SNOWMOB ILE INDEX - 1988
BULLETIN NUMBER AFFECTED MODELS SUBJECT
S88 - 001 Model line - up Starting Serial Numbers
S88 - 002 BR250M Service Data
S88 - 003 BR250TSM Service Data
S88 - 004 BR250TM Service Data
S88 - 005 CF300M Service Data
S88-006 ET340M Service Data
S88-007 EC340M Service Data
S88 - 008 ET340TM Service Data
S88 - 009 ET340TRM Service Data
S88-010 PZ480M Service Data
S88 - 011 PZ480EM Service Data
S88-012 VMX540M Service Data
S88-012A VMX540M Service Data - Update
S88 - 013 SR540M Service Data
S88 - 014 XL540M Service Data
S88 - 015 EX570M Service Data
S88 - 015A EX570M Service Data - Update
888 - 016 EX570EM Service Data
S88-016A EX570EM Service Data - Update
S88 - 017 VK540M Service Data
S88-017A VK540M Service Data - Update
S88 - 018 SV80M Service Data
S88-019 SV80EM Service Data
SNOWMOBILE INDEX - 1988
BULLETIN NUMBER AFFECTED MODELS SUBJECT
S88-020 XLjET/EC/VMX/SRjCF/ 1988 Flat Rate Tables EX Models
S88-021 BR250jPZ480 Models 1988 Flat Rate Tables
S88-022 8V80jE, VK540 Models 1988 Flat Rate Tables
888-023 EX570 Product I mprovements
588-024 VK540M Service Manual Corrections
S88-025 EX570L Carburetor Exchange Instructions
S88-026 SV80M/EM Yamaha Decal on Front Edge of Shroud
588-027 All Snowmobile Part Number Reference on '88 Dealers Literature
588-028 All Snowmobile Service Bulletin Dealers Snowmobiler's Safety Guide
S88-029 EX570M/EM Oil Tank Heat Shield Bolts Loosening
S88-030 All Snowmobile Dlrs. VK540 Update - Flat Rate Tables
S88-031 EX570M/EM, EX570L Additional Information on Set-up with S88-025 and Carburetor Setting Carburetor Modification
588-032 All Models Summer Storage Procedures - Reminder
888-033 All Snowmobile Dlrs. EX570LjM Reliability Update
S88-034 All Snowmobile Dlrs. EX570 Factory Modification
888-035 VK540EN Wrong Parts in the Crate
888-036 8V80jSV80E Assembly Manual Correction
888 -037 EX570MjEM & EX570L Carburetor/Air Box Change with S88-025 Instruct ions Carburetor Change
YAMAHA SNOWMOBILES - MOTONEIGES YAMAHA STARTING SERIAL NUMBERS - NUM:E:ROS DE D£BUT DE SERlE
September / septembre 1987 S88-00lA
1988
BR250M 83Y-000 10 1 BR250L 82F-000101 BR250K 8OV-000101 BR250J 80F-000101
BR250TSM 84A-000101 BR250TSL 82G-000101 BR250TSK 8OW-000101 BR250TSJ 8OJ-000101
BR250TM . 84E-OOO 10 1 BR250TL 82R-000101 BR250TK 81V-000101 BR250TJ 8Y1-000101
CF300M 83U-000101 CF300L 83M-000101 CF300K 81E-000101
ET340M 83T-000101 ET340L 82H-000101 ET340K 8OX-000101 ET340J 8Y2-000101
EC340M 84H-000101 EC340L 82J-000101 EC340K 80Y-000101 EC340J 8Y3-000101
ET340TM 84F-000101 ET340TL 82U-000101 ET340TK 8IA-000 10 1 ET340TJ 80E-000101
ET340TRM 84G-000101 ET340TRL 83A-000 10 1 ET340TRK 81W-000101
PZ480M 84J-000101 PZ480L 82K-000101 PZ480K 81H-000101 PZ480J 80L-000101
PZ480EM 83V-000101 PZ480EL 82L-000101 PZ480EK 81J-000101 PZ480EJ 80K-000101
VMX540M 83X-000101 VMX540L 83H-000101 VMX540K 81K-000101 VMX540J 8ON-000101
SR540M 84L-000101 SR540L 82W-000101 SR540K 81G-000101 SR540J 8YO-OOO101
XL540M 83W-000101 XL540L 82V-000101 XL540K 81R-000101 XL540J 8Y7-000101
EX570M 84M-OOO 10 1 EX570L 82M-000101
EX570EM 84N-OOO 10 1
VK540M 84R-000101
SV80M 85G-OOOIOl
SV80EM 8SH-000101
YAMAHA SNOWMOBILES - MOTONEIGES YAMAHA STARTING SERIAL NUMBERS - NUMEROS DE DEBUT DE SERlE
Bulletin S88-00lA, Page 2 of 3
·1984 .... , ....
· , i~· ......... 1981
BR250H 8V7-045101 BR250G 8UO-029101 BR250F 8R4-010101
R246-045101 R246-029101
BR250TSH 8X8-053101
R246-053101
ET250E 8L2-055101
ETIOOH 8W6-056101 ETIOOG 8T5-047101 ETIOOF 8N6-036101
E294-056101 E294-047101
ETI40H 8W9-152101 ETI40G 8T6-115101 ETI40F 8N5-103101 ETI40E 8L4-052101
E338-152101 E338-115101
EC340H 8W8-146101 EC340G 8T7-132101 EC340F 8R5-108101 EC340E 8L6-067101
E338-146101 E338-132101
ETI40TH 8XO-157101 ETI40TG 8T9-119101 ETI40TF 8R3-106101 ETI40TE SNI-0S2101
E338-157101 E338-119101
EX440E 8L5-051101
SS440G 8U3-047101 SS440F 8N8-039101 SS440E 8L8-010101
SA437-047101
SRX440E 8M6-()()()101
PZ4MOH 8VO-019101
VMX540H 8X6-004101 VMX540G 8U9-004101
SR540H 8V9-064101 SRS40G 8U7-055101 SR540F 8R6-039101 SR540E 8L9-016101
SA535-064101 SA535-055101
EC540F 8N7-042101
ET250D
ETIOOD
ETI40D
ETI40ED
EX440D
SS440D
YAMAHA SNOWMOBILES - MOTONEIGES YAMAHA STARTING SERIAL NUMBERS - NUMEROS DE DEBUT DE SERlE
Bulletin S88-001A, Page 3 of 3
\ 1980· .......•......•. ·d; ··cY I'.';' .................. ,i.... '1979 .'.·
BJ5-038101 ET250C 8H4-025101 ET250B 8G5-0l0l01
8KO-009101 ETIOOC 8H9-000101
BJ6-025101 ETI40C 8H5-009101 ETI40B 8G8-000101
BJ9-040101 ETI40EC BJ4-020101
GS340C 8F7-076101 GS340B 8F7-072101
GP440B 8F8-049101
EX340B 8G7-oo5101
BJ7-036101 EX440C 8H6-024101 EX440B 8G5-012101
8K4-000101
SRX440D 8K2-oo8101 SRX440C BJO-002101 SRX440B 8G9-00010l
SSR440B 8HO-OOO101
SR540D 8LO-009101 EXCEL V 8H8-000101
EC540D 8K1-004101
BR250M
1988 SERVICE DATA
September 9, 1987
MODEL-Engir.e Number/Startin~ Frame Number
ENGINE-Displacement(cc)/Bore X Stroke (mm) Piston Clearance(mm) Piston Ring End Ga~ (To~/2nd) (mm)
CARBURETOR-Manufacturer/Type/I. D. Number Main Jet Alternate Main Jets Jet ~eedle (Clip Position) Idle Mixture Sere .. Turns Out Power Jet/Pilot(Slo .. )jet Float Height(mrn) Idle RPM Pilot(Slow)Air Jet/Power Air Jet/Main Air Jet
AUTO LUBE PUMP-Colour/Adjustment(mm)
Pump Plunger Stroke (Min/Ma;.:) (IiiIii) DRIVE-Primary Sheave Engagement RPM Shift RPM Sheave Center to Center(mm) Sheave Offset(mm) Primary Spring Colour/Length(rnm) Primary Spring Rate(kg-mm)/Preload(kg) Secondary Spring Colour/Length(mm) Secondary Spring Rate (kg-rnm/rad)/Preload Secondary Drive Gear Ratio Chain Free Play(mm)/Track Tension(mm-kg) Ski Centre to Centre (ruru) Ski Toe - in or Toe-out(mm)
CAPACITIES-Fuel tank Capacity(L)/Fuel Type Oil Tank Capacity(L)!Oil Type Chain Case Capacity(cc)/Oil Grade Coolant Capacity(L)/Type/Ratio
ELECTRICAL-Spark Plug/Gap(mm) lieadlight/Taillight/Meterlight Wattage Ignition System/Manufactu rer Ignition Timing Pulser Coil Resistance Charge Coil Resistance Lighting Coil Resistance Primary Ignition Coil Resistance Secondary I~nition Coil Resistance
S88-002
ER250M (83Y) 83Y/83Y-000lOl Fan-cooled,Piston-port, Single 246/70 X 64 0.045-0 . 050 0. 20-0 . 40/0 . 20-0 . 40
KEIHIN/BD32 - 28/80FOO ~105 ~102,~10O,~98 -----1-1/4 -----/~78 IS±2.0 APPROX. 1100 ~10 0/-----/-----
PINK/2S+ I-Cable Freeplay at idle
0. 20-0. 2S/1. 6S-1. 37
APPROX. 3100 APPROX.S700 APPROX. 266 APPROX.l1 NONE/67.S 2.40/1S ~WNE/IQ5
183/160 0
13/22 8-15/25--- 30-10 750 0-IS (Toe out)
IS/Unleaded Regular Gasoline 1. 75/YAMALUBE 2 200/SAE#75-80.API-GL3 -----
XGK CR8BS/C. 6--- O. 7 60-60/8-23/3.~ C D I /Y All , II A • •• I"\lh011
1. 6liim BTDe \\'hi te/Red- BI ack: 20 Q + 10~~ Broh'n-Inack:426Q + 10~~ Yellon-Black:O. 23Q..l.I O~~ 1. OQ ::: 15~~ 5. 9kQ ± 15~~
"-MAHA MOTOR CANADA LTD. L--.J---------- • M MOTEUR DU CANADA LTEE
BR250TSM
1988 SERVICE DATA
September 9, 1987
MODEL-Engine Number/Starting Frame Number
ENGINE-Displacement(cc)/Bore X Stroke (mm) Piston Clearance(ru@) Piston Ring End Gap (Top/2nd) (miil)
CARBeRETOR-Manufacturer/Type/I. D. Number ~:ai n Jet Alternate Main Jets Jet Needle (Clip Position) Idle Mixture Scren Turns Out P05er Jet/Pilot(Slon)jet Float Height(rum) Idle RPM Pilot(Slon)Air Jet/Poner Air Jet/Main Air Jet
AUTOLUBE PUMP-Colour/Adjustment(rum)
Pump Plunger Stroke (Min/Max) (mm) DRIVE-Primary Sheave Engagement RPM Shift RPM Sheave Center to Center(mm) Sheave Offset(mm) Primary Spring Colour/Length(mm) Primary Spring Rate(kg-rum)/Preload(kg) Secondary Spring Colour/Length(mm) Secondary Spring Rate (kg-mrn/rad)/Preload Secondary Drive Gear Ratio Chain Free Play(mm)/Track Tension (rum-kg) Ski Centre to Centre (mm) Ski Toe-in or Toe-out(mm)
CAP AC IT IES-Fuel tank Capacity(L)/Fuel Type
~} 1 Tank Capac i ty (L) /0 i 1 Type Chain Case Capacity(cc)/Oil Grade Coo 1 an t Capac it y (L) /TypejRa t i 0
ELECTRICAL-Spark Plug/Gap(ill~) Headlight/Tail1ight/Meterlight Wattage Ignition System/ Manufacturer Ignition Timing Pulser Coil Resistance Charge Coil Resistance Lighting Coil Resistance Primary Ignition Coil Resistance SecondarY I~nition Coil Resistance
S88-003
BR250TSM (84A) 84A/84A- OOOIOI Fan- cooled,Piston-port, Single 246/70 X 64 0.045--0.050 0.20--0.40/0 . 20--0.40
KEIHIN/ BD32-28/80JOO ~lO5 ~102,~10O,~98 --- --
1-1/4 -----/~78 15± 2 APPROX. 1100 ~100 /-----/-----
PINKI25± I-Cable Freeplay at idle
0.20--0. 25}1. 65--1. 87
APPROX. 2900 APPROX. 5700 APPTIOX. 266 APPROX.11 NONE/67 . 8 2.40/15 NONE/105 183/160· 12/23 8--15/25--30-10 750 0-15 (Toe out)
15/Unleaded Regular Gasoline 1. 75!YAMALUBE 2 200/SAE~75--80,API -GL3 -----
NGK BRSHS/O.6--0. 7 60-60/8- 23/3 . 4 C.D.I./YAMAHA 1. 6mm BTDe Whi te/ TIed-Black: 20Q ± 10% Brofin--Black:426Q ± 10~~ Ye 11 On-- Bl ack.: O. 23 Q ± 1 O~~ 1.0Q+15~~
5. 9kQ + 15~~
