BRITISH STANDARDS
BS 434:-
Bitumen road emulsions
BS 434-2:2006
Code of practice for the use of
cationic bitumen emulsions on
roads and other paved areas
supersedes BS 434-2:1984
ISBN 0 580 49879 4
£56.00 members, £112.00
non-membersB/510
BS 2000:-
Methods of test for petroleum and
its products
BS 2000-391:-
Determination of aromatic
hydrocarbon types in middle
distillates. High performance liquid
chromatography method with
refractive index detection
BS 4592:-
Industrial type flooring and stair
treads
BS 4592-0:2006
Common design requirements and
recommendations for installation
supersedes BS 4592 Parts 1-5
ISBN 0 580 48253 7
£49.00 members, £98.00
non-membersB/208/1
BS 4592-1:2006
Metal open bar gratings.
Specification
supersedes BS 4592-1:1995
ISBN 0 580 48254 5
£34.00 members, £68.00
non-membersB/208/1
BS 4592-2:2006
Expanded metal gratings.
Specification
supersedes BS 4592-2:1987
ISBN 0 580 48255 3
£34.00 members, £68.00
non-membersB/208/1
BS 4592-3:2006
Cold formed metal planks.
Specification
supersedes BS 4592-3:1987
ISBN 0 580 48256 1
£34.00 members, £68.00
non-membersB/208/1
BS 4592-4:2006
Glass reinforced plastics (GRP)
open bar gratings. Specification
supersedes BS 4592-4:1992
ISBN 0 580 48257 X
£34.00 members, £68.00
non-membersB/208/1
BS 4592-5:2006
Solid plates in metal and glass
reinforced plastics (GRP).
Specification
supersedes BS 4592-5:1995
ISBN 0 580 48258 8
£34.00 members, £68.00
non-membersB/208/1
BS 5391:-
Acrylonitrile-butadiene-styrene
(ABS) pressure pipe
BS 5391-1:2006
Specification
supersedes BS 5391-1:1976
ISBN 0 580 49182 X
£49.00 members, £98.00
non-membersPRI/88/2/P4
BS 5392:-
Acrylonitrile-butadiene-styrene
(ABS) fittings for use with ABS
pressure pipe
BS 5392-1:2006
Specification
supersedes BS 5392-1:1976
ISBN 0 580 49183 8
£34.00 members, £68.00
non-membersPRI/88/2
BS 6068:-
Water quality
BS 6068-2.99:-
Physical, chemical and
biochemical methods.
Determination of selected
polybrominated diphenyl ethers in
sediment and sewage sludge.
Method using extraction and gas
chromatography/mass
spectrometry
BS 6068-5.45:-
Biological methods. Evaluation of
genotoxicity by measurement of
the induction of micronuclei. Mixed
population method using the cell
line V79
BS 6700:2006
Design, installation, testing and
maintenance of services supplying
water for domestic use within
buildings and their curtilages.
Specification
supersedes BS 6700:1997
ISBN 0 580 49786 0
£90.00 members, £180.00
non-membersB/504/2
Page 1 of 71BRITISH STANDARDS
BS 7270:2006
Metallic materials. Constant
amplitude strain controlled axial
fatigue. Method of test
supersedes BS 7270:1990
ISBN 0 580 49023 8
£49.00 members, £98.00
non-membersISE/NFE/4/6
BS 8468:-
Respiratory protective devices for
use against chemical, biological,
radiological and nuclear (CBRN)
agents
BS 8468-2:2006
Negative pressure, air purifying
devices with full face mask.
Specification
no current standard is superseded
ISBN 0 580 49762 3
£64.00 members, £128.00
non-membersPH/4
BS EN PUBLICATIONS
BS EN ISO 105:-
Textiles. Tests for colour fastness
BS EN ISO 105-C12:2006
Colour fastness to industrial
laundering
no current standard is superseded
ISBN 0 580 49818 2
£34.00 members, £68.00
non-membersTCI/81
BS EN ISO 140:-
Acoustics. Measurement of sound
insulation in buildings and of
building elements
BS EN ISO 140-18:2006
Laboratory measurement of sound
generated by rainfall on building
elements
no current standard is superseded
ISBN 0 580 49831 X
£49.00 members, £98.00
non-membersEH/1/6
BS EN 284:2006
Swap bodies. Non-stackable swap
bodies of class C. Dimensions and
general requirements
supersedes BS EN 284:1992
ISBN 978 058049902 9
£49.00 members, £98.00
non-membersTW/1
BS EN 415:-
Safety of packaging machines
BS EN 415-6:2006
Pallet wrapping machines
no current standard is superseded
ISBN 978 058049933 3
£74.00 members, £148.00
non-membersMCE/3/3
BS EN 541:2006
Aluminium and aluminium alloys.
Rolled products for cans, closures
and lids. Specifications
supersedes BS EN 541:1995
ISBN 978 058049934 0
£49.00 members, £98.00
non-membersNFE/35
BS EN 545:2006
Ductile iron pipes, fittings,
accessories and their joints for
water pipelines. Requirements and
test methods
supersedes BS EN 545:2002
ISBN 0 580 49821 2
£74.00 members, £148.00
non-membersPSE/10
DD CEN/TS 1071:-
Advanced technical ceramics.
Methods of test for ceramic
coatings
DD CEN/TS 1071-11:2005
Determination of internal stress by
the Stoney formula
no current standard is superseded
ISBN 978 058049935 7
£17.00 members, £34.00
non-membersRPI/13
BS EN ISO 1269:2006
Plastics. Homopolymer and
copolymer resins of vinyl chloride.
Determination of volatile matter
(including water)
supersedes BS 2782-4:Method
454D:1978ISBN 0 580 49816 6
£28.00 members, £56.00
non-membersPRI/82
BS EN 1297:2004
Flexible sheets for waterproofing.
Bitumen, plastic and rubber sheets
for roof waterproofing. Method of
artificial ageing by long term
exposure to the combination of UV
radiation, elevated temperature
and water
no current standard is superseded
ISBN 0 580 49848 4
£28.00 members, £56.00
non-membersB/546/2
BS EN 1337:-
Structural bearings
BS EN 1337-2:2004
Sliding elements
supersedes BS EN 1337-2:2001 which
is withdrawn, partially supersedes BS
5400-9.1:1983 and BS 5400-9.2:1983ISBN 0 580 49849 2
£74.00 members, £148.00
non-membersB/522
Page 2 of 71BS EN PUBLICATIONS
BS EN 1337-3:2005
Elastomeric bearings
partially supersedes BS
5400-9.1:1983 and BS 5400-9.2:1983ISBN 0 580 49850 6
£74.00 members, £148.00
non-membersB/522
BS EN 1337-5:2005
Pot bearings
partially supersedes BS
5400-9.1:1983 and BS 5400-9.2:1983ISBN 0 580 49851 4
£68.00 members, £136.00
non-membersB/522
BS EN 1337-7:2004
Spherical and cylindrical PTFE
bearings
supersedes BS EN 1337-7:2001 which
is withdrawn, partially supersedes BS
5400-9.1:1983 and BS 5400-9.2:1983ISBN 0 580 49852 2
£49.00 members, £98.00
non-membersB/522
BS EN 1731:2006
Personal eye protection. Mesh eye
and face protectors
supersedes BS EN 1731:1998
ISBN 0 580 49882 4
£34.00 members, £68.00
non-membersPH/2/2
BS EN ISO 1805:2006
Fishing nets. Determination of
breaking force and knot breaking
force of netting yarns
no current standard is superseded
ISBN 0 580 49883 2
£34.00 members, £68.00
non-membersTCI/77
BS EN 1881:2006
Products and systems for the
protection and repair of concrete
structures. Test methods. Testing
of anchoring products by the
pull-out method
no current standard is superseded
ISBN 0 580 49827 1
£28.00 members, £56.00
non-membersB/517/8
BS EN 1926:2006
Natural stone test methods.
Determination of uniaxial
compressive strength
supersedes BS EN 1926:1999
ISBN 978 058049936 4
£34.00 members, £68.00
non-membersB/545
BS EN 1936:2006
Natural stone test methods.
Determination of real density and
apparent density, and of total and
open porosity
supersedes BS EN 1936:1999
ISBN 978 058049919 7
£28.00 members, £56.00
non-membersB/545
BS EN 1993:-
Eurocode 3. Design of steel
structures
BS EN 1993-1:-
General rules
BS EN 1993-1-3:2006
Supplementary rules for
cold-formed members and
sheeting
supersedes DD ENV 1993-1-3:2001
which is withdrawn and partially
supersedes BS 5950-5:1998, BS
5950-6:1995 and BS 5950-9:1994ISBN 0 580 49665 1
£90.00 members, £180.00
non-membersB/525/31
BS EN 1993-1-4:2006
Supplementary rules for stainless
steels
no current standard is superseded
ISBN 0 580 49666 X
£56.00 members, £112.00
non-membersB/525/31
BS EN 1993-1-5:2006
Plated structural elements
partially supersedes BS 449-2:1969,
BS 5400-3:2000 and BS 5950-1:2000ISBN 0 580 49667 8
£68.00 members, £136.00
non-membersB/525/31
BS EN 1993-1-11:2006
Design of structures with tension
components
no current standard is superseded
ISBN 0 580 49668 6
£56.00 members, £112.00
non-membersB/525/31
BS EN 2335:2005
Aerospace series. Bearings,
spherical plain in corrosion
resisting steel without assembly
slot. Dimensions and loads
supersedes BS EN 2335:1990
ISBN 0 580 49854 9
£28.00 members, £56.00
non-membersACE/12
BS EN 3155:-
Aerospace series. Electrical
contacts used in elements of
connection
BS EN 3155-014:2006
Contacts, electrical, male, type A,
crimp, class S. Product standard
no current standard is superseded
ISBN 978 058049937 1
£28.00 members, £56.00
non-membersACE/6/-/3
Page 3 of 71BS EN PUBLICATIONS
BS EN 3155-015:2006
Contacts, electrical, female, type A,
crimp, class S. Product standard
no current standard is superseded
ISBN 978 058049938 8
£28.00 members, £56.00
non-membersACE/6/-/3
BS EN 3155-030:2006
Contacts, electrical, coaxial,
shielded, size 12, male, type D,
crimp, class R. Product standard
no current standard is superseded
ISBN 978 058049939 5
£28.00 members, £56.00
non-membersACE/6/-/3
BS EN 3155-031:2006
Contacts, electrical, coaxial,
shielded, size 12, female, type D,
crimp, class R. Product standard
no current standard is superseded
ISBN 978 058049940 1
£28.00 members, £56.00
non-membersACE/6/-/3
BS EN 3155-035:2006
Contacts, electrical, triaxial, size
08, female, type D, crimp, class R.
Product standard
no current standard is superseded
ISBN 978 058049941 8
£34.00 members, £68.00
non-membersACE/6/-/3
BS EN 3155-059:2006
Contacts, electrical, coaxial, size
16, female, type D, solder, class R.
Product standard
no current standard is superseded
ISBN 978 058049942 5
£34.00 members, £68.00
non-membersACE/6/-/3
BS EN ISO 3166:-
Codes for the representation of
names of countries and their
subdivisions
BS EN ISO 3166-1:2006
Country codes
supersedes BS EN ISO 3166-1:1998
ISBN 0 580 49824 7
£74.00 members, £148.00
non-membersIDT/2/11
BS EN 3339:2006
Aerospace series. Aluminium alloy
AL-P7010-T76. Die forgings. a $3L
200 mm
no current standard is superseded
ISBN 978 058049943 2
£64.00 members, £128.00
non-membersACE/61/-/24
BS EN 3476:2006
Aerospace series. Steel
FE-PL1501 (30CrMo12). Air
melted. Softened. Forging stock. a
or D $3L 300 mm
no current standard is superseded
ISBN 978 058049944 9
£28.00 members, £56.00
non-membersACE/61/-/15
BS EN 3645:-
Aerospace series. Connectors,
electrical, circular, scoop-proof,
triple start threaded coupling,
operating temperature 175$0DC or
200$0DC continuous
BS EN 3645-003:2006
Receptacle square flange
mounting. Product standard
no current standard is superseded
ISBN 978 058049947 0
£28.00 members, £56.00
non-membersACE/6/-/3
BS EN 3645-004:2006
Receptacle, hermetic, square
flange mounting. Product standard
no current standard is superseded
ISBN 0 580 49948 7
£28.00 members, £56.00
non-membersACE/6/-/3
BS EN 3645-005:2006
Receptacle, hermetic, round
flange, brasage mounting. Product
standard
no current standard is superseded
ISBN 978 058049949 4
£17.00 members, £34.00
non-membersACE/6/-/3
BS EN 3645-006:2006
Protective cover for receptacle.
Product standard
no current standard is superseded
ISBN 978 058049950 0
£28.00 members, £56.00
non-membersACE/6/-/3
BS EN 3645-009:2006
Receptacle, round flange, jam nut
mounting. Product standard
no current standard is superseded
ISBN 978 058049951 7
£28.00 members, £56.00
non-membersACE/6/-/3
BS EN 3645-010:2006
Receptacle, hermetic, round
flange, jam nut mounting. Product
standard
no current standard is superseded
ISBN 978 058049952 4
£28.00 members, £56.00
non-membersACE/6/-/3
Page 4 of 71BS EN PUBLICATIONS
BS EN 3645-011:2006
Lanyard release plug with
grounding fingers. Type 1. Product
standard
no current standard is superseded
ISBN 978 058049953 1
£28.00 members, £56.00
non-membersACE/6/-/3
BS EN 3645-012:2006
Lanyard release plug with
grounding fingers. Type 2. Product
standard
no current standard is superseded
ISBN 978 058049954 8
£28.00 members, £56.00
non-membersACE/6/-/3
BS EN 3716:-
Aerospace series. Connector,
single-way with triaxial interface,
for transmission of digital data
BS EN 3716-005:2006
Crimp receptacle. Product
standard
no current standard is superseded
ISBN 978 058049955 5
£28.00 members, £56.00
non-membersACE/6/-/3
BS EN ISO 4618:2006
Paints and varnishes. Terms and
definitions
supersedes BS EN 971-1:1996, BS
EN ISO 4618-2:2000 and BS EN ISO
4618-3:2000ISBN 0 580 49555 8
£74.00 members, £148.00
non-membersSTI/11
BS EN ISO 5840:2005
Cardiovascular implants. Cardiac
valve prostheses
supersedes BS 6444-1:1990 and BS
EN 12006-1:1999ISBN 0 580 49872 7
£74.00 members, £148.00
non-membersCH/150/2
BS EN ISO 9333:2006
Dentistry. Brazing materials
supersedes BS EN 29333:1992
ISBN 0 580 49735 6
£34.00 members, £68.00
non-membersCH/106/2
BS EN 10130:2006
Cold rolled low carbon steel flat
products for cold forming.
Technical delivery conditions
supersedes BS EN 10130:1999
ISBN 0 580 49900 6
£34.00 members, £68.00
non-membersISE/10
BS EN 10300:2005
Steel tubes and fittings for onshore
and offshore pipelines. Bitumen hot
applied materials for external
coating
supersedes BS 4147:1980
ISBN 0 580 49877 8
£68.00 members, £136.00
non-membersISE/16/-/11
BS EN 12012:-
Plastics and rubber machines. Size
reduction machines
BS EN 12012-4:2006
Safety requirements for
agglomerators
no current standard is superseded
ISBN 0 580 49788 7
£34.00 members, £68.00
non-membersMCE/3/2
BS EN 12372:2006
Natural stone test methods.
Determination of flexural strength
under concentrated load
supersedes BS EN 12372:1999
ISBN 978 058049920 3
£34.00 members, £68.00
non-membersB/545
BS EN 12588:2006
Lead and lead alloys. Rolled lead
sheet for building purposes
supersedes BS EN 12588:1999
ISBN 978 058049960 9
£34.00 members, £68.00
non-membersNFE/22
BS EN 12788:2005
Advanced technical ceramics.
Mechanical properties of ceramic
composites at high temperature
under inert atmosphere.
Determination of flexural strength
supersedes DD ENV 12788:1998
ISBN 0 580 49862 X
£34.00 members, £68.00
non-membersRPI/13
BS EN 12916:2006
(BS 2000-391:2006)
Petroleum products. Determination
of aromatic hydrocarbon types in
middle distillates. High
performance liquid
chromatography method with
refractive index detection
supersedes BS EN 12916:2000
ISBN 0 580 49803 4
£17.48 members, £23.30
non-membersPTI/13
BS EN 13234:2006
Advanced technical ceramics.
Mechanical properties of ceramic
composites at ambient
temperature. Evaluation of the
resistance to crack propagation by
notch sensitivity testing
supersedes DD ENV 13234:2000
ISBN 0 580 49864 6
£34.00 members, £68.00
non-membersRPI/13
Page 5 of 71BS EN PUBLICATIONS
BS EN 13235:2006
Advanced technical ceramics.
Mechanical properties of ceramic
composites at high temperature
under inert atmosphere.
Determination of creep behaviour
supersedes DD ENV 13235:2000
ISBN 0 580 49863 8
£34.00 members, £68.00
non-membersRPI/13
BS EN 13307:-
Timber blanks and semi-finished
profiles for non-structural uses
BS EN 13307-1:2006
Requirements
no current standard is superseded
ISBN 0 580 49753 4
£34.00 members, £68.00
non-membersB/543
BS EN ISO 13705:2006
Petroleum, petrochemical and
natural gas industries. Fired
heaters for general refinery service
supersedes BS EN ISO 13705:2002
ISBN 0 580 49790 9
£106.00 members, £212.00
non-membersPSE/17/-/6
BS EN 13803:-
Railway applications. Track. Track
alignment design parameters.
Track gauges 1435 mm and wider
BS EN 13803-2:2006
Switches and crossings and
comparable alignment design
situations with abrupt changes of
curvature
no current standard is superseded
ISBN 978 058049961 6
£64.00 members, £128.00
non-membersRAE/2/-/3
BS EN 13981:-
Aluminium and aluminium alloys.
Products for structural railway
applications. Technical conditions
for inspection and delivery
BS EN 13981-4:2006
Forgings
no current standard is superseded
ISBN 0 580 49832 8
£49.00 members, £98.00
non-membersNFE/35
BS EN 14220:2006
Timber and wood-based materials
in external windows, external door
leaves and external doorframes.
Requirements and specifications
no current standard is superseded
ISBN 0 580 49754 2
£49.00 members, £98.00
non-membersB/543
BS EN 14221:2006
Timber and wood-based materials
in internal windows, internal door
leaves and internal doorframes.
Requirements and specifications
no current standard is superseded
ISBN 0 580 49755 0
£49.00 members, £98.00
non-membersB/543
BS EN 14255:-
Measurement and assessment of
personal exposures to incoherent
optical radiation
BS EN 14255-4:2006
Terminology and quantities used in
UV-, visible and IR-exposure
measurements
no current standard is superseded
ISBN 0 580 49676 7
£34.00 members, £68.00
non-membersCPL/34/10
BS EN 14358:2006
Timber structures. Calculation of
characteristic 5-percentile values
and acceptance criteria for a
sample
no current standard is superseded
ISBN 978 058049962 3
£28.00 members, £56.00
non-membersB/518
BS EN 14439:2006
Cranes. Safety. Tower cranes
no current standard is superseded
ISBN 978 058049963 0
£64.00 members, £128.00
non-membersMHE/3/5
BS EN 14452:2005
Devices to prevent pollution by
backflow of potable water. Pipe
interrupter with atmospheric vent
and moving element DN 10 to DN
20. Family D, type B
no current standard is superseded
ISBN 0 580 49769 0
£34.00 members, £68.00
non-membersB/505/4
BS EN 14512:2006
Tanks for the transport of
dangerous goods. Tank equipment
for the transport of liquid
chemicals. Hinged manhole cover
and neckrings with pivoting bolts
no current standard is superseded
ISBN 0 580 49880 8
£28.00 members, £56.00
non-membersAUE/18
BS EN 14620:-
Design and manufacture of site
built, vertical, cylindrical,
flat-bottomed steel tanks for the
storage of refrigerated, liquefied
gases with operating temperatures
between 0$0DC and -165$0DC
Page 6 of 71BS EN PUBLICATIONS
BS EN 14620-1:2006
General
supersedes BS 7777-1:1993
ISBN 0 580 49775 5
£56.00 members, £112.00
non-membersPVE/15
BS EN 14620-2:2006
Metallic components
supersedes BS 7777-2:1993
ISBN 0 580 49776 3
£68.00 members, £136.00
non-membersPVE/15
BS EN 14620-3:2006
Concrete components
supersedes BS 7777-3:1993
ISBN 0 580 49777 1
£49.00 members, £98.00
non-membersPVE/15
BS EN 14620-4:2006
Insulation components
supersedes BS 7777-3:1993
ISBN 0 580 49778 X
£56.00 members, £112.00
non-membersPVE/15
BS EN 14620-5:2006
Testing, drying, purging and
cool-down
no current standard is superseded
ISBN 0 580 49779 8
£34.00 members, £68.00
non-membersPVE/15
BS EN 14673:2006
Safety of machinery. Safety
requirements for hydraulically
powered open die hot forging
presses for the forging of steel and
non-ferrous metals
no current standard is superseded
ISBN 0 580 49756 9
£64.00 members, £128.00
non-membersMCE/23
BS EN 14704:-
Determination of the elasticity of
fabrics
BS EN 14704-3:2006
Narrow fabrics
no current standard is superseded
ISBN 978 058049964 7
£34.00 members, £68.00
non-membersTCI/24
BS EN 14879:-
Organic coating systems and
linings for protection of industrial
apparatus and plants against
corrosion caused by aggressive
media
BS EN 14879-2:2006
Coatings on metallic components
no current standard is superseded
ISBN 978 058049918 0
£68.00 members, £136.00
non-membersISE/16
BS EN 14879-3:2006
Coatings on concrete components
no current standard is superseded
ISBN 978 058049917 3
£68.00 members, £136.00
non-membersISE/16
BS EN ISO 14880:-
Optics and photonics. Microlens
arrays
BS EN ISO 14880-2:2006
Test methods for wavefront
aberrations
no current standard is superseded
ISBN 978 058049965 4
£56.00 members, £112.00
non-membersCPW/172
BS EN 14885:2006
Chemical disinfectants and
antiseptics. Application of
European standards for chemical
disinfectants and antiseptics
no current standard is superseded
ISBN 0 580 49757 7
£56.00 members, £112.00
non-membersCH/216
BS EN 14932:2006
Plastics. Stretch thermoplastic
films for wrapping bales.
Requirements and test methods
no current standard is superseded
ISBN 978 058049966 1
£56.00 members, £112.00
non-membersPRI/75
BS EN 14982:2006
Plastics piping systems.
Thermoplastics shafts or risers for
inspection chambers and
manholes. Determination of ring
stiffness
no current standard is superseded
ISBN 0 580 49721 6
£34.00 members, £68.00
non-membersPRI/88/1/P1
BS EN 14984:2006
Liming materials. Determination of
product effect on soil pH. Soil
incubation method
no current standard is superseded
ISBN 0 580 49825 5
£49.00 members, £98.00
non-membersCII/37
BS EN 14987:2006
Plastics. Evaluation of disposability
in waste water treatment plants.
Test scheme for final acceptance
and specifications
no current standard is superseded
ISBN 0 580 49792 5
£28.00 members, £56.00
non-membersPRI/21
Page 7 of 71BS EN PUBLICATIONS
DD CEN/TS 14997:2006
Characterization of waste.
Leaching behaviour tests.
Influence of pH on leaching with
continuous pH-control
no current standard is superseded
ISBN 0 580 49885 9
£28.00 members, £56.00
non-membersB/508/3
DD CEN/TS 15022:-
Copper and copper alloys.
Determination of tin content
DD CEN/TS 15022-4:2006
Medium tin content. Flame atomic
absorption spectrometry method
(FAAS)
no current standard is superseded
ISBN 978 058049914 2
£13.00 members, £26.00
non-membersNFE/34
DD CEN/TS 15023:-
Copper and copper alloys.
Determination of nickel content
DD CEN/TS 15023-3:2006
Flame atomic absorption
spectrometry method (FAAS)
no current standard is superseded
ISBN 978 058049912 8
£17.00 members, £34.00
non-membersNFE/34
DD CEN/TS 15025:2006
Copper and copper alloys.
Determination of magnesium
content. Flame atomic absorption
spectrometry method (FAAS)
no current standard is superseded
ISBN 978 058049913 5
£17.00 members, £34.00
non-membersNFE/34
BS EN 15035:2006
Heating boilers. Special
requirements for oil fired room
sealed units up to 70 kW
no current standard is superseded
ISBN 978 058049906 7
£56.00 members, £112.00
non-membersRHE/10
DD CEN/TS 15084:2006
Liming materials. Guide to the
determination of the lime
requirement
no current standard is superseded
ISBN 0 580 49802 6
£17.00 members, £34.00
non-membersCII/37
BS EN 15109:2006
Surface active agents.
Determination of the active matter
content of
alkylamidopropylbetaines
no current standard is superseded
ISBN 0 580 49886 7
£34.00 members, £68.00
non-membersCII/34
BS EN 15146:2006
Solid softwood panelling and
cladding. Machined profiles without
tongue and groove
no current standard is superseded
ISBN 978 058049967 8
£34.00 members, £68.00
non-membersB/543
BS EN 15202:2006
LPG equipment and accessories.
Essential operational dimensions
for LPG cylinder valve outlet and
associated equipment connections
no current standard is superseded
ISBN 978 058049916 6
£64.00 members, £128.00
non-membersPVE/19
BS EN 15205:2006
Determination of hexavalent
chromium in corrosion protection
layers. Qualitative analysis
no current standard is superseded
ISBN 0 580 49888 3
£28.00 members, £56.00
non-membersSTI/33
BS EN 15207:2006
Tanks for transport of dangerous
goods. Plug/socket connection and
supply characteristics for service
equipment in hazardous areas with
24 V nominal supply voltage
no current standard is superseded
ISBN 978 058049968 5
£34.00 members, £68.00
non-membersAUE/18
DD CEN/TS 15211:2006
Health informatics. Mapping of
hierarchical message descriptions
to XML
no current standard is superseded
ISBN 0 580 49732 1
£56.00 members, £112.00
non-membersIST/35
DD CEN/TS 15231:2006
Open data communication in
building automation, controls and
building management. Mapping
between Lonworks and BACnet
no current standard is superseded
ISBN 0 580 49889 1
£34.00 members, £68.00
non-membersRHE/16
BS EN 15238:2006
Soil improvers and growing media.
