Frequency response20Hz to 20kHz: +0/-0.5dBCrosstalk< -95dB, 20Hz to 20kHz
Front Panel Attributes:Standby buttonStandby on/off
Channel 1 and 2 input metersDisplays the individual input levels ofChannels 1 and 2. The meter range is:O (overload red LED), 0, -6, -12, -18,-24 and, -40dB (green LEDs).Display2 x 16 backlit LCD display
Arrow up/arrow downPress to navigate up or down throughthe user interface
Preset key (green LED)Press to enter preset mode
Delay key (green LED)Press to edit the delay parametersUtility key (green LED)Press to edit routing, level, andsystem parametersLimiter key (green LED)Press to edit the limiter parameters
Rotary encoderSelects presets and edits values
Environment:Operating temperature32˚F to 122˚F (0˚C to 50˚C)
Storage temperature-22˚F to 167˚F (-30˚C to 70˚C)
HumidityMaximum 90% non-condensing
PANARAY® SystemDigital Controller
General Description
The Bose® PANARAY System DigitalController utilizes digital signalprocessing (DSP) architecture toprovide smooth, accurate spectralresponse for any Bose professionalloudspeaker product requiring activeequalization (EQ) or additionalprocessing.Any Bose professional loudspeakerEQ can be accessed by simplyselecting the appropriate preset andconfiguration. No programming isrequired.
The controller has two balanced XLRanalog inputs and four balancedXLR outputs. It can be configured torun two mono Bose EQ presets or asingle stereo Bose EQ preset(including preset crossover settings).
In addition to providing Bosespeaker EQ presets, the controlleralso has the following easy-to-useprogrammable features:• Four independent signal delays
(200 ms per output) which can beused for decentralized or distrib-uted speaker alignment and forcreating custom bass arrays.
• Four independent output limitersthat can be set to protect speak-ers from unpredictable spikes inprogram material.
• A programmable signal routerwhich allows each output to selectfull-range and high- or low-passcombinations of input signals.
Sample Rate44.1kHz
Analog Inputs:Connectors(2) XLR balanced
Impedance balanced21kΩInput levelMaximum: +18dBuMinimum: 0dBu
Sensitivity@9dB headroom: -12dBu to +9dBuA to D conversion24 bit, 128 x oversampling bitstream
Dynamic range95dB typ, 20Hz - 20kHz
THDTyp < 92dB (0.0025%) @ 1kHzFrequency response20Hz to 20kHz, +0/-0.1dB
Crosstalk< -100dB, 20Hz to 20kHz
Analog Outputs:Connectors(4) XLR balancedImpedance balanced40ΩMaximum output level+18dBu (balanced)
Output rangesBalanced 20/14/8/2dBuD to A conversion24 bit, 128 x oversampling bitstream
D to A Delay0.63ms @ 44.1kHz
Dynamic range100dB typ 20Hz - 20kHzTHDTyp < 94dB (0.002%) @ 1kHz +20dBuoutput
Technical Information
Technical Information(cont.)
Control interface:
FinishBlack anodized aluminum front-platedand painted steel chassisMains voltage100 to 240VAC, 50Hz to 60Hz (autoswitching)Power consumption< 15W
Bose Corporation, Framingham, MA 01701-9168Made in the U.S.A.
OUTPUTSINPUTS
CH1 CH2 CH3 CH4CH2CH1/MONO
100-240V~AC50-60Hz
300W MAX
RISQUE DE CHOC NE PAS
RISK OF ELECTRICAL DO NOT
POWER
COM
Figure 1: Portable System: Stereo Configuration
Figure 2: Portable System: Stereo with Endfire Bass Array
PANARAY® System Digital Controller configuration: Stereo operation using PANARAY 802®-IIIspeakers:
Controller Inputs
PANARAY System Digital Controller configuration: Stereo operation using PANARAY 802-IIIspeakers and an MB4 2x Endfire bass array:
Controller Inputs
Bose Corporation, Framingham, MA 01701-9168Made in the U.S.A.
