division of EDM Zap1108 Front Street - Lisle IL 60532 USA Phone: 1-630-922-5005 Fax: 1-630-852-3678info@modularhose.com www.modularhose.comdedicated AT site: www.assistive.solutions

Legal Mumbo Jumbo: Apple, iPad, Microsoft, Surface, Android, Velco, Loc-Line, and other brands we may have ‘accidentally’

mentioned we don’t own and are the fancy trademarks of someone else. Information contained could change and is

accurate as of a long time ago...in a galaxy, far, far, away...which is possibly another trademark violation.

Information subject to change at any time. v18092

ModularHose.com

Assistive Technology

Three inch disc holds a variety of switches, devices, and other items.

Two arm configuration ideal for evaluating two switch set-ups.

With supplied re-usable cable ties, easily connect to almost any chair.

The plastic ball and socket can be made longer or shorter to match your needs.

Flexible arm for putting the switch in the exact location you need and

easily adjustable if individual moves. In addition, if user hits

mounting arm too hard it will move and not

cause injury.

Tips for Mounting to a Wheelchair:Make sure you have a long enough length of modular hose to be able to mount. The ModularHose AT Kits come in different lengths, if you need more length it is easy to add more with the segment packs. If using cable ties, attaching the modular hose both vertically and horizontally every few inches will prevent swiveling. Make sure that you are not blocking any moveable parts of the chair. The ModularHose.com round tube clamp or spring clamps provide additional mounting options.

How Much Weight Can it Hold?The two variables that effect it the most are the length of the arm and the angle. Traditionally, the shorter the arm and the more vertical - the more weight it can hold. For example, a short 6” arm holding something vertically can likely hold several pounds but once you bend it towards horizontal, gravity takes over and the arm will not be able to hold it in position. For many applications we use a two arm system for tablets such as the iPad (1 to 1.5 lbs) because the arm can hold it up in almost any position. You can use a single arm for tablets but the length should be shortened and kept vertical. The arms are not recommended for devices over 2 lbs.

Double Arm with Mounting PlateIdeal for tablets, light-weight communication devices, multiple switches, as a platform, and more. The double arm system allows the Modular Hose to hold more weight. Works best for devices about 1.5 pounds or less. Does not include tablet case - use your own or attach the supplied dual lock directly to device.• 3 feet Adjustable Arm with Y Fitting• 4”x6” Mounting Plate• 2 Spring Clamps• 2 3M Dual Lock pieces• Pre-assembledDouble Arm with Mounting Plate: 113161

1 foot kit pictured

Clamp Arm w/Mounting PlateGreat for lightweight communication devices, multiple switches, platform and more. Kit includes pieces of Dual Lock for quick and easy attachment.• 1 or 2 Feet Adjustable Arm• 4”x6” Mounting Plate• Spring Clamp• 2 3M Dual Lock pieces• Pre-assembledClamp w/Plate, 1 ft: 110321Clamp w/Plate, 2 ft: 110341

Double Spring ClampShort and sweet - a couple of clamps for holding. Use for holding up items like pictures and learning boards or lightweight devices.• 1 or 2 Feet Adjustable Arm• 2 Spring Clamps• Pre-assembledTwo Clamp, 1ft: 110121Two Clamp, 2ft: 110141

Starter KitThis starter kit comes with common parts used in the AT field giving you the flexibility and options to create hundreds of different configurations immediately. Create a few ModularHose AT Kits or customize to your own needs.

• 12 Feet of Modular Hose/Arm• 4 - 3” Mounting Disc• 2 - 4”x6” Mounting Plate• 4 Spring Clamp• 1 Dual Use Clamp for Flat Surface or Round Tube• 4 Double Socket • 2 Y Fitting• 100 Reusable Cable Ties• 8 Velcro® Hook and Loop Coin• 6 3M Dual Lock® Strips• 1 Assembly Tool

ModularHose Starter Kit: 100001

2 foot kit pictured

The Starter Kits are chock full of AWESOMENESS!!! You can make several kits in this brochure and still have parts leftover.

Be Creative...this kit allows you to attach different items or devices to the plate. Depending on the configuration it can hold about 1.5 to 2 lbs.

Super Kit (updated)The super kit offers you goodies galore! Virtually all the parts used in the AT Field including weighted bases and a tablet holder, giving you the flexibility and option to create hundreds of different configurations immediately. Create a few standard ModularHose.com AT Kits or customize to your own needs.

ModularHose.com

* Super Kit features 122% of your daily modularabilitiness - that’s right, an extra 22%

ModularHose.com

How to Order?We accept Visa, Master Card, and American Express by either phone or online at ModularHose.com.Purchase orders are accepted from school districts, other educational institutions, assistive technology centers, and Fortune 1000 companies. Other organizations may also qualify for terms when credit information is supplied and approved.order online: www.modularhose.com email orders: sales@modularhose.com phone: 1-630-922-5005 fax order: 1-630-852-3678

ModularHose Super Kit: 100006

• 16 Feet of Modular Hose/Arm• 4 - 3” Mounting Disc• 2 - 4”x6” Mounting Plate• 6 Spring Clamp• 1 Dual Use Clamp• Mini Clamp• 10 Double Socket• 2 Y Fitting• 100 Reusable Cable Ties

• 5 Velcro® Hook and Loop Coin• 4 3M Dual Lock® Strips• 1 Assembly Tool• 1 Large Weighted Base• 1 Platform/Podium• 1 Tablet Holder• 1 Set of Tablet Deep V-Tabs• Silicone Phone Holder• Adjustable Phone Clamp

Giraffe Hands Free Drinking BottleThe Giraffe™ Bottle Hands Free Drinking Bottle allows users with various abilities to stay hydrated. The system is designed to be flexible and easy to use.• Clear 750ml/25oz Tritan Bottle (BPA free plastic)• Threaded Lid with Seal• Neck available in various lengths• Drinking Tube• Check Valve• Tube Cleaning Brush• Modular Design for easy part replacement• Markings in ml/oz on Bottle 9” Neck Giraffe Bottle: 504911, with clamp on aluminium bottle holder 50492115” Neck Giraffe Bottle: 504912, with clamp on aluminium bottle holder 50492220” Neck Giraffe Bottle: 504913, with clamp on aluminium bottle holder 50492325” Neck Giraffe Bottle: 504914, with clamp on aluminium bottle holder 50492430” Neck Giraffe Bottle: 504915, with clamp on aluminium bottle holder 50492536” Neck Giraffe Bottle: 504916, with clamp on aluminium bottle holder 504926

Extra / Replacement Bottle: 504111(other parts are available online)

Phone Holder w/Spring ClampA simple solution to hold you phone, music device, or other small device and position it where you need it. For devices 2.25” to 4” wide.• 1 or 2 Feet of Adjustable Arm• Adjustable Small Device Holder• Spring Clamp• Pre-assembledClamp w/Holder, 1ft: 110621Clamp w/Holder, 2ft: 110641

1 foot kit picturedI’m feeling 22CoverOur tablet holder with a Y fitting that allows a side arm holding a phone. Pretty Sweet!

