Nitride Bonded Silicon Carbide

Application

2.50-2.60

Porosity (%): 11.0-15.0

Modulus of Rupture (MPa): 30.0-45.0

4.7

Thermal conductivity at 1200 oC (Kcal.m/m2 oC h) 14

Maximum Use Temperature (oC): 1550

Typical Chemical Analysis (%)……………….. 71.0-75.0 %……………….. 19.0-23.0……………….. 1.0-5.0……………….. 0.0-0.5

The properties shown on this data sheet represent typical average results generated using standard ASTM testmethods (unless otherwise noted) conducted under controlled condition (using standard rectangular shapes), and should not be considered to be guaranteed specifications. Properties are subject to normal manufacturingstatistical standard deviation ranges, and Resco Products, Inc. reserves the right to modify the propertiesand specifications at any time without prior notice.

RESCO PRODUCTS disclaims any express or implied warranties based on this sheet.

06/30/09 is the date that this data sheet was updated. Check with your RESCO sales representative or RESCOwebsite to determine you have the current sheet.

Silicon Nitride (Si3N4)SiO2

CAST NITERM 500

PRODUCT DATA

Fe2O3

Coefficient of Thermal Expansion (x 10-6 cm/cm/oC):

Cyclones and Apex to Mining; Special pieces for non-ferrous metals foundries; Thermocouple tubes; Burner tubes; Plate setters, rings, and special parts to kiln furniture.

Silicon Carbide (SiC)

Bulk Density (g/cc) :