Download - Bucket Elevator 200 TPH
-
8/12/2019 Bucket Elevator 200 TPH
1/28
BucketElevator
200 Metric TPH
OWNER'S MANUAL
(12-98) # 19010800
-
8/12/2019 Bucket Elevator 200 TPH
2/28
Table of Contents
Warranty Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . Inside Front Cover Operator Qualifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1Safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-4Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Dimensional Drawing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5Pre-Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6Lubrication and Storage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-7Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Repair Parts:Head Section . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-9Boot Section . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10Ladders and Cages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11Mid Sections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12Belt and Bucket Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12Service Platform . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13Rest Platform Sections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14-15Two-Way Valve . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Transitions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16Adjustable Elbow . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Assembly Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18-24
Warranty
CrustBuster/Speed King, Inc. of Dodge City, Kansas, warrants consumer products,so far as the same is of our own manufacture, against defects in material andworkmanship under normal and reasonable use for a period of one (1) year afterdate of delivery to the original purchaser. Our obligation under this warranty islimited, however, to furnishing a replacement part for a defective part, or at ouroption to repair the defective parts without charge, either method F.O.B. our works,provided the consumer gives CrustBuster/Speed King,Inc. written notice within ten(10) days after said part appears to be defective and affords CrustBuster/SpeedKing,Inc. an opportunity to inspect. Unless otherwise expressly agreed to byCrustBuster/Speed King,Inc., the consumer shall bear the expense of installation.
CrustBuster/Speed King, Inc. will not be liable for consequential damages where theloss is commercial, including but not limited to loss of profit, delays or expenses.
This warranty sets forth the extent of our liability. The foregoing is in lieu of all otherwarranties, expressed or implied, including any warranties that extend beyond thedescription of the product.
-
8/12/2019 Bucket Elevator 200 TPH
3/28
1
Operator Qualifications
Operation of this Bucket Elevator shall be limited to competent and experienced persons. In addition,anyone who will operate or work around a Bucket Elevator must use good common sense. In order to bequalified, he or she must also know and meet all other requirements, such as:
1. Some regulations specify that no one under the age of 16 may operate power machinery.
It is your responsibility to know what these regulations are in your area or situation.
2. Current OSHA regulations state in part: "At the time of initial assignment and at least annuallythereafter the employer shall instruct EVERY employee in the safe operation of servicing ofall equipment with which the employer is, or will be involved."
3. Unqualified persons are to STAY OUT of the work area.
4. A person who has not read and understood all operating and safety instructions is not
qualified to operate the machinery.
FAILURE TO READ THIS BUCKET ELEVATOR MANUAL AND ITSSAFETY INSTRUCTIONS IS A MISUSE OF THE EQUIPMENT.
Sign Off SheetAs a requirement of OSHA, it is necessary for the employer to train the employee in the safe operation andsafety procedures with this Bucket Elevator. We include this sign off sheet for your convenience andpersonal record keeping.
DATE EMPLOYER EMPLOYER'S SIGNATURE
-
8/12/2019 Bucket Elevator 200 TPH
4/28
2
BE ALERT!Your Safety is involved.
General Safety Statement
WATCH FOR THIS SYMBOL. IT POINTS OUT IMPORTANT SAFETYPRECAUTIONS. IT MEANS "ATTENTION ))) BECOME ALERT!"
YOUR SAFETY IS INVOLVED.
It is your responsibility as an owner, operator, or supervisor to know and instruct everyone using thisBucket Elevator at the time of initial assignment and at least annually thereafter, of the proper operation,precautions, and work hazards which exist in the operation of this Bucket Elevator in accordance withOSHA Regulations.
Safety Is No Accident
The following safety instructions, combined with common sense, will save your equipment from needlessdamage and the operator from unnecessary exposure to personal hazard. Pay special attention to thecaution notes in the text. Review this manual at least once each year with new and/or experiencedoperators.
1. Read and understand the operator's manual before operating this Bucket Elevator.Failure to do so is considered a misuse of the equipment.
2. Make sure Bucket Elevator is secure before operating.
3. Always keep children away from Bucket Elevator when operating.
4. The motor controls and reset button must be located so that the operator has a full viewof the entire operation.
5. During regular operation of the Bucket Elevator, one person should be in a position tomonitor the operation. A second person should always be nearby to shutdown theBucket Elevator in case of an emergency.