Determination of quantity for
materials with particle size greater
than 60 mm
no current standard is superseded
ISBN 978 058049921 0
£34.00 members, £68.00
non-membersAW/20
Page 8 of 71BS EN PUBLICATIONS
DD CEN/TS 15451:2006
Fertilizers. Determination of
chelating agents. Determination of
iron chelated by EDDHSA by ion
pair chromatography
no current standard is superseded
ISBN 0 580 49830 1
£17.00 members, £34.00
non-membersCII/37
DD CEN/TS 15452:2006
Fertilizers. Determination of
chelating agents. Determination of
iron chelated by o,p-EDDHA by
reversed phase HPLC
no current standard is superseded
ISBN 0 580 49829 8
£17.00 members, £34.00
non-membersCII/37
DD CEN/TS 15475:2006
Fertilizers. Determination of
ammoniacal nitrogen
no current standard is superseded
ISBN 0 580 49801 8
£17.00 members, £34.00
non-membersCII/37
DD CEN/TS 15476:2006
Fertilizers. Determination of nitric
and ammoniacal nitrogen
according to Devarda
no current standard is superseded
ISBN 0 580 49800 X
£17.00 members, £34.00
non-membersCII/37
DD CEN/TS 15477:2006
Fertilizers. Determination of the
water-soluble potassium content
no current standard is superseded
ISBN 0 580 49799 2
£13.00 members, £26.00
non-membersCII/37
DD CEN/TS 15478:2006
Fertilizers. Determination of total
nitrogen in urea
no current standard is superseded
ISBN 0 580 49798 4
£17.00 members, £34.00
non-membersCII/37
DD CEN/TS 15479:2006
Fertilizers. Spectrophotometric
determination of biuret in urea
no current standard is superseded
ISBN 0 580 49797 6
£13.00 members, £26.00
non-membersCII/37
BS EN ISO 15535:2006
General requirements for
establishing anthropometric
databases
supersedes BS EN ISO 15535:2003
ISBN 978 058049969 2
£49.00 members, £98.00
non-membersPH/9/4
BS EN ISO 17201:-
Acoustics. Noise from shooting
ranges
BS EN ISO 17201-2:2006
Estimation of muzzle blast and
projectile sound by calculation
no current standard is superseded
ISBN 0 580 49766 6
£56.00 members, £112.00
non-membersEH/1/3
BS EN ISO 18453:2005
Natural gas. Correlation between
water content and water dew point
no current standard is superseded
ISBN 0 580 49782 8
£56.00 members, £112.00
non-membersPTI/15
BS EN ISO 18753:2005
Fine ceramics (advanced
ceramics, advanced technical
ceramics). Determination of
absolute density of ceramic
powders by pyknometer
supersedes BS EN 725-7:1996
ISBN 0 580 49892 1
£34.00 members, £68.00
non-membersRPI/13
BS EN ISO 18756:2005
Fine ceramics (advanced
ceramics, advanced technical
ceramics). Determination of
fracture toughness of monolithic
ceramics at room temperature by
the surface crack in flexure (SCF)
method
no current standard is superseded
ISBN 0 580 49897 2
£56.00 members, £112.00
non-membersRPI/13
BS EN ISO 18757:2005
Fine ceramics (advanced
ceramics, advanced technical
ceramics). Determination of
specific surface area of ceramic
powders by gas adsorption using
the BET method
supersedes BS EN 725-6:1996
ISBN 0 580 49891 3
£34.00 members, £68.00
non-membersRPI/13
BS EN ISO 20776:-
Clinical laboratory testing and in
vitro diagnostic test systems.
Susceptibility testing of infectious
agents and evaluation of
performance of antimicrobial
susceptibility test devices
Page 9 of 71BS EN PUBLICATIONS
BS EN ISO 20776-1:2006
Reference method for testing the in
vitro activity of antimicrobial agents
against rapidly growing aerobic
bacteria involved in infectious
diseases
no current standard is superseded
ISBN 0 580 49791 7
£49.00 members, £98.00
non-membersCH/212
BS EN ISO 21178:2006
Light conveyor belts. Determination
of electrical resistances
supersedes BS EN 1637:1999
ISBN 0 580 49809 3
£49.00 members, £98.00
non-membersPRI/67
BS EN ISO 21179:2006
Light conveyor belts. Determination
of the electrostatic field generated
by a running light conveyor belt
supersedes BS EN 1718:1999
ISBN 0 580 49804 2
£28.00 members, £56.00
non-membersPRI/67
BS EN ISO 21180:2006
Light conveyor belts. Determination
of the maximum tensile strength
supersedes BS EN 1722:1999
ISBN 0 580 49805 0
£34.00 members, £68.00
non-membersPRI/67
BS EN ISO 21181:2006
Light conveyor belts. Determination
of the relaxed elastic modulus
supersedes BS EN 1723:2000
ISBN 0 580 49806 9
£34.00 members, £68.00
non-membersPRI/67
BS EN ISO 21182:2006
Light conveyor belts. Determination
of the coefficient of friction
supersedes BS EN 1724:1999
ISBN 0 580 49807 7
£34.00 members, £68.00
non-membersPRI/67
BS EN ISO 21183:-
Light conveyor belts
BS EN ISO 21183-1:2006
Principal characteristics and
applications
supersedes BS EN 873:1997
ISBN 0 580 49808 5
£28.00 members, £56.00
non-membersPRI/67
BS EN ISO 21549:-
Health informatics. Patient
healthcard data
BS EN ISO 21549-4:2006
Extended clinical data
no current standard is superseded
ISBN 0 580 49789 5
£49.00 members, £98.00
non-membersIST/35
BS EN ISO 22675:2006
Prosthetics. Testing of ankle-foot
devices and foot units.
Requirements and test methods
no current standard is superseded
ISBN 0 580 48654 0
£78.00 members, £156.00
non-membersCH/168
BS EN ISO 24013:2006
Optics and photonics. Lasers and
laser-related equipment.
Measurement of phase retardation
of optical components for polarized
laser radiation
no current standard is superseded
ISBN 0 580 49898 0
£49.00 members, £98.00
non-membersCPW/172
BS EN 50116:2006
Information technology equipment.
Routine electrical safety testing in
production
supersedes BS EN 50116:1996 which
remains currentISBN 0 580 49860 3
£28.00 members, £56.00
non-membersEPL/108
BS EN 50470:-
Electricity metering equipment
(A.C.)
BS EN 50470-1:2006
General requirements, tests and
test conditions. Metering
equipment (class indexes A, B and
C)
no current standard is superseded
ISBN 0 580 49810 7
£68.00 members, £136.00
non-membersPEL/13
BS EN 50470-2:2006
Particular requirements.
Electromechanical meters for
active energy (class indexes A and
B)
no current standard is superseded
ISBN 0 580 49811 5
£49.00 members, £98.00
non-membersPEL/13
Page 10 of 71BS EN PUBLICATIONS
BS EN 50470-3:2006
Particular requirements. Static
meters for active energy (class
indexes A, B and C)
no current standard is superseded
ISBN 0 580 49812 3
£56.00 members, £112.00
non-membersPEL/13
BS EN 55015:2006
Limits and methods of
measurement of radio disturbance
characteristics of electrical lighting
and similar equipment
supersedes BS EN 55015:2001 which
remains currentISBN 978 058050001 5
£64.00 members, £128.00
non-membersGEL/210/11
BS EN 55016:-
Specification for radio disturbance
and immunity measuring apparatus
and methods
BS EN 55016-1-3:2006
Radio disturbance and immunity
measuring apparatus. Ancillary
equipment. Disturbance power
supersedes BS EN 55016-1-3:2004
which remains currentISBN 978 058050002 2
£56.00 members, £112.00
non-membersGEL/210/12
BS EN 60216:-
Electrical insulating materials.
Thermal endurance properties
BS EN 60216-6:2006
Determination of thermal
endurance indices (TI and RTE) of
an insulating material using the
fixed time frame method
supersedes BS EN 60216-6:2004
ISBN 0 580 49815 8
£68.00 members, £136.00
non-membersGEL/112
BS EN 60745:-
Hand-held motor-operated electric
tools. Safety
BS EN 60745-1:2006
General requirements
supersedes BS EN 606745-1:2003
which remains currentISBN 0 580 49842 5
£96.00 members, £192.00
non-membersCPL/61/6
BS EN 60745-2-15:2006
Particular requirements for hedge
trimmers
supersedes BS EN 50144-2-15:2001
which remains currentISBN 0 580 49841 7
£49.00 members, £98.00
non-membersCPL/61/6
BS EN 60749:-
Semiconductor devices.
Mechanical and climatic test
methods
BS EN 60749-35:2006
Acoustic microscopy for plastic
encapsulated electronic
components
no current standard is superseded
ISBN 0 580 49739 9
£49.00 members, £98.00
non-membersEPL/47
BS EN 60749-39:2006
Measurement of moisture
diffusivity and water solubility in
organic materials used for
semiconductor components
partially supersedes BS EN
60749:1999ISBN 0 580 49866 2
£28.00 members, £56.00
non-membersEPL/47
BS EN 60870:-
Telecontrol equipment and
systems
BS EN 60870-5-104:2006
Transmission protocols. Network
access for IEC 60870-5-101 using
standard transport profiles
supersedes BS EN 60870-5-104:2001
ISBN 0 580 49781 X
£74.00 members, £148.00
non-membersPEL/57
BS EN 60904:-
Photovoltaic devices
BS EN 60904-1:2006
Measurement of photovoltaic
current-voltage characteristics
supersedes BS EN 60904-1:1993
ISBN 0 580 49894 8
£34.00 members, £68.00
non-membersGEL/82
BS EN 60958:-
Digital audio interface
BS EN 60958-3:2006
Consumer applications
supersedes BS EN 60958-3:2003
which remains currentISBN 0 580 49677 5
£68.00 members, £136.00
non-membersEPL/100
BS EN 61000:-
Electromagnetic compatibility
(EMC)
BS EN 61000-4-5:2006
Testing and measurement
techniques. Surge immunity test
supersedes BS EN 61000-4-5:1995
which remains currentISBN 0 580 49796 8
£68.00 members, £136.00
non-membersGEL/210/12
Page 11 of 71BS EN PUBLICATIONS
BS EN 61204:-
Low voltage power supplies, D.C.
Output
BS EN 61204-7:2006
Safety requirements
no current standard is superseded
ISBN 0 580 49893 X
£96.00 members, £192.00
non-membersPEL/22
BS EN 61747:-
Liquid crystal display devices
BS EN 61747-3:2006
Liquid crystal display (LCD) cells.
Sectional specification
supersedes BS EN 61747-3:2000
ISBN 0 580 49819 0
£34.00 members, £68.00
non-membersEPL/47
BS EN 61937:-
Digital audio. Interface for
non-linear PCM encoded audio
bitstreams applying IEC 60958
BS EN 61937-5:2006
Non-linear PCM bitstreams
according to the DTS (digital
theatre systems) format(s)
supersedes BS EN 61937-5:2002
which remains currentISBN 978 058049903 6
£34.00 members, £68.00
non-membersEPL/100
BS EN 62002:-
Mobile and portable DVB-T/H radio
access
BS EN 62002-1:2006
Interface specification
no current standard is superseded
ISBN 0 580 49813 1
£68.00 members, £136.00
non-membersEPL/100
BS EN 62002-2:2006
Interface conformance testing
no current standard is superseded
ISBN 0 580 49814 X
£56.00 members, £112.00
non-membersEPL/100
BS EN 62047:-
Semiconductor devices.
Micro-electromechanical devices
BS EN 62047-2:2006
Tensile testing method of thin film
materials
no current standard is superseded
ISBN 0 580 49740 2
£34.00 members, £68.00
non-membersEPL/47
BS EN 62076:2006
Industrial electroheating
installations. Test methods for
induction channel and induction
crucible furnaces
supersedes BS 7690:1993 and BS EN
60646:1999ISBN 0 580 48991 4
£34.00 members, £68.00
non-membersPEL/27
BS EN 62271:-
High-voltage switchgear and
controlgear
BS EN 62271-3:2006
Digital interfaces based on IEC
61850
no current standard is superseded
ISBN 0 580 49820 4
£68.00 members, £136.00
non-membersPEL/17/1
BS EN 62317:-
Ferrite cores. Dimensions
BS EN 62317-8:2006
E-cores
partially supersedes BS EN
62358:2004ISBN 978 058049915 9
£34.00 members, £68.00
non-membersEPL/51
BS EN 62384:2006
D.C. or A.C. supplied electronic
control gear for LED modules.
Performance requirements
no current standard is superseded
ISBN 0 580 49678 3
£34.00 members, £68.00
non-membersCPL/34/3
BS ENs IMPLEMENTED BY
AMENDMENTBS EN ISO 13628:-
Petroleum and natural gas
industries. Design and operation of
subsea production systems
BS EN ISO 13628-10:2006
Specification for bonded flexible
pipe
BS EN ISO 13679:2006
Petroleum and natural gas
industries. Procedures for testing
casing and tubing connections
BS EN ISO 16712:2006
Water quality. Determination of
acute toxicity of marine or
estuarine sediment to amphipods
BS EN ISO 17294:-
Water quality. Application of
inductively coupled plasma mass
spectrometry (ICP-MS)
Page 12 of 71BS ENs IMPLEMENTED BY AMENDMENT
BS EN ISO 17294-1:2006
General guidelines
BS EN ISO 19739:2005
Natural gas. Determination of
sulfur compounds using gas
chromatography
BS IMPLEMENTATIONS
BS ISO 368:2006
Spinning preparatory, spinning and
doubling (twisting) machinery.
Tubes for ring-spinning, doubling
and twisting spindles, taper 1:38
and 1:64
supersedes BS ISO 368:1991
ISBN 0 580 49839 5
£28.00 members, £56.00
non-membersTCI/33
BS ISO 871:2006
Plastics. Determination of ignition
temperature using a hot-air furnace
supersedes BS ISO 871:1996
ISBN 0 580 49847 6
£28.00 members, £56.00
non-membersPRI/26
BS ISO 4306:-
Cranes. Vocabulary
BS ISO 4306-5:2005
Bridge and gantry cranes
no current standard is superseded
ISBN 0 580 49899 9
£34.00 members, £68.00
non-membersMHE/3/3
BS ISO 4831:2006
Microbiology of food and animal
feeding stuffs. Horizontal method
for the detection and enumeration
of coliforms. Most probable number
technique
supersedes BS 5763-3:1991
ISBN 0 580 48505 6
£34.00 members, £68.00
non-membersAW/9
DD ISO/TS 4869:-
Acoustics. Hearing protectors
DD ISO/TS 4869-5:2006
Method for estimation of noise
reduction using fitting by
inexperienced test subjects
no current standard is superseded
ISBN 0 580 49881 6
£28.00 members, £56.00
non-membersEH/1/1
BS ISO 5700:2006
Wheeled tractors for agriculture
and forestry. Roll-over protective
structures (ROPS). Static test
method and acceptance conditions
supersedes BS 5947:1992
ISBN 978 058049957 9
£56.00 members, £112.00
non-membersAGE/6
BS ISO 6743:-
Lubricants, industrial oils and
related products (class L).
Classification
BS ISO 6743-5:2006
Family T (turbines)
supersedes BS 6413-5:1988
ISBN 0 580 49878 6
£28.00 members, £56.00
non-membersPTI/7
BS ISO 6886:2006
Animal and vegetable fats and oils.
Determination of oxidative stability
(accelerated oxidation test)
supersedes BS 684-2.25:1997
ISBN 0 580 49768 2
£34.00 members, £68.00
non-membersAW/307
BS ISO/IEC 7816:-
Identification cards. Integrated
circuit cards
BS ISO/IEC 7816-3:2006
Cards with contacts. Electrical
interface and transmission
protocols
no current standard is superseded
ISBN 0 580 49823 9
£68.00 members, £136.00
non-membersIST/17
BS ISO 8068:2006
Lubricants, industrial oils and
related products (class L). Family T
(turbines). Specification for
lubricating oils for turbines
no current standard is superseded
ISBN 0 580 49884 0
£49.00 members, £98.00
non-membersPTI/7
BS ISO 8422:2006
Sequential sampling plans for
inspection by attributes
supersedes BS 6001-4:1994
ISBN 978 058049584 1
£56.00 members, £112.00
non-membersSS/5
BS ISO 9911:2006
Agricultural irrigation equipment.
Manually operated small plastics
valves
no current standard is superseded
ISBN 0 580 49770 4
£34.00 members, £68.00
non-membersAGE/30
Page 13 of 71BS IMPLEMENTATIONS
BS ISO/IEC 9973:2006
Information technology. Computer
graphics, image processing and
environmental data representation.
Procedures for registration of items
supersedes BS ISO/IEC 9973:1994
ISBN 0 580 49845 X
£56.00 members, £112.00
non-membersIST/31
BS ISO 11076:2006
Aircraft. Ground-based
de-icing/anti-icing methods with
fluids
supersedes BS ISO 11076:2000
ISBN 0 580 49003 3
£56.00 members, £112.00
non-membersACE/57
BS ISO 11534:2006
Iron ores. Determination of tin.
Flame atomic absorption
spectrometric method
no current standard is superseded
ISBN 978 058049905 0
£34.00 members, £68.00
non-membersISE/58
BS ISO 11629:2004
Cranes. Measurement of the mass
of a crane and its components
no current standard is superseded
ISBN 0 580 49895 6
£28.00 members, £56.00
non-membersMHE/3
BS ISO 12082:2006
Processed cheese and processed
cheese products. Calculation of the
content of added citrate
emulsifying agents and
acidifiers/pH-controlling agents,
expressed as citric acid
supersedes BS 770-11:1997
ISBN 0 580 49865 4
£28.00 members, £56.00
non-membersAW/5
BS ISO 13300:-
Sensory analysis. General
guidance for the staff of a sensory
evaluation laboratory
BS ISO 13300-1:2006
Staff responsibilities
no current standard is superseded
ISBN 0 580 49873 5
£34.00 members, £68.00
non-membersAW/12
BS ISO 13300-2:2006
Recruitment and training of panel
leaders
no current standard is superseded
ISBN 0 580 49874 3
£34.00 members, £68.00
non-membersAW/12
BS ISO 13674:-
Road vehicles. Test method for the
quantification of on-centre handling
BS ISO 13674-2:2006
Transition test
no current standard is superseded
ISBN 978 058049911 1
£34.00 members, £68.00
non-membersAUE/15
DD ISO/TS 13899:-
Steel. Determination of Mo, Nb and
W contents in alloyed steel.
Inductively coupled plasma atomic
emission spectrometric method
DD ISO/TS 13899-3:2005
Determination of W content
no current standard is superseded
ISBN 0 580 49855 7
£17.00 members, £34.00
non-membersISE/18
BS ISO 14572:2006
Road vehicles. Round, screened
and unscreened, 60 V and 600 V
multi-core sheathed cables. Test
methods and requirements for
basic and high-performance cables
no current standard is superseded
ISBN 0 580 49727 5
£49.00 members, £98.00
non-membersAUE/16
BS ISO/IEC 14888:-
Information technology. Security
techniques. Digital signatures with
appendix
BS ISO/IEC 14888-3:2006
Discrete logarithm based
mechanisms
supersedes BS ISO/IEC 14888-3:1998
ISBN 0 580 49846 8
£74.00 members, £148.00
non-membersIST/33
BS ISO 15003:2006
Agricultural engineering. Electrical
and electronic equipment. Testing
resistance to environmental
conditions
supersedes BS 7691:1994
ISBN 0 580 49817 4
£49.00 members, £98.00
non-membersAGE/6
BS ISO/IEC 15434:2006
Information technology. Automatic
identification and data capture
techniques. Syntax for
high-capacity ADC media
supersedes BS ISO/IEC 15434:2005
ISBN 0 580 49857 3
£49.00 members, £98.00
non-membersIST/34
Page 14 of 71BS IMPLEMENTATIONS
BS ISO 15553:2006
Water quality. Isolation and
identification of Cryptosporidium
oocysts and Giardia cysts from
water
no current standard is superseded
ISBN 0 580 49843 3
£64.00 members, £128.00
non-membersEH/3/4
BS ISO/IEC 16085:2006
Systems and software engineering.
Life cycle processes. Risk
management
supersedes BS ISO/IEC 16085:2004
ISBN 978 058049977 7
£56.00 members, £112.00
non-membersIST/15
BS ISO 17087:2006
Specifications for adhesives used
for finger joints in non-structural
lumber products
no current standard is superseded
ISBN 0 580 49844 1
£49.00 members, £98.00
non-membersPRI/52
BS ISO 17321:-
Graphic technology and
photography. Colour
characterization of digital still
cameras (DSCs)
BS ISO 17321-1:2006
Stimuli, metrology, and test
procedures
no current standard is superseded
ISBN 978 058049907 4
£56.00 members, £112.00
non-membersCPW/42
BS ISO 17499:2006
Carbonaceous materials used in
the production of aluminium.
Determination of baking level
expressed by equivalent
temperature
no current standard is superseded
ISBN 0 580 49840 9
£28.00 members, £56.00
non-membersCII/24
DD ISO/TS 17996:2006
Cheese. Determination of
rheological properties by uniaxial
compression at constant
displacement rate
no current standard is superseded
ISBN 0 580 49828 X
£28.00 members, £56.00
non-membersAW/5
BS ISO 18898:2006
Rubber. Calibration and verification
of hardness testers
no current standard is superseded
ISBN 0 580 49765 8
£49.00 members, £98.00
non-membersPRI/20
DD ISO/TS 19138:2006
Geographic information. Data
quality measures
no current standard is superseded
ISBN 0 580 49896 4
£64.00 members, £128.00
non-membersIST/36
BS ISO 19903:2006
Petroleum and natural gas
industries. Fixed concrete offshore
structures
no current standard is superseded
ISBN 978 058049909 8
£84.00 members, £168.00
non-membersB/525/12
BS ISO 19904:-
Petroleum and natural gas
industries. Floating offshore
structures
BS ISO 19904-1:2006
Monohulls, semi-submersibles and
spars
no current standard is superseded
ISBN 0 580 49856 5
£96.00 members, £192.00
non-membersB/525/12
BS ISO 20302:2006
Health informatics. Health cards.
Numbering system and registration
procedure for issuer identifiers
no current standard is superseded
ISBN 978 058049910 4
£28.00 members, £56.00
non-membersIST/35
BS ISO 21308:-
Road vehicles. Product data
exchange between chassis and
bodywork manufacturers (BEP)
BS ISO 21308-2:2006
Dimensional bodywork exchange
parameters
no current standard is superseded
ISBN 0 580 49774 7
£74.00 members, £148.00
non-membersAUE/9
BS ISO 21427:-
Water quality. Evaluation of
genotoxicity by measurement of
the induction of micronuclei
BS ISO 21427-2:2006
(BS 6068-5.45:2006)
Mixed population method using the
cell line V79
no current standard is superseded
ISBN 0 580 49771 2
£49.00 members, £98.00
non-membersEH/3/5
Page 15 of 71BS IMPLEMENTATIONS
BS ISO 21485:2006
Textile machinery. Draw frame for
cotton spinning. Vocabulary and
principles of construction
no current standard is superseded
ISBN 0 580 49838 7
£34.00 members, £68.00
non-membersTCI/33
BS ISO 21543:2006
Milk products. Guidelines for the
application of near infrared
spectrometry
no current standard is superseded
ISBN 0 580 49764 X
£56.00 members, £112.00
non-membersAW/5
BS ISO 21988:2006
Abrasion-resistant cast irons.
Classification
no current standard is superseded
ISBN 978 058049901 2
£49.00 members, £98.00
non-membersISE/35
BS ISO 22032:2006
(BS 6068-2.99:2006)
Water quality. Determination of
selected polybrominated diphenyl
ethers in sediment and sewage
sludge. Method using extraction
and gas chromatography/mass
spectrometry
no current standard is superseded
ISBN 978 058049971 5
£56.00 members, £112.00
non-membersEH/3/2
BS ISO 22779:2006
Metallic coatings. Physical
vapour-deposited coatings of
aluminium. Specification and test
methods
no current standard is superseded
ISBN 0 580 49822 0
£49.00 members, £98.00
non-membersSTI/33
BS ISO 22896:2006
Road vehicles. Deployment and
sensor bus for occupant safety
systems
no current standard is superseded
ISBN 0 580 49772 0
£68.00 members, £136.00
non-membersAUE/16
BS ISO 23058:2006
Milk and milk products. Ovine and
caprine rennets. Determination of
total milk-clotting activity
no current standard is superseded
ISBN 0 580 49763 1
£34.00 members, £68.00
non-membersAW/5
BS ISO 23273:-
Fuel cell road vehicles. Safety
specifications
BS ISO 23273-3:2006
Protection of persons against
electric shock
no current standard is superseded
ISBN 0 580 49773 9
£34.00 members, £68.00
non-membersPEL/69
BS ISO 23833:2006
Microbeam analysis. Electron
probe microanalysis (EPMA).
Vocabulary
no current standard is superseded
ISBN 978 058049972 2
£68.00 members, £136.00
non-membersCII/9
BS ISO 24342:2006
Resilient floor-covering tiles.
Determination of side length, edge
straightness and squareness
no current standard is superseded
ISBN 0 580 49793 3
£34.00 members, £68.00
non-membersPRI/60
BS ISO/IEC 24730:-
Information technology. Real-time
locating systems (RTLS)
BS ISO/IEC 24730-2:2006
2,4 GHz air interface protocol
no current standard is superseded
ISBN 978 058049975 3
£56.00 members, £112.00
non-membersIST/34
DD ISO/TS 24817:2006
Petroleum, petrochemical and
natural gas industries. Composite
repairs for pipework. Qualification
and design, installation, testing and
inspection
no current standard is superseded
ISBN 978 058049976 0
£64.00 members, £128.00
non-membersPSE/17/-/6
DD ISO/TS 26844:2006
Milk and milk products.
Determination of antimicrobial
residues. Tube diffusion test
no current standard is superseded
ISBN 0 580 49853 0
£17.00 members, £34.00
non-membersAW/5
DD ISO/PAS 28003:2006
Security management systems for
the supply chain. Requirements for
bodies providing audit and
certification of supply chain
security management systems
no current standard is superseded
ISBN 0 580 49876 X
£56.00 members, £112.00
non-membersSME/32
Page 16 of 71BS IMPLEMENTATIONS
BS IEC 62275:2006
Cable management systems.
Cable ties for electrical installations
no current standard is superseded
ISBN 0 580 49682 1
£49.00 members, £98.00
non-membersPEL/213
PUBLISHED DOCUMENTS
PD 6689:2006
Surface dressing. Guidance on the
use of BS EN 12271
no current standard is superseded
ISBN 0 580 48851 9
£34.00 members, £68.00
non-membersB/510/2
PD CEN/TR 15310:-
Characterization of waste.
