CATALOUGE SERIAL NO: TSL/AHB/MAY/033/18-19, Rev-02May 23, 2018
Auction Catalogue Auction conducted by A H Bilimoria & Co.
SALE OF CAPITAL ITEMS OF TATA STEEL LIMITED, ON ‘’AS IS WHERE IS AND NO COMPLAINT BASIS’’Catalogue Serial Number: TSL/AHB/MAY/033/18-19, Rev-02Materials : CAPITAL ITEMSSeller: Tata Steel Limited Auction website: www.ahbilimoria.com
e-Auction Date & Time: 24th May, 2018…….. at 11.00 AM
Inspection Date & Time: 22nd May, 2018 : At 10.30 AM---------------- For inspection of materials the interested customers should report at GOPAL MAIDAN, Opp. Novelty Restaurant, Bistupur Police Station, Jamshedpur-831001 BY 10.00 A.M.
Date of Security Money Deposit 23rd May, 2018 Till ……… 05.00 PMContact Details:
For Post Auction @ A H Bilimoria & CompanyAuction Room 033-2229-4833/6577Inspection & Helpdesk Mr. A Dey- 09831132642, Mr. Bimal Bhardwaj-09431373386Money Receipts Mr. Y John – 09432368402Delivery Order Mr. A Mazumdar- 09883421336Sale Confirmation Letter Mr. A Das - 033-2229-4833 / 6577 / 2760, 30290771Refund Mr. S Paul - 033-2229-4833 / 6577 / 2760,Demand Note Mr. S Paul - 033-2229-4833 / 6577 / 2760,Disablement Mr. A Mazumdar- 09883421336Security Deposit Mr. S Paul - 033-2229-4833 / 6577 / 2760,Customer Complaint Mr. A K Sil – 09830074122, Mr. D Pyne – 09830438481For any unresolved issues Email_ [email protected],[email protected] for unresolved issues Mr. A K Sil – 09830074122, Email _ [email protected], [email protected]
For Commercial Issue : Tata Steel Limited:-Contact Person Mr. Surajit Sen, E-mail- [email protected]
For Delivery related Issued @ Tata Steel Limited:-Contact Person Contact Number Provided in Material List.
GPS Installation in Vehicles: GPS will be mandatory for each vehicle entering TSL Works with effect from 1st September 2015, GPS will be installed by vendor E-Trans outside TSL Works gate with a nominal charges of Rs. 100 per vehicle.
A. MATERIAL DETAILS: AS PER ANNEXURE :
Page 1 of 16
CATALOUGE SERIAL NO: TSL/AHB/MAY/033/18-19, Rev-02May 23, 2018
B. Payment and Lifting Schedule:
Lot No.
Payment ScheduleLifting Schedule
(working days from the next day of DO release)
EMD 1st installment 2nd installment 1st installment lifting days
2nd installment lifting days
For All Material 02 Working days from Date of Lot Confirmation
03 Working Days From Date of EMD
03 Working Days from the 1st Installment date[Only Applicable if material value (Rate X Tonnage)
crosses Rs. 10 Lakh]
10 Working days from the D/O date
10 Working days from the D/O date
1. Suitable extension of due date for payment and lifting will be accorded in case of any eventualities like Strike/ Bandh/ Special restriction on vehicular movement imposed by the local Administration etc.
2. Requirements of participation:2.1 Registration: Before participation in the e-Auction, a prospective bidder shall be required to get registered with A H Bilimoria & Co. For details visit
www.ahbilimoria.com
2.2 Documentation: The following documents need to be submitted by the bidder interested in participating in the e-Auction to A H Bilimoria & Co. prior to theDate of the e-Auction.
PAN Card, TIN No, Registration Form Letter of Interest duly signed and stamped by bidder. Each page of the Terms & Conditions to be signed and stamped by the buyer and to be submitted to A H Bilimoria & Co. Bidders are requested to submit copies of their SOI's before participating in the e Auction.
2.3 Security Deposit: Non-Interest bearing security deposit of Rs.50,000/- (Rupees Fifty Thousand only) in favour of “A H Bilimoria & Co.” payable at Kolkata/Jamshedpur.
2.4 Modes of Security Deposit: PO / DD / CHQ or through NEFT in favour of "A. H. BILIMORIA & COMPANY" to be deposited with HDFC Bank A/c. No. 06932560001205, IFSC Code: HDFC0000693, Branch name: 31, Chowringhee Road, Kolkata – 700016.
