Download - ASSEMBLY TIPS
INCLUDED PARTS
12 28COUNT
1COUNT
26COUNT
BLOCK G BOTTLE OPENER 1˝ BOLT (BLUE)
2COUNT
LEGS 2COUNT
ARMS 2COUNT
SEAT SIDE
Back AssemblyLeft Rocker Leg Assembly Right Rocker Leg Assembly
Left Seat Side Right Seat Side
Face Plate Seat Brace
Right Arm Left Arm
Back Seat Slat Middle Seat Slat Front Seat Slat
G Block (X12)1" Bolt Blue (X26)
Botle Opener
Back AssemblyLeft Rocker Leg Assembly Right Rocker Leg Assembly
Left Seat Side Right Seat Side
Face Plate Seat Brace
Right Arm Left Arm
Back Seat Slat Middle Seat Slat Front Seat Slat
G Block (X12)1" Bolt Blue (X26)
Botle Opener
Back AssemblyLeft Rocker Leg Assembly Right Rocker Leg Assembly
Left Seat Side Right Seat Side
Face Plate Seat Brace
Right Arm Left Arm
Back Seat Slat Middle Seat Slat Front Seat Slat
G Block (X12)1" Bolt Blue (X26)
Botle Opener
Back AssemblyLeft Rocker Leg Assembly Right Rocker Leg Assembly
Left Seat Side Right Seat Side
Face Plate Seat Brace
Right Arm Left Arm
Back Seat Slat Middle Seat Slat Front Seat Slat
G Block (X12)1" Bolt Blue (X26)
Botle Opener
RIGHT
LEFT
RIGHTRIGHT
LEFT
LEFT
28
1COUNT
SEAT BRACE
3COUNT
SEAT SLATS 1COUNT
BACK 1COUNT
FACE PLATE
/// ASSEMBLY TIPS //////////////////////////////////////////////////To avoid damaging furniture perform the assembly of your Loll furniture on a clean soft surface like a blanket, carpet, or the fl attened cardboard box the furniture was shipped in. Components should not be unnecessarily forced together! Plastic is fl exible and you may need to persuade the pieces to align them properly. If it seems something isn’t fi tting together you likely have it wrong and you should reread the instructions to ensure you are aligning the proper components. You can also contact your Loll Sales Associate or Customer Service for support at 877.740.3387.
* Don’t Use a Cordless Screw Gun: It is not necessary and we do not recommend using a screw gun or drill to install and tighten bolts in inserts. Finger tighten all bolts fi rst and then use the Allen Tool provided to fi nish tightening all bolts after the piece is assembled.** Please Recycle the BOX and paper packaging.
/// PRODUCT CARE ///////////////////////////////////////////////////// Your new Loll furniture is a no maintenance product. It is fade resistant and you’ll never need to paint or stain it and it can be left outside all year regardless of the season. It will not rot, even if left standing in water; it’s plastic. Nonetheless, we’re pretty sure your Loll furniture will get a lot of use and will at some point need cleaning. We recommend a garden hose and incorporating a soft bristle brush. Adding a tablespoon or two of your favorite eco- friendly soap to the wash will get everything squeaky clean! Mineral deposits left over from hard water can be removed with a solution of vinegar and water.
5 YR WARRANTYLoll Designs strives to build long-term relationships based on confi dence and trust with our customers. We sit beside, on top, and beneath the quality of our fi ne furniture and will make things right if you are not completely satisfi ed with your purchase. Loll Designs hereby guarantees that the piece will be of good quality and workmanship, free from faults and defects. Loll warrants that all components will not fade or fail, under normal use, for fi ve years from the year mark on the piece or the date of purchase.*For commercial orders the warranty is three years.
DAMAGED PRODUCTSometimes accidents occur. Please inspect your Loll furniture when you receive it to make sure that it has not been damaged during shipping. If damage has occurred please take digital pictures of the damaged furniture and the box it was shipped in, and email them to [email protected] or call Sharon using our toll free number: 877.740.3387, ext. 123. The damage will be assessed and you will be contacted with a solution to the problem. It may be helpful to save all of your packaging material in case a return is necessary.
