construction catalogue
Bolsters & Chisels
Hammers
Slater’s Ripper
Trowels & Floats
Mixers
Plumb Bob
Lines & Pins
Plumbing Tools
Glazing Tools
building, plumbing &decorating tools
power tool accessories 64
watering systems
retailer information
alphabetical / numerical index
terms and conditions 102
tool systems
saws and woodworking 50
56
general tools & measuring 40
building, plumbing & decorating tools
electrical tools 22
30
pliers and cutters 14
screwdrivers
contents
06
05
94
86
92
Featuring new Antivibration hammers, the C.K range of quality, professional specification
tools have been developed to get the job done. Uncompromising quality standards underpin
the high performance of our building, plumbing and decorating products.
build
ing,
plum
bing
& d
eco
rati
ng t
oo
lsbuilding,plum
bing & deco
rating too
ls
32 33
item number length width
T3088 250mm 10˝ 25mm 1˝
An angled grooved cutting edge to remove mortar from between bricks.Octagonal shank. Sold loose.
plugging chisel 3088
item number length blade width
T3087 3 230mm 9˝ 75mm 3˝
T3087 4 230mm 9˝ 100mm 4˝
T3087S 3 230mm 9˝ 75mm 3˝
T3087S 4 230mm 9˝ 100mm 4˝
Octagonal shank. Suitable for bricks and composite blocks.T3087S with impact absorbing, protective rubber grip. Sold loose.
brick bolster chisel 3087
item number length blade width
T3086 225mm 83/4˝ 55mm 21/4˝
T3086S 225mm 83/4˝ 55mm 21/4˝
Narrow octagonal shank design to suit the needs of the electrician.T3086S (shown) with impact absorbing, protective rubber grip. Sold loose.
electrician's bolster 3086
item number length width
T3383 06 150mm 6˝ 12mm 1/2˝
T3383 08 200mm 8˝ 19mm 3/4˝
T3383 10 250mm 10˝ 19mm 3/4˝
T3383 101 250mm 10˝ 25mm 1˝
T3383 12 300mm 12˝ 25mm 1˝
T3383 18 460mm 18˝ 19mm 3/4˝
Octagonal shank, suitable for brick, concrete and small section steel.Sold loose.
cold chisel 3383
itemnumber quantity description
T4211/1 10 25mm / 1˝ scutch combs
T4211/2 10 25mm / 1˝ scutch droves
T4211/3 10 38mm / 11/2˝ scutch combs
T4211/4 10 38mm / 11/2˝ scutch droves
Wallet of 10 spare combs or chisel bits.
spare comb / chisel bits 4211
item number size (mm / inch)
406001 25mm 1˝
406002 38mm 11/2˝
High quality carbon steel Scutch chisel supplied complete with comb bit.
scutch chisel 3091
item number weight of head
T4219 40 1135g 21/2lb
T4219 64 1816g 4lb
Drop forged high carbon steel head fully hardened and tempered.Ground and polished striking faces. Genuine hickory handle. Sold loose.
club hammer 4219
item number description
T4234 chisel and point
Drop forged high carbon steel head, hardened and tempered.Chrome plated tubular steel shaft with comfort grip. Sold loose.
mortar pick - chisel and point 4234
item number weight of head
T4232 16 454g 16oz
T4232 20 568g 20oz
Drop forged high carbon steel head, hardened and tempered. Keen, toughcutting edge with accurately ground and bevelled face. Chrome plated tubularsteel shaft with C.K comfort rubber grip. Sold loose.
brick hammer 4232
item number weight of head
T421808 3.63kg 8lb
T421812 5.44kg 12lb
A heavy, long handled version of the club hammer.Used mainly for building work. Both striking faces are precision ground,hardened & heat treated to help withstand the heavy applications.The 33˝ fibreglass shaft has a rubber collar which also absorbs the shock/impact of the blows & reducing transmission to the user.
