
TB82 Specific backrest it cannot be mounted if rack and case are installed
D294ST Specific screen, transparent 81.5 x 64 cm (H x W) 15,5 cm higher than original
DINK CLASSIC 125-150 (97 > 06)
SR80 � Special rack for MONOLOCK® boxes it requires fitment of cases up to 42 ltr
132A * Specific screen, transparent 72,5 x 55,1 cm (H x W)
A132A Specific fitting kit for 132A
* THE ITEM IS SOLD IN PACKS OF TWO PIECES EACH
GRAND DINK 125-150-250 (00 > 07)
SR87 � Special rack for MONOKEY® boxes MONOKEY® plate M5 in nylon included
SR87M Special rack for MONOLOCK® boxes use the plate included in the box
290DT Specific screen, transparent 60,6 x 70 cm (H x W)
D290KIT � Specific fitting kit for 290DT
G-DINK 125-300 (12) NEW
SR6101 Special rack for MONOLOCK® boxes maximum load allowed 3 kg / use the plate included in the box
Application Chart 2012.indb 120 13/03/12 10.16
25Aplikační tabulky GIVI 2012
CODE DESCRIPTION NOTE
121THE ITALIAN SIGN OF MOTODESIGN
MBK
- MO
TO G
UZZI
MOTO
MORI
NI -
PEU
GEOT
PEOPLE GTI 125-300 (10 > 11)
E139 Specific rear plate for MONOLOCK® case maximum load allowed 3 kg / use the plate included in the box
443A Specific screeen, transparent 53 x 72 cm (H x W)
A443A Specific fitting kit for 443A
PEOPLE 250 (04 > 05)
A45 � Specific screen, transparent 60, 5 x 69,5 cm (H x W)
XCITING 250-300-500 (05 > 09)
SR89 Special rack for MONOKEY® boxes MONOKEY® plate M5 in nylon included
SR89M Special rack for MONOLOCK® boxes use the plate included in the box
D293ST Specific screen, transparent 87 x 64 cm (H x W)
TB80 Specific backrest it cannot be mounted if rack and case are installed
XCITING R 300I-500I (09 > 11)
SR91 Special rack for MONOKEY® boxes MONOKEY® plate M5 in nylon included / maximum load allowed 6 kg
SR91M Special rack for MONOLOCK® boxes maximum load allowed 6 kg / use the plate included in the box
TB81 Specific backrest it cannot be mounted if rack and case are installed
D295ST Specific screen, transparent 85.5 x 66 cm (H x W) 25 cm higher than original
AF295 Specific sliding wind-screen, transparent, complete with fitting kit. Maximum height 80 cm (12 cm of extension) width 61 cm
MYROAD 700 (11) NEW
SR6100 Special rack for MONOKEY® boxes MONOKEY® plate M5 in nylon included
SR6100M Special rack for MONOLOCK® boxes MONOLOCK® plate M5M in nylon included
LMLSTAR 125-150 (09 > 11)
642F � Specific Monorack arms only match the plates M3, MM
SR642 Special rack for MONOLOCK® boxes maximum load allowed 6 kg / use the plate included in the box
642A Specific screen, transparent 54 x 62 cm (H x W)
A642A Specific fitting kit for 642A
MBKOVETTO 50-100 (97 > 02)
SR86 Special rack for MONOLOCK® boxes use the plate included in the box
OVETTO 50 (08 > 11)
SR366 Special rack for MONOLOCK® boxes use the plate included in the box
105A Specific screen, transparent 66 x 67 cm (H x W)
128A Specific screen, transparent 74 x 67 cm (H x W) 8 cm higher than 105A
A285A Specific fitting kit for 105A and 128A
Application Chart 2012.indb 121 13/03/12 10.16
26Aplikační tabulky GIVI 2012
CODE DESCRIPTION NOTE
122 THE ITALIAN SIGN OF MOTODESIGN� = Item available until it runs out of stock
MBK - MOTO GUZZIMOTOMORINI - PEUGEOT
CITYLINER 125 (07 > 11)
SR361 Special rack for MONOLOCK® boxes maximum load allowed 6 Kg / use the plate included in the box
D439ST Specific screen, transparent with serigraphy 71 x 77 cm (H x W) 22 cm higher than original
FLAME X 125 (07 > 11)
SR354 Special rack for MONOLOCK® boxes use the plate included in the box
102A Specific screen, transparent 66 x 68 cm (H x W)
128A Specific screen, transparent 74 x 67 cm (H x W) 8 cm higher than 105A
A283A Specific fitting kit for 102A and 128A
SKYCRUISER 125 (05 > 09)
SR355 Special rack for MONOKEY® boxes you must puncture the housing in arranged sections / MONOKEY® plate M5 in nylon inlcuded
SR355M Special rack for MONOLOCK® boxes you must puncture the housing in arranged sections / use the plate included in the box
D438ST Specific screen, transparent 63,5 x 69,5 cm (H x W) 25,5 cm higeher than original
TB49 Specific backrest it cannot be mounted if rack and case are installed
SKICRUISER 125 (10 > 11)
SR370 Special rack for MONOKEY® boxes maximum load allowed 6 kg / MONOKEY® plate M5 in nylon included / it is neccesary to puncture the housing behind the saddle
SR370M Special rack for MONOLOCK® boxes maximum load allowed 6 kg / it is neccesary to puncture the housing behind the saddle / use the plate included in the box
TB55 Specific backrest it cannot be mounted if rack and case are installed
446DT Specific screen, transparent 73,5 x 63 cm (H x W) 30 cm higher than original
D446KIT Specific fitting kit for 446DT
AF446 Specific sliding wind-screen, transparent, complete with fitting kit. Maximum height 70 cm (12 cm of extension), width 62 cm
D446B Specific sports screen 37 x 43 cm (H x W)
SKYLINER 125-150 (99 > 00)
SR43 � Special rack
* IN ORDER TO FIT THE MONOLOCK® BOXES USE THE PLATE INCLUDED; TO FIT THE MONOKEY® CASES USE THE E250 PLATE (WHICH IS SOLD SEPARATELY)
SKYLINER 125-150 CAT. (01 > 11)
SR46 Special rack for MONOKEY® boxes MONOKEY® plate M5 in nylon included
SR46M Special rack for MONOLOCK® boxes use the plate included in the box
130DT Specific screen, transparent 69,2 x 68,2 cm (H x W)
D130KIT Specific fitting kit for 130DT
WAAP 125 (10 > 11)
SR373 Special rack for MONOLOCK® boxes maximum load allowed 3 kg / use the plate included in the box
288A Specific screen, transparent 56 x 71,5 cm (H x W)
A289A Specific fitting kit, black for 289A
SKYLINER 250 (00 > 07)
SR44 � Special rack for MONOKEY® boxes MONOKEY® plate M3 in nylon included
SR44M � Special rack for MONOLOCK® boxes MONOLOCK® plate MM in aluminium included
D124ST * Specific screen, transparent 80 x 70,7 cm (H x W) with air intake
D127ST * Specific screen, transparent 80 x 70,7 cm (H x W) without moulding steel / without a hole for the air
* THE ITEM IS SOLD IN PACKS OF THREE PIECES EACH
KILIBRÈ 300 (03 > 07)
D432ST Specific screen, transparent 72 x 75 cm (H x W) 22 cm higher than original
TB50 � Specific backrest it cannot be mounted if rack and case are installed
Application Chart 2012.indb 122 13/03/12 10.16
27Aplikační tabulky GIVI 2012
CODE DESCRIPTION NOTE
123THE ITALIAN SIGN OF MOTODESIGN
MBK
- MO
TO G
UZZI
MOTO
MORI
NI -
PEU
GEOT
MOTO GUZZIBREVA 750 (03 > 11)
703F Specific Monorack arms is compatible with the original side case holder / only match the plates M3, MM
BREVA 850-1100-1200 (05 > 11)
SR210 Special rack for MONOKEY® boxes is compatible with the original side case holder / MONOKEY® plate M5 in nylon included
SR210M Special rack for MONOLOCK® boxes is compatible with the original side case holder / MONOLOCK® plate M5M in nylon included
NORGE 850-1200 (06 > 11)
SR210 Special rack for MONOKEY® boxes is compatible with the original side case holder / MONOKEY® plate M5 in nylon included
SR210M Special rack for MONOLOCK® boxes is compatible with the original side case holder / MONOLOCK® plate M5M in nylon included
STELVIO 1200 (08 > 11)
E708 Specific rear plate for MONOKEY® case MONOKEY® plate M5 in nylon included
E708M Specific rear plate for MONOLOCK® case MONOLOCK® plate M5M in nylon included
PL708 � Tubular pannier holder for MONOKEY® boxes
D610ST Specific screen, transparent 61 x 46 cm (H x W) 13 cm higher than original / 13 cm più alto dell’originale / compatible from ’08 to ’10
MOTO MORINIGRANPASSO 1200 (08 > 11)
SR780 � Special rack for MONOKEY® boxes MONOKEY® plate M5 in nylon included
SR780M � Special rack for MONOLOCK® boxes MONOLOCK® plate M5M in nylon included
PEUGEOTTWEET 50-125-150 (10 > 11)
107A Specific screen, transparent 50,8 x 66 cm (H x W)
A299A Specific fitting kit for 107A
LXR 125-200 (09 > 11)
105A Specific screen, transparent 66 x 67 cm (H x W)
128A Specific screen, transparent 74 x 67 cm (H x W) 8 cm higher than 105A
A291A � Specific fitting kit for 105A and 128A
A298A Specific fitting kit for 105A and 128A
GEOPOLIS 125-250-400 (07 > 11)
SR63 Special rack for MONOLOCK® boxes maximum load allowed 6 Kg / use the plate included in the box / only for 250 cc. version.