Modular Arm / Hose SystemThe 3/4”ID System (1.25”OD) is the most common system in the Assistive Technology field. Add hose to make the length longer. Hose segments can be separated at each bead.1 Foot Segment Pack: 61501

Comes as two 6” segments - snap them together to make a foot - or separate the beads for different configurations

25 Foot Segment Box: 69540 Comes as fifty-nine 6” segments50 Foot Coil: 69541 Comes as a continuous coil

Assembly ToolThe tool is designed for assembly and makes putting it together quicker - but not required. 3/4”ID Assembly Tool: 78004

Silicone Phone StrapWorks with the 3” mounting disc and stretches around phone. Also works with the adjustable phone clip for extra hold. Disc/Hose not included.Phone Strap: 501111

Adjustable Phone ClipScales and adjusts to most phones & cases. Hose not included.Adjustable Phone Clip: 501123

Adjustable Cup HolderTabs adjust to difference size cups and features a secure built in tray. Folds flat when not in use.Adjustable Cup Holder: 500301

Aluminium Bottle HolderSturdy aluminium holder that can be slightly bent to accommodate different size bottles. Available with adjustable clamp that rotates or with modular hose mounting bead.Bottle Holder with Modular Hose: 500312Bottle Holder with Clamp: 500311

Plate with StrapsUse this to attach the system to leg, arm, bed, chair, and more. 4”x6” plate with dual 24” quick release adjustable straps.Plate with Straps: 530041

Mounting DiscFlat surface allows for easy attaching of switches, small devices, and more. Attach items using optional velcro or similar. Optional silicone strap extends use for attaching phones and music players.Mounting Disc: 522301

Camera/Device Mounting DiscMounting disc with standard 1/4”-20 bolt. Allows for cameras and other devices to attach to the discMounting Disc: 522311

Mounting PlateThe mounting bead is attached to a 4” x 6” Plate and offers a larger surface to attach items with Velcro, Dual Lock, glue, or simply screw it right to the polycarbonate plate. Mounting Plate: 530001

Podium Style PlateA podium style 8.5” x 11” platform/tray with a 1.5” lip for holding items in place. Features 3 mounting beads on the back for attaching one, two, or even three arms. Great for a variety of applications.Podium Style Plate: 540001

Tablet HolderThe tablet holder is available separately and could integrate into your current setup. Works with tablets measuring diagonally up to 15”.Deep V-Tabs: 570002

Tablet Holder Deep V-TabsExtra deep v-tabs for universal tablet holder, ideal for tablets and devices that are in a case or skin up to .75”.Deep V-Tabs: 570009 (Pack of 2)

Compact Desktop BaseThis weighted base is ideal for flat surfaces including desks and trays. Add an arm and it is great for holding up small devices like mini tablets in a vertical position. Approximately 7” x 3.75”, .9 lbs.Small Desktop Base: 580001

Desktop BaseWeighted base works well with standard size tablets such as the iPad when combined with an arm and holder. Approximately 12” x 6”, 2.2 lbs.Large Desktop Base: 590001

Spring Clamp with BeadThis Spring Clamp opens to a 2” opening and has a modular hose starter piece already attached. Spring clamps make attaching to flat surfaces quick and easy.Spring Clamp with Mounting Bead: 510001

Round Tube ClampA compact solution for mounting modular hose to round tubes such as wheel chairs, bed frames, and more. Works with 1” or 7/8” tubing.• Round Tube Clamp with Knob• Modular Hose Connector• Modular Hose Double Socket• Grip LinerRound Tube Clamp Kit: 511001

Tube/Flat Surface MountThis clamp is ideal for mounting arms and more to round tubes and flat surfaces. Adjustable jaw opens up to 2.5” and closes with twist handle. Includes wedge for clamping onto flat surfaces. Tube/Flat Surface Mount: 512001

Mini ClampThis mini Clamp opens to up to a 1.5” opening and has a modular hose bead attached.Mini Clamp with Mounting Bead: 514113

Double Disc Mounting SolutionThis popular kit is great for double head switch situations and the 6ft kit gives you enough length to customize.• 3 or 6 feet Adjustable Arm• 2 - 3” Mounting Disc• 10 (3ft) or 20 (6ft) Reusable Cable

Ties• 2 Velcro® Hook and Loop Coin sets• Pre-assembledDouble Disc, 3ft: 120261Double Disc, 6ft: 120291

6 foot kit pictured

6 foot kit pictured

Single Disc Mounting SolutionGreat starter kit for switches and other items. Available in 3 foot or 6 foot versions.• 3 or 6 feet Adjustable Arm• 3” Mounting Disc• 10 (3ft kit) or 20 (6ft kit)

Reusable Cable Ties• Velcro® Hook and Loop Coin• Pre-assembledSingle Disc, 3 Feet: 120061Single Disc, 6 Feet: 120091

Mix and MatchRemember, the system is

designed to come apart and to be reassembled - in different configurations. You can take

apart a kit and make it something else. Individual

components are available to extend the use of the system. So if you have one or two kits, take them apart and make

something new.

Platform/Podium One ArmA podium style tray that is 8.5”x11” featuring a slightly longer arm for holding up all sorts of stuff. Tablets and devices with large cases, pictures, learning aids, workbooks, and much more.• 8” or 14” Adjustable Arm• Spring Clamp• 3 Installed Mounting Beads for Different Configurations• Pre-assembledPlatform/Podium 8”: 110411Platform/Podium 14”: 110421

Platform/Podium Two ArmThey say, two arms are better than one. This kit offers excellent support of heavier items such as a tablet or communication device. The two arm holder is also helpful for holding items across a lap on a wheelchair or desk.• Dual 18” Adjustable Arm• 2 Spring Clamps• 3 Installed Mounting Beads for Different Configurations• Pre-assembledPlatform/Podium Two Arm: 114161

Disc with Spring ClampA simple solution to place a switch (or whatever) where you want it. Includes Velcro for quick attachment.• 1 or 2 Feet of Adjustable Arm• 3” Mounting Disc• Spring Clamp• Velcro® Hook and Loop Coin• Pre-assembledSpring Clamp w/Disc, 1ft: 110221Spring Clamp w/Disc, 2ft: 110241

1 foot kit pictured

Platform/Podium DesktopA podium style tray that is 8.5”x11”

with a fancy-schmancy desktop base. Great for all sorts of applications including on the table or floor.

• 8” Adjustable Arm• Spring Clamp

• 3 Installed Mounting Beads for Different Configurations

• Pre-assembledPlatform/Podium Desktop: 190411

The podium part comes with 3 mounting beads on the back. You can use it with one, two or even three arms. Dare we say, maximum “mountability”.