6. Make sure everyone that is not directly involved with the operation is out of the workarea before beginning the operation.
7. Keep the work area clear of grease, oil, water, and other objects that could cause a slipor a fall.
-
8/12/2019 Bucket Elevator 200 TPH
5/28
3
8. Make sure all safety devices, shields, and guards are in place and are functional beforebeginning the operation.
9. Shut off power to adjust, service, or clean the Bucket Elevator.
10. Keep hands, feet, and clothing away from moving parts. It is a good idea to remove alljewelry before starting the operation.
11. Visually inspect the Bucket Elevator periodically during operation for signs of excessivevibration, loose fasteners, and unusual noises.
Electric Safety1. Electric motors and controls should be wired by a qualified electrician and meet all
standards set by Federal, State, and Local Electrical Codes.
2. Make certain electric motors are grounded.
3. A magnetic starter should be used to protect your motor.
4. Your motor must have a manual reset button.
5. Electrical power must be disconnected before resetting your motor.
6. A main power disconnect switch, with the ability to be locked in the off position, shouldbe provided. The switch should be locked in the off position whenever work is to bedone on the Bucket Elevator or the Bucket Elevator is going to be left unattended.
7. Disconnect power before resetting motor overload.
CAUTION1. Read and understand instruction manual before operating.
2. Keep all safety shields and devices in place.
3. Make certain everyone is clear before operating machine.
4. Keep hands, feet, and clothing away from moving parts.
5. Shut off power to adjust, service, or clean.
6. Make sure machine is secured before operating.
7. Disconnect power before resetting motor overload.
8. Make certain electric motors are grounded.
-
8/12/2019 Bucket Elevator 200 TPH
6/28
4
DANGER
KEEP HANDS AND FEET AWAY FROM INTAKE
General Information
Read this manual carefully before attempting to erect or operate your new Bucket Elevator. Then, keepit handy for reference. It contains not only step-by-step assembly instructions, but also comprehensive
operation, maintenance, and parts replacement data. Careful observation of the instructions in this manualcan add greatly to the life of your equipment and assure satisfactory performance.
The Bucket Elevator handles most free flowing bulk materials efficiently and reliably. Specially engineeredfor service with corrosive material such as fertilizer, the Bucket Elevators are constructed of carefullyselected corrosion-resistant components. Lift buckets are made of durable and lightweight linearpolyethylene. Heavy duty bearings are protected by dust seals. Seams are welded continuously andflange joints are sealed.
Specifications
ENGLISH 218 TPH
METRIC 200 Metric TPH
BUCKET SIZE 15" x 7"
MEDIDA DE CANJILON 38.10 cm x 17.78 cm
BUCKET CENTERS 9"
MEDIDAS DE CENTRODEL CANJILON 22.86 cm
Capacity is based on 60 PCF Material.
Additional or specific information is always available on request from the factory.
Specifications are subject to change without notice.
-
8/12/2019 Bucket Elevator 200 TPH
7/28
5
English Metric
A 49" 124.5 cm
B 64" 162.6 cm
C 99 1/8" 251.8 cm
D 108 1/2" 275.6 cm
E 56 1/4" 142.8 cm
F 23 9/16" 59.9 cm
G 12" 30.5 cm
H 8" 20.3 cm
I 23" 58.4 cm
J 60" 152.4 cm
K 8 7/16" 21.4 cm
L 10 1/8" 25.7 cm
M 34" 86.4 cm
N 21 3/8" 54.3 cm
218 TPH
200 Metric TPH
Bucket SizeMedida de la cubeta de
el elevador
15" x 7"38.10 cm x 17.78 cm
Bucket CentersMedidas de cen tro
de la cubeta
9"22.86 cm
Dimensional Drawing
-
8/12/2019 Bucket Elevator 200 TPH
8/28
6
Pre-Operation Check List" Before operating your Bucket Elevator for the first time, check the following:
1. Check the entire installation for security. Be sure all bolts are tight. Be sure bracing and guys aresecure. Also, see that safety shields, inspection covers and devices are in place.
2. Check gear reducer lubricant level.3. Check adjustment of drive and lift belts.
" After a few hours of operation, check and readjust all belts to compensate for initial stretch.
" After the first 150 hours of operation, change the oil in the gear reducer.