SR64 � Special rack for MONOLOCK® boxes maximum load allowed 6 kg / use the plate included in the box / only for 400 cc. version.
SV 250 (02)
SR140 Special rack
D199S * � Specific screen, smoked 49,9 x 72,5 cm (H x W)
D199ST * Specific screen, transparent 49,9 x 72,5 cm (H x W)
Application Chart 2012.indb 123 13/03/12 10.16
28Aplikační tabulky GIVI 2012
CODE DESCRIPTION NOTE
124 THE ITALIAN SIGN OF MOTODESIGN� = Item available until it runs out of stock
PIAGGIO - SUZUKISYM - TRIUMPH
PIAGGIOFLY 50-100-125-150 (04 > 11)
SR104 Special rack for MONOLOCK® boxes maximum load allowed 6 Kg / use the plate included in the box
107A Specific screen, transparent 50,8 x 66 cm (H x W)
A110A Specific fitting kit for 107A
GRILLO 50
M150K � Minirack kit without plate
LIBERTY 50-125-150-200 (02 > 08)
SR103 � Specific plate for MONOLOCK® boxes only for 125-150-200 cc version / use the plate included in the box
E342 Specific rear plate for MONOLOCK® case maximum load allowed 3 Kg / it requires fitment of cases up to 30 ltr
107A Specific screen, transparent 50,8 x 66 cm (H x W)
A107A Specific fitting kit for 107A
LIBERTY S 50-125-200 (06 > 11)
SR107 Special rack for MONOLOCK® boxes it is necessary to remove the original grab handle / maximum load allowed 3 kg / use the plate included in the box
LIBERTY 50-125-150 (09 > 11)
SR132 Special rack for MONOLOCK® boxes maximum load allowed 3 kg / use the plate included in the box
E342 Specific rear plate for MONOLOCK® case maximum load allowed 3 Kg / it requires fitment of cases up to 30 ltr
107A Specific screen, transparent 50,8 x 66 cm (H x W)
A107A Specific fitting kit for 107A
SC132 Dry-Cool seat cover specific for Piaggio Liberty 50-125-150 (09 > 11)
TYPHOON 50-125 (11)
SR5602 Special rack for MONOLOCK® boxes maximum load allowed 3 kg / use the plate included in the box
288A Specific screen, transparent 56 x 71,5 cm (H x W)
A5602A Specific fitting kit, black for 289A
VESPA LX 50-125-150 (05 > 11)
SR105 Special rack for MONOLOCK® boxes use the plate included in the box
104A Specific screen, transparent 51,5 x 69,5 cm (H x W)
A104A Specific fitting kit for 104A
VESPA S 50-125-150 (07 > 11)
SR105 Special rack for MONOLOCK® boxes use the plate included in the box
355A � Specific screen, transparent 60 x 69 cm (H x W)
354A � Specific screen, transparent 60 x 69 cm (H x W) with fantasy serigraphy
A354A � Specific fitting kit for 354A and 355A
D202ST * Specific screen, transparent 60 x 74,4 cm (H x W) 10 cm higher and larger than D199ST and D199S
D199KIT Kit for spoilers D199S, D199ST and 202ST
* THE ITEM IS SOLD IN PACKS OF TWO PIECES EACH
Application Chart 2012.indb 124 13/03/12 10.16
29Aplikační tabulky GIVI 2012
CODE DESCRIPTION NOTE
125THE ITALIAN SIGN OF MOTODESIGN
PIAG
GIO
- SU
ZUKI
SYM
- TR
IUMP
H
ZIP 50-125 (00 > 11)
SR56 Special rack
* IN ORDER TO FIT THE MONOLOCK® BOXES USE THE PLATE INCLUDED; TO FIT THE MONOKEY® CASES USE THE E250 PLATE (WHICH IS SOLD SEPARATELY)
BEVERLY 125-200 (01 > 04)
E341 Specific rear plate for MONOLOCK® case maximum load allowed 6 kg
BEVERLY 125-250-400 (04 > 07)
E341 Specific rear plate for MONOLOCK® case maximum load allowed 6 kg / only for ’04 version
E344 Specific rear plate for MONOLOCK® case maximum load allowed 6 kg / compatible from model ’05
A350A � Specific fitting kit for 113A, 113AS and 114AS only available if article 113A, 113AS or 114AS is already fitted
BEVERLY TOURER 125-250-300-400 (08 > 10)
E344 Specific rear plate for MONOLOCK® case maximum load allowed 6 kg / use the plate included in the box
103A Specific screen, transparent 43,5 x 70 cm (H x W)
A103A Specific fitting kit for 103A
106A Specific screen, transparent 32 x 61,5 cm (H x W)
A106A Specific fitting kit for 106A
BEVERLY 125IE-300IE (10 > 11)
E349 Specific rear plate for MONOLOCK® case maximum load allowed 3 kg / use the plate included in the box
357A Specific screen, transparent 32 x 46 cm (H x W)
A357A Specific fitting kit for 357A
358A Specific screen, transparent 48,5 x 71 cm (H x W)
A358A Specific fitting kit for 358A
E109B Polyurethane backrest, brown, specific for Monolock® top-cases E370
CARNABY 125-200-250 (07 > 11)
E347 Specific rear plate for MONOLOCK® case maximum load allowed 3 kg / use the plate included in the box
113ASF � Specific screen, transparent with serigraphy 66 x 67 cm (H x W)
MP3 125-250-300-400 (06 > 11)
SR134 “Folding” specific plate for MONOKEY® boxes MONOKEY® plate M5 in nylon included / complete with polyurethane backrest / Allows hardware to be raised in order to fully open the rear trunk / maximum load allowed 6 kg
SR134M “Folding” specific plate for MONOLOCK® boxes MONOLOCK® plate M5M in nylon included / complete with polyurethane backrest / Allows hardware to be raised in order to fully open the rear trunk / maximum load allowed 6 kg
SR108 Special rack for MONOKEY® boxes complete with polyurethane backrest / MONOKEY® plate M5 in nylon / in order to fix you must remove the original backrest / maximum load allowed 6 kg
SR108M Special rack for MONOLOCK® boxes complete with polyurethane backrest / MONOLOCK® plate M5M in nylon / in order to fix you must remove the original backrest / maximum load allowed 6 kg
D501ST * Specific screen, transparent 82 x 64 cm (H x W) 40 cm higher than original (06-08 Model) / 24 cm higher than original (09 Model)
D502S Specific screen, smoked 58 x 46 cm (H x W) 16 cm higher than original (06>08 model) / The same height as the original (09 model)
D504ST Specific screen, transparent 74 x 64 cm (H x W) 32 cm higher than original (06>08 model) / 16 cm higher than original 09 model)
AF504 Specific sliding wind-screen, transparent, complete with fitting kit. Maximum height 74 cm (12 cm of extension) width 64 cm
TB106 � Specific backrest it cannot be mounted if rack and case are installed
* THE ITEM IS SOLD IN PACKS OF TWO PIECES EACH
MP3 YOURBAN 125-300 (11) NEW
SR5600 Special rack for MONOKEY® boxes maximum load allowed 6 kg / MONOKEY® plate M5 in nylon included
SR5600M Special rack for MONOLOCK® boxes maximum load allowed 6 kg / use the plate included in the box
SR5600MM Special rack for MONOLOCK® boxes maximum load allowed 6 kg / MONOLOCK® plate M6M in nylon included
5600DT Specific screen, transparent 67 x 74 cm (H x W) 35,5 cm higher than original
D5600KIT Specific fitting kit for 5600DT
Application Chart 2012.indb 125 13/03/12 10.16
30Aplikační tabulky GIVI 2012
CODE DESCRIPTION NOTE
126 THE ITALIAN SIGN OF MOTODESIGN� = Item available until it runs out of stock
PIAGGIO - SUZUKISYM - TRIUMPH
AF5600 Specific sliding wind-screen, transparent, complete with fitting kit. Maximum height 63 cm (12 cm of extension) width 74 cm
D5600ST Specific screen, transparent 57 x 44,5 cm (H x W) 25,5 cm higher than original
TB5600 Specific backrest it cannot be mounted if rack and case are installed
VESPA PX 125-150-200
642F � Specific Monorack arms only match the plates M3, MM
VESPA PX 125-150 (11 > 12) NEW
SR5603 Special rack for MONOLOCK® boxes maximum load allowed 6 kg / use the plate included in the box
642A Specific screen, transparent 54 x 62 cm (H x W)
A5603A Specific fitting kit for 642A
VESPA 125-200 GRANTURISMO (03 > 08)
104A Specific screen, transparent 51,5 x 69,5 cm (H x W)
A104A Specific fitting kit for 104A
X7 125-250 (08 > 11)
SR109 Special rack for MONOKEY® boxes MONOKEY® plate M5 in nylon included / it is neccessary to drill the handle and mudguard / maximum load allowed 6 kg
