GENERAL“AE” range of 2-way (Fig.200 and Fig.210) and 4-way (Fig.220 and Fig.230) breeching inlet cabinets are generally fabricated from electro-galvanised steel material. Aluminium or stainless steel materials are available upon request.
The breeching inlet cabinets are manufactured strictly in accordance with BS 5041 : Part 5 : 1974.
The door hinges are either riveted or welded to the cabinet and swings out 180 degree from left to right. The cabinet comes with a standard springlock and 6mm thick wire glass. The wordings on the glass vary according to the fire protection systems in which the breeching inlet is installed, eg. DRY RISER INLET, WET RISER INLET, SPRINKLER BREECHING INLET, FOAM INLET, etc.
The rear of the cabinet panel has the cut-out holes for easy installa-tion of the breeching inlet to the pipework.
The quality of workmanship and its’ finishes are carefully planned and executed from the initial stage of preparing the material and fabricating up to the painting process.
The standard finishes of the electro-galvanised steel and aluminium cabinets are “Red” epoxy/polyester powder coated and oven baked. Stainless steel cabinets come with 4B quality finishes.
FEATURES• Compact and elegant design.• Quality finishes in epoxy/polyester powder coated and
oven baked.• Easy installation with pre-cut flange holes at the rear panel.
Fig.200
Fig.230
Fig.210
Fig.220
BREECHING INLET CABINET
Fig.200
Fig.220
“Surface” Type Breeching Inlet Cabinet
FRONT ELEVATION SECTION VIEW REAR VIEW
395mm
20mm
20mm
595mm
Springlock
6mm wire glass
295mm
370mm
25mm
100mm cut-out hole
8 nos x 22mm bolt holes
185m
m
185m
m
240mm 355mm
PCD = 180mm dia
595mm
20mm
595mm
Springlock
6mm wire glass
20mm
150mm cut-out hole
8 nos x 22mm bolt holes
255m
m
315m
m
255mm 340mm
PCD = 240mm dia
295mm
570mm
25mm
Fig.210
Fig.230
“Recessed” Type Breeching Inlet Cabinet
FRONT ELEVATION SECTION VIEW REAR VIEW
100mm cut-out hole
8 nos x 22mm bolt holes
185m
m
185m
m
240mm 355mm
PCD = 180mm dia
395mm
38mm
38mm
38mm 38mm 595mm
Springlock
6mm wire glass
295mm
370mm
25mm
595mm
38mm
38mm 38mm
38mm
595mm
Springlock
6mm wire glass
150mm cut-out hole
8 nos x 22mm bolt holes
255m
m
315m
m
255mm 340mm
PCD = 240mm dia
295mm
570mm
25mm
* All dimensions shown are in millimetres.
* Due to the improvement in the design and standard, we reserve the right to change the specifications without prior notice.
BREECHING INLET CABINET