BUSINESS PROCESS RE-ENGINEERING AND ORGANIZATIONAL
PERFORMANCE OF COMMERCIAL STATE CORPORATIONS IN KENYA
GEORGE OUMA OGADA
A RESEARCH PROJECT SUBMITED IN PARTIAL FULLFILMENT OF THE
REQUIREMENT FOR THE AWARD OF DEGREE OF MASTER OF BUSINESS
ADMINISTRATION, SCHOOL OF BUSINESS, UNIVERSITY OF NAIROBI
NOVEMBER, 2017
ii
DECLARATION
This research project is my original work and has not been submitted for a degree in any
university.
Signature: ….…………………………….. Date: ………………………………..
GEORGE OUMA OGADA
REG NO: D61/77207/2015
This research project has been submitted for Master of Business Administration examination
with my approval as university supervisor
Signature: ….…………………………….. Date: ………………………………..
DR. P.O. MAGUTU
DEPARTMENT OF MANAGEMENT SCIENCE
SCHOOL OF BUSINESS, UNIVERSITY OF NAIROBI
iii
DEDICATION
To my daughter Elsie and to my comrades with whom we sail in this same boat
iv
ACKNOWLEDGEMENT
My sincere thanks, gratitude and appreciation, first, to the Almighty Everlasting God, the giver
of life, strength and wisdom and from whom all good things come, for being with me always.
Secondly, to my humble Supervisor Dr. Magutu P. Obara of the University of Nairobi for his
fruitful advice and direction and to Mrs. Zipporah Kiruthu whose moderation efforts were
beyond words. Finally, much thanks to my family members and my colleague, Sam Ochieng, for
their patience, support and encouragement that contributed towards making this work a success.
v
ABSTRACT
The business environment is constantly changing and so it is imperative that organizations adapt
to changes that can support its survival and prosperity (Johnsons and Scholes, 2008). The core
outcomes of BPR activities are improvement profit maximization and cost reduction (Al-Mashari
and Zairi, 2001). The success of every organization begins by recognition of customers and their
input to the firm. This is achieved through re-engineering the core business processes in an
organization with the main motive of improving shareholders value perceived through increased
ROI, Market Share, Debt to Asset Ratio and Profitability. Business Process Re-engineering
therefore ensures that customers are served faster and that they get the best value for money and
that products and services required are delivered in a manner most convenient to them while
minimizing cost and maximizing on profitability enhanced leading to improved organizational
performance. (Hammer and Champy, 2001). The study investigated the extent to which Business
Process Re-engineering implementation affect Commercial State Corporations in Kenya. It also
looked into the relationship between Business Process Re-engineering and organizational
performance of Commercial State Corporations in Kenya. The study adopted a census in which
the entire population was considered. Both primary and secondary data sources were used. The
target population was the 24 Commercial State Corporations in Kenya listed under State
Corporations Act and recognized in the Kenya Gazette. The data was collected by use of semi-
structured questionnaires and respondents were management of commercial state corporations.
The quantitative data generated were analyzed with the aid of Statistical Package for Social
Sciences (SPSS). The study findings revealed that there is a significant relationship between
BPR Methodologies and organizational performance. The study used Pearson’s correlations as
model of analysis. These results found imply that PADM BPR Methodology contribute more to
the organizational performance of commercial state corporation followed by Davenport’s &
Short’s BPR Methodology, OO-BEM BPR Methodology, Hammer & Champy BPR
Methodology and finally Integrated BPR Methodology. BPR Methodology collectively
accounts for 70.5% of change in organizational performance of commercial state corporations in
Kenya. It is recommended that all the commercial state corporations to embrace BPR
Methodology that best improve on their ROI, Profitability, Market share and Debt & Liquidity
ratio. The commercial state corporations also need to adopt BPR Methodology that addresses the
trendy emerging issues within their respective industries to boost organizational performance.
vi
TABLE OF CONTENTS
DECLARATION .......................................................................................................................................... ii
DEDICATION ............................................................................................................................................. iii
ACKNOWLEDGEMENT ........................................................................................................................... iv
TABLE OF CONTENTS ............................................................................................................................. vi
LIST OF FIGURES ................................................................................................................................... viii
CHAPTER ONE: INTRODUCTION ........................................................................................................... 1
1.1 Background ............................................................................................................................................. 1
1.1.1 Business Process Re-engineering ....................................................................................................... 2
1.1.3 Commercial State Corporations in Kenya ......................................................................................... 4
1.2 Research Problem ................................................................................................................................... 5
1.3 Objective of the Study ............................................................................................................................ 6
CHAPTER TWO: LITERATURE REVIEW ............................................................................................... 8
2.1 Introduction ............................................................................................................................................. 8
2.2 Theories supporting the study ................................................................................................................. 8
2.2.1 Theory of Constraints.................................................................................................................... 8
2.2.2 Theory of organizational change .................................................................................................. 8
2.2.3 Balanced Scorecard ...................................................................................................................... 9
2.3 Business Process Re-engineering ............................................................................................................ 9
2.3.1 Hammer and Champy methodology ............................................................................................ 9
2.3.2 An integrated BPR methodology by Muthu, Whitman and Cheraghi ....................................... 10
2.3.3 Davenport’s and Short’s methodology....................................................................................... 10
2.3.4 Object Oriented Business Engineering Methodology (OO-BEM) Methodology ...................... 11
2.3.5 Process Analysis and Design Methodology (PADM) ................................................................ 11
2.4 Organizational performance .................................................................................................................. 12
2.5 Empirical Literature Review ................................................................................................................. 13
2.6 Conceptual Framework ......................................................................................................................... 14
CHAPTER THREE: RESEARCH METHODOLOGY.............................................................................. 15
3.1 Introduction ........................................................................................................................................... 15
3.2 Research Design .................................................................................................................................... 15
3.3 Population ............................................................................................................................................. 15
3.4 Data Collection ..................................................................................................................................... 15
3.5 Data Analysis and Presentation ............................................................................................................. 16
vii
CHAPETR FOUR: DATA ANALYSIS, INTERPRETATION AND PRESENTATION ......................... 17
4.1 Introduction ........................................................................................................................................... 17
4.2 The Response Rate ................................................................................................................................ 17
4.3 Reliability Analysis ............................................................................................................................... 17
4.4 Demographic Characteristics ................................................................................................................ 18
4.5 The Extent of Business Process Re-engineering (BPR) Implementation ............................................. 19
4.5.1 Hammer and Champy BPR Methodology ................................................................................. 19
4.5.2 Integrated BPR Methodology .................................................................................................... 20
4.5.3 Davenport’s and Short’s BPR Methodology.............................................................................. 21
4.5.4 OO-BEM BPR Methodology ..................................................................................................... 22
4.5.5 PADM BPR Methodology ......................................................................................................... 23
4.6 Inferential Statistics Analysis on Relationship ..................................................................................... 24
4.6.1 Correlation of Main Variables ................................................................................................... 24
CHAPTER FIVE: SUMMARY, CONCLUSION AND RECOMMENDATION ..................................... 26
5.1 Introduction ........................................................................................................................................... 26
5.2 Summary of the findings ....................................................................................................................... 26
5.3 Conclusion ............................................................................................................................................ 29
5.4 Limitations of the Study ........................................................................................................................ 30
5.5 Recommendation .................................................................................................................................. 30
5.6 Suggestions for further Research .......................................................................................................... 31
REFERENCES ........................................................................................................................................... 32
APPENDICES ............................................................................................................................................ 34
APPENDIX I: Letter of Introduction ...................................................................................................... 34
APPENDIX II: Questionnaire ................................................................................................................. 35
APPENDIX III: List of Commercial State Corporations in Kenya ........................................................ 39
viii
LIST OF FIGURES
FIG: 2.1 CONCEPTUAL FRAMEWORK .............................................................................................. 14
ix
LIST OF TABLES
TABLE 4.1: RELIABILITY COEFFICIENTS......................................................................................... 17
TABLE 4.2: COMMERCIAL STATE CORPORATION ........................................................................... 18
TABLE 4.3: HAMMER AND CHAMPY BPR METHODOLOGY ............................................................ 20
TABLE 4.4: INTEGRATED BPR METHODOLOGY ............................................................................. 20
TABLE 4.5: DAVENPORT’S AND SHORT’S BPR METHODOLOGY .................................................... 21
TABLE 4.6: OO-BEM BPR METHODOLOGY .................................................................................. 22
TABLE 4.7: PADM BPR METHODOLOGY ...................................................................................... 23
TABLE 4.8: PEARSON CORRELATION ANALYSIS ............................................................................ 24
x
LIST OF ABBREVIATIONS
BPR Business Process Re-engineering
GOK Government of Kenya
ICT Information and Communication Technology
OM Operations Management
OO-BEM Object Oriented Business Engineering Methodology
PADM Process Analysis and Design Methodology
ROI Return on Investment
SPSS Statistical Package for Social Sciences
1
CHAPTER ONE: INTRODUCTION
1.1 Background
The business environment and process is constantly changing and so it is imperative for
organizations to adapt to these changes in order to survive and prosper (Johnsons and Scholes,
2008). Operations Management (OM) as a business function is responsible for planning,
coordinating, and controlling the resources needed to produce products and services for a
company (Magutu, P. O., Nyamwange, S. O., Kaptoge, G. K, 2010). Its activities include design,
operation, and improvement of systems that create a firm’s primary products and services. The
fundamental purpose of OM is to deliver value to customers through the improvement in
operating system. The core outcomes of OM activities are improvement in cost, quality, speed
and flexibility. This translates to low cost production, faster delivery, product/service variety and
superior customer service (Al-Mashari and Zairi, 2001). Customer value is the base for every
organization’s success and it is therefore important for the management to design and develop
customer service operations that support customer acquisition, retention, cost management and
profitability for more Efficiency and Effectiveness. This may take one or more of the following
approaches: Automation, Process improvement, Paradigm shift and Business Process Re-
engineering
The success of every organization begins by recognition of customers and their input to the firm.