"-MAHA MOTOR CANADA LTD. ---------- • M MOTEUR DU CANADA LTEE
BR250Tl\1
1988 SERVICE DATA
September 9, 1987
MODEL-En~ine Number/Starting Frame Number
EXGINE-Displacement(cc)/Bore X Stroke (mm) Piston Clearance(mm) Piston RinA End Gap (Top/2nd) (rom)
CARBUP.ETCR-~anufacturer/Type / I . D . Nuiiiber Main Jet Alternate Main Jets Jet Needle (Clip Position) Idle Mixture Screw Turns Out Po~er Jet/Pilot(Sl on)jet Float Height(mm) Idle RPM Pilot(Slow)Air Jet / Power Air Jet/Main Air Jet
AUTOLUBE PUMP -Colaur/Adjust~ent(mm)
PUwp Plunger Stroke (Min / :,:ax) (rnm) DRIVE-Primary Sheave Engagement RPM Shift RPM Sheave Center to Center(mm) Sheave Offset(mm) Primary Spring Colour/Length(mrn) Primary Spring Rate (kg-mm)/Preload(kg) Secondary Spring Colour/Length(mm) Secondary Spring Rate (kg-mrn/rad)/Preload Secondary Drive Gear Ratio Chain Free Play(mm)/Track Tension(mm-kg) Ski Centre to Centre(mm) Ski Toe-in or Toe-out(mm)
CAPAC I TI ES-Fuel tank Capacity(L)/Fuel Type Oil Tank Capacity(L)/Oil Type Chain Case Capacity(cc)/Cil Grade Coolant Capacitv(L)/Tvpe/Ratio
ELECTR I CAL-Spark Plug/ Gap(mm) Headlight/ Taillight/Meterlight Wattage Ignition System/Manufacturer Ignition Timing Pulser Coil Resistance Charge Coil Resistance Lighting Coil Resistance Primary Ignition Coil Resistance Secondary Ig-nition Coil Resistance
S88-004
BR250n1 (8~E)
84E/ 84E- 000I0l Fan-cooled,Piston-port,Single 24 6/70 X 64 O. 045----- O. 050 0.20----0.40/0 . 20----0 .40
KEIHIN/BD32- 28!80JOO ~105 ~102,~100.~98 - - ---
1-114 -----/~7S l5± 2 APPROX. 1100 ~100/-----/-----
PINK/25 ± I-Cab Ie Freeplay at idle
0.20---- 0.25/1. 65----1. 87
APPRCX. 3200 APPROX. 5900 APPROX. 266 APPROX. 11 GOLD-PINK/69.5 2.50/20 NOXE/l05 183/160· 10/24 S ........ 15/40-----50-10 750 0----15 (Toe out)
IS / Unleaded Regular Gasoline 1. 75/YA~U.LUBE 2 200/SAE~75----S0, API - GL3 - - - --
NGK ERSIlS/O. 6----0. 7 60-55/S-23/3.4 C. D. 1. /YA~:AHA 1. 6ffim BTDC White/Red.----Black:20Q + 10% Brol'ln----Black:426Q ± 10~~ Yello .. -----Black:O. 23Q -!-1 0?{; 1. 0 Q -!- 15~~
5. 9kn -!-15~~
"AMAHA MOtOR CANADA LTD . 1-__________ • M MOTEUR DU CANADA LTEE
CF300M
1988 SERVICE DATA
September 9, 1987
MODEL-Engine Number/Starting Frame Number
ENGINE-Displacement(cc}/Bore X Stroke(mm} Piston Clearance(mm) Piston .Ring End Gap (Top/2nd) (mm)
CARBURETOR-Manufacturer/Type/I. D. Number Main Jet Alternate Main Jets Jet Needle (Clip Position) Idle Mixture Screw Turns Out Power Jet/Pilot(Slow}jet Float Height(mm} Idle RPM Pilot(Slow)Air Jet/Power Air Jet/Main Air Jet
AUTOLUBE pmlP-Colour/Adjustment(mm)
Pump Plunger Stroke (Min/Max) (mm) DRIVE-Primary Sheave Engagement RPM Shift RPM Sheave Center to Center(mm} Sheave Offset(mm} Primary Spring Colour/Length(mm} Primary Spring Rate (kg-mm}/Preload(kg) Secondary Srr. ing Colour/Length(mm} Secondary Sp r ing Rate (kg- mm/rad}/Preload Secondary Drive Gear Ratio Chain Free Play(mm)/Track Tension(mm-kg} Ski Centre to Centre (mm) Ski Toe-in or Toe-out(mm)
CAPACITIES-Fuel tank Capacity(L}/Fuel Type Oil Tank Capacity(L)/Oil Type Chain Case Capacity(cc}/Oil Grade Coolant Capacity(L)/Type/Ratio
ELECTR I CAL-Spark Plug/Gap(mm) Headlight/Taillight/Meterlight Wattage Ignition System/Manufacturer Ignition Timing Pulser Coil Resistance Charge Coil Resistance
Lighting Coil Resistance Primary Ignition Coil Resistance Secondary Ignition Coil Resistance Battery Type/Spec. Gravity/Charge Rate
~ S88-00S
CF300M (83U) 83U/83U-000101 Liquid-cooled,Piston-port,Single 292173 X 70 0.060"- 0. 065 0.20"-0. 40/0.20"-0.40
KEIHIN/BD38-32/83MOO ~108 ~110.#105,#102,#100 -- - --
1-1/8 -----/#95 15 ± 2. 0 APPROX. 1100 4> 1. 0/----- / ----- mm
ORENGE/25± I-Cable Freeplay at idle
0.20"-0 .25 /1.65"-1.87
APPROX. 3000 APPROX.5750 APPROX. 266 APPROX. 15 GOLD- BROWN/77.5 1. 25/20 NONE/105 183/160· 12/19 8-15/25"- 30-10 880 0-15 (Toe out)
20/Unleaded Regular Gasoline 2.0/YAMALUBE 2 200/SAE#75-80,API - GL3 1.9/Aluminum-compatible etylene ~lJco1/6:4(Distilled nter)
NGK BR8ES/0.7-0.8 60-60/8-23/3.4 C. D. 1. /MITSUBISHI 17" BTDC Whi te/Red"- Bl ack: 20 Q ± 10% Brown"- BI ack: 275 Q ± 10 ~~ Red"-Black:0.78±10% Yellow-Black:O. 32Q ± 10~~ 1.0Q±15% 5. 9kQ ± 15% YUASA:YB16AL- A2/1.28/1.6A
".MAHA MOTOR CANADA LTD . 1-_________ • M MOTEUR DU CANADA LTEE
ET340M
1988 SERVICE DATA
September 9, 1987
~~ODEL-
Engine Number/Starting Frame Xumber ENGIXE-Displacement(cc)/Bore X Stroke (mm) Piston Clearance (mm) Piston Ring End Gap (Top/2nd) (mm)
CARBURETOR-Uanufacturer/Type/I.D.Number Main Jet Alternate Main Jets Jet Needle (Clip Position) Idle Mixture Screw Turns Out POner Jet/Pilot(Slow)jet Float Height(mm) Idle RPM Pilot(Slow)Air Jet/Power Air Jet/Main
AUTO LUBE PUMP-Colour/Adjustment(mm)
Pump Plunger Stroke (Min/Max) (llim) DRIVE-Primary Sheave Engagement RPM Shift RPM Sheave Center to Center (llim) Sheave Offset(mm) Primary Spring Colour/Length(mm) Primary Spring Rate (kg-mm)/Preload(kg) Secondary Spring Colour,'length(mm)
Air Jet
Secondary Spring Rate (kg- mm/rad)/Preload Secondary Drive Gear Ratio Chain Free Play(mm)/Track Tension(mm-kg) Ski Centre to Centre (mm) Ski Toe-in or ~oe-out(mm)
CAPACITIES-Fuel tank Capacity(L)/Fuel Type Oil Tank Capacity(L)/Oil Type Chain C~se Capacity(cc)/Oil Grade Coolant Capacity(L)/Type/Ratio
ELECTRICAL-Spark Plug/ Gap(mlli) Headlight/Taillight/ Meterlight Wattage Ignition System/Manufacturer Ignition Timing Pulser Coil Resistance Charge Coil Resistance
Lighting Coil Resistance Primary Ignition Coil Resistance
(TOYO DENSO/HITACHI) Secondary Ignition Coil Resistance
(TOYO DENSO/HITACHI)
S88-006
ET340M (83T) 83T/83T-OOOl01 Fan- cooled, Piston-port, Twin 337/60 X 59.6 0.040 ....... 0.045 0.35 ....... 0. 55/0 . 35 ....... 0.55
MIKUNI/B38-32/8Y20l ~135 ~137.5,~132.5,~131.3,~130.~128.8 ---- -
7/8 -----/~100 15+ 1 APPROX.1700 ~O. 7/--- --/----- mm
Whi te/25 ± I-Cable Freeplay at idle
0.20 ....... 0.25 /1.65 ....... 1.87
APPROX. 3000 APPROX. 6600 APPROX. 266 APPROX.l1 RED/79.4 1. 40125 NONE/l05 183/160· 13/22 8 ....... 15/25 ....... 30-1 0 850 0 ....... 15 (Toe out)
25/Unleaded Regular Gasoline 2.4/YAMALUBE 2 400/SAE~75~80,API-GL3 - ----
NGK BR9ES/0.7 ....... 0. 8 60-60/8-23/3.4 C. D. I. /YA~~AHA 1. 6mm BTDC Whi telRed ....... Black: 20Q ± 10~'~
Brown ....... Black:275Q ± 10~~ Red ....... Black:O. 78Q ± 10 ~~
Yellow---Black :O. 32Q +- 10~~ 0. 12Q ±8%/0.15Q ± 20~~
4. OkQ ± 20%/3. 5kQ ± 20~~
"-MAHA MOTOR CANADA LTD. 1-_________ • M MQTEUR DU CANADA LTEE
EC340l\f
1988 SERVICE DATA
September 9, 1987
MODEL-Engine Number/Starting Frame Kumber
ENGINE-Displacement(cc)/Bore X Stroke(mm) Piston Clearance(mm) Piston Ring End Gap (Top/2nd) (mm)
CARBlJRETOR-~anufacturer/Type/I.D . Number Main Jet Alternate Main Jets Jet Needle (Cl ip Pos i tion) Idle Mixture Screw Turns Out POher Jet/Pilot(Slow)jet Float Height(mm) Idle RPM Pilot(Slow)Air Jet/Power Air Jet/Main Air Jet
AUTOLUBE PUMP-Colour/Adjustment(mrn)
Pump Plunger Stroke(Min/Max) (mm) DRIVE-Primary Sheave Engagement RPM Shi ft RPM Sheave Center to Center(mm) Sheave Offset(mm) Primary Spring Colour/Length(mm) Primary Spring Rate(kg- rum)/Preload(kg) Secondary Spring Colour/Length(mm) Secondary Spring Rate(kg-mm/rad)/Pr'~.1oad Secondary Drive Gear Ratio Chain Free Play(mm)/Track Tension(mm- kg) Ski Centre to Centre (mm) Ski Toe-in or Toe - out(mm)
CAPAC I TI ES-Fuel tank Capacity(L)/Fuel Type Oil Tank Capacity(L)/Oil Type Chain Case Capacity(cc)/Oil Grade Coo 1 an t Capac i ty (L) / Tvpe/Ra t i 0
ELECTRICAL-Spark Plug/ Gap(mm) Headlight/Taillight/Meterlight Wattage Ignition System/~anufacturer Ignition Timing Pulier Coil Resistance Charge Coil Resistance
Lighting Coil Resistance Priwary Ignition Coil Resistance
(TOYO DENSO/HITACHI) Secondary Ignition Coil Resistance
(TOYO DENSO/ HITACHI) Battery T)~e/Spec.Gravity/Charge Rate
S88-007
EC340M (84H) 84H/84H-O OO IOl Fan-cooled, Piston-port, Twin 337/60 X 59.6 0. 040-0.045 0.35-0.55/0.35-0 . 55
MIKUNI/B38-32/8Y201 ~135 ~137.5.~132. 5,~131. 3.~130 . ~128.8 -----
7/8 -----/~1 00 15± 1 APPROX.1700 4>0.7/--- --/----- mm
flhite/25±I-Cable Freeplay at idle
O. 20-0. 25/1. 65-1. 87
APPROX. 3000 APPROX. 6600 APPROX. 266 APPROX.l1 RED/79.4 1. 40/25 ~WNE/ I05 183/ 160· 13/22 8-15125- 30-10 850 0-15 (Toe out)
25 /U nleaded Regular Gasoline 2.4/YAMALUBE 2 400/SAE~75-80,API-GL3 -----
NGK BR9ES/0. 7-0.8 60-60/8-23/3.4 C. D. I. /Y A~~AHA 1. 6mm BTDC Whi te/Red-Bl ack: 20 Q ± 10% Brown ....... Black:275Q ± 10~~ Red-Black :O. 78Q ± 10 ~~ Yellov,'-Black: O, 32Q±1 0~~ 0.12Q ±8~~/0.15Q ±20~~
4. OkQ ± 20~~/3. 5k Q ± 20 ~~
YUASA:YB14L-A2/1.28/1 , 4A
'VAMAHA MOTOR CANADA LTD,
L-~-------------------- IMWl MOTEURDUCANADALTEE ------------------~
r---
ET340TM ~, 1988 SERVICE DATA S88-008
September 9, 1987
MODEL- ET340TM (84F)
