© 2014 Caterpillar. All Rights Reserved. CAT, CATERPILLAR, BUILT FOR IT, their respective logos, “Caterpillar Yellow,” the “Power Edge” trade dress as well as corporate and product identity used herein, are trademarks of Caterpillar and may not be used without permission.
800.437.4228www.hawthornecat.com
Caterpillar® Performance
Handbook Edition 44
TIRES
32
CONTENTSSelection, Application, Maintenance . . . . . . . . . . 32-1Tire Construction . . . . . . . . . . . . . . . . . . . . . . . . . 32-2 Bias Ply. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32-2 Radial Ply. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32-3Tire Types . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32-3Tire Size Nomenclature . . . . . . . . . . . . . . . . . . . . . 32-3Code Identification for Off-Highway Tires . . . . . . . . . . . . . . . . . . . . . . . 32-4Manufacturers’ Designations – Firestone, Goodyear/Dunlop, Bridgestone, Michelin . . . . . . . . . . . . . . . . . . 32-5 Titan, Triangle, Eurotire, Yokohama . . . . . . . .32-10 Nokian, Belshina, Pirelli, Double Coin . . . . . 32-13Radial Tire Identification: Michelin . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32-15 Goodyear . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32-16 Bridgestone . . . . . . . . . . . . . . . . . . . . . . . . . . . 32-17Ton-Kilometer Per Hour Rating System . . . . . . 32-18Tire Drive-Away Recommendations . . . . . . . . . . .32-19TKPH Ratings – Goodyear Tires . . . . . . . . . . . . . . . . . . . . . . . 32-20 – Bridgestone Tires . . . . . . . . . . . . . . . . . . . . . 32-31 – Michelin Tires . . . . . . . . . . . . . . . . . . . . . . . . 32-39 – Triangle Tires . . . . . . . . . . . . . . . . . . . . . . . . 32-50 – Eurotire Tires . . . . . . . . . . . . . . . . . . . . . . . . 32-52ISO Load Index Speed Symbol – Michelin Tires . . . . . . . . . . . . . . . . . . . . . . . . 32-47Tire and Rim Association Ratings . . . . . . . . . . . 32-53Tire Selection . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32-53 Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32-55 Standard Cold Inflation Pressures . . . . . . . . . 32-56Liquid Ballasting Table . . . . . . . . . . . . . . . . . . . . .32-74
SELECTION, APPLICATION, MAINTENANCEProper tire selection, application and maintenance
continue to be the most important factors in earthmoving economics. Wheel tractors, loaders, scrapers, trucks, motor graders, etc. are earthmoving equipment whose pro duc-tivity and payload unit cost may depend more on tire per-for mance than any other factor.
Off-the-road tires must operate under a wide variety of conditions ranging from dry “potato dirt” through wet severe shot rock. Speed conditions vary from less than 1 mph average to 72 km/h (45 mph). Gradients may vary from 75% favorable to 30% adverse. Climatic conditions, operator skills, maintenance practices, etc. all may have a profound effect on tire life and unit costs.
Although one specific tire construction may be accept-able in a variety of applications, no one tire can meet all requirements on any one machine and perhaps not even one job. The many differences in tire requirements on earthmoving machines have resulted in a wide variety of tread and casing designs being made available. The opti-mum tire selection for a specific machine on a given job should be a joint deci sion between the user and tire sup-plier. Several tire manufacturers have technical and appli-cation representatives in the field for proper guidance in tire selection.
When job conditions change, it may be desirable to select a different tire configuration to meet the new requirements.
TIRES
Edition 44 32-1
PHB-Sec32-14.indd 1PHB-Sec32-14.indd 1 12/20/13 9:14 AM12/20/13 9:14 AM
TIRE CONSTRUCTIONThe pneumatic tire is essentially a flexible pressure
vessel utilizing structural members (nylon, steel cable, etc.) to contain the hoop tension resulting from the inflation pressure. Rubber is utilized as a protective coating and sealant over the structural members and makes up the tread pattern which provides the wearing medium at the ground interface. The following brief explanation of the various tire constructions will assist you in selecting tires for your specific application.
Two distinct tire constructions approved on all Cat® machines are the BIAS PLY and RADIAL PLY tires. Radial tires are designated by an “R” while a “-” represents a Bias constructed tire. For example, a 45/65-45 tire would be of Bias construction and a 45/65R45 would be of Radial construction. The following is a brief explanation of the principal features of these two constructions.
Bias Ply1. Beads – The tire beads consist of steel wirebundles
(3 or 4 in larger tires) which are forced laterally by tire inflation pressure to wedge the tire firmly on the rim’s tapered bead seat. The nylon plies tie into the bead bundles. The forces inherent in the tire are transmitted from the rim through the bead bundles into the nylon.
2. Body plies – Layers of rubber-cushioned nylon cord comprise the tire casing. Alternating plies of cord cross the tread centerline at an angle (bias). The term “ply rating” is an index of tire strength and not the actual number of tire plies.
3. Breakers or tread plies – These, if used, are confined to the tire’s tread area and are intended to improve casing strength and provide additional protection to the body plies. Some “work” tires employ steel breakers or belts to further protect the casing.
4. Sidewalls – These are the protective rubber layers covering the body plies in the sidewall.
5. Tread – The wearing part of the tire that contacts the ground. It transmits the machine weight to the ground and provides traction and flotation.
6. Inner liner – This is the sealing medium that retains the air and, combined with the “O” ring seal and rim base, eliminates the need for inner tubes and flaps.
7. Tubes and flaps (not shown) – Required if the tire is not of tubeless construction with an inner liner.
8. Undertread – Protective rubber cushion lying between tread and body ply.
32-2 Edition 44
Tires Tire Construction● Bias Ply
Bias Ply Construction
PHB-Sec32-14.indd 2PHB-Sec32-14.indd 2 12/20/13 9:14 AM12/20/13 9:14 AM
32
Radial Ply
1. Beads – A single bead bundle of steel cables or steel strip (spiraled like a clock spring) comprise the bead at each rim interface.
2. Radial casing – This consists of a single layer or ply of steel cables laid archwise (on the radian) bead to bead.
3. Belts – Several layers or plies of steel cable form the belts which underlie the tread area around the tire circumference. The cable in each belt crosses the tread centerline at an angle with the angle being reversed from the preceding belt.
4. Sidewalls.
5. Tread.
6. Undertread – Protective rubber cushion lying between tread and steel belts.
Bias and Radial Tire AdvantagesBias Radial
Tread Life X
Heat Resistance X
Cut Resistance — Tread X
Cut Resistance — Side Wall X X
Traction X
Flotation X
Stability X
Fuel Economy X
Repairability X
TIRE TYPESOff-the-road tires are classified by application in one
of the following three categories:
1. Transport tire – For earthmoving machines that transport material such as trucks and wheel tractors.
2. Work tire – Normally applied to slow moving earth-moving machines such as graders and loaders.
3. Load and carry – Wheel loaders engaged in transporting as well as digging.
TIRE SIZE NOMENCLATURETire size nomenclature is derived from the approximate
cross section width and rim diameter typically in the format of Tire Width, Aspect Ratio, and Rim Diameter (example: 45/65-45). Available tire types include:
1. A wide base tire has a section height to section width ratio in the range of 0.83. As an example, a 29.5-25 tire has an approximate cross section width of 749 mm (29.5") (first number) and a rim diameter of 635 mm (25") (second number).
2. A conventional tire has a section height to section width ratio in the range of 0.96. As an example, a 24.00R35 tire has an approximate cross section width of 610 mm (24") (first number) and a rim diameter of 889 mm (35") (second number).
3. A low profile tire has a section height to section width ratio in the range of 0.65. As an example, a 45/65-45 tire has an approximate cross section width of 1143 mm (45") (first number), a 65% aspect ratio designated as 65 (second number), and a rim diameter of 1143 mm (45") (third number).
If designated 45/65 R39, then the R denotes radial construction.
When comparing a wide base tire to a standard base tire, a larger first number on a wide base tire with the same rim diameter does not mean the wide base is larger in overall diameter. For example, the 18.00-25 conventional tire is larger in diameter than the 20.5-25 wide base tire. The 18.00-25 is comparable in overall diameter to the 23.5-25 wide base tire.
Edition 44 32-3
TiresTire Construction● Radial Ply
Tire TypesTire Size Nomenclature
Radial Ply Construction
PHB-Sec32-14.indd 3PHB-Sec32-14.indd 3 12/20/13 9:14 AM12/20/13 9:14 AM
D = Tire Overall DiameterR = Nominal Rim DiameterH = Tire Section HeightS = Tire Section WidthW = Tire Width (includes ornamental ribs)H
= Aspect RatioS
CODE IDENTIFICATION FOR OFF-HIGHWAY TIRES
The tire industry has adopted a code identification system to be used for off-the-road tires. This identification system will reduce the confusion caused by the trade names for each type of tire offered by each tire manufac-turer. The industry code identification is divided into six main categories by types of service as follows:
C — Compactor ServiceE — Earthmover ServiceG — Grader ServiceL — Loader and Dozer ServiceLS — Log-Skidder ServiceF — IndustrialR — Agricultural TractorI — Agricultural Implement
The sub-categories are designated by numerals, as follows:
Code Identification
Compactor% Tread
DepthC-1 Smooth 100C-2 Grooved 100
EarthmoverE-1 Rib 100E-2 Traction 100E-3 Rock 100E-4 Rock Deep Tread 150E-7 Flotation 80
GraderG-1 Rib 100G-2 Traction 100G-3 Rock 100G-4 Rock Deep Tread 150
Loader and DozerL-2 Traction 100L-3 Rock 100L-4 Rock Deep Tread 150L-5 Rock Extra Deep Tread 250L-3S Smooth 100L-4S Smooth Deep Tread 150L-5S Smooth Extra Deep Tread 250L-5/L-5S Half Tread Extra Deep 250
Log-SkiddersLS-1 Regular Tread 100LS-2 Intermediate Tread 125LS-3 Deep Tread 150HF-4 Extra Deep Tread 250
IndustrialF-3 Traction Tread
Agricultural TractorR-1 Regular TreadR-3 Shallow TreadR-4 Industrial Tractor
Agricultural ImplementI-3 Tractor Tread
32-4 Edition 44
Tires Off-Highway Tire Identification Codes
Tire cross-section
PHB-Sec32-14.indd 4PHB-Sec32-14.indd 4 12/20/13 9:14 AM12/20/13 9:14 AM
32
Edition 44 32-5
TiresManufacturer’s Designation
Tire and RimAssoc. Code Tread Type FIRESTONE
GOODYEAR/DUNLOP* BRIDGESTONE MICHELIN
CompactorC-1 Ribbed (Smooth
Surfaces)SMC-1A RR X LISSE COMPACTEUR
C-2 Traction (Regular) AL2Earthmover
E-1 Ribbed (Smooth Surfaces)
HRR-1AXDR-1A
E-2 Traction (Regular) SGG LD (E2/L2) Custom HI-MILLER (CHM) VFT X-CRANE ATMC-1A VGT XGCRL-2F (E2/G2) VHB XMH SSG Lug VHS XR B (E2/E3)SGL-2A VKT (E2/G2/L2) XR C4 (E2/E3)SGL E/L-2A (E2/G2/L2) VSB XSNOPLUS 170E
XTLA (E2/G2/L2)XVC
E-3 Rock (Regular) E67 AT-2A (E3/L3) RL (E3/G3/L3) XAD 65-1SRG LD GP-2B (E3/G3/L3) VEL XADN
GP-3D (E3/L3) VL2 (E3/L3) XDM C4HRL-3A (E3/L3) VLT XDR SHRL-3B VMT XK A (L3 for 25" Rim)HRL-3C VRD XMSHRL-3F VRF XR B/XRC4 (E2/E3)HRL D/L-3A (E3/G3/L3) VRL X-STRADDLEHRL E/L-3A (E3/G3/L3) WL X-TRACTION SRL-2+ (E3/G3/L3) XTSRL-3RL-3+RL-3F (E3/L3)RL-3J (E3/L3)RT-3A+RT-3B (E3/L3)SHRL (E3/L3)SHRL 8TL-3A+ (E3/L3)UMS D/L-3A (E3/L3)UMS-3A (E3/L3)WRL-3A (E3/L3)
*Dunlop brand indicator.
PHB-Sec32-14.indd 5PHB-Sec32-14.indd 5 12/20/13 9:14 AM12/20/13 9:14 AM
Tire and RimAssoc. Code Tread Type FIRESTONE
GOODYEAR/DUNLOP* BRIDGESTONE MICHELIN
EarthmoverE-4 Rock (Deep Tread) SRG DT GP-4B ELS2 X® SUPER TERRAIN AD
GP-4C (E4/L4) L317GP-4D (E4/L4) RLS (E4/L4) XDM™ BHRL-4A VELS XDR™HRL-4B VLTS (E4/L4) XDR™2MRL-4B VMTP XDT™MRL-4D VMTS (E4/G4) X-HAUL®
MRL-4F VRDP XKD1™NRL D/L-4A (E4/L4) VREP X-Quarry®/X-Quarry® SRL-4 VRLS XRS™RL-4A VRPS X-TRACTION™RL-4B VRQPRL-4F VSNT (E4/L4)RL-4C VZTPRL-4H VZTSRL-4H IIRL-4JRL-4J IIRL-4LRL-4M+RT-4ART-4A+
E-5 Rock (Extra-Deep Tread)
E-7 Flotation EAW-7A SCP2SAW-7A VSJSHY-7ASRB-7ASRB-7B
GraderG-1 Ribbed
(Smooth Surfaces)AWG-1ARBG-1ASMG-1A
G-2 Traction (Regular) SGG RB (G2/L2) AS-3A (G2/L3) FG (G2/L2) XGLA2™ (G2/L2)ASG-2A VKT (E2/G2/L2) XSNOPLUS® M&SRL-2F (E2/G2) VSW (G2/L2) (G2/L2)SG-2B VUT (G2/L2) XTLA™ (E2/G2/L2)SGG-2ASGG-2A SGSGL D/L-2A (G2/L2)SGL E/L-2A (E2/G2/L2)SP-T9* (G2/L2)
G-3 Rock (Regular) GP-2B (E3/G3/L3) RL (E3/G3/L3) XR™ A (G3/L3)HRL E/L-3A (E3/G3/L3)RKG-3ARKG-3CRL-2+ (E3/G3/L3)
G-4 Rock (Deep Tread) SRG DT RB SGG-4B
G-5 Rock (Extra-Deep Tread)
HRL D/L-5A
G-5S Smooth (Extra-Deep Tread)
SMO D/L-5A (G5S/L5S)SMO D/L-5B (G5S/L5S)
*Dunlop brand indicator.
32-6 Edition 44
Tires Manufacturer’s Designation
PHB-Sec32-14.indd 6PHB-Sec32-14.indd 6 12/20/13 9:14 AM12/20/13 9:14 AM
32
Edition 44 32-7
TiresManufacturer’s Designation
Tire and RimAssoc. Code Tread Type FIRESTONE
GOODYEAR/DUNLOP* BRIDGESTONE MICHELIN
Loader and DozerL-2 Traction (Regular) SGG LD (E2/L2) E91* FG (G2/L2) XF™
SGG RB (G2/L2) E91-2* VKT (E2/G2/L2) XGLA2™ (G2/L2)SGL D/L-2A (G2/L2) VSW (G2/L2) XSNOPLUS® M&SSGL E/L-2A (E2/G2/L2) VUT (G2/L2) (G2/L2)SP-T9* (G2/L2) XTLA™ (E2/G2/L2)
L-3 Rock (Regular) SRG LD AS-3A (G2/L3) RL (E3/G3/L3) STABIL'X® XAT-2A (E3/L3) VCH STACKER™ELV-3A (I3/L3) VJT STABIL'X® XZM™ 2GP-2B (E3/G3 /L3) VL2 (E3/L3) STABIL'X® XZM™GP-3D (E3/L3) VTS STABIL'X® XZSL®
HRL D/L-3A (G3/L3) XHA™HRL D/L-3B XHA™ 2HRL D/L-3C XK® A (E3 for 24" Rim)HRL E/L-3A (E3/G3/L3) XLD® L3HRL-3A (E3/L3) XR™ A (G3/L3)RL-2+ (E3/G3/L3) XRDN™ ARL-3F (E3/L3)RL-3J (E3/L3)RT-3B (E3/L3)SHRL (E3/L3)SHRL D/LTL-3A+ (E3/L3)UMS D/L-3A (E3/L3)UMS-3A (E3/L3)WRL-3A (E3/L3)
L-4 Rock (Deep Tread) DLDT AMS D/L-4/15C NL XLD® D1SRG DT LD AMS-4/5A RLS (E4/L4)
DMS D/L-4/15C VCHDDRL-4/15C VCHSGP-4C (E4/L4) VLTS (E4/L4)GP-4D (E4/L4) VSNLHRL D/L-4/15C VSNT (E4/L4)HRL D/L-4AHRL D/L-4BHRL D/L-4GNDL D/L-4/15CNRL D/L-4/15CNRL D/L-4A (E4/L4)NRL D/L-4DRL-4DRL-4KSHRL XT D/L
*Dunlop brand indicator.
PHB-Sec32-14.indd 7PHB-Sec32-14.indd 7 12/20/13 9:14 AM12/20/13 9:14 AM
32-8 Edition 44
Tires Manufacturer’s Designation
Tire and RimAssoc. Code Tread Type FIRESTONE
GOODYEAR/DUNLOP* BRIDGESTONE MICHELIN
Loader and DozerL-5 Rock (Extra-Deep
Tread)DLSDT AMS D/L-5/15C DL X MINE® D2SDT LD AMS D/L-5/8H VSDL XLD® D2Duraforce MH AMS D/L-5/9A VSDT
AMS-5/11FAMS-5/15CAMS-5/8FDMS D/L-5/15CDRL D/L-5AHRL D/L-5A (G5/L5)HRL D/L-5BHRL D/L-5CNDL D/L-5/15CNRL D/L-5/15CNRL D/L-5ARL-5KRT-5CSXT D/LSXT LDR
L-3S Smooth (Regular) PLTD Industrial RL-3S (Smooth)SMO D/L-3A (Smooth)
L-4S Smooth (Deep Tread) PLTD NSM D/L-4BPLTD UMS SMO D/L-4A
SMO D/L-4BSMO-4B
L-5S Smooth (Extra-Deep Tread)
PTLD Industrial NSM D/L-5B STMS XSM® D2+PTLD UMS RL-5S VSMSDLPT SM-5A
SMO D/L-5A (G5S/L5S)SMO D/L-5B (G5S/L5S)SMO D/L-5CSMO D/L-5DSMO-5ASMO-5BSMO-5CSMO-5D
L-6S Smooth (Extra-Deep Tread)
DuraWaste
L-5/L-5S Rock/Smooth (Extra-Deep Tread)
HTLD
*Dunlop brand indicator.