Customers would be more willing to remain tied to a firm only when they get what they want
from it. As the business environment changes, so is the customers need and therefore a firm also
need to adapt to the dynamics in order to be at par with its customers’ requirements. This is
achieved through re-engineering the core business processes in an organization with the main
motive of improving the value of products and services as perceived by the firm’s internal and
external customers. This involves complete overhaul of a firm’s old ways of carrying out its
processes and replacing them with new ways which are more effective and more efficient. This is
aimed at reduction in cost of production and production time while increasing the quality and
variety of products and services. Business Process Re-engineering therefore ensures that
customers are served faster and that they get the best of whatever products and services they
require and in the manner most convenient to them. In this sense, customer value is enhanced
leading to improved organizational performance. (Hammer and Champy, 2001).
2
1.1.1 Business Process Re-engineering
Business Process Re-engineering (BPR) is a Radical redesign of core business processes to
achieve dramatic improvements in cost, quality, service, speed, cycle time and overall
productivity. It is a process that cuts across an organization’s various levels with the main focus
on satisfying customer requirements and expectations. It calls for an organization to completely
abandon its old ways of operations and adapt to new ways of thinking for improved
organizational performance (Hammer and Champy, 2001).
The most common methodologies applied towards BPR implementation include the following:
Hammer and Champy methodology based on business processes, jobs, managers and values as
the four points of business system diamond. Davenport’s and Short’s methodology emphasizes
on Information Technology as an integral part of BPR. Object Oriented Business Engineering
Methodology (OO-BEM) by Jacobson that begins by envisioning and reverse engineering to
forward engineering. A fourth methodology, the Process Analysis and Design Method (PADM)
features a framework of tools and techniques for iterative activities. All these methodologies
follow the basic phases of defining the business vision, process selection, analysis, design,
implementation and review for continuous improvement. An integrated BPR methodology by
Muthu, Whitman and Cheraghi, gives a similar approach and consolidates the key steps in BPR
(Muthu, Whitman and Cheraghi, 2004).
An organization would be driven to re-engineer its processes due to various factors. Where there
is a substantial gap between stake-holders expectation and actual organizational performance in
business processes such as production quality and customer care services. Quality of output may
be improved by ensuring better input materials while for customer care, this may involve hiring
professionally qualified customer care personnel with excellent skills. Organizations would be
compelled by both internal and external forces to reengineer their processes. These are
organizations that are either in deep financial crisis, just about to fall or those that are aggressive
and ambitious to prosper in business. Successful implementation of BPR methodologies leads an
organization to improve on efficiency and effectiveness of its processes, reduction in operational
costs, faster service delivery due to reduction in throughput time, higher flexibility in terms of
alternatives and high quality service hence increasing customer value (Muthu, Whitman and
Cheraghi, 2004).
3
1.1.2 Organizational performance
The fundamental purpose of Operations Management is to deliver value to customers through
improvement in operating system Efficiency and Effectiveness. This in turn leads to
Organizational performance improvement driven by increased customer value. Customer value
refers to a customer perceived preference for a product and evaluation of that product’s
attributes, performance and consequences arising from its use that facilitates achieving the
customer’s goals and purpose in using the product. Low cost production, faster delivery,
product/service variety and superior customer service increase customer value (Sekeran, 2000).
Organizational performance encompasses financial performance as measured by Return on
Investment (ROI), product market performance and shareholder return (Richard et al, 2009). It is
the actual output or result of an organization measured against its goals and objectives. ROI is
measured in terms of profits from an investment less total costs and divided by total costs. The
formula is: ROI = (Investment Revenue – Investment Cost)/Investment Cost. The main reason
for this measure is to help a firm benchmark against the entire industry hence realize its areas of
weaknesses towards customer satisfaction and for the firm to adjust accordingly for better
organizational performance. It acts as a control measure that is also vital in planning decisions.
The balanced scorecard is a tool that may be applied in measuring organizational performance
based on its four main perspectives: Financial, Learning and growth, Internal Business Process
and Customer perspective. The customer has the upper hand in today’s business especially with
the introduction of diverse product alternatives to choose from. The customer being more
informed, dictates what to be produced, quality of the product and the price he or she is willing
to pay (Hammer and Champy, 1993). A satisfied customer may be noted by his/her repetitive
purchases and through customer satisfaction survey reports. The number of repeat purchases
would indicate the level of a customer’s loyalty to a firm (Reichheld, 2000).
This measure enables a firm to determine its probable sales, planning and decision making. A
firm uses this measure to adjust on its products and services to match its customer requirements,
increase sales hence improve organizational performance. High customer value increases market
share of a firm, attracts more investments hence overall growth of the firm. Low customer value
translates to reduced sales which may finally make an organization to collapse.
4
1.1.3 Commercial State Corporations in Kenya
The Kenyan Commercial State Corporations enable the citizens to acquire vital services that may
not be given easily by the private institutions. Commodities like water, electricity, education etc
may be well acquired through the state rather than the private institutions. Kenyan State
Corporations comprises of the Local government, Central government and the Parastatals. In
Kenya, there are about 170 state corporations, both Commercial and Non-commercial,
categorized under various ministries for efficient management. These are headed by the
respective chairpersons and executive directors charged with ensuring their efficient, effective
and successful operations (State Corporations Act Chapter 446, Laws of Kenya, Revised 2012).
For a long time the state has faced challenges in funding basic education, health and
infrastructural development to the required standard, and has had to undertake an ambitious
privatization program which has inevitably led to massive lay-off and high unemployment in an
economy in which the state and civil service was previously a major employer. The population
continues to grow with additional citizens requiring more and more services from every sector of
the economy. However, a big challenge faces the state in offering these services to its citizens.
This is because of the nature of civil service; the bureaucratic processes, public service structure,
culture, political interference, leadership and commitment of the government to reforms. This
has translated to poor services offered to the citizens. In an effort to change the face of these
corporations, some such as Kenya Airways, have settled on unfriendly strategies like
restructuring and laying off employees to reduce expenditure on high wage bills. Despite this
prevailing situation and the allegations, the government has always maintained that it is doing its
best to improve these institutions through reform programs. By this study, it would be worth
finding out whether the government’s position is genuine as the public continues to demand for
better services from these sectors (GOK Economic Recovery Strategy, 2003).
Several people find themselves flocking long queues in waiting to buy postage stamps from the
post offices, acquire title deeds from lands offices, and acquire birth certificates and national
identification cards from the national registry offices. In an attempt to make services more
accessible to the citizens, The Kenya government has created Huduma Kenya as service points
where citizens can get help for their various needs (Asman, 2013).
5
1.2 Research Problem
Implementation of Business Process Re-engineering (BPR) especially in the Commercial State
Corporations is a key factor for enhancing customer value. Commercial State Corporations have
close interaction with citizens who are the customers for whom value addition is important for
prosperity of the corporations. These corporations contribute greatly to the economic
development by offering vital services in the sectors of Transport and Infrastructure, Tourism
and Wildlife, Trade and Industry, Youth affairs, Gender, Sports and Cultural development. The
core functions of these institutions being to improve the living standards of the citizens and
promote economic development. Citizens pay taxes with the hope of receiving valuable services
from the Government through these corporations. It would therefore be worth to determine
whether the recipients of these services are contented or not (Njiru, 2008).
Institutions need to have the necessary requirements that match BPR implementation. Business
Process Re-engineering would be the best to use because of its gradual and step by step
implementation. They offer appropriate strategy for customer value creation and enhancement as
it seeks to counteract the day to day challenges of resource management in these corporations by
first determining a firm’s vision, designing the process and final implementation. The
methodologies also emphasize on organizational performance review and continuous
improvement of the processes. This is necessary for a firm’s growth and development. In order
to survive and prosper, a firm needs to undergo at least one major change almost every five
years. Business Process Re-engineering is considered a strategic tool for an organizational
change (Cackowski, 2012).