Sampling of waste materials
PD CEN/TR 15310-1:2006
Guidance on selection and
application of criteria for sampling
under various conditions
no current standard is superseded
ISBN 0 580 49833 6
£74.00 members, £148.00
non-membersB/508/3
PD CEN/TR 15310-2:2006
Guidance on sampling techniques
no current standard is superseded
ISBN 0 580 49834 4
£68.00 members, £136.00
non-membersB/508/3
PD CEN/TR 15310-3:2006
Guidance on procedures for
sub-sampling in the field
no current standard is superseded
ISBN 0 580 49835 2
£49.00 members, £98.00
non-membersB/508/3
PD CEN/TR 15310-4:2006
Guidance on procedures for
sample packaging, storage,
preservation, transport and
delivery
no current standard is superseded
ISBN 0 580 49836 0
£49.00 members, £98.00
non-membersB/508/3
PD CEN/TR 15310-5:2006
Guidance on the process of
defining the sampling plan
no current standard is superseded
ISBN 0 580 49837 9
£64.00 members, £128.00
non-membersB/508/3
PD CEN/TR 15472:2006
Postal services. Measurement of
transit times for parcels by the use
of a track and trace system
no current standard is superseded
ISBN 0 580 49750 X
£49.00 members, £98.00
non-membersSVS/4
PD CISPR/TR 16:-
Specification for radio disturbance
and immunity measuring apparatus
and methods
PD CISPR/TR 16-4-5:2006
Uncertainties, statistics and limit
modelling. Conditions for the use of
alternative test methods
no current standard is superseded
ISBN 0 580 49875 1
£64.00 members, £128.00
non-membersGEL/210/12
PD ISO/TR 17165:-
Hydraulic fluid power. Hose
assemblies
PD ISO/TR 17165-2:2006
Recommended practices for
hydraulic hose assemblies
no current standard is superseded
ISBN 0 580 49867 0
£49.00 members, £98.00
non-membersMCE/18/-/4
AEROSPACE SERIES
BS N:-
Aircraft oxygen systems and
equipment
BS 5N 100-5:2006
Guide to fire and explosion
hazards associated with oxygen,
including handling, storage and
replenishment
supersedes BS 4N 100-5:1999
ISBN 0 580 49312 1
£34.00 members, £68.00
non-membersACE/38
PUBLICLY AVAILABLE
SPECIFICATIONSPAS 69:2006
Guidelines for the specification and
installation of vehicle security
barriers
no current standard is superseded
ISBN 0 580 49683 X
£49.00 members, £98.00
non-members
PAS 83:2006
Guidance on codes of practice,
standardised methods and
regulations for cell-based
therapeutics
no current standard is superseded
ISBN 0 580 49088 2
£18.00 members, £18.00
non-members
Page 17 of 71PUBLICLY AVAILABLE SPECIFICATIONS
PAS 90:2006
Specification for safe working
practice for on-site maintenance
and repair of industrial trucks
no current standard is superseded
ISBN 0 580 48698 2
£30.00 members, £30.00
non-members
PAS 105:2007
Recovered paper sourcing and
quality. Code of practice
supersedes PAS 105:2005
ISBN 0 580 45246 8
£0.00 members, £0.00 non-members
SPECIALIST BOOKS FROM
BSIBIP 2047:2006
Winning with fire safety. A guide for
business
no current standard is superseded
ISBN 0 580 44095 8
£55.00 members, £55.00
non-members
BIP 2089:2006
A guide to corporate social
responsibility
no current standard is superseded
ISBN 0 580 49310 5
£19.95 members, £19.95
non-members
BIP 2102:2006
Environment management report.
Trends and best practice in waste
management
no current standard is superseded
ISBN 0 580 48412 2
£95.00 members, £95.00
non-members
KITS, SETS, PACKS AND
SERIES
KIT 189
BS 6465 sanitary installations kit
no current standard is superseded
ISBN 0 580 49890 5
£95.00 members, £190.00
non-membersB/503
AMENDMENTS TO BRITISH
STANDARDSBS 848:-
Fans for general purposes
BS 848-2.2:-
Methods of noise testing.
Determination of fan sound power
levels under standardized
laboratory conditions. Reverberant
room method
BS 4875:-
Strength and stability of furniture
BS 4875-7:2006
Domestic and contract storage
furniture. Performance
requirements
CORRIGENDUM 1 AMD 16830
AMD 16830
FW/0
BS 5499:-
Graphical symbols and signs.
Safety signs, including fire safety
signs
BS 5499-11:2002
Water safety signs
AMENDMENT 1 AMD 16783
AMD 16783
PH/8/2
BS 6068:-
Water quality
BS 6068-2.91:-
Physical, chemical and
biochemical methods. Application
of inductively coupled plasma
mass spectrometry (ICP-MS)
BS 6068-5.37:-
Biological methods. Determination
of acute toxicity of marine or
estuarine sediment to amphipods
BS 7531:2006
Rubber bonded fibre jointing for
industrial and aerospace purposes.
Specification
CORRIGENDUM 1 AMD 16859
AMD 16859
PSE/2
BS 7858:2006
Security screening of individuals
employed in a security
environment. Code of practice
CORRIGENDUM 1 AMD 16681
AMD 16681
GW/3
BS 8468:-
Respiratory equipment for use
against chemical, biological,
radiological and nuclear (CBRN)
agents
BS 8468-1:2006
Positive pressure, self-contained,
open-circuit breathing apparatus.
Specification
CORRIGENDUM 1 AMD 16807
AMD 16807
PH/4
BS 8888:2006
Technical product specification
(TPS). Specification
CORRIGENDUM 1 AMD 16851
AMD 16851
TDW/4
Page 18 of 71AMENDMENTS TO BRITISH STANDARDS
BS EN 26:1998
Gas fired instantaneous water
heaters for the production of
domestic hot water, fitted with
atmospheric burners
AMENDMENT 3 AMD 16769
AMD 16769
GSE/29
BS EN 30:-
Domestic cooking appliances
burning gas
BS EN 30-1-3:2003
Safety. Appliances having a glass
ceramic hotplate
AMENDMENT 1 AMD 16803
AMD 16803
GSE/35
BS EN 542:2003
Adhesives. Determination of
density
CORRIGENDUM 1 AMD 16855
AMD 16855
PRI/52
BS EN 543:2003
Adhesives. Determination of
apparent density of powder and
granule adhesives
CORRIGENDUM 1 AMD 16856
AMD 16856
PRI/52
BS EN 1251:-
Cryogenic vessels. Transportable
vacuum insulated vessels of not
more than 1000 litres volume
BS EN 1251-2:2000
Design, fabrication, inspection and
testing
CORRIGENDUM 1 AMD 16822
AMD 16822
PVE/18
BS EN ISO 4126:-
Safety devices for protection
against excessive pressure
BS EN ISO 4126-1:2004
Safety valves
CORRIGENDUM 1 AMD 16817
AMD 16817
PVE/12
BS EN ISO 4126-2:2003
Bursting disc safety devices
CORRIGENDUM 2 AMD 16820
AMD 16820
PVE/12
BS EN 10028:-
Flat products made of steels for
pressure purposes
BS EN 10028-2:2003
Non-alloy and alloy steels with
specified elevated temperature
properties
CORRIGENDUM 1 AMD 16824
AMD 16824
ISE/73/2
BS EN 10028-4:2003
Nickel alloy steels with specified
low temperature properties
CORRIGENDUM 1 AMD 16825
AMD 16825
ISE/73/2
BS EN 12092:2001
Adhesives. Determination of
viscosity
CORRIGENDUM 1 AMD 16854
AMD 16854
PRI/52
BS EN 13229:2001
Inset appliances including open
fires fired by solid fuels.
Requirements and test methods
CORRIGENDUM 1 AMD 16546
AMD 16546
RHE/28
BS EN 13458:-
Cryogenic vessels. Static vacuum
insulated vessels
BS EN 13458-2:2002
Design, fabrication, inspection and
testing
CORRIGENDUM 1 AMD 16823
AMD 16823
PVE/18
BS EN 13530:-
Cryogenic vessels. Large
transportable vacuum insulated
vessels
BS EN 13530-2:2002
Design, fabrication, inspection and
testing
CORRIGENDUM 1 AMD 16816
AMD 16816
PVE/18
BS EN 14041:2004
Resilient, textile and laminate floor
coverings. Essential characteristics
CORRIGENDUM 2 AMD 16776
AMD 16776
PRI/60
BS EN 14125:2004
Thermoplastic and flexible metal
pipework for underground
installation at petrol filling stations
AMENDMENT 1 AMD 16792
AMD 16792
PVE/21
BS EN 14398:-
Cryogenic vessels. Large
transportable non-vacuum
insulated vessels
Page 19 of 71AMENDMENTS TO BRITISH STANDARDS
BS EN 14398-2:2003
Design, fabrication, inspection and
testing
CORRIGENDUM 1 AMD 16821
AMD 16821
PVE/18
BS EN ISO 15605:2004
Adhesives. Sampling
CORRIGENDUM 1 AMD 16857
AMD 16857
PRI/52
BS EN ISO/IEC 17025:2005
General requirements for the
competence of testing and
calibration laboratories
CORRIGENDUM 1 AMD 16767
AMD 16767
CAS/1
BS EN 60060:-
High voltage test techniques
BS EN 60060-3:2006
Definitions and requirements for
on-site tests
CORRIGENDUM 1 AMD 16784
AMD 16784
PEL/42
BS EN 60068:-
Environmental testing
BS EN 60068-2-78:2002
Test methods. Test Cab. Damp
heat, steady state
CORRIGENDUM 1 AMD 15891
AMD 15891
GEL/104
BS EN 60335:-
Household and similar electrical
appliances. Safety
BS EN 60335-2-43:2003
Particular requirements for
appliances for clothes dryers and
towel rails
CORRIGENDUM 1 AMD 16827
AMD 16827
CPL/61/07
BS EN 60371:-
Insulating materials based on mica
BS EN 60371-3:-
Specifications for individual
materials
BS EN 60371-3-2:2006
Mica paper
CORRIGENDUM 1 AMD 16814
AMD 16814
GEL/15/3/11
BS EN 60371-3-5:2006
Glass-backed mica paper with an
epoxy resin binder for
post-impregnation (VPI)
CORRIGENDUM 1 AMD 16813
AMD 16813
GEL/15/3/11
BS EN 60664:-
Insulation coordination for
equipment within low-voltage
systems
BS EN 60664-4:2006
Consideration of high-frequency
voltage stress
CORRIGENDUM 1 AMD 16804
AMD 16804
GEL/109
BS EN 60684:-
Flexible insulating sleeving
BS EN 60684-3:-
Specifications for individual types
of sleeving
BS EN 60684-3-212:2006
Heat-shrinkable polyolefin
sleevings
CORRIGENDUM 1 AMD 16815
AMD 16815
GEL/15/3/5
BS EN 60684-3-233:2006
Heat-shrinkable fluoroelastomer
sleeving, flame retarded, fluid
resistant, shrink ratio 2:1
CORRIGENDUM 1 AMD 16839
AMD 16839
GEL/15/3/5
BS EN 60998:-
Connecting devices for low-voltage
circuits for household and similar
purposes
BS EN 60998-2-3:2004
Particular requirements for
connecting devices as separate
entities with insulation-piercing
clamping units
CORRIGENDUM 1 AMD 16841
AMD 16841
PEL/23/2
BS EN 61000:-
Electromagnetic compatibility
(EMC)
BS EN 61000-4-4:2004
Testing and measurement
techniques. Electrical fast
transient/burst immunity test
CORRIGENDUM 1 AMD 16840
AMD 16840
GEL/210/12
BS EN 61009:-
Residual current operated
circuit-breakers with integral
overcurrent protection for
household and similar uses
(RCBO's)
Page 20 of 71AMENDMENTS TO BRITISH STANDARDS
BS EN 61009-1:2004
General rules
CORRIGENDUM 1 AMD 16594
AMD 16594
PEL/23/1
BS EN 62040:-
Uninterruptible power systems
(UPS)
BS EN 62040-2:2006
Electromagnetic compatibility
(EMC) requirements
CORRIGENDUM 1 AMD 16838
AMD 16838
PEL/22
BS ISO 7540:2006
Ground paprika (Capsicum
annuum L.). Specification
CORRIGENDUM 1 AMD 16834
AMD 16834
AW/7
BS ISO TR 10064:-
Code of inspection practice
BS ISO TR 10064-2:1996
Inspection related to radial
composite deviations, runout, tooth
thickness and backlash
CORRIGENDUM 2 AMD 16771
AMD 16771
MCE/5
BS ISO 13347:-
Industrial fans. Determination of
fan sound power levels under
standardized laboratory conditions
BS ISO 13347-2:2004
(BS 848-2.2:2004)
Reverberant room method
CORRIGENDUM 1 AMD 16790
AMD 16790
MCE/17
BS ISO 13628:-
Petroleum and natural gas
industries. Design and operation of
subsea production systems
BS ISO 13628-10:2005
Specification for bonded flexible
pipe
AMENDMENT 1 AMD 16775
AMD 16775
PSE/17/-/4
BS ISO 13679:2002
Petroleum and natural gas
industries. Procedures for testing
casing and tubing connections
AMENDMENT 1 AMD 16774
AMD 16774
PSE/17
DD ISO/TS 16489:2006
Water quality. Guidance for
establishing the equivalency of
results
CORRIGENDUM 1 AMD 16787
AMD 16787
EH/3/2
BS ISO 16712:2005
(BS 6068-5.37:2005)
Water quality. Determination of
acute toxicity of marine or
estuarine sediment to amphipods
AMENDMENT 1 AMD 16801
AMD 16801
EH/3/5
BS ISO 17294:-
Water quality. Application of
inductively coupled plasma mass
spectrometry (ICP-MS)
BS ISO 17294-1:2004
(BS 6068-2.91:2004)
General guidelines
AMENDMENT 1 AMD 16802
AMD 16802
EH/3/2
BS ISO 19739:2004
Natural gas. Determination of
sulfur compounds using gas
chromatography
AMENDMENT 1 AMD 16788
AMD 16788
PTI/15
CP 2010:-
Code of practice for pipelines
CP 2010-2:1970
Design and construction of steel
pipelines in land
AMENDMENT 1 AMD 16832
AMD 16832
PSE/17
UPDATED BRITISH
STANDARDSBS 5410:-
Code of practice for oil firing
BS 5410-1:1997
Installations up to 45 kW output
capacity for space heating and hot
water supply purposes
AMENDMENT 2
£68.00 members, £136.00
non-membersRHE/13
BS EN 1603:1997
Thermal insulating products for
building applications.
Determination of dimensional
stability under constant normal
laboratory conditions
(23$0DC/50% relative humidity)
AMENDMENT 2
£28.00 members, £56.00
non-membersB/540
Page 21 of 71UPDATED BRITISH STANDARDS
BS EN 1606:1997
Thermal insulating products for
building applications.
Determination of compressive
creep
AMENDMENT 2
£34.00 members, £68.00
non-membersB/540
BS EN 1609:1997
Thermal insulating products for
building applications.
Determination of dimensional short
term water absorption by partial
immersion
AMENDMENT 2
£28.00 members, £56.00
non-membersB/540
BS EN 12430:1998
Thermal insulating products for
building applications.
Determination of behaviour under
point load
AMENDMENT 1
£28.00 members, £56.00
non-membersB/540
BS EN 12431:1998
Thermal insulating products for
building applications.
Determination of thickness for
floating floor insulating products
AMENDMENT 1
£28.00 members, £56.00
non-membersB/540
BS EN 12525:2000
Agricultural machinery. Front
loaders. Safety
AMENDMENT 1
£49.00 members, £98.00
non-membersAGE/6
BS EN 13041:2000
Soil improvers and growing media.
Determination of physical
properties. Dry bulk density, air
volume, water volume, shrinkage
value and total pore space
AMENDMENT 1
£49.00 members, £98.00
non-membersAW/20
BS EN 50117:-
Coaxial cables
BS EN 50117-1:2002
Generic specification
AMENDMENT 1
£34.00 members, £68.00
non-membersEPL/46
BS EN 50216:-
Power transformer and reactor
fittings
BS EN 50216-3:2002
Protective relay for hermetically
sealed liquid-immersed
transformers and reactors without
gaseous cushion
AMENDMENT 2
£28.00 members, £56.00
non-membersPEL/14
BS EN 50216-5:2002
Liquid level, pressure and flow
indicators, pressure relief devices
and dehydrating breathers
AMENDMENT 3
£34.00 members, £68.00
non-membersPEL/14
BS EN 60335:-
Household and similar electrical
appliances. Safety
BS EN 60335-1:2002
General requirements
AMENDMENT 4
£96.00 members, £192.00
non-membersCPL/61
BS EN 60371:-
Insulating materials based on mica
BS EN 60371-3:-
Specifications for individual
materials
BS EN 60371-3-4:1996
Polyester film-backed mica paper
with a B-stage epoxy resin binder
AMENDMENT 1
£28.00 members, £56.00
non-membersGEL/15/3/11
BS EN 60371-3-6:1996
Gloss-backed mica paper with a
B-stage epoxy resin binder
AMENDMENT 1
£34.00 members, £68.00
non-membersGEL/15/3/11
PD CISPR/TR 16:-
Specification for radio disturbance
and immunity measuring apparatus
and methods
PD CISPR/TR 16-4-3:2004
Uncertainties, statistics and limit
modelling. Statistical
considerations in the determination
of EMC compliance of
mass-produced products
AMENDMENT 1
£56.00 members, £112.00
non-membersGEL/210/12
SPECIAL ANNOUNCEMENTS
Page 22 of 71SPECIAL ANNOUNCEMENTS
BS MA 7
Specification for manholes with
bolted covers
The withdrawal of this standard
was announced in the December
2006 edition of Update Standards.
A note of objection has since been
received, and the committee have
decided that its withdrawal should
be reviewed.
Contact: Caroline Langdon
Email:
ISO/FDIS 1138:2007
Rubber compounding ingredients.
Carbon black. Determination of
sulfur content
This publication was originally an
amendment (ISO
1138:1981/Damd1), however after
the DIS stage it was decided that it
would be changed at FDIS stage to
a full revision of the standard. The
UK intend to adopt this revised
standard if it is now approved at
the FDIS stage.
Contact: Charlotte Armstrong
Email:
ISO/DIS 1922
Rigid cellular plastics.
Determination of shear strength
This draft international standard
has now been circulated by
ISO/TC61/SC10, of which the UK
is currently an observer member
since efforts within the industry are
more centralized within CEN.
However copies of the DIS are
available from the Programme
Manager until 27th March, 2007.
Contact: Alex Price
Email: [email protected]
PRI/72
ISO/DIS 8873:-
Rigid cellular plastics.
Spray-applied polyurethane foam
for thermal insulation
ISO/DIS 8873-2
Application
This draft international standard
has now been circulated by
ISO/TC61/SC10, of which the UK
is currently an observer member
since efforts within the industry are
more centralized within CEN.
However copies of the DIS are
available from the Programme
Manager until 27th March, 2007.
Contact: Alex Price
Email: [email protected]
PRI/72
ISO/DIS 8873-3
Test methods
This draft international standard
has now been circulated by
ISO/TC61/SC10, of which the UK
is currently an observer member
since efforts within the industry are
more centralized within CEN.
However copies of the DIS are
available from the Programme
Manager until 27th March, 2007.
Contact: Alex Price
Email: [email protected]
PRI/72
BRITISH STANDARDS
PROPOSED FOR
CONFIRMATIONBS 449:-
Specification for the use of
structural steel in building
BS 449-2:1969
Metric units
B/525/31
BS 2853:1957
Specification for the design and
testing of steel overhead runway
beams
B/525/31
BS 4481:-
Bonded abrasive products
BS 4481-2:1983
Specification for dimensions of
grinding wheels and segments
MTE/13
BS 4678:-
Cable trunking
BS 4678-2:1973
Steel underfloor (duct) trunking
PEL/213
BS 4678-4:1982
Specification for cable trunking
made of insulating material
PEL/213
BS 4999:-
General requirements for rotating
electrical machines
BS 4999-140:1987
Specification for voltage regulation
and parallel operation of A.C.
synchronous generators
PEL/2
BS 5950:-
Structural use of steelwork in
building
BS 5950-1:2000
Code of practice for design. Rolled
and welded sections
B/525/31
Page 23 of 71BRITISH STANDARDS PROPOSED FOR CONFIRMATION
BS 5950-5:1998
Code of practice for design of cold
formed thin gauge sections
B/525/31
BS 5950-6:1995
Code of practice for design of light
gauge profiled steel sheeting
B/525/31
BS 5950-9:1994
Code of practice for stressed skin
design
B/525/31
BS ISO 8529:-
Reference neutron radiations
BS ISO 8529-1:2001
Characteristics and methods of
production
NCE/2
BS ISO 11929:-
Determination of the detection limit
and decision threshold for ionizing
radiation measurements
BS ISO 11929-4:2001
Fundamentals and application to
measurements by use of
linear-scale analogue ratemeters,
without the influence of sample
treatment
NCE/2
BS ISO 12006:-
Building construction. Organization
of information about construction
works
BS ISO 12006-2:2001
Framework for classification of
information
B/500
BS ISO 14152:2001
Neutron radiation protection
shielding. Design principles and
considerations for the choice of
appropriate materials
NCE/2
BRITISH STANDARDS
REVIEWED AND CONFIRMEDBS 2955:1993
Glossary of terms relating to
particle technology
LBI/37
BS 3406:-
Methods for determination of
particle size distribution
BS 3406-1:1986
Guide to powder sampling
LBI/37
BS 3406-4:1993
Guide to microscope and image
analysis methods
LBI/37
BS 3406-9:1997
Recommendations for the filter
blockage method (mesh
obscuration)
LBI/37
BS 3625:1963
Specification for eyepiece and
screen graticules for the
determination of the particle size of
powders
LBI/37
BS 3680:-
Measurement of liquid flow in open
channels
BS 3680-7:2000
Specification of equipment for the
measurement of water level
CPI/113/5
BS 4359:-
Determination of the specific
surface area of powders
BS 4359-2:1982
Recommended air permeability
methods
LBI/37
BS 4359-4:1995
Recommendations for methods of
determination of metal surface
area using gas adsorption
techniques
LBI/37
BS 4604:-
Specification for the use of high
strength friction grip bolts in
structural steelwork. Metric series
BS 4604-1:1970
General grade
B/521
BS 4604-2:1970
Higher grade (parallel shank)
B/521
BS 5531:1988
Code of practice for safety in
erecting structural frames
B/521
BS 5950:-
Structural use of steelwork in
building
Page 24 of 71BRITISH STANDARDS REVIEWED AND CONFIRMED
BS 5950-2:2001
Specification for materials,
fabrication and erection. Rolled
and welded sections
B/521
BS 5950-3.1:1990
Design in composite construction.
Code of practice for design of
simple and continuous composite
beams
B/525/4
BS 5950-4:1994
Code of practice for design of
composite slabs with profiled steel
sheeting
B/525/4
BS 6043:-
Methods of sampling and test for
carbonaceous materials used in
aluminium manufacture
BS 6043-1:-
Electrode pitch
BS 6043-1.10:2000
Determination of volatile matter
content
CII/24
BS 6043-1.11:2000
Determination of the atomic C/H
ratio of the quinoline-insoluble
material
CII/24
BS 6043-1.13:2000
Determination of sulfur content
CII/24
BS 6043-2:-
Electrode coke
BS 6043-2.4:2000
Analysis by X-ray fluorescence
spectroscopy
CII/24
BS 6043-2.9:2000
Determination of particle size
distribution
CII/24
BS 6043-2.10:1996
Determination of electrical
resistivity of calcined coke
granules
CII/24
BS 6043-2.11:1995
Determination of volatile matter
content
CII/24
BS 6043-2.13:1996
Determination of tapped bulk
density of green and calcined coke
CII/24
BS 6043-2-18:2001
Determination of total sulfur by the
Eschka method
CII/24
BS 6043-2.20:-
Carboxy reactivity of calcined coke
BS 6043-2.20.1:2001
Determination of the reactivity by a
loss in mass method
CII/24
BS 6043-2.21.1:2001
Determination of the reactivity by
determination of ignition
temperature
CII/24
BS 6043-3:-
Electrodes
BS 6043-3.1:-
Sampling
BS 6043-3.1.1:1999
Sampling of cathodes
CII/24
BS 6043-3.1.2:1999
Sampling of anodes
CII/24
BS 6043-3.3:2000
Determination of the bulk density
(apparent density) of cathode
blocks and prebaked anodes using
a dimensions method
CII/24
BS 6043-3.4:2000
Determination of the open porosity
and bulk density (apparent density)
of cathode blocks and prebaked
anodes by a hydrostatic method
CII/24
BS 6043-3.5.1:2000
Determination of flexural strength.
Three point method
CII/24
BS 6043-3.6:2000
Determination of electrical
resistivity of cathode blocks and
prebaked anodes at ambient
temperature
CII/24
BS 6043-3.8.1:2001
Carboxy reactivity of prebaked
anodes. Determination of the
reactivity by a loss in mass method
CII/24
Page 25 of 71BRITISH STANDARDS REVIEWED AND CONFIRMED
BS 6043-3.9.1:2002
Chemical reactivity to air of
prebaked anodes. Determination of
the reactivity by a loss in mass
method
CII/24
BS 6043-4.1:2000
Cold ramming pastes. Methods of
sampling
CII/24
BS 6161:-
Methods of test for anodic
oxidation coatings on aluminium
and its alloys
BS 6161-18:1991
Determination of surface abrasion
resistance
STI/32
BS 6920:-
Suitability of non-metallic products
for use in contact with water
intended for human consumption
with regard to their effect on the
quality of the water
BS 6920-2:-
Methods of test
BS 6920-2.2:-
Odour and flavour of water
BS 6920-2.2.2:2000
Method of testing odours and
flavours imparted to water by
hoses and composite pipes and
tubes
EH/6
BS 6920-2.2.3:2000
Method of testing odours and
flavours imparted to water by
hoses for conveying water for food
and drink preparation
EH/6
BS 6920-2.3:2000
Appearance of water
EH/6
BS 6920-2.4:2000
Growth of aquatic micro-organisms
test
EH/6
BS 6920-3:2000
High temperature tests
EH/6
BS 7022:1988
Guide for geophysical logging of
boreholes for hydrogeological
purposes
CPI/113
BS 7405:1991
Guide to selection and application
of flowmeters for the measurement
of fluid flow in closed conduits
CPI/30
BS 7591:-
Porosity and pore size distribution
of materials
BS 7591-1:1992
Method of evaluation by mercury
porosimetry
LBI/37
BS 7591-2:1992
Method of evaluation by gas
adsorption
LBI/37
BS 7591-4:1993
Method of evaluation by liquid
expulsion
LBI/37
BS 7843:-
Guide to the acquisition and
management of meteorological
precipitation data
BS 7843-3.1:1999
Specification for raingauges.