PHB-Sec32-14.indd 8PHB-Sec32-14.indd 8 12/20/13 9:14 AM12/20/13 9:14 AM
32
Edition 44 32-9
TiresManufacturer’s Designation
Tire and RimAssoc. Code Tread Type FIRESTONE
GOODYEAR/DUNLOP* BRIDGESTONE MICHELIN
Soil CompactorR-1 Ribbed (Smooth
Surfaces)Field and RoadPerformer 85Radial 23Radial 9100Radial All TractionSuper All TractionSuper All Traction IITraction Field and Road
R-3 Rock (Regular) All Non-Skid Tractor SFT105Farm Service DIATurf and Field
Log SkidderLS-1
LS-2 Intermediate Forestry Special CRC TGSForestry Special Severe
Service
LS-3 Deep
HF-4 Extra DeepBackhoe Loader
F-3 Industrial Multiple-Rib Industrial Special Laborer YS2
I-3 Traction All Traction UtilityPower ImplementSuper Traction Loader
I-4 Industrial
R-4 Drive Wheel, Industrial Tractor
All Traction Utility Industrial Sure Grip XM27™IT510 XM47™IT525 XMCL™SG Lug
Skid SteerSS Regular IT323
LSSGLSGL SS
High Speed CraneMCS Regular
*Dunlop brand indicator.
PHB-Sec32-14.indd 9PHB-Sec32-14.indd 9 12/20/13 9:14 AM12/20/13 9:14 AM
32-10 Edition 44
Tires
Tire and RimAssoc. Code Tread Type TITAN TRIANGLE EUROTIRE YOKOHAMA
CompactorC-1 Ribbed (Smooth Surfaces) Y69 (C1/I4/L4S/L5S)
C-2 Traction (Regular)
EarthmoverE-1 Ribbed (Smooth Surfaces) Y41
E-2 Traction (Regular) TGD2 (E2/L2) TB515 (E2/G2/L2) Y103 (E2/G2/L2)TB536 (E2/G2/L2)TB586TM518 (E2/L2)TL508 (E2/L2)
E-3 Rock (Regular) 007 MFT (E3/E4) TB516 (E3/L3) U-11 RB31 (E3/L3)CM100 TB526 U-12 RL31 (E3/L3)Grizz 1000 TB598 (E3/L3) RT31 (E3/L3)LCM TL528 (E3/L3) Y529MXL (E3/L3) TL559 Y565ND LCM TL568+ Y67 (E3/G3/I3/L3)ND LCM MCSSL 100STL2+STL3Super RiggerXG-3
E-4 Rock (Deep Tread) 007 MFT (E3/E4) TB516S DR004 RB41CH 150 (E4/L4) TB526S LR004 (E4/L4) RB42CM 150 TB598S ETRAC RL42DTE4 TL558S ETRAC ADT RL45 (E4/L4)DTH4 EROCK RT41 (E4/L4)ND Super LCM U-11 Y522 (E4/L4)Quarry Special U-12 Y523 (E4/I4)
CM 150 U-14 Y523R/USuper LCM Y530
Y567
E-5 Rock (Extra-Deep Tread)
E-7 Flotation Super Sand Flotation Y65Grader
G-1 Ribbed (Smooth Surfaces)
G-2 Traction (Regular) Grader HD (G2/L2) TB515 (E2/G2/L2) RT21HD 2000 II TB536 (E2/G2/L2) Y103 (E2/G2/L2)Loader Grader III Y25
(G2/L2)LSW G8LSuper Grader (G2/L2)TG2TGL2 (G2/L2)TGS2
G-3 Rock (Regular) Y67 (E3/G3/I3/L3)
G-4 Rock (Deep Tread)
G-5 Rock (Extra-Deep Tread)
G-5S Smooth (Extra-Deep Tread)
Manufacturer’s Designation
PHB-Sec32-14.indd 10PHB-Sec32-14.indd 10 12/20/13 9:14 AM12/20/13 9:14 AM
Edition 44 32-11
Tires
32
Tire and RimAssoc. Code Tread Type TITAN TRIANGLE EUROTIRE YOKOHAMA
Loader and DozerL-2 Traction (Regular) Grader HD (G2/L2) TB515 (E2/G2/L2) Y103 (E2/G2/L3)
Lift Rigger II TB536 (E2/G2/L2)Loader Dozer II TM518 (E2/L2)Loader Grader III TL508 (E2/L2)
(G2/L2)Super Grader (G2/L2)TGD2 (E2/L2)TGL2 (G2/L2)
L-3 Rock (Regular) LCM TB516 (E3/L3) F220 RB31 (E3/L3)LD 100 TB598 (E3/L3) RL31 (E3/L3)MXL (E3/L3) TL528 (E3/L3) RT31 (E3/L3)ND LCM Y526KSTL2+ (E3/L3) Y575STL3 (E3/L3) Y67 (E3/G3/I3/L3)Super Rigger (E3/L3)
L-4 Rock (Deep Tread) CH 150 (E4/L4) LR004 (E4/L4) RL45 (E4/L4)CM 150 RT41 (E4/L4)LD 150 Y522 (E4/L4)LS 150 Y545Super LCM Y67E
L-5 Rock (Extra-Deep Tread) LD 250 TL535S+ ETRAC WL Y524LD 250 Belted TL538S+ U-54 Y524Z
TL559S+ Y525
L-3S Smooth (Regular)
L-4S Smooth (Deep Tread) Super Smooth TSMS Y69 (C1/I4/L4S/L5S)Y69K (L4S/L5S)Y69U (L4S/L5S)
L-5S Smooth (Extra-Deep Tread) LD 250 Super Smooth TSMS+ Y69 (C1/I4/L4S/L5S)LD 250 Super Smooth Belted Y69K (L4S/L5S)LD 250 Super Smooth UGM Y69U (L4S/L5S)Super Smooth
L-6S Smooth (Extra-Deep Tread)
L-5/L-5S Rock/Smooth (Extra-Deep Tread)
LD 250 Half-TracLD250 Half-Trac Belted
Soil CompactorR-1 Ribbed (Smooth Surfaces)
R-3 Rock (Regular)Log Skidder
LS-1
LS-2 Intermediate Goodyear Logger Lug IIIGoodyear Logger Lug III HD
LS-3 Deep
HF-4 Extra Deep Goodyear Logger Lug III Flotation
Manufacturer’s Designation
PHB-Sec32-14.indd 11PHB-Sec32-14.indd 11 12/20/13 9:14 AM12/20/13 9:14 AM
32-12 Edition 44
Tires
Tire and RimAssoc. Code Tread Type TITAN TRIANGLE EUROTIRE YOKOHAMA
Backhoe LoaderF-3 Industrial Multiple-Rib Contractor
Goodyear LaborerGoodyear Multi RibIndustrial Front Tractor
I-3 Traction Contractor Y532Contractor II Y543Goodyear Sure Grip Implement Y67 (E3/G3/I3/L3)Goodyear Sure Grip Lug Y69PSGrizz LSW G2E Y92TI422
I-4 Industrial RL43RR41Y523 (E4/I4)Y69 (C1/I4/L4S/L5S)
R-4 Drive Wheel, Industrial Tractor
Goodyear IT510Goodyear IT515 HSGoodyear IT520Goodyear IT525Goodyear IT530Goodyear IT610Grizz LSWG99FIndustrial ContractorIndustrial Sure GripIndustrial TractorIndustrial Tractor LugIndustrial Tractor Lug II
Skid SteerSS Regular
High Speed CraneMCS Regular
Manufacturer’s Designation
PHB-Sec32-14.indd 12PHB-Sec32-14.indd 12 12/20/13 9:14 AM12/20/13 9:14 AM
Edition 44 32-13
Tires
32
Tire and RimAssoc. Code Tread Type NOKIAN BELSHINA PIRELLI DOUBLE COIN
CompactorC-1 Ribbed (Smooth Surfaces)
C-2 Traction (Regular)Earthmover
E-1 Ribbed (Smooth Surfaces)
E-2 Traction (Regular) F-92A (E2/E3/G2/L2) REM-15 (E2/L2)FBEL-199
E-3 Rock (Regular) Mine E-3 BEL-6 (E3/L3) RM94 REM-2 (E3/L3)BEL-51A RM95 REM-10 (E3/L3)BEL-160 RM99F-92A (E2/E3/G2/L2) RM100VF-76BMVF-166AM
E-4 Rock (Deep Tread) Armor Gard Mine BEL-102 RM95 REM-9Industrial Mine BEL-112 RM99 REM-11Nordman Mine E-4 BEL-153
BEL-156BEL-162BEL-170BEL-172BEL-174BEL-180BEL-182FBEL-150FT-115FT-116AM2FT-117
E-5 Rock (Extra-Deep Tread)
E-7 FlotationGrader
G-1 Ribbed (Smooth Surfaces)
G-2 Traction (Regular) F-92A (E2/E3/G2/L2) PN12 (G2/L2) REM-1FBEL-247-1 (G2/L2) PN14 (G2/L2)
G-3 Rock (Regular) F-120
G-4 Rock (Deep Tread)
G-5 Rock (Extra-Deep Tread)
G-5S Smooth (Extra-Deep Tread)
Manufacturer’s Designation
PHB-Sec32-14.indd 13PHB-Sec32-14.indd 13 12/20/13 9:14 AM12/20/13 9:14 AM
32-14 Edition 44
Tires
Tire and RimAssoc. Code Tread Type NOKIAN BELSHINA PIRELLI DOUBLE COIN
Loader and DozerL-2 Traction (Regular) Forest Rider F-92A (E2/E3/G2/L2) PN12 (G2/L2) REM-15
GRS FBEL-247-1 (G2/L2) PN14 (G2/L2)Loader GripLoader Grip 2TRI SteelTRI BackhoeTRI 2 80/75/70/65 SeriesTRI 2 Extreme TRI 2 Extreme Steel
L-3 Rock (Regular) Loader Grip 3 BEL-6 (E3/L3) RM94 REM-2 (E3/L3)BEL 26.42.38 RM99 REM-15 (E3/L3)BEL 32.48.75 RM100F-170
L-4 Rock (Deep Tread) Armor Gard FBEL-5FBEL-283
L-5 Rock (Extra-Deep Tread) PN12 (G2/L2) REM-12PN14 (G2/L2) REM-18
REM-19
L-3S Smooth (Regular) Mine L-3S
L-4S Smooth (Deep Tread) BEL-10M
L-5S Smooth (Extra-Deep Tread) Mine L-5SMine King L-5SNordman Mine L-5S
L-6S Smooth (Extra-Deep Tread)
L-5/L-5S Rock/Smooth (Extra-Deep Tread)
Soil CompactorR-1 Ribbed (Smooth Surfaces) BEL-111
R-3 Rock (Regular)Log Skidder
LS-1
LS-2 Intermediate Forest King TRS LS-2TRS LS-2 SF Excavator
LS-3 Deep
HF-4 Extra DeepBackhoe Loader
F-3 Industrial Multiple-Rib
I-3 Traction REM-6
I-4 Industrial
R-4 Drive Wheel, Industrial Tractor
Skid SteerSS Regular REM-3
High Speed CraneMCS Regular REM-8
Manufacturer’s Designation
PHB-Sec32-14.indd 14PHB-Sec32-14.indd 14 12/20/13 9:14 AM12/20/13 9:14 AM
32
Edition 44 32-15
TiresRadial Tire Identification● Michelin
RADIAL TIRE IDENTIFICATION
Code Identification for Michelin TiresAll Michelin earthmover tires are radial construction,
designated by the “X” marking. They contain a single steel radial ply with a series of steel belts placed around the tire’s circumference which reinforce and stabilize the tread.
Following are the tread designs currently available from Michelin with the different internal constructions depending on the application.
Type A4 Particularly resistant to cuts, tread tearing and abrasion on very rough surfaces.
Type A Particularly resistant to cuts, tread tearing and abrasion at average speeds which are higher than those for A4 (above).
Type B4 Compromise solution between abrasion resis-tance and average speed on rough surfaces (available in sizes 49 inch rim diameter and above).
Type B Higher resistance to internal heat genera-tion on surfaces which are not particularly rough.
Type C4 For running on long cycles at high speeds on well maintained roads.
Type C Very high resistance to high average speeds on long cycles run on well maintained roads.
The current combinations of tread patterns, con-struction, and tread depths offered, and primary TRA codes are:
Tread Design
Tread Compounds Primary TRA Code(s)A4 A B4 B C4 C
XDM™ X E-3XDM™ X E-4XDR™ X X X X X E-4XDR™ S X X E-3XDR™2 X X X X X E-4XDT™ X X X X E-4XK® X E-3/L-3XKD1™ X E-4XLD® D2 X L-5XMINE® D2 X L-5XMS™ X X E-3XRDN™ X L-3XR™ X G-3/L-3XR™ X X E-2/E-3XTLA™ X E-2/G-2/L-2X-TRACTION™ X X X E-4
Since Michelin radial tires contain a single steel casing ply, they utilize the industry method of designating radial tire strength in terms of “stars.” Their system consists of a one star, two star, and three star rating as an indication of the tire’s carrying capacity. The one star is the lightest construction, generally used on work and slow moving transport machines. Two star tires are used on most medium and high speed transport machines. Three star construction provides the greatest carrying capacity for a given size and is only available in small standard base tires.
This combination of tread designs and types of con-struction provides a range of radial tires which cover most earthmoving applications. We recommend that in applying steel radial tires to your machines you provide all site condition data to the tire manufacturer. Obtain their recommendations as to which tire will provide the most economical operation.
PHB-Sec32-14.indd 15PHB-Sec32-14.indd 15 12/20/13 9:14 AM12/20/13 9:14 AM
32-16 Edition 44
Tires Radial Tire Identification● Goodyear
Code Identification for Goodyear Radial TiresAll Goodyear steel radial earthmover tires have been
designated Unisteel followed by a three or four digit alpha-numeric code that identifies the particular tread. For example, for a RL-2+, RL stands for Rock Lug and indicates that the upper sidewall has rock protection. The number in the code corresponds to the tire industry identification system (2-traction, 3-rock, etc). The fourth digit, if any, is used to designate tread design differences for the same basic tread type.
Following are the radial tread designs currently available from Goodyear with the compound and construction types depending on the application.
Compound Description Compound CodeHeat Resistant 2Standard Abrasion Resistant 4Ultra Abrasion Resistant 6
Construction Description Construction CodeStandard SHeavy Duty HExtra Heavy Duty HWSteel Breakers JHeavy Undertread ULow Angle Belts SL
Tread DesignTread Compounds
Primary TRA Code(s)2S 4S 6SAT-2A X X X E-3/L-3GP-2B X X X E-3/G-3/L-3GP-3D X X X E-3/L-3GP-4B X X X E-4GP-4B AT X X X E-4/G-4GP-4C X X X E-4/G-4/L-4GP-4D X X X E-4/L-4RL-2+ X X X E-3/G-3/L-3RL-2F X X X E-2/G-2/L-2RL-3 X X X E-3RL-3+ X X X E-3RL-3A X X X E-3RL-3F X E-3/L-3RL-3J X X E-3RL-4 X X X E-4RL-4A X X X E-4RL-4B X X X E-4RL-4C X X X E-4RL-4F X X X E-4RL-4H X X X E-4RL-4H II X X X E-4RL-4J X X X E-4RL-4J II X X X E-4RL-4K X X L-4RL-4M+ X X X E-4RL-5K X X L-5RM-4A+ X X X E-4RT-3A+ X X X E-3RT-3B X L-3RT-4A X X X E-4RT-4A+ X X X E-4TL-3A+ X X X E-3/L-3
A star rating system instead of the ply rating system indicates the casing strength of radial tires. These symbols indicate the recommended inflation for a particular tire load. Following the star rating code is Goodyear’s Custom Compound and Construc tion code. For a tire designated “2S” the 2 indicates a heat resistant compound and the S indicates standard construction. The higher the number the greater the abrasion and cut resistance with a corre-sponding lower TKPH/TMPH rating.
PHB-Sec32-14.indd 16PHB-Sec32-14.indd 16 12/20/13 9:14 AM12/20/13 9:14 AM
32
Edition 44 32-17
TiresRadial Tire Identification● Bridgestone
Code Identification for Bridgestone Radial TiresThe Bridgestone steel radial earthmover has been
designated as V-Steel. Following are the radial tread designs currently available from Bridgestone with the compound and construction types depending on the application.
Bridgestone Compound and Structure Codes1A Standard2A Cut-Resistant2V Special Cut Resistant (Steel Breaker)2Z Special Cut Resistant (Side Steel Breaker)3A Heat-ResistantE EarthmoverG GraderD Loader and DozerS Logging
Tread Design Tread Name
Tread Compounds Primary TRA
Code(s)1A 2A 2V 3AVEL V-Steel E-Lug X X X E-3VELS V-Steel E-Lug S X X X E-4VELSL V-Steel E-Lug S X E-4VFT V-Steel F-Traction X X X E-2VHS V-Steel H-Service X E-2VJT V-Steel J-Traction X E-3/L-3VKT V-Steel K-Traction X X E-2/G-2/L-2VLT V-Steel L-Traction X X E-3/L-3VLTS V-Steel L-Traction S X E-4/L-4VMT V-Steel M-Traction X X X E-3/L-3VMTP V-Steel M-Traction
Premium X X X E-4VMTS V-Steel M-Traction S X X X E-4/G-4VRDP V-Steel Rock Deep
Premium X X X E-4VREP V-Steel Rock
E-Premium X X X E-4VRF V-Steel Rock Fast X X E-3VRL V-Steel R-Lug X X E-3VRLS V-Steel R-Lug S X X X E-4VRPS V-Steel Rock Premium
Service X X X E-4VRQP V-Steel Rock Quarry
Premium X E-4VSB V-Steel S-Block X E-2VSDL V-Steel D-Lug X L-5VSDT V-Steel Super Deep
Traction X L-5VSMS V-Steel Smooth
Tread-MS X X L-5SVSNL V-Steel N-Lug X L-4VSNT V-Steel N-Traction X E-4/L-4VSW V-Steel Snow Wedge X G-2/L-2VTS V-Steel Traction-
Stability X L-3VUT V-Steel Ultra Traction X G-2/L-2VZTP V-Steel Z-Traction
Premium X X X E-4VZTS V-Steel Z-Traction S X X X E-4
The casing strength, i.e., load carrying capacity of tire is indicated by star rating system; 1-star, 2-star and 3-star. Bridgestone’s Off-the-Road tires are designed and produced to meet the commonly accepted international standards, those set by the TRA (Tire and Rim Associa-tion) in the U.S.A., by the ETRTO (European Tire and Rim Technical Organization) in Europe and/or by the JATMA (Japan Automobile Tire Manufacturers’ Asso-ci a tion) in Japan. Where differences exist between the TRA, ETRTO and JATMA standards, Bridgestone selects the most appropriate.