3. Inspection Rules & Policy: All interested parties should reach at GOPAL MAIDAN, Opp. Novelty Restaurant, Bistupur Police Station, Jamshedpur-831001, by 10:00 AM (or as announced) on the date
of inspection. Only registered customers/bidders/representatives of firms shall be allowed for inspection of material, subject to fulfilling their safety requirement of the steel works. Taking photographs of the material is strictly prohibited. Customers are advised to ensure that they inspect the materials on offer on the scheduled date as mentioned in the catalogue, before
Participating in the auction. It is retreated that all materials are offer / sold by Tata Steel on “AS-IS-WHERE-IS” and “NO-COMPLAINTS” basis, and no complaint what so evershall be entertained regarding the quality of materials after the sale.
(All are required to bring safety Goggles, Safety Helmet & Safety Shoes. Without the safety equipment’s no one will be allowed to inspect the material inside the works)
Page 2 of 16
CATALOUGE SERIAL NO: TSL/AHB/MAY/033/18-19, Rev-02May 23, 2018
“TATA Steel would not accept any claim from any customer for non-inspection of materials.”
Interested bidders have to come with safety shoes, safety jackets, and safety goggles & safety helmets at the time of inspection. All interested parties have to arrange for their own safety shoes, safety jackets, safety helmets and safety goggles as per Tata Steel standards. No person will be allowed to enter the works without these. Compliance to Tata Steel safety norms is a must. No complaints during lifting, in what-so-ever manner, will be entertained if customers fail to inspect the materials during scheduled inspection dates. No ''people movement'' shall be allowed within the danger zone, at the time of loading/delivery of materials from the yards. Tata Steel will not be responsible for any delays arising out of non-compliance to Tata Steel norms.
4. Bidding modalities: 4.1 Price Bid Basis: In Indian rupees as per unit of measurement as given in Material List. Price to be quoted is basic, ex- location exclusive of taxes (In case of consignment agency
sale price to be quoted ex location inclusive of taxes), and any other statutory levies.4.2 Bid Increment : Rs.100/- ( Rupees Hundred only ) / (or as specified)4.3 Type of Auction: English No Ties 4.4 Bid Validity: Bid shall be valid for 10 (Ten working days excluding Saturdays, Sundays and holidays) working days counted from the next day of auction process in case of
auction against a catalogue which is completed on the same day. And if it is continuing on any other day the counting of days for lot confirmation shall be from the next day of completion of entire auction process.
4.5 Bid duration: Lots open for bidding would be 10 minutes only. If, No bids received within these 10 minutes the lots are closed automatically.4.6 Auto Extension of the Auction Timings: In the event of bids in the last sixty (60) seconds of the scheduled bid time, the Bid Timings are automatically extended for One hundred
eighty (180) seconds from each such bid. Such Auto Extension shall continue until no bids are placed for sixty (60) seconds (Engine remains inactive for sixty (60) seconds. The Inactivity Time for Auto Extension purpose is normally “3” minutes. "Service Provider" however retains the right to change the “Inactivity Time” as well as “Extension Period”. The Inactivity Time applicable for the particular Online Bid shall be visible to the customers on the Bidding page.
5. Taxes & duties:5.1 GST : As applicable5.2 TCS : As applicable. In case of availing of concessional rate of TCS proper certificate issued by appropriate Income Tax
authority are to be issued in favour of the Principal Company along with payment. Self certification of Form no 27C is not acceptable. Form 27C will also have to be certified by appropriate Income tax authorities.
5.3 Any change in taxes applicable at the time of lifting shall be applicable.
6. Payment terms & conditions : 6.1 Payments:
PAYMENT FACILITY BY RTGS / NEFT ONLY Account no. [Sample: TATAHB followed by Party code] (Each individual customer will be provided with Account number to be provided by AHB) Beneficiary name: TATA STEEL LIMITED A H B Bank Name: HDFC BANK LTD. Branch Name: Sandoz Branch, Mumbai IFSC Code: HDFC0000240
6.2 EMD: 10% of the material value to be paid within 02 (Two) working days from the date of lot confirmation. EMD to be adjusted in the final installment only. EMD payment is to be made within the time limit as given in letter of confirmation. No extension will be provided for the same.
6.3 Balance Payment Time: (As per payment schedule)
Page 3 of 16
CATALOUGE SERIAL NO: TSL/AHB/MAY/033/18-19, Rev-02May 23, 2018
6.4 Delayed Payment Charges (DPC) : Installment payments with DPC @ five (05) paise per Rs. 100 per day will be accepted up to 4 (Four) working days from due date of installment payment as mentioned in the confirmation letter. This is not applicable for EMD payment.