SR109M Special rack for MONOLOCK® boxes it is neccessary to drill the handle and mudguard / maximum load allowed 6 kg / use the plate included in the box
D503ST � Specific screen, transparent 62 x 56 cm (H x W) 17 cm higher than original
X7 EVO 125I-300I (09 > 10)
SR133 Special rack for MONOLOCK® boxes maximum load allowed 6 kg / use the plate included in the box
D503ST � Specific screen, transparent 62 x 56 cm (H x W) 17 cm higher than original
X8 125-150-200-250-400 (04 > 10)
SR102 Special rack for MONOKEY® boxes MONOKEY® plate M5 in nylon included
SR102M Special rack for MONOLOCK® boxes MONOLOCK® plate M5M in nylon included
D500ST Specific screen, transparent 80 x 60 cm (H x W) 20 cm higher than original
X9 125-180-250 (00 > 02)
SR54 Special rack for MONOKEY® boxes MONOKEY® plate M3 in nylon included
SR54M Special rack for MONOLOCK® boxes MONOLOCK® plate MM in nylon included
SR57 Special rack for MONOLOCK® boxes use the plate included in the box
D227ST � Specific screen, transparent 81,2 x 50,1 cm (H x W) for 250 cc version / only till years ’01
TB54 Specific backrest
X-EVO 125-250-400 (07 > 11)
SR102 Special rack for MONOKEY® boxes MONOKEY® plate M5 in nylon included
SR102M Special rack for MONOLOCK® boxes MONOLOCK® plate M5M in nylon included
D500ST Specific screen, transparent 80 x 60 cm (H x W) 20 cm higher than original
X9 200-250-500 EVOLUTION (03 > 08)
SR54 Special rack for MONOKEY® boxes MONOKEY® plate M3 in nylon included
SR54M Special rack for MONOLOCK® boxes MONOLOCK® plate MM in nylon included
SR57 Special rack for MONOLOCK® boxes use the plate included in the box
D229ST Specific screen, transparent 65 x 50 cm (H x W) 16 cm higher than original
TB54 Specific backrest
Application Chart 2012.indb 126 13/03/12 10.16
31Aplikační tabulky GIVI 2012
CODE DESCRIPTION NOTE
127THE ITALIAN SIGN OF MOTODESIGN
PIAG
GIO
- SU
ZUKI
SYM
- TR
IUMP
H
BEVERLY CRUISER 250 - 500 (07 > 11)
E345 Specific rear plate for MONOKEY® case MONOKEY® plate M5 in nylon included / Maximum load allowed 6 Kg
E345M Specific rear plate for MONOLOCK® case maximum load allowed 6 kg / use the plate included in the box
352A Specific screen, transparent with serigraphy 50,5 x 78,5 cm (H x W)
A352A Specific fitting kit for 352A
TB105 � Specific backrest it cannot be mounted if rack and case are installed
VESPA GTS 250 (06 > 11)
104A Specific screen, transparent 51,5 x 69,5 cm (H x W)
A104A Specific fitting kit for 104A
CARNABY CRUISER 300 (09 > 11)
E348 Specific rear plate for MONOLOCK® case maximum load allowed 3 kg / use the plate included in the box
356A Specific screen, transparent 50 x 77 cm (H x W)
A352A Specific fitting kit for 356A
MP3 TOURING 300 - 400 (11) NEW
SR134 “Folding” specific plate for MONOKEY® boxes MONOKEY® plate M5 in nylon included / complete with polyurethane backrest / Allows hardware to be raised in order to fully open the rear trunk / maximum load allowed 6 kg
SR134M “Folding” specific plate for MONOLOCK® boxes MONOLOCK® plate M5M in nylon included / complete with polyurethane backrest / Allows hardware to be raised in order to fully open the rear trunk / maximum load allowed 6 kg
SR108 Special rack for MONOKEY® boxes complete with polyurethane backrest / MONOKEY® plate M5 in nylon / in order to fix you must remove the original backrest / maximum load allowed 6 kg
SR108M Special rack for MONOLOCK® boxes complete with polyurethane backrest / MONOLOCK® plate M5M in nylon / in order to fix you must remove the original backrest / maximum load allowed 6 kg
D5601ST Specific screen, transparent 75 x 65 cm (H x W) 12 cm higher that the original
AF5601 Specific sliding wind-screen, transparent, complete with fitting kit. Maximum height 67 cm (12 cm of extension) width 65 cm
VESPA GTS 300 SUPER (08 > 11)
SR131 Special rack for MONOLOCK® boxes use the plate included in the box
104A Specific screen, transparent 51,5 x 69,5 cm (H x W)
A104A Specific fitting kit for 104A
SC131 Dry-Cool seat cover specific for Piaggio Vespa GTS 300 Super (08 > 11)
BEVERLY 500 (03 > 07)
E341 Specific rear plate for MONOLOCK® case maximum load allowed 6 kg / compatible with ’03 and ’04
E344 Specific rear plate for MONOLOCK® case maximum load allowed 6 kg / compatible from ’05
103A Specific screen, transparent 43,5 x 70 cm (H x W)
A103A Specific fitting kit for 103A
106A Specific screen, transparent 32 x 61,5 cm (H x W)
A106A Specific fitting kit for 106A
X9 500 (01 > 02)
SR54 Special rack for MONOKEY® boxes MONOKEY® plate M3 in nylon included
SR54M Special rack for MONOLOCK® boxes MONOLOCK® plate MM in nylon included
SR57 Special rack for MONOLOCK® boxes use the plate included in the box
TB54 Specific backrest
Application Chart 2012.indb 127 13/03/12 10.16
32Aplikační tabulky GIVI 2012
CODE DESCRIPTION NOTE
128 THE ITALIAN SIGN OF MOTODESIGN� = Item available until it runs out of stock
PIAGGIO - SUZUKISYM - TRIUMPH
SUZUKISIXTEEN 125-150 (08 > 11)
E532 � Specific rear plate for MONOLOCK® case use the plate included in the box
169A Specific screen, transparent with serigraphy 56,5 x 71,5 cm (H x W)
A169A Specific fitting kit for 169A
UH 125-150 BURGMAN (02 > 05)
SR114 Special rack for MONOLOCK® boxes use the plate included in the box / maximum load allowed 4 kg
D256ST Specific screen, transparent 83 x 53 cm (H x W) 20 cm higher than original
BURGMAN 125-200 K7-K8-K9-L0 (06 > 11)
SR118 Special rack for MONOLOCK® boxes you must puncture the housing in arranged sections / use the plate included in the box
SR117M Special rack for MONOLOCK® boxes MONOLOCK® plate M5M in nylon included / you must remove the grabrails, they are reproduced by the rack itself / maximum load allowed 3 kg
267DT * Specific screen, transparent 88,5 x 65,5 cm (H x W) 33 cm higher the original
D267KIT * Specific fitting kit for 267DT
D268ST Specific screen, transparent with serigraphy 72 x 67 cm (H x W) 17 cm higher than original
TB533 Specific backrest it cannot be mounted if rack and case are installed
* THE ITEM IS SOLD IN PACKS OF TWO PIECES EACH
AN 250-400 BURGMAN (98 > 02)
SR111 Special rack for MONOKEY® boxes MONOKEY® plate M3 in nylon included
SR111M Special rack for MONOLOCK® boxes MONOLOCK® plate MM in aluminium included
156D * Specific screen, smoked 72,5 x 79,5 cm (H x W)
156DT * Specific screen, transparent 72,5 x 79,5 cm (H x W)
D156KIT * Specific fitting kit for 156D and 156DT
* THE ITEM IS SOLD IN PACKS OF TWO PIECES EACH
AN 250-400 BUSINESS (01 > 03)
SR112 Special rack for MONOKEY® boxes MONOKEY® plate M5 in nylon included / maximum load allowed 3 kg
156D * Specific screen, smoked 72,5 x 79,5 cm (H x W)
156DT * Specific screen, transparent 72,5 x 79,5 cm (H x W)
D156KIT * Specific fitting kit for 156D and 156DT
* THE ITEM IS SOLD IN PACKS OF TWO PIECES EACH
AN 250-400 BURGMAN (03 > 06)
SR115 Special rack for MONOKEY® boxes MONOKEY® plate M5 in nylon included
D258ST Specific screen, transparent 80 x 71 cm (H x W) 17 cm higher than original
TU 250X (97 > 04)
A601 Universal screen with 2 point handlebar, bronzè 36,9 x 42,5 cm (H x W)
AN 400 BURGMAN TYPE-S (05)
D258ST Specific screen, transparent 80 x 71 cm (H x W) 17 cm higher than original
BURGMAN 400 K7-K8-K9 (06 > 11)
E531 Specific rear plate for MONOKEY® case MONOKEY® plate M5 in nylon included/ it is neccesary to puncture the housing behind the saddle
E531M Specific rear plate for MONOLOCK® case MONOLOCK® plate M5M in nylon included/ it is neccesary to puncture the housing behind the saddle
266DT Specific screen, transparent 84 x 68 cm (H x W) 16 cm higher than original