~ En~ine Number~Startin~ Frame Number 84F/84F- OOOIOI
ENGINE- Fan-cooled.Piston-port.Twin Displacement(cc)/Bore X Stroke (mm) 337/60 X 59.6 Piston Clearance(mm) 0. 040--0 . 045 piston Ring End Gap (Top/2nd) (mm) 0. 35--0.55 /0 . 35--0.55
I~ CARBURETOR-Manufacturer/Type/I.D. Number MIKUNI/B38-32/80E01
~ ~Iain Jet #132 .5
~ Alternate Main Jets #135,#128. 8,#125,#122.5.#121 . 3 II Jet Needle (Clip Position) - ----'--- Idle Mixture Screw Turns Out 1.0 ~ Power Jet/Pilot(Slow)jet - - ---/#95 ~ Float Height(mm) 15± 1
~ Idle RPM APPROX. 1600 Pilot(Slow)Air Jet/Power Air Jet/Main Air Jet ~O . 7/-----/----- mm
~ AUTOLUBE PUMP-
~ Colour/Adjustme nt(mm) White/25± I-Cable Freeplay at idle
Pump Plunger StrokeCMin/Max) (mm) 0. 20-- 0.25/1.65--1.87 DRIVE-Primary Sheave Engagement RPM APPROX. 3200 Shift RPM APPROX.6500 Sheave Center to Center(mm) APPROX. 266 Sheave Offset(mm) APPROX.l1 Primary Spring Colour/Length(mm) RED/79.4 .- Primary Spring Rate (kg-mm )/Preload(kg) 1. 40/25
~ Secondary Spring Colour/Length(mm) rOLD/127
~ Secondary Spring Rate (kg-mm/rad)/Preload 187/192 0
Secondary Drive Gear Ratio 12/23 Chain Free Play(mm)/Track Tension(mm-kg) 8--15/40--50-1 0 Ski Centre to Centre(mm) 800
~ Ski Toe-in or Toe-out(mm) 0--15 (Toe out) CAPAC ITI ES-
~ Fuel tank Capacity(L)/Fuel Type 25/Unleaded Regular Gasoline [;:J Oil Tank Capacity(L)/Oil Type 2.4/YAMALUBE 2
Chain C~!e Cap~city(cc)/Oil Grade 40 0/SAE#75--80,API-GL3
~ Coolant Capacity(L)/Tvpe/Ratio -----
ELECTRICAL-Spark Plug/Gap(mm) NGK BR9ES/0. 7--0 . 8 Headlight/Tail 1 ight/Meterl ight Wattage 60-60/8-23/3.4
f; Ignition System/Manufacturer C. D. 1. /YAMAHA Ignition Timing 1. 6mm BTDC Pulser Coil Resistance Whi te/Red-- Bl ack: 20 Q ± 10%
~ Charge Coil Resistance Brown--- Bl ack: 275 Q ± 10%
~ Red--Black:O. 78Q ± 10% Lighting Coil Resistance Yellow--Black:O. 32Q+IO~~ Primary Ignition Coil Resistance 0.12Q ±8%/0.15Q±20%
(TOYO DENSO/HITACHI) Secondary Ignition Coil Resistance 4. OkQ ± 20%/3. 5kQ ± 20%
(TOYO DENSO/HITACHI)
YAMAHA MOTOR CANADA LTD. MOTEUR DU CANADA LTEE ....
'-----'
ET340TRM
1988 SERVICE DATA
September 9, 1987
~WDEL-Engine Number/Starting Frame Number
ENGINE-Displacement(cc)/Bore X Stroke(mm) Piston Clearance(mm) Piston Ring End Gap (Top/2nd) (mm)
CARBURETOR-Manufacturer/Type/I . D.Nu@ber Main Jet Alternate Main Jets Jet r:e ed I e (Clip Position) Idle Mixture Screw Turns Out Power Jet/Pilot(Slow)jet Float Height(mm) 1 die RP~l
Pilot(Slow)Air Jet/Power Air Jet/Main Air Jet AUTO LUBE PUMP-Colour/Adjustment(mm)
Pump Plunger Stroke (Min/Max) (mm) DRIVE-Primary Sheave Engagement RPM Shift RPM Sheave Center to Center(mm) Sheave Offset(mm) Primary Spring Colour/Length(mm) Primary Spring Rate (kg- mm)/Preload(kg) Secondary Spring Colour/Length(mm) Secondary Spring Rate (kg-mm/rad)/Preload Secondary Drive Gear Ratio Chain Free Play(mm)/Track Tension(rnm-kg) Ski Centre to Centre(mm) Ski Toe-in or Toe - out(mrn)
CAPACITIES-Fuel tank Capacity(L)/Fuel Type Oil Tank Capacity(L)/Oil Type Chain Case Capacity(cc)/Oil Grade Coolant Capacity(L)/Type/Ratio
ELECTRICAL-Spark Plug/Gap(mm) Head light/ Taillight/Meterlight Wattage Ignition System/Manufacturer Ignition Timing Pulser Coil Resistance Charge Coil Resistance
Lighting Coil Resistance Primary Ignition Coil Resistance
(rOYO DENSO/HITACHI) Secondary Ignition Coil Resistance
(TOYO DENSO/HITACHI)
S88-009
ET340TRM (84G) 84G/84G-OOOIOl Fan-cooled, Piston- port, Twin 337/60 X 59.6 0.040--0.045 0. 35--0.55/0.35--0.55
MIKUNI/B38-32/S0EOI ;'132.5 ~135,;'128.8,;'125,~121. 3,~117.5 -- - - -
1.0 -----/~95 15± 1 APPROX. 1600 <P 0.7 / - ----/-----mm
White/25± I-Cable Freeplay at idle
0. 20--0.25/1.65--1.87
APPROX. 3100 APPROX. 6500 APPROX. 266 APPROX.l1 GOLD/73.4 2. 10/25 GOLD/I27 .. 187/192· 14/33 8--15/40--50-10 SOO 0--15 (Toe out)
25/Unleaded Regular Gasoline 2.4/YAMALUBE 2 300/SAE#75~SO,API -GL3 -----
NGK BR9ES/0. 7---0. 8 60 -60/S-23/3.4 C. D. I. /YA~1AHA 1. 6mm BTDe ?ih i te/Red---- BI ack: 20 Q -+- 1 O~o Brown--Black:275Q ± 10~o Red---Black :O. 7SQ -+- 10~~
Yellon--- Black:O. 32Q±10~o 0. 12Q ±8~~/0.15Q ± 20~o
4. OkQ ± 20~~/3 . 5kQ ± 20~o
VAMAHA MOTOR CANADA LTD. ---------- • M MOTEUR DU CANADA LTEE
PZ480lVl
1988 SERVICE DATA
September 9, 1987
MODEL-Enf!:ine Number/Startinf!: Frame Number
ENGINE-
Displacement(cc)/Bore X Stroke(mm) Piston Clearance(mm) Piston Ring End Gap (Top/2nd) (mm)
CARBURETOR-Manufacturer/Type/I. D. Number Main Jet Alternate Main Jets
Jet Needle (Clip Position) Idle Mixture Screw Turns Out Power Jet/Pilot(Slow)jet Float Height(mm) Idle RPM Pilot(Slow)Air Jet/Power Air Jet/Main Air Jet
AUTO LUBE PUMP-Colour/Adjustment(mm)
Pump PI unger Stroke (Mi n/Max) (mm) DRIVE-Primary Sheave Engagement RPM Shi ft RPM Sheave Center to Center(mm) Sheave Offset(mm) Primary Spring Colour/Length(mm) Primary Spring Rate (kg-mm)/Preload(kg) Secondary Spring Colour/Length(mm) Secondary Spring Rate (kg-mm/rad}/Preload Secondary Drive Gear Ratio Chain Free Play (mm)/Track Tension (mm-kg) Ski Cent re to Centre (mm) Ski Toe - in or Toe- out(mm}
CAPACITIES-~.1 tank Capac i ty (L) /Fue I Type
Oil Tank Capacity(L)/Oil Type Chain Case Capacity(cc)/Oil Grade Coolant Capacitv(L}/Tvpe/Ratio
ELECTRICAL-Spark Plug/Gap(mm) Headlight/Taillight/Meterlight Wattage Ignition System/Manufacturer Ignition Timing Pulser Coil Resistance Charge Coil Resistance Lighting Coil Resistance Primary Ignition Coil Resistance
(TOYO DENSO/HITACHI) Secondary Ignition Coil Resistance
(TOYO DENSO/HITACHI)
S88-010
PZ480M (84J) 84J184J-OOOIOI Axial-fan-cooled, Torque-induction. Twin 485/72 X 59.6 0.045- 0. 050 O. 35-0. 55/0. 35-0. 55
MIKUNI/B38- 32/80LOl:RH/8VOO2:LH #143 . 8 #152.5.#150,#147.5,#138.8,#136 . 3 #131. 3. #126 . 3, #121. 3 - ----
1- 1/2 -----/#95 12± 1 .APPROX.1600
<i> 0.5/-- ---/ <i> 1. 5 mm
BI ack/22 ± I- Cab Ie Freeplay at idle
0.15-0.20/1.62-1.80
APPROX. 3200 APPROX. 6850 APPROX.268.5 APPROX.l1 Blue-Green/85. 1 1. 06/25 Yellow-Light Blue/85 641/60· (B- l) 17/29 8---15/25---- 30- 1 0 856 0-15 (Toe out)
31.8/Unleaded Regular Gasoline 2.5/YAMALUBE 2 250/SAE#75-80,API-GL3 -----
NGK BR9ES/0. 7----0. 8 60 - 55/8-23/3.4 C. D. I. /MITSUBISHI 1. 5mm BTDC White/Red----Black: 140 +- 10% Brown- BI ack: 556 0 + 10% Yellow----Black:0.190±10~~
0.120 ±8%/0. 150 ± 20%
4. OkO ± 20V3. 5kO ± 20%
VAMAHA MOTOR CANADA LTD. - _________ • M MOTEUR DU CANADA LTEE
.---
PZ480EM ~A, 'I
[~ . " ' ~
1988 SERVICE DATA S88-011
September 9, 1987
~lODEL- PZ480EM (83V) End ne Number/Starting Frame Number 83V/83V- OOOI01
~ ENGINE- Axial-fan-cooled. Torque-
induction. Twin Displacement(cc)/Bore X Stroke (mm) 485/72 X 59.6 Piston Clearance(mm) 0.045---0 . 050 Piston Ring End Gap (Top/2nd) (mm) 0.35---0.55/0.35---0.55
I: CARBURETOR-Manufacturer/Type/I . D. Number MIKUNI/B38-32/80LOI:RH/8V002:LH
~ Main Jet #143.8 Alternate Main Jets #152.5.#150.#147.5.#138.8.#136.3
~ #131. 3. #126 . 3. #121. 3 ----- Jet Needle (Clip Position) - ----• Idle Mixture Screw Tutns Out 1-112 ~ Power Jet/Pilot(Slow)jet -----/#95
Float Height(mm) 12+ 1 Idle RPM APPROX. 1600 Pilot(Slow)Air Jet/Power Air Jet/Main Air Jet 4> 0. 5/-- ---/4> 1. 5 mm
AUTOLUBE PUMP-Colour/Adjustment(mm) Black/22± I-Cable Freeplay at
idle
rrf Pump Plun.e;er Stroke (Min/Max) (mm) 0. 15 ...... 0.20/1. 62---1. 80 DRIVE-
~ Primary Sheave Engagement RPM APPROX.3200 Shift RPM APPROX.6850 Sheave Center to Center(mm) APPROX.268.5 Sheave Offset(mm) APPROX.l1 Primary Spring Colour/Length(mm) Blue-Green/85 . 1
~ Primary Spring Rate (kg-mm)/Preload(kg) 1. 06/25 Secondary Spring Colour/Length(mm) Yellow-Light Blue/85 Secondary Spring Rate (kg-mm/rad)/Preload 641160· (B-1)
....... Secondary Drive Gear Ratio 17/29
• Chain Free Play(~m)/Track Tension(mm-kg) 8---15/25--- 30-10 Ski Centre to Centre(mm) 856 Ski Toe-in or Toe - out(mm) 0---15 (Toe out)
CAPACITIES-Fuel tank Capacity(L)/Fuel Type 31.8/Unleaded Regular Gasoline Oil Tank Capacity(L)/Oil Type 2. 5/YAMALUBE 2
~ Chain Case Capacity(cc)/Oil Grade 250/SAE#75---80 .API -GL3 Coolant Capacity(L)/TYJle/Ratio -----
ELECTRICAL-Spark Plug/Gap(mm) NGK BR9ES/0.7--- 0. 8
~ Headlight/Taillight/Mete rlight Wattage 60-55/8-23/3.4 Ignition System/Manufacturer C. D. 1. 1M ITSUB I SH I Ignition Timing 1. 5mm BTDC
~ Pulser Coil Resistance Whi te/Red---BI ack: 14Q ± 10%
~ Charge Coil Resistance Brown---Black:556Q ± 10% '---- Lighting Coil Resistance Yellow---Black:O. 19Q + 10%
Primary Ignition Coil Resistance O. 12Q ± 8%/0 . 15Q ± 20% (TOYO DENSO/HITACHI)
Secondary Ignition Coil Resistance 4. OkQ ± 20%/3 . 5kQ ± 20% (TOYO DENSO/HITACHI)
Battery Type / Spec. Gravity/Charge Rate YUASA:YBI4L-A2/1.28/1.4A
YAMAHA MOTOR CANADA LTD . MOTEUR DU CANADA LTEE
"'----
.---
VMX540M ~, 1988 SERVICE DATA - UPDATE S88-012A .,.