Tablet Holder Two Arm Spring ClampThe two arm kit is great for wheelchairs and other locations where the tablet could be moved in multiple positions. The two arm holder works well with tablets weighing 1.5 to 2 lbs or less.• 2 Modular 18” Arms with integrated Y fitting to

create a bridge for maximum stability• Adjustable Tablet Holder• 2 Spring Clamps that open up to 2” for quick

and easy mounting on a variety of surfaces• Pre-assembledTablet Holder: 117161Tablet Holder w/Deep V-Tabs: 117162

Tablet Holder Arm W/Spring ClampQuickly and Easily clamp and position a tablet where you need it - a desk, tray, table. • Modular Arm• Adjustable Tablet Holder• Spring Clamp that opens up to 2” for quick and

easy mounting on a variety of surfaces• Pre-assembledTablet Holder 8”: 110711Tablet Holder 8” w/Deep V-Tabs: 110712(8” arm suitable for most tablets)Tablet Holder 14”: 110721Tablet Holder 14” w/Deep V-Tabs: 110722(14” arm suitable for mini tablets or standard tablets if the arm is in a vertical position)

Tablet Holder w/Desktop BaseA great solution for using your tablet at a desk, table, counter, floor, on a tray; almost any flat surface will do. Don’t keep staring down at your tablet - raise it up.• Modular Arm• Adjustable Tablet Holder• Desktop Base 12” x 6”• Pre-assembledDesktop Holder 8”: 190711Desktop Holder 8” w/Deep V-Tabs: 190712(8” arm suitable for standard tablets)Desktop Holder 14”: 190721Desktop Holder 14” w/Deep V-Tabs: 190722(14” arm suitable for mini tablets or standard tablets if the arm is in a vertical position)

Universal Tablet HolderAlready have some ModularHose.com pieces or need to update? The tablet holder is available separately and could integrate into your current setup. Tailored for swift installation. Works with tablets measuring diagonally up to 15”.Tablet Holder: 570002

8” kit pictured

8” kit pictured

Don’t see the kit with the configuration you need? No problem. You can order the individual components and make it the way you want.

Our adjustable tablet holder works great with the Apple

iPad, iPad Mini, Microsoft Surface including the

Surface 3 Pro, Samsung Galaxy, Amazon Kindle,

B&N Nook, and most tablets and e-readers from Sony,

Asus, Lenovo, Google, Acer, Toshiba, Dell, and

more! Designed for tablets measuring diagonally up to

15” (381mm). Order the optional Deep V-Tabs for tablets with skins/cases up to .75” deep. A great solution for holding your tablet on a desk, table,

tray, wheelchair, counter, bed, and more. Depending

on your application, we recommend two arm

configurations to hold up a device that weighs between 1-2 lbs. Single

arm designs are popular because of the minimal

space it takes up but keep the arm short

and vertical so that it

can safely hold your

device.

Adjus

table

some sweet angle

holding action

Deep V-TabsExtra deep v-tabs for tablet holder, ideal for tablets & devices that are in a case or skins up to .75”.Deep V Tabs: 570009 (pack of 2)

The longer length is ideal for wrapping the arm around the back of the wheelchair and attaching with cable ties every few inches.

Disc with Adjustable ClampHelpful solution for positioning and holding a head switch or lightweight item on a tray or platform. Includes Velcro for quick attachment.• 1 or 2 Feet of Adjustable Arm• 3” Mounting Disc• Adjustable Clamp for Tube/Flat

Surface• Velcro® Hook and Loop Coin• Pre-assembledAdj. Clamp w/Disc, 1ft: 160221Adj. Clamp w/Disc, 2ft: 160241

14” kit pictured

Tablet Holder W/Plate & StrapsAdjustable straps hold tablet in place for hands free operation. Ideal for leg, sofa arms, car seats, and more.• Modular Arm• Adjustable tablet holder• Plate with straps• Pre-assembledTablet Holder: 130701Tablet Holder w/Deep V-Tabs: 130702

ModularHose.com

1 foot kit pictured

Tablet kits listed as “w/Deep V-Tabs” come with both standard V-Tabs and Deep V-Tabs.

Flat Surface MountAttaches Modular Hose to a flat surface.Flat Mount: 60533 (Pack of 2)

Double SocketDouble female piece. Double Socket: 61514 (Pack of 4)

Y FittingAllows you to branch off the hose.Y Fitting: 61511 (Pack of 2)

Elbow90° piece for quick turns.Elbow Fitting: 61515 (Pack of 2)

Velcro™ CoinsVelcro coins with adhesive backing make it easy to attach switches and more to the disc.1 7/8” diameter Hook & Loop: 90705 (1 set)

3M Dual Lock™Comes with (2) 1” x 3” pieces with adhesive.3M Dual Lock: 90707 (1 set)

Reusable Cable Ties10.5” cable ties allow for quick and easy setup.Reusable Cable Ties: 90712 (Pack of 100)

Add our silicone phone strap to give the disc even more versatility.Phone Strap: 501111

Modular Arm / Hose SystemThe 3/4”ID System (1.25”OD) is the most common system in the Assistive Technology field. Add hose to make the length longer. Hose segments can be separated at each bead.1 Foot Segment Pack: 61501

Comes as two 6” segments - snap them together to make a foot - or separate the beads for different configurations

25 Foot Segment Box: 69540 Comes as fifty-nine 6” segments50 Foot Coil: 69541 Comes as a continuous coil

Assembly ToolThe tool is designed for assembly and makes putting it together quicker - but not required. 3/4”ID Assembly Tool: 78004

Silicone Phone StrapWorks with the 3” mounting disc and stretches around phone. Also works with the adjustable phone clip for extra hold. Disc/Hose not included.Phone Strap: 501111

Adjustable Phone ClipScales and adjusts to most phones & cases. Hose not included.Adjustable Phone Clip: 501123

Adjustable Cup HolderTabs adjust to difference size cups and features a secure built in tray. Folds flat when not in use.Adjustable Cup Holder: 500301

Aluminium Bottle HolderSturdy aluminium holder that can be slightly bent to accommodate different size bottles. Available with adjustable clamp that rotates or with modular hose mounting bead.Bottle Holder with Modular Hose: 500312Bottle Holder with Clamp: 500311

Plate with StrapsUse this to attach the system to leg, arm, bed, chair, and more. 4”x6” plate with dual 24” quick release adjustable straps.Plate with Straps: 530041

Mounting DiscFlat surface allows for easy attaching of switches, small devices, and more. Attach items using optional velcro or similar. Optional silicone strap extends use for attaching phones and music players.Mounting Disc: 522301

Camera/Device Mounting DiscMounting disc with standard 1/4”-20 bolt. Allows for cameras and other devices to attach to the discMounting Disc: 522311

Mounting PlateThe mounting bead is attached to a 4” x 6” Plate and offers a larger surface to attach items with Velcro, Dual Lock, glue, or simply screw it right to the polycarbonate plate. Mounting Plate: 530001

Podium Style PlateA podium style 8.5” x 11” platform/tray with a 1.5” lip for holding items in place. Features 3 mounting beads on the back for attaching one, two, or even three arms. Great for a variety of applications.Podium Style Plate: 540001

Tablet HolderThe tablet holder is available separately and could integrate into your current setup. Works with tablets measuring diagonally up to 15”.Deep V-Tabs: 570002

Tablet Holder Deep V-TabsExtra deep v-tabs for universal tablet holder, ideal for tablets and devices that are in a case or skin up to .75”.Deep V-Tabs: 570009 (Pack of 2)

Compact Desktop BaseThis weighted base is ideal for flat surfaces including desks and trays. Add an arm and it is great for holding up small devices like mini tablets in a vertical position. Approximately 7” x 3.75”, .9 lbs.Small Desktop Base: 580001

Desktop BaseWeighted base works well with standard size tablets such as the iPad when combined with an arm and holder. Approximately 12” x 6”, 2.2 lbs.Large Desktop Base: 590001