Storage raingauges
CPI/113
BS 7898:1997
Guide to hydrometric data
management
CPI/113
BS ISO 9083:2001
Calculation of load capacity of spur
and helical gears. Application to
marine gears
MCE/5
BS ISO 10300:-
Calculation of load capacity of
bevel gears
BS ISO 10300-1:2001
Introduction and general influence
factors
MCE/5
BS ISO 10300-2:2001
Calculation of surface durability
(pitting)
MCE/5
BS ISO 10300-3:2001
Calculation of tooth root strength
MCE/5
Page 26 of 71BRITISH STANDARDS REVIEWED AND CONFIRMED
BS ISO 14606:2000
Surface chemical analysis. Sputter
depth profiling. Optimization using
layered systems as reference
materials
CII/60
BS ISO 14706:2000
Surface chemical analysis.
Determination of surface elemental
contamination on silicon wafers by
total-reflection X-ray fluorescence
(TXRF) spectroscopy
CII/60
BS C 15:1960
Specification for coupling
dimensions for aircraft-to-tractor
tow bar connections
ACE/57
BRITISH STANDARDS
DECLARED OBSOLESCENTBS 7044:-
Artificial sports surfaces
BS 7044-4:1991
Specification for surfaces for
multi-sports use
PRI/57
BRITISH STANDARDS
PROPOSED FOR
WITHDRAWALBS 7568:-
Press tools
BS 7568-25:1993
Guide pillars. Types
MTE/12
BS 7568-26:1993
Guide pillars. Type A, straight
pillars
MTE/12
BS 7568-27:1993
Guide pillars. Type B, end-locking
pillars
MTE/12
BS 7568-28:1993
Guide pillars. Type C, pillars with
taper lead and bush
MTE/12
BS 7568-29:1993
Guide pillars. Type D, end-locking
pillars with flange
MTE/12
BRITISH STANDARDS
WITHDRAWNBS 684:-
Methods of analysis of fats and
fatty oils
BS 684-2.25:1997
Other methods. Determination of
oxidative stability (accelerated
oxidation test)
AW/307
BS 770:-
Methods for chemical analysis of
cheese
BS 770-11:1997
Calculation of the content of added
citrate emulsifying agents and
acidifiers/pH-controlling agents in
processed cheese and processed
cheese products
AW/5
BS 2011:-
Basic environmental testing
procedures
BS 2011-2.1:-
Tests
BS 2011-2.1Ca:1977
Damp heat, steady state
GEL/104
BS 2011-2.1Cb:1990
Damp heat, steady state, primarily
for equipment
GEL/104
BS 2782:-
Methods of testing plastics.
Chemical properties
BS 2782-4:Method 454D:1978
Determination of volatile matter
(including water) of PVC resins
PRI/21
BS 3970:-
Sterilizing and disinfecting
equipment for medical products
BS 3970-6:1993
Specification for sterilizers using
low-temperature steam with
formaldehyde
LBI/35
BS 4147:1980
Specification for bitumen-based
hot-applied coating materials for
protecting iron and steel, including
suitable primers where required
ISE/16
BS 5350:-
Methods of test for adhesives
BS 5350-B1:1978
Determination of density
PRI/52
BS 5350-B8:1990
Determination of viscosity
PRI/52
Page 27 of 71BRITISH STANDARDS WITHDRAWN
BS 5350-E2:1979
Guide to sampling
PRI/52
BS 5524:-
Gas-insulated metal-enclosed
switchgear for rated voltages of
72.5 kV and above
BS 5763:-
Methods for microbiological
examination of food and animal
feeding stuffs
BS 5763-3:1991
Enumeration of coliforms. Most
probable number technique
AW/9
BS 5947:1992
Method of test for static loading of
protective cabs and frames for
agricultural wheeled tractors,
including acceptance conditions
AGE/6
BS 6331:-
Mounting dimensions of single rod
double acting hydraulic cylinders
BS 6331-4:1985
Specification for 63 bar series,
including associated components
MCE/18
BS 6413:-
Lubricants, industrial oils and
related products (class L)
BS 6413-5:1988
Classification for family T (turbines)
PTI/7
BS 6444:-
Cardiovascular implants
BS 6444-1:1990
Methods of test for heart valve
substitutes and requirements for
their packaging and labelling
CH/150/2
BS 7087:-
Herbs and spices ready for food
use
BS 7087-11:1996
Specification for ground paprika
AW/7
BS 7208:-
Contact lenses
BS 7208-9:-
Optics and optical instruments.
Determination of strains for rigid
contact lenses
BS 7690:1993
Test methods for induction channel
furnaces
PEL/27
BS 7691:1994
Methods for testing resistance to
environmental conditions of
electronic equipment used in
agriculture and horticulture
AGE/6
BS 7777:-
Flat-bottomed, vertical, cylindrical
storage tanks for low temperature
service
BS 7777-1:1993
Guide to the general provisions
applying for design, construction,
installation and operation
PVE/15
BS 7777-2:1993
Specification for the design and
construction of single, double and
full containment metal tanks for the
storage of liquefied gas at
temperatures down to -165$0DC
PVE/15
BS 7777-3:1993
Recommendations for the design
and construction of prestressed
and reinforced concrete tanks and
tank foundations, and for the
design and installation of tank
insulation, tank liners and tank
coatings
PVE/15
BS EN 725:-
Advanced technical ceramics.
Methods of test for ceramic
powders
BS EN 725-6:1996
Determination of the specific
surface area
RPI/13
BS EN 725-7:1996
Determination of the absolute
density
RPI/13
BS EN 873:1997
Light conveyor belts. Principal
characteristics and applications
PRI/67
BS EN 971:-
Paints and varnishes. Terms and
definitions for coating materials
BS EN 971-1:1996
General terms
STI/11
Page 28 of 71BRITISH STANDARDS WITHDRAWN
BS EN 1637:1999
Light conveyor belts. Test methods
for the measurement of the
electrical resistances
PRI/67
BS EN 1718:1999
Light conveyor belts. Test method
for the measurement of the
electrostatic field generated by a
running light conveyor belt
PRI/67
BS EN 1722:1999
Light conveyor belts. Test method
for the determination of the
maximum tensile strength
PRI/67
BS EN 1723:2000
Light conveyor belts. Method of
test for the determination of the
relaxed elastic modulus
PRI/67
BS EN 1724:1999
Light conveyor belts. Test method
for the determination of the
coefficient of friction
PRI/67
BS EN ISO 9340:1999
(BS 7208-9:1999)
Optics and optical instruments.
Contact lenses. Determination of
strains for rigid contact lenses
MCE/18
BS EN 12006:-
Non-active surgical implants.
Particular requirements for cardiac
and vascular implants
BS EN 12006-1:1999
Heart valve substitutes
CH/150/2
BS EN ISO 21269:2004
Hexagon socket head cap screws
with metric fine pitch thread
FME/9/3
BS EN 29333:1992
Specification for dental brazing
materials
CH/106/2
BS EN 60298:1996
A.C. metal-enclosed switchgear
and controlgear for rated voltages
above 1 kV and up to and including
52 kV
PEL/17/1
BS EN 60517:1997
(BS 5524:1992)
Gas-insulated metal-enclosed
switchgear for rated voltages of
72.5 kV and above
PEL/17/1
BS EN 60646:1999
Test methods for crucible induction
furnaces
PEL/27
BS EN 60947:-
Specification for low-voltage
switchgear and controlgear
BS EN 60947-5-1:1998
Control circuit devices and
switching elements.
Electromechanical control circuit
devices
PEL/17/2
DD ENV 61111:2002
Matting of insulating material for
electrical purposes
PEL/78
DD ENV 61112:2002
Blankets of insulating material for
electrical purposes
PEL/78
BS EN 61300:-
Fibre optic interconnecting devices
and passive components. Basic
test and measurement procedures
BS EN 61300-2:-
Tests
BS EN 61300-2-3:1997
Static shear load
GEL/86/2
BS EN 61300-2-20:1997
Climatic sequence
GEL/86/2
BS EN 61300-2-31:1997
Nuclear radiation
GEL/86
BS ISO/IEC 13250:2000
Information technology. SGML
applications. Topic maps
IST/41
BS ISO/IEC 14496:-
Information technology. Coding of
audio-visual objects
BS ISO/IEC 14496-16:2004
Animation framework extension
(AFX)
IST/37
BS IEC 60050:-
International electrotechnical
vocabulary
BS IEC 60050-351:1998
Automatic control
GEL/1
Page 29 of 71BRITISH STANDARDS WITHDRAWN
PD 6534:1993
Guide to the use in the UK of DD
ENV 206:1992. Concrete.
Performance, production, placing
and compliance criteria
B/517/1
BRITISH STANDARDS UNDER
REVIEWBS 4607:-
Non-metallic conduits and fittings
for electrical installations
BS 4607-5:1982
Specification for rigid conduits,
fittings and components of
insulating material
PEL/213
BS EN 1369:1997
Founding. Magnetic particle
inspection
ISE/NFE/9
BS EN 1370:1997
Founding. Surface roughness
inspection by visual tactile
comparators
ISE/NFE/9
BS EN 1754:1997
Magnesium and magnesium alloys.
Magnesium and magnesium alloy
anodes, ingots and castings.
Designation system
NFE/35
BS EN ISO 4516:2002
Metallic and other inorganic
coatings. Vickers and Knoop
microhardness tests
STI/33
NEW WORK STARTED
BS 2975:-
Sampling and analysis of glass
making sands
BS 2975-2
Methods for chemical analysis
will partially supersede BS 2975:1988
LBI/36/5
BS 3108:-
Sampling and analysis of glass
making limestone and dolomite
BS 3108-1 (Revision)
Specification, methods for
sampling and physical testing
will supersede BS 3108:1980
LBI/36/1
BS 3108-2 (Revision)
Methods for chemical analysis
will supersede BS 3108:1980
LBI/36/1
BS 5335:-
Specification for quilts
BS 5335-1:1991/Amendment 1
Quilts with fillings other than
feather and or down
TCI/66
BS 5444 (Revision)
Recommendations for preparation
of copy for microcopying
will supersede BS 5444:1977
IDT/1
BS 6105:-
Blanks for superabrasive
cutting-off wheels
BS 7273:-
Code of practice for the operation
of fire protection measures
BS 7273-3 (Revision)
Electrical actuation of pre-action
water mist and sprinkler systems
will supersede BS 7273-3:2000
FSH/12/4
BS 7273-5
Electrical actuation of water mist
systems
FSH/12/4
BS 7858:2006/Amendment 1
Security screening of individuals
employed in a security
environment. Code of practice
GW/3
BS 9004
Gas meter box. Specification
GSE/25
DD XXXX
Safety requirements for electrical
equipment rated for use by children
and young people in educational
establishments
EPL/66
BS EN 40:-
Lighting columns
BS EN 40-3-3 (Revision)
Design and verification. Verification
by calculation
will supersede BS EN 40-3-3:2003
B/509/50
BS EN 338 (Revision)
Structural timber. Strength classes
will supersede BS EN 338:2003
B/518
BS EN 384 (Revision)
Structural timber. Determination of
characteristic values of mechanical
properties and density
will supersede BS EN 384:2004
B/518
Page 30 of 71NEW WORK STARTED
BS EN 408 (Revision)
Timber structures. Structural
timber and glued laminated timber.
Determination of some physical
and mechanical properties
will supersede BS EN 408:2003
B/518
BS EN 543:2003/Corrigendum
Adhesives. Determination of
apparent density of powder and
granule adhesives
PRI/52
BS EN ISO 661:2005/Corrigendum
Animal and vegetable fats and oils.
Preparation of test sample
AW/307
DD CEN/TS 1187 (Revision)
Test methods for external fire
exposure to roofs
will supersede DD ENV 1187:2002
FSH/22/8
BS EN 1194 (Revision)
Timber structures. Glued laminated
timber. Strength classes and
determination of characteristic
values
will supersede BS EN 1194:1999
B/518
BS EN 1382 (Revision)
Timber structures. Test methods.
Withdrawal capacity of timber
fasteners
will supersede BS EN 1382:1999
B/518
BS EN 1383 (Revision)
Timber structures. Test methods.
Pull through resistance of timber
fasteners
will supersede BS EN 1383:1999
B/518
BS EN 3155:-
Aerospace series. Electrical
contacts used in elements of
connection
BS EN 3155-005:2006/Corrigendum
Contacts, electrical, female, type A,
crimp, class T. Product standard
ACE/6/-/3
BS EN 4496:2005/Corrigendum
Aerospace series. Screws, 100$0D
countersunk normal head, offset
cruciform recess, close tolerance
normal shank, short thread, in
titanium alloy, anodized, with
aluminium pigmented coating.
Classification: 1 100MPa (at
ambient temperature) / 315$0DC
ACE/12
BS EN ISO 10993:-
Biological evaluation of medical
devices
BS EN ISO 10993-5 (Revision)
Tests for in vitro cytotoxicity
will supersede BS EN ISO
10993-5:1999CH/194
BS EN 12369:-
Wood-based panels. Characteristic
values for structural design
BS EN 12369-3
Solid-wood panels
B/541
BS EN 12392 (Revision)
Aluminium and aluminium alloys.
Wrought and cast materials.
Special requirements for materials
intended for pressure purposes
will supersede BS EN 12392:2000
NFE/35
BS EN 12737:2004/Amendment 1
Precast concrete products. Floor
slats for livestock
B/524
BS EN 12790 (Revision)
Child use and care articles.
Reclined cradles
will supersede BS EN 12790:2002
CW/41
BS EN 13203:-
Solar supported gas-fired domestic
appliances producing hot water.
Appliances not exceeding 70kW
heat input and 500 litres water
storage capacity
BS EN 13203-3
Assessment of energy
consumption
GSE/29
BS EN 13225
Precast concrete products. Linear
structural elements
B/524
BS EN 13353 (Revision)
Solid wood panels (SWP).
Requirements
will supersede BS EN 13353:2003
B/541
BS EN 13354 (Revision)
Solid wood panels. Bonding
quality. Test method
will supersede DD CEN/TS
13354:2003B/541
BS EN 13369
Common rules for precast concrete
products
B/524
Page 31 of 71NEW WORK STARTED
BS EN 13566:-
Plastics piping systems for
renovation of underground
non-pressure drainage and
sewerage networks
BS EN 13566-3:2002/Amendment 1
Lining with close-fit pipes
PRI/88/3
BS EN ISO 13628:-
Petroleum and natural gas
industries. Design and operation of
subsea production systems
BS EN ISO
13628-1:2005/Amendment 1
General requirements and
recommendations
PSE/17/-/4
BS EN 13747
Precast concrete products. Floor
plates for floor systems
B/524
BS EN ISO 13855
Safety of machinery. The
positioning of protective equipment
in respect of approach speeds of
parts of the human body
will supersede BS EN 999:1999
MCE/3
BS EN 14175:-
Fume cupboards
BS EN 14175-1
Vocabulary
LBI/18
BS EN 14175-2
Safety and performance
requirements
LBI/18
BS EN 14250 (Revision)
Timber structures. Product
requirements for prefabricated
structural members assembled
with punched metal plate fasteners
will supersede BS EN 14250:2004
B/518
BS EN 14354
Wood-based panels. Wood veneer
floor covering
B/541
BS EN 14647
Calcium aluminate cement.
composition, specification and
conformity criteria
B/516/6
BS EN 14648
Building hardware. Fittings for
shutters. Requirements and test
methods
B/538
BS EN 14651:2005/Amendment 1
Test method for metallic fibered
concrete. Measuring the flexural
tensile strength (limit or
proportionality (LOP), residual)
B/524
BS EN 14721:2005/Amendment 1
Test method for metallic fibre
concrete. Measuring the fibre
content in fresh and hardened
concrete
B/524
DD CEN/TS 15643:-
Sustainability of construction
works. Framework for assessment
of integrated building performance
DD CEN/TS 15643-1
Environmental, health and comfort
and life cycle cost performances
B/558
BS EN ISO 21809:-
Petroleum and natural gas
industries. External coatings for
buried and submerged pipelines
used in pipeline transportation
systems
BS EN ISO 21809-5
External concrete coatings
PSE/17/2
BS EN ISO 23251 (Revision)
Petroleum, petrochemical and
natural gas industries.
Pressure-relieving and
depressuring systems
will supersede BS ISO 23251:2006
PSE/17/-/6
BS EN 50122:-
Railway applications. Fixed
installations. Electrical safety,
earthing and bonding
BS EN 50122-1 (Revision)
Protective provisions relating to
electrical safety and earthing
will supersede BS EN 50122-1:1998
GEL/9/3
BS EN 60352:-
Solderless connections
BS EN 60352-8
Compression mount connections.
General requirements, test
methods and practical guidance
EPL/48
BS EN 60512:-
Connectors for electronic
equipment. Tests and
measurements
Page 32 of 71NEW WORK STARTED
BS EN 60512-9-3:2006/Corrigendum
Endurance tests. Test 9c:
Mechanical operation
(engaging/separating) with
electrical load
EPL/48
BS EN 60512-12:-
Soldering tests
BS EN
60512-12-2:2006/Corrigendum
Test 12b: Solderability, wetting,
soldering iron method
EPL/48
BS EN
60512-12-3:2006/Corrigendum
Test 12c: Solderability, de-wetting
EPL/48
BS EN
60512-12-4:2006/Corrigendum
Test 12d: Resistance to soldering
heat, solder bath method
EPL/48
BS EN
60512-12-5:2006/Corrigendum
Test 12e: Resistance to soldering
heat, soldering iron method
EPL/48
BS EN 60601:-
Medical electrical equipment
BS EN 60601-1-8
General requirements for safety.
Collateral standard. General
requirements, tests and guidance
for alarm systems in medical
electrical equipment and medical
electrical systems
CH/62/1
BS EN 61338:-
Waveguide type dielectric
resonators
BS EN 61338-1-4:2006/Corrigendum
General information and test
conditions. Measurement method
of complex relative permittivity for
dielectric resonator materials at
millimetre-wave frequency
EPL/49
BS EN 61391:-
Ultrasonics. Pulse echo scanners
BS EN 61391-2
Techniques for measurement of
maximum depth of visualization
and d the displayed dynamic range
EPL/87
BS EN 61557:-
Electrical safety in low voltage
distribution systems up to 1000 V
A.C. and 1500 V D.C. Equipment
for testing, measuring or
monitoring of protective measures
BS EN 61557-11
Effectiveness of residual current
monitors (RCMs) type A and type
B in TT, TN and IT systems
PEL/85
BS EN 61892:-
Mobile and fixed offshore units.
Electrical installations
BS EN 61892-3
Equipment
will supersede BS IEC 61892-3:1999
JPEL/18
BS EN 61892-6
Installation
will supersede BS IEC 61892-6:1999
JPEL/18
BS EN 61892-7
Hazardous areas
will supersede BS IEC 61892-7:1997
JPEL/18
BS EN 62431
Measurement methods for
reflectivity of electromagnetic wave
absorbers in millimetre wave
frequency
will supersede DD IEC/PAS
62431:2005EPL/46/2
BS EN ISO XXXXX
Performance testing of safety
devices against excessive
pressure
PVE/12
BS EN 00124095
Timber structures. Test methods.
Torsional strength and resistance
to driving of screws
B/518
BS EN 00124096
Timber structures. Test methods.
Withdrawal capacity of punched
metal plate fasteners
B/518
BS ISO 1922
Rigid cellular plastic. Determination
of shear strength
PRI/72
BS ISO 4378:-
Plain bearings. Terms, definitions,
classification and symbols
BS ISO 4378-1
Design, bearing materials and their
properties
MCE/12
Page 33 of 71NEW WORK STARTED
BS ISO 4378-2
Friction and wear
MCE/12
BS ISO 4378-3
Lubrication
MCE/12
BS ISO 4869:-
Acoustics. Hearing protectors
BS ISO 4869-2:1995/Corrigendum
Estimation of effective A-weighted
sound pressure levels when
hearing protectors are worn
PH/7
BS ISO 6104:2005/Corrigendum
Superabrasive products. Rotating
grinding tools with diamond or
cubic boron nitride. General
survey, designation and
multilingual nomenclature
MTE/13
BS ISO 6105-1:2004/Corrigendum
Manually guided cutting-off in
building and civil engineering
MTE/13
BS ISO 6105-2:2004/Corrigendum
Hand-held cutting-off in building
and civil engineering
MTE/13
BS ISO 7590
Steel cord conveyor belts. Methods
for the determination of total
thickness and cover thickness
PRI/67
BS ISO 8611:-
Pallets for materials handling. Flat
pallets
BS ISO 8611-1
Test methods
PKW/0
DD ISO/TS 8611-2
Performance requirements and
selection of tests for flat pallets
PKW/0
DD ISO/TS 8611-3
Maximum working load
PKW/0
BS ISO XXXX
Determination of the emission of
semi-volatile organic compounds
for building products. Micro
chamber method
EH/2/3
DD ISO/TS 12032
Document imaging. Statistical
sampling for document images
IDT/1/2
BS ISO 12776
Pallets. Slip sheets
PKW/0
BS ISO 14717
Oil of origanum, Spanish type
[Coridothymus capitatus (L.) Rchb.
f. syn.thymus capitatus (L.)
Haffmanns. & Link]
AW/54
BS EN ISO 14890:2003/Corrigendum
Conveyor belts. Specification for
rubber or plastics covered
conveyor belts of textile
construction for general use
PRI/67
BS ISO 16345
Cooling towers. Testing and rating
for performance
RHE/17
BS ISO/IEC 18004:-
Information technology.
Radio-frequency identification for
item management
BS ISO/IEC 18004-4 (Revision)
Parameters for air interface
communications at 2, 45 GHz
will supersede BS ISO/IEC
18004:2000IST/34
BS ISO 18549:-
Metallic powders. Determination of
apparent density and flow rate at
elevated temperatures
BS ISO 18549-1
Determination of apparent density
at elevated temperatures
ISE/65
BS ISO/IEC 20000:-
Information technology. Service
management
BS ISO/IEC 20000-3
Guide on compliance with ISO/IEC
20000-1
IST/15/-/8
BS ISO 21549:-
Health informatics: patient
healthcard data
BS ISO 21549-8
Links
IST/35
BS ISO 22006
Quality management systems.
Guidelines for the application of
ISO 9001:2000 in crop production
AW/90
Page 34 of 71NEW WORK STARTED
BS ISO 22178
Intelligent transport systems. Low
speed following systems.
Performance requirements and test
procedures
EPL/278
BS ISO 26910:-
Springs. Shot peening
BS ISO 26910-1
General procedures
GME/15
BS ISO 27547:-
Plastics. Preparation of test
specimens of thermoplastic
materials using mouldless
technologies
BS ISO 27547-1
General principles, and
laser-sintering of specimens
PRI/82
BS ISO TS 28479
Crop protection equipment.
Substitute materials for testing
AGE/15
BS ISO 28981
Mopeds. Methods for setting the
running resistance on a chassis
dynamometer
AUE/14
DD IEC/TS 60479:-
Effects of current on human beings
and livestock
DD IEC/TS
60479-1:2005/Corrigendum
General aspects
JPEL/64
BS IEC 60919:-
Performance of high-voltage D.C.
(HVDC) systems
BS IEC 60919-2
Faults and switching
PEL/22
DD IEC/TS 62239 (Revision)
Process management for avionics.
Preparation of an electronic
components management plan
will supersede DD IEC/TS 62239:2003
GEL/107
PD CEN/TR 14383:-
Prevention of urban planning by
urban planning and building design
PD CEN/TR 14383-2
Urban planning
will supersede DD ENV 14383-2:2003
B/562
PD ISO/TR 28118
Information and documentation.
Performance indicators for national
libraries
IDT/2/15
PD IEC/TR IEC 61946
Mineral insulating oils.
Characterisation of the paraffinic /
naphthenic nature by low
temperature differential scanning
calorimetry. Test method
GEL/10
PAS 911
Fire strategies for businesses.
Guidance and framework for their
formulation
ZZ/1
DRAFT BRITISH STANDARDS
FOR PUBLIC COMMENT
06/30058730 DC
ISO 12651 Electronic imaging.
Vocabulary
IDT/1/3
06/30111445 DC
BS ISO 369 Machine tools.
Symbols for indications appearing
on machine tools
MTE/1
06/30112041 DC
EN ISO 9241-304 Ergonomics of
human-system interaction. Part
304. User performance test
methods
PH/9
06/30117301 DC
ISO 16754 Earth-moving
machinery. Determination of
ground contact pressure. Crawler
machines
B/513/1
06/30125306 DC
EN 15609 LPG equipment and
accessories. LPG propulsion
systems for boats, yachts and
other craft. Installation
requirements
PVE/19
06/30126364 DC
IEC 80000-14 Quantities and units.
Part 14. Telebiometrics related to
human physiology
SS/7
06/30128759 DC
BS ISO 15086-3 Hydraulic fluid
power. Determination of the
fluid-borne noise characteristics of
components and systems. Part 3.
Measurement of hydraulic
impedance
MCE/18/-/8
Page 35 of 71DRAFT BRITISH STANDARDS FOR PUBLIC COMMENT
06/30133574 DC
BS 5979 Code of practice for
remote centres receiving signals
from security systems
GW/1/11
06/30135901 DC
ISO 14132-5 Optics and photonics.
Vocabulary for telescopic systems.
Part 5. Terms for night vision
systems
CPW/172
06/30137137 DC
ISO 11992-3 AMD1 Road vehicles.
Interchange of digital information
on electrical connections between
towing and towed vehicles. Part 3.
Application layer for equipment
other than brakes and running gear
AUE/16
06/30137313 DC
ISO/IEC 81060-1 Non-invasive
sphygmomanometers. Part 1.
Requirements and test methods for
mechanical type
CH/62/4
06/30138756 DC
ISO 12620 Terminology and other
content and language resources.
Data categories. Specification of
data categories and management
of a data category registry for
language resources
TS/1
06/30139418 DC
EN 15602 Security service
providers. Terminology
GW/3
06/30141785 DC
ISO 4918 Resilient, textile and
laminate floor coverings. Castor
chair test
PRI/60
06/30141790 DC
BS ISO 10245-1 Cranes. Limiting
and indicating devices. Part 1.
General
MHE/3
06/30144982 DC
EN 1301-1 Aluminium and
aluminium alloys. Drawn wire. Part
1. Technical conditions for
inspection and delivery
NFE/35
06/30144985 DC
EN 1301-2 Aluminium and
aluminium alloys. Drawn wire. Part
2. Mechanical properties
NFE/35
06/30144988 DC
EN 1301-3 Aluminium and
aluminium alloys. Drawn wire. Part
3. Tolerances on dimensions
NFE/35
06/30145817 DC
BS ISO 23499 Coal. Determination
of bulk density
PTI/16
06/30145835 DC
BS ISO 10329 Coal. Determination
of plastic properties.