roo February 24, 1988
~IODEL- VIdX540~j (83X) En~ine Number/Startin~ Frame Number 83X/83X-OOOI0l
~ ENGINE- Liquid-cooled.Piston- valve . T~in Displacement(cc)/Bore X Stroke(mm) 535/73 X 64 Piston Clearance(mm) 0.065---0.075 Piston Rin~ End Gap (Top/2nd) (mm) 0.35---0.55/0. 35---0. 55
CARBU RETOR-
~ Ma nufacturer/Type/I.D.Number MIKUMlfVI'.B8/LH:83XOOL. RH :83XOOR
Main Jet 1:290
~ Alternate Main Jets #330.1:310. ~270.~250.~240.~23 0
;:220.;:210.#200.;:180 7i Jet Needle (Clip Position) 6DH27(3)
'--- Idle Mixture Screw Turns Out 1
~ Power Jet/Pilot(Slo~)jet LH #150. RH #130/ #40
Float Height(mm) 18. 1 ± 1 (without gasket)
~ Idle RP~1 APPROX. 1500 Pilot(Slo~)Air Jet/Power Air Jet/Main Air Jet -/LH Sl1.2, RH r/J 1.3/, 2.5
~ AUTO LUBE PUMP-
~ Colour/Adjustment(mm) Red/Align with cable adjuster at
full throttle Pump Plu nger Stroke (Min/Max) (mm) 0.50---0.55/2.15---2.27
DR IVE-Primary Sheave Engagement RPM APPROX.4000
~ Shift RPM APPROX.8200 Sheave Center to Center(mm) APPROX. 305 Sheave Offset(mm) APPROX. 11 Primary Spring Colour/Length(mm) White-Yellow/75.7 Primary Spring Rate(kg-mm)/Preload(kg) 2.20---2.30/30.8---32.7
~ Secondary Spring Colour/Length(mm) PINK/85 Secondary Spring Rate (kg-mm/rad)/Preload 794/40· (C-2) Secondary Drive Gear Ratio 18/33 Chain Free Play(mm)/Track Tension(mm- kg) 8---15125---30-10 Ski Centre to Centre(mm) 880 Ski Toe-in or Toe-out(mm) 0---15 (Toe out)
CAPACITlES-Fuel tank Capacity(L)/Fuel Type 24/Unleaded Premium Gas oline Oil Tank Capacity(L)/Oil Type 2.5/YAMALUBE 2 Ch ai n Case Capacity(cc)/Oil Grade 250/SAE~75---80. API-GL3
~ Coolant Capacity (L)/Type/Ratio 3.1/Aluminum-compatible etylene
glycol/6:4(Distilled ..-ater) ELECTRICAL-Spark Plug/Gap(mm) NGK BR9EV/0.7---0.8
I~ Headlight/Taillight/Meterlight Wattage 60-55/8-23/3.4 Ignition System/Manufacturer C. D. I. /H IT ACH I Ignition Timing 1. 6mm BTDC
~ Pulser Coil Resistance fihi te/Green--- Black: 100 Q ± 1 O~~ ~ Lighting Coil Resistance Yellow- Black:0.247 Q + 10% II Charge Coil Resistance (H i gh) Red - White/Red :50.5 Q ± 10% '---
(Low) Brown - Red:245 Q + 10% Pri~ary Ignition Coil Resistance 0.12Q±8%/0.15Q±20~;
(TOYO DENSO/HITACHI) Secondary Ignition Coil Resistance 4. OkQ ± 20%/3 . 5kQ ± 20%
(TOYO DENSO/HITACHI) YAMAHA MOTOR CANADA LTD.
MQTEUR DU CANADA LTEE ..oiiI
""'----
SR540M
1988 SERVICE DATA
September 9, 1987
MODEL-En?:ine Number/Startin~ Frame Number
ENGINE-
Displacement(cc)/Bore X Stroke (mm) Piston Clearance(mm) 'Piston Ring End Gap (Top/2nd) (mm) Piston Groove Clearance (Top/2nd) (mm)
CA RBURETOR-Manufacturer/Type/I . D. Number Main Jet Alternate Main Jets
Jet Needle (Clip Position) Idle Mixture Screw Turns Out Power Jet/Pilot(Slow)jet Float Height(mm) Idle RPM Pilot(Slow)Air Jet/Power Air Jet/Main Air Jet
AUTO LUBE pmlP-Colour/Adjustment(mm)
Pump Plunger Stroke (Min/Max) (mm) DRIVE-Primary Sheave Engagement RPM Shift RPM Sheave Center to Center(mm) Sheave Offset(mm) Primary Spring Colour/Length(mm) Primary Spring Rate (kg- mm) / Preload(kg) Secondary Spring Colour/Length(mm) Secondary Spring Rate (kg- mm/ rad)/Preload Secondary Drive Ge~r Ratio Chain Free Play (mm)/Track Tension (mm-kg) Ski Centre to Centre(mm) Ski Toe- in or Toe-out(mm)
CAPAClTIES-Fuel tank Capacity(L)/Fuel Type Oil Tank Capacity(L)/Oil Type Chain Case Capacity(cc)/Oil Grade Coolant Capacitv(L)/Tvpe/Ratio
ELECTRICAL-Spark PIug/Gap(mm) Headlight/TaiI light/Meterlight Wattage Ignition System/Manufac turer Ignition Timing Pulser Coil Resistance Charge Coil Resistance Lighting Coil Resistance Pri~ary Ignition Coil Resistance
(TOYO DENSO/HITACHI) Secondary Ignition Coil Resistance
(TOYO DENSO/ HITACHI)
SR540M (84L) 84L184L-OOOIOI Axial-tan-cooled. Torque-induction. Twin 535/73 X 64 0.055 ...... 0.060 0.20 ...... 0. 40/0.20 ...... 0.40 0.02 ...... 0. 06/0 . 02 ...... 0.06
KEIHIN/BD44- 38/8YOOO ~150 #155.#145.#140.#135.#130.~125 #120 - ----
2. 0 #150/#92 15+ 2 APPROX.1500 #100/~170 /#180
Yellow/25± I-Cable Freeplay at i dl e
0. 20 ...... 0.25/1 . 65 ...... 1.87
APPROX. 3400 APPROX. 7200 APPROX. 268.5 APPROX.ll Gold-White /7 4.8 2.08/27 . 6 Pink/85 794/30· (B- 1) 17/31 8 ...... 15125- 30-10 880 0-15 (Toe out)
26. 6/Unleaded Premium Gasoline 2.5/YAMALUBE 2 250/SAE#75-80.API - GL3 -----
NGK BR9EV/0 .7-0.8 60- 55/8-23/3. 4 C. D. 1. /M lTSUBI SH I 1. 5mm BTDC Whi te/Red ...... B 1 ack: 14 Q ± 10% Brown-BI ack: 556 Q ± 10% Yellow-Black:O. 190 ± 10% O. 12Q ± 8%/0.150 ± 20%
4. OkQ ± 20~;/3. 5kO ± 20%
"AMAHA MOTOR CANADA LTD. 1-__________ • M MOTEUR DU CANADA LTEE
~ S88-013
XL540M
1988 SERVICE DATA
September 9, 1987
MODEL-Enl?:ine Number/Startinl?: Frame Number
ENGlNE-
Displacement(cc) / Bore X Stroke(mm) Piston Clearance(mm) Piston Rin~ End Gap (Top/2nd) (mm)
CARB UR ETOR-Manufacturer/Type/I.D.Number Main Jet Alternate Main Jets
Jet Needle (Clip Position) Idle Mixture Screw Turns Out Power Jet/Pilot(Slow)jet Float Height(mm) Idle RPM Pil ot(Slow)Air Jet/Power Air Jet/Main Air Jet
AUTO LUBE PUMP-Colour/Adjustment(mm)
Pump Plun~er Stroke (Min/Max) (mm) DRIVE-Primary Sheave Engagement RPM Sh i ft RPM Sheave Center to Center(mm) Sheave Offset(mm) Primary Spring Colour/Length(mm) Primary Spring Rate (kg-mm)/Preload(kg) Secondary Spring Colour/Length(mm) Secondary Spring Rate (kg-mm/rad)/Preload Secondary Drive Gear Ratio Chain Free Play(mm)/Track Tension(mm- kg) Ski Centre to C~ntre(mm) Ski Toe- in or Toe-out(mm)
CAPACITlES-Fuel tank Capacity(L)/Fuel Type Oil Tank Capacity(L)/Oil Type Chain Cds e Capacity(cc)/Oil Grade Coolant Capacity(L)/Type/Ratio
ELECTRICAL-Spark Plug/Gap(mm) Headlight/Taillight/Meterlight Wattage Ignition System/Manufacturer Ignition Timing Pulser Coil Resistance Charge Coil Resistance Lighting Coil Resistance Primary Ignition Coil Resistance
(TOYO DENSO/HITACHI) Secondary Ignition Coil Resistance
(TOYO DENSO/HITACHI) Battery Type/Spec. Gravity/Charge Rate
XL540M (83V1) 83W/83'H-000101 Axial-fan-cooled. Torque-induction. Twin 535/73 X 64 0.055 ...... 0.060 0.20 ...... 0.40/0.20 ...... 0.40
MlKUNI/B38-32 /8Y701 #132 .5 #145.#142.5.#137.5.#130.#127.5 #125.#122.5.#120.#117.5.#115 -----