" Before each elevator operation, check and service the elevator as follows:1. Adjust lift belt tension.2. Adjust v-belt (motor drive belt) tension.3. Check drive chain and lubricate as required.4. Check gear reducer and add lubricant as required.5. Check head and boot pulley bearings and lubricate as required.6. Check for caked or packed deposits or obstructions in the elevator.
Operation SequenceSTART-UP
Start elevator with buckets empty. Run empty for a few minutes to flex the belt and check lift beltalignment and tension in accordance with the Belt Tension Adjustment and Alignment Section on page21.
STOP Stop elevator after feed is discontinued and all material is discharged. Clean outelevator after each use.
FEED Feed material into elevator at a uniform rate within rated elevator capacity.
PERIODIC CLEANOUTTo maintain optimum performance periodically check for restrictions in the elevatorinput and ouput sections. Remove all caked or packed deposits. The removablecleanout gates facilitate cleaning of the boot section. Clean all residue or deposits fromthe buckets. Clean any deposits from the head pulley.
LubricationLubricate the elevator in accordance with the following lubrication schedule.
LUBRICATION SCHEDULE
ITEM LUBRICANT SCHEDULE
Pulley and CountershaftBearings
Bearing grease appliedat zerks
Every 4 hours whe n conveying tripolyphosphate.Every 10 hours when conveying nitrate. Every 30days when conveying grains or feeds.
Drive Cha in Bearing grease appliedon chain
Every 4 hours whe n conveying tripolyphosphate.Every 10 hours when conveying nitrate. Every 30days when conveying grains or feeds.
Gear Reducer Ref er to G ear R educer M anual.
Motor Refer to M otor M anual.
-
8/12/2019 Bucket Elevator 200 TPH
9/28
7
Shutdown and StorageFor temporary shutdown
1. Discontinue feed and empty elevator before shutting off power.2. Release tension on lift belt and v-belts.3. Clean out elevator boot and remove residue.
For extended shutdown1. Discontinue feed and empty elevator before shutting off power.2. Release tension on lift belt and v-belts.3. Clean elevator thoroughly.4. Lubricate bearings and chain drive.5. Cover motor and drive for weather protection.6. Cover input hopper.7. Operate elevator periodically during extended shutdown to flex and lubricate parts.
TroubleshootingIf the Bucket Elevator malfunctions, the source of faulty operation may frequently be found by observingthe nature of the fault and applying some simple checks and remedies to correct the malfunction. Thefollowing troubleshooting table is provided for this purpose.
TROUBLE POSSIBLE CAUSES REMEDY
1. Normal capac i tycannot be attained.
Material is bridging at inlet.
Motor not developing operational RPM.
Material caked on buckets.
Correct method of feeding to insureeven feed at elevator's rated capacity.
Correct power source problem.
Clean buckets.
2. Unit stalls or plugs up.
Belt has to o much slack causing bucke tsto jam.
Motor not developing operational RPM.
Discharge spout or down spoutingplugged.
Slipping drive.
Make adjustment at take-up bolts.
Correct power source problem.
Check a ll spouting fo r foreign m aterial,build-up, dents and turns which mayimpede material flow.
Adju st driv e belt s and roller c haintension.
3. Noisy ope ration, i.e.,buckets rattling.
Elevator out of plumb.
Belt too loose or not centered on pulleys.
Material caked on pul leys.
Damaged or loose buckets.
Straighten elevator and plum b.Position braces so elevator is notforced out of alignment when attachedto structu res which ma y shift withloading or unloading.
Take up be lt at splice, re-align andtighten belt with take-up bolts.
Clean pulleys.
Replace or tighten buckets.
4. Pul ley drags or doesnot turn.
Frozen bearing. Lubricate or replace bearing.
-
8/12/2019 Bucket Elevator 200 TPH
10/28
8
H
eadSectionRepairParts
w
/ShaftMountGearBox
2
15/16"Shaft
20
0MetricTPH
1
-
8/12/2019 Bucket Elevator 200 TPH
11/28
9
Head Section Repair Partsw/ Shaft Mount Gear Box
2 15/16" Shaft - 200 Metric TPH
15 & 20 Hp
Item Qty Part No. Description61910600 Head Assembly
1 1 81591000 Spout Weldment2 1 15392400 Back Up Strap3 1 15393200 Wiper 4 1 81597700 Hood Weldm ent5 4 15508500 Port Cover 12 x 126 16 16668600 Clip7 2 81586000 Side Weldment8 1 03174000 Pulley 24" Crowned
w/Hub & Bushing9 1 15401300 Shaft 2 15/16" x 29"
10 1 15380900 Side Plate11 2 03172400 Bearing 2 15/16" PB12 2 81595100 Shaft Seal Assy 2 7/16"13 1 16683500 Motor Mount Side LH14 2 15400500 Motor M ount Ex t.