Constant-torque Giessler
plastometer method
PTI/16
06/30146339 DC
ISO 16000-16 Indoor air. Part 16.
Detection and enumeration of
moulds. Sampling by filtration
EH/2/3
06/30146347 DC
ISO 16000-17 Indoor air. Part 17.
Detection and enumeration of
moulds. Culture-based method
EH/2/3
06/30146511 DC
BS ISO 18113-1 Clinical laboratory
testing and in vitro diagnostic
medical systems. Information
supplied by the manufacturer
(labelling). Part 1. Terms,
definitions and general
requirements
CH/212
06/30146515 DC
BS ISO 18113-2 Clinical laboratory
testing and in vitro diagnostic
medical systems. Information
supplied by the manufacturer
(labelling). Part 2. In vitro
diagnostic reagents for
professional use
CH/212
06/30146518 DC
BS ISO 18113-3 Clinical laboratory
testing and in vitro diagnostic
medical systems. Information
supplied by the manufacturer
(labelling). Part 3. In vitro
diagnostic instruments for
professional use
CH/212
06/30146522 DC
BS ISO 18113-4 Clinical laboratory
testing and in vitro diagnostic
medical systems. Information
supplied by the manufacturer
(labelling). Part 4. In vitro
diagnostic reagents for self-testing
CH/212
06/30146526 DC
BS ISO 18113-5 Clinical laboratory
testing and in vitro diagnostic
medical systems. Information
supplied by the manufacturer
(labelling). Part 5. In vitro
diagnostic instruments for
self-testing
CH/212
Page 36 of 71DRAFT BRITISH STANDARDS FOR PUBLIC COMMENT
06/30147281 DC
BS 7499 Static site guarding and
mobile patrol services. Code of
practice
GW/3
06/30148066 DC
BS 8487 Design and construction
of gas boosters used in association
with combustion equipment.
Specification
GSE/33
06/30148102 DC
ISO/IEC 15420 Information
technology. Automatic identification
and data capture techniques.
EAN/UPC bar code symbology
specification
IST/34
06/30148192 DC
BS EN 61169-4:2007
Radio-frequency connectors. Part
4. R.F. coaxial connectors with
inner diameter of outer conductor
16 mm (0.63 in) with screw lock.
Characteristic impedance 50 ohms
(Type 7-16)
EPL/46/2
06/30151143 DC
BS ISO 10245-3 Cranes. Limiting
and indicating devices. Part 3.
Tower cranes
MHE/3/5
06/30151146 DC
BS ISO 11660-3 Cranes. Access,
guards and restraints. Part 3.
Tower cranes
MHE/3
06/30151267 DC
BS ISO CD 10840 Plastics.
Guidance for the use of standard
fire tests
PRI/26
06/30151657 DC
BS EN ISO 3452-5 Non-destructive
testing. Penetrant testing. Part 5.
Penetrant testing at temperatures
higher than 50$0DC
WEE/46
06/30151661 DC
BS EN ISO 3452-6 Non-destructive
testing. Penetrant testing. Part 6.
Penetrant testing at temperatures
lower than 10$0DC
WEE/46
06/30151815 DC
BS ISO 898-1 Mechanical
properties of fasteners made of
carbon steel and alloy steel. Part 1.
Bolts, screws and studs
FME/9/1
06/30151927 DC
BS ISO 14744-1 REV Welding.
Acceptance inspection of electron
beam welding machines. Part 1.
Principles and acceptance
conditions
WEE/-/1
06/30153386 DC
BS ISO 6752 Tools for pressing.
Round punches with 60° conical
head and straight shank
MTE/12
06/30153680 DC
BS ISO 27107 Animal and
vegetable fats and oils.
Determination of peroxide value.
Potentiometric end-point
determination
AW/307
06/30154066 DC
BS ISO/IEC 15457-1 Identification
cards. Thin flexible cards. Part 1.
Physical characteristics
IST/17
06/30155256 DC
BS ISO 2597-2 Iron ores.
Determination of total iron content.
Part 2. Titrimetric methods after
titanium (III) chloride reduction
ISE/58
06/30157290 DC
BS ISO 28003 Security
management systems for the
supply chain. Requirements for
bodies providing audit and
certification of supply chain
security management systems
SME/32
06/30157587 DC
BS ISO 28300 Petroleum,
petrochemical and natural gas
industries. Venting of atmospheric
and low-pressure storage tanks
PSE/17/-/6
06/30157864 DC
BS EN 60947-5-1/prA2
Low-voltage switchgear and
controlgear. Part 5-1. Control
circuit devices and switching
elements. Electromechanical
control circuit devices
PEL/17/2
06/30158008 DC
BS EN 3373-014 Aerospace
series. Terminal lugs and in-line
splices for crimping on electric
conductors. Part 014. In-line
splices, insulated and sealed, for
crimping on copper conductors,
temperature up to 200°C. Product
standard
ACE/6/-/8
06/30158501 DC
BS ISO 11660-1 Cranes. Access,
guards and restraints. Part 1.
General
MHE/3
Page 37 of 71DRAFT BRITISH STANDARDS FOR PUBLIC COMMENT
06/30158613 DC
BS EN 15607 Foodstuffs.
Determination of d-biotin by HPLC
AW/-/3
06/30158810 DC
BS EN 1474-2 Installation and
equipment for liquefied natural gas.
Design and testing of marine
transfer systems. Part 2. Design
and testing of transfer hoses
FSH/18/3
06/30158813 DC
BS EN 1474-3 Installation and
equipment for liquefied natural gas.
Design and testing of marine
transfer systems. Part 3. Offshore
transfer systems
FSH/18/3
06/30158897 DC
BS EN 15606 Foodstuffs.
Determination of acesulfame-K,
aspartame,
neohesperidinedihydrochalcone
and saccharin. High performance
liquid chromatographic method
AW/-/3
06/30158977 DC
BS EN 1124-3 Pipes and fittings of
longitudinally welded stainless
steel pipes with spigot and socket
for waste water systems. Part 3.
System X. Dimensions
ISE/8
06/30159042 DC
BS EN 14349 Chemical
disinfectants and antiseptics.
Quantitative surface test for the
evaluation of bactericidal activity of
chemical disinfectants and
antiseptics used in veterinary area
on non-porous surfaces without
mechanical action. Test method
and requirements (phase 2, step 2)
CH/216
06/30159143 DC
BS EN 15608 Surface active
agents. Quantitative determination
of free fatty acid in
alkylamidopropylbetaines.
Gas-chromatographic method
CII/34
06/30159238 DC
BS EN 61549/prA2 Miscellaneous
lamps
CPL/34/1
06/30159274 DC
BS EN 80601-2-30 Medical
electrical equipment. Part 2-30.
Particular requirements for basic
safety and essential performance
of automated type non-invasive
sphygmomanometers
CH/62/4
06/30159293 DC
BS EN 15597-1 Winter
maintenance equipment.
Spreading machines (gritting
machines). Part 1. Requirements
on dosage and on static test on
dosage
B/513
06/30159311 DC
BS EN 61300-3-13 Fibre optic
interconnecting devices and
passive components. Basic test
and measurement procedures.
Part 3-13. Examinations and
measurements. Control stability of
a fibre optic switch
GEL/86/2
06/30159323 DC
BS EN 61300-3-9 Fibre optic
interconnecting devices and
passive components. Basic test
and measurement procedures.
Part 3-9. Examinations and
measurements. Crosstalk
GEL/86/2
06/30159347 DC
BS EN 62148-11 Fibre optic active
components and devices. Package
and interface standards. Part 11.
14-pin pump lasers and
modulator-integrated laser
transmitters
GEL/86/3
06/30159355 DC
BS EN 61753-085-2 Fibre optic
interconnecting devices and
passive components performance
standard. Part 085-2.
Non-connectorised single-mode
pigtailed CWDM devices for
category C-controlled environment
GEL/86/2
06/30159359 DC
BS EN 60255-22-1 Measuring
relays and protection equipment.
Part 22-1. Electrical disturbance
tests for measuring relays and
protection equipment. 1 MHz burst
immunity tests
PEL/95
06/30159382 DC
BS ISO 16484-5 Building
automation and control systems.
Part 5. Data communication
protocol
£40.00 members, £80.00
non-membersRHE/2
06/30159392 DC
BS EN 1506 Ventilation for
buildings. Sheet metal air ducts
and fittings with circular
cross-section. Dimensions
RHE/2
Page 38 of 71DRAFT BRITISH STANDARDS FOR PUBLIC COMMENT
06/30159403 DC
BS EN 60450/prA1 Measurement
of the average viscometric degree
of polymerization of new and aged
cellulosic electrically insulating
materials
GEL/112
06/30159429 DC
BS EN 60745-2-19/prA1 Hand-held
motor-operated electric tools.
Safety. Part 2-19. Particular
requirements for jointers
CPL/61/6
06/30159436 DC
EN 15303-1 Design and
application of plasterboard systems
on frames. Part 1. General
B/544/3
06/30159524 DC
BS EN ISO 12625-10 Tissue paper
and tissue products. Part 10.
Determination of demand water
absorption rate and capacity, under
controlled hydraulic pressure
PAI/11
06/30159543 DC
BS EN ISO 21068-1 Chemical
analysis of silicon carbide
containing raw materials and
refractory products. Part 1.
General information and sample
preparation
RPI/1
06/30159547 DC
BS EN ISO 21068-2 Chemical
analysis of silicon carbide
containing raw materials and
refractory products. Part 2.
Determination of loss on ignition,
total carbon, free carbon and
silicon carbide, total and free silica
and total and free silicon
RPI/1
06/30159551 DC
BS EN ISO 21068-3 Chemical
analysis of silicon carbide
containing raw materials and
refractory products. Part 3.
Determination of nitrogen, oxygen
and metallic and oxidic
constituents
RPI/1
06/30159593 DC
BS ISO/IEC 15457-3 Identification
cards. Thin flexible cards. Part 3.
Test methods
IST/17
06/30159628 DC
BS EN 60268-5/prA1 Sound
system equipment. Part 5.
Loudspeakers
EPL/100
06/30159668 DC
BS EN 50508 Multi-purpose
insulating sticks for electrical
operations on high voltage
installations
PEL/78
06/30159671 DC
BS EN 13363-1/prA1 Solar
protection devices combined with
glazing. Calculation of solar and
light transmittance. Part 1.
Simplified method
B/540
06/30159694 DC
BS ISO 23601 Safety identification.
Escape plan signs
PH/8/1
06/30159746 DC
BS EN 50503 Fluids for
electrotechnical applications.
Standard for the inventory control,
management, decontamination
and/or disposal of electrical
equipment and insulating liquids
containing PCBs
GEL/10
06/30159752 DC
BS ISO/IEC 19781-1 Information
technology. Learning, education
and training. Registry. Part 1.
Registry content
IST/43
06/30159756 DC
BS ISO/IEC 19781-2 Information
technology. Learning, education
and training. Registry. Part 2.
Registration authority process
IST/43
06/30159760 DC
BS ISO/IEC 19778-1 Information
technology. Learning, education
and training. Collaborative
workplace. Part 1. Collaborative
workplace data model
IST/43
06/30159763 DC
BS ISO/IEC 19778-2 Information
technology. Learning, education
and training. Collaborative
workplace. Part 2. Collaborative
environment data model
IST/43
06/30159766 DC
BS ISO/IEC 19778-3 Information
technology. Learning, education
and training. Collaborative
technology. Collaborative
workplace. Part 3. Collaborative
group data model
IST/43
Page 39 of 71DRAFT BRITISH STANDARDS FOR PUBLIC COMMENT
06/30159770 DC
BS ISO 2575 AMD5 Road
vehicles. Symbols for controls,
indicators and tell-tales
AUE/12
06/30159843 DC
BS ISO 13680 Petroleum and
natural gas industries. Corrosion.
resistant alloy seamless tubes for
use as casing, tubing and coupling
stock. Technical delivery
conditions
PSE/17/-/5
06/30159940 DC
BS EN 60034-15 Rotating
electrical machines. Part 15.
Impulse voltage withstand levels of
rotating A.C. machines with
form-wound stator coils
PEL/2
06/30159993 DC
BS EN 61373 Railway applications.
Rolling stock equipment. Shock
and vibration tests
GEL/9/2
06/30160003 DC
BS ISO 17712 Freight containers.
Mechanical seals
TW/1
06/30160006 DC
BS EN ISO 11644 Leather. Test for
adhesion of finish
TCI/69
06/30160010 DC
BS EN ISO 3950 Dentistry.
Designation system for teeth and
areas of the oral cavity
CH/106/3
06/30160017 DC
BS ISO 1496-1:1990/DAM 6 Series
1. Freight containers. Specification
and testing. Part 1. General cargo
containers for general purposes.
Amendment 6. Racking test for 45
ft containers
TW/1
06/30160027 DC
BS EN 62055-52 Electricity
metering. payment systems. Part
52. Standard transfer specification
(STS). Physical layer protocol for a
two-way virtual token carrier for
direct local connection
PEL/13
06/30160031 DC
BS ISO 17564 Hydrogenated nitrile
rubber (HNBR). Determination of
residual unsaturation by iodine
value
PRI/23
06/30160034 DC
BS ISO 7781 Styrene-butadiene
rubber, raw. Determination of soap
and organic-acid content
PRI/23
06/30160058 DC
BS EN ISO 8536-4 Infusion
equipment for medical use. Part 4.
Infusion sets for single use, gravity
feed
CH/212
06/30160065 DC
BS EN ISO 11143 ED 2 Dental
equipment. Amalgam separators
CH/106/4
06/30160085 DC
BS ISO 15970 Natural gas.
Measurement of properties.
Volumetric properties. density,
pressure, temperature and
compression factor
PTI/15
06/30160122 DC
ISO/DIS 26603 Plastics. Aromatic
isocyanates for use in the
production of polyurethanes.
Determination of total chlorine
PRI/72/4
06/30160162 DC
BS EN 3155-074 Aerospace
series. Electrical contacts used in
elements of connection. Part 074.
Contacts, electrical, quadrax, size
08, male, type E, crimp, class R.
Product standard
ACE/6/-/3
06/30160165 DC
BS EN 3155-075 Aerospace
series. Electrical contacts used in
elements of connection. Part 075.
Contacts, electrical, quadrax, size
08, female, type E, crimp, class R.
Product standard
ACE/6/-/3
06/30160259 DC
BS ISO 8829-1 Aerospace. Test
methods for polytetrafluoroethylene
(PTFE) innnertube hose
assemblies. Part 1. Metallic
(stainless steel) braid
ACE/69
06/30160262 DC
BS EN 4642 Aerospace series.
Steel FE-PM 3504
(X4CrNiMo16-5-1). Air melted.
Hardened and tempered. Sheet.
0.6 mm $3L a $3L 50 mm. 900
MPa $3L Rm $3L 1 050 Mpa
ACE/61/-/15
Page 40 of 71DRAFT BRITISH STANDARDS FOR PUBLIC COMMENT
06/30160265 DC
BS ISO 21462 Aerospace. Fluid
systems. Geometrical configuration
of flareless acorn. Inch series
ACE/69
06/30160268 DC
BS ISO 21463 Aerospace. Fluid
systems. Geometrical configuration
of bosses, fluid connection, internal
straight threads. Inch series
ACE/69
06/30160271 DC
BS ISO 21464 Aerospace. Fluid
systems. Geometrical configuration
of blunt nose flareless. Inch series
ACE/69
06/30160338 DC
BS EN 50504 Validation of arc
welding equipment
WEE/6
06/30160356 DC
BS EN 60318-4 ED 1
Electroacoustics. Simulators of
human head and ear.
Occluded-ear simulator for the
measurement of earphones
coupled to the ear by insert
EPL/29
06/30160368 DC
BS EN 80100 Basic safety and
essential performance
requirements of clinical
thermometer for body temperature
measurement
CH/121/3
06/30160373 DC
BS EN 60601-2-4 ED 3 Medical
electrical equipment. Particular
requirements for basic safety and
essential performance of cardiac
defibrillators
CH/62/4
06/30160391 DC
BS ISO 5145 AMD 2 Cylinder
valve outlets for gases and gas
mixtures. Selection and
dimensioning
PVE/3
06/30160408 DC
BS EN 60966-2-4 Radio frequency
and coaxial cable assemblies. Part
2-4. Detail specification for cable
assemblies for radio and TV
receivers. Frequency range 0 to 3
000 MHz, IEC 61169-2 connectors
EPL/46
07/30090385 DC
ISO 13408-1 Aseptic processing of
health care products. Part 1.
General requirements
CH/198
07/30117272 DC
BS ISO/IEC 27005 Information
technology. Security techniques.
Information security risk
management
IST/33
07/30125841 DC
IEC 62097 ED 1.0 Hydraulic
machines. Determination of
performance from model
acceptance tests of radial and axial
flow hydraulic machines with
consideration of scale effects
including the effect of surface
roughness
MCE/15
07/30135157 DC
BS ISO/IEC 18014-1 Information
technology. Security techniques.
Time-stamping services. Part 1.
Framework
IST/33
07/30135624 DC
BS ISO/IEC 15946-1 Information
technology. Security techniques.
Cryptographic techniques based
on elliptic curves. Part 1. General
IST/33
07/30142135 DC
BS EN 1012-1 Compressors and
vacuum pumps. Safety
requirements. Part 1. Air
compressors
MCE/8/-/4
07/30143612 DC
BS ISO 8586-2 Sensory analysis.
General guidance for the selection,
training and monitoring of
assessors. Part 2. Expert sensory
assessors
AW/12
07/30145003 DC
EN 1386 Aluminium and aluminium
alloys. Tread plate. Specifications
NFE/35
07/30152595 DC
BS IEC 62024-2 High frequency
inductive components. Electrical
characteristics and measuring
methods. Part 2. Rated current of
inductors for D.C. to D.C. converter
EPL/51
07/30154505 DC
BS 3882 Specification for top soil
AW/20
07/30154860 DC
BS 594987 Hot rolled asphalt for
roads and other paved areas.
Specification for transport, laying
and compaction and design
protocols
B/510/1
Page 41 of 71DRAFT BRITISH STANDARDS FOR PUBLIC COMMENT
07/30158318 DC
BS 4N 100-1 AMD 2 Aircraft
oxygen systems and equipment.
Part 1. Design and installation
ACE/38
07/30159086 DC
BS EN 15616 Copper and copper
alloys. Determination of cadmium
content. Flame atomic absorption
spectrometry method (FAAS)
RHE/19
07/30159715 DC
BS EN 62317-13 Ferrite cores.
Dimensions. Part 13. PQ-cores for
use in power supply applications
EPL/51
07/30160401 DC
BS EN ISO 9994/prA1 Lighters.
Safety specification
CW/32
07/30160560 DC
PD 5500 AMD 2 Specification for
unfired fusion welded pressure
vessels
PVE/1
07/30160561 DC
BS ISO/IEC 12207 Systems and
software engineering. Software life
cycle processes
£18.00 members, £36.00
non-membersIST/15
07/30160564 DC
BS ISO/IEC 15288 Systems and
software engineering. System life
cycle processes
IST/15
07/30160567 DC
BS ISO/IEC 26514 Software and
systems engineering. User
documentation requirements for
documentation designers and
developers
£18.00 members, £36.00
non-membersIST/15
07/30160570 DC
BS EN 61169-24 Radio-frequency
connectors. Part 24. Sectional
specification. Radio frequency
coaxial connectors with screw
coupling, typically for use in 75
ohm cable distribution systems
(type F)
EPL/46/2
07/30160645 DC
BS EN ISO 15378 Primary
packaging materials for medicinal
products. Particular requirements
for the application of ISO
9001:2000, with reference to good
manufacturing practice (GMP)
CH/212
07/30160659 DC
BS EN 62024-1 High frequency
inductive components. Electrical
characteristics and measuring
methods. Part 1. Nanohenry range
chip inductor
EPL/51
DOCUMENTS NOT ISSUED
AS DPCsBS EN 1367:-
Tests for thermal and weathering
properties of aggregates
BS EN 1367-1:1999
Determination of resistance to
freezing and thawing
The text of this draft European
standard was circulated under the
CEN unique acceptance procedure
for approval to publish. Although
the formal consultation period on
the proposal is now closed, a copy
of the text can be made available
on request using document
reference B/502/6.0041/06 from
the Programme Manager (below).
Contact: Ray Kerrigan
Email: [email protected]
B/502/6
BS EN ISO 22610
Surgical drapes, gowns and clear
air suits, used as medical devices,
for patients, clinical staff and
equipment. Test method to
determine the resistance to wet
bacterial penetration
Please note that copies of this text
are available from the Programme
Manager (below).
Contact: Philippa Younas
Email:
[email protected]/62/1
BS EN 61223:-
Evaluation and routine testing in
medical imaging departments
BS EN 61223-3-6
Acceptance tests. Image display
devices
Copies of the text to this standard,
which has been circulated to
CENELEC members as a draft for
enquiry by CENELEC/TC 62, are
available from the Programme
Manager (below).
Contact: Philippa Younas
Email:
[email protected]/62/2
Page 42 of 71DOCUMENTS NOT ISSUED AS DPCs
IEC 61076:-
Connectors for electronic
equipment. Product requirements
IEC 61076-3-117
Rectangular connectors. Protective
housings for use with 8-way
shielded and unshielded
connectors for frequencies up to
1000 MHz for industrial
environments incorporating the
60603-7. Variant 14 related to IEC
61076-3-106. Push pull coupling
This document has been issued at
CD stage to adopt IEC PAS
61076-3-117:2006 as an
international standard. Copies are
available on request from the
contact point (below).
Contact: Committee Service Centre
Email: [email protected]
EPL/48
ISO/DIS 11699:-
Non-destructive testing. Industrial
radiographic film
ISO/DIS 11699-1
Classification of film systems for
industrial radiography
Copies of this document, which is
identical to EN 584-1:2006, are
available from the Programme
Manager (below).
Contact: Anne Hannan
Email: [email protected]
WEE/-/1
ISO/IEC 14496:-
Coding of audio-visual objects
ISO/IEC 14496-4:2004/FPDAM 16
Conformance testing. Amendment
16: MPEG-J GFX conformance
Copies of the text to this standard,
which has been circulated to ISO
members as a final committee draft
by ISO/IEC JTC 1/SC 29, are
available from the Programme
Manager (below) to whom
comments should be submitted by
19 April, 2007.
Contact: Jean Stride
Email: [email protected]
IST/37
ISO/IEC FCD 21000:-
Information technology. Multimedia
framework (MPEG-21)
ISO/IEC FCD 21000-14
Conformance testing
Copies of the text to this standard,
which has been circulated to ISO
members as a final committee draft
by ISO/IEC JTC 1/SC 29, are
available from the Programme
Manager (below) to whom
comments should be submitted by
5 March, 2007.
Contact: Jean Stride
Email: [email protected]
IST/37
ISO/IEC FCD 23001:-
Information technology. MPEG
systems technologies
ISO/IEC FCD 23001-2
Fragment request units
Copies of the text to this standard,
which has been circulated to ISO
members as a final committee draft
by ISO/IEC JTC 1/SC 29, are
available from the Programme
Manager (below) to whom
comments should be submitted by
21 March, 2007.
Contact: Jean Stride
Email: [email protected]
IST/37
CEN/CENELEC UNIQUE
ACCEPTANCE PROCEDUREEN 13454:-
Binders, composite binders and
factory made mixtures for floor
screeds based on calcium sulfate
EN 13454-2:2003/prA1
Test methods
This draft European amendment
makes a modification to clause
4.4.2.1. Please direct any comment
on this proposed change by e-mail
to the Programme Manager
(below) before 31 March, 2007.
Contact: Bernard Williams
Email:
[email protected]/544/1
prEN 1436
Road marking materials. Road
marking performance for road
users
This work failed the CEN formal
vote and this updated draft has
now been issued, for which only
editorial comments will be
considered. Any such comments
should be submitted using the CEN
comment template and e-mailed to
the Programme Manager (below)
before 1 March, 2007.
Contact: Bernard Williams
Email:
[email protected]/509/2
CEN EUROPEAN
STANDARDSEN 3:-
Portable fire extinguishers
EN 3-9:2006
Additional requirements to EN 3-7
for pressure resistance of CO$d2
extinguishers
FSH/2
Page 43 of 71CEN EUROPEAN STANDARDS
EN 30:-
Domestic cooking appliances
burning gas fuel
EN 30-1:-
Safety
EN 30-1-3:-
Appliances having a glass ceramic
hotplate
CORRIGENDUM 1:September 2004
GSE/35
EN 30-1-4:-
Appliances having one or more
burners with an automatic burner
control system
AMENDMENT 1:November 2006
GSE/35
EN 81:-
Safety rules for the construction
and installation of lifts. Particular
applications to passenger lifts and
goods passenger lifts
EN 81-71:-
Vandal resistant lifts
AMENDMENT 1:December 2006
MHE/4
EN 339:2006
Aerospace series. Aluminium alloy
AL-P7010-T76. Die forgings. a $3L
200mm
ACE/61/-/24
EN 420:-
Protective gloves. General
requirements and test methods
CORRIGENDUM:November 2006
PH/3/8
EN 455:-
Medical gloves for single use
EN 455-3:2006
Requirements and testing for
biological evaluation
CH/205/3
EN 474:-
Earth-moving machinery. Safety
EN 474-1:2006
General requirements
B/513/1
EN 474-2:2006
Requirements for tractor-dozers
B/513/1
EN 474-3:2006
Requirements for loaders
B/513/1
EN 474-4:2006
Requirements for backhoe loaders
B/513/1
EN 474-5:2006
Requirements for hydraulic
excavators
B/513/1
EN 474-6:2006
Requirements for dumpers
B/513/1
EN 474-7:2006
Requirements for scrapers
B/513/1
EN 474-8:2006
Requirements for graders
B/513/1
EN 474-9:2006
Requirements for pipelayers
B/513/1
EN 474-10:2006
Requirements for trenchers
B/513/1
EN 474-11:2006
Requirements for earth and landfill
compactors
B/513/1
EN 474-12:2006
Requirements for cable excavators
B/513/1
EN 565:2006
Mountaineering. Tape. Safety
requirements and test methods
SW/136/5
EN 566:2006
Mountaineering. Slings. Safety
requirements and test methods
SW/136/5
EN 843:-
Advanced technical ceramics.