Spring Clamp with BeadThis Spring Clamp opens to a 2” opening and has a modular hose starter piece already attached. Spring clamps make attaching to flat surfaces quick and easy.Spring Clamp with Mounting Bead: 510001

Round Tube ClampA compact solution for mounting modular hose to round tubes such as wheel chairs, bed frames, and more. Works with 1” or 7/8” tubing.• Round Tube Clamp with Knob• Modular Hose Connector• Modular Hose Double Socket• Grip LinerRound Tube Clamp Kit: 511001

Tube/Flat Surface MountThis clamp is ideal for mounting arms and more to round tubes and flat surfaces. Adjustable jaw opens up to 2.5” and closes with twist handle. Includes wedge for clamping onto flat surfaces. Tube/Flat Surface Mount: 512001

Mini ClampThis mini Clamp opens to up to a 1.5” opening and has a modular hose bead attached.Mini Clamp with Mounting Bead: 514113

Double Disc Mounting SolutionThis popular kit is great for double head switch situations and the 6ft kit gives you enough length to customize.• 3 or 6 feet Adjustable Arm• 2 - 3” Mounting Disc• 10 (3ft) or 20 (6ft) Reusable Cable

Ties• 2 Velcro® Hook and Loop Coin sets• Pre-assembledDouble Disc, 3ft: 120261Double Disc, 6ft: 120291

6 foot kit pictured

6 foot kit pictured

Single Disc Mounting SolutionGreat starter kit for switches and other items. Available in 3 foot or 6 foot versions.• 3 or 6 feet Adjustable Arm• 3” Mounting Disc• 10 (3ft kit) or 20 (6ft kit)

Reusable Cable Ties• Velcro® Hook and Loop Coin• Pre-assembledSingle Disc, 3 Feet: 120061Single Disc, 6 Feet: 120091

Mix and MatchRemember, the system is

designed to come apart and to be reassembled - in different configurations. You can take

apart a kit and make it something else. Individual

components are available to extend the use of the system. So if you have one or two kits, take them apart and make

something new.

Platform/Podium One ArmA podium style tray that is 8.5”x11” featuring a slightly longer arm for holding up all sorts of stuff. Tablets and devices with large cases, pictures, learning aids, workbooks, and much more.• 8” or 14” Adjustable Arm• Spring Clamp• 3 Installed Mounting Beads for Different Configurations• Pre-assembledPlatform/Podium 8”: 110411Platform/Podium 14”: 110421

Platform/Podium Two ArmThey say, two arms are better than one. This kit offers excellent support of heavier items such as a tablet or communication device. The two arm holder is also helpful for holding items across a lap on a wheelchair or desk.• Dual 18” Adjustable Arm• 2 Spring Clamps• 3 Installed Mounting Beads for Different Configurations• Pre-assembledPlatform/Podium Two Arm: 114161

Disc with Spring ClampA simple solution to place a switch (or whatever) where you want it. Includes Velcro for quick attachment.• 1 or 2 Feet of Adjustable Arm• 3” Mounting Disc• Spring Clamp• Velcro® Hook and Loop Coin• Pre-assembledSpring Clamp w/Disc, 1ft: 110221Spring Clamp w/Disc, 2ft: 110241

1 foot kit pictured

Platform/Podium DesktopA podium style tray that is 8.5”x11”

with a fancy-schmancy desktop base. Great for all sorts of applications including on the table or floor.

• 8” Adjustable Arm• Spring Clamp

• 3 Installed Mounting Beads for Different Configurations

• Pre-assembledPlatform/Podium Desktop: 190411

The podium part comes with 3 mounting beads on the back. You can use it with one, two or even three arms. Dare we say, maximum “mountability”.

Tablet Holder Two Arm Spring ClampThe two arm kit is great for wheelchairs and other locations where the tablet could be moved in multiple positions. The two arm holder works well with tablets weighing 1.5 to 2 lbs or less.• 2 Modular 18” Arms with integrated Y fitting to

create a bridge for maximum stability• Adjustable Tablet Holder• 2 Spring Clamps that open up to 2” for quick

and easy mounting on a variety of surfaces• Pre-assembledTablet Holder: 117161Tablet Holder w/Deep V-Tabs: 117162

Tablet Holder Arm W/Spring ClampQuickly and Easily clamp and position a tablet where you need it - a desk, tray, table. • Modular Arm• Adjustable Tablet Holder• Spring Clamp that opens up to 2” for quick and

easy mounting on a variety of surfaces• Pre-assembledTablet Holder 8”: 110711Tablet Holder 8” w/Deep V-Tabs: 110712(8” arm suitable for most tablets)Tablet Holder 14”: 110721Tablet Holder 14” w/Deep V-Tabs: 110722(14” arm suitable for mini tablets or standard tablets if the arm is in a vertical position)

Tablet Holder w/Desktop BaseA great solution for using your tablet at a desk, table, counter, floor, on a tray; almost any flat surface will do. Don’t keep staring down at your tablet - raise it up.• Modular Arm• Adjustable Tablet Holder• Desktop Base 12” x 6”• Pre-assembledDesktop Holder 8”: 190711Desktop Holder 8” w/Deep V-Tabs: 190712(8” arm suitable for standard tablets)Desktop Holder 14”: 190721Desktop Holder 14” w/Deep V-Tabs: 190722(14” arm suitable for mini tablets or standard tablets if the arm is in a vertical position)

Universal Tablet HolderAlready have some ModularHose.com pieces or need to update? The tablet holder is available separately and could integrate into your current setup. Tailored for swift installation. Works with tablets measuring diagonally up to 15”.Tablet Holder: 570002

8” kit pictured

8” kit pictured

Don’t see the kit with the configuration you need? No problem. You can order the individual components and make it the way you want.

Our adjustable tablet holder works great with the Apple

iPad, iPad Mini, Microsoft Surface including the

Surface 3 Pro, Samsung Galaxy, Amazon Kindle,

B&N Nook, and most tablets and e-readers from Sony,

Asus, Lenovo, Google, Acer, Toshiba, Dell, and

more! Designed for tablets measuring diagonally up to

15” (381mm). Order the optional Deep V-Tabs for tablets with skins/cases up to .75” deep. A great solution for holding your tablet on a desk, table,

tray, wheelchair, counter, bed, and more. Depending

on your application, we recommend two arm

configurations to hold up a device that weighs between 1-2 lbs. Single

arm designs are popular because of the minimal

space it takes up but keep the arm short

and vertical so that it

can safely hold your

device.

Adjus

table

some sweet angle

holding action

Deep V-TabsExtra deep v-tabs for tablet holder, ideal for tablets & devices that are in a case or skins up to .75”.Deep V Tabs: 570009 (pack of 2)

The longer length is ideal for wrapping the arm around the back of the wheelchair and attaching with cable ties every few inches.