15 1 16682700 Motor Mount Side RH16 2 15395700 Motor Mount Strap17 1 60000700 Motor Mount Ass embly
Item Qty Part No. Description18 1 15394000 Anchor
19 1 15417900 Belt Guard Bracket20 1 06095400 Reducer Bushing
2 7/16" TDT421 1 06096200 Reducer Backstop
106094700 Reducer Dodge TXT415* 23 1 00414300 Bush 1 7/16" SK* 24 1 04463600 Sheave 3B 8.6 SK* 25 3 03502200 V-Belt B- 90 (50 H z)
3 03527900 V-Belt B- 83 ( 60 H z)* 26 1 04458600 Sheav e 3B 6.8 SD (50 Hz)
1 04466900 Sheav e 3B 5.6 SD (60 Hz)* 27 1 04322400 Bush 1 5/8" SDS QD* 28 1 61912200 Belt G uard Ass embly
Includes Items #29 & #30* 29 1 15420300 Guard Front
* 30 1 15419500 Guard Side* 31 1 15418700 Guard Back
* Part # 6191480 0 (Shaf t mount kit for 50 hz) or # 61915500 (S haft mount kit for 60 hz) includes these items.* These items are not Included in #61910600.
25 & 30 Hp
Item Qty Part No. Description61973400 Head Assembly
1 1 81591000 Spout Weldment2 1 15392400 Back Up Strap3 1 15393200 Wiper 4 1 81597700 Hood Weldm ent5 2 15508500 Port Cover 6 8 16668600 Clip7 2 81586000 Side Weldment8 1 03174000 Pulley 24" Crowned
w/Hub & Bushing9 1 15657000 Shaft 2 15/16" x 39"
10 1 15380900 Side Plate11 2 03172400 Bearing 2 15/16" PB12 2 81595100 Shaft Seal Assy 2 7/16"13 1 16683500 Motor Mount Side LH14 2 15400500 Motor M ount Ex t.15 1 16682700 Motor Mount Side RH16 2 15395700 Motor Mount Strap17 1 60000700 Motor Mount Ass embly
Item Qty Part No. Description18 1 15661200 Anchor
19 1 15417900 Belt Guard Bracket20 1 03206000 Reducer Bushing2 7/16" TDT6
21 1 03207800 Reducer Backstop22 1 03205200 Reducer Dodge TXT615
* 23 1 03213600 Bush 2 3/16" SK* 24 1 04463600 Sheave 3B 8.6 SK* 25 3 03502200 V-Belt B- 90 (50 H z)
3 03527900 V-Belt B- 83 ( 60 H z)* 26 1 04458600 Sheav e 3B 6.8 SD (50 Hz)
1 04466900 Sheav e 3B 5.6 SD (60 Hz)* 27 1 04465100 Bush 1 7/8" SD* 28 1 61912200 Belt G uard Ass embly
Includes Items #29 & #30* 29 1 15420300 Guard Front* 30 1 15419500 Guard Side* 31 1 15418700 Guard Back
* Part # 6199160 0 (Shaft mount kit for 50 hz) or # 61992400 (S haft mount kit for 60 hz) includes these items.* These items are not Included in #61973400.
