BR
US
HC
UTT
baumalight.com - 1-866-820-7603 U100
Find your closest dealer online.
FIND THE RIGHT FLOW FOR YOUR
CARRIER ONLINE AT BAUMALIGHT.COM
CLICK HERE FORCARRIER MEASUREMENTS
BR
US
HC
UTT
With fi ve models to choose from, the skidsteer Brush Cutt offers the versatility to fi t your equipment and your property needs. The rugged two blade model is ready to tackle all your brush and trees up to 2” in diameter while the 4 blade model with its open-mouth design and brush bar are ready to tackle brush up to 3” in diameter and can fell trees up to 10” in diameter. Additionally, the available disc mulcher model is a heavy-duty rotary brush mower designed to effi ciently destroy dense vegetation and features a 1” thick steel rotor and industry-leading bent axis piston motors.
Taking the Brush Cutt to new heights are the new excavator models. Whole trees can be chopped from the top down. (up to 6” diameter). These models trim, cut and mulch as high as you can reach. A wide range of versatility and applications, just like the Brush Cutt’s appetite.
Load up your tractor with a Brush Cutt and take your property back. This heavy duty brush destroying machine will chop down, tear up and spit out all of the overgrown areas of your property.
PTO
SKIDSTEER
EXCAVATOR
Part No. Description Weight
D001041 Brush Cutt Swing Blade (per pc) 5 lbs
D001275 1” Castle Nut for Swing Blade
D001276 1” Blade bolt with Cross hole for Swing blade
D001779 1” hardened washer for swing blade
R7000 Ripper 700 Series Replacement Brush Fire Tooth
D002268 30-Pack 700 Series Replacement Ripper Teeth 32 lbs
S1000 Replacement Carbide Tooth (without nut) .4 lbs
D001627 24-Pack (Package of 24 pcs S1000 teeth) 8 lbs
New shipping policy, please see last pagebaumalight.com - 1-866-820-7603 U
101
Load up your tractor with a Brush Cutt and take your property back. This heavy duty brush destroying machine will chop down, tear up and spit out all of the overgrown areas of your property.
Taking back your property can be a rough job. We designed and built the
deck as a solid platform to take on the task. Built from rugged 1/4 inch
steel and then further reinforced with support channels it’s a solid base of
operations.
Designed for easy serviceability the 4-way models feature a heavy duty rotor
with 4 fixed extensions. Each extension is finished off with a slasher blade.
This configuration is capable of providing up to 52 slashes per second.
A heavy duty chain curtain reduces discharge of debris. Unlike traditional
chain curtains Baumalight’s Brush Cutt utilizes a curtain rod setup that is
free of welds. This setup allows the chain to absorb the impacts and places
less strain on the welded link for longer curtain life.
PTO Models
FEATURES
4-Way Models
Chain Curtain
Deck Strength
SEE IT IN ACTIONbaumalight.com
BR
US
HC
UTT
baumalight.com - 1-866-820-7603 U102
PTO Models
Shield
Gear Box
A Real Slasher
Specifications
Rotor
Four Cuts Per Pass
Model No. CP560 CP572
Maximum Brush Size 4”
Discharge ProtectionOpen Front with Push Bar Link
Chain Curtain on Back
Path Width 70” 82”
Cutting Width 60” 72”
Low Cutting Height 2.5”
Number of Blades 4
Slashes per Second 52
Attachment Type CAT 2
Maximum Engine HP 75 85
Maximum PTO HP 65 75
Minimum Carrier Weight 4000 lbs. 5000 lbs.
System Protection 2-Disk Clutch 4-Disk Clutch
Shipping Dimensions (LxWxH) 88”x72”x36” 88”x72”x36”
Deck Structure 1/4” steel
Unit Weight 1,550 lbs. 1,885 lbs.
BR
US
HC
UTT
To protect the output shaft from impact or contamination caused by debris, each model of Brush Cutt is fi nished off with a heavy duty output shaft shield.
Using a 3/4” top plate and a 3/8” bottom plate this heavy duty rotor sandwiches the 4-way blade assembly in place.
The Brush Cutt uses a bevel gearbox capable of handling up to 90HP for fi nal drive output. More durable than conventional direct drive setups these gearboxes prevent shocks from cutting being passed to the drive motor.
The curved cutting tips of the slasher blades give the Brush Cutt four cuts per pass of each blade. The leading tip takes a small bite and is immediately followed by the second tip taking another bite. These hungry blades chew into the brush at rates from 26- 52 slashes per second with devastating results.