Loll Designs1325 North 59th Avenue West | Duluth, Minnesota 55807lolldesigns.com | 877.740.3387
THE LOLL STORYLoll’s history begins with the 1997 inception of TrueRide, a design and build contractor special-izing in custom municipal skateboarding parks. TrueRide’s founders started with a commitment to environmental responsibility, and they found ways to repurpose leftover skate park material as Epicurean Cutting Surfaces (www.epicureancs.com) and Loll Designs outdoor furniture (www.lolldesigns.com). After more than four years of perfecting design and construction Loll unveiled its fi rst piece in November 2006, a modern version of the classic Adirondack chair. Since then, Loll has developed a full range of chairs, benches, and tables constructed with 100-percent recycled materials. Loll Designs’ furniture is built with high-density polyethylene, a material used in many consumer products (more than 60 million tons is produced worldwide every year). Loll chooses to use a recycled HDPE sourced primarily from recycled milk jugs. All Loll pieces are designed to be modern, clean, and comfortable. Because they’re not wood or metal, they withstand the elements with zero maintenance. Outdoor furniture should be for lolling around; not scraping, painting, or being moved inside for storage.
PRODUCT FEATURES-Recycled PlasticThe plastic used in Loll Designs furniture is reclaimed from post-consumer and post-industrial high density polyethylene (#2 plastic). Milk jugs are the primary source of this material.-WeatherproofLeave Loll outdoors year round. Loll furniture is built to last and will not rot, decay, splinter or fade. Loll is held together with stainless steel fasteners and zinc coated inserts.-Replaceable PartsIf a part is damaged on your Loll chair it is possible to replace that specifi c piece. This reduces shipping costs and waste replacing your product. Plus the damaged piece can be recycled.-Maintenance FreeLoll Designs furniture never needs to be painted or stained. No seasonal storage required. -Made in the USAOur manufacturing facility is located in Duluth, Minnesota. -Low Impact ManufacturingLoll furniture is fabricated in a facility designed to reduce its impact on the local environment. Some of Loll’s steps to reduce our manufacturing footprint include; Facility is a remediated indus-trial brownfi eld site; passive solar heated offi ce space and naturally lit interiors; extensive industrial and offi ce recycling programs; and the support of alternative energy.
ASSEMBLY TIPS*Please read before beginning assembly!To avoid damaging furniture perform the assembly of your Loll furniture on a clean soft surface like a blanket, carpet, or the fl attened cardboard box the furniture was shipped in. Components should not be unnecessarily forced together! Plastic is fl exible and you may need to persuade the pieces to align them properly. If it seems something isn’t fi tting together you likely have it wrong and you should reread the instructions to ensure you are aligning the proper components. You can also contact your Loll Sales Associate or Customer Service for support at 877.740.3387.
Don’t Use a Cordless Screw Gun: It is not necessary and we do not recommend using a screw gun or drill to install and tighten bolts in inserts. Finger tighten all bolts fi rst and then use the Allen Tool provided to fi nish tightening all bolts after the piece is assembled.
** Please recycle the BOX and paper packaging.
PRODUCT CAREYour new Loll furniture is a no maintenance product. It is fade resistant and you’ll never need to paint or stain it and it can be left outside all year regardless of the season. It will not rot, even if left standing in water; it’s plastic. Nonetheless, we’re pretty sure your Loll furniture will get a lot of use and will at some point need cleaning. We recommend a garden hose and incorporating a soft bristle brush. Adding a tablespoon or two of your favorite eco-friendly soap to the wash will get everything squeaky clean! Mineral deposits left over from hard water can be removed with a solution of vinegar and water.
DAMAGED PRODUCTSometimes accidents occur. Please inspect your Loll furniture when you receive it to make sure that it has not been damaged during shipping. If damage has occurred please take digital pictures of the damaged furniture and the box it was shipped in, and email them to [email protected] or call using our toll free number: 877.740.3387, ext. 1. The damage will be assessed and you will be contacted with a solution to the problem. It may be helpful to save all of your packaging material in case a return is necessary.