-
8/12/2019 Bucket Elevator 200 TPH
12/28
10
Boot Section200 Metric TPH
Item Qty Part No. Description61911400 Boot Assembly
1 2 03022100 Bearing 1 15/16" PB2 2 61909800 Take-up Slide Assy3 8 16668600 Clip4 2 15508500 Port Cover 5 2 81598500 Take-up Weldment6 4 15416100 Back-up Strap7 1 81585200 Base Housing8 1 81587800 Inload Hopper Weldment
Item Qty Part No. Description9 1 15415300 Shaft 1 15/16" x 26 1/2"
10 1 81590200 Boot Roller Weldment11 4 16672800 Boot Slide12 2 15412000 Gate13 1 81589400 Housing Side RH14 1 81588600 Housing Side LH15 1 15354400 Housing Back16 2 15414600 Boot Seal17 2 15413800 Back-up Strap
-
8/12/2019 Bucket Elevator 200 TPH
13/28
11
Ladder & Cage Repair Parts
Item Part No. Description1 80457500 4' Ladder
60884400 4' Ladder Bundle82539800 5 ' Ladder 89346100 5' Ladder Bundle82540600 6 ' Ladder 89345300 6' Ladder Bundle82541400 7 ' Ladder 89344600 7' Ladder Bundle80456700 8 ' Ladder 60883600 8' Ladder Bundle82542200 9 ' Ladder 89343800 9' Ladder Bundle82525700 10' Ladder 89342000 10' Ladder Bundle
2 82526500 Ladder Bracket3 82734500 Splice Ring4 82733700 Cage Ring
89833800 Ladder Ring BundleIncludes Items 3 & 4
5 82735200 Flared Ring6 14673800 5' Ladder Cage Bar Strap
14674600 6' Ladder Cage Bar Strap14675300 7' Ladder Cage Bar Strap
*Bundles include Items 1 & 2.
Ladder Extension
Item Part No. Description60832300 Ladder Extension Bundle
Includes Items 1-3
1 80545700 52" Boot Ladder Extension2 20086500 Ex tens ion Ladder B racke t R ight3 20087300 Extension Ladder Bracket Left
-
8/12/2019 Bucket Elevator 200 TPH
14/28
12
Mid Section Repair Parts200 Metric TPH
#81601700 4' Mid Section#81645400 5' Mid Section#81646200 6' Mid Section#81647000 7' Mid Section
#81648800 9' Mid Section#81600900 10' Mid Section (Shown)
Belt & Bucket Repair Parts
200 Metric TPHItem Part No. Description
1 03178100 Belt Splice 2"2 03195500 Belt PVC 350#
16" Wide x Ft w/9" Spacing3 03177300 Buc ket 1 5" x 7 " Plas tic4 02218600 Flat Washer 5/16" SS5 01512300 Hex Nut 5/16" SS6 03176500 Elevator Bolt 5/16" x 1" SS
-
8/12/2019 Bucket Elevator 200 TPH
15/28
13
Service Platform Repair Parts200 Metric TPH
Item Qty Part No. Description1 1 81603300 Platform Weldment2 2 15453400 Hand Rail 98d"3 7 14631600 Hand Rail Brace4 4 15452600 Hand Rail 84 5/16"5 1 81604100 Platform Brace6 2 80803000 Platform Hole Cover 7 1 81364200 Manhole Cover 8 2 20082400 Hand Rail Bracket
9 2 15098700 Ladder Extensions10 2 20084000 Hand Rail Short Left11 2 15159700 Ladde r Ext. Bra ckets12 2 20083200 Hand Rail Short Right13 1 81605800 Ladder Brkt LH Door 14 1 81606600 Ladder Brkt RH Door
NOTE: The access hole may be positioned in oneof three places. (As shown above, or inposition A or B as illustrated below.) Items#6 & #7 are interchangeable.
-
8/12/2019 Bucket Elevator 200 TPH
16/28
14
Rest Platform Repair PartsRight Section200 Metric TPH
Item Qty Part No. Description61947800 Platform Assembly -Right
1 1 81655300 Platform Weldment -Right2 4 15578800 Hand Rail 69d"3 6 14631600 Hand Rail Brace4 4 15452600 Hand Rail 84 5/16"5 1 81364200 Manhole Cover 6 2 15707300 Ladder Extensions7 1 81659500 Casing Band Weldment8 1 15579600 Casing Band9 1 15709900 Kick Stop
10 4 20082400 Ladde r Extens ion Brac kets11 1 81656100 Platform Brace -Right12 1 81652000 Platform Cover
-
8/12/2019 Bucket Elevator 200 TPH
17/28
15
Rest Platform Repair PartsLeft Section200 Metric TPH
Item Qty Part No. Description
61948600 Platform Assembly -Left1 1 81654600 Platform W eldment -Left2 4 15578800 Hand Rail 69d"3 6 14631600 Hand Rail Brace4 4 15452600 Hand Rail 84 5/16"5 1 81364200 Manhole Cover 6 2 15707300 Ladder Extensions7 1 81659500 Casing Band Weldment8 1 15579600 Casing Band9 1 15709900 Kick Stop
10 4 20082400 Ladde r Extens ion Brac kets11 1 81657900 Platform Brace -Left12 1 81652000 Platform Cover
-
8/12/2019 Bucket Elevator 200 TPH
18/28
16
Repair Parts
Two-Way Valve
#69065100Item Qty Part No. Description
1 1 83494100 Valve Weldment2 1 16172900 Divider Be lt3 2 12221800 Back-up Strap
Transitions
10" Square to 10" Round#83766600
10" Adjustable Elbow#69054500
Item Qty Part No. Description1 2 83189100 Elbow Tube Weldment2 1 05507900 Clam p Band 10 " Pair
12" Square to 10" Square#81629800
-
8/12/2019 Bucket Elevator 200 TPH
19/28
17
Notes
-
8/12/2019 Bucket Elevator 200 TPH
20/28
18
Shaft Mount DriveAssembly InstructionsFigure #1
STEP 1.Refer to Figure 1.Install motor "A"to motor mount "B"using four(4) SS 3/8" x 1 3/4" HHCS, flat washers, and
hex nuts. DO NOT TIGHTEN BOLTS.