Disc with Adjustable ClampHelpful solution for positioning and holding a head switch or lightweight item on a tray or platform. Includes Velcro for quick attachment.• 1 or 2 Feet of Adjustable Arm• 3” Mounting Disc• Adjustable Clamp for Tube/Flat

Surface• Velcro® Hook and Loop Coin• Pre-assembledAdj. Clamp w/Disc, 1ft: 160221Adj. Clamp w/Disc, 2ft: 160241

14” kit pictured

Tablet Holder W/Plate & StrapsAdjustable straps hold tablet in place for hands free operation. Ideal for leg, sofa arms, car seats, and more.• Modular Arm• Adjustable tablet holder• Plate with straps• Pre-assembledTablet Holder: 130701Tablet Holder w/Deep V-Tabs: 130702

ModularHose.com

1 foot kit pictured

Tablet kits listed as “w/Deep V-Tabs” come with both standard V-Tabs and Deep V-Tabs.

Flat Surface MountAttaches Modular Hose to a flat surface.Flat Mount: 60533 (Pack of 2)

Double SocketDouble female piece. Double Socket: 61514 (Pack of 4)

Y FittingAllows you to branch off the hose.Y Fitting: 61511 (Pack of 2)

Elbow90° piece for quick turns.Elbow Fitting: 61515 (Pack of 2)

Velcro™ CoinsVelcro coins with adhesive backing make it easy to attach switches and more to the disc.1 7/8” diameter Hook & Loop: 90705 (1 set)

3M Dual Lock™Comes with (2) 1” x 3” pieces with adhesive.3M Dual Lock: 90707 (1 set)

Reusable Cable Ties10.5” cable ties allow for quick and easy setup.Reusable Cable Ties: 90712 (Pack of 100)

Add our silicone phone strap to give the disc even more versatility.Phone Strap: 501111

division of EDM Zap1108 Front Street - Lisle IL 60532 USA Phone: 1-630-922-5005 Fax: 1-630-852-3678info@modularhose.com www.modularhose.comdedicated AT site: www.assistive.solutions

Legal Mumbo Jumbo: Apple, iPad, Microsoft, Surface, Android, Velco, Loc-Line, and other brands we may have ‘accidentally’

mentioned we don’t own and are the fancy trademarks of someone else. Information contained could change and is

accurate as of a long time ago...in a galaxy, far, far, away...which is possibly another trademark violation.

Information subject to change at any time. v18092

ModularHose.com

Assistive Technology

Three inch disc holds a variety of switches, devices, and other items.

Two arm configuration ideal for evaluating two switch set-ups.

With supplied re-usable cable ties, easily connect to almost any chair.

The plastic ball and socket can be made longer or shorter to match your needs.

Flexible arm for putting the switch in the exact location you need and

easily adjustable if individual moves. In addition, if user hits

mounting arm too hard it will move and not

cause injury.

Tips for Mounting to a Wheelchair:Make sure you have a long enough length of modular hose to be able to mount. The ModularHose AT Kits come in different lengths, if you need more length it is easy to add more with the segment packs. If using cable ties, attaching the modular hose both vertically and horizontally every few inches will prevent swiveling. Make sure that you are not blocking any moveable parts of the chair. The ModularHose.com round tube clamp or spring clamps provide additional mounting options.

How Much Weight Can it Hold?The two variables that effect it the most are the length of the arm and the angle. Traditionally, the shorter the arm and the more vertical - the more weight it can hold. For example, a short 6” arm holding something vertically can likely hold several pounds but once you bend it towards horizontal, gravity takes over and the arm will not be able to hold it in position. For many applications we use a two arm system for tablets such as the iPad (1 to 1.5 lbs) because the arm can hold it up in almost any position. You can use a single arm for tablets but the length should be shortened and kept vertical. The arms are not recommended for devices over 2 lbs.

Double Arm with Mounting PlateIdeal for tablets, light-weight communication devices, multiple switches, as a platform, and more. The double arm system allows the Modular Hose to hold more weight. Works best for devices about 1.5 pounds or less. Does not include tablet case - use your own or attach the supplied dual lock directly to device.• 3 feet Adjustable Arm with Y Fitting• 4”x6” Mounting Plate• 2 Spring Clamps• 2 3M Dual Lock pieces• Pre-assembledDouble Arm with Mounting Plate: 113161

1 foot kit pictured

Clamp Arm w/Mounting PlateGreat for lightweight communication devices, multiple switches, platform and more. Kit includes pieces of Dual Lock for quick and easy attachment.• 1 or 2 Feet Adjustable Arm• 4”x6” Mounting Plate• Spring Clamp• 2 3M Dual Lock pieces• Pre-assembledClamp w/Plate, 1 ft: 110321Clamp w/Plate, 2 ft: 110341

Double Spring ClampShort and sweet - a couple of clamps for holding. Use for holding up items like pictures and learning boards or lightweight devices.• 1 or 2 Feet Adjustable Arm• 2 Spring Clamps• Pre-assembledTwo Clamp, 1ft: 110121Two Clamp, 2ft: 110141

Starter KitThis starter kit comes with common parts used in the AT field giving you the flexibility and options to create hundreds of different configurations immediately. Create a few ModularHose AT Kits or customize to your own needs.

• 12 Feet of Modular Hose/Arm• 4 - 3” Mounting Disc• 2 - 4”x6” Mounting Plate• 4 Spring Clamp• 1 Dual Use Clamp for Flat Surface or Round Tube• 4 Double Socket • 2 Y Fitting• 100 Reusable Cable Ties• 8 Velcro® Hook and Loop Coin• 6 3M Dual Lock® Strips• 1 Assembly Tool

ModularHose Starter Kit: 100001

2 foot kit pictured

The Starter Kits are chock full of AWESOMENESS!!! You can make several kits in this brochure and still have parts leftover.

Be Creative...this kit allows you to attach different items or devices to the plate. Depending on the configuration it can hold about 1.5 to 2 lbs.

Super Kit (updated)The super kit offers you goodies galore! Virtually all the parts used in the AT Field including weighted bases and a tablet holder, giving you the flexibility and option to create hundreds of different configurations immediately. Create a few standard ModularHose.com AT Kits or customize to your own needs.

ModularHose.com

* Super Kit features 122% of your daily modularabilitiness - that’s right, an extra 22%

ModularHose.com

How to Order?We accept Visa, Master Card, and American Express by either phone or online at ModularHose.com.Purchase orders are accepted from school districts, other educational institutions, assistive technology centers, and Fortune 1000 companies. Other organizations may also qualify for terms when credit information is supplied and approved.order online: www.modularhose.com email orders: sales@modularhose.com phone: 1-630-922-5005 fax order: 1-630-852-3678

ModularHose Super Kit: 100006

• 16 Feet of Modular Hose/Arm• 4 - 3” Mounting Disc• 2 - 4”x6” Mounting Plate• 6 Spring Clamp• 1 Dual Use Clamp• Mini Clamp• 10 Double Socket• 2 Y Fitting• 100 Reusable Cable Ties

• 5 Velcro® Hook and Loop Coin• 4 3M Dual Lock® Strips• 1 Assembly Tool• 1 Large Weighted Base• 1 Platform/Podium• 1 Tablet Holder• 1 Set of Tablet Deep V-Tabs• Silicone Phone Holder• Adjustable Phone Clamp