Code Identification for Eurotire Radial and Bias TiresEurotire manufactures a range of bias-ply and radial
tires for use on mining equipment. Eurotire steel radial tires are designated with an “EU.” The following are the radial tread designs currently available from Eurotire with the compound and construction types for a variety of applications.
Compound Description Compound CodeHeat Resistant HIntermediate SAbrasion Resistant A
Compound Code
Tread Design H S A TRA Code(s)EUROK X X X E4EUTRAK – X X E3, E4, L4
Eurotire radial tires are marked with a star rating system to indicate casing strength. Eurotire manufactures 2 star radial tires.
It is important to understand the specific usage and operating conditions of your job site so that the most appropriate tire choice can be determined. Eurotire rep-resentatives can help you make the most informed deci-sion regarding tire choice, including weighing the benefits of radial vs. bias, selecting between different tread designs and compounds and providing service solutions to best suit your specific needs.
PHB-Sec32-14.indd 17PHB-Sec32-14.indd 17 12/20/13 9:14 AM12/20/13 9:14 AM
TON-KILOMETER PER HOUR (TKPH)Tire selection and machine operating practices have,
in some cases, become the critical factors in the over-all success of earthmoving ventures. One of the most serious problems occur when tires are operated at temperatures above their capabilities. Separa tion and related failures occur. To help you avoid temperature related failures, Caterpillar has been instru mental in developing the Ton-Kilometer Per Hour (TKPH), also known as Ton-Mile Per Hour (TMPH), method of rating tires. The formula to convert a TKPH rating to a TMPH rating is:
TMPH = TKPH × 0.685
Heat and Tire FailureTire manufacturing requires heat in the vulcanizing
process converting crude rubber and additives into a homogeneous compound. The heat required is typically above 132° C (270° F).
A tire also generates heat as it rolls and flexes. Heat generated faster than it can be radiated into the atmosphere gradually builds within the tire and reaches maximum level at the outermost ply or belt.
Over time, enough heat can develop from overflexing to actually reverse the vulcanizing process or “revert” the rubber causing ply separation and tire failure. Only a brief time at reversion temperature initiates the failure. Experience shows that few pure heat sep aration cases occur. Most so-called heat separations are in tires operating below the reversion level.
As a tire’s operating temperature increases the rubber and textiles within significantly lose strength. The tire becomes more susceptible to failures from cornering, braking, impact, cut through, fatigue and heat separation. If operating tires at higher tempera tures is absolutely necessary, it is essential the machines be operated to reduce the probability of premature tire failure. No hard cornering without superelevation, no panic braking, etc.
The TKPH formula was developed to predict tire temperature buildup. The system is a method of rating tires in proportion to the amount of work they can do from a temperature standpoint. It utilizes the product of load × speed to derive an index of the tire temperature buildup. Even at or below a tire’s TKPH, failures may be initiated by overstressing the tires.
It is possible by using a needle type pyrometer to measure temperature at any desired point within the tire casing. However, the instrumentation and the technique does not lend itself to general field use. The greatest difficulty is locating the thickest (therefore the hottest) tread bar in any given tire using giant calipers. The tire must then be drilled along the centerline of this bar from shoulder to shoulder at 52 mm (2") intervals. These 3.18 mm (1/8") diameter holes extend down through the tread and undertread to the topmost reinforcement. This procedure is fully described under SAE Recommended practice J1015.
The TKPH rating system as given in this SAE specifica-tion is approved by most tire manufacturers. Michelin, in addition to providing TKPH ratings has developed their own speed/load carrying rating system and we recommend that Michelin be consulted where high tire temperatures are a concern.
Heat generation in a specific tire at recommended pressure depends on three factors:
● the weight the tire is carrying (flex per revolution),● the speed the tire is traveling over the ground (flexures
over a period of time), and● the air temperature surrounding the tire (ambient
temperature) and road surface temperature.Once a tire manufacturer has determined a tire’s tem-
perature characteristics and expressed them in TKPH, the above listed specific job conditions can be used to determine any tire’s maximum work capacity. These conditions provide on site ability to predict and avoid costly tire separations.
32-18 Edition 44
Tires Ton-Kilometer Per Hour Rating System
PHB-Sec32-14.indd 18PHB-Sec32-14.indd 18 12/20/13 9:14 AM12/20/13 9:14 AM
32
Edition 44 32-19
TiresTon-Kilometer Per Hour Rating SystemTire Drive-Away Recommendations
Ton-Kilometer-Per-Hour Rating SystemThe tire TKPH can be matched to the site TKPH as
well as compared with TKPH values of different makes and types of tires.TKPH Job Rate
Average Tire Load × Average Speed for the shiftAverage Tire Load
“Empty” tire load + “loaded” tire load2
Average SpeedRound trip distance in kilometers
× number of tripsTotal Hours (in the shift)
For excessive haul length (32 kilometers or more) consult your tire representative for modification to the TKPH value.
To use in the United States Customary System, change kilometers to miles and use short tons.
It should be noted that prolonged operation at high casing temperatures can fatigue the nylon at the flex points in the sidewalls.
The following are the most recent TKPH ratings as made available by Goodyear, Michelin and Bridgestone, and are subject to change on their part at any time. Other tire manufacturers’ TKPH ratings will be included in future handbook editions when and if made available. For latest TKPH ratings, consult specific tire manufacturer at time of machine and/or tire purchase.
Load-and-Carry TKPHThe wheel loader, when used in load-and-carry appli-
cations, may encounter temperature problems similar to those normally associated only with tires on scrapers, trucks and wagons. Do not place the vehicle in load-and-carry applications without first consulting the tire manu-facturer, or obtain ing maximum load and speed ratings and pres sure recommendations from the tire manufacturer.
Conventional and Radial Steel Cord Tire OptionsTire options now provide types to operate in conditions
ranging from rock and abrasive materials, to jobs with high speed hauls in good materials.
The best tire type can be different for the drive tires than for other tires on the same machine. TKPH should be calculated for all tires.
TIRE DRIVE-AWAY RECOMMENDATIONSHeat separation can be a problem during machine
delivery and moving machines from one job to another. Whenever roading earthmoving machines, check your supplier for the tire manufacturer’s recommended speed limitations on the specific tires involved.
Some tire manufacturers also recommend that vehicles equipped with extra tread depth or special compounded tires should not be roaded without their specific approval. Our tests support this recommendation, especially for L-3, L-4, E-4 and L-5 tires.
PHB-Sec32-14.indd 19PHB-Sec32-14.indd 19 12/20/13 9:14 AM12/20/13 9:14 AM
32-20 Edition 44
Tires TKPH Rating● Goodyear Tires
TKPH RATINGSAT 38° C (100° F) AMBIENT TEMPERATURE
For Haul Lengths of 32 km (20 miles) or Less One WayMaximum Speed Not to Exceed 48 km (30 miles) per Hour
GOODYEAR RADIAL PLY — CONVENTIONAL SIZESIndustry
Code E-3
Tread Design AT-2A AT-3A GP-2B RL-3 RL-3+ RL-3A RL-3J
Custom Code 2S 4S 6S 2S 4S 6S 2S 4S 6S 2S 4S 6S 2S 4S 6S 2S 4S 6S 2S 4S 6S
14.00R20 TKPH — — —
16.00R20 TKPH — — — — — —
16.00R21 TKPH — — —
12.00R24 TKPH
13.00R24 TKPH
14.00R24 TKPH — — —
16.00R24 TKPH
14.00R25 TKPH — — —
16.00R25 TKPH — — — 115 85 70
18.00R25 TKPH 155 115 95
18.00R33 TKPH 180 135 110
21.00R33 TKPH
21.00R35 TKPH 245 185 145
24.00R35 TKPH 300 230 180
24.00R49 TKPH 375 280 —
27.00R49 TKPH 450 375 — 375 310 185
30.00R51 TKPH
33.00R51 TKPH 620 480 290
36.00R51 TKPH 685 515 375 525 450 270
37.00R57 TKPH
40.00R57 TKPH 785 600 355
37.00R57 TKPH
Because of the variance between specific tires it is recommended that at the time of purchase you check with your tire supplier for the manufacturer’s specific TKPH ratings for the tires purchased.
PHB-Sec32-14.indd 20PHB-Sec32-14.indd 20 12/20/13 9:14 AM12/20/13 9:14 AM
32
Edition 44 32-21
TiresTKPH Rating● Goodyear Tires
TKPH RATINGSAT 38° C (100° F) AMBIENT TEMPERATURE
For Haul Lengths of 32 km (20 miles) or Less One WayMaximum Speed Not to Exceed 48 km (30 miles) per Hour
GOODYEAR RADIAL PLY — CONVENTIONAL SIZESIndustry
Code E-4
Tread Design GP-4B GP-4C GT-4B RL-4 RL-4A RL-4B RL-4C
Custom Code 2S 4S 6S 2S 4S 6S 2S 4S 6S 2S 4S 6S 2S 4S 6S 2S 4S 6S 2S 4S 6S
14.00R20 TKPH
16.00R20 TKPH
16.00R21 TKPH
12.00R24 TKPH
13.00R24 TKPH
14.00R24 TKPH
16.00R24 TKPH
14.00R25 TKPH
16.00R25 TKPH
18.00R25 TKPH 125 95 75 130 100 80
18.00R33 TKPH — — — 150 115 90 155 120 90
21.00R33 TKPH 205 160 127
21.00R35 TKPH — — —
24.00R35 TKPH 260 200 155 270 205 160
24.00R49 TKPH — 260 — — — —
27.00R49 TKPH 370 285 215 360 275 210 425 335 — 350 270 210 375 290 225
30.00R51 TKPH
33.00R51 TKPH 490 370 260 470 360 250
36.00R51 TKPH
37.00R57 TKPH 550 415 265
40.00R57 TKPH 785 600 355 865 660 390
37.00R57 TKPH 615 460 295
Because of the variance between specific tires it is recommended that at the time of purchase you check with your tire supplier for the manufacturer’s specific TKPH ratings for the tires purchased.
PHB-Sec32-14.indd 21PHB-Sec32-14.indd 21 12/20/13 9:14 AM12/20/13 9:14 AM
32-22 Edition 44
Tires TKPH Rating● Goodyear Tires
TKPH RATINGSAT 38° C (100° F) AMBIENT TEMPERATURE
For Haul Lengths of 32 km (20 miles) or Less One WayMaximum Speed Not to Exceed 48 km (30 miles) per Hour
GOODYEAR RADIAL PLY — CONVENTIONAL SIZESIndustry
Code E-4
Tread Design RL-4F RL-4H RL-4HII RL-4J RL-4JII RL-4K RL-4L
Custom Code 2S 4S 6S 2S 4S 6S 2S 4S 6S 2S 4S 6S 2S 4S 6S 2S 4S 6S 2S 4S 6S
14.00R20 TKPH
16.00R20 TKPH
16.00R21 TKPH
12.00R24 TKPH 75 55 —
13.00R24 TKPH
14.00R24 TKPH 85 65 — — — — — — —
16.00R24 TKPH
14.00R25 TKPH 85 65 — — — —
16.00R25 TKPH
18.00R25 TKPH 130 100 —
18.00R33 TKPH 140 105 85 155 120 90 155 120 90
21.00R33 TKPH 215 165 130
21.00R35 TKPH 200 150 120 215 165 130 215 165 130 215 165 130
24.00R35 TKPH 245 185 145 270 205 160 270 205 160 270 205 160
24.00R49 TKPH 320 245 190
27.00R49 TKPH 345 265 200 375 300 180 375 300 180
30.00R51 TKPH 450 340 205 410 310 185
33.00R51 TKPH 470 360 250 470 360 250 520 395 270
36.00R51 TKPH 565 490 300 515 445 270
37.00R57 TKPH 655 490 315 550 410 245 620 480 290
40.00R57 TKPH
37.00R57 TKPH
Because of the variance between specific tires it is recommended that at the time of purchase you check with your tire supplier for the manufacturer’s specific TKPH ratings for the tires purchased.
PHB-Sec32-14.indd 22PHB-Sec32-14.indd 22 12/20/13 9:14 AM12/20/13 9:14 AM
32
Edition 44 32-23
TiresTKPH Rating● Goodyear Tires
TKPH RATINGSAT 38° C (100° F) AMBIENT TEMPERATURE
For Haul Lengths of 32 km (20 miles) or Less One WayMaximum Speed Not to Exceed 48 km (30 miles) per Hour
GOODYEAR RADIAL PLY — CONVENTIONAL SIZESIndustry
Code E-4 E-5
Tread Design RL-4M+ RM-4A+ RT-4A RT-4A+ RL-5K
Custom Code 2S 4S 6S 2S 4S 6S 2S 4S 6S 2S 4S 6S 2S 4S 6S
14.00R20 TKPH
16.00R20 TKPH
16.00R21 TKPH
12.00R24 TKPH
13.00R24 TKPH
14.00R24 TKPH — — —
16.00R24 TKPH
14.00R25 TKPH
16.00R25 TKPH
18.00R25 TKPH
18.00R33 TKPH 160 125 94
21.00R33 TKPH
21.00R35 TKPH
24.00R35 TKPH 275 210 165
24.00R49 TKPH
27.00R49 TKPH 410 320 250 410 320 250
30.00R51 TKPH
33.00R51 TKPH 540 410 290 540 410 285
36.00R51 TKPH
37.00R57 TKPH 770 590 350 770 590 350
40.00R57 TKPH
37.00R57 TKPH
Because of the variance between specific tires it is recommended that at the time of purchase you check with your tire supplier for the manufacturer’s specific TKPH ratings for the tires purchased.
PHB-Sec32-14.indd 23PHB-Sec32-14.indd 23 12/20/13 9:14 AM12/20/13 9:14 AM
32-24 Edition 44
Tires
TKPH RATINGSAT 38° C (100° F) AMBIENT TEMPERATURE
For Haul Lengths of 32 km (20 miles) or Less One WayMaximum Speed Not to Exceed 48 km (30 miles) per Hour
GOODYEAR RADIAL PLY — WIDE BASE SIZESIndustry
Code E-3
Tread Design AT-2A GP-2B GP-3D RL-2+ RL-3 RL-3F RL-3J
Custom Code 2S 4S 6S 2S 4S 6S 2S 4S 6S 2S 4S 6S 2S 4S 6S 2S 4S 6S 2S 4S 6S
15.5R25 TKPH — — —
17.5R25 TKPH 130 75 65 135 105 95 100 75 — 85 — —
20.5R25 TKPH 150 115 105 120 90 —
23.5R25 TKPH 175 135 115 175 135 115 135 100 —
26.5R25 TKPH 195 155 130 155 115 —
29.5R25 TKPH 235 185 155 185 140 —
29.5R29 TKPH 210 160 — 185 — —
33.25R29 TKPH
33.25R35 TKPH — 210 — — 210 — — 230 —
37.25R35 TKPH — 260 —
37.5R39 TKPH — — — — 295 —
Industry Code E-3 E-4
Tread Design RT-3A RT-3A+ TL-3A+ GP-4B GP-4B AT GP-4C GP-4D GT-4A
Custom Code 2S 4S 6S 2S 4S 6S 2S 4S 6S 2S 4S 6S 2S 4S 6S 2S 4S 6S 2S 4S 6S 2S 4S 6S
15.5R25 TKPH
17.5R25 TKPH 100 75 —
20.5R25 TKPH 120 90 — — — — — — —
23.5R25 TKPH 135 100 — — — — 135 104 90 — — — — — —
26.5R25 TKPH 155 115 — 147 109 91 — — —
29.5R25 TKPH 185 145 125 165 130 105 170 135 115 — — —
29.5R29 TKPH
33.25R29 TKPH 285 220 —
33.25R35 TKPH
37.25R35 TKPH — — —
37.5R39 TKPH
TKPH Rating● Goodyear Tires
Because of the variance between specific tires it is recommended that at the time of purchase you check with your tire supplier for the manufacturer’s specific TKPH ratings for the tires purchased.
PHB-Sec32-14.indd 24PHB-Sec32-14.indd 24 12/20/13 9:14 AM12/20/13 9:14 AM
Edition 44 32-25
Tires
32
TKPH RATINGSAT 38° C (100° F) AMBIENT TEMPERATURE
For Haul Lengths of 32 km (20 miles) or Less One WayMaximum Speed Not to Exceed 48 km (30 miles) per Hour
GOODYEAR RADIAL PLY — 95 SERIES SIZESIndustry
Code E-3
Tread Design AS-3A GP-2B
Custom Code 2S 4S 6S 2S 4S 6S
385/95R24 TKPH — — —
385/95R25 TKPH — — — — — —
445/95R25 TKPH — — —
TKPH RATINGSAT 38° C (100° F) AMBIENT TEMPERATURE
For Haul Lengths of 32 km (20 miles) or Less One WayMaximum Speed Not to Exceed 48 km (30 miles) per Hour
GOODYEAR RADIAL PLY — 90 SERIES SIZESIndustry
Code E-4
Tread Design RL-4B RM-4A+
Custom Code 2S 4S 6S 2S 4S 6S
46/90R57 TKPH 910 690 410 980 750 440
TKPH Rating● Goodyear Tires
Because of the variance between specific tires it is recommended that at the time of purchase you check with your tire supplier for the manufacturer’s specific TKPH ratings for the tires purchased.