STEP 2.Refer to Figure 1.
Assemble 6.8 SD sheave and proper bushing"C"to motor shaft and 5.6 SD sheave (for 60Hz) or 8.6 SK sheave (for 50 Hz) and properbushing "D" to gearbox shaft. Using a straightedge, align sheaves moving motor to slotsprovided in motor mount. When sheaves arealigned, tighten motor bolts.
STEP 3. Refer to Figure 1.Attach guard body "E"to guard bracket "F"using two (2) SS 3/8" x 1" HHCS, hex nuts, andfour (4) flat washers.
STEP 4. Refer to Figure 1.Install belts "H"and adjust tension using bolton turnbuckle.
STEP 5. Refer to Figure 1.Attach belt guard front plate"Gto guard body"E"using sixteen (16) 5/16" x 3/4" washer headself tapping screws. Adjust guard for properclearance and tighten all bolts.
-
8/12/2019 Bucket Elevator 200 TPH
21/28
19
Mid SectionAssembly InstructionsFigure #2
Install, level and anchor the boot section onfoundation. Level it with leveling nuts or shims.The boot being level and plumb is essential forproper operation. Plumb and level bucketelevator as it is being erected.
When platforms are applicable to yourinstallation, refer to the assembly instructionspertaining to the type of platform. If a platformwill not be assembled between mid sections, boltthe flanges together using 3/8" x 1" HHCS and
hex nylock nuts.
-
8/12/2019 Bucket Elevator 200 TPH
22/28
20
Service PlatformAssembly InstructionsFigure #3
-
8/12/2019 Bucket Elevator 200 TPH
23/28
21
Service PlatformAssembly InstructionsFigure #3
STEP 1. Refer to Figure 3.Remove support plate "F" and place headsection on platform"B". Bolt head section to theplatform on the short side flange (UP leg side)using 3/8" x 1 1/2" HHCS, flat washers, and hexnylock nuts. Replace support plate "F" usingexisting bolts and bolt on top of head sectionflange (DOWN leg side) using 3/8" x 1 1/2"HHCS, flat washers, and hex nuts.
STEP 2. Refer to Figure 3.Install braces "A"to service platform "B"using1/2" x 1 1/4" HHCS, flat washers, and hex nylock
nuts. Bolt the four (4) hand rails"C"and two (2)hand rails "D" to braces "A" as shown using1/2"x 1 1/4" HHCS, flat washers, and hex nylocknuts. Bolt the two (2) upper short rails "E" tobrace "A"and head section using 1/2" x 1 1/4"HHCS, flat washers, and hex nylock nuts. Boltthe two (2) hand rail brackets "G" to the headsection end as shown using existing hardware.
Attach the two (2) lower short rails "E"to brace"A" and to brackets "G" using 1/2" x 1 1/4"HHCS, flat washers, and hex nylock nuts.
STEP 3. Refer to Figure 3.Attach ladder extensions"H"to the motor mountusing 1/2" x 2 1/2" HHCS, flat washers, and hexnylock nuts. Bolt the lower end of extensions tothe top hole of bracket on platform using 1/2" x 11/4" carriage bolt and hex nylock nuts.