Giraffe Hands Free Drinking BottleThe Giraffe™ Bottle Hands Free Drinking Bottle allows users with various abilities to stay hydrated. The system is designed to be flexible and easy to use.• Clear 750ml/25oz Tritan Bottle (BPA free plastic)• Threaded Lid with Seal• Neck available in various lengths• Drinking Tube• Check Valve• Tube Cleaning Brush• Modular Design for easy part replacement• Markings in ml/oz on Bottle 9” Neck Giraffe Bottle: 504911, with clamp on aluminium bottle holder 50492115” Neck Giraffe Bottle: 504912, with clamp on aluminium bottle holder 50492220” Neck Giraffe Bottle: 504913, with clamp on aluminium bottle holder 50492325” Neck Giraffe Bottle: 504914, with clamp on aluminium bottle holder 50492430” Neck Giraffe Bottle: 504915, with clamp on aluminium bottle holder 50492536” Neck Giraffe Bottle: 504916, with clamp on aluminium bottle holder 504926

Extra / Replacement Bottle: 504111(other parts are available online)

Phone Holder w/Spring ClampA simple solution to hold you phone, music device, or other small device and position it where you need it. For devices 2.25” to 4” wide.• 1 or 2 Feet of Adjustable Arm• Adjustable Small Device Holder• Spring Clamp• Pre-assembledClamp w/Holder, 1ft: 110621Clamp w/Holder, 2ft: 110641

1 foot kit picturedI’m feeling 22CoverOur tablet holder with a Y fitting that allows a side arm holding a phone. Pretty Sweet!

Modular Arm / Hose SystemThe 3/4”ID System (1.25”OD) is the most common system in the Assistive Technology field. Add hose to make the length longer. Hose segments can be separated at each bead.1 Foot Segment Pack: 61501

Comes as two 6” segments - snap them together to make a foot - or separate the beads for different configurations

25 Foot Segment Box: 69540 Comes as fifty-nine 6” segments50 Foot Coil: 69541 Comes as a continuous coil

Assembly ToolThe tool is designed for assembly and makes putting it together quicker - but not required. 3/4”ID Assembly Tool: 78004

Silicone Phone StrapWorks with the 3” mounting disc and stretches around phone. Also works with the adjustable phone clip for extra hold. Disc/Hose not included.Phone Strap: 501111

Adjustable Phone ClipScales and adjusts to most phones & cases. Hose not included.Adjustable Phone Clip: 501123

Adjustable Cup HolderTabs adjust to difference size cups and features a secure built in tray. Folds flat when not in use.Adjustable Cup Holder: 500301

Aluminium Bottle HolderSturdy aluminium holder that can be slightly bent to accommodate different size bottles. Available with adjustable clamp that rotates or with modular hose mounting bead.Bottle Holder with Modular Hose: 500312Bottle Holder with Clamp: 500311

Plate with StrapsUse this to attach the system to leg, arm, bed, chair, and more. 4”x6” plate with dual 24” quick release adjustable straps.Plate with Straps: 530041

Mounting DiscFlat surface allows for easy attaching of switches, small devices, and more. Attach items using optional velcro or similar. Optional silicone strap extends use for attaching phones and music players.Mounting Disc: 522301

Camera/Device Mounting DiscMounting disc with standard 1/4”-20 bolt. Allows for cameras and other devices to attach to the discMounting Disc: 522311

Mounting PlateThe mounting bead is attached to a 4” x 6” Plate and offers a larger surface to attach items with Velcro, Dual Lock, glue, or simply screw it right to the polycarbonate plate. Mounting Plate: 530001

Podium Style PlateA podium style 8.5” x 11” platform/tray with a 1.5” lip for holding items in place. Features 3 mounting beads on the back for attaching one, two, or even three arms. Great for a variety of applications.Podium Style Plate: 540001

Tablet HolderThe tablet holder is available separately and could integrate into your current setup. Works with tablets measuring diagonally up to 15”.Deep V-Tabs: 570002

Tablet Holder Deep V-TabsExtra deep v-tabs for universal tablet holder, ideal for tablets and devices that are in a case or skin up to .75”.Deep V-Tabs: 570009 (Pack of 2)

Compact Desktop BaseThis weighted base is ideal for flat surfaces including desks and trays. Add an arm and it is great for holding up small devices like mini tablets in a vertical position. Approximately 7” x 3.75”, .9 lbs.Small Desktop Base: 580001

Desktop BaseWeighted base works well with standard size tablets such as the iPad when combined with an arm and holder. Approximately 12” x 6”, 2.2 lbs.Large Desktop Base: 590001

Spring Clamp with BeadThis Spring Clamp opens to a 2” opening and has a modular hose starter piece already attached. Spring clamps make attaching to flat surfaces quick and easy.Spring Clamp with Mounting Bead: 510001

Round Tube ClampA compact solution for mounting modular hose to round tubes such as wheel chairs, bed frames, and more. Works with 1” or 7/8” tubing.• Round Tube Clamp with Knob• Modular Hose Connector• Modular Hose Double Socket• Grip LinerRound Tube Clamp Kit: 511001

Tube/Flat Surface MountThis clamp is ideal for mounting arms and more to round tubes and flat surfaces. Adjustable jaw opens up to 2.5” and closes with twist handle. Includes wedge for clamping onto flat surfaces. Tube/Flat Surface Mount: 512001

Mini ClampThis mini Clamp opens to up to a 1.5” opening and has a modular hose bead attached.Mini Clamp with Mounting Bead: 514113

Double Disc Mounting SolutionThis popular kit is great for double head switch situations and the 6ft kit gives you enough length to customize.• 3 or 6 feet Adjustable Arm• 2 - 3” Mounting Disc• 10 (3ft) or 20 (6ft) Reusable Cable

Ties• 2 Velcro® Hook and Loop Coin sets• Pre-assembledDouble Disc, 3ft: 120261Double Disc, 6ft: 120291

6 foot kit pictured

6 foot kit pictured

Single Disc Mounting SolutionGreat starter kit for switches and other items. Available in 3 foot or 6 foot versions.• 3 or 6 feet Adjustable Arm• 3” Mounting Disc• 10 (3ft kit) or 20 (6ft kit)

Reusable Cable Ties• Velcro® Hook and Loop Coin• Pre-assembledSingle Disc, 3 Feet: 120061Single Disc, 6 Feet: 120091

Mix and MatchRemember, the system is

designed to come apart and to be reassembled - in different configurations. You can take

apart a kit and make it something else. Individual

components are available to extend the use of the system. So if you have one or two kits, take them apart and make

something new.

Platform/Podium One ArmA podium style tray that is 8.5”x11” featuring a slightly longer arm for holding up all sorts of stuff. Tablets and devices with large cases, pictures, learning aids, workbooks, and much more.• 8” or 14” Adjustable Arm• Spring Clamp• 3 Installed Mounting Beads for Different Configurations• Pre-assembledPlatform/Podium 8”: 110411Platform/Podium 14”: 110421

Platform/Podium Two ArmThey say, two arms are better than one. This kit offers excellent support of heavier items such as a tablet or communication device. The two arm holder is also helpful for holding items across a lap on a wheelchair or desk.• Dual 18” Adjustable Arm• 2 Spring Clamps• 3 Installed Mounting Beads for Different Configurations• Pre-assembledPlatform/Podium Two Arm: 114161

Disc with Spring ClampA simple solution to place a switch (or whatever) where you want it. Includes Velcro for quick attachment.• 1 or 2 Feet of Adjustable Arm• 3” Mounting Disc• Spring Clamp• Velcro® Hook and Loop Coin• Pre-assembledSpring Clamp w/Disc, 1ft: 110221Spring Clamp w/Disc, 2ft: 110241

1 foot kit pictured

Platform/Podium DesktopA podium style tray that is 8.5”x11”

with a fancy-schmancy desktop base. Great for all sorts of applications including on the table or floor.