Available in a 4 blade confi guration the Brush Cutts reversible/replaceable blades are made of long lasting 1/4” AR400 steel. The unique blade design not only provides more cutting surface but also allows the blades to mulch as they cut.
The 4-way blade design provides more blade, doubling the slashes per second translating into greater cutting power. The 4-way blade can easily handle small trees up to 4” in diameter.*
New shipping policy, please see last pagebaumalight.com - 1-866-820-7603 U
103
SEE IT IN ACTIONbaumalight.com
BR
US
HC
UTT
With two models to choose from in the 300 series, the skidsteer Brush Cutt offers the ver-satility to fit your equipment and your property needs. This rugged two-blade model is ready to tackle brush and trees up to 2” in diameter and features curved cutting tips on the slasher blades to deliver two cuts per pass of each blade. With a sturdy blade mount, durable platform, and heavy-duty front and rear chain curtains, the skidsteer Brush Cutt to work for you on your property.
300 Series Skid Steer Models
Deck Strength
A Real Slasher
Two Cuts Per Pass Blade Mount
Front & Rear Chain Curtains
FEATURES
SKID STEER MODELS
The Brush Cutt’s reversible and replaceable 2-blade configuration is made of long-lasting 1/4” AR400 steel and can take down brush and trees up to 2” in diameter. This unique blade design not only provides more cutting surface but also allows the blades to mulch as they cut, adding additional versatility while improving your productivity.
The curved cutting tips of the slasher blades give the Brush Cutt two cuts per pass of each blade. The leading tip takes a small bite and is immediately followed by the second tip taking another bite. These hungry blades chew into the brush at rates from 26- 52 slashes per second with devastating results.
Taking back your property can be a rough job. We designed and built the deck as a solid platform to take on the task. Built from rugged 1/4 inch steel and then further reinforced with support channels it’s a solid base of operations.
Heavy duty front and rear chain curtains reduce discharge of debris. Unlike traditional chain curtains Baumalight’s Brush Cutt utilizes a curtain rod setup that is free of welds. This setup allows the chains to absorb the impacts and places less strain on the welded link for longer curtain life.
To secure slasher blades to the blade assembly Baumalight uses Gr. 8 bolts capped off with castle nuts and cotter pins. The blade mount uses a fully welded collar to drop the blade - this spacing helps to reduce the blade from binding while in operation.
baumalight.com - 1-866-820-7603 U104
BR
US
HC
UTT
Relief Valve
Attack Mount
Specifications
Hose Armour
Gear BoxStandard on all Brush Cutt models is a relief valve. Set at 3000 psi this valve disengages the driveline if the hydraulic system pressure is too great protecting both the skidsteer and the Brush Cutt.
The Brush Cutt uses a bevel gearbox capable of handling up to 90HP for fi nal drive output. More durable than conventional direct drive setups these gearboxes prevent shocks from cutting being passed to the drive motor.
The angled skid-steer mount allows the operator to tilt back and lift the front of the Brush Cutt to gain height while attacking higher or denser brush. This keeps the back edge down protecting the skid-steer and operator from debris.
Standard on all Brush Cutt models is Hose Armour. This is a tough wrap which coils around the hoses and protects them from the harsh environment of brush cutting. The armour helps to prevent any punctures from fallen brush or trees.
Model No. CF360 CF372
Recommended GPM Check Motor Options
Maximum Brush Size 2”
Discharge Protection Link Chain Curtain Front and Back
Path Width 70” 82”
Cutting Width 60” 72”
Low Cutting Height 2.5”
Number of Blades 2
Slashes per Second 22
Attachment Type Universal Skid-Steer Plate
Maximum HP Check Flow & PSI on Skid Steer
Minimum Carrier Weight 4000 lbs. 4500 lbs.
System Protection Built In Relief
Shipping Dimensions (LxWxH) 88”x72”x36” 90”x84”x36”
Deck Structure 1/4” steel
Unit Weight 1342 lbs. 1390 lbs.