6.5 Saturdays& Sundays are excluded for counting purpose for payment schedule.6.6 In the event of Non-Receipt of Payment within the stipulated period of Payment, the Sale Offer for the approved Lot shall stand withdrawn automatically.6.7 Buyers have to send the payment deposit slip (UTR No /Scan Copy of NEFT/RTGS Transaction Slip) against Lot No. immediately after the payment to AHB at email id:
7. Lifting terms & conditions:7.1 DOs will be handed over to authorized representatives of bidders on receipt of payment. Lifting date is calculated from the next day of DO Release date. 7.2 Loading Charges: Rs.100 per MT all locations7.3 Loading shall be given strictly as per the statutory norms & safety norms of Tata Steel Ltd.7.4 Lifting with Ground Rent: Lifting along with ground rent will be allowed up to 4 (four) working days from the last date of lifting period. In case the lifting is not complete, and no
request is made by the customer within the period of four days, the company reserves the right to close the lot, and refund the balance to the party after deducting for any shortfall in lifting as per norms laid down in the catalogue. Ground Rent will be calculated on balance unlifted quantity @ 05 paise (inclusive of tax) per Rs.100/- per day
7.5 Additional lifting days for advance payment of installment - If the installment payment is made in advance, then additional lifting days (equivalent to the number of days payment made in advance) would be given. This would not be applicable for EMD payment.
7.6 PICK & CHOOSE NOT ALLOWED FOR ANY OF THE LOTS.
7.7 LOT TRANSFER WILL NOT BE ALLOWED & NO STOCK TRANSFER WILL BE DONE.
7.8 Process for transfer of ownership of vehicles sold in auction: Customer shall submit their authorization letter to AHB. AHB will hand over the same to Liaison Cell with a forwarding letter along the authenticated DO copy.AHB will collect the ownership papers from Liaison Cell for handing over to the customer for applying for transfer of ownership in DTO’s office. After transfer of ownership, the customer will show the approach Liaison Cell to collect the delivery advice for the vehicle.AHB will arrange the gate pass for the customer to visit Liaison Cell.
7.9 USE OF HYDRA CRANES BY CUSTOMERS IN ANY PREMISES/LOCATION /STOCKYARDS OF TATA STEEL AND ITS VENDORS/CONSIGNMENT AGENTS' PREMISES IS BANNED.
8. Penalties:8.1 The following penalties shall be applicable in the eventuality of a buyer defaulting in making the payment of EMD (wherever applicable) or any installment/s, as per the
stipulated schedule for each lot, in a financial year: In the first instance, a penalty of Rs. 50,000/- (Rupees Fifty Thousand only) shall be recovered from the customer. In the second instance, a penalty of Rs.100,000/- (Rupees One Lakh only) shall be recovered from the customer. In the third, and any subsequent instance, a penalty of Rs.150,000/-(Rupees One Lakh Fifty thousand only) shall be recovered and the customer shall be debarred
from participating in any auction for a period of three months from the date of debarment.In the event of any default, the customer’s user id will be disabled and the customer will be blocked from participating in any auction of TSL with immediate effect.
The defaulting customer shall be allowed 06 (six) working days to deposit the penalty as mentioned above. In case the penalty is not received within the stipulated period, the customer’s security deposit shall be forfeited, and the defaulting customer shall be debarred from participating in any auction of TSL.
8.2 If after making payment of EMD (wherever applicable), the installment payment/s are not made by the customer as per the stipulated schedule for each lot, the entire EMD amount against such lot shall be forfeited.
Page 4 of 16
CATALOUGE SERIAL NO: TSL/AHB/MAY/033/18-19, Rev-02May 23, 2018
8.3 In case of non- lifting of full lot quantity after making full payment, a penalty equivalent to 20% of the material value for the un-lifted quantity against each lot shall be recovered from the customer.
8.4 Penalty for dishonour of cheques: In case of dishonor of a payment instrument deposited by a customer for any reason whatsoever, the following shall be recovered from the customer:-
Rs.1000/- (tax inclusive) in form of Demand Draft towards bankers charges per instrument.
Delayed payment charges @ 5 paise per Rs.100/- per day for the period of delay beyond the due date.
Penalty @ 1% ( Inclusive of tax) of the dishonoured amount, subject to a maximum of Rs.25000/- ( Rupees Twenty Five Thousand Only) per dishonoured instrument
In case of non- compliance by the bidder the penalties as given in clause no. 7.1 shall be applicable.
DEFAULTS WOULD BE COUNTED AGAINST TATA STEEL LIMITED AND NOT AGAINST A PARTICULAR AUCTIONEER
9. Lot Closure Norms :
For Lot Closure, the tolerance would be ± 10% of the original quantity. However no tolerance is applicable for high value items with per ton realizable value of Rs. 50000 and more.
10. Complaints :Complaints, if any, with regard to any transaction shall have to be lodged by the buyer within three calendar months from the date of last invoice. No complaint shall be entertained thereafter, under any circumstances.
