Download - Branding and Marking Manual - TDEA
2
October 2017
The Ambassador’s Fund Grant Program is being implemented with support from the American People through
the U.S. Agency for International Development (USAID). The contents of this report are the responsibility of
the Trust for Democratic Education and Accountability (TDEA), and do not necessarily reflect the views of
USAID or the U.S. Government.
3
Grant Partner Branding and Marking Manual
This manual set out the standards and gives guidance to the grant partners of the USAID Ambassador’s
Fund Grant Program. The guidelines set out in this manual are compulsory for all grant partners of
the Ambassador’s Fund Grant Program. These guidelines are in accordance with the USAID
Automated Directive Systems (ADS) 320.
I. Standard Graphic Identity
The following Standard Graphic Identity of USAID is to be used by the grant partners of the
Ambassador’s Fund Grant Program to mark all program / project activities and public communications.
See samples at https://www.usaid.gov/branding/translated-brandmarks/country-brand-region#afgpak.
English:
Urdu:
2. Approvals
All grant partners of the USAID Ambassador’s Fund Grant Program are required to seek prior
approvals from the Ambassador’s Fund Grant Program Communications and Media unit for all
programmatic communications materials, which include but are not limited to, advertisements, press
releases, fact sheets, brochures, backdrops and banners, plaques, flyers, posters, media campaigns, and
any promotional materials, etc.
3. Social Media
The grant partner may use social media as a tool for outreach and promotion of project activities,
including their existing platforms, the USAID/Pakistan platforms, or both. The grant partner may
develop a project page on any social media platform like Facebook and may display the USAID logo.
The presence of the disclaimer on the page in a clearly visible position is necessary. On any such page,
the grant partner must mention that the project being implemented is funded by the United States
Agency for International Development (USAID) under its Ambassador’s Fund Grant Program.
4
4. Branding and Marking Guidelines
For all materials, printed and electronic matter (such as publications, public project communications,
banners and other signs, plaques, certificates, promotional products, etc.) designed and developed by
the grant partner to be used for the promotion and to increase visibility of the project among its
target audience, the grant partner will use the guidance set forth in this Branding and Marking Manual.
This includes the use of the USAID Identity and the U.S. flag, as well as color scheme, design and
typeface for all project materials.
4.1. Administrative
All administrative materials – which include, but are not limited to business cards, letterheads, official
vehicles, project office premises, employment contracts, job advertisement, fax communications,
administrative forms, procurement documents, sub-grantee administrative correspondence, etc. –
may not be marked with the USAID Identity and/or the USAID Ambassador’s Fund Grant Program
identity in any manner.
The grant partner in all official administrative correspondence may, if necessary, add a brief
introduction stating that the project is funded by the United States Agency for International
Development (USAID) under its Ambassador’s Fund Grant Program.
4.2. Programmatic
4.2.1. Project Deliverables and Public Communications Relevant project deliverables and public communications materials include, but are not limited
to research and promotional materials produced under the project, including studies, reports,
papers, websites, Public Service Announcements (PSAs), audio-visual productions, and other
promotional, informational, media or communications products funded by the USAID
Ambassador’s Fund Grant Program.
Materials produced for events under the project might include banners, press releases,
certificates and printed materials for training sessions, conferences, seminars, workshops,
press conferences, and other public activities.
4.2.2. Program Materials Program materials are communications that target beneficiaries with specific messages, such
as “Protect Pakistan’s diverse languages” or “Be prepared for natural disasters.” They often
use cartoons, illustrations, or other graphic techniques to simplify communications.
All program materials need to be branded and marked with the USAID Identity to
acknowledge the U.S. Government’s support and funding.
5
4.3. Project Name and Use of Acronyms The Ambassador’s Fund Grant Program should always be referred to as the USAID Ambassador’s
Fund Grant Program. The acronym AFGP may be used in addition to the full name for any project
related materials used by grant partners, including internal and external communication.
The grant partner also may use the full name and acronym for the United States Agency for
International Development (USAID) and its own project / organization name.
4.4. USAID Graphic Identity Guidelines The USAID Standard Graphic Identity (Identity) is an official U.S. Government symbol, and any
alteration, distortion, re-creation, translation (other than the tagline), or misuse is strictly prohibited.
The Identity includes both the logo and brandmark. It is to be used on all Agency communications.
On rare occasions, size, shape, space, or visibility may dictate the use of just the logo or brandmark
on certain visual media.
The USAID Identity is only to be arranged in the two formats – vertical and horizontal – shown on
these pages. It may not appear on the same page of a document or on-screen presentation in any
other arrangement. A number of digital file formats are available at www.usaid.gov/branding.