Monolithic ceramics. Mechanical
properties at room temperature
EN 843-1:2006
Determination of flexural strength
RPI/13
EN 843-2:2006
Determination of Young's modulus,
shear modulus and Poisson's ratio
RPI/13
EN 843-3:2005
Determination of subcritical crack
growth parameters from constant
stressing rate flexural strength
tests
RPI/13
Page 44 of 71CEN EUROPEAN STANDARDS
EN 843-4:2005
Vickers, Knoop and Rockwell
superficial hardness
RPI/13
EN 843-5:2006
Statistical analysis
RPI/13
EN 927:-
Paints and varnishes. Coating
materials and coating systems for
exterior wood
EN 927-3:2006
Natural weathering test
STI/28
EN 927-5:2006
Assessment of the liquid water
permeability
STI/28
EN 958:2006
Mountaineering. Energy absorbing
systems for use in kletter-steig (via
ferrata) climbing. Safety
requirements and test methods
SW/136/5
EN 997:-
WC pans with integral trap
AMENDMENT 1:December 2006
B/503
EN 1015:-
Methods of test for mortar for
masonry
EN 1015-1:-
Determination of particle size
distribution (by sieve analysis)
AMENDMENT 1:December 2006
B/519/2
EN 1015-2:-
Bulk sampling of mortars and
preparation of test mortars
AMENDMENT 1:December 2006
B/519/2
EN 1015-3:-
Determination of consistence of
fresh mortar (by flow table)
AMENDMENT 2:December 2006
B/519/2
EN 1015-6:-
Determination of bulk density of
fresh mortar
AMENDMENT 1:December 2006
B/519/2
EN 1015-9:-
Determination of workable life and
correction time of fresh mortar
AMENDMENT 1:December 2006
B/519/2
EN 1015-10:-
Determination of dry bulk density of
hardened mortar
AMENDMENT 1:December 2006
B/519/2
EN 1015-11:-
Determination of flexural and
compressive strength of hardened
mortar
AMENDMENT 1:December 2006
B/519/2
EN 1093:-
Safety of machinery. Evaluation of
the emission of airborne hazardous
substances
EN 1093-2:2006
Tracer method for assessing the
emission rate of a specified
pollutant
MCE/3
EN 1093-3:2006
Bench test method for the
measurement of the emission rate
of a specified pollutant
MCE/3
EN 1634:-
Fire resistance and smoke control
tests for door and shutter
assemblies, openable windows
and elements of building hardware
EN 1634-1:-
Fire resistance test for doors and
shutter assemblies and openable
windows
CORRIGENDUM:November 2006
FSH/22
EN 2947:2006
Aerospace series. Steel
FE-PA3004 (X10CrNi18-09). Air
melted. Non heat treated. Cold
drawn wire. A or D $3L 2,3 mm
ACE/61/-/15
EN 3114:-
Aerospace series. Microstructure
of (alpha + beta) titanium alloy
products
EN 3114-001:2006
General requirements
ACE/61/-/49
EN 3114-003:2006
Microstructure of plate
ACE/61/-/49
EN 3114-004:2006
Microstructure of sheet for
superplastic forming
ACE/61/-/49
EN 3155:-
Aerospace series. Electrical
contacts used in elements of
connection
Page 45 of 71CEN EUROPEAN STANDARDS
EN 3155-005:2006
Contacts, electrical, female, type A,
crimp, class T. Product standard
ACE/6/-/3
EN 3155-005:-
Contacts, electrical, female, type A,
crimp, class T. Product standard
CORRIGENDUM 1:December 2006
ACE/6/-/3
EN 3375:-
Aerospace series. Cable, electrical,
for digital data transmission
EN 3375-006:2006
Single braid. 78 Ohms. Type XM.
Product standard
ACE/6/-/2
EN 3375-007:2006
Double braid. 77 Ohms. Type WW.
Product standard
ACE/6/-/2
EN 3491:2006
Aerospace series. Steel
FE-PM3901 (X15CrNi17-3). Air
melted. Hardened and tempered.
Forgings. De $3L 100 mm. 900
MPa $3L Rm $3L 1 100 MPa
ACE/61/-/15
EN 3507:2006
Aerospace series. Steel
FE-PL1501 (30CrMo12). Air
melted. Hardened and tempered.
Forgings. De $3L 100 mm. 930
MPa $3L Rm $3L 1080 MPa
ACE/61/-/15
EN 3668:2006
Aerospace series. Heat resisting
alloy NI-PH2301
(NiCr21Fe18Mo9). Non heat
treated. Forging stock. a or D $3L
250mm
ACE/61/-/48
EN 3716:-
Aerospace series. Connector,
single-way with triaxial interface,
for transmission of digital data
EN 3716-006:2006
Crimp plug. Product standard
ACE/6/-/3
EN 3816:2006
Aerospace series. Steel
FE-PA3601 (X6CrNiT118-10). Air
melted. Softened and cold rolled.
Sheet and strip. a $3L 3 mm. Rm
$3M 800 MPa
ACE/61/-/15
EN 3969:2006
Aerospace series. Steel
FE-PL1507 (40CrMoV12). Air
melted. Annealed. Forging stock. a
or D $3L 350 mm
ACE/61/-/15
EN 3971:2006
Aerospace series. Steel FE-P1507
(40CrMoV12). Consumable
electrode remelted. Annealed.
Forging stock. a or D $3L 350 mm
ACE/61/-/15
EN 3972:2006
Aerospace series. Steel
FE-PL1507 (40CrMoV12).
Consumable electrode remelted.
Hardened and tempered. Bar for
machining. De $3L 50 mm. 1 250
MPa $3L Rm $3L 1 400 MPa
ACE/61/-/15
EN 3973:2006
Aerospace series. Steel
FE-CM3801 (X5CrNiCuNb16-4).
Homogenised, solution treated and
precipitation hardened. Investment
casting. De $3L 50 mm. Rm $3M 1
030 Mpa
ACE/61/-/15
EN 3976:2006
Aerospace series. Titanium and
titanium alloys. Test method.
Chemical analysis for the
determination of hydrogen content
ACE/61/-/49
EN 4003:2006
Aerospace series. Aluminium alloy
AL-P2220-T88. Sheet and strip.
0,5 mm $3L a $3L 6 mm
ACE/61/-/24
EN 4008:-
Aerospace series. Elements of
electrical and optical connection.
Crimping tool and associated
accessories
EN 4008-017:2006
Head for crimping tool
M22520/4-01. Product standard
ACE/6/-/3
EN 4049:-
Aerospace series. Thermocouple
extension cable. Operating
temperatures between -65$0DC
and +260$0DC
EN 4049-001:2006
Technical specification
ACE/6/-/2
EN 4049-003:2006
Single core nickel chromium /
nickel-aluminium. Product standard
ACE/6/-/2
EN 4049-004:2006
Two core nickel chromium / nickel
aluminium shielded and jacketed.
Product standard
ACE/6/-/2
Page 46 of 71CEN EUROPEAN STANDARDS
EN 4057:-
Cable ties for harnesses. Test
methods
EN 4057-100:2006
Cable ties for harnesses, test
methods. General
ACE/6/-/8
EN 4057-302:2006
Cable ties for harnesses, test
methods. Flammability
ACE/6/-/8
EN 4057-304:2006
Cable ties for harnesses, test
methods. Loop tensile strength at
maximum working temperature
ACE/6/-/8
EN 4057-306:2006
Cable ties for harnesses, test
methods. Heat ageing test
ACE/6/-/8
EN 4057-307:2006
Resistance to ultra violet radiation
ACE/6/-/8
EN 4057-401:2006
Cable ties for harnesses, test
methods. Loop tensile strength
ACE/6/-/8
EN 4057-402:2006
Cable ties for harnesses, test
methods. Life cycle
ACE/6/-/8
EN 4057-404:2006
Cable ties for harnesses, test
methods. Low temperature
installation
ACE/6/-/8
EN 4057-406:2006
Cable ties for harnesses, test
methods. Locking barb retention
ACE/6/-/8
EN 4108:2006
Aerospace series. Wrenches, crow
foot attachment socket, socket
drive
ACE/12
EN 4109:2006
Aerospace series. Wrenches,
socket, face spanner
ACE/12
EN 4110:2006
Aerospace series. Wrenches, open
end, box
ACE/12
EN 4158:2006
Aerospace series. Paints and
varnishes. Test method for
measurement of electrical surface
resistance of conductive layers
ACE/65/-/4
EN 4354:2006
Aerospace series. Six lobe recess.
Drivers, relieved
ACE/12
EN 4356:2006
Aerospace series. Six lobe recess.
Drivers, short
ACE/12
EN 4357:2006
Aerospace series. Six lobe recess.
Drivers, handle
ACE/12
EN 4358:2006
Aerospace series. Six lobe recess.
Drivers, double ended, 90$0D
ACE/12
EN 4359:2006
Aerospace series. Six lobe recess.
Drivers. Technical specification
ACE/12
EN 4382:2006
Aerospace series. Heat resisting
alloy NI-PH3601 (NiCr22Mo9Nb).
Solution treated. Seamless tube.
For hydraulic application. D $3L 50
mm, a $3L 3 mm
ACE/61/-/48
EN 4383:2006
Aerospace series. Heat resisting
alloy NI-CH2601
(NiCr19Fe19Nb5Mo3). Non heat
treated. Remelting stock
ACE/61/-/48
EN 4496:-
Aerospace series. Screws,
100$0Dcountersunk normal head,
offset cruciform recess, close
tolerance normal shank, short
thread, in titanium alloy, anodized,
with aluminium pigmented coating.
Classification: 1 100MPa (at
ambient temperature) / 315$0DC
CORRIGENDUM:November 2006
ACE/12
EN 4530:-
Aerospace series. Sealing sleeves
used in elements of connection
EN 4530-005:2006
Sealing sleeves. For external
diameter cable 3 mm to 4,1 mm.
Product standard
ACE/6/-/3
EN 4530-006:2006
Sealing sleeves. For external
diameter cable 4.68 mm to 5.05
mm. Product standard
ACE/6/-/3
Page 47 of 71CEN EUROPEAN STANDARDS
EN 10021:2006
General technical delivery
requirements for steel products
ISE/5
EN 12271:2006
Surface dressing
B/510/2
EN 12674:-
Transport packaging. Roll
containers
EN 12674-4:2006
Performance requirements
PKW/0
EN 12923:-
Advanced technical ceramics.
Monolithic ceramics
EN 12923-1:2006
General practice for undertaking
corrosion tests
RPI/13
EN 13445:-
Unfired pressure vessels
EN 13445-6:-
Requirements for the design and
fabrication of pressure vessels and
pressure parts constructed from
spheroidal graphite cast iron
AMENDMENT 2:December 2006
PVE/1
EN 13480:-
Metallic industrial piping
EN 13480-3:-
Design and calculation
AMENDMENT 2:November 2006
PVE/10
EN 13501:-
Fire classification of construction
products and building elements
EN 13501-5:-
Classification using data from
external fire exposure to roofs tests
CORRIGENDUM:November 2006
FSH/22/8
EN 13707:-
Flexible sheets for waterproofing.
Reinforced bitumen sheets for roof
waterproofing. Definitions and
characteristics
AMENDMENT 1:November 2006
B/546/1
EN 13758:-
Textiles. Solar UV protective
properties
EN 13758-1:-
Method of test for apparel fabrics
AMENDMENT 1:December 2006
TCI/66
EN 13758-2:-
Classification and marking of
apparel
AMENDMENT 1:December 2006
TCI/66
EN 13858:2006
Corrosion protection of metals.
Non-electrolytically applied zinc
flake coatings on iron or steel
components
STI/33
EN 13947:2006
Thermal performance of curtain
walling. Calculation of thermal
transmittance
B/540
EN 13964:-
Suspended ceilings. Requirements
and test methods
AMENDMENT 1:November 2006
B/548
EN 13967:-
Flexible sheets for waterproofing.
Plastic and rubber damp proof
sheets including plastic and rubber
basement tanking sheet.
Definitions and characteristics
AMENDMENT 1:November 2006
B/546/2
EN 13969:-
Flexible sheets for waterproofing.
Bitumen damp proof sheets
including bitumen basement
tanking sheets. Definitions and
characteristics
AMENDMENT 1:November 2006
B/546/5
EN 13970:-
Flexible sheets for waterproofing.
Bitumen water vapour control
layers. Definitions and
characteristics
AMENDMENT 1:November 2006
B/546/5
EN 13984:-
Flexible sheets for waterproofing.
Plastic and rubber vapour control
layers. Definitions and
characteristics
AMENDMENT 1:November 2006
B/546/2
EN 14132:2003
Foodstuffs. Determination of
ochratoxin A in barley and roasted
coffee. HPLC method with
immunoaffinity column clean-up
AW/-/3
Page 48 of 71CEN EUROPEAN STANDARDS
EN 14133:2003
Foodstuffs. Determination of
ochratoxin A in wine and beer.
HPLC method with clean-up on a
immunoaffinity column
AW/-/3
EN 14133:-
Foodstuffs. Determination of
ochratoxin A in wine and beer.
HPLC method with immunoaffinity
column clean-up
CORRIGENDUM 1:December 2006
AW/-/3
EN 14140:-
LPG equipment and accessories.
Transportable refillable welded
steel cylinders for LPG. Alternative
design and construction
AMENDMENT 1:December 2006
PVE/19
EN 14346:2006
Characterization of waste.
Calculation of dry matter by
determination of dry residue or
water content
B/508/3
EN 14354:-
Wood-based panels. Wood veneer
floor covering
CORRIGENDUM 1:November 2006
B/541
EN 14411:2006
Ceramic tiles. Definitions,
classification, characteristics and
marking
B/539
EN 14438:2006
Gas-fired insets for heating more
than one room
GSE/36
EN 14476:-
Chemical disinfectants and
antiseptics. Virucidal quantitative
suspension test for chemical
disinfectants and antiseptics used
in human medicine. Test method
and requirements (phase 2, step 1)
AMENDMENT 1:October 2006
CH/216
EN 14492:-
Cranes. Power driven winches and
hoists
EN 14492-2:2006
Power driven hoists
MHE/3/6
EN 14647:-
Calcium aluminate cement.
Composition, specifications and
conformity criteria
CORRIGENDUM 1:November 2006
B/516/6
EN 14797:2006
Explosion venting devices
FSH/23
EN 14975:2006
Loft ladders. Requirements,
marking and testing
B/512
EN 14995:2006
Plastics. Evaluation of
compostability. Test scheme and
specifications
PRI/82
EN 15091:2006
Sanitary tapware. Electronic
opening and closing sanitary
tapware
B/504
EN 15115:2006
Textile floor coverings.
Determination of sensitivity to
spilled water
PRI/3
EN 15161:2006
Products used for treatment of
water intended for human
consumption. Anthracite
B/504/13
EN 15168:2006
Surface active agents.
Determination of hydroxyl value.
p-Toluensulfonyl isocyanate (TSI)
method and potentiometric titration
with tetrabutylammonium
hydroxide
CII/34
EN 15219:2006
Water equipment inside buildings.
Nitrate removal devices.
Requirements for performance,
safety and testing
B/504
EN 15257:2006
Cathodic protection. Competence
levels and certification of cathodic
protection personnel
GEL/603
CEN WORKSHOP
AGREEMENTSCWA 15627:2006
Small punch test method for
metallic materials
no current standard is superseded
£68.00 members, £136.00
non-members
CEN REPORTS
CEN/TR 12101:-
Smoke and heat control systems
Page 49 of 71CEN REPORTS
CEN/TR 12101-4:2006
Installed SHEVS systems for
smoke and heat ventilation
FSH/25
CEN/TR 15481:2006
Welding of reinforcing steel. Tack
weldability. Test methods and
performance requirements
WEE/43
CEN TECHNICAL
SPECIFICATIONSCEN/TS 13547:2006
Industrial valves. Copper alloy ball
valves
PSE/7
CEN/TS 14421:2006
Hose tail and ferrule for crimping
and swaging
PRI/66
CEN/TS 15379:2006
Building management.
Terminology and scope of services
RHE/16
CEN/TS 15440:2006
Solid recovered fuels. Method for
the determination of biomass
content
PTI/17
CENELEC PUBLICATIONS
EN 45020:2006
(ISO/IEC GUIDE 2:2004)
Standardization and related
activities. General vocabulary
QS/3
EN 55014:-
Electromagnetic compatibility.
Requirements for household
appliances, electric tools and
similar apparatus
EN 55014-1:2006
(CISPR 14-1:2005)
Emission
GEL/210/11
EN 55016:-
Specification for radio disturbance
and immunity measuring apparatus
and methods
EN 55016-1-2:-
(CISPR 16-1-2:2003/AMD 2:2006)
Ancillary equipment. Conducted
disturbances. Update of LISN
specifications
AMENDMENT 2:December 2006
GEL/210/12
EN 55016-2-3:2006
(CISPR 16-2-3:2006)
Methods of measurement of
disturbances and immunity.
Radiated disturbance
measurements
GEL/210/12
EN 60034:-
Rotating electrical machines
EN 60034-26:2006
(IEC 60034-26:2006)
Effects of unbalanced voltages on
the performance of three-phase
cage induction motors
PEL/2
EN 60118:-
Hearing aids
EN 60118-4:2006
(IEC 60118-4:2006)
Induction loop systems for hearing
aid purposes. Magnetic field
strength
EPL/29
EN 60317:-
Specifications for particular types
of winding wires
EN 60317-0-6:-
(IEC 60317-0-6:2001/AMD 1:2006)
General requirements. Glass-fibre
wound resin or varnish
impregnated, bare or enamelled
round copper wire
AMENDMENT 1:December 2006
GEL/55
EN 60335:-
Household and similar electrical
appliances. Safety
EN 60335-2-15:-
(IEC 60335-2-15:2002)
Particular requirements for
appliances for heating liquids
CORRIGENDUM:December 2006
CPL/61/07
EN 60454:-
Pressure-sensitive adhesive tapes
for electrical purposes
EN 60454-3-8:-
(IEC 60454-3-8:2006)
Specifications for individual
materials. Woven fabric tapes with
pressure-sensitive adhesive based
on glass, cellulose acetate alone or
combined with viscose fibre
CORRIGENDUM:December 2001
GEL/15/3
EN 60464:-
Varnished used for electrical
insulation
EN 60464-2/A1:-
(IEC 60464-2:2001/A1:2006)
Methods of test
CORRIGENDUM:December 2001
GEL/15/3/7
Page 50 of 71CENELEC PUBLICATIONS
EN 60512:-
Connectors for electronic
equipment. Tests and
measurements
EN 60512-9-3:-
(IEC 60512-9-3:2006)
Endurance tests. Test 9c:
Mechanical operation
(engaging/separating) with
electrical load
CORRIGENDUM:December 2006
EPL/48/2
EN 60512-12:-
Soldering tests
EN 60512-12-2:2006
(IEC 60512-12-2:2006)
Test 12b: Solderability, wetting,
soldering iron method
EPL/48/2
EN 60512-12-3:-
(IEC 60512-12-3:2006)
Test 12c: Solderability, de-wetting
CORRIGENDUM 1:December 2006
EPL/48/2
EN 60512-12-4:-
(IEC 60512-12-4:2006)
Test 12d: Resistance to soldering
heat, solder bath method
CORRIGENDUM 1:December 2006
EPL/48/2
EN 60512-12-5:-
(IEC 60512-12-5:2006)
Test 12e: Resistance to soldering
heat, soldering iron method
CORRIGENDUM:December 2006
EPL/48/2
EN 60670:-
Boxes and enclosures for electrical
accessories for household and
similar fixed electrical installations
EN 60670-22:2006
(IEC 60670-22:2003 MODIFIED)
Particular requirements for
connecting boxes and enclosures
PEL/23
EN 60745:-
Safety of hand-held
motor-operated electric tools
EN 60745-2-6:-
(IEC 60745-2-6:2003/AMD 1:2006)
Particular requirements for
hammers
AMENDMENT 1:May 2006
CPL/61/6
EN 60929:-
(IEC 60929:2006)
A.C.-supplied electronic ballasts for
tubular fluorescent lamps.
Performance requirements
CORRIGENDUM:December 2005
CPL/34/3
EN 60947:-
Low-voltage switchgear and
controlgear
EN 60947-4-2:-
(IEC 60947-4-2:1999/AMD 2:2006)
Contactors and motor-starters.
A.C. semiconductor motor
controllers and starters
AMENDMENT 2:December 2006
PEL/17/2
EN 60947-5-8:2006
(IEC 60947-5-8:2006)
Control circuit devices and
switching elements. Three-position
enabling switches
PEL/17/2
EN 61000:-
Electromagnetic compatibility
(EMC)
EN 61000-4-12:2006
(IEC 61000-4-12:2006)
Testing and measurement
techniques. Ring wave immunity
test
GEL/210/12
EN 61033:2006
(IEC 61033:1991/A1:2006)
Test methods for the determination
of bond strength of impregnating
agents to an enamelled wire
substrate
GEL/15/3/7
EN 61061:-
Insulating materials.
Non-impregnated densified
laminated wood for electrical
purposes
EN 61061-1:2006
(IEC 61061-1:2006)
Definitions, designation and
general requirements
GEL/15/3/6
EN 61076:-
Connectors for electronic
equipment. Product requirements
EN 61076-3-106:2006
(IEC 61076-3-106:2006)
Rectangular connectors. Detail
specification for protective
housings for use with 8-way
shielded and unshielded
connectors for industrial
environments incorporating the IEC
60603-7 series interface
EPL/48
EN 61163:-
Reliability stress screening
Page 51 of 71CENELEC PUBLICATIONS
EN 61163-1:2006
(IEC 61163-1:2006)
Repairable items manufactured in
lots
DS/1
EN 61212:-
Industrial rigid round laminated
tubes and rods based on
thermosetting resins for electrical
purposes
EN 61212-2:2006
(IEC 61212-2:2006)
Methods of test
GEL/15/3/6
EN 61241:-
Electrical apparatus for use in the
presence of combustible dust
EN 61241-0:2006
(IEC 61241-0:2004
MODIFIED/CORR:2005)General requirements
GEL/31/20
EN 61241-1:2006
(IEC 61241-1:2004)
Protection by enclosures "tD"
GEL/31/20
EN 61300:-
Fibre optic interconnecting devices
and passive components. Basic
test and measurement procedures
EN 61300-2:-
Tests
EN 61300-2-16:2006
(IEC 61300-2-16:2006)
Mould growth
GEL/86/2
EN 61300-2-38:2006
(IEC 61300-2-38:2006)
Sealing for pressurized fibre optic
devices
GEL/86/2
EN 61326:-
Electrical equipment for
measurement, control and
laboratory use. EMC requirements
EN 61326-2-4:2006
(IEC 61326-2-4:2006)
Particular requirements. Test
configurations, operational
conditions and performance criteria
for insulation monitoring devices,
according to IEC 61557-8 and for
equipment for insulation fault
location according to IEC 61557-9
GEL/65/1
EN 61338:-
Waveguide type dielectric
resonators
EN 61338-1-4:-
(IEC 61338-1-4:2005)
General information and test
conditions. Measurement method
of complex relative permittivity for
dielectric resonator materials at
millimetre-wave frequency
CORRIGENDUM:November 2006
EPL/49
EN 61672:-
Electroacoustics. Sound level
meters
EN 61672-3:2006
(IEC 61672-3:2006)
Periodic tests
EPL/29
EN 61755:-
Fibre optic connector optical
interfaces
EN 61755-1:-
(IEC 61755-1:2005)
Optical interfaces for single mode
non-dispersion shifted fibres.
General and guidance
CORRIGENDUM:December 2001
GEL/86/2
EN 61788:-
Superconductivity
EN 61788-7:2006
(IEC 61788-7:2006)
Electronic characteristic
measurements. Surface resistance
of superconductors at microwave
frequencies
L/-/90
EN 62132:-
Integrated circuits. Measurement of
electromagnetic immunity, 150 kHz
to 1 GHz
EN 62132-1:-
(IEC 62132-1:2006/CORR 2006)
General conditions and definitions
CORRIGENDUM:November 2006
EPL/47
EN 62217:-
(IEC 62217:2005)
Polymeric insulators for indoor and
outdoor use with a nominal voltage
> 1 000 V. General definitions, test
methods and acceptance criteria
CORRIGENDUM:December 2006
PEL/36
EN 62271:-
High-voltage switchgear and
controlgear
EN 62271-100:-
(IEC 62271-100:2001/A2:2006)
High-voltage alternating-current
circuit-breakers
AMENDMENT 2:December 2001
PEL/17/1
Page 52 of 71CENELEC PUBLICATIONS
EN 62271-109:2006
(IEC 62271-109:2006)
Alternating- current series
capacitor by-pass switches
PEL/17/1
EN 62290:-
Railway applications. Urban guided
transport management and
command/control systems
EN 62290-1:2006
(IEC 62290-1:2006)
System principles and fundamental
concepts
GEL/9
EN 62308:2006
(IEC 62308:2006)
Reliability assessment and
durability analysis
DS/1
EN 62329:-
Heat shrinkable moulded shapes
EN 62329-1:-
(IEC 62329-1:2005)
Definitions and general
requirements
CORRIGENDUM 1:December 2006
GEL/15/3/5
EN 62343:-
Dynamic modules
EN 62343-1-3:2006
(IEC 62343-1-3:2006)
Performance standards. Dynamic
gain tilt equaliser with pigtails for
use in controlled environment
(category C)
GEL/86/3
EN 175301:-
Detail specification
EN 175301-801:2006
High density rectangular
connectors, round removable
crimp contacts
EPL/48
CENELEC TECHNICAL
SPECIFICATIONSCLC/TS 61111:2006
(IEC
61111:1992/CORR:2000/A1:2002)
Matting of insulating material for
electrical purposes
PEL/78
CLC/TS 61112:2006
(IEC
61112:1992/CORR:2000/A1:2002)
Blankets of insulating material for
electrical purposes
PEL/78
ETSI (EUROPEAN
TELECOMMUNICATIONS
STANDARDS INSTITUTE)
EUROPEAN PUBLICATIONSEN 300 162:-
Electromagnetic compatibility and
radio spectrum matters (ERM).
Radiotelephone transmitters and
receivers for the maritime mobile
service operating in VHF bands
EN 300 162-2: December 2006
(Version 1.2.1)
Harmonized EN covering essential
requirements of article 3.2 of the
R&TTE directive
EN 300 162-3: December 2006
(Version 1.2.1)
Harmonized EN covering essential
requirements of article 3.3 (e) of
the R&TTE directive
EN 301 925: December 2006
(Version 1.2.1)
Electromagnetic compatibility and
radio spectrum matters (ERM).
Radiotelephone transmitters and
receivers for the maritime mobile
service operating in VHF bands.
Technical characteristics and
methods of measurement
EN 302 842:-
Electromagnetic compatibility and
radio spectrum matters (ERM).