Several empirical studies have put forward fundamental principles, concepts and models in an
effort to explain Business Process Re-engineering, and their impact on organizational
performance. Studies done on BPR have focused on BPR and firm efficiency (Yuri and Federico,
2012) but not the use of BPR and organizational performance. Another study on BPR impact to
Banks and other Financial Institutions narrows down to Pakistan (Nadeem and Ahmad, 2016) but
does not widen up to the methodologies applied by the Commercial state corporations. BPR has
improved the performance of Banks in Pakistan and for other locations in different business
environments, this is yet to be confirmed. BPR methodology has enhanced Spanish university
systems and this can be applied to multiple industries. This study is politically tilted and narrows
down on Spain (Adenso-Diaz and Canteli, 2001).
6
Reengineering the open government concept (Emad, 2015), breaks down three pillars of open
government into sub dimensions of research framework, participation, collaboration,
transparency, accountability, empowerment and empirical tests as necessary for process
reengineering. However this study does not focus on BPR methodologies and organizational
performance. A study done by Andrea Gazora (2015) focuses on application of concepts and
methods on process approach towards increasing business process efficiency.
In Kenya, a study on Business Process Re-engineering implementation and organizational
performance of Kenya Revenue Authority (Odede, 2013) looks at the reform initiatives on tax
collection put in place such as the Revenue Administration Reform and Modernization Program.
It does not focus on BPR methodologies and performance of other commercial state corporations
in Kenya. Determinants of BPR success have been examined by Owino (2015). It study focuses
on thirty selected companies in Nairobi and whose respondents are solely the managers. Achieng
(2000) also looked at BPR and Financial performance of an organization, specifically Kenya
Commercial Bank. These studies are not exhaustive as they concentrate only on specific regions
and not Kenyan Commercial State Corporations. A gap that exists from these past researches
calls for a study that concentrates particularly on Business Process Re-engineering and
organizational performance of Commercial State Corporations in Kenya. Is Business Process Re-
engineering being implemented by these Kenyan Commercial State Corporations and is there
any relationship between BPR and organizational performance of Commercial State
Corporations in Kenya?
1.3 Objective of the Study
The objective of this study was therefore to;
1) To determine the extent of Business Process Re-engineering implementation by
Commercial State Corporations in Kenya.
2) To determine the relationship between Business Process Re-engineering and
organizational performance of Commercial State Corporations in Kenya.
7
1.4 Value of the Study
These study findings are expected to provide important in sight to the management of Kenyan
Commercial State Corporations in providing a well informed and the best ways and techniques to
put in place to achieve the best organizational performance amidst adoption of BPR
Methodologies. This is vital to the government considering that it mandated to take services back
to the citizen through service recovery and also reducing cost and solving myriad service failure
experienced in the past. The study stands to assist the government in knowing the problems
facing its citizens.
The finding of this study is expected to assist academicians with available information and serve
as reference points during their research. It is expected to add to the body of knowledge through
building on the field of operations as well as the strategic management and theories supporting
the study. It is entrusted to contribute to the field of operations management at large.
8
CHAPTER TWO: LITERATURE REVIEW
2.1 Introduction
This chapter documents literature review that used in the study. The specific areas to be covered
here are review of empirical studies, theories and industry organizational performance.
2.2 Theories supporting the study
Business Process Re-engineering is based on certain fundamental theories that support its
implementation for an overall achievement of an organization goals and objectives. This study
relates BPR Methodologies to the theory of constraints and theory of organizational change.
2.2.1 Theory of Constraints
Theory of Constraints identifies the most important limiting factor in achieving an organization’s
goal and improving that constraint until it is no longer the limiting factor (Goldratt, 1984). In this
regard, an organization identifies its core business processes requiring dramatic improvement
and redesigns them accordingly. The theory of constraints recognizes an organization as a system
of interlinked processes, it is the weakest link that is a constraint and needs to be improved.
Business Process Re-engineering prioritizes core business activities and addresses the constraints
in them. A Five Focusing Step approach suggests for improvement in a particular recognized
constraint to reasonable level before moving on to the next constraint. It employs a Thinking
Process that enables the implementers to find out the areas that call for change, how to make the
change and the outcome or results to expect. The results are finally measured by way of
Throughput Accounting as a guide to management decisions.
2.2.2 Theory of organizational change
Change in an organization is a process that involves series of steps (Lewin, 1995). In his Stage
Theory of Organizational Change, Kurt Lewin gives four stages undergone by an organization
through its change process. These include Awareness creation, Decision to adopt,
Implementation and Institutionalization. Implementation of BPR follows closely this theory as it
calls for identifying the core business processes, making decision to redesign and
implementation. Organizations are perceived as systems reflecting interactivity and openness to
their dynamic environment. Change happens because the environment demands change for
survival (Morgan, 1986).
9
2.2.3 Balanced Scorecard
Business Process Re-engineering also finds its roots on Balanced Scorecard, a strategic planning
and management systems approach that provides measurable perspectives in order to balance on
overall business organizational performance. The Internal Business Process Perspective and
Customer Perspective are so much interlinked that existence of one is a complete indicator of the
other. When fully deployed, the balanced scorecard provides a framework that is not only for
organizational performance measurement but also helps planners identify what should be done
and measured (Muthu et al, 2004).
2.3 Business Process Re-engineering
Business Process Re-engineering (BPR) is a Radical redesign of core business processes to
achieve dramatic improvements in cost, quality, service, speed, cycle time and overall
productivity (Magutu et al, 2010). The ultimate goal of all organizations whether private or
public is growth and development. This can only be achieved when customers are satisfied
leading to increased revenue and profitability. Organizations which are either in deep trouble,
foresee trouble or those that are aggressive and ambitious would be compelled to reengineer their
activities to achieve these goals. Implementation of BPR cuts across an organization’s processes
at various levels with the main focus of satisfying customer requirements and expectations. This
is may take various methodologies majority of which share common important features
especially in the initial stages. The most common methodologies applied towards BPR
implementation include the following:
2.3.1 Hammer and Champy methodology
Hammer and Champy methodology is based on business processes, jobs, managers and values as
the four points of business system diamond. This is done in five main phases: The first phase,
introduction involves preparing a case for action and vision statement for an organization. A case
for action describes an organization’s current situation and the need for change while a vision
statement describes the results that the firm wants to achieve. Setting a firm’s vision is one of the
main tasks of the top management. It can only be achieved through proper planning and
strategies. The second phase involves identifying the core business processes that would call for
redesign, presentation of these core processes in form of process maps for better understanding
by all the stakeholders within and outside the firm. The process maps would show the level of
interaction between the processes and the outside world. Selection is done on the processes
10
identified to be core, problematic and having high impact on customers. These must be those
processes that are likely to contribute positively to an organization’s objectives. The third phase
calls for a thorough organizational performance analysis of the selected processes for better
understanding before redesigning. A redesign phase would create completely new rules,
techniques, components or ways of carrying out the process. The final phase is implementation
and review of the reengineered process. The success of implementation relies heavily on the
preceding phases (Hammer and Champy, 2001).
2.3.2 An integrated BPR methodology by Muthu, Whitman and Cheraghi
This gives a similar approach that consolidates the key steps to implementation and continuous
improvement of the processes. The five steps begin by preparation for Reengineering by
identifying customer objectives and developing strategic purpose. It is important to involve all
the key stakeholders and inform all functional teams of the intended change. In the second step,
the existing process is mapped and analyzed as it is on the basis of time, cost and other resources.
The third step involves designing the process to be by benchmarking and performing trade-off
analysis. Benchmarking calls for comparing the organizational performance of the processes
with those of competing firms in the same industry. An implementation plan is then rolled out in
readiness for the actual transition. After successful implementation, the methodology emphasizes
on performance review of the processes and continuous improvement. This is vital in order for
any firm to survive and prosper in the dynamic business environment (Muthu et al, 2004).
2.3.3 Davenport’s and Short’s methodology
This emphasizes on Information Technology as an integral part of BPR. This methodology
introduces identification of IT levers and capabilities as its fourth step before design and
implementation. Information Technology is regarded as vital for effective communication and
efficiency in the reengineering process. The methodology recognizes that IT capabilities are
transactional, geographical, informational, analytical, sequential, managerial, trackable and parts
knowledge. Apart from IT, this methodology also recognizes the use of the traditional
management principles such as planning, organizing, supervising, directing and controlling of
activities. Davenport and Short recognizes the vital input from human resource through a firm’s
management for continuous process improvement. (Davenports, 1993).
11
2.3.4 Object Oriented Business Engineering Methodology (OO-BEM) Methodology
Jacobson et al came up with Object Oriented Business Engineering Methodology (OO-BEM)
that begins by envisioning and reversing existing business processes and engineering the new
business through forward engineering to the final installation and review of the new business
processes (Jacobson et al, 1992).
2.3.5 Process Analysis and Design Methodology (PADM)
This is an offspring of Process Modelling Cookbook is a framework of tools and techniques
featured by iterative activities for continuous improvement. The method recognizes close
relationship between technology and processes. McKinsey BPR Methodology simplifies the
process into three steps i.e. diagnostic of existing process, redesign and testing of new process
and implementation of the new process throughout the firm (McKinsey, 2000). Other
methodologies such as Accenture, Kodak, Manganeli and Klein methodologies may also be used
towards ensuring successful implementation of BPR in an organization but it is worth noting that
all follow the basic phases of defining the business vision, process selection, analysis, design,
implementation and review for continuous improvement.
