Download - Catalogue Poral
POROUS ELEMENTS STAINLESS STEEL PORAL®
FILTRATION EFFICIENCY FOR GAS
FLOW RATE OF GAS (AIR)FLOW RATE OF LIQUID (WATER)
PORAL® STAINLESSSTEELFlow rate of water at 20°C(viscosity 1 centipoise)liters/hr/sq.cm
PORAL®
STAINLESSSTEEL
Flow rate at 20°C(viscosity 183 micropoises)
liters/hr/sq.cm
Graphics Use :The pressure P1 is proportional to the viscosity of the gas passing through the media and to the filter thickness.
• P pressure drop read on the chart (in millibar)• viscosity of the gas (in micropoise) at use temperature • 183 air viscosity at 20°C (in micropoise)• e thickness of the filter (in mm)
1
• V gas volume at 0°C (in liters) under a one bar absolute pressure• t gas temperature (in°C)• P absolute pressure of the gas (in bar)
1
Nota: The calculation of the pressure drop of the flow to be used is the actual flow V1
PORAL® GRADE98 % particules stopped (µm)99,9 % particules stopped (µm)
30,20,5
50,41,2
70,72,3
101,23,6
1526
203,28,6
30513
40 820
This table has been obtained by: Separation of dry dust in a flow of 10l/hr/sq.cm.
PORAL® GRADE98 % particules stopped (µm)99,9% particules stopped (µm)
33,24,5
55,99
71216
101624
152637
204058
306090
4090130
This table has been obtained by: Water separation test according to ISO 4572.
Graphics Use :The pressure P is proportional to the viscosity of the liquid passing through the media and to the filter thickness.
1
• P pressure drop read on the chart (in millibar)• viscosity of the liquid (in centipoise) at use temperature • 1 water viscosity at 20°C (in centipoise)• e thickness of the filter (in mm)
FILTRATION EFFICIENCY FOR LIQUID
© 2009 Federal-Mogul Sintertech SAS
Pressure drop (cm W.G.) per mm filter thickness
Pressure drop (cm W.G.) per mm filter thickness
1
Grade
Grade
40 30 20 1510
07
05
03
40 30 20 15 1007
05
03
SINTERTECH
10
5
2
1
0,5
0,30,2
0,10,5 1 2 3 5 10 20 30 50 100
0,5 1 2 3 5 10 20 30 50 1001
235
10
20
50
100
200300
10
5
2
1
0,5
0,30,2
0,1
PORAL® GRADE98 % particules stopped (µm)99,9% particules stopped (µm)
33,85
51722
72330
102939
154560
207397
30102135
40140185
60190270
PORAL® GRADE98 % particules stopped (µm)99,9% particules stopped (µm)
30,71
52,33
73,45
104,67,5
156,212
20714
308,520
4010,526
601335
Grade
© 2009 Federal-Mogul Sintertech SAS
POROUS ELEMENTS BRONZE PORAL®
FILTRATION EFFICIENCY FOR GAS
FLOW RATE OF GAS (AIR)FLOW RATE OF LIQUID (WATER)
This table has been obtained by: Separation of dry dust in a flow of 18l/hr/sq.cm.
This table has been obtained by: Water separation test according to ISO 4572.
FILTRATION EFFICIENCY FOR LIQUID
PORAL® BRONZEFlow rate of water at 20°C(viscosity 1 centipoise)liters/hr/sq.cm
PORAL®
BRONZEFlow rate at 20°C
(viscosity 183 micropoises)liters/hr/sq.cm
Graphics Use :The pressure P is proportional to the viscosity of the gas passing through the media and to the filter thickness.
1
• P pressure drop read on the chart (in millibar)• viscosity of the gas (in micropoise) at use temperature • 183 air viscosity at 20°C (in micropoise)• e thickness of the filter (in mm)
1
• V gas volume at 0°C (in liters) under a one bar absolute pressure• t gas temperature (in°C)• P absolute pressure of the gas (in bar)
1
Nota: The calculation of the pressure drop of the flow to be used is the actual flow V1
1
Graphics Use :The pressure P is proportional to the viscosity of the liquid passing through the media and to the filter thickness.