11. Jurisdiction :Any dispute arising out of any contract shall be decided in Jamshedpur by the courts in Jamshedpur and by no other courts. The courts in Jamshedpur shall have exclusive jurisdiction to adjudicate upon any such dispute.
12. General terms & conditions:12.1 Any dispute on condition of material shall not be entertained at any point after confirmation of lot.
12.2 All materials are offered/sold on “As is Where is Basis” and “No Complaint Basis”.
12.3 Payment and invoicing has to done in the name of the H1 bidder, subject to the prices being approved.
12.4 Material purchased should be the only material being lifted from the designated location. Tata Steel has the right to check any vehicle at any moment of time. If material lifted differs from the material that is purchased by the buyer, and then the buyer/authorized representative will be permanently debarred and penal action against the buyer/ authorized representative as deemed fit shall be taken by Tata Steel Ltd.
12.5 If the safety compliance is not followed then Tata Steel can penalize the buyer/authorized representative as deemed fit.
12.6 These terms and conditions as stated above supersede the relevant terms & conditions that are given in Tata Steel Secondary General Terms and Conditions.
The terms & conditions not covered above will be as per Tata Steel’s Secondary General Terms and Conditions. Revised Standard Terms & Conditions For Tata Steel Secondary Products Auction w.e.f. 1-April-05
Page 5 of 16
CATALOUGE SERIAL NO: TSL/AHB/MAY/033/18-19, Rev-02May 23, 2018
13. Lot Photograph: Photographs of lots are at best indicative only and do not necessarily reflect the actual condition of lots. All bidders are advised to physically inspect the offered lots before participating in the auctions. Tata steel or AHB shall not be responsible or liable for any error of judgment or bids put by bidders acting on the basis of these photographs.
14. Documents for verification regarding entry of vehicles inside Tata Steel works :
a. 15.06.2014, Eye Test certificate production is mandatory for all Truck Drivers. If the age of the driver is less than 45 years frequency of production of such certificate is once a year and if the age of the driver is more than 45 years the frequency of production of such certificate will be at an interval of every 6 months.
15. Compliance to safety norms15.1 Authorized persons (of the customer) involved in lifting of the materials will be allowed only with Personal Protective Equipments (PPE) i.e.,Safety Shoes, Safety Helmet,
Safety Goggles, Fluorescent Jacket and Hand Gloves. No "people movement" shall be allowed at the time of loading/delivery of materials from the yards" Tata Steel will not be responsible for any delays arising out of Non- Compliance to the Safety Norms.
15.2 Documents for verification regarding entry of vehicles inside Tata Steel works :
All customers to note that presentation of following set of documents to TATA STEEL authorities is COMPULSORY at the time of reporting of vehicles at TSL designated Gate for entry of Customer trucks/vehicles.a. Driving License of driver,b. Registration Card,c. Commercial Certificate,d. Fitness Certificate of Vehicle,e. Re-registration for vehicles older than 15 yearsf. InsuranceThe checklist form will be filled in at TSL designated Gate for entry of Customer trucks/vehicles before entry of vehicle.
15.3 The drivers of the vehicle must have the eye test certificate. The frequency of the testing would be as below:
1. If the age of the person is less than 45 years - Once in a year
2. If the age of the person is 45 years or more, the testing is required to be done once in every 6 months
15.4 Requirements: a) Buzzer with Turning Indicator:- 1st June b) SUPD & RUPD:- With Immediate effect
Page 6 of 16
CATALOUGE SERIAL NO: TSL/AHB/MAY/033/18-19, Rev-02May 23, 2018
Sl. No. Safety Parameters to be checked
Page 8 of 16
CATALOUGE SERIAL NO: TSL/AHB/MAY/033/18-19, Rev-02May 23, 2018
1 Three Piece Mirror( Truck, Trailer & Dumper)-Helper side
2 Single Mirror- Driver side
3 Rear View Mirror (Tata Ace, 207, Jeep etc.)
4 Service Brake
5 Parking Brake
6 Seat Belt
7 Head Light
8 Parking Light
9 Blinker
10 Horn
11 Reverse Alarm
12 Wiper
13 Windshield Glass
14 Air Pressure Min. 7 Kg/Cm^2
15 Run Under Protection Guard as per TSL standard
16 Side under Protection Guard as per TSL standard
17 Tyre Condition (Tread Depth, Cut Mark etc.)
18 Any Oil Leakage from the vehicle
19 Physical condition of Dallah
20 Availability of scotch block
21 Buzzer with side indicator
22 Driver's eye examination report
Legal Documents to be checked:
Sl. No. Documents to be Checked
1 RC Book
2 Insurance
3 Pollution
4 Driving licence
5 Fitness for more than 15 years old vehicle
6 NOC for outside vehicles
For ODR items Customer / Authorised Lifter has to do Route Mapping in consultation with IBMD. Post Ro.