The foregoing paragraph gives the reasons as to why an organization would decide to re-engineer
its processes. Where there is a substantial gap between stake-holders expectation and actual
organizational performance, an organization would find it necessary to reengineer its core
business processes such as production quality and customer care services. Quality of output may
be improved by ensuring better input materials while for customer care, this may involve hiring
professionally qualified customer care personnel with excellent skills. Organizations would be
compelled to reengineer their processes by both internal and external forces. These are
organizations that are either in deep financial crisis, just about to fall or those that are aggressive
and ambitious to prosper in business. Successful implementation of BPR leads an organization to
improve on efficiency and effectiveness of its processes, reduction in operational costs, faster
service delivery due to reduction in throughput time, higher flexibility in terms of alternatives
and high quality service. All these would result in increasing customer value hence improving
customer satisfaction. A satisfied customer would have a reason to stick to his/her supplier and
even invite others. This finally increases an organization’s sales and revenue. An organization
becomes stable, survives and prospers to realize its objectives.
12
2.4 Organizational performance
Organizational performance encompasses financial performance, product market organizational
performance and shareholder return (Richard et al, 2009). It is the actual output or result of an
organization measured against its goals and objectives. It is measured in terms of profits gross of
interest, depreciation and taxes. Several profitability ratios including Return on Investments
(ROI) and Return on total Assets are computed and are used to benchmark a firm to the entire
industry. The main reason for this measure is to help a firm realize its areas of weaknesses
towards customer satisfaction and for the firm to adjust accordingly for better organizational
performance. It acts as a control measure that is also vital in planning decisions. The balanced
scorecard is a tool that may be applied in measuring organizational performance based on its four
main perspectives: Financial, Learning and growth, Internal Business Process and Customer
perspective. This measure enables a firm to determine its probable sales, planning and decision
making. A firm uses this measure to adjust on its products and services to match its customer
requirements, increase sales hence improve organizational performance. The value that is added
by re-engineering core business processes is fundamental to most organizations in that the
specialty performs the traditional managerial functions that include planning, organizing,
directing, and controlling on the organisation's operations (Lowson, 2002).
Managerial thought is critical to processes of strategy formulation and implementation. This
requires managers to envision and prioritize future states that are appropriate and proper.
Similarly, managerial thought is critical to environmental analysis which requires managers to
forecast and make predictions. These tasks all depend on individual cognitive capabilities such as
attention, perception, reflection, and understanding. Successful process reengineering ultimately
comes down to the ability of the management and all stakeholders to create more value to firm’s
customers than the competitors. A firm’s processes are complex and interdependent. This
requires the top management to have an appropriate and effective strategy towards re-
engineering the core processes in order to be successful and remain on top of its competitors.
Operations managers and senior executives confront the problem of determining the
configuration yielding the greatest value for the end-user and each trading partner. Despite the
need to measure and align organizational performance across multiple firms, most managers
view organizational performance from an internal perspective, or at best, how it is affected by
their immediate upstream or downstream trading partners (Hunt & Phillips, 2003).
13
2.5 Empirical Literature Review
Al-Mashari and Zairi (2001) suggests that successful BPR implementation is highly dependent
on an effective BPR programme management which includes: adequate strategic alignment;
effective planning and project management techniques; Identifying organizational performance
indicators; resource capacity; using the right methodology; training, orientation and learning;
effective consultancy; effective process vision, mission and redesign; integration of BPR with
other improvement techniques and last but not least, identification of value of BPR.
Implementation of Business Process Re-engineering methodologies calls for incorporation of
Information and communication technology (ICT). This is necessary since the two go together.
Implementation of BPR methodologies has the objective towards quantum leaps in
organizational performance measures all through to the six sigma. BPR methodologies focus on
attaining overall customer satisfaction. It calls for an organization to completely abandon its old
ways of operations and adapt to new ways of thinking for improved organizational performance.
Undertaking Business Process Reengineering has a framework that include Organizing work
around outcomes not tasks, multiple versions of the same processes should be created,
compensation shifts from activity to results, structure diminishes in importance, abandon
outdated rules and assumptions, reduce checks and controls, staff changes from controlled to
empowered, managers must have strong interpersonal skills, managers must move closer to real
work, employees have to be multi-skilled, managers’ role changes from supervisor to coach and
outsourcing of non-core activities (Zairi, 1995).
Business Process Re-engineering is done in levels. The first level of BPR is concerned with
localized exploitation of information technology (IT) within an organization’s functions. It
involves development of applications meant to improve efficiency in operations. The top
management recognizes the need for change, develops an understanding of what is BPR, and
how they plan to achieve the change. The second level is a logical extension of the first level.
This is because the potential of IT within activities that occurred in the organization’s processes,
is reflected on both efficiency and effectiveness of these processes. A clear vision is created. It is
the responsibility of the top management to find out and select the core business processes that
call for re-engineering based on the vision of the organization. The management defines clear,
measurable objectives and forms the re-engineering project team to carry out the task in their
close supervision. At the third level, Business Process Re-design which exploits Information
14
Technology fully. This level reflects an active, planned and conscious effort towards aligning the
processes of an organization with Information Technology. Evaluation and documentation of the
current processes is done with the intention of uncovering bottlenecks, and establishing
benchmarks to use for continuous improvement. At level four, business network re-designs
incorporates Information Technology to redesign the network of exchange existing between the
firms processes. It involves actual transformation to the reinvented process or organization which
takes place as a pilot study. The fifth phase constitutes full implementation and integration of the
re-engineered processes into the organization. The final phase of the model involves evaluating
the success of the re-engineering efforts against the organizational performance objectives
established in phase two. Hence should the re-engineering efforts not achieve the desired goals, it
should be redesigned and modified accordingly (Alavi and Yoo, 1995).
2.6 Conceptual Framework
Business Process Re-engineering implementation calls for a practical framework as a guideline
to the management. The BPR methodologies discussed in this study have a common series of
steps in the six main phases that include understanding, initiating, programming, transformation,
implementation and review for continuous improvement. The final output of the processes
should be an overall improvement in performance. This may be depicted as shown below.
Fig: 2.1 Conceptual Framework
Independent variable
Dependent variable
Return on Investment (ROI)
Return on Assets (ROA)
Market share
Profits
Liquidity Ratio
Operational Efficiency
Hammer and Champy methodology
An integrated BPR methodology by Muthu,
Whitman and Cheraghi
Davenport’s and Short’s methodology
Object Oriented Business Engineering Methodology
(OO-BEM) Methodology
Process Analysis and Design Method (PADM)
Methodology
Other Methodologies
15
CHAPTER THREE: RESEARCH METHODOLOGY
3.1 Introduction
This chapter introduces the methodologies that were used in the study towards determining
Business Process Re-engineering Methodologies and Organizational performance of commercial
state corporations in Kenya. The methodology focused on the research design, data collection,
population, sampling, data analysis techniques and presentation methods to be used in the study.
3.2 Research Design
The study used descriptive design, a method that describes variables by first collecting
appropriate data, tabulating this data and deriving frequencies and determining any existing
correlation (Ngechu, 2004). Descriptive design is cross sectional as per the selected sample and
deviates from random sampling. It is more standardized and allows for easy comparison of data
for effective research decision making. It was found to be the most suitable to use considering
the quantitative and qualitative nature of the variables in this study i.e. Business Process Re-
engineering and Organizational performance at Commercial State Corporations in Kenya.
3.3 Population
Population refers to all individuals in an area of study from which a researcher generalizes
his/her result (Mugenda and Mugenda, 2003). In Kenya, there are over 170 state owned
corporations both commercial and non-commercial. These fall into categories of Banks and other
Financial Institutions, Development Authorities and Corporations, Research, Regulatory,
Processing and Training. This study will focus only on the commercial state corporations in
Kenya which are twenty four (Performance Evaluation Report, 2010/2011). A census was
therefore used as the appropriate method of study. Census calls for complete enumeration of the
entire population of study. It is more intensive and results in higher degree of accuracy
(Mugenda and Mugenda, 2003).
3.4 Data Collection
This study incorporated both primary data and secondary data. Collection of primary data was
done by use of questionnaires and physically visiting the collection points for face to face
interaction with open ended questions. The researcher personally handed in the questionnaires to
the respondents at their various institutions and some were transmitted electronically to those far
away institutions which were not reachable within the time frame of this study. The target
16
respondents were the Managers. The questionnaire was found to be the most suitable for
collecting primary data and was formatted to agree with the topic of the study to gather responses
from the intended respondents. Secondary data comprised of those from the internet, journals
and other published documented sources such as economic surveys.