1-1/2 -----1#60 12± 1 APPROX.1200 <b O. 8/-----/---- - mm
Yellow/27± I-Cable Freeplay at idle
0.20 ...... 0.25/1.65 ...... 1.87
APPROX. 3400 APPROX. 6900 APPROX.268.5 APPROX.ll White-Purple/77.2 1. 59125 Pink/85 794/50' (A-2) 17/29 8 ...... 15125 ...... 30-10 875 0 ...... 15 (Toe out)
26 . 6/Unleaded Regular Gasoline 2.5/YAMALUBE 2 250/SAE#75 ...... 80.APl-GL3 -----
NGK BR9ES/0. 7 ...... 0. 8 60-55/8-23/3.4 C. D. I. /MITSUBISHI 1. 5mm BTDC Whi te/Red ...... Black: 14Q ± 10% Brown ...... B 1 a.ck: 556 Q ± 10% Yellow ...... Black:0 .19Q ± 1 0~~
0.12Q ±8%/0. 15Q ± 20%
4. OH2 ± 20%/3. 5kQ ± 20%
YUASA:YB14L-A2/1. 28/1. 6A
"AMAHA MOTOR CANADA LTD. L_~---------- • M MOTEUR DU CANADA LTEE
S88-014
*
EX570M
1988 SERVICE DATA - UPDATE
October 7, 1987
"ODEL-Engine Number/Starting Frame Number
ENGINE-Displacement(cc)/Bore X Stroke(mm) Piston Clearance(mm) Piston Rin~ End Gap (Top/2nd) (mm)
CARBURETOR-lI anufacturer/Type/I.D. Number ~ain Jet Alternate Main Jets Jet Needle (Clip Position) Idle Mixture Screw Turns Out Po~er Jet/Pilot(Slow)jet Float Height(mm) Idle RPM Pilot(Sloft)Air Jet/Power Air Jet/Main Air Jet
AUTO LUBE pmlP-Colour/Adjustment(mm)
Pump PI unl!:er Stroke ().Ii n/~Iax) (mm) DRIVE-Primary Sheave Engagement RPM Sh ift RPM Sheave Center to Center(m~) Sheave Offset(mm) Primary Spring Colour/Length(mm) Priaary Spring Rate(kg-mm)/Preload(kg) Secondary Spring Colour/Length(mm) Sec ondary Spring Rate (kg-mm /rad) /Preload Secondary Drive Gear Ratio Chain Free Play(mm)/Track Tension(mm-kg) Ski Centre to Centre(mm) Ski Toe-in or Toe-out(mm)
CAPAClTIES-Fuel tank Capacity(L)/Fuel Type Oil Tank Capacity(L)/Oil Type Chain Case Capacity(cc)/Oil Grade Coo I ant Capaci ty (L) /Type/Rati 0
ELECTRICAL-Spark Plug/Gap(mm) Headlight/Taillight/Meterlight Wattage Ignition System/Manufacturer Ignition Timing Pulser Coil Resistance Charge Coil Resistance Lighting Coil Resistance Primary Ignition Coil Resistance
(TOYO DENSOIHITACHI) Secondary Ignition Coil Resistance
(TOVO DEN S OLHI T ACR I) ,
EX570M (8410 84}.(/84 11-000 1 01 Liquid-cooled. Piston-valve. Twin 569/73 X 68 0.070---0.075 0.20---0.40/0.20---0.40
Mlk"UMI(VM38jLH:84MOlL, RH:84MOI R
~32 0 ~34 0.~290. ~270 . ~25 0. ~23 0 6DH7(31 5/8 L.H. #160 R.H. #200L#42.5 18.1 ± 1 (without gasket) APPROX.150 0 -----/L. H. <P 1. 7. R. H. <P 1. 3/ <P 2. 5
Align mark with adjuster at full throttle
0.1 5---0.20/1. 62---1. 80
APPROX.3700 APPROX. 7250 APPROX.2 68.5 APPROX. 11 Gold-green/75.8 1. 75125 WHITE/93.5 . 794/50· (A-2) 17/31 8---15/25--- 30-1 0 920 0---15 (Toe out)
30.5junleaded premIUm gasoline 3.0/YAMALUBE 2 250/SAE#75---80.AP}-GL3 4.2/Aluminum-compatible etylene glYcol/6:4(Distilled ftater)
NGK BR9ES/0.7--0.8 60-55/8-23/3.4 C. D. I. /M ITSUB I SH I 1. 5mm BTDC White/Red---Black: 140 +1 0% Brown---Black:5560 ± 10% Yellow--Black:O. 190 + 10% 0.120 ±8%/0. 150 ± 20%
4. OkO ± 20%/3. 5kn ± 20:~
VAMAHA MOTOR CANADA LTD. L.._~---------- • M MOTEUR DU CANADA LTEE
S88-01SA
.---
EX570EM ~, I~- ' ' .. -
1988 SERVICE DATA - UPDATE S88-016A
October 7, 1987
IWDEL- EX570BI (84N) Engi ne Number/Startin~ Frame Number 84N/84N-00OIOI
~ ENGINE - L i quid-cooled.Piston-valve.T~in Displacement(cc)/Bore X Stroke(mm) 569/73 X 68 Piston Clearance(mm) 0. 070"- 0.075 Piston Ring End Gap (Top/2nd) (mm ) 0.20"- 0.40/0.20"-0.40
I: CARBURETOR-Manufacturer/Type/I.D. Number MIKUMI(VM38/LH:84MOlL. RH:84MOIR
}.lain Jet ~320
~ Alternate Main Jets ~340.~290.~270.~250.~230
~ Jet Needle (Clip Position) 6DH7 (3) ""- Idle Mixture Screw Turns Out 5/8 • Power Jet/Pilot(Slow)jet L.H.~160. R.H.:200/#42.5
~ Float Height(mm) 18.1 ± 1 (without gasket)
~ . Idle RPM APPROX. 1500 Pilot(Slow)Air Jet/Power Air Jet/Main Air Jet ----- /L. H. 4> 1. 7. R. H. 4> 1. 3/4:> 2. 5
AUTOLUBE PUMP-Colour/Adjust~ent(lIIm) Align mark with adjuster at full throttle
~ Pump Plun~er Stroke (MinjMax) (IIIm1 0.15 ...... 0.20/1. 62 ...... 1. 80
DRIVE-Primary Sheave Engagemen t RPM APPROX. 3700 Shift RPM APPROX. 7250 Sheave Center to Center(mm) APPROX.268.5 Sheave Offset(mm) APPROX.ll Prim~ry Spring Colour/Length(mm) Gold-green/75.8
~ Primary Spring Rate (kg-mm)/Preload(kg) 1. 75/25 Seco ndary Spri ng Colour/Length(mm) WHITE/93.5 ... r-secondary Spring Rate (kg-mm/rad)/Preload 794/50' (A-2) Secondary Drive Gear Ratio 17/31 Chain Free Play(mm)/Track Tension (mm-kg) 8--15/25"- 30-10 Ski Centre to Centre(mm) 920 Ski Toe-in or Toe-out(mm) 0--15 (Toe out)
CAPAC IT I ES-Fuel tank Capacity(L)/Fuel Type 3O.5junleaded premium gasoline Oil Tank Capacity(L)/Oil Type 3.0/VAUALUBE 2 Chain Case Capacity(cc)/Oil Grade 250/SAE#75"-80.API-GL3
~ Coolant Capacity (L)/Type/Ratio 4.2/Aluminum-colllpatible etylene
glvcol/6:4 (Disti lIed "iter) ELECTRICAL-Spark Plug/Gap(mm) NGK BR9ES/O. 7 ...... 0.8 Headl ight/Tai 11 ight/Meterl ight Wattage 60-55 /8-23/3 .4
I~ Ignition System/Manufacturer C. D. J. /M lTSUB I SH I Ignition Timing 1.5mm BTDC ...... Pulser Coil Resist an ce ~hite/Red"-Black: 14Q ± 10% .)
~ Charge Coil Resistance BroYi'n"-Black:556Q ± 10~~ Lighting Coil Resistance Yellow ...... Black:0.19Q+10% Primary Ignition Coil Resistance 0.12Q ±8%/0. 15Q ± 2 0~~
(TOYO DENSO/HITACHI) Secondary Ignition Coil Resistance 4. OkQ ± 2CV3. 5kQ ± 20~.
(TOYO DENSO/HITACHI) Batten Type/Spec. Gravi ty/Chaq;e Rate YUASA VD16AL-A2/1. 28 /1.6A
YAMAHA MOTOR CANADA LTD. MOTEUR DU CANADA LTEE
All Snowmobile Dealers
VK540M SERVICE DATA - UPDATE
December 23, 1987
MODEL-En~ine Number/Startin~ Frame Number
ENGINE-
Displacement(cc)/Bore X Stroke(mm) Piston Clearance(mm) Piston Ring End Gap (Top/2nd) (mm)
CARBURETOR-Manufacturer/Type/I.D.Number Main Jet
S88-017A
VK540M (84R) 84R/84R-OOOIOI Axial -fan-cooled, Torque-induct ion. Twin 535/73 X 64 0.055-----0.060 O. 20~0.40/0. 2 0~0.40
MIKUNI/B38-34/84ROO ~141. 3
Alternate Main Jets ~142. 5. ~14 0. t,137. 5, ~135. O. ;;132. 5 Jet Needle (Cl ip Position) -----
Idle Mixtu re Screw Turns Out 1-1/4 Power Jet/Pilot(Slow)jet - -:----/1:90 Float Height(mm) 12.7 ± 1 Idle RPM APPROX. 1200 Pil ot(Slow}Air Jet/Power Air Jet/Main Air Jet <P O. 8/----- /----- mm .
