– E6961A Automotive Ethernet Tx Compliance Solution
– E6960A 1000Base-T1 Tx Compliance Application
– N6467B BroadR-Reach Compliance Application
– N8847A BroadR-Reach Protocol Trigger & Decode
– E6964A BroadR-Reach MDI S-parameter Application
– E6962A Automotive Ethernet Rx Compliance Solution
– E6963A Automotive Ethernet Link Segment Compliance Solution
All compliance and protocol application are compliant to BroadR-Reach V3.2 as well as 100Base-T1(IEEE 802.3bw) or 1000Base-T1 (IEEE 802.3bp) respectively.
Keysight TechnologiesAutomotive Ethernet Solutions
02 | Keysight | Automotive Ethernet Solutions - Brochure
www.keysight.com/find/automotive-ethernet
Automotive Ethernet-Driving the Future
Automotive Ethernet uses an Ethernet-based network for connections between in-vehicle electronic systems. Automotive Ethernet enables faster data communication to meet the demands of today’s vehicles and the connected cars of the future. Ethernet technology as an auto connectivity standard helps cut production costs and reduces design complexity by providing a centralized, high-performance communication network.
Connected Car
Automotive electronics are increasingly complex with more sensors, controls, and interfaces using higher bandwidth, which requires faster data throughput and more reliable networks.
The different sub-systems in a vehicle need to communicate with one another. The complexity, cost, and weight of wiring harnesses has increased so rapidly that today, wiring is the third most expensive and third heaviest component in a car!
Currently, different manufacturers use their own unique proprietary standards for automotive communication, with each component typically using a dedicated wire or cable. Ethernet networks allow the use of a single connectivity standard across all manufacturers and improves communication between car components.
The Connected Car
The cloudData services, reporting
and tracking
Climate controlsystems
Power seat control
Anti-lock braking
Tire pressuremonitoring
PODS for air bagsystems
eCalls
Hands-freetelephony
GPS
Powertrain &engine management(MiL, SiL, HiL)
Rear-view camera
Backup sensors
77, 79 GHz
Collision avoidance
LTE-v
DSCR
Ethernet
Ethernet Ethernet Ethernet Ethernet Ethernet
Secure cloudaccess gateway
Body/comfortsystems
LIN
Chassis/safetysystems
CAN/CAN FD/FlexRay
Infotainmentsystems
USB
Powertrainsystems
CAN/CAN FD/FlexRay
Camera (ADAS)systems
Automotiveradar
V2Vcommunication
03 | Keysight | Automotive Ethernet Solutions - Brochure
www.keysight.com/find/automotive-ethernet
Ethernet has already proven itself as a secure transfer medium that can handle large amounts of data as well as reduce connectivity costs and cabling weight.
BroadR-Reach, developed by Broadcom Corporation, is an Ethernet physical layer standard designed for use in automotive connectivity applications. IEEE standardized the technology with 802.3bw (100Base-T1) expanded to add 802.3bp (1000Base-T1) and now OPEN (One Pair EtherNet) Alliance maintains the automotive Ethernet standards.
The challengeEach sub-system working in the car ecosystem is an important component in automotive communication, involving multilayer design, engineering, and test teams. Ethernet allows each team to understand the communication between all of these subsystems and integrate them into a high-performance network.
The tests and test setup to validate BroadR-Reach, 100Base-T1, and 1000Base-T1 specifications for physical media attachment (PMA), physical layer solutions (PHY), and physical coding sublayer (PCS) are complex and time-consuming. Automotive Ethernet compliance testing consists of a finite set of tests as described by the standards. However, the testing requires 15 different configurations covering up to 10 different pieces of test equipment, wiring harnesses, cables, connectors and, test fixtures in order to comply with all of the required Tx, Rx, and link segment tests. Knowing whether your automotive system passes or fails the required standards compliance tests provides valuable insight and saves you numerous hours of valuable design time.
Reliable, High-Performance Automotive Ethernet
Keysight Technologies, Inc. has removed the complexity and headache involved in setting up and executing the tests necessary for compliance with BroadR-Reach automotive Ethernet standards for Tx, link segment and Rx connectivity. Keysight automotive Ethernet solutions provide software, instruments, fixtures and cables ready for complete testing of BroadR-Reach, 100Base-T1 and 1000Base-T1 standards. Whether you’re focused on design or validation, our automotive Ethernet solutions will accelerate your innovations from debug to characterization, to compliance, to completion.
Keysight BroadR-Reach, 100Base-T1 and 1000Base-T1 applications perform end-to-end functional and standards-compliance conformance testing of BroadR-Reach devices, with optional protocol decoding. Our Automotive Ethernet solutions suite not only give you all of the hardware, software, cables and accessories you need to enable compliance tests, they also provide:
– A setup wizard for quick and easy setup, configuration and test – A wide range of tests enabling faster and easier standards conformance – Accurate and repeatable results from Keysight precision instrumentation – Automated reporting in a comprehensive HTML format with margin analysis
Automotive Ethernet enables a single standard across all manufacturers witha 30% reduction in cabling weight and a 80% reduction in connectivity costsover today’s multiple proprietary standards.