Because of the variance between specific tires it is recommended that at the time of purchase you check with your tire supplier for the manufacturer’s specific TKPH ratings for the tires purchased.
PHB-Sec32-14.indd 25PHB-Sec32-14.indd 25 12/20/13 9:14 AM12/20/13 9:14 AM
32-26 Edition 44
Tires
TKPH RATINGSAT 38° C (100° F) AMBIENT TEMPERATURE
For Haul Lengths of 32 km (20 miles) or Less One WayMaximum Speed Not to Exceed 48 km (30 miles) per Hour
GOODYEAR RADIAL PLY — 80 SERIES SIZESIndustry
Code E-1 E-2 E-3 E-4
Tread Design HRR-1A SP-T9 GP-2B RM-3A RM-4A+
Custom Code 2S 4S 6S 2S 4S 6S 2S 4S 6S 2S 4S 6S 2S 4S 6S
335/80R18 TKPH — — — — — —
395/80R25 TKPH — — —
445/80R25 TKPH — — —
525/80R25 TKPH — — —
605/80R25 TKPH — — —
53/80R63 TKPH 1200 — — 1070 — —
59/80R63 TKPH 1500 — — 1300 — —
TKPH RATINGSAT 38° C (100° F) AMBIENT TEMPERATURE
For Haul Lengths of 32 km (20 miles) or Less One WayMaximum Speed Not to Exceed 48 km (30 miles) per Hour
GOODYEAR RADIAL PLY — 75 SERIES SIZESIndustry
Code E-3
Tread Design GP-2B RT-3A+
Custom Code 2S 4S 6S 2S 4S 6S
40.5/75R39 TKPH 400 305 240 375 290 220
TKPH Rating● Goodyear Tires
Because of the variance between specific tires it is recommended that at the time of purchase you check with your tire supplier for the manufacturer’s specific TKPH ratings for the tires purchased.
Because of the variance between specific tires it is recommended that at the time of purchase you check with your tire supplier for the manufacturer’s specific TKPH ratings for the tires purchased.
PHB-Sec32-14.indd 26PHB-Sec32-14.indd 26 12/20/13 9:14 AM12/20/13 9:14 AM
Edition 44 32-27
Tires
32
TKPH RATINGSAT 38° C (100° F) AMBIENT TEMPERATURE
For Haul Lengths of 32 km (20 miles) or Less One WayMaximum Speed Not to Exceed 48 km (30 miles) per Hour
GOODYEAR RADIAL PLY — 65 SERIES SIZESIndustry
Code E-3 E-4
Tread Design AT-2A GP-3D RL-2+ RL-3F TL-3A+ GP-4D
Custom Code 2S 4S 6S 2S 4S 6S 2S 4S 6S 2S 4S 6S 2S 4S 6S 2S 4S 6S
555/65R25 TKPH 195 — —
600/65R25 TKPH 132 99 66
650/65R25 TKPH 144 108 73 — 125 —
750/65R25 TKPH 162 120 78 155 115 75 — — —
775/65R29 TKPH 169 125 105
800/65R29 TKPH 169 125 105
875/65R29 TKPH 185 150 121
TKPH Rating● Goodyear Tires
Because of the variance between specific tires it is recommended that at the time of purchase you check with your tire supplier for the manufacturer’s specific TKPH ratings for the tires purchased.
PHB-Sec32-14.indd 27PHB-Sec32-14.indd 27 12/20/13 9:14 AM12/20/13 9:14 AM
32-28 Edition 44
Tires
TKPH RATINGSAT 38° C (100° F) AMBIENT TEMPERATURE
For Haul Lengths of 32 km (20 miles) or Less One WayMaximum Speed Not to Exceed 48 km (30 miles) per Hour
GOODYEAR BIAS PLY — CONVENTIONAL SIZESIndustry
Code E-1 E-3
Tread Design HRR-1A GP-2B HRL-3A WRL-3A
Custom Code 2S 4S 6S 2S 4S 6S 2S 4S 6S 2S 4S 6S
9.00-15 TKPH
9.00-16 TKPH
16.00-16 TKPH
12.00-20 TKPH — — —
14.00-20 TKPH — — — — — —
16.00-20 TKPH
12.00-24 TKPH — — —
14.00-24 TKPH — — — — — —
16.00-24 TKPH — — —
14.00-25 TKPH — 50 —
16.00-25 TKPH 125 90 — — — — — 70 —
18.00-25 TKPH 145 100 — 125 90 —
21.00-25 TKPH — — —
18.00-33 TKPH 150 110 —
21.00-35 TKPH 200 145 —
24.00-35 TKPH — 175 —
21.00-49 TKPH
24.00-49 TKPH
27.00-49 TKPH
30.00-51 TKPH
33.00-51 TKPH
36.00-51 TKPH
TKPH Rating● Goodyear Tires
Because of the variance between specific tires it is recommended that at the time of purchase you check with your tire supplier for the manufacturer’s specific TKPH ratings for the tires purchased.
PHB-Sec32-14.indd 28PHB-Sec32-14.indd 28 12/20/13 9:14 AM12/20/13 9:14 AM
Edition 44 32-29
Tires
32
TKPH RATINGSAT 38° C (100° F) AMBIENT TEMPERATURE
For Haul Lengths of 32 km (20 miles) or Less One WayMaximum Speed Not to Exceed 48 km (30 miles) per Hour
GOODYEAR BIAS PLY — CONVENTIONAL SIZESIndustry
Code E-4 E-7
Tread Design HRL-4B HRL-4D MRL-4B MRL-4D PVG-7A SRB-7A
Custom Code 2S 4S 6S 2S 4S 6S 2S 4S 6S 2S 4S 6S 2S 4S 6S 2S 4S 6S
9.00-15 TKPH — — —
9.00-16 TKPH — — —
16.00-16 TKPH — — —
12.00-20 TKPH
14.00-20 TKPH — — —
16.00-20 TKPH — — —
12.00-24 TKPH
14.00-24 TKPH
16.00-24 TKPH — — —
14.00-25 TKPH
16.00-25 TKPH 90 65 —
18.00-25 TKPH — 80 — 74 — — — 160 —
21.00-25 TKPH — 185 —
18.00-33 TKPH — 100 85
21.00-35 TKPH 180 130 110 — 115 —
24.00-35 TKPH — 160 — — 140 —
21.00-49 TKPH — 160 —
24.00-49 TKPH — 190 165 — 165 — 234 175 —
27.00-49 TKPH 310 235 175 — 190 —
30.00-51 TKPH — 265 — — 245 —
33.00-51 TKPH 395 300 —
36.00-51 TKPH 465 335 — 450 — — — 325 —
TKPH Rating● Goodyear Tires
Because of the variance between specific tires it is recommended that at the time of purchase you check with your tire supplier for the manufacturer’s specific TKPH ratings for the tires purchased.
PHB-Sec32-14.indd 29PHB-Sec32-14.indd 29 12/20/13 9:14 AM12/20/13 9:14 AM
32-30 Edition 44
Tires TKPH Rating● Goodyear Tires
TKPH RATINGSAT 38° C (100° F) AMBIENT TEMPERATURE
For Haul Lengths of 32 km (20 miles) or Less One WayMaximum Speed Not to Exceed 48 km (30 miles) per Hour
GOODYEAR BIAS PLY — WIDE BASE SIZESIndustry
Code E-2 E-3
Tread Design SGL E/L-2A HRL E/L-3A HRL-3A HRL-3F SHRL SHRL8
Custom Code 2S 4S 6S 2S 4S 6S 2S 4S 6S 2S 4S 6S 2S 4S 6S 2S 4S 6S
20.5-25 TKPH — — — — — — — 65 —
23.5-25 TKPH — — — — — — — 70 —
26.5-25 TKPH — 90 —
29.5-25 TKPH — 115 — — 115 —
26.5-29 TKPH — 110 —
29.5-29 TKPH 175 125 — 175 125 —
33.5-33 TKPH — 160 — — — — — 170 —
37.5-33 TKPH — 210 — — 220 —
33.25-35 TKPH — 160 — — — —
37.25-35 TKPH — 210 — — 220 —
29.5-35 TKPH — 145 — — 160 —
37.5-39 TKPH — 225 — — 240 —
TKPH RATINGSAT 38° C (100° F) AMBIENT TEMPERATURE
For Haul Lengths of 32 km (20 miles) or Less One WayMaximum Speed Not to Exceed 48 km (30 miles) per Hour
GOODYEAR BIAS PLY — 65 SERIES SIZESIndustry
Code E-4
Tread Design NRL D/L-4A
Custom Code 2S 4S 6S
35/65-33 TKPH 115 95 75
Because of the variance between specific tires it is recommended that at the time of purchase you check with your tire supplier for the manufacturer’s specific TKPH ratings for the tires purchased.
Because of the variance between specific tires it is recommended that at the time of purchase you check with your tire supplier for the manufacturer’s specific TKPH ratings for the tires purchased.
PHB-Sec32-14.indd 30PHB-Sec32-14.indd 30 12/20/13 9:14 AM12/20/13 9:14 AM
Edition 44 32-31
Tires
32
TKPH Rating● Bridgestone Tires
TKPH RATINGSAT 38° C (100° F) AMBIENT TEMPERATURE
For Haul Lengths of 32 km (20 miles) or Less One WayMaximum Speed Not to Exceed 48 km (30 miles) per Hour
BRIDGESTONE RADIAL PLY — CONVENTIONAL SIZESIndustry
Code E-2 E-3
Tread Design VFT VHS VKT VSB VEL VMT VRL
Custom Code 3A 1A 2A 3A 1A 3A 1A 2A 2A 3A 1A 2A 3A 1A 2A 3A 1A 2A
11.00R20 TKPH
12.00R20 TKPH
16.00R20 TKPH
12R22.5 TKPH
12.00R24 TKPH
13.00R24 TKPH
14.00R24 TKPH — —
16.00R24 TKPH
14.00R25 TKPH —
16.00R25 TKPH
18.00R25 TKPH 183 183 — — —
21.00R25 TKPH
18.00R33 TKPH 328 281 227 328 281 227 307 263 213 307 263 213
21.00R33 TKPH
21.00R35 TKPH 351 284 351 284
24.00R35 TKPH 524 448 524 448
24.00R49 TKPH 562 455 445 562
27.00R49 TKPH 804 688 557 804 688 557 753 644 521 753 644 521
30.00R51 TKPH 1171 1001 1065 897
33.00R51 TKPH 1209 1018 837
36.00R51 TKPH — 1407 1185 974
37.00R57 TKPH
40.00R57 TKPH 1739 1463 1204
NOTE: For cycle lengths of 5 km (3 miles) or less (round trip), multiply the TKPH value in this table by 1.12.Additional tread compounds are available to meet specific TKPH.
Because of the variance between specific tires it is recommended that at the time of purchase you check with your tire supplier for the manufacturer’s specific TKPH ratings for the tires purchased.
PHB-Sec32-14.indd 31PHB-Sec32-14.indd 31 12/20/13 9:14 AM12/20/13 9:14 AM
32-32 Edition 44
Tires TKPH Rating● Bridgestone Tires
TKPH RATINGSAT 38° C (100° F) AMBIENT TEMPERATURE
For Haul Lengths of 32 km (20 miles) or Less One WayMaximum Speed Not to Exceed 48 km (30 miles) per Hour
BRIDGESTONE RADIAL PLY — CONVENTIONAL SIZESIndustry
Code E-4
Tread Design L317 VELS VELSL VMTP VMTS VRDP
Custom Code — 3A 1A 2A 3A 1A 3A 1A 2A 3A 1A 2A 3A 1A 2A
11.00R20 TKPH 188
12.00R20 TKPH 208
16.00R20 TKPH
12R22.5 TKPH 188
12.00R24 TKPH 177 136
13.00R24 TKPH
14.00R24 TKPH 85 136 119 91
16.00R24 TKPH
14.00R25 TKPH 85 136 119 91
16.00R25 TKPH 146 112 123
18.00R25 TKPH 179 144 244 209 169
21.00R25 TKPH
18.00R33 TKPH 246 211 170 267 229 185 287 246 199
21.00R33 TKPH 281 227 — — —
21.00R35 TKPH 328 281 227 293 237 383 328 265
24.00R35 TKPH 453 388 314 388 314 489 418 338
24.00R49 TKPH 492 421 341 552 361 575 492 398
27.00R49 TKPH 600 513 415 636 544 440 702 600 486 600 513 415
30.00R51 TKPH 717 603 496
33.00R51 TKPH 807 679 558 855 700 591 807 679 558
36.00R51 TKPH 927 781 642
37.00R57 TKPH 1003 845 694 1148
40.00R57 TKPH 1117 940 773 1330 1050 1117 940 773
NOTE: For cycle lengths of 5 km (3 miles) or less (round trip), multiply the TKPH value in this table by 1.12.Additional tread compounds are available to meet specific TKPH.
Because of the variance between specific tires it is recommended that at the time of purchase you check with your tire supplier for the manufacturer’s specific TKPH ratings for the tires purchased.
PHB-Sec32-14.indd 32PHB-Sec32-14.indd 32 12/20/13 9:14 AM12/20/13 9:14 AM
Edition 44 32-33
Tires
32
TKPH RATINGSAT 38° C (100° F) AMBIENT TEMPERATURE
For Haul Lengths of 32 km (20 miles) or Less One WayMaximum Speed Not to Exceed 48 km (30 miles) per Hour
BRIDGESTONE RADIAL PLY — CONVENTIONAL SIZESIndustry
Code E-4 E-7
Tread Design VREP VRLS VRPS VRQP VZTS VSJ
Custom Code — 3A 1A 2A 3A 1A 2A 2ALS 3A 1A 2A —
11.00R20 TKPH
12.00R20 TKPH
16.00R20 TKPH —
12R22.5 TKPH
12.00R24 TKPH
13.00R24 TKPH
14.00R24 TKPH 85
16.00R24 TKPH
14.00R25 TKPH 85
16.00R25 TKPH 146 112
18.00R25 TKPH
21.00R25 TKPH —
18.00R33 TKPH 246 211 170 122
21.00R33 TKPH 281 227
21.00R35 TKPH 328 281 227
24.00R35 TKPH 453 388 314 207
24.00R49 TKPH 492 421 341
27.00R49 TKPH — 600 513 415
30.00R51 TKPH 717 603 496
33.00R51 TKPH 807 679 558
36.00R51 TKPH 927 781 642
37.00R57 TKPH 1003 845 694 1003 845 694
40.00R57 TKPH 1117 940 773 — — — 1117 940 773
NOTE: For cycle lengths of 5 km (3 miles) or less (round trip), multiply the TKPH value in this table by 1.12.Additional tread compounds are available to meet specific TKPH.
TKPH Rating● Bridgestone Tires
Because of the variance between specific tires it is recommended that at the time of purchase you check with your tire supplier for the manufacturer’s specific TKPH ratings for the tires purchased.
PHB-Sec32-14.indd 33PHB-Sec32-14.indd 33 12/20/13 9:14 AM12/20/13 9:14 AM
32-34 Edition 44
Tires TKPH Rating● Bridgestone Tires
TKPH RATINGSAT 38° C (100° F) AMBIENT TEMPERATURE
For Haul Lengths of 32 km (20 miles) or Less One WayMaximum Speed Not to Exceed 48 km (30 miles) per Hour
BRIDGESTONE RADIAL PLY — WIDE BASE SIZESIndustry
Code E-2 E-3 E-4
Tread Design VKT VJT VLT VMT VRL VLTS VSNT
Custom Code 3A 1A 2A 1A 2A 1A 2A 1A 2A 1A 2A 2A 2A
15.5R25 TKPH
17.5R25 TKPH 95 —
20.5R25 TKPH 166 129 — — —
23.5R25 TKPH 263 205 248 190 190 248 190 161
26.5R25 TKPH 312 257 293 220 220 293 220 186 165
29.5R25 TKPH 420 376 310 354 266 266 354 266 225 220
29.5R29 TKPH 401 330 232
33.25R29 TKPH 494 407 476 349 435 319
37.5R33 TKPH 648
29.5R35 TKPH 380
33.25R35 TKPH 441 472 346
37.25R35 TKPH 720 644 530 569 417 563 413
37.5R39 TKPH 696 608
NOTE: For cycle lengths of 5 km (3 miles) or less (round trip), multiply the TKPH value in this table by 1.12.Additional tread compounds are available to meet specific TKPH.
Because of the variance between specific tires it is recommended that at the time of purchase you check with your tire supplier for the manufacturer’s specific TKPH ratings for the tires purchased.
PHB-Sec32-14.indd 34PHB-Sec32-14.indd 34 12/20/13 9:14 AM12/20/13 9:14 AM
Edition 44 32-35
Tires
32
TKPH RATINGSAT 38° C (100° F) AMBIENT TEMPERATURE
For Haul Lengths of 32 km (20 miles) or Less One WayMaximum Speed Not to Exceed 48 km (30 miles) per Hour
BRIDGESTONE RADIAL PLY — 95 SERIES SIZESIndustry
Code E-2 E-3
Tread Design VFT VKT VSB VEL
Custom Code 1A 2A 1A 2A 2A 1A 2A
385/95R24 TKPH 141 106 141 106 179
385/95R25 TKPH
505/95R25 TKPH 239 193 239 193 224 181NOTE: For cycle lengths of 5 km (3 miles) or less (round trip), multiply the TKPH value in this table by 1.12.
Additional tread compounds are available to meet specific TKPH.
TKPH RATINGSAT 38° C (100° F) AMBIENT TEMPERATURE
For Haul Lengths of 32 km (20 miles) or Less One WayMaximum Speed Not to Exceed 48 km (30 miles) per Hour
BRIDGESTONE RADIAL PLY — 90 SERIES SIZESIndustry
Code E-4
Tread Design VELS VRDP VRLS VRPS VZTP
Custom Code 3A 1A 2A 3A 1A 2A 3A 1A 2A 3A 1A 2A 2ALS
21/90R33 TKPH 246 211 170 246 211 170
31/90R49 TKPH 618 528 427 618 528 427
42/90R57 TKPH 1033 870 715
46/90R57 TKPH 1150 968 796 1150 968 796 1150 968 796 — — — 585
50/90R57 TKPH 1278 1092 884 1278 1092 884 — — —NOTE: For cycle lengths of 5 km (3 miles) or less (round trip), multiply the TKPH value in this table by 1.12.