• 8” Adjustable Arm• Spring Clamp

• 3 Installed Mounting Beads for Different Configurations

• Pre-assembledPlatform/Podium Desktop: 190411

The podium part comes with 3 mounting beads on the back. You can use it with one, two or even three arms. Dare we say, maximum “mountability”.

Tablet Holder Two Arm Spring ClampThe two arm kit is great for wheelchairs and other locations where the tablet could be moved in multiple positions. The two arm holder works well with tablets weighing 1.5 to 2 lbs or less.• 2 Modular 18” Arms with integrated Y fitting to

create a bridge for maximum stability• Adjustable Tablet Holder• 2 Spring Clamps that open up to 2” for quick

and easy mounting on a variety of surfaces• Pre-assembledTablet Holder: 117161Tablet Holder w/Deep V-Tabs: 117162

Tablet Holder Arm W/Spring ClampQuickly and Easily clamp and position a tablet where you need it - a desk, tray, table. • Modular Arm• Adjustable Tablet Holder• Spring Clamp that opens up to 2” for quick and

easy mounting on a variety of surfaces• Pre-assembledTablet Holder 8”: 110711Tablet Holder 8” w/Deep V-Tabs: 110712(8” arm suitable for most tablets)Tablet Holder 14”: 110721Tablet Holder 14” w/Deep V-Tabs: 110722(14” arm suitable for mini tablets or standard tablets if the arm is in a vertical position)

Tablet Holder w/Desktop BaseA great solution for using your tablet at a desk, table, counter, floor, on a tray; almost any flat surface will do. Don’t keep staring down at your tablet - raise it up.• Modular Arm• Adjustable Tablet Holder• Desktop Base 12” x 6”• Pre-assembledDesktop Holder 8”: 190711Desktop Holder 8” w/Deep V-Tabs: 190712(8” arm suitable for standard tablets)Desktop Holder 14”: 190721Desktop Holder 14” w/Deep V-Tabs: 190722(14” arm suitable for mini tablets or standard tablets if the arm is in a vertical position)

Universal Tablet HolderAlready have some ModularHose.com pieces or need to update? The tablet holder is available separately and could integrate into your current setup. Tailored for swift installation. Works with tablets measuring diagonally up to 15”.Tablet Holder: 570002

8” kit pictured

8” kit pictured

Don’t see the kit with the configuration you need? No problem. You can order the individual components and make it the way you want.

Our adjustable tablet holder works great with the Apple

iPad, iPad Mini, Microsoft Surface including the

Surface 3 Pro, Samsung Galaxy, Amazon Kindle,

B&N Nook, and most tablets and e-readers from Sony,

Asus, Lenovo, Google, Acer, Toshiba, Dell, and

more! Designed for tablets measuring diagonally up to

15” (381mm). Order the optional Deep V-Tabs for tablets with skins/cases up to .75” deep. A great solution for holding your tablet on a desk, table,

tray, wheelchair, counter, bed, and more. Depending

on your application, we recommend two arm

configurations to hold up a device that weighs between 1-2 lbs. Single

arm designs are popular because of the minimal

space it takes up but keep the arm short

and vertical so that it

can safely hold your

device.

Adjus

table

some sweet angle

holding action

Deep V-TabsExtra deep v-tabs for tablet holder, ideal for tablets & devices that are in a case or skins up to .75”.Deep V Tabs: 570009 (pack of 2)

The longer length is ideal for wrapping the arm around the back of the wheelchair and attaching with cable ties every few inches.

Disc with Adjustable ClampHelpful solution for positioning and holding a head switch or lightweight item on a tray or platform. Includes Velcro for quick attachment.• 1 or 2 Feet of Adjustable Arm• 3” Mounting Disc• Adjustable Clamp for Tube/Flat

Surface• Velcro® Hook and Loop Coin• Pre-assembledAdj. Clamp w/Disc, 1ft: 160221Adj. Clamp w/Disc, 2ft: 160241

14” kit pictured

Tablet Holder W/Plate & StrapsAdjustable straps hold tablet in place for hands free operation. Ideal for leg, sofa arms, car seats, and more.• Modular Arm• Adjustable tablet holder• Plate with straps• Pre-assembledTablet Holder: 130701Tablet Holder w/Deep V-Tabs: 130702

ModularHose.com

1 foot kit pictured

Tablet kits listed as “w/Deep V-Tabs” come with both standard V-Tabs and Deep V-Tabs.

Flat Surface MountAttaches Modular Hose to a flat surface.Flat Mount: 60533 (Pack of 2)

Double SocketDouble female piece. Double Socket: 61514 (Pack of 4)

Y FittingAllows you to branch off the hose.Y Fitting: 61511 (Pack of 2)

Elbow90° piece for quick turns.Elbow Fitting: 61515 (Pack of 2)

Velcro™ CoinsVelcro coins with adhesive backing make it easy to attach switches and more to the disc.1 7/8” diameter Hook & Loop: 90705 (1 set)

3M Dual Lock™Comes with (2) 1” x 3” pieces with adhesive.3M Dual Lock: 90707 (1 set)

Reusable Cable Ties10.5” cable ties allow for quick and easy setup.Reusable Cable Ties: 90712 (Pack of 100)

Add our silicone phone strap to give the disc even more versatility.Phone Strap: 501111

division of EDM Zap1108 Front Street - Lisle IL 60532 USA Phone: 1-630-922-5005 Fax: 1-630-852-3678info@modularhose.com www.modularhose.comdedicated AT site: www.assistive.solutions

Legal Mumbo Jumbo: Apple, iPad, Microsoft, Surface, Android, Velco, Loc-Line, and other brands we may have ‘accidentally’

mentioned we don’t own and are the fancy trademarks of someone else. Information contained could change and is

accurate as of a long time ago...in a galaxy, far, far, away...which is possibly another trademark violation.

Information subject to change at any time. v18092

ModularHose.com

Assistive Technology

Three inch disc holds a variety of switches, devices, and other items.

Two arm configuration ideal for evaluating two switch set-ups.

With supplied re-usable cable ties, easily connect to almost any chair.

The plastic ball and socket can be made longer or shorter to match your needs.

Flexible arm for putting the switch in the exact location you need and

easily adjustable if individual moves. In addition, if user hits

mounting arm too hard it will move and not

cause injury.

Tips for Mounting to a Wheelchair:Make sure you have a long enough length of modular hose to be able to mount. The ModularHose AT Kits come in different lengths, if you need more length it is easy to add more with the segment packs. If using cable ties, attaching the modular hose both vertically and horizontally every few inches will prevent swiveling. Make sure that you are not blocking any moveable parts of the chair. The ModularHose.com round tube clamp or spring clamps provide additional mounting options.