D266KIT Specific fitting kit for 266DT
Application Chart 2012.indb 128 13/03/12 10.16
33Aplikační tabulky GIVI 2012
CODE DESCRIPTION NOTE
129THE ITALIAN SIGN OF MOTODESIGN
PIAG
GIO
- SU
ZUKI
SYM
- TR
IUMP
H
AF266 Specific sliding wind-screen, transparent, complete with fitting kit. Maximum height 81 cm (12 cm of extension) width 67 cm
TB531 Specific backrest it can be mounted only if rack and case are installed
TB532 � Specific backrest it cannot be mounted if rack and case are installed
GS 500 E (97 > 00)
524F � Specific Monorack arms only match the plates M3, MM
GS 500 E (01 > 07) / GS 500 F (04)
526F Specific Monorack arms only match the plates M3, MM
GSF 600 BANDIT / S (96 > 99)
511F Specific Monorack arms only match the plates M3, MM
TN392 Specific engine guard we recommend fitting by a qualified mechanic
GSF 600 BANDIT / S (00 > 04)
522F Specific Monorack arms only match the plates M3, MM
PL522 Tubular pannier holder for MONOKEY® boxes
D252S Specific screen, smoked 44,8 x 39,7 cm (H x W) for faired version
TN392 Specific engine guard we recommend fitting by a qualified mechanic
GSR 600 (06 > 11)
SR116 Special rack for MONOKEY® boxes MONOKEY® plate M5 in nylon included/ you must remove the grabrails / maximum load allowed 6 kg
SR116M Special rack for MONOLOCK® boxes MONOLOCK® plate M5M in nylon included / you must remove the grabrails / maximum load allowed 6 kg
PLX538 Tubular pannier holder for V35 MONOKEY® SIDE cases you can mount only V35 MONOKEY® SIDE CASES/ mounting is only possible with SR116 / SR116M
A167A * Specific fitting kit for 245A, 245N and 246_ _ _ it requires the fitting of 245N painted black internally as not to reflect the light / compatible with ’06 and ’07
A170A * Specific fitting kit for 247A and 247N compatible only with ’08 model
T255 Tubular side holder for soft luggage to be mounted only with SR116 / SR116M
TN535 Specific engine guard we recommend fitting by a qualified mechanic
BF01 Specific metal flange for fitting the TankLock tank bags
* YOU CAN FIND SPOILERS PRICES ON PAGE 48
GSX 600 F (98 > 02)
518F Specific Monorack arms only match the plates M3, MM
GSX 600 F (03 > 06)
530FZ Specific Monorack arms only match the plates M5, M5M, M6M
GSX R 600 / 750 (08 > 10)
BF01 Specific metal flange for fitting the TankLock tank bags
AN 650 BURGMAN EXECUTIVE (02 > 11)
E529 Specific rear plate for MONOKEY® case the rack cannot be mounted in conjunction with the TB529 / MONOKEY® plate M5 in nylon / in order to fix you must remove the original backrest
E529M Specific rear plate for MONOLOCK® case the rack cannot be mounted in conjunction with the TB529 / MONOLOCK® plate M5M in nylon / in order to fix you must remove the original backrest
D257ST Specific screen, transparent 80 x 72 cm (H x W) compatible with all years ’04
D263ST Specific screen, transparent 78,5 x 72 cm (H x W) for models having electrically adjustable screen / compatable from ’05
DL 650 V-STROM (04 > 11)
E528 Specific rear plate for MONOKEY® case MONOKEY® plate E250 included
E528M Specific rear plate for MONOLOCK® case use the plate included in the box
PL532 Tubular pannier holder for MONOKEY® boxes
Application Chart 2012.indb 129 13/03/12 10.16
PIAG
GIO
- SU
ZUKI
SYM
- TR
IUMP
H
34Aplikační tabulky GIVI 2012
CODE DESCRIPTION NOTE
130 THE ITALIAN SIGN OF MOTODESIGN� = Item available until it runs out of stock
PIAGGIO - SUZUKISYM - TRIUMPH
PLR532 Rapid release tubular side-case holder for MONOKEY® cases
PLX532 Tubular pannier holder for V35 MONOKEY® SIDE cases you can mount only V35 MONOKEY® SIDE CASES
D260ST Specific screen, transparent 57 x 48 cm (H x W) 18 cm higher than original / only with spoiler
AF260 Specific sliding wind-screen for, transparent, complete with fitting kit. Maximum height 65 cm (12 cm of extension) width 44 cm
TN532 Specific engine guard we recommend fitting by a qualified mechanic
BF10 Specific metal flange for fitting the TankLock tank bags
DL 650 V-STROM L2 (11 > 12) NEW
SR3101 Special rack for MONOKEY® boxes MONOKEY® plate E250 in nylon included
SR3101M Special rack for MONOLOCK® boxes use the plate included in the box
SRA3101 Special rack in aluminium for Monokey® cases, black maximum load allowed 6 kg / It does not allow the assembly of the stop light kit or the remote control device on the case
PL3101 Tubular pannier holder for MONOKEY® boxes
PLR3101 Rapid release tubular side-case holder for MONOKEY® cases
PLX3101 Tubular pannier holder for V35 MONOKEY® SIDE cases you can mount only V35 MONOKEY® SIDE CASES
AF3101 Specific sliding wind-screen , transparent, complete with fitting kit. Maximum height 56 cm (12 cm of extension) width 43 cm
3101DT Specific screen, transparent 52 x 46 cm (H x W)
D3101KIT Specific fitting kit for 3101DT
TN532 Specific engine guard we recommend fitting by a qualified mechanic
RP3101 Oil carter protector in Aluminium
BF01 Specific metal flange for fitting the TankLock tank bags
GLADIUS 650 (09 > 11)
SR121 Special rack for MONOKEY® boxes MONOKEY® plate M5 in nylon included / you must remove the grabrails, they are reproduced by the rack itself / maximum load allowed 6 kg
SR121M Special rack for MONOLOCK® boxes MONOLOCK® plate M5M in nylon included / you must remove the grabrails, they are reproduced by the rack itself / maximum load allowed 6 kg
PLX540 Tubular pannier holder for V35 MONOKEY® SIDE cases you can mount only V35 MONOKEY® SIDE CASES
A172 Specific screen, smoked 29,5 x 30,5 cm (H x W) including fixing kit
A172S Specific screen, black and grey 29,5 x 30,5 cm (H x W) including fixing kit
T256 Tubular side holder for soft luggage
BF01 Specific metal flange for fitting the TankLock tank bags
GSF 650 BANDIT / BANDIT S / BANDIT ABS (05 > 06)
539FZ Specific Monorack arms only match the plates M5, M5M, M6M
PL534 � Tubular pannier holder for MONOKEY® you must move from there original position / only for version without ABS
D262S Specific screen, smoked 45,7 x 3,6,5 cm (H x W) 11,7 cm higher than original / for semi faired version
GSF 650 BANDIT / GSF 650 BANDIT S K7-K8 (07 > 11)
539FZ Specific Monorack arms only match the plates M5, M5M, M6M
PL539 Tubular pannier holder for MONOKEY® boxes you must move the indicators from their original position
PLX539 Tubular pannier holder for V35 MONOKEY® SIDE cases you can mount only V35 MONOKEY® SIDE CASES / you must move the indicators from their original position
A168A Specific fitting kit for 245A and 245N it will be necessary to remove the original painted trim above the headlight / it requires the fitting of 245N painted black internally as not to reflect the light
D262S Specific screen, smoked 45,7 x 36,5 cm (H x W) 11,7 cm higher than original / for semi faired version
TN539 Specific engine guard we recommend fitting by a qualified mechanic
* IMPORTANT: SINCE 2009 IN SOME COUNTRIES IS AVAILABLE THE MODEL BANDIT K9, WHILE IN SOME OTHER COUNTRIES IS STILL SOLD THE PREVIOUS MODEL K7-K8.
GSF 650 BANDIT / GSF 650 BANDIT S K9 (09 > 11)
540FZ Specific Monorack arms only match the plates M5, M5M, M6M
PLXR541 Rapid release tubular side-case holder for MONOKEY® SIDE cases you must move the indicators from their original position / you can mount only V35 MONOKEY® SIDECASES® SIDE V35 / can be mounted without the Monorack
BF01 Specific metal flange for fitting the TankLock tank bags
* IMPORTANT: SINCE 2009 IN SOME COUNTRIES IS AVAILABLE THE MODEL BANDIT K9, WHILE IN SOME OTHER COUNTRIES IS STILL SOLD THE PREVIOUS MODEL K7-K8.