04 | Keysight | Automotive Ethernet Solutions - Brochure
www.keysight.com/find/automotive-ethernet
Transmitter Link Segment Receiver
BroadR-Reach Compliance Solutions
Faster, More Efficient Automotive Ethernet Testing
Keysight’s solutions automate testing and validation of BroadR-Reach 100 Mb/s and 1,000 Mb/s automotive Ethernet for testing the electrical signaling of the physical media attachment (PMA) of both Tx and Rx, for the physical coding sublayer (PCS) and physical layer (PHY) control, as well as the media dependent interface (MDI) return loss. These tests are the primary components needed to verify that your automotive designs conform to the BroadR-Reach and IEEE standards.
– E6961A Automotive Ethernet Tx Compliance Solution – E6960A 1000Base-T1 Tx Compliance Application – N6467B BroadR-Reach Compliance Application (100Base-T1 compliant) – N8847A BroadR-Reach Protocol Trigger & Decode (100Base-T1 compliant) – E6964A BroadR-Reach MDI S-parameter Application (100Base-T1 compliant)
– E6962A BroadR-Reach Receiver Solution (100Base-T1 compliant)
– E6963A BroadR-Reach Link Segment Application (100Base-T1 compliant)
Solution component overview for BroadR-Reach
Key Features – Test applications including:
– Protocol trigger and decode compliant to BroadR-Reach V3.2 as well as 100Base-T1 (IEEE 802.3bw) standards – 100% test coverage for link segment tests using BroadR-Reach/100Base-T1 (IEEE 802.3bw) definitions for communications
channel version 2.0 – Bit error rate verification for Rx tests against BroadR-Reach V3.2 as well as 100Base-T1 (IEEE 802.3bw) standards – All required BroadR-Reach 100Base-T1 (IEEE 802.3bw) and 1000Base-T1 Tx (IEEE 802.3bp) tests
– Highly automated and easy-to-use – Report generation with pass/fail test results and fully annotated screen captures
05 | Keysight | Automotive Ethernet Solutions - Brochure
www.keysight.com/find/automotive-ethernet
Bundle detailsBundles give you all of the licensed application software as well as option to purchase all connectors, cables, and hardware for each solution. Application bundles include model numbers listed in Table 1. For complete ordering information see www.keysight.com/find/E6961A for Tx configuration, www.keysight.com/find/E6962A for Rx configuration and www.keysight.com/find/E6963A for link segment configuration.
BroadR-Reach Solution Bundles
1. Instrument bundles for BroadR-Reach/100Base-T1 TX and 1000Base-T1 TX are identical except for protocol fixture and software.2. MDI S-parameter software is ordered under E6961A as an option
Table 1.
E6961A BroadR-Reach/100 Base-T11
E6961A Tx 1000Base-T11
E6961A BroadR-Reach/100Base-T1 MDI S-parameter2
E6962A BroadR-Reach/100Base-T1
E6963A BroadR-Reach 100BaseT1 Link Segment
Software N6467B BroadR-Reach Compliance Application (100Base-T1 compliant) E6960A 1000Base-T1 Tx
Compliance ApplicationE6964A MDI S-parameter
BroadR-Reach (100Base-T1 compliant) Compliance Application
E6962A BroadR-Reach Receiver Application
(100Base-T1 compliant)
E6963A BroadR-Reach Link Segment Application (100Base-T1 compliant)N8847A BroadR-Reach
Protocol Trigger & Decoder (100Base-T1
compliant)
Accessories E6960A-26600frequency divider board
SMA cable SMA cable and adapters
N5395C Ethernet test fixture 11667B power splittersN4431B RF Electronic
calibration module
Energy efficient Ethernet text fixture
applies only to protocol
1131B Infiniimax 3.5 differential probe and E2678B probe head
SMA cables and adapters
82357B USB/GPIB interface
N4431B Ecal 4 ports and connectors
HardwareE5071C ENA Vector Network Analyzer, options 440,810, 820 M9010A PXIe Chassis
E5071C ENA Vector Network Analyzer with
option TDR
DSOS254A oscilloscope 2.5 GHz, 4 analog channelsM9037A PXIe High
Performance Embedded Controller
N9010A EXA Signal analyzer , 10 Hz to 44 GHz with option 503 and FSA
M3302A PXIe PXIe AWG and Digitizer
Combination
81150A Pulse Function Arbitrary Noise Generator, 2 channel
06 | Keysight | Automotive Ethernet Solutions - Brochure
This information is subject to change without notice.© Keysight Technologies, 2017Published in USA, October 20, 20175992-2561ENwww.keysight.com
www.keysight.com/find/automotive-ethernet
Evolving Since 1939Our unique combination of hardware, software, services, and people can help you reach your next breakthrough. We are unlocking the future of technology. From Hewlett-Packard to Agilent to Keysight.
Keysight software is downloadable
expertise. From first simulation
through first customer shipment, we
deliver the tools your team needs to
accelerate from data to information
to actionable insight.
Learn more atwww.keysight.com/find/software
Start with a 30-day free trial. www.keysight.com/find/free_trials
– Application software
Download your next insight
www.axiestandard.orgAdvancedTCA® Extensions for Instrumentation and Test (AXIe) is an open standard that extends the AdvancedTCA for general purpose and semiconductor test. The business that became Keysight was a founding member of the AXIe consortium. ATCA®, AdvancedTCA®, and the ATCA logo are registered US trademarks of the PCI Industrial Computer Manufacturers Group.
www.lxistandard.org
LAN eXtensions for Instruments puts the power of Ethernet and the Web inside your test systems. The business that became Keysight was a founding member of the LXI consortium.
www.pxisa.org
PCI eXtensions for Instrumentation (PXI) modular instrumentation delivers a rugged, PC-based high-performance measurement and automation system.