M450
M550
M650
RPM
GPM
2.5
2
1.5
1
0.5
0
12 20 22 24 25
400 615 700 790
0.75
1.75
2500 PSI
3000 PSI
1.25
1.75
2.25
2 2
1.25
00
M550-Motor
RPM
GPM
2.5
2
1.5
1
0.5
0
12 20 22 24 25
400 615 700 790
0.75
1.75
2500 PSI
3000 PSI
1.25
1.75
2.25
2 2
1.25
00
M550-Motor
RPM
GPM
3.5
3
2.5
2
1.5
1
0.5
024 30 40 41
370 480 615
2500 PSI
3000 PSI32.75
2.52.75
2
1
0
M650-Motor
Motor Options
Hoses/couplers included Hoses/couplers included - case coupler is FM 0.79” size Hoses included, couplers NOT included
New shipping policy, please see last pagebaumalight.com - 1-866-820-7603 U
105
SEE IT IN ACTIONbaumalight.com
BR
US
HC
UTT
Take your property a cut above with the 500 series Brush Cutt Skid Steer models. With two models to choose from, these rugged four-blade machines are ready to tackle brush up to 3” in diameter and can fell trees up to 10” in diameter. The open front design delivers superior operator visibility while the sturdy blade mount, durable platform, and heavy-duty front and rear chain curtains put you confidently in the driver’s seat of your property.
500 Series Skid Steer Models
Deck Strength
A Real Slasher
Two Cuts Per Pass
Chain Curtain
4-Way Model
FEATURES
SKID STEER MODELS
When facing an overgrown property, you have your work cut out for you. The reversible and replaceable 4-blade design of a Brush Cutt is made of long-lasting 1/4” AR400 steel and provides more blade action – doubling the slices per second – which translates into greater cutting power. The 4-way blade configuration can easily handle small trees up to 3” in diameter.*
The curved cutting tips of the slasher blades give the Brush Cutt two cuts per pass of each blade. The leading tip takes a small bite and is immediately followed by the second tip taking another bite. These hungry blades chew into the brush at rates from 26- 52 slashes per second with devastating results.
Taking back your property can be a rough job. We designed and built the deck as a solid platform to take on the task. Built from rugged 1/4 inch steel and then further reinforced with support channels it’s a solid base of operations.
Designed for easy serviceability the 4-way models feature a heavy duty rotor with 4 fixed extensions. Each extension is finished off with a slasher blade this configuration is capable of providing up to 52 slashes per second.
A heavy duty chain curtain reduces discharge of debris. Unlike traditional chain curtains Baumalight’s Brush Cutt utilizes a curtain rod setup that is free of welds. This setup allows the chain to absorb the impacts and places less strain on the welded link for longer curtain life.
baumalight.com - 1-866-820-7603 U106
BR
US
HC
UTT
Relief Valve
Push Bar
Specifications Motor Options
Hose Armour
Gear Box
Shield
Rotor
Standard on all Brush Cutt models is a relief valve. Set at 3,000 psi this valve disengages the driveline if the hydraulic system pressure is too great protecting both the skidsteer and the Brush Cutt.
The Brush Cutt uses a bevel gearbox capable of handling up to 90HP for fi nal drive output. More durable than conventional direct drive setups these gearboxes prevent shocks from cutting being passed to the drive motor.
Push against your overgrown property with the Brush Cutt’s robust push bar. The double arch design of the push bar works to bend the brush forward before cutting and prevent it from falling back after being cut, allowing the blades to chew up taller, stubborn saplings easily from below.
Standard on all Brush Cutt models is Hose Armour. This is a tough wrap which coils around the hoses and protects them from the harsh environment of brush cutting. The armour helps to prevent any punctures from fallen brush or trees.
To protect the output shaft from impact or contamination caused by debris, each model of Brush Cutt is fi nished off with a heavy duty output shaft shield.
Using a 3/4” top plate and a 3/8” bottom plate this heavy duty rotor sandwiches the 4-way blade assembly in place.
Model No. CF560 CF572
Recommended GPM Check Motor Options
Maximum Brush Size 3”
Discharge ProtectionOpen Front with Push Bar
Link Chain Curtain on Back
Path Width 70” 82”
Cutting Width 60” 72”
Low Cutting Height 2.5”
Number of Blades 4
Slashes per Second 52
Attachment Type Universal Skid Steer Plate
Maximum HP Check Flow & PSI on Skid Steer
Minimum Carrier Weight 4500 lbs. 5000 lbs.
System Protection Built In Relief
Dimensions (LxWxH) 88”x72”x36 90”x84”x36”
Deck Structure 1/4” steel
Unit Weight 1540 lbs. 1570 lbs.