How Much Weight Can it Hold?The two variables that effect it the most are the length of the arm and the angle. Traditionally, the shorter the arm and the more vertical - the more weight it can hold. For example, a short 6” arm holding something vertically can likely hold several pounds but once you bend it towards horizontal, gravity takes over and the arm will not be able to hold it in position. For many applications we use a two arm system for tablets such as the iPad (1 to 1.5 lbs) because the arm can hold it up in almost any position. You can use a single arm for tablets but the length should be shortened and kept vertical. The arms are not recommended for devices over 2 lbs.

Double Arm with Mounting PlateIdeal for tablets, light-weight communication devices, multiple switches, as a platform, and more. The double arm system allows the Modular Hose to hold more weight. Works best for devices about 1.5 pounds or less. Does not include tablet case - use your own or attach the supplied dual lock directly to device.• 3 feet Adjustable Arm with Y Fitting• 4”x6” Mounting Plate• 2 Spring Clamps• 2 3M Dual Lock pieces• Pre-assembledDouble Arm with Mounting Plate: 113161

1 foot kit pictured

Clamp Arm w/Mounting PlateGreat for lightweight communication devices, multiple switches, platform and more. Kit includes pieces of Dual Lock for quick and easy attachment.• 1 or 2 Feet Adjustable Arm• 4”x6” Mounting Plate• Spring Clamp• 2 3M Dual Lock pieces• Pre-assembledClamp w/Plate, 1 ft: 110321Clamp w/Plate, 2 ft: 110341

Double Spring ClampShort and sweet - a couple of clamps for holding. Use for holding up items like pictures and learning boards or lightweight devices.• 1 or 2 Feet Adjustable Arm• 2 Spring Clamps• Pre-assembledTwo Clamp, 1ft: 110121Two Clamp, 2ft: 110141

Starter KitThis starter kit comes with common parts used in the AT field giving you the flexibility and options to create hundreds of different configurations immediately. Create a few ModularHose AT Kits or customize to your own needs.

• 12 Feet of Modular Hose/Arm• 4 - 3” Mounting Disc• 2 - 4”x6” Mounting Plate• 4 Spring Clamp• 1 Dual Use Clamp for Flat Surface or Round Tube• 4 Double Socket • 2 Y Fitting• 100 Reusable Cable Ties• 8 Velcro® Hook and Loop Coin• 6 3M Dual Lock® Strips• 1 Assembly Tool

ModularHose Starter Kit: 100001

2 foot kit pictured

The Starter Kits are chock full of AWESOMENESS!!! You can make several kits in this brochure and still have parts leftover.

Be Creative...this kit allows you to attach different items or devices to the plate. Depending on the configuration it can hold about 1.5 to 2 lbs.

Super Kit (updated)The super kit offers you goodies galore! Virtually all the parts used in the AT Field including weighted bases and a tablet holder, giving you the flexibility and option to create hundreds of different configurations immediately. Create a few standard ModularHose.com AT Kits or customize to your own needs.

ModularHose.com

* Super Kit features 122% of your daily modularabilitiness - that’s right, an extra 22%

ModularHose.com

How to Order?We accept Visa, Master Card, and American Express by either phone or online at ModularHose.com.Purchase orders are accepted from school districts, other educational institutions, assistive technology centers, and Fortune 1000 companies. Other organizations may also qualify for terms when credit information is supplied and approved.order online: www.modularhose.com email orders: sales@modularhose.com phone: 1-630-922-5005 fax order: 1-630-852-3678

ModularHose Super Kit: 100006

• 16 Feet of Modular Hose/Arm• 4 - 3” Mounting Disc• 2 - 4”x6” Mounting Plate• 6 Spring Clamp• 1 Dual Use Clamp• Mini Clamp• 10 Double Socket• 2 Y Fitting• 100 Reusable Cable Ties

• 5 Velcro® Hook and Loop Coin• 4 3M Dual Lock® Strips• 1 Assembly Tool• 1 Large Weighted Base• 1 Platform/Podium• 1 Tablet Holder• 1 Set of Tablet Deep V-Tabs• Silicone Phone Holder• Adjustable Phone Clamp

Giraffe Hands Free Drinking BottleThe Giraffe™ Bottle Hands Free Drinking Bottle allows users with various abilities to stay hydrated. The system is designed to be flexible and easy to use.• Clear 750ml/25oz Tritan Bottle (BPA free plastic)• Threaded Lid with Seal• Neck available in various lengths• Drinking Tube• Check Valve• Tube Cleaning Brush• Modular Design for easy part replacement• Markings in ml/oz on Bottle 9” Neck Giraffe Bottle: 504911, with clamp on aluminium bottle holder 50492115” Neck Giraffe Bottle: 504912, with clamp on aluminium bottle holder 50492220” Neck Giraffe Bottle: 504913, with clamp on aluminium bottle holder 50492325” Neck Giraffe Bottle: 504914, with clamp on aluminium bottle holder 50492430” Neck Giraffe Bottle: 504915, with clamp on aluminium bottle holder 50492536” Neck Giraffe Bottle: 504916, with clamp on aluminium bottle holder 504926

Extra / Replacement Bottle: 504111(other parts are available online)

Phone Holder w/Spring ClampA simple solution to hold you phone, music device, or other small device and position it where you need it. For devices 2.25” to 4” wide.• 1 or 2 Feet of Adjustable Arm• Adjustable Small Device Holder• Spring Clamp• Pre-assembledClamp w/Holder, 1ft: 110621Clamp w/Holder, 2ft: 110641

1 foot kit picturedI’m feeling 22CoverOur tablet holder with a Y fitting that allows a side arm holding a phone. Pretty Sweet!

Quickclick

match align click and lock

Quickly and easily switch between accessories.

Add this part to your ModularHose system to use the QuickClick system

ACCESSORIES

SPRING CLAMPApproximately 6” in length and has a 2” opening with heavy duty vinyl tips.# 201511

ADJUSTABLE CLAMPVersatile clamp mounts to flat surfaces or round tubes. Jaw opens to 2”. Accepts QuickClick and hex stud# 201513

PHONE HOLDERAdjusts to most phones and cases. For devices 2.25” to 4” wide.# 201545

TABLET HOLDERAdjustable tablet holder scales to hold virtually all tablets on their corners. # 201541

Optional: Add the deep v-tabs to hold tablets that are in a case up to .75”. # 570009

BOTTLE HOLDERAluminum bottle cage that can be adjusted to accommodate different bottles.# 201561

DESKTOP BASEWeighted base great for desks, tables, or other flat surfaces. Approximately 12”x6”, 2.2 lbs.# 201531

MINI CLAMPIdeal for round tubes but also works on flat surfaces. opens up to 1.5”.# 201515

QUICKCLICK CONNECTORAttach the QuickClick connector to your own device such as a camera with the included bolt.# 201221

PODIUMThis 8.5”x11” podium/platform has a 1.5” lip for holding items in place.# 201575

DISCThe flat 3” surface disc allows for easy attaching of a variety of items with the included velcro.# 201571

v1901

PLATEThe flat 4”X6” plate allows for easy attaching of a variety of items with the included dual lock.# 201573

ModularHose.com

QUICKCLICK ADAPTERAdd to the ModularHose system to adapt to the QuickClick system.# 213390

Quickclick