OUTPUTSINPUTS
CH1 CH2 CH3 CH4CH2CH1/MONO
100-240V~AC50-60Hz
300W MAX
RISQUE DE CHOC NE PAS
RISK OF ELECTRICAL DO NOT
POWER
COM
802-III speakerLeft main
802-III speakerRight main
802-III speakerRight main
802-III speakerLeft main
Controller Configuration
Controller Configuration
MB4 2xEndfirebass array
Left Right
Controller Outputs
Controller Outputs
1hC reximmorftfeL
2hC reximmorfthgiR
Frommixer
Left Right
Frommixer
1hC reximmorftfeL
2hC reximmorfthgiR
1hC 2hC 3hC 4hC
gnituoR III-208rekaepsniamtfeL
III-208rekaeps
niamthgiR
A/N A/N
retimiL nO nO A/N A/N
yaleD ffO ffO A/N A/N
rekaepsegnarlluFIII-208
htiwrekaepsIII-208yarrassaberifdnEx24BM
1hC 2hC 3hC 4hC
gnituoR III-208rekaepsniamtfeL
III-208rekaeps
niamthgiR
rekaeps4BM)onom(
rekaeps4BM)onom(
retimiL nO nO nO nO
yaleD ffO ffO ffO nO
Figure 3: Engineered System Configuration (Medium Church)
Figure 4: Engineered System Configuration (Small Church)
PANARAY® System Digital Controller configuration: Mono operation using PANARAY 502A®, 302A®,and MB4 speakers:
Controller Inputs
PANARAY System Digital Controller configuration: Mono operation using PANARAY LT9702® speakerwith MB4 speakers:
Controller Inputs
Bose Corporation, Framingham, MA 01701-9168Made in the U.S.A.
OUTPUTSINPUTS
CH1 CH2 CH3 CH4CH2CH1/MONO
100-240V~AC50-60Hz
300W MAX
RISQUE DE CHOC NE PAS
RISK OF ELECTRICAL DO NOT
POWER
COM
Bose Corporation, Framingham, MA 01701-9168Made in the U.S.A.
OUTPUTSINPUTS
CH1 CH2 CH3 CH4CH2CH1/MONO
100-240V~AC50-60Hz
300W MAX
RISQUE DE CHOC NE PAS
RISK OF ELECTRICAL DO NOT
POWER
COM
®®
MB4speakers
302A speakerBalcony(delayed,with no EQ)
502A speakerMains
MB4speakers
LT9702 speakerMains
Controller Configuration
Controller Configuration
Controller Outputs
Controller Outputs
1hC reximmorfonoM
2hC tupnioN
1hC reximmorfonoM
2hC tupnioN
Mono frommixer
MB4speakers
Mono frommixer
1hC 2hC 3hC 4hC
gnituoR rekaepsA205sniaM
4BM rekaepsA203ynoclaB)QEon(
A/N
retimiL nO nO nO A/N
yaleD ffO ffO sm3 A/N
1hC 2hC 3hC 4hC
gnituoR 2079TLrekaeps
sniaM
4BM 4BM A/N
retimiL nO nO A/N A/N
yaleD ffO ffO A/N A/N
rekaeps4BMhtiwrekaepsA205
rekaeps4BMhtiwrekaeps2079TL
Engineers’ and Architects’Specifications
All versions of the Bose PANARAYSystem Digital Controller are cov-ered by a 1-year, transferablelimited warranty.
Safety and RegulatoryCompliance
All versions of the Bose PANARAYSystem Digital Controller complywith the following:IEC 65, EN 60065, UL6500, andCSA E65
Europe:EMC; EN-55103-1; EN-55103-2
USA:
FCC Part 15; Subpart B; Class BCanada:
ICES-003 Class B
Australia/New Zealand:AS/NZS 1053
Japan:
CISPR-13/22
©2001 Bose Corporation, The MountainFramingham, MA 01701-9168www.bose.com261282 AM Rev.00 PC028148 JN20370
The controller shall use a digitalsignal processing architecturerunning at a 44.1kHz sample rate.The frequency response shall befrom 20Hz to 20kHz (+0/-0.1dB). Thedynamic range shall be 95dB typical20Hz to 20kHz.
The controller shall include a singleanalog XLR balanced input connec-tor for each of the two input chan-nels. It shall have a single analogXLR balanced output for each of itsfour outputs. The Maximum InputLevel shall be +18dBu (balanced).The Maximum Output Level shall be+18dBu (balanced). The input imped-ance shall be 21k ohms for balancedoperation. The throughput delay timethrough the controller shall be0.63ms.Crosstalk shall be <-95dB, 20Hz to20kHz. The THD shall be <92dBtypical at 1kHz.
A 5-pin din connector COM port shallbe used for software updates.
The power supply shall be autoswitching from 100 to 240 VAC, 50 to60 Hz. Power consumption shall be<15W.
Warranty InformationInstallation
The Bose® PANARAY® System DigitalController installer’s guide is includedin the product packaging.
8
1 2
7 10
3 4
9
65
1
2
3
4
6
5Standby button
Input meters
LCD display
Arrow up/arrow down
10
9
7
8
Preset, Utility, Limiter, DelaybuttonsRotary encoder
Inputs CH1 and CH2
Outputs CH1, CH2, CH3, CH4
COM port
Power