M450
M550
M650
RPM
GPM
2.5
2
1.5
1
0.5
0
12 15 18 20 21
420 520 600 650
1 1
0.75
2500 PSI
3000 PSI
1.25 1.25
1.5 1.5
2
0
M450-Motor
RPM
GPM
2.5
2
1.5
1
0.5
0
12 20 22 24 25
400 615 700 790
0.75
1.75
2500 PSI
3000 PSI
1.25
1.75
2.25
2 2
1.25
00
M550-Motor
RPM
GPM
3.5
3
2.5
2
1.5
1
0.5
024 30 40 41
370 480 615
2500 PSI
3000 PSI32.75
2.52.75
2
1
0
M650-Motor
Hoses/couplers included
Hoses/couplers included - case coupler is FM 0.79” size
Hoses included, couplers NOT included
New shipping policy, please see last pagebaumalight.com - 1-866-820-7603 U
107
The massive 1 inch thick steel rotor is impressively
rugged and will remain solid with no flexing to provide the
CSC760 the extra momentum it needs to power through
the thickest brush.
Our industry leading bent axis piston motor makes the
most use of your hydraulic flow and pressure for your
brush clearing needs.
1” THICK STEEL
ROTOR DISC
PISTON MOTORBENT AXIS
FEATURES
SEE IT IN ACTIONbaumalight.com
BR
US
HC
UTT
The 700 series Brush Cutt is a heavy-duty fixed disk rotary brush mower designed for one purpose, to efficiently destroy dense vegetation. Featuring a 1” thick steel rotor, our industry leading bent axis piston motors and the extra bracing of a heavy-duty push bar, the CSC760 delivers the extra momentum to power through dense brush and destroy it.
Disc MulcherSkid Steer Model
baumalight.com - 1-866-820-7603 U108
HEAVY DUTY PUSHER BAR
2” HARDENED WELD-IN HOLDERS ON THE BOTTOM
OPTION TO CHANGE OUT FOR 700 SERIES PLANER TEETH
LARGE BEARING SUPPORT
500 SERIES PLANER TEETH
700 SERIES RIPPER TEETH
With extra bracing to help control the large brush material, the CSC760 model will bend taller brush and destroy it. Bar can be removed for smaller skid steers.
Designed to handle the punishment, these heavy-duty teeth holders resist bending and keep you on the path of destruction longer.
Baumalight gives you the option to change out the ripper teeth for the planer style for a sharper bite with a smoother cut, but these teeth are more vulnerable to damage from rocks. Ripper teeth handle rocks much better, so Planer teeth are only recommended for cutting applications where effi ciency is more important than tooth life.
Carburized alloy steel shafts are standard measuring 2.95” in diameter at the bearings and weighing substantial 104 lbs. Built with high quality double-lip oil seals and using an ISO class external bearing locknut system.
The optional 500 Series planner style teeth provide the most effi cient cutting by smoothly chipping away at the brush. If a fi ner mulch is desired, the 500 Series is a great choice.
Unique to the 700 Series teeth is the Cup and Cone mount, which is machined into the holder and forged into the teeth. Engineered to take all the strain off the mounting bolt and eliminating shearing forces, these carbide teeth are bolted in place.
BR
US
HC
UTT
baumalight.com - 1-866-820-7603 U109
Extra traction from anti-slip strips provides improved
safety as well as ease of entry and exit from the cab.
Avoids jamming by using a 3 stepped plate design. The
area enlargers in the flow of direction so you can concen-
trate on the cut and not worry about bogging down.
Most teeth on the CSC760 can be tightened with an
air impact drill. The bolt-on design allows for the simply
servicing right in the field.
Heavy duty frame with T1 alloy tool steel sheet metal for
all the main areas. Powder coated frame with multiple
anti-slip pads to give you secure footing for ease of entry
and exit from your cab.
STEPPED TOP
ANTI-SLIP STRIP
MULCHING CHAMBER
EASY TIGHTENING
HEAVY DUTY FRAME
BR
US
HC
UTT
baumalight.com - 1-866-820-7603 U110
HOSE SUPPORT ON GREASED PIN
PRESSURE GUAGE
All hoses are sleeved for operator and hose protection. The Connecting hoses are sleeved and wrapped in hose armour for double protection and a pivoting arm with greasable pin keeps the slack out of the way, protecting the hoses from pinching and strain. Ships with double shielded hoses.
Large PSI pressure gauge for maintaining the optimal fl ow that gives you a clear indication of the most effi cient Brush cutting performance.