fibreglass sledge hammers 4218
itemnumber weight description
357005 3lb one piece club hammer
Single piece steel shaft/head component forged from SAE 1055 fine graincarbon steel, hardened and tempered. Plastic moulded grip with TPE soft gripovermould.The handle is moulded onto the shaft for security.
anti vibration forged club hammer 5703
item number weight of head
T4219A 10 1000g 21/4lb
T4219A 15 1500g 31/2lb
Drop forged high carbon steel, fully hardened and tempered.Head black lacquered, ground and polished striking faces.Ash handle. Head secured by ring wedge.
club hammer 4219
chisels & bolstersRange of quality chisels manufactured fromthe finest materials, correctly hardened andtempered to British Standard 3066. Superiorpowder coated finish with ground cuttingedge. Chamfered and ground striking end foradded safety.
hammersDesigned to last, for light, heavy andspecialist applications alike.
build
ing,
plum
bing
& d
eco
rati
ng t
oo
lsbuilding,plum
bing & deco
rating too
ls
34 35
item number size description
T527010 255mm 10˝ broad heel brick trowel
T527011 275mm 11˝ broad heel brick trowel
Forged tang welded to hardened & tempered blade. Half tanged to hardwoodhandle.Taper ground & lacquered blade. Steel ferrule. Display packed.
broad heel brick trowel 5270
item number size
T529750 175 x 13mm 7 x 1/2˝
Professional quality. Flexible, hardened & tempered, taper ground blade.Comfortable, soft grip handle with finger guard. Display packed.
finger and jointing trowel 529
item number size description
T529606 150mm 6˝ pointing trowel
Hardened & tempered blade welded to heavy duty tang for strength &durability. Unique asymmetric shape, one curved edge & one straight forintricate, fine finishing. Comfortable, soft grip handle with integral finger guard.Display packed.
pointing trowel 529
item number size description
T529510 255mm 10˝ broad heel brick trowel
High carbon steel blade welded to heavy duty tang for strength & durability.Comfortable, soft grip handle with integral finger guard. Display packed.
broad heel brick trowel 529
item number size description
T5273 125mm 5˝ margin trowel
High carbon steel blade welded to heavy duty tang.Traditional wooden handle.Parallel edges for borders & working in confined spaces Display packed.
margin trowel 5273
item number size description
T527207 175mm 7˝ gauging trowel
Welded tang. Hardened & tempered, taper ground blade.Half tanged to hardwood handle. Steel ferrule. Display packed.
gauging trowel 5272
item number size description
T5060 4 100mm 4˝ pointing trowel
T5060 5 125mm 5˝
T5060 6 150mm 6˝
Welded tang. Hardened & tempered, taper ground blade.Half tanged to hardwood handle. Steel ferrule. Display packed.
pointing trowel 5060
itemnumber size description
T527111 275mm 11˝ philadelphia pattern brick trowel
Forged tang welded to hardened & tempered blade. Half tanged to hardwoodhandle.Taper ground & lacquered blade. Steel ferrule. Display packed.
philadelphia pattern brick trowel 5271
itemnumber size description
T524306 150mm 6˝ pointing trowel
Stainless steel, non-marking blade.Will not rust. Display packed.
pointing trowel - stainless steel 5243
itemnumber size description
T524207 175mm 7˝ gauging trowel
Stainless steel, non-marking blade.Will not rust. Display packed.
gauging trowel - stainless steel 5242
itemnumber size description
T524111 280mm 11˝ philadelphia pattern brick trowel
Stainless steel, non-marking blade.Will not rust. Display packed.
philadelphia pattern brick trowel - stainless steel 5241
item number blade length blade width
T5073 37 175mm 7˝ 10mm 3/8˝
T5073 50 13mm 1/2˝
T5073 62 16mm 5/8˝
T5073 75 19mm 3/4˝
T5073 99 25mm 1˝
T5073 1 13mm 1/2˝
Professional quality. Flexible, hardened & tempered, taper ground blade.Half tanged to hardwood handle. Steel ferrule.T5073 1 with half round blade.Display packed.