AUTOLUBE PUMP-Colo ur/Adjustmen t(mm) Black/25± I-Cable Freeplay at
idle Pump Plunger Stroke (Min/Max) (mm) 0.20-----0. 25/1. 65~ 1. 87
DRIVE-Primary Sheave Engagement RPM APPROX. 250 0 Shi ft RPM APPROX.6700 Sheave Center to Center(mm) APPROX. 26.8. 5 Sheave Offset(mm) APPROX.l1 Primary Spring Colour/Length(mm) WHITE/71. 5 Primary Spring Rate (kg-mm)/Preload(kg) 1. 5/15 Secondary Spring Colour/Length(mm) WHITE/93.5 Secondary Spring Rate (kg-mm/rad)/Preload 721/50 0 (2) Secon da ry Drive Gear Ratio 17/39 Chain Free Play(mm)/Track Tension (mrn-kg) 8-----15/35-----45-10 Ski Centre to Centre(mm) 810 Ski Toe-in or Toe-out(rnm} 0~15 (Toe out)
CAPACITIES-Fuel tank Capacity(L)/FueI Type 31/Unleaded Regular Gasoline Oil Tank Capacity(L)/Oil Type 2.5/YAMALUBE 2 Chain Case Capacity(cc)/Oil Grade 350/SAE~75~80.API-GL3 Coolant Capacitv(L)/Type/Ratio --- --
ELECTRI CAL-Spark Plug/Gap(mm) NGK BR9ES/0.7-----0.8 Headlight/Taillight/Meterlight Wattage 60-55/8-23/3.4 Ignition System/Manufacturer C. D. 1. /YAMAHA Ignition Timing 1. 5mm BTDC Pulser Coil Resistance ~'hite/Red-Black:20Q ±2 0% Charge Coil Resistance Bronn~Black:27.5Q ±20%
Red~Black:O. 8Q ±2 0% Lighting Coil Resistance Yellow-----Black:O. 3Q +20% Primary Ignition Coil Resistance 0.2Q±20% Secondary Ignition Coil Resistance 4. 9kQ + 20%
"-MAHA MOTOR CANADA LTD. L-.......J__________ • M MOTEUR DU CANADA LTEE
SV80M
1988 SERVICE DATA
September 9, 1987
~IODEL-
Engine Number/Starting Frame Number ENGINE-Displacement(cc)/Bore X Stroke (mm) Piston Clearance(mm) Piston Ring End Gap (Top/2nd) (mm)
CARBURETOR-Manufacturer/Type/I. D. Number ~fai n Jet Alternate Main Jets Idle Mixture Screw Turns Out Pilot (Slow) jet Float Height(mm) I die RP~I
AUTOLUBE PUMP-Colour(mm) Pump Plun~er Stroke(mm)
DRIVE-Clutch Engagement RPM Shift RPM Secondary Sheave Spring Length(mm) Secondary Spring Rate (kgf/mm)/Preload(kgf) Secondary Drive Gear Ratio Track Tension(mm-kg) Ski Centre to Centre (mm) Ski Toe-in or Toe-out(mm)
CAPACITlES-Fuel tank Capacity(L)/Fuel Type Oil Tank Capacity(L)/Oil Type Gear Case Capacit'dcc)/Oil Grade
ELECTRICAL-Spark Plug/Gap(mm) Headlight/Taillight Wattage Ignition Sys t em/Manufacturer Ignition Timing Pulser Coil Resistance Charge Coil Resistance Lighting Coil Resistance Primary Ignition Coil Resistance Secondary Ignition Coil Resistance
~ S88-D18
SV80~1 (85G) 85G/S5G-000101 Fan-cooled. Reed valve. Single 79/49 X 42 0.035---0.040 0.2---0.4/0. 15---0.35
MIKUNI/B26-20/85GOO ::103.8 #105. ::102.5. ::1 01. 3. ;:100 7/8 #62.5 15.6 ± 1 APPROX. 2200
Yellow 0. 95+ 0.05
APPROX.4000 APPROX. 6700 10S.4 0.55/33 27/44 X 14/46 25---30-10 695 o +35 (Toe out)
-25 (Toe in)
8.6/Unleaded Regular Gasoline 1. 3/YAMALUBE 2 200/SAE #75---80, API-GL3
NGK BR8HS/0.6---0. 7 60-60/8-23 C. D. 1. /YAMAHA 16· BTDC White/Red---Black:440Q ±20~~ Brown--- Black: 560 Q + 20~~ Yellow---Black:O. 7Q±20~~ O. 7Q+20~~ 7. 1kQ ± 20~~
".MAHA MOTOR CANADA LTD. ""'---'--________ • M MOTEUR DU CANADA LTEE _________ ""
SV80EM
1988 SERVICE DATA S88-G19
September 9, 1987
~WDEL- SV80EM (85H) Engine Number/Starting Frame Number 85H/85H- OOOIOI
ENGINE- Fan- cooled. Reed valve. Single Displacement(cc)/Bore X Stroke (ffim) 79/49 X 42 Piston Clearance(mm) 0. 035---0 . 040 Piston Rin~ End Gap (Top/2nd) (mm) 0.2---0.4/0.15---0.35
CARBURETOR-Manufacturer/Type/I. D. Number MIKUNI/B26- 20/85GOO ~lai n Jet ~103 . 8 Alternate Main Jets ~105. ~ 102. 5. ~101. 3. ~100 Idle Mixture Screw Turns Out 7/8 Pi lot (Slow) jet ~62.5 Float Height(mrn) 15.6+ 1 Idle RPM APPROX. 2200
AUTO LUBE PUMP-Colour(mm} Yellon Purn~ Plun~er Stroke(mm) 0.95+0.05
DRIVE-Clutch Engagement RPM APPROX.4000 Shift RPM APPROX. 6700 Secondary Sheave Spring Length(mm) 108.4 Secondary Spring Rate (kgf/mm)/Preload(kgf) 0. 55/33 Secondary Drive Gear Ratio 27/44 X 14/46 Track Tension (mm-kg) 25--- 30- 10 Ski Centre to Centre(mm) 695 Ski Toe-in or Toe - out(mm) o +35 (Toe out)
-25(Toe in) CAPAC I TI ES-Fuel tank Capacity(L}/Fuel Type 8.6/Unleaded Regular Gasoline Oil Tank Capacity(L)/Oil Type 1. 3 /Y AMALUBE 2 Gear Case Capacitv(cc)/Oil Grade 200/SAE ~75---80 . API -GL3
ELECTRICAL-Spark Plug/Gap(mm) NGK BR8HS/0.6---0 . 7 Headlight/Taillight Wattage 60- 60/8- 23 Ignition System/Manufacturer C. D. I./YAMAHA Ignition Timing 16° BTDC Pulser Coil Resistance llih i te/Red--- Black: 440 Q + 20~~ Charge Coil Resistance Brown ........ Bl ack : 560 Q + 20% Lighting Coil Resi stance Yellow ........ Black :O. 7Q±20~~ Primary Ignition Coil Resistance O. 7 Q + 20~~ Secondary Ignition Coil Resistance 7. lkQ + 20~~ Battery Type/Spec. Gravity/Charge Rate GS :GM7 - 3B- l/l . 28/0.8A
(NIHON DENCHI)
VAMAHA MOTOR CANADA LTD. ~ __________________ IMWl MOTEURDUCANADALTEE __________________ -'
EX570
PRODUCT IMPROVEMENTS S88-023
October 7, 1987
During the product presentation at the recent '88 Dealer Snowmobile Conferences, (along with product changes on other models), we were pleased to announce that the EX570 model had numerous improvements made for 1988. This achievement was another example of Yamaha's commitment to meet the demands of an expanding market and to help provide increased dealer and customer satisfaction through improved product quality and design.
The purpose of this bulletin is to clarify Yamaha's position in regards to these improvements and to enable you to answer any owner's inquiries on the subject.
In the first place, Yamaha's policy on all products, for several years has been clearly stated in that improvements to product are ongoing and in no way form an obligation to make retrofits to earlier models . To do so would act counter to our efforts to progress. This holds true for the EX570.
Only by a very concentrated effort in the field and a great amount of dedication and hard work by factory design and production engineers during this past season were we able to effect so many changes in such a short time. We are proud of that fact. This was done with the realization of the importance of this model to the market, as evidenced by its instant popularity and strong sales performance.
Some of the improvements made to the 1988 EX570 can be applied to the 1987 models and an outline of them, including application information, will be sent to you shortly in a technical information service bulletin.
The bulletin was issued for information purposes only and no warranty coverage will be considered unless the part being replaced is faulty and the 1988 part can be installed without additional labour or materials being charged.
There may be one exception to the above and this involves the carburetors .
Some customers did not fully enjoy the use of their EXCITER snowmobiles last season because of carburetion problems.
The original equipment carburetors on the 1987 model provide excellent per formance when properly tuned. However, a percentage of these carburetors had defective flow characteristics and adjustments to eliminate poor throttle response or "bogging" were very difficult. Yamaha will replace these defective carburetors with new '88 slide-type carburetors under warranty in order to satisfy those customers who experienced unresolved carburetion problems last season.
Before exchanging these carburetors you must make absolutely sure that they are defective. All of the normal servicing procedures and adjustments for engine tuning and clutching must have been verified and the unit test ridden to confirm that the carburetors are causing the engine not to perform to its potential.
VAMAHA MOTOR CANADA LTD. L_ .... ---------- • M MOTEUR DU CANADA lTEE
, NOTE:
- 2 -
The '88 carburetors will not provide more power than tors which are adjusted and functioning properly. replacement will only cause customer dissatisfaction will be no noticeable difference in performance.
CARBURETOR EXCHANGE PROGRAM DETAILS
'87 carbureUnnecessary since there
1. The carburetor kit consists of '88 style carburetors, compatible cables, throttle lever and intake manifolds, etc.
2. Unsold units in your dealership may receive the modification only if you have confirmed that the original carburetors are faulty.
3. Order carefully because unused kits cannot be returned to YMCA for credit.
4. The dealer cost for the kit is $242.91 and it may be ordered after October 30th, through regular parts ordering procedures under part n umber 90891-50080.
5. Yamaha is paying for the cost of all parts plus the standard handling charge. Yamaha is asking our dealers to help keep the costs down on this comprehensive program by foregoing profits on kit installation. Yamaha will be paying .5 hours flat rate labour for each unit to cover your actual labour costs.
6. The expiration date of this program is March 31, 1988. Any warranty requests submitted after this date will not be accepted.
7. A technical bulletin will be issued to outline the installation and warranty instructions.
All Snowmobile Dealers
VK540M SERVICE MANUAL CORRECTIONS
October 14, 1987
must be revised to reflect these changes. A copy of the errata sheet, which contains the revised pages, will be distributed by the factory in late October. These updated pages can easily be inserted into your copy of the VK540M Service Manual. For the inte~ this bulletin will provide you with the necessary reference material to service your units.
ITEMS TO BE CORRECfED: ______________ _
1. DRIVE V-BELT INSPECTION: PAGE 2-26
Delete:
Reason:
6. Adjust: • Spacer (Secondary sheave)
According to V-belt width.
The secondary sheave is not adjustable.
2. SHEAVE DISTANCE AND OFFSET ADJUSTMENT: PAGE 2·28 to 2-30
Delete:
Reason:
6. Adjust to 8. Adjust • Sheave offset • Secondary sheave
free play (Clearance)
The design has been changed. The sheave offset can be adjusted by the position of the engine. Production models have not been equipped with the adjusting shims.
3. HINGED EXTENSION ADJUSTMENT: PAGE 2·38
Correct: 2. Adjust: • Hinged extension
Reason: Misprint.
INCORRECT CORRECT Extension adjustment step: Extension adjustment step: e Turn the adjuster CD in or out until specified eTurn the adjuster CD in or out until specified
position. position.
Snow Condition Adjuster Rigidity Snow Condition Adjuster Rigidity
Hard surface Tum in Softer Hard surface Tum in Stiffer
Loose snow Tum out Stiffer Loose snow Tum out Softer
"AMAHA MOTOR CANADA LTD. 1....-----"' __________ • M MOTEUR DU CANADA LTEE ---------~
Bulletin 888-024, Pa~e 2 of 3
4. SLIDE RUNNER INSPECfION: PAGE 2-41
Correct: 2. Measure: • Slide runner thickness Out of specification - Replace.
Reason: Misprint.
INCORRECf CORRECf
,....--..
~ <M, IGYi J
r--"o
I
IGYi ® I
)~
s. SECONDARY SHEAVE (EXPWDED DIAGRAM): PAGE 5-10
Delete: • Delete two shims as illustrated below.
Reason: Misprint. Delete
_~_ ;0;> A SPR ING HOLE POSITl ON :~'
'o. ition "2"
10 _ 11.0 .. ·t .. 4l "·Ito'
Bulletin S88-024, Page 3 of 3
6. SKI AND FRONT SUSPENSION: PAGE 6-10
Delete: • HANDLING NOTES and NOTES ON DISPOSAL
Reason: This model uses the Oil Shock Absorber, not the Gas/Oil Shock Absorber.
EX570L
CARBURETOR EXCHANGE INSTRUCTIONS
October 21, 1987
AFFECTED UNITS
~~ S88-025
All EX570L models with carburetor related drivability problems which can not be corrected by normal service procedures. Please take note of the following before changing the carburetors.
• The kit carburetors will not make the units any faster or run any better unless the unit definitely has defective carburetors.
• The kit carburetors do not make the EX570L the same as the EX570M.
• This program is not a recall campaign, it is a program which will allow you to offer a solution to your customer's which have had carburetion problems with their '87 Exciter during the '86/87 season.
SERVICE PROCEDURES
NOTE: Refer to the assembly diagram on page 4 for an overview of the components to be installed.
VV~NG: ____________________________________________________ __
Gasoline and its vapor are highly flammable and explosive. Keep fuel away from sparks, lit cigarettes, or flame. VVork in a well ventilated area.
1. Remove the left side panel, clutch guard, drive belt and secondary clutch.
2. Disconnect the TORS clamps.
3. Loosen all carburetor joint clamps.
4. Remove the mounting bolts on the right side and upper left rear of the air box (under the access panel).
5. Disconnect the throttle and oil pump cables from the carburetors.
6. Remove the starter (choke) plungers from the carburetors.
7. Disconnect the fuel lines from the carburetors.
8. Remove the carburetors as a set.
9. Remove the old oil pump cable and attach the new one at the pump end.
10. Remove the old intake manifolds and install the new manifolds.
"-MAHA MOTOR CANADA LTD. L........J---------- • M MOTEUR DU CANADA LTEE
illustration 1
Thronle yllvt
Illustration 2
illustration 3
Bulletin S88-025. Pa2e 2 of 5
7 Thron tr ¥v Ir! (cable l
View A
Detail of throttle vaive Installation
Free play 6mm
Mark *
5 Oil pump wire (cable I
* Al ign end of adjust bolt and mark
AdJUstmen t of oil pump wife (cable )
11. Remove the left fuel line and install the new longer fuel line. Route the fuel line under the hold down clamps. See illustration 1.