Additional tread compounds are available to meet specific TKPH.
TKPH Rating● Bridgestone Tires
Because of the variance between specific tires it is recommended that at the time of purchase you check with your tire supplier for the manufacturer’s specific TKPH ratings for the tires purchased.
Because of the variance between specific tires it is recommended that at the time of purchase you check with your tire supplier for the manufacturer’s specific TKPH ratings for the tires purchased.
PHB-Sec32-14.indd 35PHB-Sec32-14.indd 35 12/20/13 9:14 AM12/20/13 9:14 AM
32-36 Edition 44
Tires
TKPH RATINGSAT 38° C (100° F) AMBIENT TEMPERATURE
For Haul Lengths of 32 km (20 miles) or Less One WayMaximum Speed Not to Exceed 48 km (30 miles) per Hour
BRIDGESTONE RADIAL PLY — 80 SERIES SIZESIndustry
Code E-2 E-3
Tread Design VKT VJT VLT VMT VRD VRF
Custom Code 3A 1A 2A 1A 2A 2A 1A 2A 3A 1A 3A 1A
335/80R20 TKPH
365/80R20 TKPH
445/80R25 TKPH 144 144
525/80R25 TKPH 232 206 160 194 149 149 194 149
53/80R63 TKPH — —
55/80R63 TKPH
59/80R63 TKPH — — — —NOTE: For cycle lengths of 5 km (3 miles) or less (round trip), multiply the TKPH value in this table by 1.12.
Additional tread compounds are available to meet specific TKPH.
BRIDGESTONE RADIAL PLY — 80 SERIES SIZESIndustry
Code E-4
Tread Design VLTS VRDP VRLS VRPS
Custom Code 2A 3A 1A 2A 3A 1A 2A 3A 1A 2A
335/80R20 TKPH
365/80R20 TKPH
445/80R25 TKPH
525/80R25 TKPH 126
53/80R63 TKPH 1408 1150 974 1512 1233 1045 — — —
55/80R63 TKPH 1643 1341 1137
59/80R63 TKPH * * * — —*Consult Bridgestone Representative.NOTE: For cycle lengths of 5 km (3 miles) or less (round trip), multiply the TKPH value in this table by 1.12.
Additional tread compounds are available to meet specific TKPH.
TKPH Rating● Bridgestone Tires
Because of the variance between specific tires it is recommended that at the time of purchase you check with your tire supplier for the manufacturer’s specific TKPH ratings for the tires purchased.
PHB-Sec32-14.indd 36PHB-Sec32-14.indd 36 12/20/13 9:14 AM12/20/13 9:14 AM
Edition 44 32-37
Tires
32
TKPH Rating● Bridgestone Tires
TKPH RATINGSAT 38° C (100° F) AMBIENT TEMPERATURE
For Haul Lengths of 32 km (20 miles) or Less One WayMaximum Speed Not to Exceed 48 km (30 miles) per Hour
BRIDGESTONE RADIAL PLY — 75 SERIES SIZESIndustry
Code E-3
Tread Design VLT VRL
Custom Code 1A 2A 3A 1A 2A
40.5/75R39 TKPH 682 500 765 675 495NOTE: For cycle lengths of 5 km (3 miles) or less (round trip), multiply the TKPH value in this table by 1.12.
Additional tread compounds are available to meet specific TKPH.
TKPH RATINGSAT 38° C (100° F) AMBIENT TEMPERATURE
For Haul Lengths of 32 km (20 miles) or Less One WayMaximum Speed Not to Exceed 48 km (30 miles) per Hour
BRIDGESTONE RADIAL PLY — 65 SERIES SIZESIndustry
Code E-2 E-3 E-4
Tread Design VKT VLT VTS VLTS VSNT
Custom Code 2A 2A — 2A 2A
25/65R25 TKPH 162
30/65R25 TKPH 225 195
550/65R25 TKPH —
600/65R25 TKPH
650/65R25 TKPH —
750/65R25 TKPH — — 195
775/65R29 TKPH —
875/65R29 TKPH —
35/65R33 TKPH 250NOTE: For cycle lengths of 5 km (3 miles) or less (round trip), multiply the TKPH value in this table by 1.12.
Additional tread compounds are available to meet specific TKPH.
Because of the variance between specific tires it is recommended that at the time of purchase you check with your tire supplier for the manufacturer’s specific TKPH ratings for the tires purchased.
Because of the variance between specific tires it is recommended that at the time of purchase you check with your tire supplier for the manufacturer’s specific TKPH ratings for the tires purchased.
PHB-Sec32-14.indd 37PHB-Sec32-14.indd 37 12/20/13 9:14 AM12/20/13 9:14 AM
32-38 Edition 44
Tires TKPH Rating● Bridgestone Tires
TKPH RATINGSAT 38° C (100° F) AMBIENT TEMPERATURE
For Haul Lengths of 32 km (20 miles) or Less One WayMaximum Speed Not to Exceed 48 km (30 miles) per Hour
BRIDGESTONE BIAS PLY — CONVENTIONAL SIZESIndustry
Code E-3 E-4 E-7
Tread Design RL WL ELS2 RLS SCP2
Custom Code 1A 2A — IDU 2A —
9.00-20 TKPH —
10.00-20 TKPH — —
11.00-20 TKPH — —
12.00-20 TKPH — —
14.00-20 TKPH —
12.00-24 TKPH — —
14.00-24 TKPH — — —
16.00-25 TKPH — — —
18.00-25 TKPH — — — —
18.00-33 TKPH — —
21.00-35 TKPH —NOTE: For cycle lengths of 5 km (3 miles) or less (round trip), multiply the TKPH value in this table by 1.12.
Additional tread compounds are available to meet specific TKPH.
BRIDGESTONE BIAS PLY — CONVENTIONAL SIZESIndustry
Code E-3 E-4
Tread Design RL VL2 RLS
Custom Code 1A 2A — 2A
20.5-25 TKPH —
23.5-25 TKPH — —
26.5-25 TKPH — —
29.5-25 TKPH — —
37.25-35 TKPH — —NOTE: For cycle lengths of 5 km (3 miles) or less (round trip), multiply the TKPH value in this table by 1.12.
Additional tread compounds are available to meet specific TKPH.
Because of the variance between specific tires it is recommended that at the time of purchase you check with your tire supplier for the manufacturer’s specific TKPH ratings for the tires purchased.
PHB-Sec32-14.indd 38PHB-Sec32-14.indd 38 12/20/13 9:14 AM12/20/13 9:14 AM
32
Edition 44 32-39
TiresTKPH Rating● Michelin Tires
TKPH RATINGSAT 38° C (100° F) AMBIENT TEMPERATURE
For Haul Cycles Less than 5 km (3 miles) Round Trip
MICHELIN RADIAL PLY — CONVENTIONAL SIZESIndustry
Code E-2 E-3
Tread Design XHM XL XMH XSNO+ XV XZL XDC XDM XK
CustomCode — B — — C — C4 B B4 C C4 B A
16.00R20 TKPH —
24R20.5 TKPH
24R21 TKPH —
12.00R24 TKPH
14.00R24 TKPH — — —
14.00R25 TKPH 232
16.00R25 TKPH — 187
18.00R25 TKPH 284 237
21.00R25 TKPH
18.00R33 TKPH 436
21.00R33 TKPH
21.00R35 TKPH
24.00R35 TKPH 740
24.00R49 TKPH
27.00R49 TKPH 1090
30.00R51 TKPH
33.00R51 TKPH 1395 1209 1054
36.00R51 TKPH 1480 1369 1258
37.00R57 TKPH
40.00R57 TKPH 1920 1776 1632 1584 1440
NOTE: Consult Michelin for TKPH rating on haul cycles greater than 5 km (3 miles).Additional tread compounds are available to meet specific TKPH.
Because of the variance between specific tires it is recommended that at the time of purchase you check with your tire supplier for the manufacturer’s specific TKPH ratings for the tires purchased.
PHB-Sec32-14.indd 39PHB-Sec32-14.indd 39 12/20/13 9:14 AM12/20/13 9:14 AM
32-40 Edition 44
Tires TKPH Rating● Michelin Tires
TKPH RATINGSAT 38° C (100° F) AMBIENT TEMPERATURE
For Haul Cycles Less than 5 km (3 miles) Round Trip
MICHELIN RADIAL PLY — CONVENTIONAL SIZESIndustry
Code E-3 E-4
Tread Design XR B XZH X-TRACTION S XDM XDR
CustomCode B — B B B4 C C4 B B4 A
16.00R20 TKPH
24R20.5 TKPH
24R21 TKPH
12.00R24 TKPH 119
14.00R24 TKPH
14.00R25 TKPH
16.00R25 TKPH
18.00R25 TKPH
21.00R25 TKPH
18.00R33 TKPH 305
21.00R33 TKPH
21.00R35 TKPH
24.00R35 TKPH
24.00R49 TKPH 453 384
27.00R49 TKPH 763 567 480 392
30.00R51 TKPH 643 536
33.00R51 TKPH 837 744 620 496
36.00R51 TKPH 888 740
37.00R57 TKPH 1018 848 1272 1145 1018 848
40.00R57 TKPH 1440 1296 1152 960
NOTE: Consult Michelin for TKPH rating on haul cycles greater than 5 km (3 miles).Additional tread compounds are available to meet specific TKPH.
Because of the variance between specific tires it is recommended that at the time of purchase you check with your tire supplier for the manufacturer’s specific TKPH ratings for the tires purchased.
PHB-Sec32-14.indd 40PHB-Sec32-14.indd 40 12/20/13 9:14 AM12/20/13 9:14 AM
Edition 44 32-41
Tires
32
TKPH Rating● Michelin Tires
TKPH RATINGSAT 38° C (100° F) AMBIENT TEMPERATURE
For Haul Cycles Less than 5 km (3 miles) Round Trip
MICHELIN RADIAL PLY — CONVENTIONAL SIZESIndustry
Code E-4
Tread Design XDR+ XDR2 XDT XH D1
CustomCode C C4 B B4 C C4 B B4 A B A A4 B A A4
16.00R20 TKPH
24R20.5 TKPH
24R21 TKPH
12.00R24 TKPH
14.00R24 TKPH
14.00R25 TKPH 102 84
16.00R25 TKPH 164
18.00R25 TKPH 222 163 133
21.00R25 TKPH
18.00R33 TKPH 262 157
21.00R33 TKPH
21.00R35 TKPH 348 209
24.00R35 TKPH 444 326 226
24.00R49 TKPH
27.00R49 TKPH 567 480 392 654 480 392
30.00R51 TKPH
33.00R51 TKPH 837 744 620 930 682
36.00R51 TKPH
37.00R57 TKPH 1272 1145 1018 848
40.00R57 TKPH 1440 1296 1152 960 1440 1296 1152 960
NOTE: Consult Michelin for TKPH rating on haul cycles greater than 5 km (3 miles).Additional tread compounds are available to meet specific TKPH.
Because of the variance between specific tires it is recommended that at the time of purchase you check with your tire supplier for the manufacturer’s specific TKPH ratings for the tires purchased.
PHB-Sec32-14.indd 41PHB-Sec32-14.indd 41 12/20/13 9:14 AM12/20/13 9:14 AM
32-42 Edition 44
Tires
TKPH RATINGSAT 38° C (100° F) AMBIENT TEMPERATURE
For Haul Cycles Less than 5 km (3 miles) Round Trip
MICHELIN RADIAL PLY — CONVENTIONAL SIZESIndustry
Code E-4 E-7
Tread Design XK D1 X—HAUL X—HAUL S X—QUARRY X—QUARRY S X—TRACTION X—TRACTION S XS
CustomCode A — — — — B B4 A4 C B —
16.00R20 TKPH
24R20.5 TKPH —
24R21 TKPH
12.00R24 TKPH
14.00R24 TKPH 84
14.00R25 TKPH
16.00R25 TKPH 93
18.00R25 TKPH 133 —
21.00R25 TKPH —
18.00R33 TKPH 262 166 218
21.00R33 TKPH 280 280
21.00R35 TKPH 209 122
24.00R35 TKPH 385 355 207 281 370 281
24.00R49 TKPH
27.00R49 TKPH 654 567 392 763
30.00R51 TKPH
33.00R51 TKPH
36.00R51 TKPH
37.00R57 TKPH
40.00R57 TKPH
NOTE: Consult Michelin for TKPH rating on haul cycles greater than 5 km (3 miles).Additional tread compounds are available to meet specific TKPH.
TKPH Rating● Michelin Tires
Because of the variance between specific tires it is recommended that at the time of purchase you check with your tire supplier for the manufacturer’s specific TKPH ratings for the tires purchased.
PHB-Sec32-14.indd 42PHB-Sec32-14.indd 42 12/20/13 9:14 AM12/20/13 9:14 AM
Edition 44 32-43
Tires
32
TKPH Rating● Michelin Tires
TKPH RATINGSAT 38° C (100° F) AMBIENT TEMPERATURE
For Haul Cycles Less than 5 km (3 miles) Round Trip
MICHELIN RADIAL PLY — WIDE BASE SIZESIndustry
Code E-2 E-3 E-4 E-7
Tread Design XG XL XSNO+ XADN XTS XADT XRS
X-SUPER TERRAIN XS
CustomCode C B — — — — B — —
17.5R25 TKPH — —
20.5R25 TKPH — — —
23.5R25 TKPH — — — —
26.5R25 TKPH — — —
29.5R25 TKPH — — —
29.5R29 TKPH 348
33.25R29 TKPH 429
29.5R35 TKPH 371
37.25R35 TKPH 540 415
37.5R39 TKPH 453NOTE: Consult Michelin for TKPH rating on haul cycles greater than 5 km (3 miles).
Additional tread compounds are available to meet specific TKPH.
Because of the variance between specific tires it is recommended that at the time of purchase you check with your tire supplier for the manufacturer’s specific TKPH ratings for the tires purchased.
PHB-Sec32-14.indd 43PHB-Sec32-14.indd 43 12/20/13 9:14 AM12/20/13 9:14 AM
32-44 Edition 44
Tires TKPH Rating● Michelin Tires
TKPH RATINGSAT 38° C (100° F) AMBIENT TEMPERATURE
For Haul Cycles Less than 5 km (3 miles) Round Trip
MICHELIN RADIAL PLY — 95 SERIES SIZESIndustry
Code E-2
Tread Design XL S XSNO+ XV
CustomCode B — — C
385/95R24 TKPH — —
385/95R25 TKPH — —
445/95R25 TKPH —
505/95R25 TKPH 284NOTE: Consult Michelin for TKPH rating on haul cycles greater than 5 km (3 miles).
Additional tread compounds are available to meet specific TKPH.
TKPH RATINGSAT 38° C (100° F) AMBIENT TEMPERATURE
For Haul Cycles Less than 5 km (3 miles) Round Trip
MICHELIN RADIAL PLY — 90 SERIES SIZESIndustry
Code E-4
Tread Design XDR
CustomCode C4 B B4
50/90R57 TKPH 1747 1498 1248NOTE: Consult Michelin for TKPH rating on haul cycles greater than 5 km (3 miles).
Additional tread compounds are available to meet specific TKPH.
Because of the variance between specific tires it is recommended that at the time of purchase you check with your tire supplier for the manufacturer’s specific TKPH ratings for the tires purchased.
Because of the variance between specific tires it is recommended that at the time of purchase you check with your tire supplier for the manufacturer’s specific TKPH ratings for the tires purchased.
PHB-Sec32-14.indd 44PHB-Sec32-14.indd 44 12/20/13 9:14 AM12/20/13 9:14 AM
Edition 44 32-45
Tires
32
TKPH RATINGSAT 38° C (100° F) AMBIENT TEMPERATURE
For Haul Cycles Less than 5 km (3 miles) Round Trip
MICHELIN RADIAL PLY — 80 SERIES SIZESIndustry
Code E-2 E-3 E-4
Tread Design XL XDR S XMP XDR XDR2
CustomCode B C4 B — C4 B B4 A C4 B B4 A
395/80R25 TKPH 180
525/80R25 TKPH —
50/80R57 TKPH 1394 1286 1072
53/80R63 TKPH 1837 1574 1312 1837 1574 1312
56/80R63 TKPH 2765 2458 2150 1843 1536
59/80R63 TKPH 2535 2218 2218 1901 1584 1267 2218 1901 1584 1267NOTE: Consult Michelin for TKPH rating on haul cycles greater than 5 km (3 miles).
Additional tread compounds are available to meet specific TKPH.
TKPH RATINGSAT 38° C (100° F) AMBIENT TEMPERATURE
For Haul Cycles Less than 5 km (3 miles) Round Trip
MICHELIN RADIAL PLY — 75 SERIES SIZESIndustry
Code E-3
Tread Design XMS
CustomCode B A
40.5/75R39 TKPH 766 500NOTE: Consult Michelin for TKPH rating on haul cycles greater than 5 km (3 miles).
Additional tread compounds are available to meet specific TKPH.
TKPH Rating● Michelin Tires
Because of the variance between specific tires it is recommended that at the time of purchase you check with your tire supplier for the manufacturer’s specific TKPH ratings for the tires purchased.
Because of the variance between specific tires it is recommended that at the time of purchase you check with your tire supplier for the manufacturer’s specific TKPH ratings for the tires purchased.
PHB-Sec32-14.indd 45PHB-Sec32-14.indd 45 12/20/13 9:14 AM12/20/13 9:14 AM
32-46 Edition 44
Tires TKPH Rating● Michelin Tires
TKPH RATINGSAT 38° C (100° F) AMBIENT TEMPERATURE
For Haul Cycles Less than 5 km (3 miles) Round Trip
MICHELIN RADIAL PLY — 65 SERIES SIZESIndustry
Code E-3 E-4 E-7
Tread Design XAD 65 XTXL XS
CustomCode — — —
525/65R20.5 TKPH —
650/65R25 TKPH —
750/65R25 TKPH —
850/65R25 TKPH —
775/65R29 TKPH —
875/65R29 TKPH —
35/65R33 TKPH 250NOTE: Consult Michelin for TKPH rating on haul cycles greater than 5 km (3 miles).
Additional tread compounds are available to meet specific TKPH.
Because of the variance between specific tires it is recommended that at the time of purchase you check with your tire supplier for the manufacturer’s specific TKPH ratings for the tires purchased.