finger trowel 5073
item number size description
T529311 280mm 11˝ brick trowel
High carbon steel blade welded to heavy duty tang for strength & durability.Comfortable, soft grip handle with integral finger guard. Display packed.
philadelphia pattern brick trowel 529
item number size description
T529207 180mm 7˝ gauging trowel
Hardened & tempered blade welded to heavy duty tang for strength &durability. Comfortable, soft grip handle with integral finger guard.Display packed.
gauging trowel 529
item number description
T5180 slater’s ripper
Spring steel for ease of use. Lacquered finish with polished tip.Sold loose.
slater’s ripper 5180
building trowelsSoft grip, traditional and stainless steelranges to suit every professional.
build
ing,
plum
bing
& d
eco
rati
ng t
oo
lsbuilding,plum
bing & deco
rating too
ls
36 37
item number size
T5068 280 x 120mm / 11 x 43/4˝
Top quality. Extra thin (0.65mm/23 B.W.G.) flexible, polished blade.Handle mounting is securely fastened by spot welded pins. Steel is tangedthrough poplar wood handle to fixing nut. Display packed.
finishing trowel 5068
item number size
T5298 280 x 120mm / 11 x 43/4˝
Professional quality, lightweight plasterers trowel with carbon steel blade.Tang securely fastened by spot welded pins. Soft grip, banana shaped handle.Display packed.
finishing trowel 529
item number length blade width
T5093 50 265mm 101/2˝ 13mm 1/2˝
T5093 62 265mm 101/2˝ 16mm 5/8˝
Trowel blade, hardened, tempered and ground to give correct flexibilityand balance. Display packed.
trowel and square tool 5093
item number size
T5198 13 x 16mm / 1/2 x 5/8˝
Fully hardened & tempered carbon steel. For finishing 13mm (1⁄2˝) & 16mm (5⁄8˝)mortar joints. Display packed.
brick jointer 5198
itemnumber size
T5264 405 x 115mm / 16 x 41/2˝
Pointed, carbon steel blade flooring trowel for easy access into corners.Wooden handle with double hang tang for balance in use. Used for applying &finishing concrete or cement floors. Display packed.
flooring trowel 5264
itemnumber size
T5069 300 x 300mm / 12 x 12˝
Aluminium blade with grooved, non-slip surface. Detachable plastic handle.Display packed.
plasterer’s hawk 5069
itemnumber size
T5299 330 x 120mm / 13 x 43/4˝
Extra large stainless steel finishing trowel with traditional, banana shapedwooden handle. Display packed.
finishing trowel - stainless steel 5299
itemnumber size
T5072 280 x 120mm / 11 x 43/4˝
Stainless steel, top quality trowel. Specification as T5068 but with thinner(0.6mm) Stainless Swedish steel blade. Display packed.
finishing trowel - stainless steel 5072
contact customer services on:Email: [email protected]
itemnumber size
T5172 280 x 140mm
T5172 18 320 x 180mm
Lightweight, moulded foam plastic with fine chequered working face.Durable and non-warping.Available in 2 sizes. Sold loose.
skimmer float 5172
itemnumber size
T5169 1 255 x 115mm / 103/4 x 41/2˝
T5169 2 255 x 115mm / 103/4 x 41/2˝
Polished carbon steel blade with welded polypropylene handle. Broad roundprofile notches, ideal for applying adhesive for floor tiles.T5169 2 with small round profile notches. Sold loose.
adhesive trowel 5169
itemnumber size
T5274 280 x 115mm / 11 x 41/2˝
Edging trowel with long curved edge, suitable for rounding off concrete corners.Steel blade with wooden handle securely fastened by 6 rivets. Display packed.
concrete edging trowel 5274
T5169 2 T5169 1
itemnumber size
T5097 165 x 165mm / 61/2 x 61/2˝
Heavy grade steel and ferruled hardwood handle. Ideal for pebble dashing and similar surface finishes. Sold loose.
harling trowel 5097
itemnumber size
T5173 280 x 140mm / 11 x 51/2˝
Lightweight, backing of moulded foam plastic with 20mm thick general purposesponge face, suitable for washing down grout. Sold loose.