VHF air-ground and air-air digital
link (VDL) mode 4 radio
equipment. Technical
characteristics and methods of
measurement for aeronautical
mobile (airborne) equipment
EN 302 842-1: December 2006
(Version 1.2.1)
Physical layer
EN 302 842-2: December 2006
(Version 1.2.1)
General description and data link
layer
EN 302 842-3: December 2006
(Version 1.2.1)
Additional broadcast aspects
EN 302 842-4: December 2006
(Version 1.2.1)
Point-to-point functions
OTHER ETSI (EUROPEAN
TELECOMMUNICATIONS
STANDARDS INSTITUTE)
PUBLICATIONSEG 202 416: December 2006
(Version 1.1.2)
Human factors (HF). User
interfaces. Setup procedure design
guidelines for mobile terminals and
services
Page 53 of 71OTHER ETSI (EUROPEAN TELECOMMUNICATIONS STANDARDS INSTITUTE) PUBLICATIONS
EG 202 417: December 2006
(Version 1.1.2)
Human factors (HF). User
education guidelines for mobile
terminals and services
EG 202 549: December 2006
(Version 1.1.1)
Telecommunications and internet
converged services and protocols
for advanced networking
(TISPAN). Design guide.
Application of security
countermeasures to service
capabilities
ES 201 915:-
Open service access (OSA).
Application programming interface
(API)
ES 201 915-1: December 2006
(Version 1.6.1)
Overview (Parlay 3)
ES 201 915-2: December 2006
(Version 1.6.1)
Common data definitions (Parlay 3)
ES 201 915-4: December 2006
(Version 1.6.1)
Call control SCF (Parlay 3)
ES 201 915-5: December 2006
(Version 1.6.1)
User interaction SCF (Parlay 3)
ES 201 915-6: December 2006
(Version 1.5.1)
Mobility SCF (Parlay 3)
ES 201 915-8: December 2006
(Version 1.6.1)
Data session control SCF (Parlay
3)
ES 201 915-11: December 2006
(Version 1.6.1)
Account management SCF (Parlay
3)
ES 201 915-12: December 2006
(Version 1.6.1)
Charging SCF (Parlay 3)
ES 202 391:-
Open service access (OSA).
Parlay X web services
ES 202 391-1: December 2006
(Version 1.2.1)
Common (Parlay X 2)
ES 202 391-2: December 2006
(Version 1.2.1)
Third party call (Parlay X 2)
ES 202 391-3: December 2006
(Version 1.2.1)
Call notification (Parlay X 2)
ES 202 391-4: December 2006
(Version 1.2.1)
Short messaging (Parlay X 2)
ES 202 391-5: December 2006
(Version 1.2.1)
Multimedia messaging (Parlay X 2)
ES 202 391-6: December 2006
(Version 1.2.1)
Payment (Parlay X 2)
ES 202 391-7: December 2006
(Version 1.2.1)
Account management (Parlay X 2)
ES 202 391-8: December 2006
(Version 1.2.1)
Terminal status (Parlay X 2)
ES 202 391-9: December 2006
(Version 1.2.1)
Terminal location (Parlay X 2)
ES 202 391-10: December 2006
(Version 1.2.1)
Call handling (Parlay X 2)
ES 202 391-11: December 2006
(Version 1.2.1)
Audio call (Parlay X 2)
ES 202 391-12: December 2006
(Version 1.2.1)
Multimedia conference (Parlay X 2)
ES 202 391-13: December 2006
(Version 1.2.1)
Address list management (Parlay X
2)
ES 202 391-14: December 2006
(Version 1.2.1)
Presence (Parlay X 2)
ES 202 915:-
Open service access (OSA).
Application programming interface
(API)
ES 202 915-1: December 2006
(Version 1.4.1)
Overview (Parlay 4)
ES 202 915-2: December 2006
(Version 1.4.1)
Common data definitions (Parlay 4)
ES 202 915-3: December 2006
(Version 1.4.1)
Framework (Parlay 4)
ES 202 915-4:-
Call control
Page 54 of 71OTHER ETSI (EUROPEAN TELECOMMUNICATIONS STANDARDS INSTITUTE) PUBLICATIONS
ES 202 915-4-1: December 2006
(Version 1.4.1)
Call control common definitions
(Parlay 4)
ES 202 915-4-2: December 2006
(Version 1.4.1)
Generic call control SCF (Parlay 4)
ES 202 915-4-3: December 2006
(Version 1.4.1)
Multi-party call control SCF (Parlay
4)
ES 202 915-4-4: December 2006
(Version 1.4.1)
Multi-media call control SCF
(Parlay 4)
ES 202 915-4-5: December 2006
(Version 1.4.1)
Conference call control SCF
(Parlay 4)
ES 202 915-5: December 2006
(Version 1.4.1)
User interaction SCF (Parlay 4)
ES 202 915-6: December 2006
(Version 1.4.1)
Mobility SCF (Parlay 4)
ES 202 915-7: December 2006
(Version 1.4.1)
Terminal capabilities SCF (Parlay
4)
ES 202 915-8: December 2006
(Version 1.4.1)
Data session control SCF (Parlay
4)
ES 202 915-9: December 2006
(Version 1.3.1)
Generic messaging SCF (Parlay 4)
ES 202 915-10: December 2006
(Version 1.4.1)
Connectivity manager SCF (Parlay
4)
ES 202 915-11: December 2006
(Version 1.4.1)
Account management SCF (Parlay
4)
ES 202 915-12: December 2006
(Version 1.4.1)
Charging SCF (Parlay 4)
ES 202 915-13: December 2006
(Version 1.3.1)
Policy management SCF (Parlay 4)
SR 002 564: December 2006
(Version 1.1.1)
Applicability of existing ETSI and
ETSI/3GPP deliverables to eHealth
TR 102 505: December 2006
(Version 1.1.1)
Speech processing, transmission
and quality aspects (STQ).
Development of a reference web
page
TR 102 513: December 2006
(Version 1.1.1)
Terrestrial trunked radio (TETRA).
Feasibility study into the
implications of operating public
safety sector (PSS) TEDS using
the proposed "tuning range"
concept in the 410 MHz to 430
MHz and 450 MHz to 470 MHz
frequency bands
TR 102 522: December 2006
(Version 1.1.1)
Electromagnetic compatibility and
radio spectrum matters (ERM).
Short range devices (SRD).
Equipment for detecting
movement. Radio equipment
operating in the frequency range
17,1 GHz to 17,3 GHz. System
reference document for ground
based synthetic aperture radar
(GBSAR)
TR 102 648:-
Speech processing, transmission
and quality aspects (STQ). Test
methodologies for ETSI test events
and results. Test methodologies for
ETSI test events
TR 102 648-1: December 2006
(Version 1.1.1)
VoIP speech quality testing
TR 133 978: December 2006
(Version 6.6.0)
Universal mobile
telecommunications system
(UMTS). Security aspects of early
IP multimedia subsystem (IMS)
(3GPP TR 33.978 version 6.6.0
release 6)
TS 101 456: December 2006
(Version 1.4.2)
Electronic signatures and
infrastructures (ESI). Policy
requirements for certification
authorities issuing qualified
certificates
TS 102 042: December 2006
(Version 1.2.3)
Electronic signatures and
infrastructures (ESI). Policy
requirements for certification
authorities issuing public key
certificates
Page 55 of 71OTHER ETSI (EUROPEAN TELECOMMUNICATIONS STANDARDS INSTITUTE) PUBLICATIONS
TS 102 165:-
Telecommunications and internet
converged services and protocols
for advanced networking
(TISPAN). Methods and protocols
TS 102 165-1: December 2006
(Version 4.2.1)
Method and proforma for threat,
risk, vulnerability analysis
TS 102 173: December 2006
(Version 1.3.1)
Services for computer supported
telecommunications applications
(CSTA) phase III (ISO/IEC
18051:2000 Modified)
TS 102 174: December 2006
(Version 1.3.1)
XML protocol for computer
supported telecommunications
applications (CSTA) phase III
(ISO/IEC DIS 18056 Modified)
TS 102 182: December 2006
(Version 1.2.1)
Emergency communications
(EMTEL). Requirements for
communications from
authorities/organizations to
individuals, groups or the general
public during emergencies
TS 102 232:-
Lawful interception (LI). Handover
interface and service-specific
details (SSD) for IP delivery
TS 102 232-1: December 2006
(Version 2.1.1)
Handover specification for IP
delivery
TS 102 232-2: December 2006
(Version 2.1.1)
Service-specific details for E-mail
services
TS 102 232-3: December 2006
(Version 2.1.1)
Service-specific details for internet
access services
TS 102 232-4: December 2006
(Version 2.1.1)
Service-specific details for layer 2
services
TS 102 232-6: December 2006
(Version 2.1.1)
Service-specific details for
PSTN/ISDN services
TS 102 361:-
Electromagnetic compatibility and
radio spectrum matters (ERM).
Digital mobile radio (DMR) systems
TS 102 361-1: December 2006
(Version 1.4.1)
DMR air interface (AI) protocol
TS 102 385:-
Broadband radio access networks
(BRAN). HiperMAN. Conformance
testing for WiMAX/HiperMAN 1.2.1
TS 102 385-1: December 2006
(Version 2.3.1)
Protocol implementation
conformance statement (PICS)
proforma
TS 102 385-2: December 2006
(Version 2.3.1)
Test suite structure and test
purposes (TSS&TP)
TS 102 385-3: December 2006
(Version 2.3.1)
Abstract test suite (ATS)
TS 102 462: December 2006
(Version 1.1.1)
Satellite earth stations and
systems (SES). Broadband
satellite multimedia (BSM). QoS
functional architecture
TS 102 465: December 2006
(Version 1.1.1)
Satellite earth stations and
systems (SES). Broadband
satellite multimedia (BSM).
General security architecture
TS 102 472: December 2006
(Version 1.2.1)
Digital video broadcasting (DVB).
IP datacast over DVB-H: content
delivery protocols
TS 102 551:-
Satellite earth stations and
systems (SES). Satellite digital
radio (SDR) systems. Inner
physical layer of the radio interface
TS 102 551-1: December 2006
(Version 1.1.1)
Single carrier transmission
TS 102 551-2: December 2006
(Version 1.1.1)
Multiple carrier transmission
TS 102 558: December 2006
(Version 1.1.1)
Methods for testing and
specification (MTS). Internet
protocol testing (IPT): IPv6
security. Requirements catalogue
TS 102 559: December 2006
(Version 1.1.1)
Methods for testing and
specification (MTS). Internet
protocol testing (IPT): IPv6
mobility. Requirements catalogue
Page 56 of 71OTHER ETSI (EUROPEAN TELECOMMUNICATIONS STANDARDS INSTITUTE) PUBLICATIONS
TS 122 101: December 2006
(Version 7.8.0)
Universal mobile
telecommunications system
(UMTS). Service aspects. Service
principles (3GPP TS 22.101
version 7.8.0 release 7)
TS 122 234: December 2006
(Version 7.5.0)
Universal mobile
telecommunications system
(UMTS). Requirements on 3GPP
system to wireless local area
network (WLAN) interworking
(3GPP TS 22.234 version 7.5.0
release 7)
TS 123 060: December 2006
(Version 3.17.0)
Digital cellular telecommunications
system (phase 2+). Universal
mobile telecommunications system
(UMTS). General packet radio
service (GPRS). Service
description. Stage 2 (3GPP TS
23.060 version 3.17.0 release
1999)
TS 123 060: December 2006
(Version 4.11.0)
(3GPP TS 23.060 version 4.11.0
release 4)
TS 123 060: December 2006
(Version 5.13.0)
(3GPP TS 23.060 version 5.13.0
release 5)
TS 123 060: December 2006
(Version 6.15.0)
(3GPP TS 23.060 version 6.15.0
release 6)
TS 124 109: December 2006
(Version 6.8.0)
Universal mobile
telecommunications system
(UMTS). Bootstrapping interface
(Ub) and network application
function interface (Ua). Protocol
details (3GPP TS 24.109 version
6.8.0 release 6)
TS 124 247: December 2006
(Version 6.7.0)
Digital cellular telecommunications
system (phase 2+). Universal
mobile telecommunications system
(UMTS). Messaging using the IP
multimedia (IM) core network (CN)
subsystem. Stage 3 (3GPP TS
24.247 version 6.7.0 release 6)
TS 125 106: December 2006
(Version 5.12.0)
Universal mobile
telecommunications system
(UMTS). UTRA repeater radio
transmission and reception (3GPP
TS 25.106 version 5.12.0 release
5)
TS 125 106: December 2006
(Version 6.6.0)
(3GPP TS 25.106 version 6.6.0
release 6)
TS 125 106: December 2006
(Version 7.2.0)
(3GPP TS 25.106 version 7.2.0
release 7)
TS 125 113: December 2006
(Version 7.5.0)
Universal mobile
telecommunications system
(UMTS). Base station and repeater
electromagnetic compatibility
(EMC) (3GPP TS 25.113 version
7.5.0 release 7)
TS 125 143: December 2006
(Version 5.12.0)
Universal mobile
telecommunications system
(UMTS). UTRA repeater
conformance testing (3GPP TS
25.143 version 5.12.0 release 5)
TS 125 143: December 2006
(Version 6.6.0)
(3GPP TS 25.143 version 6.6.0
release 6)
TS 125 143: December 2006
(Version 7.2.0)
(3GPP TS 25.143 version 7.2.0
release 7)
TS 125 214: December 2006
(Version 6.11.0)
Universal mobile
telecommunications system
(UMTS). Physical layer procedures
(FDD) (3GPP TS 25.214 version
6.11.0 release 6)
TS 125 214: December 2006
(Version 7.3.0)
(3GPP TS 25.214 version 7.3.0
release 7)
TS 125 401: December 2006
(Version 6.9.0)
Universal mobile
telecommunications system
(UMTS). UTRAN overall
description (3GPP TS 25.401
version 6.9.0 release 6)
TS 125 401: December 2006
(Version 7.2.0)
(3GPP TS 25.401 version 7.2.0
release 7)
Page 57 of 71OTHER ETSI (EUROPEAN TELECOMMUNICATIONS STANDARDS INSTITUTE) PUBLICATIONS
TS 125 430: December 2006
(Version 7.2.0)
Universal mobile
telecommunications system
(UMTS). UTRAN Iub Interface:
general aspects and principles
(3GPP TS 25.430 version 7.2.0
release 7)
TS 125 434: December 2006
(Version 7.1.0)
Universal mobile
telecommunications system
(UMTS). UTRAN Iub interface data
transport and transport signalling
for common transport channel data
streams (3GPP TS 25.434 version
7.1.0 release 7)
TS 125 435: December 2006
(Version 7.3.0)
Universal mobile
telecommunications system
(UMTS). UTRAN Iub interface user
plane protocols for common
transport channel data streams
(3GPP TS 25.435 version 7.3.0
release 7)
TS 125 450: December 2006
(Version 7.1.0)
Universal mobile
telecommunications system
(UMTS). UTRAN Iupc interface
general aspects and principles
(3GPP TS 25.450 version 7.1.0
release 7)
TS 125 461: December 2006
(Version 7.3.0)
Universal mobile
telecommunications system
(UMTS). UTRAN Iuant interface:
layer 1 (3GPP TS 25.461 version
7.3.0 release 7)
TS 125 462: December 2006
(Version 6.4.0)
Universal mobile
telecommunications system
(UMTS). UTRAN Iuant interface:
signalling transport (3GPP TS
25.462 version 6.4.0 release 6)
TS 125 463: December 2006
(Version 7.4.0)
Universal mobile
telecommunications system
(UMTS). UTRAN Iuant interface:
remote electrical tilting (RET)
antennas application part (RETAP)
signalling (3GPP TS 25.463
version 7.4.0 release 7)
TS 131 102: December 2006
(Version 6.16.0)
Universal mobile
telecommunications system
(UMTS). Characteristics of the
universal subscriber identity
module (USIM) application (3GPP
TS 31.102 version 6.16.0 release
6)
TS 131 102: December 2006
(Version 7.7.0)
(3GPP TS 31.102 version 7.7.0
release 7)
TS 131 121: November 2006
(Version 6.6.0)
Universal mobile
telecommunications system
(UMTS). UICC-terminal interface.
Universal subscriber identity
module (USIM) application test
specification (3GPP TS 31.121
version 6.6.0 release 6)
TS 131 122: December 2006
(Version 6.3.0)
Universal mobile
telecommunications system
(UMTS). Universal subscriber
identity module (USIM)
conformance test specification
(3GPP TS 31.122 version 6.3.0
release 6)
TS 131 124: November 2006
(Version 6.7.0)
Universal mobile
telecommunications system
(UMTS). Mobile equipment (ME)
conformance test specification.
Universal subscriber interface
module application toolkit (USAT)
conformance test specification
(3GPP TS 31.124 version 6.7.0
release 6)
TS 133 102: December 2006
(Version 7.1.0)
Universal mobile
telecommunications system
(UMTS). 3G security. Security
architecture (3GPP TS 33.102
version 7.1.0 release 7)
TS 133 203: December 2006
(Version 7.4.0)
Digital cellular telecommunications
system (phase 2+). Universal
mobile telecommunications system
(UMTS). 3G security. Access
security for IP-based services
(3GPP TS 33.203 version 7.4.0
release 7)
TS 133 210: December 2006
(Version 7.2.0)
Digital cellular telecommunications
system (phase 2+). Universal
mobile telecommunications system
(UMTS). 3G security. Network
domain security (NDS). IP network
layer security (3GPP TS 33.210
version 7.2.0 release 7)
Page 58 of 71OTHER ETSI (EUROPEAN TELECOMMUNICATIONS STANDARDS INSTITUTE) PUBLICATIONS
TS 133 220: December 2006
(Version 6.11.0)
Digital cellular telecommunications
system (phase 2+). Universal
mobile telecommunications system
(UMTS). Generic authentication
architecture (GAA). Generic
bootstrapping architecture (3GPP
TS 33.220 version 6.11.0 release
6)
TS 133 220: December 2006
(Version 7.6.0)
(3GPP TS 33.220 version 7.6.0
release 7)
TS 133 246: December 2006
(Version 6.9.0)
Universal mobile
telecommunications system
(UMTS). 3G security. Security of
multimedia broadcast/multicast
service (MBMS) (3GPP TS 33.246
version 6.9.0 release 6)
TS 134 229:-
Universal mobile
telecommunications system
(UMTS). Internet protocol (IP)
multimedia call control protocol
based on session initiation protocol
(SIP) and session description
protocol (SDP)
TS 134 229-1: December 2006
(Version 5.2.0)
Protocol conformance specification
(3GPP TS 34.229-1 version 5.2.0
release 5)
TS 134 229-2: December 2006
(Version 5.2.0)
Implementation conformance
statement (ICS) specification
(3GPP TS 34.229-2 version 5.2.0
release 5)
TS 134 229-2: December 2006
(Version 6.0.0)
(3GPP TS 34.229-2 version 6.0.0
release 6)
TS 141 101: December 2006
(Version 6.7.0)
Digital cellular telecommunications
system (phase 2+). Technical
specifications and technical reports
for a GERAN-based 3GPP system
(3GPP TS 41.101 version 6.7.0
release 6)
TS 143 020: December 2006
(Version 4.3.0)
Digital cellular telecommunications
system (phase 2+).
Security-related network functions
(3GPP TS 43.020 version 4.3.0
release 4)
TS 143 246: December 2006
(Version 6.10.0)
Digital cellular telecommunications
system (phase 2+). Multimedia
broadcast/multicast service
(MBMS) in the GERAN. Stage 2
(3GPP TS 43.246 version 6.10.0
release 6)
TS 143 318: December 2006
(Version 6.8.0)
Digital cellular telecommunications
system (phase 2+). Generic
access to the A/Gb interface.
Stage 2 (3GPP TS 43.318 version
6.8.0 release 6)
TS 144 006: December 2006
(Version 6.5.0)
Digital cellular telecommunications
system (phase 2+). Mobile station -
base stations system (MS - BSS)
interface data link (DL) layer
specification (3GPP TS 44.006
version 6.5.0 release 6)
TS 144 018: December 2006
(Version 6.20.0)
Digital cellular telecommunications
system (phase 2+). Mobile radio
interface layer 3 specification.
Radio resource control (RRC)
protocol (3GPP TS 44.018 version
6.20.0 release 6)
TS 148 018: December 2006
(Version 5.14.0)
Digital cellular telecommunications
system (phase 2+). General packet
radio service (GPRS). Base station
system (BSS) - serving GPRS
support node (SGSN). BSS GPRS
protocol (BSSGP) (3GPP TS
48.018 version 5.14.0 release 5)
TS 148 018: December 2006
(Version 6.16.0)
(3GPP TS 48.018 version 6.16.0
release 6)
TS 151 010:-
Digital cellular telecommunications
system (phase 2+). Mobile station
(MS) conformance specification
TS 151 010-2: December 2006
(Version 7.4.0)
Protocol implementation
conformance statement (PICS)
proforma specification (3GPP TS
51.010-2 version 7.4.0 release 7)
TS 151 010-4: November 2006
(Version 4.3.0)
Subscriber identity module (SIM)
application toolkit conformance test
specification (3GPP TS 51.010-4
version 4.3.0 release 4)
Page 59 of 71OTHER ETSI (EUROPEAN TELECOMMUNICATIONS STANDARDS INSTITUTE) PUBLICATIONS
TS 151 010-5: December 2006
(Version 7.4.0)
Inter-radio-access-technology
(RAT) (GERAN / UTRAN)
interaction abstract test suite (ATS)
(3GPP TS 51.010-5 version 7.4.0
release 7)
TS 187 005: December 2006
(Version 1.1.1)
Telecommunications and internet
converged services and protocols
for advanced networking
(TISPAN). NGN lawful interception.
Lawful interception functional
entities, information flow and
reference points
IEC PUBLICATIONS
IEC 60027:-
Letter symbols to be used in
electrical technology
IEC 60027-4:2006
(Edition 2)
Rotating electrical machines
£68.80 members, £71.67
non-membersSS/7
IEC 60027-6:2006
Control technology
£46.40 members, £48.33
non-membersSS/7
IEC/TS 60034:-
Rotating electrical machines
IEC/TS 60034-27:2006
Off-line partial discharge off-line
measurements on the stator
winding insulation of rotating
electrical machines
£131.20 members, £136.67
non-membersPEL/2
IEC 60050:-
International electrotechnical
vocabulary
IEC 60050-351:2006
(Edition 3)
Control technology
£192.00 members, £200.00
non-membersGEL/65
IEC 60079:-
Explosive atmospheres
IEC 60079-19:2006
(Edition 2)
Equipment repair, overhaul and
reclamation
£131.20 members, £136.67
non-membersGEL/31/11
IEC 60086:-
Primary batteries
IEC 60086-1:2006
(Edition 10)
General
£116.80 members, £121.67
non-membersCPL/35
IEC 60086-2:2006
(Edition 11)
Physical and electrical
specifications
£131.20 members, £136.67
non-membersCPL/35
IEC 60095:-
Lead-acid starter batteries
IEC 60095-1:2006
(Edition 7)
General requirements and test
methods
£84.80 members, £88.33
non-membersPEL/21
IEC 60118:-
Electroacoustics. Hearing aids
IEC 60118-4:2006
(Edition 2)
Induction loop systems for hearing
aid purposes. Magnetic field
strength
£116.80 members, £121.67
non-membersEPL/29
IEC 60155:-
Glow-starters for fluorescent lamps
AMENDMENT 2:November 2006
£17.60 members, £18.33
non-membersCPL/34/1
IEC 60269:-
Low-voltage fuses
IEC 60269-1:2006
(Edition 4)
General requirements
£168.00 members, £175.00
non-membersPEL/32
IEC 60269-2:2006
(Edition 3)
Supplementary requirements for
fuses for use by authorised
persons (fuses mainly for industrial
application). Examples of
standardized systems of fuses A to
I
£193.60 members, £201.67
non-membersPEL/32
Page 60 of 71IEC PUBLICATIONS
IEC 60269-3:2006
(Edition 3)
Supplementary requirements for
fuses for use by unskilled persons
(fuses mainly for household or
similar application). Examples of
standardized systems of fuses A to
F
£192.00 members, £200.00
non-membersPEL/32
IEC 60269-4:2006
(Edition 4)
Supplementary requirements for
fuse-links for the protection of
semiconductor devices
£131.20 members, £136.67
non-membersPEL/32
IEC 60287:-
Electric cables. Calculation of the
current rating
IEC 60287-1-1:2006
(Edition 2)
Current rating equations (100 %
load factor) and calculation of
losses. General
£92.80 members, £96.67
non-membersGEL/20/16
IEC 60317:-
Specifications for particular types
of winding wires
IEC 60317-0:-
General requirements
IEC 60317-0-5:2006
(Edition 2)
Glass-fibre braided resin or varnish
impregnated, bare or enamelled
rectangular copper wire
£68.80 members, £71.67
non-membersGEL/55
IEC 60317-0-6:-
Glass-fibre wound resin or varnish
impregnated, bare or enamelled
round copper wire
AMENDMENT 1:October 2006
£17.60 members, £18.33
non-membersGEL/55
IEC 60335:-
Household and similar electrical
appliances. Safety
IEC 60335-2-35:-
Particular requirements for
instantaneous water heaters
AMENDMENT 1:October 2006
£17.60 members, £18.33
non-membersCPL/61/07
IEC 60384:-
Fixed capacitors for use in
electronic equipment
IEC 60384-3:2006
(Edition 3)
Sectional specification: surface
mount fixed tantalum electrolytic
capacitors with manganese dioxide
solid electrolyte
£84.80 members, £88.33
non-membersEPL/40X
IEC 60384-3-1:2006
(Edition 2)
Blank detail specification: surface
mount fixed tantalum electrolytic
capacitors with manganese dioxide
solid electrolyte. Assessment level
EZ
£46.40 members, £48.33
non-membersEPL/40X
IEC/TS 60479:-
Effects of current on human beings
and livestock
IEC/TS 60479-1:-
General aspects
CORRIGENDUM 1:October 2006
JPEL/64
IEC 60601:-
Medical electrical equipment
IEC 60601-1:-
General requirements for basic
safety and essential performance
CORRIGENDUM 1:December 2006
CH/62/1
IEC 60601-1-6:2006
(Edition 2)
General requirements for basic
safety and essential performance.