PHB-Sec32-14.indd 46PHB-Sec32-14.indd 46 12/20/13 9:14 AM12/20/13 9:14 AM
32
Edition 44 32-47
TiresISO Load Index Speed Symbol● Michelin Tires
ISO LOAD INDEX SPEED SYMBOL AT 38° C (100° F) AMBIENT TEMPERATURE
For Haul Cycles Greater than 5 km (3 miles) Round Trip
MICHELIN RADIAL PLY — CONVENTIONAL SIZESIndustry Code E—2 E—7
Tread Design XL XV XZL XS
Custom Code B C — —
16.00R20 173G
24R20.5 176F
24R21 176G
16.00R25 177E
18.00R25 186E —
ISO LOAD INDEX SPEED SYMBOL AT 38° C (100° F) AMBIENT TEMPERATURE
For Haul Cycles Greater than 5 km (3 miles) Round Trip
MICHELIN RADIAL PLY — WIDE BASE SIZESIndustry Code E—2 E—3 E—4 E—7
Tread Design XL XADN XADT X-SUPER TERRAIN XS
Custom Code B — — — —
20.5R25 177B 177B
23.5R25 188E 185B* 185B
26.5R25 195E 193B* 193B
29.5R25 200E* 200B 196E*Speed option available via special field request.
Because of the variance between specific tires it is recommended that at the time of purchase you check with your tire supplier for the manufacturer’s specific TKPH ratings for the tires purchased.
Because of the variance between specific tires it is recommended that at the time of purchase you check with your tire supplier for the manufacturer’s specific TKPH ratings for the tires purchased.
PHB-Sec32-14.indd 47PHB-Sec32-14.indd 47 12/20/13 9:14 AM12/20/13 9:14 AM
32-48 Edition 44
Tires ISO Load Index Speed Symbol● Michelin Tires
ISO LOAD INDEX SPEED SYMBOL AT 38° C (100° F) AMBIENT TEMPERATURE
For Haul Cycles Greater than 5 km (3 miles) Round Trip
MICHELIN RADIAL PLY – 95 SERIES SIZESIndustry Code E-2
Tread Design XL S XSNO+ XV
Custom Code B — — C
385/95R24 170E 170E
385/95R25 170E 170E
445/95R25 177E
505/95R25 183E
ISO LOAD INDEX SPEED SYMBOL AT 38° C (100° F) AMBIENT TEMPERATURE
For Haul Cycles Greater than 5 km (3 miles) Round Trip
MICHELIN RADIAL PLY — 80 SERIES SIZESIndustry Code E-2 E-3
Tread Design XL XMP
Custom Code B —
395/80R25 165E
525/80R25 179E
Because of the variance between specific tires it is recommended that at the time of purchase you check with your tire supplier for the manufacturer’s specific TKPH ratings for the tires purchased.
Because of the variance between specific tires it is recommended that at the time of purchase you check with your tire supplier for the manufacturer’s specific TKPH ratings for the tires purchased.
PHB-Sec32-14.indd 48PHB-Sec32-14.indd 48 12/20/13 9:14 AM12/20/13 9:14 AM
32
Edition 44 32-49
TiresISO Load Index Speed Symbol● Michelin Tires
ISO LOAD INDEX SPEED SYMBOL AT 38° C (100° F) AMBIENT TEMPERATURE
For Haul Cycles Greater than 5 km (3 miles) Round Trip
MICHELIN RADIAL PLY — 65 SERIES SIZESIndustry Code E-3 E-7
Tread Design XAD 65 XS
Custom Code — —
525/65R20.5 173F
650/65R25 180B
750/65R25 190B
850/65R25 196B
775/65R29 195B
875/65R29 203B
Because of the variance between specific tires it is recommended that at the time of purchase you check with your tire supplier for the manufacturer’s specific TKPH ratings for the tires purchased.
PHB-Sec32-14.indd 49PHB-Sec32-14.indd 49 12/20/13 9:14 AM12/20/13 9:14 AM
32-50 Edition 44
Tires TKPH Rating● Triangle Tires
TKPH RATINGS AT 38º C (100º F) AMBIENT TEMPERATURE
For Haul Lengths of 32 km (20 miles) or Less One Way Maximum Speed Not To Exceed 48 km (30 miles) per Hour
TRIANGLE RADIAL PLY — CONVENTIONAL SIZESIndustry Code E-2 E-3 E-4
Tread Design TB536 TB586 TB526 TB516S TB526S TL558S
Custom Code T3 T2 T1 T3 T2 T1 T3 T2 T1 T3 T2 T1 T3 T2 T1 T3 T2 T1
14.00R24 TKPH — — — — — —
14.00R25 TKPH — — — — — — — — — — — —
16.00R25 TKPH — — — — — —
18.00R25 TKPH — — — — — — — — —
18.00R33 TKPH 270 190 160
21.00R33 TKPH 300 230 190
21.00R35 TKPH — — —
24.00R35 TKPH 390 350 280
TKPH RATINGS AT 38º C (100º F) AMBIENT TEMPERATURE
For Haul Lengths of 32 km (20 miles) or Less One Way Maximum Speed Not To Exceed 48 km (30 miles) per Hour
TRIANGLE RADIAL PLY — WIDE BASE SIZESIndustry Code E-2 E-3 E-4
Tread Design TB515 TM518 TB516 TL528 TL559 TL568+ TB598S
Custom Code T3 T2 T1 T3 T2 T1 T3 T2 T1 T3 T2 T1 T3 T2 T1 T3 T2 T1 T3 T2 T1
17.5R25 TKPH — — — — — —
20.5R25 TKPH — — — — — —
23.5R25 TKPH 260 200 170 230 170 145 230 190 150 185 135 115
26.5R25 TKPH 240 190 155 — — — 195 150 125
29.5R25 TKPH 290 230 180 225 175 135
29.5R29 TKPH — — —
33.25R29 TKPH — — —
Because of the variance between specific tires it is recommended that at the time of purchase you check with your tire supplier for the manufacturer’s specific TKPH ratings for the tires purchased.
Because of the variance between specific tires it is recommended that at the time of purchase you check with your tire supplier for the manufacturer’s specific TKPH ratings for the tires purchased.
PHB-Sec32-14.indd 50PHB-Sec32-14.indd 50 12/20/13 9:14 AM12/20/13 9:14 AM
32
Edition 44 32-51
TiresTKPH Rating● Triangle Tires
TKPH RATINGS AT 38º C (100º F) AMBIENT TEMPERATURE
For Haul Lengths of 32 km (20 miles) or Less One Way Maximum Speed Not To Exceed 48 km (30 miles) per Hour
TRIANGLE RADIAL PLY — 65 SERIES SIZESIndustry Code E-3
Tread Design TB598
Custom Code T3 T2 T1
750/65R25 TKPH 250 190 130
775/65R29 TKPH — — —
875/65R29 TKPH 360 285 230
Because of the variance between specific tires it is recommended that at the time of purchase you check with your tire supplier for the manufacturer’s specific TKPH ratings for the tires purchased.
PHB-Sec32-14.indd 51PHB-Sec32-14.indd 51 12/20/13 9:14 AM12/20/13 9:14 AM
32-52 Edition 44
Tires
TKPH RATINGS AT 38° C (100° F) AMBIENT TEMPERATURE
For Haul Lengths of 32 km (20 miles) or Less One WayMaximum Speed Not To Exceed 48 km (30 miles) per Hour
EUROTIRE RADIAL PLYIndustry Code E-4
Tread Design DR004 EROCK ETRAC ETRAC ADT LR004
29.5R25 TKPH 225 225
18.00R33 TKPH 192 192
21.00R33 TKPH 240
24.00R35 TKPH 357
27.00R49 TKPH 512
33.00R51 TKPH 660 660NOTE: Consult Eurotire for TKPH ratings on haul cycles greater than 5 km (3 miles).
TKPH RATINGS AT 38° C (100° F) AMBIENT TEMPERATURE
For Haul Lengths of 32 km (20 miles) or Less One WayMaximum Speed Not To Exceed 48 km (30 miles) per Hour
EUROTIRE BIAS PLYIndustry Code E-3 E-4
Tread Design U-11 U-12 U-11 U-12 U-14
24.00-35 TKPH 263
27.00-49 TKPH 385
33.00-51 TKPH 580 511 511
36/90-51 TKPH 520
37.00-57 TKPH 635
40.00-57 TKPH 685
46/90-57 TKPH 910 695NOTE: Consult Eurotire for TKPH ratings on haul cycles greater than 5 km (3 miles).
TKPH Rating● Eurotire Tires
Because of the variance between specific tires it is recommended that at the time of purchase you check with your tire supplier for the manufacturer’s specific TKPH ratings for the tires purchased.
Because of the variance between specific tires it is recommended that at the time of purchase you check with your tire supplier for the manufacturer’s specific TKPH ratings for the tires purchased.
PHB-Sec32-14.indd 52PHB-Sec32-14.indd 52 12/20/13 9:14 AM12/20/13 9:14 AM
Edition 44 32-53
Tires
32
TIRE AND RIM ASSOCIATION RATINGSWhile the TKPH Rating System provides a method to
determine the tire’s work capacity, Tire and Rim Asso-ci a tion Ratings provide a guide for evaluating a tire’s structural capacity. These two rating systems should be used in conjunction to evaluate tire performance.
TIRE SELECTIONSelecting the optimum tire for a given application is
particularly critical for earthmoving. The machines have the capability to outperform the tires and, unless proper practices are observed, very costly premature tire failures can occur. Job conditions vary greatly throughout the world, as well as within any given job site, and selecting the optimum tire requires careful consideration of all factors involved. In general, the tire manufacturer should be consulted before making the selection for any given application. In some cases, the tire manufacturer can fabricate tires specifically tailored for a given job site.
For those applications where wear is extremely slow, especially as a result of only occasional operation through-out the year, the cheapest lightweight tire needs to be given strong consideration.
As job conditions become severe, the following factors should be evaluated in selecting a tire:
Transport or Load-and-carry — ● TKPH (primary consideration) ● Minimum approved star/ply rating or greater ● Largest optional size ● Thickest tread commensurate with TKPH ● Most cut resistant tread commensurate with TKPH ● Belted construction
Grader — ● Tire load rating suitable for maximum equipped
machine weight (See Tire Load Worksheet on next page)
● Application specific tire (snow, construction, road maintenance, mining, general purpose, all season)
● Bias or radial based on initial cost, puncture resis-tance, rolling resistance, life to retread/repair
Loader or Dozer — ● Minimum approved ply rating or greater ● Largest optional size ● Thickest tread ● Thickest available undertread ● Buttressed shoulder ● Most cut resistant tread ● Belted construction ● Lowest aspect ratio
All tires should be operated at the tire manufacturer’s recommended inflation pressure for a given application. Inflation pressure should be checked every working day with an accurate gauge. This gauge should be checked against a known standard such as a dead weight tester at least once a month.
Excess loads may result from factors such as varying material density, field modifications to equipment, mud accumulation, load transfer, etc. Only under these condi-tions may the actual in service tire load exceed the rated machine load. When excess loads are encountered, cold inflation pressures must be increased to compensate for higher loads. Increase tire inflation pressure 2% for each 1% increase in load.
Maximum Excess Load Pressure
Bias Ply 15% 30%Radial Ply 7% 14%
The above loads will result in reduced tire perfor-mance and must be approved by the tire manufacturer.
The use of chains is difficult to justify except under a few conditions. Chains are very costly and heavy, and require more maintenance than most operations can provide. On some models sufficient clearance does not exist for chains with all tire combinations. Extensive modifications may be required if chains are needed for the job.
Foam filling tires is normally not recommended due to high cost and lack of local filling facilities. Its use should be confined to loader and dozer applications where penetrations occur almost daily. If foam is used be sure to adhere to recommended equivalent pressures of nitrogen and use highest available ply rating. Consult tire manufacturer for specific warranty concerns.
Tire and Rim Association RatingsTire Selection
PHB-Sec32-14.indd 53PHB-Sec32-14.indd 53 12/20/13 9:14 AM12/20/13 9:14 AM
Tire Load Worksheet (Motor Graders)Tire positions (top view)
A Machine information:
Base operating weight (kg) (1a) =
Rear operating weight (%) (2a) =
Front operating weight (%) (3a) =
B Tire loads:
Weight on rear tire before attachments (kg) (1b) = (1a) × (2a) / 4 = (Tires # 1, 2, 3, 4)
Weight on front tire before attachments (kg) (2b) = (1a) × (3a) / 2 = (Tires # 5, 6)
C Attachment information (reference Caterpillar Price List):
Attachment Type Tires affected Attachment weight distributionRipper 1, 2, 3, 4 25% per tirePush Block 5, 6 50% per tireFront blade (any type) 5, 6 62% per tireMid-Mount Scarifier 5, 6 40% per tire
1, 2, 3, 4 5% per tireSnow Wing 6 34% per tire
3, 4 55% per tire
Attachment #1 Attachment type: Attachment weight (kg) (1c) =
Tire positions affected (see chart) Tire #1 Tire #2 Tire #3 Tire #4 Tire #5 Tire #6
Attachment weight distribution per tire (see chart) (2c) =
Attachment weight per tire (kg) = (1c) × (2c) (3c) =
Attachment #2 Attachment type: Attachment weight (kg) (4c) =
Tire positions affected (see chart) Tire #1 Tire #2 Tire #3 Tire #4 Tire #5 Tire #6
Attachment weight distribution per tire (see chart) (5c) =
Attachment weight per tire (kg) = (4c) × (5c) (6c) =
Attachment #3 Attachment type: Attachment weight (kg) (7c) =
Tire positions affected (see chart) Tire #1 Tire #2 Tire #3 Tire #4 Tire #5 Tire #6
Attachment weight distribution per tire (see chart) (8c) =
Attachment weight per tire (kg) = (7c) × (8c) (9c) =
NOTE: Repeat for additional attachments if needed.
D Sum of attachment weights and Total weight per tire (kg)
Tire #1 Tire #2 Tire #3 Tire #4 Tire #5 Tire #6
(1d) = (3c) + (6c) + (9c) =
(2d) = (1d) + [(1b) or (2b)] =
E Controlling tire weight = maximum value from (2d) (1e) = kg
F Summary
– Choose a tire with a rated load capacity equal to or greater than the controlling tire weight = Tire rating > (1f) – Attachments may cause the maximum weight per tire to exceed tire capacity. In these cases the tire supplier should be consulted. – Contact your tire supplier for machine specific inflation pressures to ensure compensation for different tire loads.
32-54 Edition 44
Tires Tire Selection
Tire #1
Rear Tandem Front Axle Forward direction of machine motion
Tire #2 Tire #5
Tire #3 Tire #4 Tire #6
PHB-Sec32-14.indd 54PHB-Sec32-14.indd 54 12/20/13 9:14 AM12/20/13 9:14 AM
32
Edition 44 32-55
TiresTire Selection● Guide
TIRE SELECTION GUIDE
MaterialRoad or Ground
Condition
TreadsHaul Trucks and Wheel
Tractor-ScrapersWheel Tractors or Wheel Loaders Graders*
Silt and clay:– No rock– High moisture content
– Good varying to poor– High rolling
resistance
E-2 (Traction) L-2 (Traction) G-2 (Traction)
Silt and clay:– Some rock– Variable moisture
content
– Good varying to poor E-3 (Rock)E-2 (Traction)
L-3/L-4/L-5 (Rock)L-2 (Traction)
G-3/G-4 (Rock)G-2 (Traction)
Silt/clay/gravel/sand:– Low moisture content
– Excellent to good– Firm surface
E-3/E-4 (Rock) L-3/L-4/L-5 (Rock) G-3/G-4 (Rock)L-3/L-4/L-5 (Rock)
Silt/clay/gravel/sand:– High moisture content
– Poor– Rutted– Pot holes
E-3/E-4 (Rock) L-3/L-4/L-5 (Rock) G-3/G-4 (Rock)L-3/L-4/L-5 (Rock)
Blasted rock Hard surface, rough E-4 (Rock) L-5 (Rock)L-5S (Smooth)
G4 (Rock)L-4/L-5 (Rock)
Sand:– Very low silt/clay
content
Good to fair surface E-3 (Rock)E-7 (Flotation)
L-3 (Rock)L-3S (Smooth)
G-3 (Rock)Low pressure
*NOTE: In some cases, an L type tire is appropriate for use on a Grader application, consult your tire supplier for proper tire selection.
PHB-Sec32-14.indd 55PHB-Sec32-14.indd 55 12/20/13 9:14 AM12/20/13 9:14 AM
RECOMMENDED MOUNTING LUBRICANTS FROM SUPPLIERS
The following table documents tire sup plier recom-mendations for Tire Mounting Compounds.
Tire Mounting Compounds
Tire-SlickMichelin “Tigre 80” GreaseREMA TiptopFuchs SilkoleneIZY-SEEL
TIRE SUPPLIER RECOMMENDED COLD INFLATION PRESSURES
The following tables present commonly found Caterpillar and the tire suppliers’ recommended cold inflation pressures for tires on Cat machines. For inflation pressures of tire suppliers not listed please obtain them directly from the respected supplier.
The inflation pressure is based on a ready-to-work vehicle weight, rated payload, and average operating conditions. Pressures for each application may need to be varied from those shown and should always be obtained from your tire supplier.
Pressures for all tires apply to rib, traction, rock, deep tread, and super deep tread tires.
NOTE: Caterpillar recommends using dry nitrogen (N2) gas for both tire inflation and pressure adjustments on all current and past production machines.
EXCAVATORSFor complete tire data and inflation pressures, see the Excavator section in this handbook.
STANDARD COLD INFLATION PRESSURESSKIDDERS — Bias Ply
Model Tire SizePly
Rating
Inflation Pressure
Front Rear
kPa psi kPa psi
525C 30.5L-32 20 170 25 170 25
535C 30.5L-32 26 170 25 170 25
545C DH35.5LB32 20 170 25 170 25
DH35.5LB32 24 170 25 170 25
Optimal pressures may vary depending on specific applications and working conditions. Always consult your local tire supplier for operating pressures.