sponge float 5173
itemnumber size
T5174 280 x 140mm / 11 x 51/2˝
Lightweight, durable handle bonded to dense rubber pad. Suitable for groutapplication. Sold loose.
grouting float 5174
build
ing,
plum
bing
& d
eco
rati
ng t
oo
lsbuilding,plum
bing & deco
rating too
ls
38 39
item number length description
T3520A 30m 100ft chalk line
Black lacquered die cast metal case with fold away winding handle.30m self chalking line with end support hook, 45° and 90° angle markings.Sold complete with 60g of chalk. Display packed.
chalk line 3520
item number weight description
T3492 11 300g 11oz plumb bob
Conical, fully polished cast iron plumb bob with screwed brass cord fitting.Sold loose.
plumb bob 3492
item number size description
T1881 420mm 161/2˝ power mixer
T1882 620mm 25˝
Manufactured from nickel plated steel. Suitable for use with electric drills atspeeds between 200 - 700 rpm depending on the material being mixed.Ideal for mixing paint, paste, adhesive, cement, screed, filling compounds, etc.Sold loose with descriptive card.
power mixer 1881/2
item number description
T1531 tile scriber
Tungsten carbide tipped, suitable for tiles, metal and glass.Pocket clip. Display packed.
tile scriber 1531
item number size description
T3490 170mm 61/2˝ line pins
Forged, nickel plated line pins, suitable for use in wet and dry mortar.Sold as a pair. Display packed.
line pins 3490
item number colour description
T3521B 100 blue chalk powder
T3521R 100 red
Container with 100g/4oz of chalk powder. Choice of two colours. Sold loose.
chalk powder 3521
item number length description
T3522 30m 100ft chalk line
30m of chalk line held in a lightweight thermoplastic case with winding handle.Supplied with 60g of chalk. Display packed.
chalk line 3522
T1882 T1881
item number size capacity
T2232 65mm 3-25mm
Adjustable mini pipe cutter with die cast, black lacquered body, hardened steelwheel and two flare groove rollers. Suitable for small bore pipes and those withan outside diameter up to 25mm (1˝). Fitted with replaceable C.K standardcutting wheel. For copper, brass, aluminium and thin walled steel pipes.Capacity: 3 - 25mm / 1⁄8 - 1˝. Display packed.
mini pipe cutter 2232
item number size capacity
T2231 145mm 3-30mm
Adjustable pipe cutter with die cast, black lacquered body, hardened steel wheeland two flare groove rollers.With burr remover in end piece. Supplied withreplaceable cutting wheel. For copper, brass, aluminium and thin walled steelpipes. Capacity: 3 - 30mm/1⁄8 - 11⁄8˝. Display packed.
pipe cutter 2231
item number size description
T3519 18m 60ft braided nylon chalk line
Single 18m/60ft hank. Display packed.
braided nylon chalk line 3519
item number size description
T3517 18m 60ft cotton chalk line
Single 18m/60ft hank. Display packed.
cotton chalk line 3517
order onlinewww.cki.uk.com
item number description
T5087 glass cutter
Professional quality glass cutter. 6 top quality wheels in turret head.Oiled felt washer for lubrication. Heavy nickel plated head. Lacquered handle.Display packed.
glass cutter 5087
item number size Ø description
T5082 320mm 123/4˝ double suction lifter
Lifted by one hand but with two lever operated suction pads, this tool is idealfor lifting and positioning heavier items such as refrigerators, large glass sheetsand other awkward objects. For heavier items two or more Double SuctionLifters can be used together.The heavy duty body is made of shock resistantplastic and the cups are made of natural rubber.
double suction lifter 5082
item number description
T4311 basin wrench
Square, telescopic pipe, length adjustable in 4 different positions betweenapprox 275 and 460mm total length. Sliding T-handle.Toothed, spring loadedself-adjusting forged steel jaws, swivelling by 180°. Display packed.
basin wrench 4311
60kg