Page 9 of 16
CATALOUGE SERIAL NO: TSL/AHB/MAY/033/18-19, Rev-02May 23, 2018
16. SPECIAL TERMS AND CONDITIONS FOR INTERNET AUCTION BANDWIDTH PROBLEMS, CONNECTIVITY PROBLEMS WITH THE LOCAL ISP (INTERNET SERVICE PROVIDER), SLOWNESS TO ACCESS PAGES FOR DOWNLOADING ETC. ARE BEYOND THE CONTROL OF THE STEEL LTD. AND A H BILIMORIA & COMPANY. HENCE NO RESPONSIBILITY LIES WITH THE STEEL LTD. OR A H BILIMORIA & COMPANY FOR THE ABOVE PROBLEMS FACED, IF ANY, BY THE BIDDERS BEFORE/DURING THE AUCTION ANY BID PLACED USING THE BIDDER'S USERNAME AND PASSWORD IS UNCONDITIONALLY BINDING ON THE BIDDER TO WHOM SUCH USERNAME AND PASSWORD HAD BEEN ALLOTTED AND HE SHALL BE SOLELY RESPONSIBLE FOR MAINTAINING THE CONFIDENTIALITY OF THE SAME AND FULLY RESPONSIBLE FOR ALL ACTIVITIES THAT OCCUR UNDER THEIR USERNAME AND PASSWORD. HENCE THE USER IS ADVISED TO CHECK THE USERNAME AND PASSWORD BEFORE THE AUCTION IN ORDER TO FAMILIARISE HIMSELF WITH THE SAME AND IS ADVISED NOT TO REVEAL IT TO ANYONE ELSE SO AS TO PREVENT MISUSE OF THE SAME. THE BIDS MADE BY THE BIDDERS AGAINST THEIR USERNAME AND PASSWORD SHALL BE IRREVOCABLE.THE BIDDERS ARE ADVISED TO REGISTER AND PRE-QUALIFY FOR BIDDING WELL IN ADVANCE AND PLACE THEIR BIDS EARLY IN ORDER TO TAKE CARE OF ANY UNFORESEEN TECHNICAL DIFFICULTY THAT MIGHT SURFACE IN THE INTERNET OPERATIONS.
Quantity offered is based on eye estimation. Delivery will be made for the estimated quantity or actual ground stock, whichever is lower. Estimation error may arise. After inspection, no complaint of whatsoever nature on estimated /offered quantity shall be entertained under any
circumstances. Bidders are advised to make their own judgment on offered quantity before bidding
Customers are requested to generate individual gate pass by clicking on the following link http://203.197.123.30/vgps/
Note: TSL reserves the right to track IP address, MAC number and geolocation of bidding customers whenever customers participate in any auction on the A H Bilimoria & Co. auction platform for TATA Steel.
Speed Limit for Heavy Vehicles to max. 25 kms. Anybody exceeding the same may get penalized.Gate Pass issuance to lifters and labours of 10 days to be replaced with DO validity period or max. 30 days whichever is lower.
LIST OF MATERIALSSl. No.
Source Location Lot No. Material code Material Description
Qty. UOM GST TCS LoadingLIFTING PERIOD
Contact Person Contact No
1 LD3
Ram mandir
yard, 2nd Floor, Jsr
RYMAY18001
150001881
Rej. Mix scrap including M.S C.A coil Al coil hoop iron plasticVideo Linkhttp://www.ahbilimoria.com/lot-video.php?v=rymay18001-1527067257.wmv
32.01 MT 18% 1%RS.100/- PER MT
10 Working
Days from the D/O
date
Mr. Aloke Ranjan/
Mr. Sourabh
Anand
7763807839/
7763807084
2
RMM, G FCE,
COKE PLANT, BATT-
3-8
Ram mandir
yard, 2nd Floor, Jsr
RYMAY18002
150001901
Rej. Gearbox with loose partVideo Linkhttp://www.ahbilimoria.com/lot-video.php?v=rymay18002-1527067645.wmv
6.68 MT 18% 1% RS.100/- PER MT
10 Working
Days from the D/O
date
Mr. Aloke Ranjan/
Mr. Sourabh
Anand
7763807839/
7763807084
Page 10 of 16