Application Chart 2012.indb 130 13/03/12 10.16
PIAGGIO - SUZUKISYM - TRIUMPH
35Aplikační tabulky GIVI 2012
CODE DESCRIPTION NOTE
131THE ITALIAN SIGN OF MOTODESIGN
PIAG
GIO
- SU
ZUKI
SYM
- TR
IUMP
H
GSX 650F (08 > 11)
539FZ Specific Monorack arms only match the plates M5, M5M, M6M
PL539 Tubular pannier holder for MONOKEY® boxes you must move the indicators from their original position
PLX539 Tubular pannier holder for V35 MONOKEY® SIDE cases you can mount only V35 MONOKEY® SIDE CASES / you must move the indicators from their original position
D270S Specific screen, smoked 45 x 38,5 cm (H x W) 10 cm higher than original
BF01 Specific metal flange for fitting the TankLock tank bags
SV 650 / SV 650 S (99 > 02)
521FL Specific Monorack arms only match the plate M35
SV 650 / SV 650 S (03 > 08)
529FZ Specific Monorack arms only match the plates M5, M5M, M6M
GSX 750 (98 > 02)
517F Specific Monorack arms only match the plates M3, MM
TN392 Specific engine guard we recommend fitting by a qualified mechanic
GSX 750 F (98 > 02)
518F Specific Monorack arms only match the plates M3, MM
GSX 750 F (03 > 06)
530FZ Specific Monorack arms only match the plates M5, M5M, M6M
GSR 750 (11) NEW
3100FZ Specific Monorack arms only match the plates M5, M11, M5M, M6M
A3100 Specific screen, smoked 32 x 30 cm (H x W) including fixing kit
TE3100 Specific tubular holder for Easylock bags; it can be used also as holder for soft luggage can be mounted without the Monorack using the 3100KIT / you must move the indicators from their original position
3100KIT Specific kit to install the TE3100 without the Monorack
BF01 Specific metal flange for fitting the TankLock tank bags
VS 800 INTRUDER
A10 Specific screen, bronze 37,1 x 39,2 cm (H x W) only available if article A93A is already fitted
DL 1000 V-STROM (02 > 11)
E528 Specific rear plate for MONOKEY® case MONOKEY® plate E250 included
E528M Specific rear plate for MONOLOCK® case use the plate included in the box
PL528 Tubular pannier holder for MONOKEY® boxes
PLX528 Tubular pannier holder for V35 MONOKEY® SIDE cases you can mount only V35 MONOKEY® SIDE CASES
D255ST Specific screen, transparent 60 x 37,5 cm (H x W) only with spoiler / 16 cm higher than original / compatable from ’02 to ’03
D260ST Specific screen, transparent 57 x 48 cm (H x W) 18 cm higher than original / only with spoiler / compatible from year ’04
AF260 Specific sliding wind-screen, transparent, complete with fitting kit. Maximum height 65 cm (12 cm of extension) width 44 cm compatible from year ’04
TN528 Specific engine guard we recommend fitting by a qualified mechanic
BF10 Specific metal flange for fitting the TankLock tank bags
SV 1000 / SV 1000 S (03 > 08)
529FZ Specific Monorack arms only match the plates M5, M5M, M6M
GSX 1200 (98 > 02)
517F Specific Monorack arms only match the plates M3, MM
Application Chart 2012.indb 131 13/03/12 10.16
36Aplikační tabulky GIVI 2012
CODE DESCRIPTION NOTE
132 THE ITALIAN SIGN OF MOTODESIGN� = Item available until it runs out of stock
PIAGGIO - SUZUKISYM - TRIUMPH
GSF 1200 BANDIT (96 > 99)
511F Specific Monorack arms only match the plates M3, MM
GSF 1200 BANDIT / BANDIT S (00 > 05)
522F Specific Monorack arms only match the plates M3, MM
PL523 Tubular pannier holder for MONOKEY® boxes You must move from there original position
D252S Specific screen, smoked 44,8 x 39,7 cm (H x W) only for faired version
GSF 1200 BANDIT / BANDIT S (06)
539FZ Specific Monorack arms only match the plates M5, M5M, M6M
D262S Specific screen, smoked 45,7 x 36,5 cm (H x W) 11,7 cm higher than original / for semi faired version
GSF 1250 BANDIT / BANDIT S (07 > 11)
539FZ Specific Monorack arms only match the plates M5, M5M, M6M
PL539 Tubular pannier holder for MONOKEY® boxes you must move the indicators from their original position
PLX539 Tubular pannier holder for V35 MONOKEY® SIDE cases you can mount only V35 MONOKEY® SIDE CASES / you must move the indicators from their original position
A168A Specific fitting kit for 245N it requires the fitting of 245N painted black internally as not to reflect the light
D262S Specific screen, smoked 45,7 x 36,5 cm (H x W) 11,7 cm higher than original / for semi faired version
GSX 1300R HAYABUSA (08 > 11)
541FZ Specific Monorack arms only match the plates M5, M5M, M6M / A larger grab rail for the passenger is included, you must remove the original grab rails / maximum load allowed 6 Kg
GSX 1400 (02 > 09)
527FZ Specific Monorack arms only match the plates M5, M5M, M6M
PL527 � Tubular pannier holder for MONOKEY® mounting is only possible with Monorack arms / compatible with models from ’02 to June ’05
TN394 � Specific engine guard we recommend fitting by a qualified mechanic / compatible with models from July ’05
SYMFIDDLE II 50-125 (09 > 11)
293A Specific screen, transparent 50 x 63 cm (H x W)
A293A Specific fitting kit for 293A
SYMPHONY 50-125-151 (09 > 11)
E292 � Specific rear plate for MONOLOCK® case maximum load allowed 3 kg / use the plate included in the box
294A Specific screen, transparent 52 x 63 cm (H x W)
296A Specific screen, transparent with serigraphy 52 x 63 cm (H x W)
A294A Specific fitting kit for 294A-296A Only for 50 cc. version
A295A Specific fitting kit for 294A-296A Only for 125 cc. version
107A Specific screen, transparent 50,8 x 66 cm (H x W)
A299A Specific fitting kit for 107A
SYMPHONY SR 50-125-151 (10 > 11)
297A Specific screen, transparent 62 x 71 cm (H x W)
A297A Specific fitting kit for 297A
Application Chart 2012.indb 132 13/03/12 10.16
37Aplikační tabulky GIVI 2012
CODE DESCRIPTION NOTE
133THE ITALIAN SIGN OF MOTODESIGN
PIAG
GIO
- SU
ZUKI
SYM
- TR
IUMP
H
SYMPLY 125 (08 >09)
105A Specific screen, transparent 66 x 67 cm (H x W)
128A Specific screen, transparent 74 x 67 cm (H x W) 8 cm higher than 105A
YOU CAN FIT A MONOLOCK® TOP-CASE USING THE UNIVERSAL PLATE INCLUDED.
JOYRIDE 125-150-200 (01 > 08)
SR99 � Special rack
* IN ORDER TO FIT THE MONOLOCK® BOXES USE THE PLATE INCLUDED; TO FIT THE MONOKEY® CASES USE THE E250 PLATE (WHICH IS SOLD SEPARATELY)
JOYRIDE EVO 125-200 (09 > 11)
SR233 � Special rack for MONOKEY® boxes MONOKEY® plate M5 in nylon included / maximum load allowed 6 kg
SR233M � Special rack for MONOLOCK® boxes maximum load allowed 6 kg / use the plate included in the box
D651ST Specific screen, transparent 62 x 60 cm (H x W) 15,5 cm cm higher than original
HD 125-200 (05 > 07)
105A Specific screen, transparent 66 x 67 cm (H x W) only available if article A290A is already fitted
128A Specific screen, transparent 74 x 67 cm (H x W) 8 cm higher than 105A / only available if article A290A is already fitted
HD EVO 125-200 (07 > 11)
E291 Specific rear plate for MONOLOCK® case use the plate included in the box
105A Specific screen, transparent 66 x 67 cm (H x W)
128A Specific screen, transparent 74 x 67 cm (H x W) 8 cm higher than 105A
A291A � Specific fitting kit for 105A and 128A
A298A Specific fitting kit for 105A and 128A
HD2 125-200 (11) NEW
128A Specific screen, transparent 74 x 67 cm (H x W) 8 cm higher than 105A
105A Specific screen, transparent 66 x 67 cm (H x W)
A7050A Specific fitting kit for 105A and 128A
JOYMAX 250 (05 > 08) / JOYMAX EVO (09 > 11)
SR230 Special rack
SR232 Special rack for MONOLOCK® boxes maximum load allowed 6 kg / use the plate included in the box
* IN ORDER TO FIT THE MONOLOCK® BOXES USE THE PLATE INCLUDED; TO FIT THE MONOKEY® CASES USE THE E250 PLATE (WHICH IS SOLD SEPARATELY)
CITYCOM 300 (08 > 11)
SR231 Special rack for MONOKEY® boxes MONOKEY® plate M5 in nylon included / you must puncture the housing in arranged sections
SR231M Special rack for MONOLOCK® boxes you must puncture the housing in arranged sections / use the plate included in the box
D650ST Specific screen, transparent 64 x 55 cm (H x W) 19 cm higher than original
MAXSYM 400 (11) NEW
SR7051 Special rack for MONOKEY® boxes MONOKEY® plate M5 in nylon included
SR7051M Special rack for MONOLOCK® boxes MONOLOCK® plate M5M in nylon included
7051DT Specific screen, transparent 74 x 64 cm (H x W) 12 cm higher than original
D7051KIT Specific fitting kit for 7051DT
Application Chart 2012.indb 133 13/03/12 10.16
38Aplikační tabulky GIVI 2012
CODE DESCRIPTION NOTE
134 THE ITALIAN SIGN OF MOTODESIGN� = Item available until it runs out of stock
PIAGGIO - SUZUKISYM - TRIUMPH
TRIUMPHSTREET TRIPLE 675 (07 > 11)
727FZ Specific Monorack arms only match the plates M5, M5M, M6M
TN226 � Specific engine guard we recommend fitting by a qualified mechanic
TE705 Specific tubular holder for Easylock bags; it can be used also as holder for soft luggage
BF02 Specific metal flange for fitting the TankLock tank bags
BONNEVILLE 865
SR226 Special rack, chromed
* IN ORDER TO FIT THE MONOLOCK® BOXES USE THE PLATE INCLUDED; TO FIT THE MONOKEY® CASES USE THE E250 PLATE (WHICH IS SOLD SEPARATELY)
TIGER 800 / TIGER 800 XC (11) NEW
SR6401 Special rack for MONOKEY® boxes maximum load allowed 6 kg / MONOKEY® plate M5 in nylon included / it is neccesary to puncture the housing behind the saddle