Collateral standard: usability
£155.20 members, £161.67
non-membersCH/62/1
IEC/TR 60728:-
Cable networks for television
signals, sound signals and
interactive services
IEC/TR 60728-6-1:2006
System guidelines for analogue
optical transmission systems
£116.80 members, £121.67
non-membersEPL/100
IEC 60825:-
Safety of laser products
IEC 60825-2:-
Safety of optical fibre
communication systems
AMENDMENT 1:November 2006
£35.20 members, £36.67
non-membersEPL/76
Page 61 of 71IEC PUBLICATIONS
IEC/TR 60825-8:2006
(Edition 2)
Guidelines for the safe use of laser
beams on humans
£100.80 members, £105.00
non-membersEPL/76
IEC 60874:-
Connectors for optical fibres and
cables
IEC 60874-1:2006
(Edition 5)
General specification
£84.80 members, £88.33
non-membersGEL/86/2
IEC 60874-1-1:2006
(Edition 2)
Blank detail specification
£38.40 members, £40.00
non-membersGEL/86/2
IEC 60915:2006
(Edition 2)
Fixed capacitors for use in
electronic equipment. Preferred
dimensions of shaft ends, bushes
and for the mounting of single hole,
bush-mounted, shaft-operated
electronic components
£51.20 members, £53.33
non-membersEPL/40X
IEC 60938:-
Fixed inductors for electromagnetic
interference suppression
IEC 60938-2:-
Sectional specification
AMENDMENT 1:October 2006
£41.60 members, £43.33
non-membersEPL/40X
IEC 60947:-
Low-voltage switchgear and
controlgear
IEC 60947-4-2:-
Contactors and motor-starters.
A.C. semiconductor motor
controllers and starters
AMENDMENT 2:November 2006
£92.80 members, £96.67
non-membersPEL/17/2
IEC 60947-5-9:2006
Control circuit devices and
switching elements. Flow rate
switches
£92.80 members, £96.67
non-membersPEL/17/2
IEC 61000:-
Electromagnetic compatibility
(EMC)
IEC/TR 61000-2-14:2006
Environment. Overvoltages on
pubic electricity distribution
networks
£116.80 members, £121.67
non-membersGEL/210/8
IEC 61000-4:-
Testing and measurement
techniques
IEC 61000-4-1:2006
(Edition 3)
Overview of IEC 61000-4 series
£51.20 members, £53.33
non-membersGEL/210/12
IEC 61000-4-18:2006
Damped oscillatory wave immunity
test
£100.80 members, £105.00
non-membersGEL/210/12
IEC 61000-4-20:-
Emission and immunity testing in
transverse electromagnetic (TEM)
waveguides
AMENDMENT 1:November 2006
£17.60 members, £18.33
non-membersGEL/210/12
IEC 61025:2006
(Edition 2)
Fault tree analysis (FTA)
£131.20 members, £136.67
non-membersDS/1
IEC 61061:-
Non-impregnated densified
laminated wood for electrical
purposes
IEC 61061-1:2006
(Edition 3)
Definitions, designation and
general requirements
£25.60 members, £26.67
non-membersGEL/15/3/6
IEC 61161:2006
(Edition 2)
Ultrasonics. Power measurement.
Radiation force balances and
performance requirements
£116.80 members, £121.67
non-membersEPL/87
IEC 61169:-
Radio-frequency connectors
Page 62 of 71IEC PUBLICATIONS
IEC 61169-16:2006
Sectional specification. RF coaxial
connectors with inner diameter of
outer conductor 7 mm (0,276 in)
with screw coupling.
Characteristics impedance 50
ohms (75 Ohms) (type N)
£92.80 members, £96.67
non-membersEPL/46/2
IEC 61223:-
Evaluation and routine testing in
medical imaging departments
IEC 61223-2-6:2006
(Edition 2)
Constancy tests. Imaging
performance of computed
tomography X-ray equipment
£92.80 members, £96.67
non-membersCH/62/2
IEC/TR 61282:-
Fibre optic communication system
design guides
IEC/TR 61282-3:2006
(Edition 3)
Calculation of link polarization
mode dispersion
£92.80 members, £96.67
non-membersGEL/86/3
IEC/TR 61282-8:2006
Calculating dispersion penalty from
measured time-resolved chirp data
£64.00 members, £66.67
non-membersGEL/86/3
IEC 61300:-
Fibre optic interconnecting devices
and passive components. Basic
test and measurement procedures
IEC 61300-2:-
Tests
IEC 61300-2-26:2006
(Edition 2)
Salt mist
£35.20 members, £36.67
non-membersGEL/86/2
IEC 61300-2-37:2006
(Edition 2)
Cable bending for fibre optic
closures
£32.00 members, £33.33
non-membersGEL/86/2
IEC 61300-3:-
Examinations and measurements
IEC 61300-3-10:2006
(Edition 2)
Gauge retention force
£20.80 members, £21.67
non-membersGEL/86/2
IEC 61300-3-14:2006
(Edition 2)
Accuracy and repeatability of the
attenuation settings of a variable
attenuator
£38.40 members, £40.00
non-membersGEL/86/2
IEC 61300-3-15:2006
(Edition 2)
Dome eccentricity of a convex
polished ferrule endface
£35.20 members, £36.67
non-membersGEL/86/2
IEC 61300-3-24:2006
(Edition 2)
Keying accuracy of optical
connectors for polarization
maintaining fibre
£38.40 members, £40.00
non-membersGEL/86/2
IEC 61340:-
Electrostatics
IEC 61340-3:-
Methods for simulation of
electrostatic effects
IEC 61340-3-1:2006
(Edition 2)
Human body model (HBM)
electrostatic discharge waveforms
£38.40 members, £40.00
non-membersGEL/101
IEC 61340-3-2:2006
(Edition 2)
Machine model (MM) electrostatic
discharge test waveforms
£35.20 members, £36.67
non-membersGEL/101
IEC 61400:-
Wind turbines
IEC 61400-25:-
Communications for monitoring
and control of wind power plants
IEC 61400-25-1:2006
Overall description of principles
and models
£92.80 members, £96.67
non-membersPEL/88
IEC 61400-25-2:2006
Information models
£168.00 members, £175.00
non-membersPEL/88
IEC 61400-25-3:2006
Information exchange models
£92.80 members, £96.67
non-membersPEL/88
Page 63 of 71IEC PUBLICATIONS
IEC 61400-25-5:2006
Conformance testing
£116.80 members, £121.67
non-membersPEL/88
IEC 61672:-
Electroacoustics. Sound level
meters
IEC 61672-3:2006
Periodic tests
£56.00 members, £58.33
non-membersEPL/29
IEC 61753:-
Fibre optic interconnecting devices
and passive components
performance standard
IEC 61753-101-3:2006
Fibre management systems for
category U. Uncontrolled
environment
£76.80 members, £80.00
non-membersGEL/86/2
IEC 61788:-
Superconductivity
IEC 61788-2:2006
(Edition 2)
Critical current measurement. DC
critical current of Nb3Sn composite
superconductors
£100.80 members, £105.00
non-membersL/-/90
IEC 61788-7:2006
(Edition 2)
Electronic characteristic
measurements. Surface resistance
of superconductors at microwave
frequencies
£92.80 members, £96.67
non-membersL/-/90
IEC/TR 61804:-
Function blocks (FB) for process
control
IEC/TR 61804-4:2006
EDD interoperability guideline
£131.20 members, £136.67
non-membersAMT/7
IEC 61937:-
Digital audio. Interface for
non-linear PCM encoded audio
bitstreams applying IEC 60958
IEC 61937-8:2006
Non-linear PCM bitstreams
according to the windows media
audio (WMA) professional format
£41.60 members, £43.33
non-membersEPL/100
IEC/TR 61948:-
Nuclear medicine instrumentation.
Routine tests
IEC/TR 61948-4:2006
Radionuclide calibrators
£20.80 members, £21.67
non-membersCH/62/3
IEC 61987:-
Industrial-process measurement
and control. Data structures and
elements in process equipment
catalogues
IEC 61987-1:2006
Measuring equipment with
analogue and digital output
£116.80 members, £121.67
non-membersGEL/65/2
IEC/TS 62045:-
Multimedia security. Guideline for
privacy protection of equipment
and systems in and out of use
IEC/TS 62045-1:2006
General
£51.20 members, £53.33
non-membersEPL/100
IEC 62056:-
Electricity metering. Data
exchange for meter reading, tariff
and load control
IEC 62056-46:-
Data link layer using HDLC
protocol
AMENDMENT 1:December 2006
£27.20 members, £28.33
non-membersPEL/13
IEC 62056-47:2006
COSEM transport layers for IPv4
networks
£100.80 members, £105.00
non-membersPEL/13
IEC 62056-53:2006
(Edition 2)
COSEM application layer
£192.00 members, £200.00
non-membersPEL/13
IEC 62153:-
Metallic communication cable test
methods
IEC 62153-4-8:2006
Electromagnetic compatibility
(EMC). Capacitive coupling
admittance
£35.20 members, £36.67
non-membersEPL/46
Page 64 of 71IEC PUBLICATIONS
IEC 62257:-
Recommendation for small
renewable energy and hybrid
systems for rural electrification
IEC 62257-7-1:2006
Generators. Photovoltaic arrays
£168.00 members, £175.00
non-membersGEL/82
IEC 62271:-
High-voltage switchgear and
controlgear
IEC 62271-300:2006
Seismic qualification of alternating
current circuit-breakers
£76.80 members, £80.00
non-membersPEL/17/1
IEC 62337:2006
Commissioning of electrical,
instrumentation and control
systems in the process industry.
Specific phases and milestones
£84.80 members, £88.33
non-membersGEL/65
IEC 62339:-
Modular component interfaces for
surface-mount fluid distribution
components
IEC 62339-1:2006
Elastomeric seals
£27.20 members, £28.33
non-membersGEL/65/4
IEC 62343:-
Dynamic modules
IEC 62343-1-3:2006
Performance standards. Dynamic
gain tilt equalizer with pigtails for
use in controlled environments
(category C)
£41.60 members, £43.33
non-membersGEL/86/3
IEC 62347:2006
Guidance on system dependability
specifications
£92.80 members, £96.67
non-membersDS/1
IEC/TR 62350:2006
Guide on the correct use of
residual current-operated
protective devices (RCDs) for
household and similar use
£84.80 members, £88.33
non-membersPEL/23/1
IEC 62382:2006
Electrical and instrumentation loop
check
£64.00 members, £66.67
non-membersGEL/65
IEC 62392:2006
Suitability of typical electrical
insulating material (EIM) for
polymer recycling
£64.00 members, £66.67
non-membersGEL/15
IEC/TS 62441:2006
Accidentally caused candle flame
ignition for audio/video,
communication and information
technology equipment
£32.00 members, £33.33
non-membersEPL/108
IEC/TR 62461:2006
Radiation protection
instrumentation. Determination of
uncertainty in measurement
£116.80 members, £121.67
non-membersNCE/2
IEC CISPR 15:-
Limits and methods of
measurement of radio disturbance
characteristics of electrical lighting
and similar equipment
AMENDMENT 1:October 2006
£32.00 members, £33.33
non-membersGEL/210/11
IEC/PAS PUBLICATIONS
IEC/PAS 62500:2006
Process management for avionics.
Guide for defining and performing
highly accelerated tests in avionic
systems
£92.80 members, £96.67
non-membersGEL/107
ISO PUBLICATIONS
ISO 180:-
Plastics. Determination of Izod
impact strength
AMENDMENT 1:December 2006
£12.80 members, £13.33
non-membersPRI/21
ISO 839:-
Milling machine arbors with 7/24
tapers
ISO 839-1:2006
(Edition 2)
Dimensions
£35.20 members, £36.67
non-membersMTE/5
Page 65 of 71ISO PUBLICATIONS
ISO 845:2006
(Edition 3)
Cellular plastics and rubbers.
Determination of apparent density
£30.40 members, £31.67
non-membersPRI/72
ISO 1017:2006
(Edition 3)
Brown coals and lignites.
Determination of acetone- soluble
material (resinous substances) in
the benzene-soluble extract
£30.40 members, £31.67
non-membersPTI/16
ISO 1522:2006
(Edition 3)
Paints and varnishes. Pendulum
damping test
£46.40 members, £48.33
non-membersSTI/10
ISO 1739:2006
(Edition 2)
Butter. Determination of the
refractive index of the fat
(reference method)
£30.40 members, £31.67
non-membersAW/5
ISO 2692:2006
(Edition 2)
Technical drawings. Geometrical
tolerancing. Maximum material
requirement, minimum material
requirement, reciprocity
requirement
£86.40 members, £90.00
non-membersTDW/4
ISO 2780:2006
(Edition 3)
Milling cutters with tenon drive.
Interchangeability dimensions for
cutter arbors. Metric series
£35.20 members, £36.67
non-membersMTE/5
ISO 3842:2006
(Edition 4)
Road vehicles. Fifth wheels.
Interchangeability
£40.00 members, £41.67
non-membersAUE/13
ISO 3889:2006
(Edition 2)
Milk and milk products.
Specification of Mojonnier-type fat
extraction flasks
£35.20 members, £36.67
non-membersAW/5
ISO 4568:2006
(Edition 3)
Shipbuilding. Sea-going vessels.
Windlasses and anchor capstans
£46.40 members, £48.33
non-membersSME/32/4
ISO 4869:-
Acoustics. Hearing protectors
ISO 4869-2:-
Estimation of effective A-weighted
sound pressure levels when
hearing protectors are worn
CORRIGENDUM 1:September 2006
PH/7
ISO 5418:-
Iron ores. Determination of copper
content
ISO 5418-1:2006
(Edition 2)
2,2'-biquinolyl spectrophotometric
method
£51.20 members, £53.33
non-membersISE/58
ISO 5418-2:2006
Flame atomic absorption
spectrophotometric method
£51.20 members, £53.33
non-membersISE/58
ISO 5659:-
Plastics. Smoke generation
ISO 5659-2:2006
(Edition 2)
Determination of optical density by
a single-chamber test
£94.40 members, £98.33
non-membersPRI/26
ISO 5667:-
Water quality. Sampling
ISO 5667-1:2006
(Edition 2)
Guidance on sampling
programmes and techniques
£86.40 members, £90.00
non-membersEH/3/6
ISO 6070:-
Auxiliary tables for vibration
generators. Methods of describing
equipment characteristics
CORRIGENDUM 1:September 2006
GME/21
ISO 6993:-
Buried, high-impact poly(vinyl
chloride) (PVC-HI) piping systems
for the supply of gaseous fuels
Page 66 of 71ISO PUBLICATIONS
ISO 6993-2:2006
Fittings at a maximum operating
pressure of 200 mbar (20 kPa)
£64.00 members, £66.67
non-membersPRI/88/2/P6
ISO 7500:-
Metallic materials. Verification of
static uniaxial testing machines
ISO 7500-2:2006
(Edition 2)
Tension creep testing machines.
Verification of the force applied
£64.00 members, £66.67
non-membersISE/NFE/4/1
ISO 8510:-
Adhesives. Peel test for a
flexible-bonded-to-rigid test
specimen assembly
ISO 8510-2:2006
(Edition 2)
180$0D peel
£35.20 members, £36.67
non-membersPRI/52
ISO/IEC 8802:-
Information technology.
Telecommunications and
information exchange between
systems. Local and metropolitan
area networks. Specific
requirements
ISO/IEC 8802-11:-
Wireless LAN medium access
control (MAC) and physical layer
(PHY) specifications. Amendment
6: Medium access
AMENDMENT 6:December 2006
£160.00 members, £166.67
non-membersIST/6
ISO/IEC 8824:-
Information technology. Abstract
syntax notation one (ASN.1)
ISO/IEC 8824-1:-
Specification of basic notation
AMENDMENT 3:December 2006
£94.40 members, £98.33
non-membersIST/6
ISO/IEC 8824-2:-
Information object specification
CORRIGENDUM 1:December 2006
IST/6
ISO/IEC 8825:-
Encoding rules
ISO/IEC 8825-3:-
Specification of encoding control
notation (ECN)
AMENDMENT 2:December 2006
£12.80 members, £13.33
non-membersIST/6
ISO/IEC 8825-4:-
Information technology. ASN.1
encoding rules: XML encoding
rules (XER)
AMENDMENT 2:December 2006
£12.80 members, £13.33
non-membersIST/6
ISO 8873:-
Rigid cellular plastics.
Spray-applied polyurethane foam
ISO 8873-1:2006
Material specifications
£46.40 members, £48.33
non-membersPRI/72
ISO 9096:-
Stationary source emissions.
Manual determination of mass
concentration of particulate matter
CORRIGENDUM 1:December 2006
EH/2/1
ISO 9682:-
Iron ores. Determination of
manganese content
ISO 9682-2:2006
Periodate spectrophotometric
method
£56.00 members, £58.33
non-membersISE/58
ISO 9683:-
Iron ores. Determination of
vanadium content
ISO 9683-1:2006
BPHA spectrophotometric method
£51.20 members, £53.33
non-membersISE/58
ISO 9816:2006
(Edition 2)
Passenger cars. Power-off reaction
of a vehicle in a turn. Open-loop
test method
£73.60 members, £76.67
non-membersAUE/15
ISO 10303:-
Industrial automation systems and
integration. Product data
representation and exchange
ISO 10303-112:2006
Integrated application resource:
modelling commands for the
exchange of procedurally
represented 2D CAD models
£124.80 members, £130.00
non-membersAMT/4
Page 67 of 71ISO PUBLICATIONS
ISO 10303-503:-
Application interpreted construct:
geometrically bounded 2D
wireframe
CORRIGENDUM 1:December 2006
AMT/4
ISO 10535:2006
(Edition 2)
Hoists for the transfer of disabled
persons. Requirements and test
methods
£110.40 members, £115.00
non-membersCH/173/-/6
ISO 10813:-
Vibration generating machines.
Guidance for selection
ISO 10813-1:-
Equipment for environmental
testing
CORRIGENDUM 1:December 2006
GME/21/2
ISO 11535:2006
(Edition 2)
Iron ores. Determination of various
elements. Inductively coupled
plasma atomic emission
spectrometric method
£76.80 members, £80.00
non-membersISE/58
ISO 11565:2006
(Edition 2)
Road vehicles. Spark plugs. Test
methods and requirements
£46.40 members, £48.33
non-membersMCE/9
ISO 11898:-
Road vehicles. Controller area
network (CAN)
ISO 11898-3:-
Low-speed, fault-tolerant,
medium-dependent interface
CORRIGENDUM 1:December 2006
AUE/16
ISO 11962:-
Micrographics. Image mark (blip)
used with 16 mm and 35mm roll
microfilm
CORRIGENDUM 1:December 2006
IDT/1/2
ISO 13041:-
Test conditions for numerically
controlled turning machines and
turning centres
ISO 13041-5:2006
Accuracy of feeds, speeds and
interpolations
£46.40 members, £48.33
non-membersMTE/1
ISO 13584:-
Industrial automation systems and
integration. Parts library
ISO 13584-511:2006
Mechanical systems and
components for general use.
Reference dictionary for fasteners
£168.00 members, £175.00
non-membersAMT/4
ISO 13994:-
Clothing for protection against
liquid chemicals. Determination of
the resistance of protective clothing
materials to penetration by liquids
under pressure
CORRIGENDUM 1:October 2006
PH/3/3
ISO 14224:2006
(Edition 2)
Petroleum, petrochemical and
natural gas industries. Collection
and exchange of reliability and
maintenance data for equipment
£160.00 members, £166.67
non-membersPSE/17
ISO 14229:2006
(Edition 2)
Road vehicles. Unified diagnostic
services (UDS). Specification and
requirements
£198.40 members, £206.67
non-membersAUE/16
ISO/IEC 14496:-
Information technology. Coding of
audio-visual objects
ISO/IEC 14496-16:2006
(Edition 2)
Animation framework extension
(AFX)
£168.00 members, £175.00
non-membersIST/37
ISO 14505:-
Ergonomics of the thermal
environment. Thermal environment
in vehicles
ISO 14505-2:2006
Determination of equivalent
temperature
£76.80 members, £80.00
non-membersPH/9/1
ISO 14890:-
Conveyor belts. Specification for
rubber or plastics covered
conveyor belts of textile
construction for general use
CORRIGENDUM 1:November 2006
PRI/67
Page 68 of 71ISO PUBLICATIONS
ISO 15071:-
Hexagon bolts with flange. Small
series. Product grade A
CORRIGENDUM 1:December 2006
FME/9/3
ISO 15072:-
Hexagon bolts with flange with
metric fine pitch thread. Small
series. Product grade A
CORRIGENDUM 1:December 2006
FME/9/3
ISO/IEC 15444:-
Information technology. JPEG
2000 image coding system
ISO/IEC 15444-9:-
Interactivity tools, APIs and
protocols
AMENDMENT 1:December 2006
£12.80 members, £13.33
non-membersIST/37
ISO 15662:2006
Intelligent transport systems. Wide
area communication. Protocol
management information
£89.60 members, £93.33
non-membersEPL/278
ISO/IEC 15693:-
Identification cards. Contactless
integrated circuit cards. Vicinity
cards
ISO/IEC 15693-2:2006
(Edition 2)
Air interface and initialization
£12.80 members, £13.33
non-membersIST/17
ISO 15901:-
Pore size distribution and porosity
of solid materials by mercury
porosimetry and gas adsorption
ISO 15901-2:2006
Analysis of mesopores and
macropores by gas adsorption
£86.40 members, £90.00
non-membersLBI/37
ISO 16100:-
Industrial automation systems and
integration. Manufacturing software
capability profiling for
interoperability
ISO 16100-4:2006
Conformance test methods, criteria
and reports
£86.40 members, £90.00
non-membersAMT/5
ISO 16234:2006
Heavy commercial vehicles and
buses. Straight ahead braking on
surfaces with split coefficient of
friction. Open test method
£60.80 members, £63.33
non-membersAUE/15
ISO 16792:2006
Technical product documentation
(TPD). Digital product definition,
data practices
£134.40 members, £140.00
non-members
TDW/4
ISO/IEC 17345:2006
(Edition 2)
Information technology. Data
interchange on 130 mm rewritable
and write once read many ultra
density optical (UDO) disk
cartridges. Capacity: 30 Gbytes
per cartridge. First generation
£160.00 members, £166.67
non-membersICT/-/1
ISO 17775:2006
Aircraft. Ground service
connections. Potable water,
toilet-flush water and toilet drain
£30.40 members, £31.67
non-membersACE/69
ISO/TR 18124:2006
Plastics piping systems. Multilayer
M (metal) pipes. Test method for
strength of the weld line in the
metal layer and bonding between
layers by use of a cone
£35.20 members, £36.67
non-membersPRI/88/4
ISO 18909:-
Photography. Processed
photographic colour films and
paper prints. Methods for
measuring image stability
CORRIGENDUM 1:December 2006
CPW/42
ISO 19092:-
Financial services. Biometrics
ISO 19092-1:2006
Security framework
£134.40 members, £140.00
non-membersIST/12
ISO/IEC 19798:2006
Method for the determination of
toner cartridge yield for colour
electrophotographic printers and
multi-function devices that contain
printer components
£64.00 members, £66.67
non-membersIST/3
ISO/IEC 21000:-
Information technology. Multimedia
framework (MPEG-21)
Page 69 of 71ISO PUBLICATIONS
ISO/IEC 21000-6:-
Rights data dictionary. Amendment
1: Digital item identifier relationship
types
AMENDMENT 1:December 2006
£12.80 members, £13.33
non-membersIST/37
ISO/IEC 21000-10:-
Digital item processing.
Amendment 1: Additional C++
bindings
AMENDMENT 1:December 2006
£12.80 members, £13.33
non-membersIST/37
ISO 21078:-
Determination of boron (III) oxide in
refractory products
ISO 21078-2:2006
Acid extraction method for the
determination of boron (III) oxide in
binder components
£46.40 members, £48.33
non-membersRPI/1
ISO 21487:2006
Small craft. Permanently installed
petrol and diesel fuel tanks
£40.00 members, £41.67
non-membersGME/33
ISO 21849:2006
Aircraft and space. Industrial data.
Product identification and
traceability
£110.40 members, £115.00
non-membersACE/1
ISO 22489:2006
Microbeam analysis. Electron
probe microanalysis. Quantitative
point analysis for bulk specimen
using wavelength dispersive X-ray
spectroscopy
£56.00 members, £58.33
non-membersCII/9
ISO/IEC 23002:-
Information technology. MPEG
video technologies
ISO/IEC 23002-1:2006
Accuracy requirements for
implementation of integer-output
8x8 inverse discrete cosine
transform
£51.20 members, £53.33
non-membersIST/37
ISO/IEC 23360:-
Linux standard base (LSB) core
specification 3.1
ISO/IEC 23360-1:2006
Generic specification
£233.60 members, £243.33
non-membersIST/5
ISO/IEC 23360-2:2006
Specification for IA32
£124.80 members, £130.00
non-membersIST/5
ISO/IEC 23360-3:2006
Specification for IA64
£134.40 members, £140.00
non-membersIST/5
ISO/IEC 23360-4:2006
Specification for AMD64
£124.80 members, £130.00
non-membersIST/5
ISO/IEC 23360-5:2006
Specification for PPC32
£124.80 members, £130.00
non-membersIST/5
ISO/IEC 23360-6:2006
Specification for PPC64
£124.80 members, £130.00
non-membersIST/5
ISO/IEC 23360-7:2006
Specification for S390
£124.80 members, £130.00
non-membersIST/5
ISO/IEC 23360-8:2006
Specification for S390X
architecture
£124.80 members, £130.00
non-membersIST/5
ISO/IEC 24711:2006
Method for determination of ink
cartridge yield for colour inkjet
printers and multi-function devices
that may contain printer
components
£81.60 members, £85.00
non-membersIST/3
ISO/IEC 24712:2006
Colour test pages for measurement
of office equipment consumable
yield
£81.60 members, £85.00
non-membersIST/3
ISO/IEC 24738:2006
Information technology. Icon
symbols and functions for
multimedia link attributes
£68.80 members, £71.67
non-membersICT/-/1
Page 70 of 71ISO PUBLICATIONS
ISO/IEC 25436:2006
Information technology. Eiffel:
analysis, design and programming
language
£160.00 members, £166.67
non-membersIST/5
ISO/IEC 26300:2006
Information technology. Open
document format for office
applications (open document) v1.0
£241.60 members, £251.67
non-membersIST/41
ISO/IEC/TR 26927:2006
Information technology.
Telecommunications and
information exchange between
systems. Corporate
telecommunication networks.
Mobility for enterprise
communications
£84.80 members, £88.33
non-membersIST/6
ISO/IEC GUIDE 75:2006
Strategic principles for future IEC
and ISO standardization in
industrial automation
£86.40 members, £90.00
non-membersGEL/3
ISO/PAS PUBLICATIONS
ISO/PAS 11154:2006
Road vehicles. Roof load carriers
£134.40 members, £140.00
non-membersAUE/9
Page 71 of 71ISO/PAS PUBLICATIONS