12. Remove the clear dust covers from the venturi of the new carburetors.
13. Install the new choke cable (starter wire) on the new carburetors. The carbs are marked R and L on the side of the throttle body. The longer end of the choke cable goes to the left carburetor.
14. Install the right carburetor. Before tightening the joint clamps, verify that the joints are seated completely around the carburetor. Install the fuel line and clamp. See illustration 1.
NOTE:
Be sure to mount the carburetors correctly. Jetting is different for right and left carburetors.
15. Repeat step 14. for the left carburetor.
NOTE:
Each carburetor has two coolant fittings on the top for use on 1988 models. Disregard these fittings because they have no function on the '87 model.
16. Install and tighten the air box mounting bolts.
17. Remove the old choke cable (starter wire) from the instrument panel and install the new cable.
18. Remove the handlebar cover and right hand gnp.
19. Remove the old throttle lever assembly and install the new assembly.
20. Install the throttle cables to the carburetor slides. Install one nylon washer ("resin plate") above and below the needle clip. See illustration 2.
21. Connect the throttle and oil pump cable to the throttle assembly and install the hold down spring clamp.
Bulletin S88-025. PS2e 3 of 5
r-~ Stiner wtre (choke c.bH:1
22. Connect the TORS wire to the throttle lever assembly and assemble the handlebar cover. Re-glue the right-hand grip. f::
~ -
Frte pla y 0.5 - 1.5 mm f I.::;
[
~
L----
23. Connect the TORS wires at the carburetors, using the sub lead.
24. Adjust the oil pump cable freeplay. See illustration 3.
25. Adjust the choke cable freeplay. See illustration 4.
Adjust ment of staner w ire {choke cable t 26. Adjust the throttle cable freeplay. See illustration 1. illustration 4
® CDI un it __
Illustration 5
I d Ii ng speed: 1,500 rpm Pi lot screw turns out : 5/ 8
27. Synchronize the carburetors and adjust the TORS switches.
28. Remove the old CDI unit and install the new unit. See illustration 5.
29. Before installing secondary clutch reset preload to 80° (A-3) using one clutch shim.
30. Install the secondary clutch, drive belt, clutch cover, and side panel.
SPECIFICATIONS
Secondary spring pre load: 50° ~ 80° (A-3)
Secondary clutch sh im: 2 pcs_ ~ 1 pc. NOTE : Please use clutch shim as illustration.
31.6 mm
2 SPACERS 1 SPACER
~I I I
30.6 mm
NO SPACERS
29 mm
DISCARD V-BEL T
Bulletin S88-02S. Paee 4 or 5
ASSEMBLY DIAGRAM REF NO. OESCRIPTION I O'TYNNIT I
~ CARBURETOR ASSY ILl 1
'l) i CARB URETOR ASSY IR) 1 I
2 .1) I MANIFOLD
® I CLAMP 2 rJ; OIL PUMr WIRE Icable l 1 @ STARTER WIRE Icable l 1
Q) THROT'TLE WIRE Icable l 1
@ LEVER HOLDER ASSY 1
@ CO l UN IT 1
G WIRE SUB LEAD 1
1} NUT AOJUSTING 2 .j} FUE L PIPE III 1
0 WIRE CLIP 1
, (?)COI un It
• Bulletin 888-025, Pa2e 5 of 5
PARTS INFORMATION
The kits will be available November 1st, 1987. e are only a limited number of kits available. Please order only the kits you require as they cannot be returned for credit. We are certain that the units requiring this modification represent no more than 20% of units sold. If you require more information regarding your requirements, please call your regional service representative for assistance.
PART NAME PART NUMBER DLR.COST
Carburetor kit 90891-50080-00 $242.91
WARRANTI
TROUBLE CODE: S8825
PARTS: 90891-50080-00 (Dlr net + 10% for handling will be credited to your parts account.)
LABOUR: 0.5 hrs.
NOTE:
1. The expiration date for this program is March 31, 1988. Any warranty requests submitted after this date will be rejected.
2. Submit a warranty request only for those units which have actually been modified.
3. In order to receive credit, the old carburetors must be tagged and returned with the warranty request.
4. D.E.Y.S. system users please note that since a campaign number has been attached to the trouble code, the regular method of submitting warranty must be followed.
5. As indicated in bulletin S88-023, the actual time required to install the kit is 1,0 hours. Yamaha is asking our dealers to forego labour profits in order to keep the cost of this program down.
SV80MjSV80EM
YAMAHA DECAL ON FRONT EDGE OF SHROUD
November 11, 1987
AFFECTED UNITS
Any SV80M/EM which you find has lost part of the Yamaha decal and is still within the units normal warranty period.
PARTS INFORMATION
I PART NAME I PART NUMBER I DLR. COST
I Emblem, Yamaha I 99241-00030 $1.78
WARRANTY
To obtain warranty coverage for this decal, please indicate the following on your warranty request.
TROUBLE CODE:
PARTS:
LABOUR:
08
99241-00030-00 (Dlr. Net + 10% for handling will be credited to your parts account. )
0.2 hours
NOTE: ______________________________________________________ _
1. You may indicate up to 10 serial numbers on one request.
2. Submit a request only for the units you have actually performed this replacement.
"-MAHA MOTOR CANADA LTD. L....j---------- • M MOTEUR DU CANADA LTEE ---------"
All Snowmobile Dealers
Part Number Reference on '88 Literature
November 18,1987
This bulletin has been prepared by the Publications Department as a part number reference bulletin on '88 literature for snowmobiles. This bulletin will serve as an update of the present service literature guide microfiche until a new microfiche has been completed.
If you have any further questions concerning service literature, please contact Publications in Toronto.
VAMAHA MOTOR CANADA LTD. __________ • M MOTEUR DU CANADA LTEE
EXCITER
1988EX570M
1988 EX570EM
V-MAX
1988 VMX540M
SRV
1988 SR540M
XL-V
1988XLS40M
PHAZER
1988PZ480M
I
SERVICE ASSEMBLY OWNER'S
EN - 84M-28197-20 No manual issued, 84M-28199-70
FR - 84M-28197-WO see EX570L
82M-28107-70
EN - 84M-28197-20 No manual issued, 84M-28199-70
FR - 84M-28197-WO seeEX570L
82M-28107-70
OWNER'S/SERVICE ASSEMBLY
83X-28199-70 No manual issued,
see VMX540K
81K-28107-70
SERVICE ASSEMBLY OWNER'S
-
No manual issued, No manual issued, 84L-28199-70
see SR540H see SR540J
8V9-28197-70 S/S/M 8YO-28107-70
8L9-28197-70 S/M
No manual issued, No manual issued, 83W-28199-70
seeXL540J seeXL540J
8Y7-28197-70 S/S/M 8Y7-28107-70
8H8-28197-70 S/M
No manual issued, No manual issued, 83V-28199-70
seePZ480H seePZ480J
8VO-28197-70 80K-28107-70
- 1 -
SERVICE ASSEMBLY OWNER'S
PHAZERE
1988 PHAZER E No manual issued, No manual issued, 83V-28199-70
seePZ480EJ seePZ480EJ
80K-28197-70 S/S/M 80K-28107-70
8VO-28197-70 S/M
ENTICER
1988ET340M No manual issued, No manual issued, 83T-28199-70
see ET340G seeET340K
8T6-28197-70 80X-28107-70
EXCEL
1988EC340M No manual issued, No manual issued, 84H-28199-70
seeET340G see EC340K
8T6-28197-70 80Y-28107-70
TRAPPER
1988 ET340TM No manual issued, No manual issued, 83T-28199-70
see ET340TG seeET340TK
8T6-28197-70 80X-28107-70
TRAPPER
REVERSE
1988 ET340TRM No manual issued, No manual issued, 83T-28199-70
see ET340TRK see ET340TRK
81W-28197-70 80X-28107-70
INVITER
1988CF300M No manual issued, No manual issued, 83U-28199-70
see CF300K see CF300K
81E-28197-70 81E-28107-70
BRAVO
1988BR250M No manual issued, No manual issued, 83Y-28199-70
seeBR250F see BR250]
r 8R4-28197-70 80V-28107-70
- 2 -
I·i.·} .. · ... SERVICE ASSEMBLY OWNER'S
BRAVO TRAPPER
1988 BR250TM No manual issued, No manual issued, 83Y-28199-70
see BR250TSH seeBR250TK
8X8-28197-70 S/S/M 80V-28107-70
8R4-28197-70 S/M
BRAVO
TRANSPORTER
1988 BR250TSM No manual issued, No manual issued, 83Y-28199-70
see BR250TJ see BR250TSK
8Yl-28197-70 S/S/M 80V-28107-70
8R4-28197-70 S/M
VIKING
1988 VK540M EN - 84R-28197-20 84R-28107-70 84R-28199-70
FR - 84R-28197-WO
SNOSCOOT
1988 SV80M EN - 85G-28197-20 85G-28107-70 85G-28199-70
FR - 85G-28197-WO
SNOSCOOT E -
1988SV80EM EN - 85G-28197-20 85G-28107-70 85G-28199-70
FR - 85G-28197-WO
- 3 -
SERVICE BULLETIN
To All Snowmobile Dealers
January 4, 1988
It has been brought to our attention that the Snowmobiler's Safety Guide, which is usually included with each new Yamaha snowmobile, has inadvertently been omitted from some crates of the 1988 models.
Any dealer who has purchased one or more of these units without the guide will have a computer report attached to this bulletin showing their model/serial numbers and also any available retail information supplied to Yamaha.
Further to this, a quantity' of the Snowmobiler's Safety Guides corresponding to the number of units on each list is being sent out under separate cover to ensure an adequate supply of the guides are available for your distribution.
In the interest of safety and customer satisfaction, please ensure that all purchasers of the affected units receive their copy of this very important publication.
We apologize for any inconvenience caused by the omission of these manuals and we thank you for your anticipated cooperation.
VAMAHA MOTOR CANADA LTD. !--------____ • M MOTEUR DU CANADA LTEE
EX570M/EM
OIL TANK HEAT SHIELD BOLTS LOOSENING
January 27, 1988
on vibration. In order to prevent this, we have decided to NFJ! LOCK the oil tank bolts.
SERVICE PROCEDURES:
• Remove the four heat shield bolts and remove the heat shield. Bend the lower edge of the R.H. oil tank shield, as indicated in the illustration, to increase the clearance between the shield and lower coolant hose. This will prevent the hose from being cut.
• Remove the oil tank stay bolts, one at a time, apply NEJI LOCK (part number 90890-70043 or equiValent) to the threads and reinstall torque to spec. (6 Nm/0.6 m.kg/4.3 ft.lb)
• Apply NEJI LOCK (part number 90890-70043 or equivalent) to the threads of the heat shield bolts and reinstall.
• Check that the routing of the carburator heat hose will not allow it to contact the notch in the oil tank heat shield.
• NOTE: There is a fibre washer installed between the oil tank and the heat shield.
• TORQUE TO SPEC. (6 Nm/0.6 m.kg/4.3 ft.lb)
-- Using pliers, fold this edge of the beat shield over to eliminate the sharp edge
~~~----~------I
VAMAHA MOTOR CANADA LTD. L.......Jo--------- • M MOTEUR DU CANADA LTEE ________ -'
Bulletin S88-029, Page 2 of 2
PARTS INFORMATION:
There should be no parts required for this procedure. However, if you find that a bolt has loosened and cannot be found , you may claim a replacement. .
WARRANTY INFORMATION:
TROUBLE CODE:
PARTS;
LABOUR:
S8-29
Claim for bolts which may have loosened and are lost.
0.2 hours
EX570MjEM and EX570L with S88-025 Carburetor Modification
Additional Information on Initial Set-up and Carburetor Jetting
February 3, 1988
~ S88-031
Some EX570M/EM, and some EX570L units with the 1988 style carburetor kits have experienced piston seizure. Inspection of these units has shown various causes for different machines. We have found that standard specifications have a narrow safety margin: if one or more specifications (such as jetting, oil pump output, piston clearance) is at minimum or out of spec., or the cooling system is not properly bled, the chance for seizure is greater, particularly if the machine is ridden hard. To avoid this, each machine must be set-up in a way which ensures a safety margin. Use the recommendations in this bulletin which includes changing to richer jetting for 0-600 m (0-2000 ft.) altitude.
ADDITIONAL SERVICE INFORMATION:
1. Use a 40:1 fuel oil mixture for the first tank of fuel (premium unleaded fuel).
2. Remove the spark plugs and squirt two shots of Yamalube 2 into each plug hole before initially starting the engine.
3. Check all fuel lines for kinks where the line takes a sharp bend, especially near the petcock and at the carburetor fittings. Correct any kinks by rerouting and or relieving them so the kinking will not reoccur.