32-56 Edition 44
Tires Standard Cold Inflation Pressures● Skidders — Bias Ply
PHB-Sec32-14.indd 56PHB-Sec32-14.indd 56 12/20/13 9:14 AM12/20/13 9:14 AM
32
Edition 44 32-57
TiresStandard Cold Inflation Pressures● Skid Steer Loaders — Bias and Bias Belted
SKID STEER LOADERS — Bias and Bias Belted
Model Tire Size Ply Rating
Inflation Pressure
GalaxyBeefy Baby
Cat Premium Conventional
Cat XD (Extreme Duty)
GoodyearSGLSS
GoodyearUGL
kPa psi kPa psi kPa psi kPa psi kPa psi
216B3 7-15 6 415 60
10-16.5 6 240 35
10-16.5 8 345 50 310 45
31x15.5-15 8 310 45
226B3 7-15 6 415 60
10-16.5 6 240 35
10-16.5 8 345 50 310 45
31x15.5-15 8 310 45
236D 10-16.5 6 240 35
10-16.5 8 345 50 410 60
10-16.5 10 345 50
12-16.5 10 310 45 310 44.95
242D 10-16.5 6 240 35
10-16.5 8 345 50 410 60
10-16.5 10 345 50
12-16.5 10 310 45 310 44.95
246D 12-16.5 10 310 45 310 45
12-16.5 14 345 50
262D 12-16.5 10 310 45 310 45
12-16.5 14 345 50
272D 12-16.5 10 310 45 310 45 310 45
12-16.5 14 345 50 345 50
14-17.5 14 415 60 415 60
272D XHP 14-17.5 14 415 60 415 60
Optimal pressures may vary depending on specific applications and working conditions. Always consult your local tire supplier for operating pressures.
PHB-Sec32-14.indd 57PHB-Sec32-14.indd 57 12/20/13 9:14 AM12/20/13 9:14 AM
32-58 Edition 44
Tires Standard Cold Inflation Pressures● Telehandlers
TELEHANDLERSModel Tire Size Ply Rating Inflation Pressure
kPa psi
TH220B 15.5/80-24 16 250 36
17.5LR24xM27 12 310 45
15.5-25 SGL-2A 12 410 59
TH330B 13.00-24 SGG-2ATL 12 370 54
13.00-24 Cat 12 450 65
440/70R24xM37 (17.5R24) Radial 350 51
550/70R24xM37 (19.5LR24) Radial 350 51
15.5-25 SGL-2A 12 320 46
15.5-25 Cat 12 400 58
15.5R25 XHA Radial 400 58
TH255 12x16.5 12 551 80
14x17.5 10 482 70
TH336TH406
15.5/80-24 TR01 14 410 59
15.5/80-24 SGL-2A 16 400 58
400/80-24-400 — 400 58
460/70R24 Radial 420 61
15.5-25 SGL 8, 12 400 58
TH337TH407
15.5/80-24 TR01 14 410 59
15.5/80-24 SGL-2A 16 400 58
400/80-24-400 — 400 58
440/80-24-350 — 350 51
460/70R24 Radial 420 61
500/70R24 Radial 300 44
15.5-25 SGL 8, 12 400 58
TH417TH514
14.00-24 TG02 16 425 62
14.00-24 SGG-2A 16 525 76
TL642TL963
13.00-24 12 448 65
13.00R24 ★ 482 70
15.5-25 12 448 65
15.5R24 ★ 482 70
370/75-28 14 524 76
TL642CTL943C
13.00x24 12 448 65
15.5-25 12 400 58
370/75-28 14 524 76
TL1055TL1255
14.00-24 12 448 65
14.00R24 ★ 482 70
17.5-25 12 448 65
17.5R25 ★ 482 70
400/75-28 16 524 76
TL1055CTL1255C
14.00-24 12 448 65
17.5-25 12 448 65
400/75-28 16 524 76NOTE: See machine OMM for operating pressures. http://onlineexpress2.jlg.com/CAGUI/default.aspx.
Optimal pressures may vary depending on specific applications and working conditions. Always consult your local tire supplier for operating pressures.
PHB-Sec32-14.indd 58PHB-Sec32-14.indd 58 12/20/13 9:14 AM12/20/13 9:14 AM
32
BACKHOE LOADERS (Front)
Model Tire SizePly/Speed
SymbolInflation Pressure
kPa psi
416E/F, 420F, 422F 11L-16 12 PLY 441 64
416E/F, 420F 12-16.5 10 PLY 448 65
416E/F, 420F, 430F 12.5/80-18 12 PLY/10 PLY 276/310 54/45
422F, 428F, 432F 12.5/80-18 10 PLY/14 PLY 317/372 46/54
416E/F, 420F, 422F, 428F, 430F, 432F 340/80R18 143 B/143 A8/136 A8/134 A8 400/345/317/317 58/50/46/46
428F, 432F 340/80R20 144 A8 372 54
428F, 432F 340/80-18 12 PLY 345 50
428F, 432F 340/80-20 10 PLY 317 47
450E/F 15-19.5 12 PLY 414 60
BACKHOE LOADERS (Rear)
Model Tire SizePly/Speed
SymbolInflation Pressure
kPa psi
416E/F, 420F, 430F 19.5L-24 12 PLY 234 34
416E/F, 420F, 430F 500/70R24 157 B/164 A8 317/331 46/48
416E/F, 420F, 430F, 450E/F 21L-24 16 PLY/18 PLY 276/310 40/45
422F, 428F, 432F 16.9-28 12 PLY 262 38
422F, 428F, 432F, 434F, 444F 440/80R28 156 A8 282 41
428F, 432F 18.4-26 12 PLY 248 36
428F, 432F 480/80-26 12 PLY 282 41
428F, 432F 480/80R26 160 A8 282 41
428F, 432F, 434F, 444F 440/80-28 12 PLY 282 41
434F 440/80R24 161 A8/154 A8 324/317 47/46
Edition 44 32-59
TiresStandard Cold Inflation Pressures● Backhoe Loaders (Front/Rear)
Optimal pressures may vary depending on specific applications and working conditions. Always consult your local tire supplier for operating pressures.
PHB-Sec32-14.indd 59PHB-Sec32-14.indd 59 12/20/13 9:14 AM12/20/13 9:14 AM
32-60 Edition 44
Tires Standard Cold Inflation Pressures● Paving Products — Bias Ply and Radial Pneumatic Tires
PAVING PRODUCTS — Bias Ply and Radial Pneumatic TiresModel Tire Size Ply Rating Inflation Pressure1, 2, 3
kPa psi
WHEEL ASPHALT PAVERS
AP500E/BG500E 17.5R25 * 448 65
AP600D/BG600D 16.00-24 12 345 50
445/95R25 ** 551 80
AP1000E/BG1000E 18.00-25 16 379 55
445/95R25 ** 586 85
VIBRATORY SOIL COMPACTORS
CP44
CS44
CP54
CP54B
CS54 23.1-26 8 110 16
CS54 XT
CS54B
CP56 23.1-26 8 110 16
CP56B
CS56 23.1-26 8 110 16
CS56B
CP64 23.1-26 12 165 24
CS64 23.1-26 8 110 16
23.1-26 12 165 24
CP68B
CS68B
CP74 23.1-26 8 110 16
CP74B
CS74 23.1-26 8 110 16
23.1-26 12 165 24
CS74B
CP76 23.1-26 12 165 24
CS76 23.1-26 12 165 24
CS76 XT 23.1-26 12 165 24
CS78B
PNEUMATIC ROLLERS
PS150C 8.50/90x15 6 350 51
7.50x15 12 760 110
PS360C 14/70x20 20 760 1101Inflation pressures are maximum rated tire pressures.2 Pressure varies with application for Pneumatic Tire Compactors (PS).3 Consult your local tire supplier for operating pressures.
Optimal pressures may vary depending on specific applications and working conditions. Always consult your local tire supplier for operating pressures.
PHB-Sec32-14.indd 60PHB-Sec32-14.indd 60 12/20/13 9:14 AM12/20/13 9:14 AM
32
Edition 44 32-61
TiresStandard Cold Inflation Pressures● Motor Graders — Bias Ply
MOTOR GRADERS — Bias Ply*
Model Tire SizePly
Rating
Inflation PressureGoodyear Bridgestone/Firestone Triangle
Front Rear Front Rear Front RearkPa psi kPa psi kPa psi kPa psi kPa psi kPa psi
120M/M2/M3 13.00-24 12 241 35 310 4514.00-24 12 207 30 276 40 152 22 200 2914.00-24 16 228 33 324 4717.5-25 12 207 30 241 35 152 22 172 2517.5-25 16 200 29 303 44
140M/M2/M3 14.00-24 12 207 30 241 35 200 29 290 4214.00-24 16 248 36 352 5117.5-25 12 207 30 276 40 200 29 255 3717.5-25 16 228 33 324 47
160M/M2/M3 14.00-24 12 207 30 276 4014.00-24 16 248 36 372 5417.5-25 12 207 30 276 4017.5-25 16
12M/M2/M3 13.00-24 12 241 35 310 4514.00-24 12 207 30 276 40 172 25 290 4214.00-24 16 248 36 352 5115.5-25 12 207 30 241 3517.5-25 12 207 30 241 35 172 25 255 3717.5-25 16 228 33 324 47
14M/M3 16.00-24 16 172 25 324 47 207 30 310 4520.5-25 16 241 35 379 5520.5-25 20 172 25 303 44
16M/M3 18.00-25 16 207 30 241 3523.5-25 16 207 30 276 4023.5-25 20 172 25 276 40
24M/M3 29.5-29 28 345 50 379 55* Refer to Tire Load Worksheet to determine proper ply rating.
Optimal pressures may vary depending on specific applications and working conditions. Always consult your local tire supplier for operating pressures.
PHB-Sec32-14.indd 61PHB-Sec32-14.indd 61 12/20/13 9:14 AM12/20/13 9:14 AM
32-62 Edition 44
Tires Standard Cold Inflation Pressures● Motor Graders — Radial Ply
MOTOR GRADERS — Radial Ply
Model Tire SizeStrength Rating
Inflation Pressure
Michelin Goodyear Bridgestone Titan
Front Rear Front Rear Front Rear Front Rear
kPa psi kPa psi kPa psi kPa psi kPa psi kPa psi kPa psi kPa psi
120M/M2/M3 13.00R24 ★ 276 40 379 55
14.00R24 ★ 241 35 345 50 276 40 372 54 241 35 359 52
15.5R25 ★ Not Approved 241 35 310 45
17.5R25 ★ 207 30 276 40 228 33 303 44 207 30 241 35
140M/M2/M3 14.00R24 ★ 276 40 345 50 303 44 372 54 241 35 345 50
17.5R25 ★ 207 30 276 40 248 36 303 44 221 32 290 42
160M/M2/M3 14.00R24 ★ 276 40 345 50 324 47 427 62 241 35 359 52
17.5R25 ★ 207 30 276 40 248 36 352 51 241 35 310 45
12M/M2/M3 13.00R24 ★ Not Approved 276 40 379 55
14.00R24 ★ 207 30 310 45 303 44 372 54 262 38 359 52
17.5R25 ★ 207 30 241 35 248 36 303 44 207 30 290 42
14M/M3 16.00R24 ★ 310 45 345 50 248 36 427 62 207 30 359 52
20.5R25 ★ 207 30 310 45 248 36 324 47 207 30 310 45 207 30 310 45
16M/M3 23.5R25 ★, ★★ 207 30 310 45 172 25 324 47 207 30 290 42 207 30 310 45
24M/M3 29.5R29 ★, ★★ 310 45 379 55 324 47 476 69 345 50 414 60
NOTE: These are general inflation pressures. For applications such as slope and ditching service, the inflation pressures should be increased by 100 kPa (15 psi) with NO increase in carrying capacity. Any extreme conditions should be referred to your local tire supplier OR representative for recommended on pressures, sizes, patterns, and compounds for specific application. The recommended inflation pressures provided are a starting point for the machine shown.
Optimal pressures may vary depending on specific applications and working conditions. Always consult your local tire supplier for operating pressures.
PHB-Sec32-14.indd 62PHB-Sec32-14.indd 62 12/20/13 9:14 AM12/20/13 9:14 AM
32
Edition 44 32-63
TiresStandard Cold Inflation Pressures● Wheel Tractor-Scrapers — Bias and Radial Ply
WHEEL TRACTOR-SCRAPERS — Bias Ply
Model Tire Size Ply Rating
Inflation Pressure
Goodyear Bridgestone/Firestone Titan
Front Rear Front Rear Front Rear
kPa psi kPa psi kPa psi kPa psi kPa psi kPa psi
621H 33.25-29 26, 32, 38 379 55 379 55 414 60 345 50
623H 33.25-29 26, 32, 38 379 55 379 55 414 60 345 50
627H 33.25-29 26, 32, 38 379 55 379 55 414 60 414 60
631G 37.25-35 36, 42 427 62 372 54 448 65 448 65
637G 37.25-35 36, 42 448 65 427 62 448 65 448 65
657G 37.5-39 52
WHEEL TRACTOR-SCRAPERS — Radial Ply
Model Tire Size Ply Rating
Inflation Pressure
Michelin Goodyear Bridgestone
Front Rear Front Rear Front Rear
kPa psi kPa psi kPa psi kPa psi kPa psi kPa psi
621H 29.5R29 ★★ 517 75 517 75
33.25R29 ★★ 448 65 414 60 448 65 448 65
623H 29.5R29 ★★ 517 75 517 75
33.25R29 ★★ 448 65 414 60 448 65 448 65
627H 29.5R29 ★★ 517 75 517 75
33.25R29 ★★ 483 70 483 70 448 65 448 65
631G 37.25R35 ★★ 552 80 483 70 476 69 427 62 552 80 552 80
637G 37.25R35 ★★ 552 80 503 73 524 76 476 69 552 80 552 80
657G 40.5/75R39 ★★ 600 87 524 76 572 83 572 83 621 90 621 90
Optimal pressures may vary depending on specific applications and working conditions. Always consult your local tire supplier for operating pressures.
PHB-Sec32-14.indd 63PHB-Sec32-14.indd 63 12/20/13 9:14 AM12/20/13 9:14 AM
32-64 Edition 44
Tires Standard Cold Inflation Pressures● Articulated Trucks — Radial Ply● Mining & Off-Highway Trucks — Bias Ply
ARTICULATED TRUCKS — Radial Ply
Model Tire SizePly
Rating
Inflation Pressure
Michelin Goodyear Bridgestone
Front Center Rear Front Center Rear Front Center Rear
kPa psi kPa psi kPa psi kPa psi kPa psi kPa psi kPa psi kPa psi kPa psi
725C 23.5R25 ★★ 400 58 325 47.1 325 47.1
730C 23.5R25 ★★ 450 65.3 425 61.6 425 61.6
730C EJ 750/65R25 ★★ 290 42.1 360 52.2 360 52.2
735B 26.5R25 ★★ 448 65 414 60 414 60 483 70 448 65 448 65
740B 29.5R25 ★★ 414 60 414 60 414 60 427 62 400 58 400 58 448 65 427 62 427 62
740B EJ 29.5R25 ★★ 345 50 414 60 414 60 372 54 503 73 476 69
ARTICULATED TRUCKS — Radial Ply
Model Tire SizePly
Rating
Inflation Pressure
Titan Yokohama
Front Center Rear Front Center Rear
kPa psi kPa psi kPa psi kPa psi kPa psi kPa psi
735B 26.5R25 ★★ 552 80 483 70 483 70 517 75 483 70 483 70
740B 29.5R25 ★★ 483 70 448 65 448 65 483 70 448 65 448 65
740B EJ 29.5R25 ★★ 483 70 448 65 448 65
MINING & OFF-HIGHWAY TRUCKS – BIAS PLY
Model Tire SizePly
Rating
Inflation Pressure
Goodyear Bridgestone Eurotire
Front Rear Front Rear Front Rear
kPa psi kPa psi kPa psi kPa psi kPa psi kPa psi
773E* 24.00-35 42, 48 572 83 572 83 621 90 621 90 700 102 700 102
773G* 24.00-35 42, 48 621 90 621 90 700 102 700 102
775G* 24.00-35 42, 48 621 90 621 90 725 105 725 105
777D* 27.00-49 48 572 83 572 83 621 90 621 90 725 105 725 105
777G* 27.00-49 48 621 90 621 90 725 105 725 105
785D 33.00-51 58 725 105 725 105
793D/F 40.00-57 68 715 104 715 104
*Choosing Bias Ply tires may require reduction in payload or speed. Consult factory for specific details.
Optimal pressures may vary depending on specific applications and working conditions. Always consult your local tire supplier for operating pressures.
PHB-Sec32-14.indd 64PHB-Sec32-14.indd 64 12/20/13 9:14 AM12/20/13 9:14 AM
32
Edition 44 32-65
Tires
MINING & OFF-HIGHWAY TRUCKS — Radial Ply
Model Tire Size Ply Rating
Inflation Pressure
Michelin Goodyear Bridgestone
Front Rear Front Rear Front Rear
kPa psi kPa psi kPa psi kPa psi kPa psi kPa psi
770G 18.00R33 ★★, ★★★ 752 109 752 109 800 116 800 116 800 116 800 116
772G 21.00R33 ★★ 703 102 703 102 703 102 703 102 703 102 703 102
773E 24.00R35 ★★ 572 83 572 83 627 91 627 91 689 100 689 100
773G 24.00R35 ★★ 703 102 703 102 689 100 689 100
775G 24.00R35 ★★ 724 105 724 105 689 100 689 100
777D 27.00R49 ★★ 648 94 703 102 703 102 710 103 703 102 703 102
777G 27.00R49 ★★ 689 100 689 100 703 102 731 106 703 102 703 102
785D 33.00R51 ★★ 724 105 724 105 800 116 800 116 724 105 724 105
789D 37.00R57 ★★ 627 91 627 91 758 110 758 110
40.00R57 ★★ 552 80 552 80
793D/F 40.00R571★★ 724 105 724 105 724 105 724 105
46/90R571★★ 724 105 724 105 793 115 793 115
50/80R572★★ 621 90 621 90
MT4400D AC 46/90R57 ★★ 745 108 765 111 Consult Bridgestone
50/80R57 ★★ Consult Michelin
795F 56/80R63 ★★ 655 95 621 90 Not Approved Not Approved
59/80R63 ★★ Not Approved 703 102 703 102 703 102 703 102
797F 59/80R63 ★★ 689 100 689 100 724 105 724 1051 For both 793 D and F Series. Used on 813 mm (32") rim standard life wheel station only, not approved for use on 737 mm (29") rim or extended life wheel station.2For 793 F Series only. Used on 813 mm (32") rim with wide extended life wheel station.
