Download - BOMBARDING OF MATERIALS WITH EXPLOSION-ACCELERATED PARTICLES: EVALUATION OF DEVELOPED PRESSURES
BOMBARDING OF MATERIALS WITH
EXPLOSION-ACCELERATED PARTICLES:
EVALUATION OF DEVELOPED
PRESSURES
E.V. Petrov1, R.G. Kirsanov2, and A.L. Krivchenko3
1 Institute of Structural Macrokinetics and Materials Science, Russian Academy of Sciences, Chernogolovka 2 Samara State Agricultural Academy, Ust-Kinelskii 3 Samara State Technical University, Samara
Objects of research2
Cylinders h=40 mm, ø 24 mm material-(steel – U8)
TiN – powder (tmel=2947 0С, ρ=5,44 g/сm3),
particles size 45 – 57 μm (74%), used as the main material for
practical purposes.
Histogram of particles TiN
W powder (tmel=3380 0С, ρ=19,3 g/сm3),
particles size 13 – 16 μm (55%), used as model
material
Histogram of particles W
3
Scheme of experiment
1 − detonator, 2 − explosive, 3 – air clearance, 4 – steel tube, 5 – ring, 6 – powder particles, 7 – sample (steel U8).
Investigations of the microhardness distribution at the depth of 4 mm, steel U8
sample height is 40 mm
The increase of the samples hardness :900 – by powder particles by 26 %900 – by shock wave by 16 %600 – by powder particles by 38 %600 – by shock wave by 28 %450 – by powder particles by 32 %450 – by shock wave by 22 %
Collision angle - 900
4
Collision angle - 600
Collision angle - 450
Cross-section of the sample
X-ray spectral microanalysis (LEO-1450)The sample treated by TiN powder
5
TiN particles into the sample, depth ~ 2 мм, collision
angle – 600
Spectrum C Ti N Fe
1 23.45 5.36 23.19 48.00
2 24.63 11.01 25.84 38.52
Microanalysis of TiN particles (atomic%)
Near-surface layer of obstacle,
collision angle – 900
Penetration depth of TiN particles is about 2,1 – 2,3 mm that much more than initial particles size (60 μm), in 38 times
Element App. Conc.
Weight
%
Atomic %
C 3,99 8,54 45,77
Fe 27,19 25,92 29,90
W1 52,55 65,82 20,57
WS1 58,04 69,47 24,33
The sample treated by W powder, collision angle is 900
6
W particles into the sample:3 mm 0,126 mm
Microanalysis W particles
Near-surfacelayer of obstacle
Penetration depth of W particles is about 126 μm that much more than initial particles size (14 μm ), in 9 times
X-ray spectral microanalysis (LEO-1450)
7
1. Experimental evaluation of pressure, with using electret polivinildihlorid transducer gave us values of 1-2 GPa (Aleksentseva S.E., Kalashnikov V.V., Krivchenko A.L., Tsivinskaya L.V., Interaction of Accelerated Particles with Metals, Abstr. Symp. on Synergism, Materials Structure, and Self-Assembling Technologies, Moscow, 1996, pp. 24–25. )
2. To value the interaction parameters between particle flow( we study it as porous body) and steel sample we use the methodology agreed impedances. It’s shown:
• when the porosity (m) = 3,9 the incoming shock wave pressure (P) in steel = 34 GPa
• when the porosity (m) = 4,5 then P = 25 Gpa• when the porosity (m) = 8 (the porosity of W particle flow in
the experiment, ) then P = 10-13 GPa. (Kirsanov R.G. The study of the kinetics of the processes, changes in the structure and properties of metals under shock-wave action flux of discrete particles in the mode of super-deephpenetration: dissertation Candidate of Physical Mathematical Sciences: 01.04.07. / Samara, 1997. – 139 p.
Estimated value of pressure in the collision flow of particles W and TiN with a steel sample
Estimated value of pressure in the collision flow of particles W and TiN with a steel sample
Conservation equation of impulse
DUP 0
bUaD
where ρ0 – density; D – speed of the shock jump; U – the mass velocity.
WbWaP FeFe WUWUbaP TiNWTiNW ,,
where a and b – coefficients;For steel: а= 3800 m/s, b= 1,58For W: а= 4010 m/s, b= 1,24For TiN: а= 6280 m/s, b= 1,154
Numerical estimate:for W: Р = 62 GPa; for TiN: Р = 41 GPa.
Linear equation of the shock adiabat
UbUaP 0
8
It is shown that interaction of the explosion-accelerated particle flow with the obstacle is accompanied by three types of interaction:1.The relatively weak interaction of detonation products flow with the material of obstacles. Pressure in obstacle does not exceed the pressure of the elastic precursor - 1 GPa.2.More stronger interaction of the particle flow with the material of obstacles. Pressure on whole of sample surface - 10-13 Gpa (calculated by the reflection of shock adiabats).3.Locally strong interaction of the one particle with obstacle surface. In this case, pressure for W particles = 62 Gpa, TiN particles = 41 GPa (calculated from the equations of the shock adiabats).
Сonclusions:9
Thank you for attention
10