ASSEMBLY INSTRUCTIONS & PRODUCT INFO:
ASSEMBLY INSTRUCTIONS & PRODUCT INFO
by:
EMMET ROCKER
Back AssemblyLeft Rocker Leg AssemblyRight Rocker Leg Assembly
Left Seat SideRight Seat Side
Face PlateSeat Brace
Right ArmLeft Arm
Back Seat SlatMiddle Seat SlatFront Seat Slat
G Block (X12)1" Bolt Blue (X26)
Botle Opener
Back AssemblyLeft Rocker Leg Assembly Right Rocker Leg Assembly
Left Seat Side Right Seat Side
Face Plate Seat Brace
Right Arm Left Arm
Back Seat Slat Middle Seat Slat Front Seat Slat
G Block (X12)1" Bolt Blue (X26)
Botle Opener
Back AssemblyLeft Rocker Leg Assembly Right Rocker Leg Assembly
Left Seat Side Right Seat Side
Face Plate Seat Brace
Right Arm Left Arm
Back Seat Slat Middle Seat Slat Front Seat Slat
G Block (X12)1" Bolt Blue (X26)
Botle Opener
Back AssemblyLeft Rocker Leg Assembly Right Rocker Leg Assembly
Left Seat Side Right Seat Side
Face Plate Seat Brace
Right Arm Left Arm
Back Seat Slat Middle Seat Slat Front Seat Slat
G Block (X12)1" Bolt Blue (X26)
Botle Opener
Back AssemblyLeft Rocker Leg Assembly Right Rocker Leg Assembly
Left Seat Side Right Seat Side
Face Plate Seat Brace
Right Arm Left Arm
Back Seat Slat Middle Seat Slat Front Seat Slat
G Block (X12)1" Bolt Blue (X26)
Botle Opener
Back AssemblyLeft Rocker Leg Assembly Right Rocker Leg Assembly
Left Seat Side Right Seat Side
Face Plate Seat Brace
Right Arm Left Arm
Back Seat Slat Middle Seat Slat Front Seat Slat
G Block (X12)1" Bolt Blue (X26)
Botle Opener
Back AssemblyLeft Rocker Leg Assembly Right Rocker Leg Assembly
Left Seat Side Right Seat Side
Face Plate Seat Brace
Right Arm Left Arm
Back Seat Slat Middle Seat Slat Front Seat Slat
G Block (X12)1" Bolt Blue (X26)
Botle Opener
Back AssemblyLeft Rocker Leg Assembly Right Rocker Leg Assembly
Left Seat Side Right Seat Side
Face Plate Seat Brace
Right Arm Left Arm
Back Seat Slat Middle Seat Slat Front Seat Slat
G Block (X12)1" Bolt Blue (X26)
Botle Opener
FRONTMIDDLE BACK
ASSEMBLY INSTRUCTIONS
ATTACH BASE SIDES AND SEAT BRACE
ATTACH FRONT SEAT SLAT
ATTACH LEGS
ATTACH FACE PLATE
ATTACH SEAT SLATS
ATTACH ARMS
1
3
5
2
4
6
*Please read Assembly Tips before beginning assembly.Fit the pocket cut outs in the Seat Sides with the Backs lower support edges. Place Blocks G into the Backs lower support pocket cut outs, insert bolts through the blocks into the Seat Sides threaded holes, and finger tighten. Fit Seat Brace in the middle groove track cut out of the Back’s lower support. Place Block G into the Seat Brace’s cutout. Insert a Bolt through the block into lower support and finger tighten.
Fit groove track cut outs of the front Seat Slat with assembled Seat Sides and Face Plate edges. Place Blocks G in Base Side’s, insert bolts, and finger tighten.
A. Align holes and cut out of the Left Leg with the Base Side’s holes and Face Plate End. Insert bolts through the Base Side into the Left Leg and finger tighten.B. Repeat A. for opposite side Leg.
Align Face Plate cutouts with ends of corresponding Base Sides and Seat Support. Place Block G’s into Base Side and Seat Support cutouts. Insert Bolts through the blocks into the threaded holes of the Face Plate and finger tighten.
Fit groove track cut outs of the Back and Middle Seat Slat with assembled Seat Sides edges. Place Blocks G in Base Side’s, insert bolts, and finger tighten.
Place Bottle Opener (protective film side out) into the Right Arm’s cut out then re-move film, place the Arms on top of the Legs and middle support of the Back. Align Leg and support holes with corresponding Arm holes. Insert bolts into the Arms and finger tighten.*Using provided wrench securely tighten all bolts.
* It is very important that you finger tighten all bolts into inserts to ensure that you do not cross-thread bolts and inserts before tightening. It will also be easier if you wait to tighten bolts until you have all bolts installed and the piece completely assembled. This will allow for more movement of individual pieces and help in aligning holes with inserts. Use the Allen Tool provided to finish tighten bolt until snug.
Step 1Step 2 Step 3
Step 4
Step 5 and repeat Step 6 right arm gets bottle opener
Step 1Step 2 Step 3
Step 4
Step 5 and repeat Step 6 right arm gets bottle openerStep 1
Step 2 Step 3
Step 4
Step 5 and repeat Step 6 right arm gets bottle opener
Step 1Step 2 Step 3
Step 4
Step 5 and repeat Step 6 right arm gets bottle opener
Step 1Step 2 Step 3
Step 4
Step 5 and repeat Step 6 right arm gets bottle opener
Step 1Step 2 Step 3
Step 4
Step 5 and repeat Step 6 right arm gets bottle opener
Step 1Step 2 Step 3
Step 4
Step 5 and repeat Step 6 right arm gets bottle opener