6
FULL-COLOR IDENTITY, TWO-COLOR IDENTITY, BLACK-ONLY IDENTITY,
HORIZONTAL HORIZONTAL HORIZONTAL
LOGO: LOGO: LOGO:
Circles, Agency name, USAID, Circles, Agency name, USAID, All: 100% Process Black
Stars: USAID Blue Stars: USAID Blue BRANDMARK:
Bars: USAID Red Bars: USAID Red US and tagline: 100%
Handclasp: 100% Black Handclasp: 100% Black Process Black
BRANDMARK: BRANDMARK:
US and tagline: USAID Blue US, tagline: USAID Blue
AID: USAID Red AID: USAID Red
MINIMUM PRINT IDENTITY SIZE
A minimum size has been established for the standard Graphic Identity to ensure legibility. This
size is only intended to be used for business cards. For translation of the tagline into local language,
a comparable but legible minimum size must be created.
Minimum height of horizontal Identity = 10 MM
Minimum width of horizontal Identity = 34 MM
7
MINIMUM ON-SCREEN IDENTITY SIZE
An absolute minimum size has been established for the USAID Identity to ensure legibility in all
on-screen applications.
Minimum height of on-screen horizontal
Identity = 70 pixels
Minimum width of on-screen horizontal
Identity = 238 pixels
FIXED PROPORTIONS
To accurately reproduce the USAID Identity, the logo and brandmark must be scaled and placed
in relation to each other exactly as shown here.
H = Height of USAID name and tagline
W = Width of USAID in logo
MINIMUM IDENTITY CLEAR SPACE
A minimum area within and surrounding the Identity must be kept clear of any other typography
as well as graphic elements such as photographs, illustrations, thematic images and patterns, and
the trim edge of a printed piece. More than the minimum clear space is encouraged if applications
provide the opportunity.
Minimum clear space on all sides is equal to
height of the name, regardless of the
language of the tagline. Within the
rectangle so described, the entire area is
clear space.
H = Height of brand name
W = Width of brand name
8
MINIMUM ON-SCREEN LOGO SIZE
An absolute minimum size has been An absolute minimum size has been
established for the logo to ensure established for the logo to ensure legibility
legibility in print applications. in on-screen applications.
Minimum height of printed logo = 12 MM Minimum height of printed logo = 70 pixels
Minimum width of printed logo = 12MM Minimum width of printed logo = 70 pixels
4.5. Identity with Translated Taglines US and tagline: USAID Blue
AID: USAID Red
USAID must remain in English at all times. The tagline may be translated into local
languages. The tagline should be translated into local languages without altering its meaning or
message. For consistency, there should be one standard translation for each language. The local-
language tagline should be set in a typeface that matches the brandmark as closely as possible. The
standard USAID Identity with Urdu tagline which may be used is as follows:
4.6. Correct Identity Usage When used on co-branded materials, program materials, or other items, it may be necessary to print
the USAID Identity on a color background. It is never acceptable to change the colors of the Identity,
but the Identity may be overprinted on light shades of color that do not make it illegible. Below are
some examples of how the Identity may be used correctly, when displayed on a color background.
The reasons the examples below are correct are: The clear space is observed; the color combinations
are correct; the minimum size is observed; and the color background is white.
9
4.7. Incorrect Identity Usage The only correct use of the USAID Identity is as shown on the previous pages, as horizontal Identity
and vertical Identity. Any other color combination or arrangement is not allowed. The logo and
brandmark may never be broken apart when used on the same page of any printed or on-screen
communication. A few incorrect examples are shown below.
10
4.8. Placement
AGENCY PUBLICATIONS CO-BRANDED PUBLICATIONS PROGRAM MATERIALS
Identity must be placed in upper Request lower-left placement on Place Identity where
left area, in a white field, on all co-branded communications appropriate; lower left
Agency-funded communications; placement is preferred.
horizontal grid must be used. Identity must be of equal size Identity must be of equal
and prominence with all others. size and prominence with
all others.
4.9. Color Palette USAID has standards for reproducing colors so they will always look consistent, no matter where
they appear. For example, the brandmark and logo should be reproduced in full color – USAID Blue,
USAID Red, and Solid Black – whenever possible.
These colors should be employed throughout any communications and are equivalent to the
PANTONE® numbers listed in the table below. For four-color process printing, refer to the CMYK
values shown. For desktop publishing, such as Microsoft ® Word or Microsoft PowerPoint ®, refer to
RGB (print/onscreen). For Web applications, refer to the RGB Web values or Hexadecimal Web
values.
The PANTONE and CMYK values provided can be used on both coated and uncoated paper when
printing. Although variations in color will occur, try to match the colors as closely as possible. For
applications in color systems not included here, use the PANTONE values for color matching. (See
the next page.)
11
4.10. Font One primary font, namely Gill Sans, is to be used for all printed publications:
Arial font may be used when the Gill Sans font family is not available.
12
4.11. Disclaimer All studies, reports, publications, project related web site/web page, and all information and
promotional products by the grant partner will contain the following provision:
English Disclaimer:
Month Year (e.g., August 2013) [Note: Use the current date for all materials.]
This report was made possible with support from the American people through the U.S. Agency for
International Development (USAID). The contents are the sole responsibility of the (Organization /
Partner Name) and do not necessarily reflect the opinion of U.S. Agency for International
Development or the U.S. Government.