1
• P pressure drop read on the chart (in millibar)• viscosity of the liquid (in centipoise) at use temperature • 1 water viscosity at 20°C (in centipoise)• e thickness of the filter (in mm)
Pressure drop (cm W.G.) per mm filter thickness
Pressure drop (cm W.G.) per mm filter thickness
4060 30 20 15 10 07
05
03
4060 30 20 15 10 07 05
03
SINTERTECH
0,5 1 2 3 5 10 20 30 50 100
0,5 1 2 3 5 10 20 30 50 1001
235
10
20
50
100
200300
CRB 10.60100600
1750e = 3 mm
12012
CRB 10.120100
12003500
12012
PRODUITS BRONZE / BRONZE PRODUCTSPORAL®
TUBES SANS SOUDURE / SEAMLESS TUBES
ITEM Ø (mm)L (mm)S (cm²) Classe/GradeDesignation : Item – longueur/length - classe/grade. Ex.: BLR 26.48.15
TUBES SOUDES / WELDED TUBES
ITEMØ (mm)L (mm) S (cm²) Classe/Grade
Designation : Item - épaisseur/thickness (x10) - classe/grade. Ex.: BT 8.8.20.10 Soudure étain standard./Standard tin welding. Température max. d’utilisation/Maxi.temperature of use: 100°CSoudure électrique sur demande./Electrical welding on request.Température max.d’utilisation/Maxi.temperature of use: 150°C
CARTOUCHES / CARTRIDGES
ITEM Ø D (mm)L (mm)S (cm²) Classe/Grade Ø C (mm) H (mm) Designation : Item - classe/grade. Ex.: CRB 5.90.15Matière/Material : Poral® Bronze : collerettes/flange – fond/base : laiton/brass – soudure/welding: étain/tinTempérature max. d’utilisation/Maxi. Temperature of use : 100°C.Soudure électrique sur demande./Electrical welding on request.Nota : Soudure transversale pour/Transverse weld for L = 900,1000, 1200 mm
BLR 2626±1
4839
05/15/40
BLR 3232±1250200
e = 3 mm
BT 20.550±1300450
BT 10.550±1600900
03 à/to 1520 à/to 60
BT 16.880±1,5
250625
BT 8.880±1,5
5001250
BT 10.10100±2
300875
e = 2 mme = 3 mm
BT 5.10100±2
6001750
CRB 3.2532250200
05/15/40
488
CRB 3.5032500400
e = 3 mm
488
CRB 5.3050300450
708
CRB 5.6050600900
03 à/to15
708
CRB 5.9050
9001350
e = 2 mm
708
CRB 8.5080
5001250
10010
CRB 8.10080
10002500
20 à/to 60
10010
SINTERTECH
© 2009 Federal-Mogul Sintertech SAS© 2009 Federal-Mogul Sintertech SAS
PRODUITS BRONZE / BRONZE PRODUCTSPORAL®
PLAQUES / PLATES
ITEM L (mm)* I (mm)*S (cm²)* Classe/Grade
Designation : Item - épaisseur/ thick. (x10) - classe/grade. Ex.: BK 10.30.15Mini dim. 300 mm x 300 mm *mini dim Dimensions supérieures possibles par composition de plaques BK. Soudure étain.Higher dimension are possible by composition of BK plates. Tin welding.Soudure électrique sur demande./Electrical welding on request.
DISQUES / DISCS
ITEMØ D (mm)S (cm²)Classe/Grade
Designation : Item - épaisseur/thickness (x10) - classe/grade. Ex.: BC 114.20.05Tolerances js 15 (sauf classe/except grade: 40 & 60 : k15)
CONIQUES / CONES
ITEM Ø D (mm)H (mm) S (cm²) Classe/Grade F (mm) e (mm) c (mm) b (mm) Designation : Item - classe/grade. Ex.: BCN 15.05
SILENCIEUX / SILENCERS
ITEMØ D(mm)A (mm)E (mm)H (mm)Designation : Item - CO (pas du gaz conique NPT/conic gas thread NPT) ou/or CY (pas du gaz cylindrique/cylindric gas thread).Ex.: SMH 3 CO
BK 4500500
2500
BK 5600300
1800 03 à/to 1510 à/to 6030 à/to 60
BK 8500250
1250
BK 10300300900
e = 2 mme = 3 mme = 5 mm
BK 16250250625
BC 66
0,3
BC 13131,3
BC 21213,5
BC 30307
BC 424214
BC 606028
e = 2 mme = 3 mm
BC 9090
63,5
BC 114114102
BC 250250450
03 à/to 1520 à/to 60
BCN 813203
05/108
1,52,54
BCN 12174010
05/10/20122
2,56
BCN 15216020
05/10/20152,538
BCN 21278040
05/10/202133
10
SMH 11/8”10135,522,5
SMH 21/4”13198,536,5
SMH 33/8”17228,546,5
SMH 41/2”21301159
SMH 53/4”2730
11,566,5
SMH 61”34361474
SINTERTECH
© 2009 Federal-Mogul Sintertech SAS
IS 100.1000
100±2,5
1000
3±0,4
3000
CRI 3.2530250200
03-05-10-15-20-30-40
PRODUITS INOX / STAINLESS STEEL PRODUCTSPORAL®
TUBES ISOSTATIQUES / ISOSTATIC TUBES
ITEM Ø ext. nomi.(mm) L(mm) e moy./mean.(mm)
S moy./mean.(cm²)
Classe/Grade 03-05-10-15-20-30-40
ITEM Ø ext. nomi.(mm) L(mm) e moy./mean.(mm)
S moy./mean.(cm²)
CARTOUCHES / CARTRIDGES CRI
ITEM Ø D (mm) L (mm) S moy./mean. (cm²) Classe/Grade e : Voir épaisseur du tube isostatique correspondant. See thickness of isostatic cast tubes.