3.5 Data Analysis and Presentation
The data collected was cleaned, coded and edited for errors, consistency and completeness. The
incorporated descriptive statistics in finding measures of means and standard deviation of the
inferences. Statistical Program for the Social Sciences (SPSS) was used as a tool for data
analysis. The frequencies of occurrences reflect the extent of Business Process Re-engineering
implementation by the Commercial State Corporations in Kenya. This helped in summarizing
and analyzing the data gathered thus enabling the researcher to obtain underlying features of
Commercial State Corporations. The Pearson’s correlation was used to find out the relationship
between BPR Methodologies and organizational performance of Commercial State Corporations
in Kenya. The final results have been presented in both statistical tables and diagrams for better
understanding and decision making.
17
CHAPETR FOUR: DATA ANALYSIS, INTERPRETATION AND PRESENTATION
4.1 Introduction
This chapter outlines data analysis, presentation of the finding and interpretation of result. In
order to simplify the discussion of the findings, the researcher presented tables and figures that
summarize the collective reactions and views from the respondents. The chapter is organized as
follows; first it looked at the rate of response and demographic analysis, followed by analysis of
various BPR Methodologies and finally the relationship between BPR Methodologies and
organizational performance of commercial state corporations in Kenya.
4.2 The Response Rate
The unit of analysis was 24 Commercial State Corporation. Out of the 24 questionnaires sent to
the Corporations, 21 were fully marked and returned showing 88% response rate. According to
Kothari (2008), a response of 70% and above is good for data generalization. This means that the
response for this study was excellent and therefore adequate for data analysis and interpretation.
4.3 Reliability Analysis
The pilot study was conducted to pretest and ascertain the legitimacy and reliability of the data
collection instrument, the 2 questionnaires before the main study. These 2 questionnaires were
later on included to add to the number of the unit. The reliability of the questionnaires was
established using Cronbach's alpha value and the results are as shown in table 4.1. The result
tabled gives an analysis of the outcome where the Cronbach's Alpha values were averaged to
0.71 to reflect the scale. This is up-scaled as acceptable according to George and Mallery,
(2003). It is also closer to 1.0 denoting greater internal consistency of the elements under
consideration.
Table 4.1: Reliability Coefficients
Scale Cronbach's Alpha No. of Items
Hammer and Champy 0.57 21
Integrated BPR Methodology 0.69 21
Davenport’s and Short’s 0.80 21
OO-BEM 0.67 21
PADM 0.81 21
The finding shows that the instrument constantly gave far above the ground results and the
scores averaging to 0.7100 accepted as good and highly within the required Cronbach’s alpha
coefficient of over 0.7 which give an assurance of an instrument’s consistency and dependability.
18
Nachmias and Nachmias, (2006); Kothari, (2008) and Sekaran, (2006) note that a research
instrument that has a comparatively high internal regularity with reliability coefficient of 0.7100
or higher is well thought-out as acceptable in most social science research scenarios.
4.4 Demographic Characteristics
The demographic characteristics of the Commercial State Corporation were analyzed and
obtained in the form of tables showing their frequency along with cumulative percentages. The
demographic characteristics included Industries, Position, and Experience. Table 4.2 shows
results of the demographic findings. The industry, position and work experience were important
indicators for the study as they helped in understanding the dynamics of the commercial state
corporation in adopting the most appropriate BPR so as to improve business performance.
Table 4.2: Commercial State Corporation
Characteristic Frequency Percent
Industry
Banking 4 19.0
Trade 2 9.5
Publishing 1 4.8
Transport 2 9.5
Media 1 4.8
Energy 3 14.3
Estate 1 4.8
Food 2 9.5
Finance 1 4.8
Agriculture 1 4.8
Tourism 1 4.8
Housing 1 4.8
Info and Comm. 1 4.8
Total 21 100
Respondent’s Position
Operations Manager 1 4.8
General Manager 2 9.5
Supervisor 9 42.9
Other 9 42.9
Total 21 100
Years of Work Experience
Less than 5 years 1 4.8
5-10 years 13 61.9
11-20 years 5 23.8
Above 20 years 2 9.5
Total 21 100
19
The finding in Table 4.2 indicates the various industries in which the research study was based
with Banking forming (19.0%), Energy (14.3%), Food, Transport and Trade (9.5%) while the
rest; Publishing, Media, Estate, Finance, Agriculture, Tourism, Housing, Info & Comm. form
(4.8%). The results indicate that the industry is majorly populated by banks, followed by
Energy, Food and Trade and the rest follow among the commercial state corporation therefore
they give a proper understand the cross cuttings and how the BPR methodologies are used in
order to have competitive advantage.
Study findings shows that the respondents were the operations managers (4.8%), general
managers (9.5%), supervisors (42.9%) and other (42.9%). The respondents were therefore from
same management levels and all were related to management of the organization. This implies
that they have a clear picture of the effect of BPR on the organizational performance of their
respective commercial state corporation.
The study further sought after establishing the period of continuous service to the commercial
state corporation as a respondent basing on worked experience. The result in table 4.2 indicates
that 4.8% of the respondents have been working in the commercial state corporation for a period
below 5 years and 61.9% of the respondents have worked between 5-10 years. The 23.8% of the
respondents indicated their duration of service is between 11-20 years and 9.5% indicated that
their duration of service is more than 20 years. This shows that majority of the respondent have
worked at their respective commercial state corporation for a period of 5-10 years and have
enough understanding of their organization’s working and operations.
4.5 The Extent of Business Process Re-engineering (BPR) Implementation
The first objective was to determine the extent of Business Process Re-engineering
implementation by Commercial State Corporations in Kenya. The respondents’ feedback on the
extent to which BPR affect organizational performance have been analyzed and presented in
tables illustrating their respective means and standard deviations. The major focus was on the
BPR Methodologies; Hammer and Champy, Integrated BPR Methodology, Davenport’s and
Short’s, OO-BEM and PADM
4.5.1 Hammer and Champy BPR Methodology
Table 4.3 presents the frequency distribution of respondents’ opinion on the extent to which
Hammer and Champy BPR Methodology has contributed to the organizational performance of
the commercial state corporation.
20
Table 4.1: Hammer and Champy BPR Methodology
Hammer and Champy BPR Methodology Mean Std. Deviation
State Corporation has vision statement on business
process Improvement. 4.76 .436
Commercial state Corporation does select core
business process that has impact on customers. 4.00 .316
State Corporation does thorough performance
analysis. 3.76 .625
Commercial state corporation do implement, monitor
and evaluate processes. 4.10 .436
The result in Table 4.3 shows that Hammer and Champy methodology influence organizational
performance, it is depicted by vision statement and the implementation (mean=4.76), it shows
how the Commercial state Corporation do select core business process that has high impact on
customers (mean=4.00), it reveals how State Corporation does thorough performance analysis of
BPR Methodology (mean=3.76) and Commercial state corporation do implement, monitor and
evaluate processes (mean=4.10), this is supported by (Hammer and Champy, 2001)
methodology that is based on business processes, jobs, managers and values as the four points of
business system diamond. This is done in phases; action and vision statement for an organization
down to implementation.
4.5.2 Integrated BPR Methodology
The determinants and elements of Integrated BPR Methodology in Table 4.4 presents the
frequency distribution of respondents’ opinion on the extent to which Integrated BPR
Methodology has contributed towards performance of commercial state corporation.
Table 4.4: Integrated BPR Methodology
Integrated BPR Methodology Mean Std. Deviation
The firm identifies customer requirements and
develops a strategic purpose 4.38 .498
State Corporation maps and Analyze existing
process 3.86 .655
The firm design and benchmarks with the other
industry players 3.81 .512
The firm do roll out process implementation 4.00 .447
The corporation implements new processes and
conduct performance review 4.19 .512
21
The results in Table 4.4 indicates that most state commercial corporations in their respective
industries adopts Integrated BPR Methodology which requires that the firm identifies customer
requirements and develops a strategic purpose (mean = 4.38); State Corporation maps and
Analyze existing process (mean = 3.86), the firm design and benchmarks with the other industry
best players (mean = 3.81), The firm do roll out on process implementation (mean = 4.00) The
corporation implements new processes and conduct performance review (mean = 4.19). From the
results, Integrated BPR Methodology has enabled business performance among the corporations,
through Benchmarking that calls for comparing the organizational performance of the processes
with those of competing firms in the same industry. An implementation plan is then rolled out in
readiness for the actual transition. After successful implementation, the methodology emphasizes
on performance review of the processes and continuous improvement. This is vital in order for
any firm to survive and prosper in the dynamic business environment (Muthu et al, 2004).
4.5.3 Davenport’s and Short’s BPR Methodology
Table 4.5 denotes the frequency distribution of respondents showing their opinion as to what
extent does Davenport’s and Short’s BPR Methodology contributes towards organizational
performance of the commercial state corporation in Kenya.