Urdu Disclaimer:
4.12. Brand Applications The Standard Graphic Identity of the USAID Ambassador’s Fund Grant Program should be applied to
a variety of printed or manufactured materials and on-screen communications. Size, shape, or visibility
may necessitate using the logo or brandmark alone. The guidelines shown earlier in this manual must
be followed without exception. Following are some examples of applications that may be branded.
4.12.1. Publications All grant partners must ensure that project publications – and other designed communications
such as newsletters, exhibits, and posters – use the Standard Graphic Identity as well as the
color palette and typography.
13
4.12.2. Event Materials Events materials may include, but are not limited to banners, folders, invitations, award
certificates, note cards, etc.
Banners should be used to brand an event. Banners may be used to detail the event.
Banners may also be used to acknowledge partners, etc.
Note regarding the samples below that USAID is no longer using the blue strip
with Roshan Pakistan featured below. The new slogan is “Together We Can.”
Additional guidance will be provided to grant partners.
(NOTE: The outline / border on both images above are only to allow separation
of images from the document. Do not use any borders / outlines for any event
materials, including banners, posters, etc.)
14
4.12.3. Promotional Materials The Standard Graphic Identity, logo or brand mark may be placed on promotional items; size,
shape, space, and visibility will dictate which to use. Color and clear space specifications must
be followed at all times.
4.12.4. DVD and CD Covers DVD and CD covers should contain the USAID Identity in the upper left, contained in a white
field with or one or two bars tall.
4.13. Imagery Imagery is an integral and vital part of USAID communications. Visual Imagery – specifically
photography – conveys the spirit and energy of our efforts. One powerful, relevant photograph might
be used to attract attention on the product, as the examples here show:
(NOTE: The outline / border on both images above are only to allow separation of
images from the document. Do not use any borders / outlines for any promotional
materials, etc.)
Since imagery will be used in applications from print to the web, we must ensure that it consistently
captures the best of our work and showcases our success. Following our guidelines will ensure that
our communications have a recognizable look.
When preparing or selecting imagery, keep in mind these guidelines:
Focus on positive aspects of project efforts.
Demonstrate “aid in action.”
Ensure relevancy to the story.
15
Include “who, what, when, where, and why” of photos in captions.
Credit the photographer.
Show people looking at the camera, whenever possible, to connect emotionally with the
reader.
Select images that are in focus and that are colorful and bright.
Use high resolution photos only.
Although using imagery to support your message is strongly recommended, using an image that is
unclear, both in terms of quality or subject matter, may hamper the clarity of your message and cause
harm to the USAID brand. If no high-quality, clear and powerful image is available, it may be better to
create a design that is built around typographic treatments, rather than a layout that relies on
photography.
Correct Image Usage:
Show positive benefits
Focus on success
Establish the quality of assistance
Demonstrate personal impact
Show the brand in context
Incorrect Image Usage:
Avoid stagnant shots of buildings
Avoid duotone photos and images that showcase despair
Avoid photos in which the activity is unclear, no emotion is displayed, or the individuals
pictured are merely standing in front of a sign.
4.14. Video
Branding of project videos by sub-grantees will reflect the updated USAID guidance on videos,
including the usage of a “bumper” at the end, which will be provided by the USAID/Pakistan
Development Outreach and Communication representative. See the USAID Video and Photography
Style Guide for more information at https://www.usaid.gov/branding/resources and
https://www.usaid.gov/sites/default/files/documents/1869/USAID%20Shooting%20Guide.pdf.
16
5. Templates
A series of mandatory communications templates is being developed for common items such as press
releases and folders. These and other templates will be available in Microsoft Word file format for
download from the Ambassador’s Fund Grant Program webpage. NOTE: Most of the examples
below are for the USAID Citizens’ Voice Project and will be adapted for the USAID
Ambassador’s Fund Grant Program and for AFGP grant partners.
5.1. Report Cover
(NOTE: The outline / border on the images above are only to allow separation of
images from the document. Do not use any borders / outlines for any report cover,
etc.)
17
5.2. Press Release
NOTE: Press Releases sent to the media by a grant partner can only have the
partner organization logo, not the USAID Identity or U.S. flag. The AFGP will amend the sample below and provide additional guidance to grant partners.
(NOTE: The outline / border on the image above is only to allow separation of the
image from the document. Do not use any borders / outlines for any press release,
etc.)
18
5.3. Fact Sheet
(NOTE: The outline / border on the image above is only to allow separation of the
image from the document. Do not use any borders / outlines for any fact sheet, etc.)
19
5.4. Success Story
(NOTE: The outline / border on the image above is only to allow separation of the
image from the document. Do not use any borders / outlines for any success story,
etc.)
20
5.5. Certificate
5.6. PowerPoint Presentation
(NOTE: The outline / border on all images above are only to allow separation of the
images from the document. Do not use any borders / outlines for any certificate,
PowerPoint presentation, etc.)