4. For EX570M/EM models, set the fuel petcock cable so it has 1 mm freeplay. Lack of freeplay can cause the plunger to partially restrict the fuel flow.
5. For EX570M/EM models, set the oil pump cable adjuster 2 mm richer (two turns out from the standard adjustment). No additional adjustment is needed for converted EX570L models.
6. Bleed the cooling system as per bulletin S87-016.
NOTE: The instructions indicate the rear bleed fitting and the bleed bolt on the thermostat housing should allow coolant to run out until the air bubbles disappear from the coolant. The time for this and the amount of coolant loss, of course, will vary from machine to machine, however, be sure there is no air left in the cooling system.
7. On units which have experienced piston seizure, be sure the piston to cylinder clearance is at least 0.075 mm (0.003") after repair.
V'AMAHA MOTOR CANADA LTD. ~ ___________________ IjWl MQTEURDUCANADALTEE __________________ ~
Bulletin S88-031, Page 2 of 2
CARBURETOR .JEITING:
Main Jet: Sea level spec., use #340 instead of #320. High Altitude - no change necessary.
Jet Needle Clip Position: Change from #3 to #4.
Power Air Jet: L.R. change from 1.7 to 1.3. R.R. change from 1.3 to 1.1.
NOTE: Use the 1.3 power air jet from the R.H. carburetor in the L.H. carburetor.
PARTS INFORMATION:
• #340 main jets (part number 137-14143-68-00) are included m the crate with EX570M/EM models .
• 1.1 power air jet part number 239-14172-11-00
WARRANTY INFORMATION:
EX570M/EM EX570L with Carbo Kit
TROUBLE CODE: S831 TROUBLE CODE: S83A
PARTS: 1.1 Power Air Jet PARTS: Main Jet #340 x 2
1.1 Power Air Jet
LABOUR: 0.8 hours LABOUR: 0.8 hours
NOTE: Use these recommended changes when performing the initial set-up or when setting up a unit which you have repaired after a seizure.
When you have disassembled carburetors for jetting changes, verify that the float height and carburetor synchronization is correct.
For your customers who want to play it safe, perform the changes indicated in this bulletin.
All Snowmobile Dealers
EX570L/M RELIABILITY UPDATE
May 18,1988
~ S88-033
For the 1988 EX570, the carburetors were changed from floatjbutterfly to VM" style. Additionally, we made available a VM" carburetor kit for any EX570L (1987) model that experienced carburetion problems during the previous season.
However, some units with JIM style carburetion experienced piston seizure this past season because the carburetor calibration was not co"ect. Technical bulletin S88-031 listed additional information on set-up and richer jetting to counter measure the problem. This richer jetting eliminated piston seizures but also reduced engine performance and caused customer dissatisfaction.
Yamaha has made extensive changes to the EX570 carburetion system for the 1989 Exciter. These include new jetting, repositioning the inlet for the air box, heat shielding on the muffler and more ventilation for the engine room area.
These changes are under final evaluation, and have recently been tested in the Canadian Rockies, where problems related to high altitude jetting specs and riding conditions were prominant. We are now confident that the problems are eliminated and normal performance has been restored.
A technical bulletin will be issued as soon as the part numbers, etc. have been set-up by the factory. This bulletin will apply to all 1988 and JIM equipped 1987 EX570 models, in or out ofwa"anty. It will deal with the changes to be made at no cost to your EX570 customers.
Additionally, for any future cases of piston seizure on EX570 models with JIM carburetors, in or out of wa"anty, please consult your Regional Service Representatives. They will assist you in the proper repair and w~anty authorization procedure.
Yamaha is taking these measures to maintain its reputation for manufacturing high quality products and keeping customers satisfied. Yamaha apologizes for the inconvenience this situation may have caused you and your customers. We would also like to take this opportunity to thank you for the extra effort extended by yourselves during the past season in dealing with the problems experienced by Exciter owners.
Sincerely,
YAMAHA MOTOR CANADA SERVICE DIVISION
VAMAHA MOTOR CANADA LTD. L......I""""'---------- • M MOTEUR DU CANADA LTEE
ALL SNOWMOBILE DEALERS
EX570 FACTORY MODIFICATION S88- 034
June 22, 1988
In order to assure your EX570 customers of our support, and our concern that their snowmobiles perform reliably and well, we are sending them a letter asking them to return their unit to you to have a factory modification carried out.
This letter is intended for all 1988 model owners and those 1987 owners who had their units equipped with VM carburetors due to poor performance. (Re: bulletin S88-025, issued October 21, 1987) .
The kit referred to in the letter will consist of new needles and jets for both carburetors, and a new air box. An additional muffler heat shield will be added for high altitude applications only. In effect, with the changes mentioned these units will have been brought up to 1989 model carburetor specifications .
There is no need to make changes to the 1987 models which are equipped with the original float butterfly- type carburetors.
An optional fresh air deep snow conditions. moderately priced and extreme.
kit will also be made available for high altitude and This kit is not supplied free of charge but will be
intended for those owners whose riding demands are
Full details regarding installation instructions , warranty application and parts ordering information will be sent to you as soon as possible.
A copy of the owner letter is enclosed for your information . If you have any questions, please contact your Regional Service personnel.
"-MAHA MOTOR CANADA LTD. L....._.:.----------- • M MOTEUR DU CANADA LTEE
VK540EN
rong Parts in the Crate
une 28, 1988 S88-035
The factory has advised us that the wrong type of washer was put in the crate by mistake. A spring washer instead of the correct flat washer was packed.
Affected Units
VK540EN - 86R-000101 - 86R-000200
Procedure
When assembling the unit use the correct (plain) washer as shown in the illustration.
Parts Information
Correct Plain Washer Installation
Attached to the outside of the crate on the units affected you will find a packing slip pouch containing the correct washers and a copy of this bulletin.
The washer installation is part of normal assembly. Therefore there is no warranty allowance.
Bulletin is issued for your information only .
VAMAHA MOTOR CANADA LTD. L....._ ..... --------__ • M MOTEUR DU CANADA LTEE
SV80jSV80E
ASSEMBLY MANUAL CORRECTION
July 27, 1988
~ S88-036
It has come to our attention that the torque specification given for the steerin~ relay rod bolt was printed incorrectly in the Assembly Manual (part number 85G-28107-70-00). Please revise the information in your manual as per the information below.
SV80/SV80E ASSEMBLY MANUAL (Page -2-)
1 StHring relay rod 2 * (A ight and left)
2 U nut 2 V(#2) d - 10 (0.39 )
3 Coner p in 2 V(#2)
A: Bend the end of coner pin . A: Replier J'extrerrute de 1a l oupille fendue.
37 (3.7 kg-m) [26.6 ft.-l b.]
Make sure the Steering Relay Rod Bolt Threads have been cleaned of grease or oi l.
"-MAHA MOTOR CANADA LTD. ~~~ ___________________ IjWl MOTEURDUCANADALTEE __________________ -'
EX570M/EM and EX570L with S88-025 Carburetor Change
CARBURETOR/Am BOX CHANGE INSTRUCTIONS
September 21, 1988
air box described in Bulletin
AFFECTED UNITS
All EX570M, EX570EM and all EX570L models which have had the carburetor change as per Bulletin S88-025.
SERVICE PROCEDURE
WARNING: Gasoline and its vapour are highly flammable and explosive. Keep fuel away from sparks, lit cigarettes, or fIame. Work in a well ventilated area.
1. Remove the left side panel, clutch guard , drive belt and secondary sheave .
2. Disconnect the TORS switches.
3. Loosen all carburetor joint clamps.
4. Remove the mounting bolts on the right side and upper left rear of the air box (under the access panel).
5. Remove the throttle valve assemblies from both carburetors.
6. Remove the starter (choke) plungers from both carburetors.
7. Remove the coolant lines from the carburetors.
8. Remove the fuel lines from both carburetors.
9. Remove both carburetors.
10. Remove the slides from the throttle cables. Disconnect the ignition coil primary leads, remove the CDI box and remove the air box .
11. Remove the ignition coil and carburetor boots from the air box.
NOTE: The screws may have Locktite and be very difficult to remove. If they must be replaced, the part number is 92501-06025.
12. Remove the screws fastening the two halves of the air box.
13. Assemble the air box kit (90891 - 50097) using the screws and baffle from the original air box .
"-MAHA MOTOR CANADA LTD. L..._)----------- • M MOTEUR DU CANADA LTEE
BULLETIN S88-037. Page 2 of 4
14. Install the ignition coil and carburetor boots on the new air box.
15. Install the new air box leaving the mounting bolts loose until carburetors are installed.
16. Install the CDI box on the air box.
17. Install the carburetor jet kit.
ORIGINAL SPEC. S88-031 NEW SPEC.
Left Right Left Right Left Right
Power Jet 160 200 160 200 200 200 Power Air Jet 1.7 1.3 1.3 1.1 1.5 1.5 Needle Jet .Q-6 Q-6 Q-6 Q-6 P-6 P-6 Jet Needle 6DH7(3) 6DH7(3) 6DH7(4) 6DH7(4) 6FL68(3) 6FL68(3) (clip pos.)
Main Jet 320 320 340 340 320 320
NOTE: You may find using a toothpick helps remove the power air jets.
18. Assemble the slides on the throttle cable cap assemblies .
19. Verify float heights (18.1 mm + 1 mm) in both carburetors.
20. Install both carburetor bodies and tighten all carburetor joint clamps.
21. Install both throttle valve assemblies.
22. Install both starter (choke) plungers.
23. Install fuel and coolant hoses.
24. Tighten the air box securing bolts.
25. Install the secondary clutch, drive belt, clutch cover and side panel.
26. Adjust engine idle speed, throttle cable freeplay, carburetor synchronization, starter cable freeplay and oil pump cable freeplay as per the Service Manual.
NOTE: We have found that carburetor adjustment is easier if you use the following method:
1. Adjust both starter cables freeplay.
2. With the TORS carburetor switches bypassed, run the engine.
- Adjust engine idle speed (1500 RPM).
- Synchronize the carburetors using the carburetor synchronization tool (YS -33275) at idle and with the throttle opened to approximately 3,000 RPM.
BULLETIN S88-037 I Page 3 of 4
- Adjust throttle cable free play .
- Adjust oil pump cable freeplay.
3. Shut off the engine, remove the carburetors and using your pocket tester, set the TORS carburetor switches.
4. Reinstall the carburetors with the TORS switches connected and recheck idle speed and carburetor synchronization.
PARTS INFORMATION
PART NUMBER DESCRIPTION DEALER COST
90891-5 00 96 EX570 Jet Kit $15.04 includes: PWJ (11200) 1 pc
PWAJ(1. 5) 2 pes NJ (P-6) 2 pes IN (6FL68) 2 pes MJ UI320 ) 2 pes
90891-50097 EX570 Air Box Kit $ 7.76
WARRANTY
The owner of each registered affected unit should have received a pre - printed Factory Modification Notice and has been instructed to bring the notice with the unit when the modification is to be done. To receive credit for the parts and labor involved in this modification, you must detach the form , fill in the appropriate information, being sure that it is signed by both the customer and the dealer and attach the form to a Warranty Request Form , using the following information:
TROUBLE CODE: S8 - 37
PARTS: 90891-50096 (1 pc.) 90891-50097 (1 pc .)
Dealer net + 10% will be credited.
LABOUR: 1.2 hours
NOTE: You may submit up to ten serial numbers on one Warranty Request FOnD.
If the customer has not brought the notice, submit a Warranty Request FOnD.
• BULLETIN S88-037, Page 4 of 4
ADDITIONAL SET-UP INFORMATION
The EX570 has ventilation points for the under-hood area which come with cov ers. The nose hole has a quick flip - up baffle which can be opened or closed easily when out on the trail . The vents on either side of the hood , as well as the louvered panel under the headlight, have baffles which are secured by threaded screws. These baffles are placed in these areas to prevent too much snow entering the under - hood area when riding in deep powder snow conditions. The performance of this snowmobile will generally be best with the baffles removed and we recommend that this be done for most riding conditions.
Riding in deep powder snow conditions, will require that these baffles be closed/reins~ed.
For high altitude deep powder snow conditions encountered in mountainous areas, there are additional modifications which may be required. For information regarding these modifications, please consult your Regional Service Representative.