Table 4.5: Davenport’s and Short’s BPR Methodology
Davenport’s and Short’s BPR Methodology Mean Std. Deviation
The state corporation has a vision statement for
business process improvement 4.38 .498
The firm do carry out performance analysis on
existing processes 3.86 .655
The firm identifies ICT capabilities that is vital
for BPR 3.81 .512
The firm designs process and roll out
implementation plan based on key principles 4.00 .447
The corporation implements new processes and
carry out performance audit 4.19 .512
22
The result in table 4.5 shows that Davenport’s and Short’s BPR Methodology has enable the
commercial state corporation to attain the technological prowess by; aligning the firm’s ICT
processes with the vision statement for business process improvement (mean=4.38), the firm do
carry out system audit on existing processes for better performance (mean=3.86), The firm
designs process and roll out implementation plan based on key principles, The firm is able to
identify ICT capabilities that is vital for BPR (mean=4.00) and The corporation implements new
processes and carry out performance audit for better business performance (mean=4.19) this
concurs with the views of (Davenports, 1993) who assert that, this methodology introduces
identification of IT levers and capabilities as its fourth step before design and implementation.
Information Technology is regarded as vital for effective communication and efficiency in the
reengineering process. The methodology recognizes that IT capabilities are transactional,
geographical, informational, analytical, sequential, managerial, and traceable and parts
knowledge.
4.5.4 OO-BEM BPR Methodology
Object Oriented Business Engineering Methodology (OO-BEM) begins by envisioning and
reversing existing business processes and engineering the new business. Table 4.6 denotes results
of the findings from the respondents on their views and level of agreement basing on various
aspects of OO-BEM BPR Methodology used by various corporations to achieve business
performance,
Table 4.6: OO-BEM BPR Methodology
OO-BEM BPR Methodology Mean Std. Deviation
Our firm has clear vision, mission and corporate
objective for successful performance 4.52 .512
The firm does reverse reengineering by
identifying failures in the processes 3.62 .498
The corporation does forward reengineering
through selection of processes and redesign
processes for better performance
3.62 .740
The firm carries out pilot study to test run the
processes 3.67 .658
The corporation implements new processes and
conduct performance review for improvement 4.14 .359
23
The results in Table 4.6 shows that OO-BEM BPR Methodology increases organizational
performance through setting out clear vision, mission and corporate objectives for successful
performance (mean = 4.52), The firm does reverse reengineering by identifying failures in the
processes so as to increase performance (mean = 3.62), Through forward reengineering and
selection of processes, the firm redesign processes to improve performance (mean = 3.62), in
carrying out pilot study to test run the processes countrywide, the firm increases performance
(mean = 3.67) and enhances ROI through implementing of new processes (mean = 4.14).
4.5.5 PADM BPR Methodology
Table 4.7 presents the frequency distribution of respondents’ opinion on the extent to which
PADM BPR Methodology has contributed to the organizational performance of the commercial
state corporation.
Table 4.7: PADM BPR Methodology
PADM BPR Methodology Mean Std. Deviation
The state corporation has a vision statement for
business process improvement. 4.52 .512
Commercial state Corporation does select core
business process that has impact on customers. 4.00 .548
The firm incorporates IT as part of analysis and
design processes to be reengineered 3.67 .577
The corporation implement new processes by
creating new operating rules and techniques 3.95 .498
The corporation does performance review
interactively to continuous improvement 3.95 .218
The result in Table 4.7 shows how PADM BPR Methodology influences organizational
performance, it is depicted by vision statement and the implementation (mean=4.52), it shows
that the Commercial state Corporation do select core business process that has high impact on
customers (mean=4.00), it reveals high return when the corporation incorporates IT as part of its
analysis and design processes (mean=3.67), there is high performance when the corporation
implements new processes by creating new operating rules and techniques(mean=3.95) and
Commercial state corporation do implement, monitor and evaluate processes and the corporation
do perform at optimum when it does performance review interactively (mean=3.95). This is
24
supported by McKinsey BPR Methodology simplifies the process into three steps i.e. diagnostic
of existing process, redesign and testing of new process and implementation of the new process
throughout the firm (McKinsey, 2000). On the extent to which Business Process Re-engineering
implementation is adopted by the Commercial State Corporations in Kenya, the finding shows
that Hammer and Champy tops the list with Mean=4.16, both Davenport’s and Short’s &
Integrated BPR Methodology (Mean=4.05), PADM (Mean=4.02) and finally OO-BEM with
Mean=3.91.
4.6 Inferential Statistics Analysis on Relationship
The data obtained from summarizing the responses obtained from the research questions were
further analyzed by use of Pearson’s correlation model. The findings are summarized to showing
the relationship between Business Process Re-engineering and organizational performance of
Commercial State Corporations in Kenya as follows.
4.6.1 Correlation of Main Variables
The Pearson Correlation analysis was conducted at 95% confidence level (α = 0.05) to find out
the correlation between the variable under study. The statistical analysis was done using
summated scales for both the BPR Methodologies and organizational performance as variables.
The results in table 4.8, shows that the correlation coefficients denoting the relationships
between the variables (Independent and dependent) are above 0.4 and below 0.8 (Pearson, 1990).
This shows that the strength of the correlations is medium to strong. The highest correlation
coefficient was at 0.740 which is less than 0.8; therefore there is no multi-collinearity problem in
this study.
Table 4.8: Pearson Correlation Analysis
BPR Methodology Organizational Performance
Hammer and Champy Pearson Correlation 0.46
Sig. (2-tailed) 0.04
Integrated BPR Methodology Pearson Correlation 0.41
Sig. (2-tailed) 0.06
Davenport’s and Short’s Pearson Correlation 0.73
Sig. (2-tailed) 0.00
OO-BEM
Pearson Correlation 0.56
Sig. (2-tailed) 0.03
PADM Pearson Correlation 0.74
Sig. (2-tailed) 0.00
25
The outcome in table 4.8 shows that all the independent variables that is; (Hammer and Champy,
Integrated BPR Methodology, Davenport’s and Short’s, OO-BEM and PADM) have a strong
positive correlation on the dependent variable (organization performance). PADM had the
strongest correlation on organization performance with (r = 0.758, and p< 0.05) while Integrated
BPR Methodology had the weak correlation to organizational performance with a correlation of
(r = 0.410, p< 0.05) meaning that if PADM tops the BPR Methodology and is aligned in tune
with the industry performance, it can account for increase in ROI, Profitability, Liquidity, Debt
to Asset Ratio and Market Share modeled with dynamic technological innovations to leverage on
performance. The finding further shows that all the variables were significant at 95% level of
confidence at an interval level of 2-tailed. This shows that all the forecasted variables under
contemplation had a positive relationship with the dependent variable hence firms need to
emphasize on the BPR Methodologies to enhance organizational performance.
26
CHAPTER FIVE: SUMMARY, CONCLUSION AND RECOMMENDATION
5.1 Introduction
This chapter presents the final piece of the study. This chapter articulates the summarized
findings from chapter four and relates them to the concepts and literature discussed in chapter
two. It then highlights the conclusions based on specific research questions and the
recommendations made thereof in the line of inferential outcome. It finally exudes the
suggestions for further research beyond the variable and elements under consideration.
5.2 Summary of the findings
The study investigated the Business Process Re-engineering implementation and how it
influence Commercial State Corporations in Kenya. The study was informed by two research
questions, namely; to what extent does BPR Methodologies affect Organizational performance.
It also looked into the relationship between Business Process Re-engineering and organizational
performance of Commercial State Corporations in Kenya The study adopted a descriptive
research design. The unit of analysis was the 24 commercial state corporations in Kenya based
on the report from the registrar of companies (2015) and gazette State Corporation, it adopted a
census and the entire population was considered for analysis. The respondents were the
management of various commercial state corporations who were given the questionnaires
provided overwhelming response.
The response rate for the study was 86%. The quantitative data was analyzed using descriptive
statistics, Pearson correlation model was used to find the relationships. The data was organized
according to the research objectives and presented using tables. The following are the summary
of the key findings. The PADM BPR Methodology influenced organizational performance, it
depicts by vision statement and the implementation, it further shows that the Commercial state
Corporation do select core business process that has high impact on customers, it reveals high
return when the corporation incorporates IT as part of analysis and design processes, there is also
high performance when the corporation implements new processes by creating new operating
rules and techniques and finally, the Commercial state corporation do implement, monitor and
evaluate processes as well as perform at optimum when it does performance review interactively.
27
The Davenport’s and Short’s BPR Methodology has enabled the commercial state corporation to
engage their technological prowess by aligning the firm’s ICT processes with the vision
statement for business process improvement, the firm is also able carry out system audit on
existing processes for better performance, The firm designs process and roll out implementation
plan based on key principles, The firm is able to identify ICT capabilities that is vital for BPR
and finally the corporation implements new processes and carry out performance audit for better
business performance this is supported by (Davenports, 1993) who assert that This methodology
introduces identification of IT levers and capabilities as its fourth step before design and
implementation. Information Technology is regarded as vital for effective communication and
efficiency in the reengineering process. The methodology recognizes that IT capabilities are
transactional, geographical, informational, analytical, sequential, managerial, and traceable and
parts knowledge.