Ø C (mm) H (mm) Designation : Item - classe/grade. Ex.: CRI 5.90.15
ITEM Ø D (mm) L (mm) S (cm²) Ø TUBE IS Nbr TUBE IS Ø C (mm) H (mm) Classe / Grade Nota : Pour d’autres longueurs et diamètres de tubes composant le faisceau, merci de nous consulter. Please consult us for any other tube length or diameter constituting the cartridge. Designation : Item - classe/grade. Ex.: CFI 890.40
CARTOUCHES / CARTRIDGES CFI
IS 23.1000
23±1
1000
2,4±0,3
650
IS 50.1000
51±1,5
1000
2,4±0,3
1525
IS 60.750
60±1,5
750
2,4±0,3
1360
IS 80.1000
80±1,5
1000
3±0,4
2400
CRI 3.5030500400
CRI 4.2540250300
CRI 4.5040500600
CRI 5.3050
300450
CRI 5.6050
600900
CRI 5.9050
9001350
488
488
608
608
708
708
708
808
808
808
CRI 6.3060
300550
CRI 6.6060
6001100
CRI 6.9060
9001650
CFI 86080±0,5
6001800353
10010
03-05-10-15-20-30-40
CFI 89080±0,5
9002700353
10010
CFI 1060100±2,5
6003500307
12010
CFI 1090100±2,5
9005300307
12010
SINTERTECH
Designation : Item - classe/grade. Ex.: IS 30.600.03
Classe/Grade 03-05-10-15-20-30-40
IS 17.600
17±1
600
2,1±0,3
280
IS 23.600
23±1
600
3,5±0,3
360
IS 30.600
30±1,3
600
3,2±0,3
510
IS 35.600
35±1,3
600
2,2±0,3
620
IS 40.600
40±1,3
600
2,2±0,3
725
IS 50.600
51±1,5
600
2,4±0,3
910
IS 60.600
60±1,5
600
2,4±0,3
1090
IS 80.600
80±1,5
600
2,7±0,4
1460
IS 100.600
100±2,5
600
2,7±0,4
1840
© 2009 Federal-Mogul Sintertech SAS
IK 16250250625
IC 114114102
IC 250250450
PRODUITS INOX / STAINLESS STEEL PRODUCTSPORAL®
BOUGIES / CANDLES
ITEM Ø (mm) L (mm) S (cm²) Classe / Grade Designation : Item - classe/grade. Ex.: BI 5.30.05 Filetage/Thread : M 20/150 Ø 16e : Voir épaisseur du tube isostatique correspondant / See thickness of isostatic cast tubes Nota : Pour d’autres classes, diamètres, longueurs, matières, merci de nous consulter. Other materials of construction, grades, diameters, length available upon request.
PLAQUES / PLATES
DISQUES / DISCS
CONIQUES / CONES
ITEM L (mm)* I (mm)* S (cm²)*
Classe / Grade
ITEM Ø D (mm)S (cm²)Classe / Grade
Classe/Grade 05 & 20 Designation : Item - épaisseur/ thickness (x10) - classe/grade. Ex.: IC 114.20.05Tolerances js 15
ITEM F (mm) H (mm)Ø D (mm)e (mm)c (mm)b (mm)S (cm²)Designation : Item - classe/grade. Ex.: ICN 8.20 Classe/Grade 05 & 20
BAIONNETTES/ELLIPTICAL CANDLES
BI 4.1240±1125150
BI 4.2540±1250300
BI 5.3050±1,5
300450
BI 5.6050±1,5
600900
03-05-10-15-20-30-40
IC 1010
0,7803 à/to 2020 à/to 40
IC 21213,5
IC 30307
e = 2 mme = 3 mm
IC 424214
IC 606028
03 à/to 40
IC 9090
63,5
IC 250 épaisseur/thick.: 3 mm 0/-0,5 mm
IK 56003001800
03 à/to 40
IK 85002501250
e = 3 mm +0,3
IK 10300300900
e = 5 mm +0,3
ICN 8820131,52,511
ICN 121232172
2,525
ICN 1515412123210
ICN 212159272,53
2,820
SINTERTECH
Veuillez nous contacter pour plus d’information. Please contact us for more information.
© 2009 Federal-Mogul Sintertech SAS
Designation : Item - épaisseur/thick. (x10)- classe/grade. Ex.: IK 10.30.15Mini dim. 300 mm x 300 mm *mini dim.Dimensions supérieures possibles par composition de plaques IK soudées. Higher dimensions are possible by basic IK plates welding.
-0,5 -0,5