BR
US
HC
UTT
Model No. CSC744 CSC760
Available Motor OptionsHS430, HS450,
HS490HS790
Recommended GPM Check Motor Options
Maximum Brush Size 10”
Discharge Protection Double chain on back
Path Width 57” 72”
Cutting Width 44” 60”
Low Cutting Height 1/2”
Number of Blades 20 pcs R7000 30 pcs R7000
Slashes per Second 52
Attachment Type Universal Skid-Steer Plate
Maximum HP Check Flow & PSI on Skid Steer
Minimum Carrier Weight 5,500 lb 7000 lbs.
System Protection Built In Hydraulic
Shipping Dimensions (LxWxH) 88”x75”x67”
Deck Structure 1/4” T1 Steel
Unit Weight 2000 lbs. 2850 lbs.
HS430
HS450
HS490
HS790
950 1100 1260870790 RPM
GPM
3.6
4.65.2
5.55.9
0
4.2
5.25.9
6.26.5
0
4.9
5.96.5
6.8 7.3
00
1
2
3
4
5
6
7
25 27 30 35 45 48
CSC760
4000 PSI
3500 PSI
3000 PSI
RPM
GPM
4
3.5
3
2.5
2
1.5
1
0.5
012 15 20 24 25
869 1087 1449 1650
HS430 -Motor
3
1.75
1
0
1.5
2.25
2.75
3.753.754
3
2.252
2.5
3
3.5 3.5
2500 PSI
3000 PSI
3500 PSI
4000 PSI
CSC744
RPM
GPM
5
4.5
4
3.5
3
2.5
2
1.5
018 22 25 30 32
964 1130 1340 1607
HS450 -Motor
3.75
2.25
1.5
0
2.25
3
3.5
4.25
4
4.5
3.5
3
2.75
33.25
3.75 3.75
2500 PSI
3000 PSI
3500 PSI
4000 PSI
CSC744
RPM
GPM
6.5
6
5.5
5
4.5
4
3
2
025 40 45 50 52
789 1262 1420 1577
6
4.5
1.75
0
2.5
3.25
5.5
6.56.25
6.75
5.5
5
3
5
5.5
6 6
2500 PSI
3000 PSI
3500 PSI
4000 PSI
CSC744HS490 -Motor
Specifications Motor Options
Hoses included, couplers NOT included
Hoses included, couplers NOT included
Hoses included, couplers NOT included
Hoses included, couplers NOT included
New shipping policy, please see last pagebaumalight.com - 1-866-820-7603 U
111
BR
US
HC
UTT
Taking the rotary Brush Cutt mower to new heights is the heavy-duty CXC550 model for excavators. Built to help you tackle the stringy dense under growth that gives mowers tangled nightmares, the CXC550’s unique blade design attacks and cuts thick brush, reducing it to mulch. The reversible blades provide good performance before requiring sharpening or replacement. The tri-flail blades chop and mulch all the way to the ground, allowing operators to fell whole trees up to 6” in diameter. Giving bite to the blade is an industry-leading bent axis piston motor, making the best possible use of this rotary mower’s hydraulic flow and pressure.
500 Series Excavator Models
EXCAVATOR MODELS
baumalight.com - 1-866-820-7603 U112
SEE IT IN ACTIONbaumalight.com
A Real SlasherAvailable in 3 blade confi guration the 500 Series Excavator Brush Cutts reversible/replaceable blades are made of long lasting 3/8” AR400 steel. The unique blade design not only provides more cutting surface but also allows the blades to mulch as they cut.The 3-way blade design provides more blade, doubling the slashes per second translating into greater cutting power. The 3-way blade can easily handle small trees up to 6” in diameter.*
BR
US
HC
UTT
Check Excavator mounting options online at baumalight.com
FEATURE
baumalight.com - 1-866-820-7603 U113
BR
US
HC
UTT
10% discount if ordered with a gear motor instead of piston motor.
500 Series Excavator Models
Two Cuts Per Pass
Specifications
3-Way Model
FEATURES
EXCAVATOR MODELS
The curved cutting tips of the slasher blades give the Brush Cutt two cuts per pass of each blade. The leading tip takes a small bite and is immediately followed by the second tip taking another bite. These hungry blades chew into the brush at rates from 150-200 slashes per second with devastating results.
Designed for easy service, the 3-Way models feature a heavy duty 1” rotor with 3 fixed extensions. Each extension is finished off with a slasher blade.