The OO-BEM BPR Methodology has increased organizational performance through setting out
clear vision, mission and corporate objectives for successful performance; the firms often do
reverse reengineering by identifying failures in the processes so as to increase performance,
through forward reengineering and selection of processes, the firm redesign processes to improve
performance. In carrying out pilot study to test run the processes countrywide, the firm increases
performance and hence enhanced ROI through implementing of new processes and by
conducting performance review.
The Hammer and Champy methodology influence organizational performance, it is depicted by
vision statement and the implementation, it shows how the Commercial state Corporation do
select core business process that has high impact on customers, it reveals how State Corporation
does thorough performance analysis of BPR Methodology and finally, Commercial state
corporation do implement, monitor and evaluate processes, this is supported by Hammer and
Champy methodology that bases the business processes on; jobs, managers and values as the
four points of business system diamond. This is done in phases; action and vision statement for
an organization down to implementation (Hammer and Champy, 2001).
Finally, the Integrated BPR Methodology has enabled business performance among the
corporations through Benchmarking that calls for comparing the organizational performance of
the processes with those of competing firms in the same industry. A corporation is then able to
implement plans then roll it out in readiness for the actual transition. After successful
28
implementation, the methodology emphasizes on performance review of the processes and
continuous improvement. This is supported by (Muthu et al, 2004), who opined that an
implementation plan is then rolled out in readiness for the actual transition. After successful
implementation, the methodology emphasizes on performance review of the processes and
continuous improvement. This is vital in order for any firm to survive and prosper in the
dynamic business environment.
The result shows that BPR has significant effects on organizational performance with a strong
positive significance. PADM BPR Methodology, Davenport’s & Short’s BPR Methodology, OO-
BEM BPR Methodology, Hammer and Champy BPR Methodology and finally Integrated BPR
Methodology which form the core a building BPR Methodologies. It shows that commercial state
corporations in Kenya use BPR Methodologies at different wavelength in order to boost their
organizational performance and this is evidenced on the findings. The BPR Methodologies
collectively account for 70.5% of change in performance of the commercial state corporations in
Kenya. The other remaining percentage of 29.5%, being accounted for by other factors not
considered in this study. It is eminent that further research should be conducted to probe the other
factors that account for the remaining (29.5%) that seems to affect organizational performance of
commercial state corporations in Kenya.
The BPR Methodologies (PADM BPR Methodology, Davenport’s & Short’s BPR Methodology,
OO-BEM BPR Methodology, Hammer and Champy BPR Methodology and Integrated BPR
Methodology) have a strong positive correlation on the dependent variable (organization
performance). PADM had the strongest correlation on organization performance with (r = 0.758,
and p< 0.05) while Integrated BPR Methodology had the weak correlation to organizational
performance with a correlation of (r = 0.410, p< 0.05) meaning that if PADM tops the BPR
Methodology and is aligned in tune with the industry performance, it can account for increase in
ROI, Profitability, Liquidity, Debt to Asset Ratio and Market Share modeled with dynamic
technological innovations to leverage on performance. The finding further shows that all the
variables were significant at 95% level of confidence at an interval level of 2-tailed. This shows
that all the forecasted variables under contemplation had a positive relationship with the
dependent variable hence firms need to emphasize on the BPR Methodologies to enhance
organizational performance.
29
5.3 Conclusion
Business Process Re-engineering (BPR) is a Radical re-designs of core business processes to
achieve dramatic improvements in cost, quality, service, speed, cycle time and overall
productivity. It is a process that cuts across an organization’s various levels with the main focus
on satisfying customer requirements and expectations. It calls for an organization to completely
abandon its old ways of operations and adapt to new ways of thinking for improved
organizational performance. (Hammer and Champy, 2001).
The most common methodologies applied towards BPR implementation include the following:
Hammer and Champy methodology based on business processes, jobs, managers and values as
the four points of business system diamond. Davenport’s and Short’s methodology emphasizes
on Information Technology as an integral part of BPR. Object Oriented Business Engineering
Methodology (OO-BEM) by Jacobson that begins by envisioning and reverse engineering to
forward engineering. A fourth methodology, the Process Analysis and Design Method (PADM)
features a framework of tools and techniques for iterative activities. All these methodologies
follow the basic phases of defining the business vision, process selection, analysis, design,
implementation and review for continuous improvement. An integrated BPR methodology by
Muthu, Whitman and Cheraghi, gives a similar approach and consolidates the key steps in BPR.
The study found out that most Commercial state corporations in Kenya have adopted BPR Model
at different wave length in order to increase their organizational performance. These range from
PADM BPR Methodology, Davenport’s & Short’s BPR Methodology, OO-BEM BPR
Methodology, Hammer and Champy BPR Methodology and Integrated BPR Methodology with
each having positive significance on ROI, Market Share, Profitability, Debt and Liquidity Ratio
and equally on organizational performance as a whole. In conclusion, there is a strong positive
relationship between BPR Methodology and organizational performance of the commercial state
corporations in Kenya therefore the corporations need to fully carry out market analysis so as to
understand the media market, develop and implement BPR Models that embraces the crop of
methodology that fit into a given industry for competitive advantage hence achieving
organizational performance
30
5.4 Limitations of the Study
The study focused and delved on one respondent from each commercial state corporation, this
put probable limitation in terms of generalizing the results to substantiate those other firms or
departments in contexts. The whole selection was skewed towards the generalization of results to
the overall population. The narrowness and specificity of this study means that the results were
based only on the commercial state corporations which may not be of much help to other sectors
in terms of national and international contexts.
5.5 Recommendation
The study found out that BPR Methodology tremendously affects organizational performance
and that there is a strong positive relationship between BPR Methodology and organizational
performance. These put in to perspective the (BPR) models namely; PADM BPR Methodology,
Davenport’s & Short’s BPR Methodology, OO-BEM BPR Methodology, Hammer and Champy
BPR Methodology and Integrated BPR Methodology. The commercial state corporation should
intensify their style of research and development thereby adopting the best fit of a model that are
realistic and time bound to increase organizational performance but with caution to ensure that
control and sobriety is observed within industry so as not to exploit the consumers in the name of
wanting to maintain surplus or achieve ROI. There are a lot of old and dying commercial state
corporations that are struggling financially as it has been evidenced, the best BPR model basing
on the finding of the study is therefore recommended for implemented to save the state
resources.
The BPR is a tool towards organizational prowess as indicated in the findings. Besides, from
qualitative data gathered it showed that different commercial state corporation have often used
the wrong tactics in the hope of beating competition but the result has always been negative,
therefore there is a sense in which the (BPR) models namely; PADM BPR Methodology,
Davenport’s & Short’s BPR Methodology, OO-BEM BPR Methodology, Hammer and Champy
BPR Methodology and Integrated BPR Methodology should be implemented to improve
organizational performance. The study findings call for the government to adopt BPR
methodologies so as to bring strategic changes in the commercial state corporation. It also invite
academicians recast strategically on the methodologies and their rightful applicability in order to
contribute to the line of operations management.
31
5.6 Suggestions for further Research
The objectives mainly focused on the variables under study, they tried to successfully delve and
accomplished the intended purpose but these were only skewed to the extent and relationship that
existed between the variables. Several areas that were not covered remained unclear and these
require further research;
First, data was collected and were limited to only 24 commercial state corporations in Kenya.
The study further proposed that further research should be carried out to not only look into the
limited commercial state corporation but also other organizations at a broader spectra that uses
BPR Methodology to enhance their performance and which might have been left out during the
study due to scope
Second, since data collection was only limited to the use of semi-structured questionnaires,
observations and interviews as the main tools, more advanced data collection methods are
therefore recommended for future research namely, comparative research, case study and sample
study
There is a dire need to do more research on other factors that affect organizational performance
which could be used alongside BPR Methodologies that might contribute to ROI, Profitability,
Market Share and Liquidity ratio in the commercial state corporations in Kenya.
32
REFERENCES
Adenso-Díaz, B. and Cantelli, A.F. (2001). Business process reengineering and university
organisation: a normative approach from the Spanish case. Journal of Higher Education
Policy and Management
Alavi, M. and Yoo, Y. (1995), “Productivity Gains of BPR: Achieving Success where others
have Failed”, Information Systems Management.
Al-Mashari, M., Zahir, I., and Zairi, M. (2001), "Business Process Reengineering: A Survey
of International Experience." Business Process Management Journal, December
2001,pp. 437-455.
Asman Rakki, (2013), ‘Diversification Strategy and Organizational performance of Kenyan
Commercial State-owned Corporations’ A Research Project at the University of Nairobi
Cackowski, David (2012), Object analysis in organizational design: A solution for matrix
organizations; Project Management Journal
Chase, et al., (2004), Operations Management for Competitive Advantage, 10th
Edition. New
Delhi. Tata McGraw-Hill Publishing Company Limited.
Davenport, T. (1993a), “Need Radical Innovation and Continuous Improvement? Integrate
Process Reengineering and TQM”, Planning Review.
Davenport, T. (1993b), Process Innovation: Reengineering Work Through Information
Technology, Ernst & Young, New York, NY.