CATALOUGE SERIAL NO: TSL/AHB/MAY/033/18-19, Rev-02May 23, 2018
3
LONG TONG
YD, HSM, CRM, ECL,
AEGMENT
SHOP
Ram mandir
yard, 2nd Floor, Jsr
RYMAY18003
150001863
Rej. machine part incld. work roll segment pump wheel Hyd. CylinderVideo Linkhttp://www.ahbilimoria.com/lot-video.php?v=rymay18003-1527067762.wmv
28.19 MT 18% 1%RS.100/- PER MT
10 Working
Days from the D/O
date
Mr. Aloke Ranjan/
Mr. Sourabh
Anand
7763807839/
7763807084
4LD3, HSM, CRM
Ram mandir
yard, 2nd Floor, Jsr
RYMAY18004
150001863
Rej. Grinding wheel including broken wheelVideo Linkhttp://www.ahbilimoria.com/lot-video.php?v=rymay18004-1527068022.wmv
3.94 MT 18% 1% RS.100/- PER MT
10 Working
Days from the D/O
date
Mr. Aloke Ranjan/
Mr. Sourabh
Anand
7763807839/
7763807084
5
MRD, PH4, I FCE, CRM, A-F FCE,
SERVICE
TRANS, LCP,
COKE PLANT
Ram mandir
yard, 2nd Floor, Jsr
RYMAY18005
150001864
Rej. Aluminium Cables (No copper cable)Video Linkhttp://www.ahbilimoria.com/lot-video.php?v=rymay18005-1527068380.wmv
21.97 MT 18% 1% RS.100/- PER MT
10 Working
Days from the D/O
date
Mr. Aloke Ranjan/
Mr. Sourabh
Anand
7763807839/
7763807084
6 CRM
Ram mandir
yard, 3rd Floor, Jsr
RYMAY18006
150001866
Rej. Tank cover M.S attached rubberVideo Linkhttp://www.ahbilimoria.com/lot-video.php?v=rymay18006-1527068704.wmv
3.37 MT 18% 1% RS.100/- PER MT
10 Working
Days from the D/O
date
Mr. Aloke Ranjan/
Mr. Sourabh
Anand
7763807839/
7763807084
7
LIME PLANT, SERVIC
E TRANS,
LD2, LD3, I FCE
Ram mandir
yard, 2nd Floor, Jsr
RYMAY18007
150001905
Rej. Electrical scrap & Light fittingVideo Linkhttp://www.ahbilimoria.com/lot-video.php?v=rymay18007-1527068936.wmv
6.33 MT 18% 1% RS.100/- PER MT
10 Working
Days from the D/O
date
Mr. Aloke Ranjan/
Mr. Sourabh
Anand
7763807839/
7763807084
Page 11 of 16
CATALOUGE SERIAL NO: TSL/AHB/MAY/033/18-19, Rev-02May 23, 2018
8
BIM, COKE
PLANT, BATT-3
Ram mandir
yard, 3rd Floor, Jsr
RYMAY18008
150001912
Rej. GC Sheet DismantledVideo Linkhttp://www.ahbilimoria.com/lot-video.php?v=rymay18008-1527069227.wmv
23.84 MT 18% 1% RS.100/- PER MT
10 Working
Days from the D/O
date
Mr. Aloke Ranjan/
Mr. Sourabh
Anand
7763807839/
7763807084
9 A-F FCE
Ram mandir
yard, 3rd Floor, Jsr
RYMAY18009
150001866
Rej. Trough CoverVideo Linkhttp://www.ahbilimoria.com/lot-video.php?v=rymay18009-1527069458.wmv
16.43 MT 18% 1% RS.100/- PER MT
10 Working
Days from the D/O
date
Mr. Aloke Ranjan/
Mr. Sourabh
Anand
7763807839/
7763807084
10 A-F FCE
Ram mandir
yard, 3rd Floor, Jsr
RYMAY18010
150001863
Rej. Sinter Screen (Alloy Steel)Video Linkhttp://www.ahbilimoria.com/lot-video.php?v=rymay18010-1527069646.wmv
1.95 MT 18% 1% RS.100/- PER MT
10 Working
Days from the D/O
date
Mr. Aloke Ranjan/
Mr. Sourabh
Anand
7763807839/
7763807084
11 RMYD
Ram mandir
yard, 3rd Floor, Jsr
RY05180001
150001907
Rej. Tyre with/without Rim (14 x 24 (7), 12 x 20 (27), 10 x 20 (22), 7.5 x 16 (12), 6.5 x 10 (2), 6 x 16 (2), 7.5 x 12 (12), 7 x 10 (12), 19.5 (4), 86/840 (5)Video Linkhttp://www.ahbilimoria.com/lot-video.php?v=ry05180001-1527069876.wmv
150 NO 28% 1% RS.100/- PER MT
10 Working
Days from the D/O
date
Mr. Aloke Ranjan/
Mr. Sourabh
Anand
7763807839/