SRA6401 Special rack in aluminium for Monokey® cases maximum load allowed 6 kg / It does not allow the assembly of the stop light kit or the remote control device on the case / you must puncture the housing in arranged sections
PLR6401 Rapid release tubular side-case holder for MONOKEY® cases
6401DT Specific screen, transparent 53 x 46,5 cm (H x W) 17 cm higher than original
D6401KIT Specific fitting kit for 6401DT
AF6401 Specific sliding wind-screen, transparent, complete with fitting kit. Maximum height 60,5 cm (12 cm of extension) width 45,5 cm
TN6401 Specific engine guard we recommend fitting by a qualified mechanic
BF02 Specific metal flange for fitting the TankLock tank bags
TIGER 955 (00 > 01)
E250 Universal rear plate complete with fitting kit for MONOKEY®. to fit to the original rack
TIGER 1050 (07 > 11)
SR225 Special rack for MONOKEY® boxes MONOKEY® plate M5 in nylon included / maximum load allowed 6 Kg / it is not compatible with the original sidecase holder
PL727 Tubular pannier holder for MONOKEY® boxes is mounted in conjuction with Monorack
D225ST Specific screen, transparent 50,5 x 49,3 cm (H x W) 12,5 cm higher than original
TN225 Specific engine guard we recommend fitting by a qualified mechanic
T704 Tubular side holder for soft luggage can be mounted without the SR225 using the T700KIT
T700KIT Specific kit to install the T704 without the plate
BF02 Specific metal flange for fitting the TankLock tank bags
ST 1050 SPRINT (05 > 11)
726FZ Specific Monorack arms only match the plates M5, M5M, M6M
D224S � Specific screen, smoked 49,5 x 39 cm (H x W) only with spoiler / 12 cm higher than original
BF02 Specific metal flange for fitting the TankLock tank bags
SPEED TRIPLE 1050 (08 > 10)
T702 Tubular side holder for soft luggage for models from ’08
BF02 Specific metal flange for fitting the TankLock tank bags
SPEED TRIPLE 1050 (11) NEW
TE6402 Specific tubular holder for Easylock bags; it can be used also as holder for soft luggage
SPRINT GT 1050 (10 > 11) NEW
SRA227 Special rack in aluminium for Monokey® cases, black it can be fit with the original side-case / maximum load allowed 6 kg / It does not allow the assembly of the stop light kit or the remote control device on the case
D6400S Specific screen, smoked 49,5 x 38,5 cm (H x W) including the kit to specific attachments
BF02 Specific metal flange for fitting the TankLock tank bags
Application Chart 2012.indb 134 13/03/12 10.16
39Aplikační tabulky GIVI 2012
CODE DESCRIPTION NOTE
135THE ITALIAN SIGN OF MOTODESIGN
YAMA
HA
YAMAHABW’S 50 (05 > 11)
SR356 Special rack for MONOLOCK® boxes it is necessary to remove the original grab handle / use the plate included in the box
NEO’S 50-100 (97 > 02)
SR86 Special rack for MONOLOCK® boxes use the plate included in the box
NEO’S 50 (08 > 11)
SR366 Special rack for MONOLOCK® boxes use the plate included in the box
105A Specific screen, transparent 66 x 67 cm (H x W)
128A Specific screen, transparent 74 x 67 cm (H x W) 8 cm higher than 105A
A285A Specific fitting kit for 105A and 128A
BW’S 125 (10 > 11)
SR372 Special rack for MONOLOCK® boxes maximum load allowed 3 kg / use the plate included in the box / you must remove the grab rails, they are replaced by the rack itself
288A Specific screen, transparent 56 x 71,5 cm (H x W)
A288A Specific fitting kit, black for 288A
CIGNUS X 125 (04 > 06)
SR354 Special rack for MONOLOCK® boxes use the plate included in the box
CIGNUS X 125 (07 > 11)
SR354 Special rack for MONOLOCK® boxes use the plate included in the box
102A Specific screen, transparent 66 x 68 cm (H x W)
128A Specific screen, transparent 74 x 67 cm (H x W) 8 cm higher than 105A
A283A Specific fitting kit for 102A and 128A
MAJESTY 125-150 (99 > 00)
SR43 � Special rack
* IN ORDER TO FIT THE MONOLOCK® BOXES USE THE PLATE INCLUDED; TO FIT THE MONOKEY® CASES USE THE E250 PLATE (WHICH IS SOLD SEPARATELY)
MAJESTY 125-150-180 (01 > 11)
SR46 Special rack for MONOKEY® boxes MONOKEY® plate M5 in nylon included
SR46M Special rack for MONOLOCK® boxes use the plate included in the box
130DT Specific screen, transparent 69,2 x 68,2 cm (H x W)
D130KIT Specific fitting kit for 130DT
VITY 125 (10 > 11)
SR373 Special rack for MONOLOCK® boxes maximum load allowed 3 kg / use the plate included in the box
288A Specific screen, transparent 56 x 71,5 cm (H x W)
A289A Specific fitting kit, black for 289A
X-CITY 125-250 (07 > 11)
SR361 Special rack for MONOLOCK® boxes maximum load allowed 6 Kg / use the plate included in the box
D439ST Specific screen, transparent with serigraphy 71 x 77 cm (H x W) 22 cm higher than original
XENTER 125-150 (12) NEW
SR2102 Special rack maximum load allowed 6 kg
Application Chart 2012.indb 135 13/03/12 10.16
YAMA
HA
40Aplikační tabulky GIVI 2012
CODE DESCRIPTION NOTE
136 THE ITALIAN SIGN OF MOTODESIGN� = Item available until it runs out of stock
YAMAHA
D2102ST Specific screen, transparent 65 x 70 cm (H x W) 14 cm higher than original
* IN ORDER TO FIT THE MONOLOCK® BOXES USE THE PLATE INCLUDED; TO FIT THE MONOKEY® CASES USE THE E250 PLATE (WHICH IS SOLD SEPARATELY)
X-MAX 125-250 (05 > 09)
SR355 Special rack for MONOKEY® boxes you must puncture the housing in arranged sections / MONOKEY® plate M5 in nylon inlcuded
SR355M Special rack for MONOLOCK® boxes you must puncture the housing in arranged sections / use the plate included in the box
D438ST Specific screen, transparent 63,5 x 69,5 cm (H x W) 25,5 cm higeher than original
TB49 Specific backrest it cannot be mounted if rack and case are installed
X-MAX 125-250 (10 > 11)
SR370 Special rack for MONOKEY® boxes maximum load allowed 6 kg / MONOKEY® plate M5 in nylon included / it is neccesary to puncture the housing behind the saddle
SR370M Special rack for MONOLOCK® boxes maximum load allowed 6 kg / it is neccesary to puncture the housing behind the saddle / use the plate included in the box
TB55 Specific backrest it cannot be mounted if rack and case are installed
446DT Specific screen, transparent 73,5 x 63 cm (H x W) 30 cm higher than original
D446KIT Specific fitting kit for 446DT
AF446 Specific sliding wind-screen, transparent, complete with fitting kit. Maximum height 70 cm (12 cm of extension), width 62 cm
D446B Specific sports screen 37 x 43 cm (H x W)
XT 125 R/X (05 > 11)
E332 Specific rear plate for MONOLOCK® case maximum load allowed 6 kg / use the plate included in the box
MAJESTY 250 (96 > 99)
SR42 � Special rack for MONOKEY® boxes MONOKEY® plate M2 in aluminium included
SR42M � Special rack for MONOLOCK® boxes MONOLOCK® plate MM in aluminium included
D115ST * Specific screen, transparent 73 x 79 cm (H x W)
* THE ITEM IS SOLD IN PACKS OF TWO PIECES EACH
MAJESTY 250 (00 > 07)
SR44 � Special rack for MONOKEY® boxes MONOKEY® plate M3 in nylon included
SR44M � Special rack for MONOLOCK® boxes MONOLOCK® plate MM in aluminium included
D124ST * Specific screen, transparent 80 x 70,7 cm (H x W) with air intake
D127ST * Specific screen, transparent 80 x 70,7 cm (H x W) without moulding steel / without a hole for the air
* THE ITEM IS SOLD IN PACKS OF THREE PIECES EACH
XV 250 VIRAGO ( > 99)
A10 Specific screen, bronze 37,1 x 39,2 cm (H x W) only available if article A93A is already fitted
A14 Specific screen, transparent 38,7 x 40,8 cm (H x W) low and transparent version
XC 300 VERSITY (03 > 07)
D432ST Specific screen, transparent 72 x 75 cm (H x W) 22 cm higher than original
TB50 � Specific backrest it cannot be mounted if rack and case are installed
MAJESTY 400 (04 > 08)
E331 Specific rear plate for MONOKEY® case MONOKEY® plate M5 in nylon included
E331M Specific rear plate for MONOLOCK® case MONOLOCK® plate M5M in nylon included
D137ST Specific screen, transparent 74 x 64 cm (H x W) 4 cm higher than the original
TB47 Specific backrest it can be mounted only if rack and case are installed
TB48 Specific backrest it cannot be mounted if rack and case are installed / compatible from ’04 to ’06
Application Chart 2012.indb 136 13/03/12 10.16
YAMAHA
41Aplikační tabulky GIVI 2012
CODE DESCRIPTION NOTE
137THE ITALIAN SIGN OF MOTODESIGN
YAMA
HA
MAJESTY 400 (09 > 11)
E331 Specific rear plate for MONOKEY® case MONOKEY® plate M5 in nylon included
E331M Specific rear plate for MONOLOCK® case MONOLOCK® plate M5M in nylon included
D445B � Specific sports screen, black. 66 x 44 cm (H x W)
445DT Specific screen, transparent 86 x 66 cm (H x W) 22.5 cm higher than original
D445KIT Specific fitting kit for 445DT
AF445 Specific sliding wind-screen, transparent, complete with fitting kit. Maximum height 79.3 cm (12 cm of extension) width 65 cm
TB48 Specific backrest it cannot be mounted if rack and case are installed
TB47 Specific backrest it can be mounted only if rack and case are installed
T277 Tubular side holder for soft luggage
T-MAX 500 (01 > 07)
SR45 Special rack for MONOKEY® boxes MONOKEY® plate M5 in nylon included
D128ST * Specific screen, transparent 80,1 x 64,5 cm (H x W)