E. Njiru, (2008), “The Role of State Corporations in a Developmental State: The Kenyan
Experience” African Association for Public Administration and Management
Goldratt, E. (1984). Theory of Constraints. [Great Barrington, MA]: North River Press
Government of Kenya (2003) Economic Recovery Strategy for Wealth and Employment
Creation Government Press
Hammer, M. and Champy, J. (1993), Reengineering the Corporation, Harper Business,
NewYork, NY.
Jacobson, I. M., Christerson, P. Jonsson, and G. Overgaard. 1992. Object-Oriented Software
Engineering: A Use-Case Driven Approach. Reading, MA: Addison-Wesley.
Johnson, G., Scholes, K., Whittington, R., (2008), Exploring Corporate Strategy, Texts and
Cases, Seventh Enhanced Media Edition, Prentice Hall Inc.
Krishna Chaithanya (2014), Business Process Re-engineering for Retail Banks, A study at the
Institute for Development and Research in Banking Technology (IDRBT)
Lewin, K. (1995), Resolving Social Conflicts, Group Dynamics, New York: Harper and Row
33
Lowson, R.H. (2002), Strategic Operations Management: The New Competitive Advantage,
Routledge, London (in production).
Magutu, P. O. et al (2010), “Business Process Reengineering for Competitive Advantage”,
African Journal of Business & Management (AJBUMA).
Mugenda O.M. & Mugenda, A.G. (2003), Research Methods: Quantitative and Qualitative
approach, Nairobi: Act press.
Mckinsey (2013), Strategic Management Insight –McKinsey 7S Model
Morgan, R. M., & Hunt, S. D. (1994). The commitment–trust theory of relationship marketing.
Journal of Marketing,
Muthu, S., L. Whitman, and S.H. Cheraghi, (2004), “Business Process Reengineering:
A Consolidated Methodology.”
Nadeem M, Ahmad R (2016) Impact of Business Process Reengineering on the Performance of
Banks in Pakistan.
Ngechu M (2004): Understanding the Research Process and Methods: An introduction to
Research Methods, Nairobi.
Odede (2013) “Business Process Re-engineering Implementation and Organizational
performance: The case of Kenya Revenue Authority” A Research Project, UoN
Reichheld, F. F., & Schefter, P. (2000). E-loyalty: Your secret weapon on the Web. Harvard
Business Review,
Richard, P. et al. (2009). Measuring Organizational Performance: Towards Methodological Best
Practice. Journal of Management. Sydney: Sage Publications.
Sekaran U, Marilyn K. Pelosi, Theresa M. Sandifer, (2000). Research and Evaluation for
Business. Pennsylvania: John Wiley & Sons
Thomas-Hunt, M. C., & Phillips, K. W. (2003). Managing teams in the dynamic organization:
The effects of revolving membership and changing task demands on expertise and status.
Zairi, M. and Sinclair, D (1995). Business process reengineering and process management:
A survey of current practice and future trends in integrated management.
State Corporations Act Chapter 446, Laws of Kenya (2012)
Performance Evaluation Report Year 2010/2011
34
APPENDICES
APPENDIX I: Letter of Introduction
George Ouma Ogada
University of Nairobi
P.O. Box 30197 – 00100
Nairobi
October, 2017
To whom it may concern,
RE: REQUEST TO CARRY OUT A RESEARCH STUDY
I am a student at the University of Nairobi Main Campus taking Masters in Business
Administration degree course. My specialization is Operations Management and I am carrying
out a research study on Business Process Re-engineering and Organizational performance of
Commercial State Corporations in Kenya.
The study requires me to collect data for analysis in order to make reliable conclusion. As one of
my preferred participants, I am kindly requesting for your input by going through the attached
questionnaire and answering the questions to your level best. Kindly be assured that the
information you give will only be used for academic purposes and will be treated with utmost
confidentiality.
Thank you in advance for taking your time towards making this study successful.
Yours sincerely,
George Ouma Ogada
35
APPENDIX II: Questionnaire
Part A: Background information
1. Kindly state the name of your organization: ___________________________________
2. In which industry is your organization: _______________________________________
3. What is your current position?
Chief Executive Officer
Operations Manager
General Manager
Supervisor
Other (Please specify) ____________________________________________
4. For how long have you been working in this organization?
Less than 5 years
5 – 10 years
11 – 20 years
Above 20 years
Part B: Business Process Re-engineering implementation
Kindly select on a scale of 1 – 5 where: 5 - Very Strong, 4 – Strong, 3 - Moderate,
2 - Weak and 1 – None
5. To what extent has your state corporation implemented the following aspects of
Hammer and Champy BPR Methodology?
Use of Hammer and Champy BPR Methodology 1 2 3 4 5
The state corporation has a vision statement on business
process improvement
Our firm do select core business processes having high
impact on customers
The corporate does thorough performance analysis of the
selected processes for BPR
Our organization do implement, monitor and evaluate the
re-engineered processes against the objectives for
continuous improvement
36
Kindly select on a scale of 1 – 5 where: 5 - Very Strong, 4 – Strong, 3 - Moderate,
2 - Weak and 1 – None
6. To what extent has your state corporation implemented the following aspects of An
Integrated BPR Methodology?
Use of An Integrated BPR Methodology 1 2 3 4 5
The firm identifies customer objectives and develops
strategic purpose involving all stakeholders
The state corporation maps and analyzes existing process to
establish the constraints and bottlenecks
The firm designs the process to be and benchmarks it to the
whole industry
The firm management do roll out process implementation as
per developed plan
The state corporation implements the new process and does
performance review for continuous improvement
7. To what extent has your state corporation implemented the following aspects of
Davenport’s and Short’s BPR Methodology?
Use of Davenport’s and Short’s BPR Methodology 1 2 3 4 5
The state corporation has a vision statement on business
process improvement
The firm do carry out performance analysis on existing
processes and selects core business processes having high
impact on customers
The firm identifies and recognizes the IT levers and
capabilities as vital elements for BPR process
The firm designs process to be and rolls out implementation
plan based on key management principles
The state corporation implements the new process and does
performance review for continuous improvement
37
Kindly select on a scale of 1 – 5 where: 5 - Very Strong, 4 – Strong, 3 - Moderate,
2 - Weak and 1 – None
8. To what extent has your state corporation implemented the following aspects of
Object Oriented Business Engineering Methodology (OO-BEM)?
Use of OO-BEM 1 2 3 4 5
Our firm has a clear vision, mission and corporate
objectives for successful performance
Our firm does reverse engineering by identifying failures in
the existing processes
The state corporation does forward engineering through
selection and subsequent redesign of the process to be
Our firm carries out a pilot study as a test run on the
reengineered process before implementation
The state corporation implements the new process and does
performance review for continuous improvement
9. To what extent has your state corporation implemented the following aspects of
Process Analysis and Design Methodology (PADM)?
Use of Process Analysis and Design Methodology 1 2 3 4 5
The state corporation has a vision statement on business
process improvement
The state corporation selects core business processes to be
reengineered
The firm incorporates IT as an integral part in analysis and
design of process to be reengineered
The corporate implements the new process by creating
completely new rules, techniques or ways of operation
The state corporation does performance review iteratively
for continuous improvement
38
Part C: Measurement of Organizational Performance
Kindly indicate on a scale of 1 – 5 where:
5 – Strongly agree, 4 – Agree, 3 - Moderate, 2 - Disagree and 1 – Strongly disagree
10. To what extent do you concur with the following aspects on Organizational
Performance in your corporation
Aspect of Organizational performance 1 2 3 4 5
Our organization generates more revenue at minimized cost
for the last five years
The Return on Investment (ROI) has increased as compared
to the previous periods
The state corporation has experienced increased market
share over the previous years
The firm’s Profitability, Debt and Liquidity Ratios have
improved over the previous years
There is more Efficiency and Effectiveness in operations
due to eliminated constraints and bottlenecks
There is optimum use of resources with reduced wastages
There is an improved firm productivity due to top
management involvement in BPR implementation
Tasks have become more automated and more efficient
leveraging on organization performance
Thank You
39
APPENDIX III: List of Commercial State Corporations in Kenya
1. Cooperative Bank of Kenya
2. Industrial and Commercial Development Corporation
3. Industrial Development Bank
4. Jomo Kenyatta Foundation
5. Kenya Airways plc.
6. Kenya Broadcasting Corporation
7. Kenya Electricity Generating Company Ltd
8. Kenya Electricity Transmission Company Ltd
9. Kenya Industrial Estates
10. Kenya Meat Commission
11. Kenya National Trading Corporation
12. Kenya Pipeline Company Ltd.
13. Kenya Ports Authority
14. Kenya Post Office Savings Bank
15. Kenya Power
16. Kenya Railways Corporation
17. Kenya Revenue Authority
18. Kenya Seed Company Ltd
19. Kenya Tourist Development Corporation
20. Mumias Sugar Company Ltd
21. National Bank of Kenya
22. National Housing Corporation
23. New Kenya Cooperative Creameries Ltd.
24. Postal Corporation of Kenya
Source: (Performance Evaluation Report, 2010/2011)