7763807084
12 RMYD
Ram mandir
yard, 3rd Floor, Jsr
RY05180002
150001863
Rej. Machine part incld Conv. Pulley, Gear Box, Housing & Fluid coupling (Qty. is on Eye Estimation)Video Linkhttp://www.ahbilimoria.com/lot-video.php?v=ry05180002-1527070213.wmv
6 MT 18% 1% RS.100/- PER MT
10 Working
Days from the D/O
date
Mr. Aloke Ranjan/
Mr. Sourabh
Anand
7763807839/
7763807084
13 RMYD
Ram mandir
yard, 2nd Floor, Jsr
RY05180003
150000196
Rej. PVC A.C Cover excld. Copper & MS material, only fiber material will be delivered (Quantity is on estimation) Video Linkhttp://www.ahbilimoria.com/lot-video.php?v=ry05180003-1527070670.wmv
0.5 MT 5% 1%RS.100/- PER MT
10 Working
Days from the D/O
date
Mr. Aloke Ranjan/
Mr. Sourabh
Anand
7763807839/
7763807084
Page 12 of 16
CATALOUGE SERIAL NO: TSL/AHB/MAY/033/18-19, Rev-02May 23, 2018
14 RMYD
Ram mandir
yard, 2nd Floor, Jsr
RY05180004
150001903
Rej. Rotor, Stator & Motor with / without copper coil attached (Quantity is on estimation)Video Linkhttp://www.ahbilimoria.com/lot-video.php?v=ry05180004-1527071401.wmv
3 MT 18% 1% RS.100/- PER MT
10 Working
Days from the D/O
date
Mr. Aloke Ranjan/
Mr. Sourabh
Anand
7763807839/
7763807084
15 LD3
Ram mandir
yard, 3rd Floor, Jsr
RY05180005
150000196
Rej. PVC Press filter 6.68 MT 5% 1% RS.100/- PER MT
10 Working
Days from the D/O
date
Mr. Aloke Ranjan/
Mr. Sourabh
Anand
7763807839/
7763807084
16 RMYD
Ram mandir
yard, 1st Floor, Jsr
RY05180006
150001863
Rej. Machine part incld. Flange, Gear Box, Flat Roll, Bridle Roll (Qty. is on estimation)Video Linkhttp://www.ahbilimoria.com/lot-video.php?v=ry05180006-1527071833.wmv
5 MT 18% 1% RS.100/- PER MT
10 Working
Days from the D/O
date
Mr. Aloke Ranjan/
Mr. Sourabh
Anand
7763807839/
7763807084
17 LD3
Ram mandir
yard, 1st Floor, Jsr
RYAPR18004
150001863
Rej. wet roll with attached refractoriesVideo Linkhttp://www.ahbilimoria.com/lot-video.php?v=ryapr18004-1527072002.wmv
36.98 MT 18% 1%RS.100/- PER MT
10 Working
Days from the D/O
date
Mr. Aloke Ranjan/
Mr. Sourabh
Anand
7763807839/
7763807084
18 CRM,
Ram mandir
yard, 2nd Floor, Jsr
RYJAN180151500018
63
Rej. Flat Roll with/without att. Rubber coated (Machine part)Video Linkhttp://www.ahbilimoria.com/lot-video.php?v=ryjan18015-1527072252.wmv
10.2 MT 18% 1%RS.100/- PER MT
10 Working
Days from the D/O
date
Mr. Aloke Ranjan/
Mr. Sourabh
Anand
7763807839/
7763807084
19
MRD, Cu
Godown
Ram mandir
yard, 2nd Floor, Jsr
RY04180001
150000196
Rej. PVC/Rubber Insulation of wires & Cable
1.47 MT 5% 1% RS.100/- PER MT
10 Working
Days from the D/O
date
Mr. Aloke Ranjan/
Mr. Sourabh
Anand
7763807839/
7763807084
Page 13 of 16
CATALOUGE SERIAL NO: TSL/AHB/MAY/033/18-19, Rev-02May 23, 2018
20
RMYD, SP3, H FCE, MRP, LD1
Ram mandir
yard, 2nd Floor, Jsr
RY04180002
150001908
Rej. Conveyor Belt Bundle (Quantity is on eye estimation)
14 MT 18% 1% RS.100/- PER MT
10 Working
Days from the D/O
date
Mr. Aloke Ranjan/
Mr. Sourabh
Anand
7763807839/
7763807084
21 I FCE, LD3
Ram mandir
yard, First Floor, Jsr
RY03180008
150001881
Rej. Pocket & Synthetic filter with/without wooden frame in two location.