D128B Specific sports screen , smoked 52 x 44,5 cm (H x W)
TB45 Specific backrest
TB51 Specific backrest it cannot be mounted if rack and case are installed
T272 Tubular side holder for soft luggage
* THE ITEM IS SOLD IN PACKS OF TWO PIECES EACH
T-MAX 500 (08 > 11)
SR364 Special rack for MONOKEY® boxes maximum load allowed 6 kg / MONOKEY® plate M5 in nylon included / it is neccesary to puncture the housing behind the saddle
SR364M Special rack for MONOLOCK® boxes maximum load allowed 6 kg / MONOLOCK® plate M5M in nylon included / it is neccesary to puncture the housing behind the saddle
SR2013 Special rack for MONOKEY® boxes MONOKEY® plate M5 in nylon included / maximum load allowed 6 Kg
SR2013M Special rack for MONOLOCK® boxes MONOLOCK® plate M5M in nylon included / maximum load allowed 6 Kg
SR369 � Special rack for MONOKEY® boxes Can not be mounted with art. TB52 or T273 / MONOKEY® plate M5 in nylon included / maximum load allowed 5 Kg / It is necessary to drill the tail fairing of the scooter in the indicated points to mount it
SR369M � Special rack for MONOLOCK® boxes MONOLOCK® plate M5M in nylon included / it is necessary to drill the tail fairing of the scooter in the indicated points to mount it / maximum load allowed 5 Kg / Can not be mounted with art. TB52 or T273
SR2100 Special rack for MONOKEY® boxes maximum load allowed 5 kg / MONOKEY® plate M5 in nylon included / It can only be mounted to the original alluminium rack, which is available as an optional extra from the manufacturer company
D442B Specific screen, black 59 x 45 cm (H x W) including two rubber stoppers to close the holes of mirrors for those who want to move from the original place
D442ST Specific screen, transparent 50 x 57 cm (H x W) 16 cm higher than the original
AF442 Specific sliding wind-screen, transparent, complete with fitting kit. Maximum height 90 cm (12 cm of extension) width 58 cm
TB52 � Specific backrest to be mounted only with specific carrier
TB53 Specific backrest it cannot be mounted if rack and case are installed / you must puncture the housing in arranged sections
T273 Tubular side holder for soft luggage
SC2013 Dry-Cool seat cover specific for Yamaha T-Max 530 (12) and Yamaha T-Max 500 (08 > 11)
T-MAX 530 (12) NEW
SR2013 Special rack for MONOKEY® boxes MONOKEY® plate M5 in nylon included / maximum load allowed 6 Kg
SR2013M Special rack for MONOLOCK® boxes MONOLOCK® plate M5M in nylon included / maximum load allowed 6 Kg
D2013ST Specific screen, transparent 65 x 61 cm (H x W)
SC2013 Dry-Cool seat cover specific for Yamaha T-Max 530 (12) and Yamaha T-Max 500 (08 > 11)
XV 535 VIRAGO (89 > 00)
A10 Specific screen, bronze 37,1 x 39,2 cm (H x W) only available if article A93A is already fitted
A14 Specific screen, transparent 38,7 x 40,8 cm (H x W) low and transparent version
FZS 600 FAZER (98 > 99)
340F Specific Monorack arms only match the plates M3, MM
D122S Specific screen, smoked 42 x 34,4 cm (H x W)
Application Chart 2012.indb 137 13/03/12 10.16
42Aplikační tabulky GIVI 2012
CODE DESCRIPTION NOTE
138 THE ITALIAN SIGN OF MOTODESIGN� = Item available until it runs out of stock
YAMAHA
FZS 600 FAZER (00 > 03)
340F Specific Monorack arms only match the plates M3, MM
D122S Specific screen, smoked 42 x 34,4 cm (H x W) compatible from ’00 to ’01
FZ6/FZ6 600 FAZER (04 > 06)
351FZ Specific Monorack arms only match the plates M5, M5M, M6M
PL351 Tubular pannier holder for MONOKEY® boxes can be mounted without the Monorack using the 351KIT
PLX351 Tubular pannier holder for V35 MONOKEY® SIDE cases you can mount only V35 MONOKEY® SIDE CASES / is mounted in conjuction with Monorack
D136ST Specific screen, transparent 61 x 53,5 cm (H x W) 12,5 cm higher than original / for faired version
140D Specific screen, smoked 35 x 36cm (H x W) not for faired version
D140KIT Specific fitting kit for 140D
TN358 Specific engine guard we recommend fitting by a qualified mechanic / mount with central tripod mounted
T351 Tubular side holder for soft luggage can be mounted without the Monorack using the 351KIT
351KIT Specific kit to install the PL351 and T351 without the Monorack
BF05 Specific metal flange for fitting the TankLock tank bags
FZ6 S2 / FZ6 600 FAZER S2 (07 > 11)
351FZ Specific Monorack arms only match the plates M5, M5M, M6M
PL360 Tubular pannier holder for MONOKEY® boxes can be mounted without the Monorack using the 351KIT
PLX360 Tubular pannier holder for V35 MONOKEY® SIDE cases you can mount only V35 MONOKEY® SIDE CASES / can be mounted without the Monorack using the 351KIT
440D Specific screen, transparent 57 x 57 cm (H x W) 19 cm higher than the original / for faired version
D440KIT Specific fitting kit for 440D for faired version
D441S Specific screen, smoked 54 x 33,5 cm (H x W) 16 cm higher than original / does not need attaches / for faired version
A284A * � Specific fitting kit for 245A, 245N, 246_ _ _ not for faired version
TN358 Specific engine guard we recommend fitting by a qualified mechanic / mount with central tripod mounted
TE351 Specific tubular holder for Easylock bags; it can be used also as holder for soft luggage can be mounted without the Monorack using the 351KIT
351KIT Specific kit to install the PL360, PLX360, TE351 without the Monorack
BF05 Specific metal flange for fitting the TankLock tank bags
* YOU CAN FIND SPOILERS PRICES ON PAGE 48
XJ 600 DIVERSION (91 > 95)
325F Specific Monorack arms only match the plates M3, MM
XJ 600 DIVERSION (96 > 03)
325F Specific Monorack arms only match the plates M3, MM
D116S Specific screen, smoked 46 x 33,5 cm (H x W)
XJ 600 DIVERSION N (96 > 99)
325F Specific Monorack arms only match the plates M3, MM
XJ6 / XJ6 DIVERSION / XJ6 DIVERSION F 600 (09 > 11)
364FZ Specific Monorack arms only match the plates M5, M5M, M6M
PLXR364 Rapid release tubular side-case holder for MONOKEY® SIDE cases you can mount only V35 MONOKEY® SIDECASES
A286 Specific screen, smoked 28 x 30 cm (H x W) including fixing kit / only for XJ6
A286NO Specific screen, black 28 x 30 cm (H x W) including fixing kit / only for XJ6
D444S Specific screen, smoked 42.5 x 38 cm (H x W) 10 cm higher than original / only for XJ6 Diversion
D449S Specific screen, smoked, 50 x 38 cm (H x W) 19,5 cm higher than original / only for XJ6 Diversion F
TE275 Specific tubular holder for Easylock bags; it can be used also as holder for soft luggage
T275 � Tubular side holder for soft luggage
BF05 Specific metal flange for fitting the TankLock tank bags
Application Chart 2012.indb 138 13/03/12 10.16
YAMAHA
43Aplikační tabulky GIVI 2012
CODE DESCRIPTION NOTE
139THE ITALIAN SIGN OF MOTODESIGN
YAMA
HA
XT 600 E (95 > 02)
333F Specific Monorack arms only match the plates M3, MM
MT 03 600 (06 > 11)
356FZ Specific Monorack arms only match the plates M5, M5M, M6M / maximum load allowed 6 Kg / with integrated passenger grabrails
A281A * Specific fitting kit for 245A, 245N, 246_ _ _
TN356 � Specific engine guard we recommend fitting by a qualified mechanic
T129 Tubular side holder for soft luggage
BF05 Specific metal flange for fitting the TankLock tank bags
* YOU CAN FIND SPOILERS PRICES ON PAGE 48
YZF 600 THUNDER CAT (96 > 02)
338F Specific Monorack arms only match the plates M3, MM
YZF 600 R6 (06 > 07)
BF05 Specific metal flange for fitting the TankLock tank bags
XVS 650 DRAG STAR (97 > 02)
A35N Universal screen, 54,9 x 46,8 cm (H x W) high and shaded bottom version
A23 Universal screen, 38,8 x 41 cm (H x W) low, transparent version
AS100A2 Specific fitting kit for A23 and A35N
XVS 650A DRAG STAR CLASSIC (98 > 07)
A39 Universal screen, transparent 51,7 x 57,3 cm (H x W)
AS102A2 Specific fitting kit for A39
TS818 � Backrest with detachable small luggage carrier
XT 660 R / XT 660 X (04 > 06)
SR353M Special rack for MONOLOCK® boxes MONOLOCK® plate M5M in nylon included
PL353 � Tubular pannier holder for MONOKEY® boxes
D433S Specific screen, smoked 37 x 36,5 cm (H x W)
XT 660 R / XT 660 X (07 > 11)
SR365M Special rack for MONOLOCK® boxes MONOLOCK® plate M5M in nylon included / maximum load allowed 3 kg
PL362 � Tubular pannier holder for MONOKEY® boxes
D433S Specific screen, smoked 37 x 36,5 cm (H x W) only for XT 660 R version
TN359 � Specific engine guard we recommend fitting by a qualified mechanic
XT 660Z TENERÉ (08 > 11)
E333 Specific rear plate for MONOKEY® case MONOKEY® plate M5 in nylon included
E333M Specific rear plate for MONOLOCK® case MONOLOCK® plate M5M in nylon included
PLXR363 Rapid release tubular side-case holder for MONOKEY® SIDE cases you can mount only V35 MONOKEY® SIDECASES
PL363 Tubular pannier holder for MONOKEY® boxes
D443ST Specific screen, transparent 40 x 42 cm (H x W) 10 cm higher than the original
TN348 Specific engine guard we recommend fitting by a qualified mechanic
BF05 Specific metal flange for fitting the TankLock tank bags
XTZ 750 SUPER TENERÉ (89 > 99)
316F � Specific Monorack arms only match the plates M3, MM
D98S Specific screen, smoked 35,4 x 28,6 cm (H x W) compatible from ’91 to ’94