STEP 4. Refer to Figure 3.If ladder extension brackets"I"are required, boltplatform brackets "J"to platform using 1/2" x 11/2" HHCS and hex nylock nuts. Attach brackets"I"to ladder extensions "H"with 1/2" x 1 1/4"HHCS, flat washers, and hex nylock nuts. Bolt
the lower end of extensions to brackets "I"with1/2" x 1 1/4" carriage bolts and hex nylock nuts.
-
8/12/2019 Bucket Elevator 200 TPH
24/28
22
NOTE:
The
RIGHT
Section
is
shown
in
illustration.
AssembleLEFT
Sectionin
samemanner.
RefertoFigure6.
betweentheflangesonthe
mid
sections
itwillbe
loca
ted
on.
Attach
using
3/8"x1"HHCSandhexnylo
cknuts.
RefertoFigure6.
using1/2"x11/2"
HHCS,
flatwashers,andhexnylocknuts.
Boltthe
asshownusing
1/2"x1
1/4"HHCS,
flatwa
shers,and
hexnylock
nuts.
to
using3/8"x11/2"HHCSandhexnuts.
Attachthelowerendofladde
rhandrailstobrackets
onplatformu
sing1/2"x11/4
"carriageboltsandhex
to
using1/2"x11/4"carriageb
olts
to
usinga1/2"x11/4"HHCS
andhex
nylocknut.
RestPlatformSe
ction
AssemblyInstructions
Figure#3
-
8/12/2019 Bucket Elevator 200 TPH
25/28
23
Ladder & Cage Assembly Instructions
Figure #4
STEP 1. Refer to Figure 4.Attach ladder bracket "B"to mid section on topof flange using 3/8" x 1 1/4" HHCS and hex nuts.Select the ladder "A" that corresponds to thelength of mid section on which the ladder is beinginstalled and bolt to bracket "B"using 1/2" x 11/2" carriage bolts and hex nylock nuts.
STEP 2. Refer to Figure 5.Assemble cage rings "A", "B", & "C" to cagestraps "D"as shown using 1/2" x 1 1/4" carriagebolts and hex nylock nuts.
STEP 3. Refer to Figure 5.Bolt the assembled cage to ladders as shownusing 1/2" x 1 1/2" carriage bolts and hex nylocknuts.
STEP 4. Refer to Figure 6.If ladder extension is applicable, bolt brackets"B" & "C" to ladder "A" using 1/2" x 1 1/2"carriage bolts and hex nylock nuts. Bolt theupper ends of ladder to lower ladder bracket"D"using 1/2" x 1 1/2" carriage bolts and hex nylocknuts. Secure extension ladder to elevator bybolting brackets "B" & "C" to flange on bootsection.
Figure #5
Figure #6
-
8/12/2019 Bucket Elevator 200 TPH
26/28
24
Figure #10
Figure #9
Figure #11
Bucket and Belt Assembly
STEP 1. Refer to Figure 7.Lay belt out on the ground or floor. Positionbuckets on the belt as they will be attached.
Attach each bucket to the belt with five (5)flathead elevator bolts. Tighten the bolts so theflathead is pulled tight and is flush with the backside of the belt.
Figure #7
STEP 2. Refer to Figure 8.Remove the input hopper panel from the bootsection and the observation door from the headsection.
STEP 3. Refer to Figure 8.Adjust take-up bolts to raise the boot pulley to thehighest position. Loop a rope over the headpulley and down throught the elevator. Attachone end to the belt and bucketassembly and pass the other endunder the boot pulley.
STEP 4. Refer to Figure 8.Pull the belt assembly into theelevator, up over the head pulley anddown under the boot pulley. Be surethe buckets are properly oriented.Position belt assembly so it can bespliced at the boot section whereinput hopper panel is removed. (SeeFig. 9.)
STEP 5. Refer to Figure 10.Pull the belt ends together andassemble the belt splice as shown.
STEP 6. Refer to Figure 11.Belt tension is set by the two stainless
steel take-up bolts which position the bootpulley. Tighten the boot pulley evenly until thebars of the pulley begin to form slight ridgesacross the belt and the belt has a flat tautappearance between the pulley bars. Theelevator pulleys are crowned to cause the beltto run center. Uneven adjustment, however,may cause the belt to run to one side.Normally it runs to the loose side. If the beltruns to one side tighten the side to which it isrunning or loosen the opposite side.
Figure #8
-
8/12/2019 Bucket Elevator 200 TPH
27/28
-
8/12/2019 Bucket Elevator 200 TPH
28/28