20 MT 18% 1% RS.100/- PER MT
10 Working
Days from the D/O
date
Mr. Aloke Ranjan/
Mr. Sourabh
Anand
7763807839/
7763807084
22Fleet
Management
FLTM180501
150004038 Rej. Tyre 15 MT 28% 1% RS.100/-
PER MT
10 Working
Days from the D/O
date
Mr. Ramesh Kumar
23Town
Electrical Store
TWE-180201
150001865
Rej. & Scrap Copper/ copper cable (Miscellaneous items like conductor, bar etc. including attached MS, Excluding pure MS & Wooden drum) Site to be Clear.
3 MT 18% 1% Rs.100/- Per MT
10 Working
Days from the D/O
date
Mr. Sk. Monsob
9234554231
24 CRM BaraCRMB18050
31500018
63 Rej. & Scrap welding machine 2 No 18% 1% Self
10 Working
Days from the D/O
date
Mr. Shailendra
Kumar Pathak
7763807746
25 CRM BaraCRMB18020
31500018
65
Rej. Copper Cable (with without ms/wood cable drum, as is where is basis.
2.5 MT 18% 1%
F-15( Sling
ing- IBMD)
RS.100/- PER MT
10 Working
Days from the D/O
date
Mr. Shailendra
Kumar Pathak
7763807746
26 CRM BaraCRMB18020
11500018
66
Rej. MS Door in side bin scrap yard CRM Bara (Excluding concrete & wood) as is where is basis, site to be cleared.
2 MT 18% 1% RS.100/- PER MT
10 Working
Days from the D/O
date
Mr. Shailendra
Kumar Pathak
7763807746
Page 14 of 16
CATALOUGE SERIAL NO: TSL/AHB/MAY/033/18-19, Rev-02May 23, 2018
27TMH
CANTEEN,JSR
TMH-1804091500001
67
Rej. Deep Fridge, as is where is basis. PC&MOEF certificate required.
1 No 18% 1% Self Loading
10 Working
days from D/O date
Mr. Kumar Lilanand
7763807690
28MRD
TUBES DIV
FEB18/05 140003060 Rej. Saw Cutter Blade 1 MT 18% 1% Rs.100/-
Per MT
10 Working
Days from the D/O
date
Mr. Shalesh Kujur/ Ms.
Sarita Singh
9431521856/
9431380275
29MRD
TUBES DIV
FEB18/06 140002991
Rej. Electrical Scrap, entire materials to be lifted
4 MT 18% 1% Rs.100/- Per MT
10 Working
Days from the D/O
date
Mr. Shalesh Kujur/ Ms.
Sarita Singh
9431521856/
9431380275
30MRD
TUBES DIV
FEB18/07 140005540
Rej. Mechanical Item , entire materials to be lifted
15 MT 18% 1% Rs.100/- Per MT
10 Working
Days from the D/O
date
Mr. Shalesh Kujur/ Ms.
Sarita Singh
9431521856/
9431380275
31MRD
TUBES DIV
FEB18/12 140002115
Rej Corrugated Sheet (Incl. Small pcs, broken and folded condition ) , entire materials to be lifted
10 MT 18% 1% Rs.100/- Per MT
10 Working
Days from the D/O
date
Mr. Shalesh Kujur/ Ms.
Sarita Singh
9431521856/
9431380275
32MRD
TUBES DIV
FEB18/18 140001209
Melting scrap consist of pipe psc, Iron Rod ,window Grill and other scrap
60 MT 18% 1% Rs.100/- Per MT
10 Working
Days from the D/O
date
Mr. Shalesh Kujur/ Ms.
Sarita Singh
9431521856/
9431380275
33Store,
TUBES DIV
MAR18/03 140003540 Rej. Zet Tubes and Furnace Roles 0.4 MT 18% 1% Rs.100/-
Per MT
10 Working
Days from the D/O
date
Mr. Shalesh Kujur/ Ms.
Sarita Singh
9431521856/
9431380275
Page 15 of 16
CATALOUGE SERIAL NO: TSL/AHB/MAY/033/18-19, Rev-02May 23, 2018
34MRD
TUBES DIV
MAR18/05 140003110 Rej Motors 1 MT 18% 1% Rs.100/-
Per MT
10 Working
Days from the D/O
date
Mr. Shalesh Kujur/ Ms.
Sarita Singh
9431521856/
9431380275
35Tech Serv
Tube Division.
JAN2018007 140003110
Rej. Polishing & sanding machine for Gen Ser
1 No 18% 1% Self
10 Working
Days from the D/O
date
Mr. ShaleshKuj
ur/ Ms. Sarita Singh
9431521856/
9431380275
36 SNTI N Road
SNT180501 150001866 Rej. Light Melting Scrap 1 MT 18% 1% Self
10 Working
Days from the D/O
date
Mr. Arbind Chandra
7368806397
Page 16 of 16