Model No. CXC530 CXC542 CXC550
Motor Options HX508, HX510, HX530 HX530, HX540, HX570 HX530, HX540, HX570, HX590
Recommended GPM Check Motor Options Chart
Maximum Brush Size 3.5” 5” 6”
Discharge Protection Open Front and Back
Path Width 40” 50” 67”
Cutting Width 30” 42” 50”
Low Cutting Height 2.5” 2.5” 2.5”
Number of Blades 3 3 3
Slashes per Second 80 80 90
Attachment Type Bolt-On
Maximum HP Check Flow & PSI on Carrier
Minimum Carrier Weight 2 ton 3 ton 8 ton
Maximum Carrier Weight 10 ton 15 ton 20 ton
Cutting System Protection Hydraulic Relief Valve
Deck Structure 1/4” AR400 steel 1/4” AR400 steel 3/8” AR400 steel
Unit Weight 550 lbs 640 lbs 1,380 lbs
HX508
HX510
HX530
HX540
HX570
HX590
RPM
GPM
3.5
3
2.5
2
1.5
1
0.5
06 8 10 12 14
827 1091 1364 1637
HX508-Motor
2.25
.5
0 0
.5
1.25
1.75
2.52.52.75
1.75
1.25
.75
1.51.75
2.252
2500 PSI
3000 PSI
3500 PSI
4000 PSI
RPM
GPM
4
3.5
3
2.5
2
1.5
1
0.5
012 14 16 18 19
1190 1340 1500 1790
HX510-Motor
2.75
1.75
.75
0
1.5
2.5 2.5
333.25
2.2522 2
2.25
2.752.5
2500 PSI
3000 PSI
3500 PSI
4000 PSI
Motor Options
Hoses/couplers NOT included
Hoses/couplers NOT included
New shipping policy, please see last pagebaumalight.com - 1-866-820-7603 U
-
-
-
--
-
-
-
114
BR
US
HC
UTT
Bent Axis Piston Motor Deck Strength
Large Bearing Support
Blade Mount
Rotor
Our industry leading bent axis piston motor makes the most effi cient use of your hydraulic fl ow and pressure for your brush clearing needs. This motor option requires excavator to be equipped with a case drain.
Carburized alloy steel shafts are standard measuring 2.95” in diameter at the bearings and weighing substantial 104lbs. Built with high quality double-lip oil seals and using an ISO class external bearing locknut system.
Taking back your property can be a rough job. We designed and built the deck as a solid platform to take on the task. Built from rugged 1/4 inch T1 steel and then further reinforced with support channels it’s a solid base of operations.
Featuring a 1” disk, this heavy-duty rotor holds in place the three-way blade assembly.
To secure slasher blades to the blade assembly, Baumalight uses Gr. 8 bolts capped off with castle nuts and cotter pins. The blade mount uses a fully welded collar to drop the blade—this spacing helps to reduce the blade from binding while in operation.
Pack Wing PTO Power Packs
All Excavator Brush Cutt models are available with Baumalight’s Pack Wing, PTO Boom Mower for more carrier versatility.
RPM
GPM
4
3.5
3
2.5
2
1.5
1
0.5
015 18 20 25 26
1075 1300 1450 1800
HX530-Motor
3
2
1
0
1.75
2.75 2.75
3.253.253.5
2.75
2.252.25 2.25
2.75
3 3
2500 PSI
3000 PSI
3500 PSI
4000 PSI
RPM
GPM
0
4
3.5
3
2.5
2
1.5
1
0.5
0
15 18 20 26 27
915 1097 1219 1524 40
2.52.75 2.75 2.75
2.252
2.25
3.52500 PSI
3000 PSI
3500 PSI
4000 PSI
3 3 3
3.25 3.25
1.5 1.5
1
HX540-Motor
RPM
GPM
5
4.5
4
3.5
3
2.5
2
1.5
1
0.5
025 30 35 38 40
1019 1223 1427 1631
2500 PSI
3000 PSI
3500 PSI
2.25
4.254.5
HX570-Motor
3.253
3.25
1
2.25
3.75 3.753.754
0
4000 PSI3.75
4.25
4.755
RPM
GPM
6
5.5
5
4.5
4
3.5
3
2.5
2
1.5
0
30 40 45 52 56
2500 PSI
3000 PSI
3500 PSI
4000 PSI
4.5
4.75
5.25
4
6
2.75 2.75
3.5
4.5
3.75
0
HX590-Motor
3.5
1.75
2.5
3.5
2
1.5
946 1262 1420 1577
Hoses/couplers NOT included
Hoses/couplers NOT included
Hoses/couplers NOT included
Hoses/couplers NOT included
Available on
New shipping policy, please see last page
Find your closest dealer online
baumalight.com - 1-866-820-7603 U115