Application Chart 2012.indb 139 13/03/12 10.16
YAMA
HAYA
MAHA
44Aplikační tabulky GIVI 2012
CODE DESCRIPTION NOTE
140 THE ITALIAN SIGN OF MOTODESIGN� = Item available until it runs out of stock
YAMAHA
XV 750 VIRAGO (89 > 98)
A35N Universal screen, transparent 54,9 x 46,8 cm (H x W) compatible from ’92 to ’98 / high and shaded bottom version
A23 Universal screen, transparent 38,8 x 41 cm (H x W) compatible from ’92 to ’98 / low, transparent version
AS99A2 � Specific fitting kit for A23 and A35N
FZ8 / FAZER 8 800 (10 > 11)
366FZ Specific Monorack arms only match the plates M5, M5M, M6M / maximum load allowed 6 Kg
SR2100 Special rack for MONOKEY® boxes maximum load allowed 5 kg / MONOKEY® plate M5 in nylon included / It can only be mounted to the original alluminium rack, which is available as an optional extra from the manufacturer company
PLXR366 Rapid release tubular side-case holder for MONOKEY® SIDE cases you can mount only V35 MONOKEY® SIDECASES / can be mounted without the Monorack using the 366KIT
366KIT Specific kit to install the PLXR366 and TE366 without the Monorack
A287 Specific screen, smoked 28 x 30 cm (H x W) including fixing kit / not for faired version
A287N Specific screen, black 28 x 30 cm (H x W) including fixing kit / not for faired version
D448S Specific screen, smoked 55,5 x 55,5 cm (H x W) 19 cm higher than original
TN352 Specific engine guard we recommend fitting by a qualified mechanic
TE366 Specific tubular holder for Easylock bags; it can be used also as holder for soft luggage can be mounted without the 366FZ Monorack using the 366KIT
BF05 Specific metal flange for fitting the TankLock tank bags
TDM 850 (96 > 01)
336F Specific Monorack arms only match the plates M3, MM
PLA336 Tubular side-case holder (black) in order to fix the top-case you have to combine with PA01
D116S Specific screen, smoked 46 x 33,5 cm (H x W)
TDM 900 (02 > 11)
347F Specific Monorack arms only match the plates M3, MM / maximum load allowed 6 Kg
SR347 Special rack maximum load allowed 5 kg
PL347 Tubular pannier holder for MONOKEY® boxes maximum load allowed 3 kg / the indicators must be moved from original position
PLX347 Tubular pannier holder for V35 MONOKEY® SIDE cases you can mount only V35 MONOKEY® SIDE CASES
D132S Specific screen, smoked 41 x 32,5 cm (H x W) only with spoiler
TN347 Specific engine guard we recommend fitting by a qualified mechanic
BF05 Specific metal flange for fitting the TankLock tank bags
* IN ORDER TO FIT THE MONOLOCK® BOXES USE THE PLATE INCLUDED; TO FIT THE MONOKEY® CASES USE THE E250 PLATE (WHICH IS SOLD SEPARATELY)
XJ 900 DIVERSION (94 > 05)
331F Specific Monorack arms only match the plates M3, MM
Y215 Specific wingrack fitting kit only with chassis N140
XVS 950 A MIDNIGHT STAR (09 > 11)
TS825 Backrest with detachable small luggage carrier
A47 Specific screen, transparent 56 x 57 cm (H x W)
AS103A2 Specific fitting kit for A46, A47
T276 Tubular side holder for soft luggage
FZS 1000 FAZER (01 > 02)
348FZ Specific Monorack arms only match the plates M5, M5M, M6M
D129S Specific screen, smoked 43 x 33 cm (H x W)
FZS 1000 FAZER (03 > 05)
348FZ Specific Monorack arms only match the plates M5, M5M, M6M
PL349 Tubular pannier holder for MONOKEY® boxes you can only mount MONOKEY® E21 CRUISER cases / is mounted in conjuction with Monorack
Application Chart 2012.indb 140 13/03/12 10.16
YAMAHA
45Aplikační tabulky GIVI 2012
CODE DESCRIPTION NOTE
141THE ITALIAN SIGN OF MOTODESIGN
YAMA
HA
D129S Specific screen, smoked 43 x 33 cm (H x W)
FZ1 FAZER 1000 (06 > 11)
359FZ Specific Monorack arms we recommend mounting smaller cases MONOLOCK® in conjunction with M5M or M6M plate / It requires fitment of cases up to 37 ltr / maximum load allowed 6 kg
PLX359 Tubular pannier holder for V35 MONOKEY® SIDE cases you can mount only V35 MONOKEY® SIDE CASES / you must move the indicators from their original position / can be mounted without the Monorack using the PLX359KIT
PLXR359 Rapid release tubular side-case holder for MONOKEY® SIDE cases you must move the indicators from their original position / you can mount only V35 MONOKEY® SIDE V35 / can be mounted without the Monorack using the PLX359KIT
PLX359KIT Specific kit to install the PLX and the PLXR without the Monorack
D437S Specific screen, smoked 52 x 44 cm (H x W) 14 cm higher than the original
TN357 Specific engine guard we recommend fitting by a qualified mechanic
BF05 Specific metal flange for fitting the TankLock tank bags
FZ1 1000 (06 > 11)
365FZ Specific Monorack arms we recommend mounting smaller cases MONOLOCK® in conjunction with M5M or M6M plate / It requires fitment of cases up to 35 ltr / maximum load allowed 6 kg
PLX359 Tubular pannier holder for V35 MONOKEY® SIDE cases you can mount only V35 MONOKEY® SIDECASES / you must move the indicators from their original position / can be mounted without the Monorack using the 365KIT
PLXR359 Tubular pannier holder for V35 MONOKEY® SIDE cases you must move the indicators from their original position / you can mount only V35 MONOKEY® SIDECASES® SIDE V35 / can be mounted without the Monorack using the 365KIT
365KIT Specific kit to install the PLX and the PLXR without the Monorack
TN357 Specific engine guard we recommend fitting by a qualified mechanic
T271 Tubular side holder for soft luggage can be mounted without Monorack
BF05 Specific metal flange for fitting the TankLock tank bags
YZF R1 1000 (09)
BF05 Specific metal flange for fitting the TankLock tank bags
BT 1100 BULLDOG (02 > 09)
350FZ Specific Monorack arms only match the plates M5, M5M, M6M
XV 1100 VIRAGO (89 > 99)
A23 Universal screen, 38,8 x 41 cm (H x W) low, transparent version
A35N Universal screen, 54,9 x 46,8 cm (H x W) high and shaded bottom version
AS99A2 � Specific fitting kit for A23 and A35N
XVS 1100 DRAG STAR (99 > 02)
A23 Universal screen, 38,8 x 41 cm (H x W) low, transparent version
A35N Universal screen, 54,9 x 46,8 cm (H x W) high and shaded bottom version
AS100A2 Specific fitting kit for A23 and A35N
XVS 1100 DRAG STAR CLASSIC (00 > 02)
A39 Universal screen, transparent 51,7 x 57,3 cm (H x W)
AS102A2 Specific fitting kit for A39
FJ 1100
297F Specific Monorack arms only match the plates M3, MM
FJ 1200 (87 > 99)
297F Specific Monorack arms only match the plates M3, MM
XJR 1200 (95 > 98)
341F Specific Monorack arms only match the plates M3, MM
Application Chart 2012.indb 141 13/03/12 10.16
46Aplikační tabulky GIVI 2012
CODE DESCRIPTION NOTE
142 � = Item available until it runs out of stock
YAMAHA
V-MAX 1200
A123 Specific screen, smoked 31 x 29,5 cm (H x W)
XT 1200Z SUPER TENERÉ (10 > 11)
SR371 Special rack for MONOKEY® boxes MONOKEY® plate M5 in nylon included / is compatible with the original side case holder / to open the original side -cases you ought to remove the back top case from the plate
SRA2101 Special rack in aluminium for Monokey® cases it can be fit with the original side-case / to open the original side -cases you ought to remove the back top case from the plate / maximum load allowed 6 kg / It does not allow the assembly of the stop light kit or the remote control device on the case
PLR367 Rapid release tubular side-case holder for MONOKEY® cases
PL367 Tubular pannier holder for MONOKEY® boxes
D447ST Specific screen, transparent 57 x 44 cm (H x W) 13 cm higher than the original
AF447 Specific sliding wind-screen, transparent, complete with fitting kit. Maximum height 61 cm (12 cm of extension), width 43 cm
TN355 Specific engine guard we recommend fitting by a qualified mechanic
BF05 Specific metal flange for fitting the TankLock tank bags
FJR 1300 (01 > 05)
SR346 Special rack for MONOKEY® boxes is compatible with the original side case holder / MONOKEY® plate M5 in nylon included
D134ST Specific screen, transparent 47 x 51 cm (H x W) 5 cm higher than the original
FJR 1300 (06 > 11)
E228 Specific rear plate for MONOKEY® case Maximum load 6 Kg. / Complete with M5 Monokey plate
E228M Specific rear plate for MONOLOCK® case Maximum load 6 Kg. / Complete with M5M Monolock plate
SR357 Special rack for MONOKEY® boxes
PLX357 � Tubular pannier holder for V35 MONOKEY® SIDE cases you can mount only V35 MONOKEY® SIDE CASES / to be mounted only the specific side-case
D436ST Specific screen, transparent 52 x 49,5 cm (H x W) 5 cm higher that the original
BF05 Specific metal flange for fitting the TankLock tank bags
XJR 1300 (98 > 02)
341F Specific Monorack arms only match the plates M3, MM
XJR 1300 (04 > 06)
355F Specific Monorack arms only match the plates M3, MM
XJR 1300 (07 > 11)
361F Specific Monorack arms only match the plates M3, MM
BF05 Specific metal flange for fitting the TankLock tank bags
XVS 1300 MIDNIGHT STAR (07 > 11)
A46 Specific screen, transparent 56 x 57 cm (H x W)
AS103A2 Specific fitting kit for A46, A47
TS824 � Backrest with detachable small luggage carrier
Application Chart 2012.indb 142 13/03/12 10.16
47Aplikační tabulky GIVI 2012