Optimal pressures may vary depending on specific applications and working conditions. Always consult your local tire supplier for operating pressures.
Standard Cold Inflation Pressures● Mining & Off-Highway Trucks — Radial Ply
PHB-Sec32-14.indd 65PHB-Sec32-14.indd 65 12/20/13 9:14 AM12/20/13 9:14 AM
32-66 Edition 44
MINING & OFF-HIGHWAY TRUCKS — Radial Ply
Model Tire Size Ply Rating
Inflation Pressure
Titan Triangle Eurotire
Front Rear Front Rear Front Rear
kPa psi kPa psi kPa psi kPa psi kPa psi kPa psi
770G 18.00R33 ★★, ★★★ 793 115 827 120 800 116 800 116 800 116 800 116
772G 21.00R33 ★★ 700 102 700 102 700 102 700 102
773E 24.00R35 ★★ 689 100 621 90 700 102 700 102 700 102 700 102
773G 24.00R35 ★★ 689 100 689 100 700 102 700 102 700 102 700 102
775G 24.00R35 ★★ 758 110 724 105 720 104 720 104 725 105 720 104
777D 27.00R49 ★★ 724 105 724 105 725 105 725 105
777G 27.00R49 ★★ 724 105 724 105 725 105 725 105
785D 33.00R51 ★★ 725 105 725 105
789D 37.00R57 ★★ 725 105 725 105
40.00R57 ★★
793D/F 40.00R571★★ 800 116 750 109
46/90R571★★ 750 109 750 109
50/80R572★★
MT4400D AC 46/90R57 ★★
50/80R57 ★★
795F 56/80R63 ★★
59/80R63 ★★
797F 59/80R63 ★★1 For both 793 D and F Series. Used on 813 mm (32") rim standard life wheel station only, not approved for use on 737 mm (29") rim or extended life wheel station.2For 793 F Series only. Used on 813 mm (32") rim with wide extended life wheel station.
Optimal pressures may vary depending on specific applications and working conditions. Always consult your local tire supplier for operating pressures.
Tires Standard Cold Inflation Pressures● Mining & Off-Highway Trucks — Radial Ply
PHB-Sec32-14.indd 66PHB-Sec32-14.indd 66 12/20/13 9:14 AM12/20/13 9:14 AM
32
Edition 44 32-67
TiresStandard Cold Inflation Pressures● Wheel Loaders — Bias and Bias Belted
WHEEL LOADERS — Bias and Bias Belted
Model Tire Size Ply Rating
Inflation Pressure
Goodyear Bridgestone/Firestone Titan
Front Rear Front Rear Front Rear
kPa psi kPa psi kPa psi kPa psi kPa psi kPa psi
904H 12-16.5 10 240 35 175 25
33-15.5x16.5 12
914G 15.5-25 12 240 35 210 30
17.5-25 12 400 58 300 44 240 35 210 30
924H 17.5-25 12 400 58 300 44 380 55 275 40
20.5-25 12 250 36 210 30 275 40 210 30
924Hz 17.5-25 12 400 58 300 44 380 55 275 40
20.5-25 12 400 58 300 44 275 40 210 30
928Hz 17.5-25 12 400 58 300 44 380 55 275 40
20.5-25 12 400 58 300 44 275 40 210 30
23.1-26 14
930H 17.5-25 12 400 58 300 44 380 55 275 40
20.5-25 12 400 58 300 44 275 40 210 30
23.1-26 14
938H 20.5-25 16 352 51 248 36 345 50 207 30
20.5-25 20 372 54 248 36 345 50 207 30
950H/K 23.5-25 16, 20, 24 379 55 241 35 352 51 207 30
725/70-25 16 345 50 241 35
962H/K 23.5-25 16, 20 414 60 241 35 379 55 241 35
725/70-25 16 379 55 241 35
966H/K/M 26.5-25 20, 24, 26 400 58 276 40 414 60 276 40
972H/K/M 26.5-25 20, 24, 26 448 65 303 44 448 65 276 40
980H/K 29.5-25 22, 28 427 62 276 40 586 85 379 55
988H/K* 35/65-33 36, 42 627 91 427 62 655 95 414 60 689 100 414 60
990H 41.25/70-39 42 552 80 352 51 586 85 414 60 724 105 414 60
992K 45/65-45 46, 58 627 91 427 62 724 105 483 70 827 120 724 105
993K 50/65-51 62 724 105 483 70
994H/K** 52/80-57 68 600 87 400 58
53.5/85-57 76 724 105 483 70
58/85-57 84 724 105 483 70
**Goodyear recommended 600/400 kPa (87/58 psi) front/rear pressures for standard machine and 627/427 kPa (91/62 psi) for high-lift machine.** Goodyear recommended 600/400 kPa (87/58 psi) front/rear pressures for standard and high lift machine, 703/503 kPa (102/73 psi) for extended high lift
machine, and 772/572 kPa (112/83 psi) for super high lift machine.Bridgestone/Firestone inflation pressure for Giant loader tires (992K and above) are in reference to applications without chains. For use with chains please consult your Bridgestone/Firestone representative.For pressures not listed, consult your local tire supplier for operating pressures.
Optimal pressures may vary depending on specific applications and working conditions. Always consult your local tire supplier for operating pressures.
PHB-Sec32-14.indd 67PHB-Sec32-14.indd 67 12/20/13 9:14 AM12/20/13 9:14 AM
32-68 Edition 44
Tires Standard Cold Inflation Pressures● Wheel Loaders — Radial Ply
WHEEL LOADERS — Radial Ply
Model Tire Size Ply Rating
Inflation Pressure
Michelin Goodyear
Front Rear Front Rear
kPa psi kPa psi kPa psi kPa psi906H 405/70R18 ★
335/80R18 ★ 345 50 345 50340/80R18 ★ 345 50 345 50
908H 375/75R20 ★ 345 50 345 50914G 17.5R25 ★ 275 40 210 30924H 17.5R25 ★ 275 40 210 30
20.5R25 ★ 350 51 250 36550/65R25 ★
924Hz 17.5R25 ★ 450 65 275 4020.5R25 ★ 310 45 240 35 300 44 225 33
928Hz 17.5R25 ★ 380 55 275 4020.5R25 ★ 275 40 210 30 300 44 225 33600/65R25 ★ 275 40 210 30
930H 17.5R25 ★ 345 50 210 3020.5R25 ★ 275 40 210 30
938H 20.5R25 ★ 379 55 276 40 450 65 305 44550/65R25 ★ 414 60 310 45650/65R25 ★ 414 60 310 45
950H/K 23.5R25* ★, ★★ 448 65 241 35 476 69 303 44650/65R25 ★ 380 55 210 30750/65R25 ★ 345 50 310 45
962H/K 23.5R25 ★, ★★ 448 65 241 35 476 69 303 44750/65R25 ★ 345 50 207 30
966H/K/M 26.5R25* ★, ★★ 414 60 241 35 476 69 303 44750/65R25 ★ 345 50 241 35775/65R29 ★★ 427 62 276 40
972H/K/M 26.5R25** ★, ★★ 414 60 276 40 524 76 324 47750/65R25 ★ 448 65 345 50775/65R29 ★★ 448 65 303 44
980H/K 29.5R25*** ★, ★★ 517 75 276 40 552 80 352 51875/65R29 ★★ 552 80 310 45 448 65 303 44
988H/K 35/65R33 ★ 586 85 448 65 600 87 400 5835/65R33 ★★ 655 95 448 65875/65R33**** ★★ 627 91 427 62
990H 45/65R39 ★, ★★ 586 85 345 50 552 80 352 51992K 45/65R45 ★, ★★ 621 90 414 60 655 95 503 73993K 50/65R51 ★, ★★ 586 85 490 71
994H/K 55/80R57 ★ 621 90 448 6555.5/80R57 ★★
60/80R57 ★
58/80R63 ★★
****Goodyear recommended 448/303 kPa (65/44 psi) front/rear pressures for 950H, 950K, and 966H.****Goodyear recommended 476/303 kPa (69/44 psi) front/rear pressures for 972H and 503/303 kPa (73/44 psi) for 972K.****Goodyear recommended 503/303 kPa (73/44 psi) front/rear pressures for 988H and 524/324 kPa (76/47 psi) for 980K.**** Goodyear recommended 627/427 kPa (91/62 psi) front/rear pressures for 988H/988K standard and high lift machine and 800/600 kPa (116/87 psi) for
988H Logger and Block Handler machine.Bridgestone inflation pressure for Giant loader tires (992K and above) are in reference to applications without chains. For use with chains please consult your Bridgestone representative.
Optimal pressures may vary depending on specific applications and working conditions. Always consult your local tire supplier for operating pressures.
PHB-Sec32-14.indd 68PHB-Sec32-14.indd 68 12/20/13 9:14 AM12/20/13 9:14 AM
Edition 44 32-69
Tires
32
WHEEL LOADERS — Radial Ply
Model Tire Size Ply Rating
Inflation Pressure
Bridgestone Titan
Front Rear Front Rear
kPa psi kPa psi kPa psi kPa psi906H 405/70R18 ★
335/80R18 ★
340/80R18 ★
908H 375/75R20 ★
914G 17.5R25 ★ 415 60 275 40924H 17.5R25 ★ 415 60 310 45
20.5R25 ★ 415 60 275 40550/65R25 ★
924Hz 17.5R25 ★ 415 60 310 4520.5R25 ★ 415 60 275 40
928Hz 17.5R25 ★
20.5R25 ★ 415 60 310 45600/65R25 ★
930H 17.5R25 ★
20.5R25 ★ 415 60 310 45938H 20.5R25 ★ 310 45 210 30 241 35 241 35
550/65R25 ★
650/65R25 ★ 275 40 175 25950H/K 23.5R25* ★, ★★ 379 55 241 35 483 70 379 55
650/65R25 ★
750/65R25 ★ 414 60 276 40962H/K 23.5R25 ★, ★★ 379 55 241 35 552 80 379 55
750/65R25 ★ 414 60 276 40966H/K/M 26.5R25* ★, ★★ 414 60 276 40 448 65 414 60
750/65R25 ★ 483 70 345 50775/65R29 ★★ 483 70 345 50
972H/K/M 26.5R25** ★, ★★ 448 65 276 40 483 70 414 60750/65R25 ★ 483 70 345 50775/65R29 ★★ 483 70 345 50
980H/K 29.5R25*** ★, ★★ 586 85 379 55 621 90 448 65875/65R29 ★★ 517 75 379 55
988H/K 35/65R33 ★ 655 95 414 6035/65R33 ★★ 689 100 524 76 758 110 483 70875/65R33**** ★★
990H 45/65R39 ★, ★★ 621 90 483 70992K 45/65R45 ★, ★★ 724 105 483 70 793 115 517 75993K 50/65R51 ★, ★★ 724 105 483 70 793 115 517 75
994H/K 55/80R57 ★
55.5/80R57 ★★ 724 105 483 7060/80R57 ★
58/80R63 ★★ 758 110 552 80****Goodyear recommended 448/303 kPa (65/44 psi) front/rear pressures for 950H, 950K, and 966H.****Goodyear recommended 476/303 kPa (69/44 psi) front/rear pressures for 972H and 503/303 kPa (73/44 psi) for 972K.****Goodyear recommended 503/303 kPa (73/44 psi) front/rear pressures for 988H and 524/324 kPa (76/47 psi) for 980K.**** Goodyear recommended 627/427 kPa (91/62 psi) front/rear pressures for 988H/988K standard and high lift machine and 800/600 kPa (116/87 psi) for
988H Logger and Block Handler machine.Bridgestone inflation pressure for Giant loader tires (992K and above) are in reference to applications without chains. For use with chains please consult your Bridgestone representative.
Standard Cold Inflation Pressures● Wheel Loaders — Radial Ply
Optimal pressures may vary depending on specific applications and working conditions. Always consult your local tire supplier for operating pressures.
PHB-Sec32-14.indd 69PHB-Sec32-14.indd 69 12/20/13 9:14 AM12/20/13 9:14 AM
32-70 Edition 44
Tires
LOG LOADERS — Bias and Bias Belted
Model Tire SizeStrength
Index
Inflation Pressure
Goodyear Bridgestone/Firestone
Front Rear Front Rear
kPa psi kPa psi kPa psi kPa psi
IT14G 15.5-25 12
Consult Bridgestone/Firestone
17.5-25 12
924H Versalink™ 17.5-25 12 352 51 248 36
20.5-25 12
930H Versalink 20.5-25 12
938H 20.5-25 16, 20 400 58 276 40 310 45 207 30
950H 23.5-25 20 372 54 276 40 345 50 207 30
966H 26.5-25 20, 26 448 65 276 40 414 60 276 40
980H 29.5-25 28 427 62 276 40 586 85 379 55
988K 35/65-33 42Consult Goodyear
655 95 414 60
990H 41.25/70-39 42 Consult Bridgestone/Firestone
NOTE: Contact your tire supplier to obtain or confirm proper Log Loader pressures.NOTE: Pressures for “Log Loaders” are not approved because general application of machine exceeds tire load limit.
LOG LOADERS — Radial Ply
Model Tire SizeStrength
Index
Inflation Pressure
Michelin Goodyear Bridgestone Eurotire
Front Rear Front Rear Front Rear Front Rear
kPa psi kPa psi kPa psi kPa psi kPa psi kPa psi kPa psi kPa psi
IT14G 15.5R25 ★ 414 60 276 40 345 50 276 40
17.5R25 ★ 345 50 207 30 414 60 310 45 345 50 276 40
924H 17.5R25 ★ 414 60 207 30 427 62 276 40 345 50 276 40
20.5R25 ★ 310 45 207 30 324 47 228 33 345 50 276 40
550/65R25 ★ 310 45 207 30 324 47 228 33 414 60 310 45
930H 20.5R25 ★ 379 55 207 30 414 60 310 45 345 50 276 40
650/65R25 ★ 310 45 207 30 414 60 310 45
938H 20.5R25 ★ 414 60 276 40 448 65 303 44 310 45 207 30
550/65R25 ★ 414 60 241 35
600/65R25 ★
650/65R25 ★ 345 50 207 30
950H 23.5R25 ★, ★★ 450 65 276 40 476 69 303 44 345 50 207 30
650/65R25 ★ 345 50 241 35
750/65R25 ★ 276 40 207 30
966H 26.5R25 ★, ★★ 414 60 276 40 448 65 303 44 414 60 276 40
750/65R25 ★ 414 60 276 40
980H 29.5R25 ★, ★★ 517 75 276 40 503 73 303 44 586 85 379 55 585 85 380 55
988K 35/65R33 ★★ 800 116 600 87 655 95 414 60
990H 45/65R39 ★, ★★ Consult Michelin Consult Bridgestone
NOTE: Contact your tire supplier to obtain or confirm proper Log Loader pressures.NOTE: Pressures for “Log Loaders” are not approved because general application of machine exceeds tire load limit.
Standard Cold Inflation Pressures● Log Loaders — Bias and Bias Belted● Log Loaders — Radial Ply
Optimal pressures may vary depending on specific applications and working conditions. Always consult your local tire supplier for operating pressures.
PHB-Sec32-14.indd 70PHB-Sec32-14.indd 70 12/20/13 9:14 AM12/20/13 9:14 AM
Edition 44 32-71
Tires
32
INTEGRATED TOOLCARRIERS — Bias and Bias Belted
Model Tire Size Ply Rating
Inflation Pressure
Goodyear Bridgestone/Firestone
Front Rear Front Rear
kPa psi kPa psi kPa psi kPa psi
IT14G 15.5-25 12 310 45 207 30
Consult Bridgestone/Firestone
17.5-25 12 276 40 172 25
924H Versalink 17.5-25 12 310 45 241 35
20.5-25 12 276 40 207 30
930H Versalink 20.5-25 12 276 40 207 30
IT38H 20.5-25 16, 20 400 58 276 40 379 55 276 40
IT62H 23.5-25 16 372 54 248 36 345 50 207 30
NOTE: Contact your tire supplier to obtain or confirm proper Integrated Toolcarrier pressures.
INTEGRATED TOOLCARRIERS — Radial Ply
Model Tire Size Ply Rating
Inflation Pressure
Michelin Goodyear Bridgestone
Front Rear Front Rear Front Rear
kPa psi kPa psi kPa psi kPa psi kPa psi kPa psi
IT14G 15.5R25 ★ 276 40 207 30 345 50 276 40
17.5R25 ★ 241 35 207 30 414 60 310 45 207 30 310 45
924H 17.5R25 ★ 345 50 207 30 414 60 310 45 345 50 276 40
20.5R25 ★ 310 45 207 30 414 60 310 45 345 50 276 40
550/65R25 ★ 276 40 207 30 414 60 310 45
930H 17.5R25 ★ 345 50 207 30 414 60 310 45 345 50 276 40
20.5R25 ★ 276 40 207 30 414 60 310 45 345 50 276 40
550/65R25 ★ 414 60 310 45
600/65R25 ★ 310 45 207 30
IT38H 20.5R25 ★ 276 40 207 30 427 62 276 40 448 65 241 35
IT62H 23.5R25 ★ 345 50 241 35 427 62 276 40 345 50 207 30
NOTE: Contact your tire supplier to obtain or confirm proper Integrated Toolcarrier pressures.
Standard Cold Inflation Pressures● Integrated Toolcarriers — Bias and Bias Belted
● Integrated Toolcarriers — Radial Ply
Optimal pressures may vary depending on specific applications and working conditions. Always consult your local tire supplier for operating pressures.
PHB-Sec32-14.indd 71PHB-Sec32-14.indd 71 12/20/13 9:14 AM12/20/13 9:14 AM
32-72 Edition 44
Tires
WHEEL DOZERS — Bias Ply
Model Tire Size Ply Rating
Inflation Pressure
Goodyear Bridgestone/Firestone Titan
Front Rear Front Rear Front Rear
kPa psi kPa psi kPa psi kPa psi kPa psi kPa psi
814F2 18.00-25 12
23.5-25 12, 20 248 36 228 33
824H 29.5-25 22, 28 248 36 248 36 276 40 276 40
834K 35/65-33 24, 30, 42 324 47 324 47 345 50 345 50 379 55 414 60
844H 41.25/70-39 34, 42 303 44 303 44 517 75 517 75
854K 45/65-45 46, 50, 58 427 62 276 40 655 95 414 60 483 70 414 60
WHEEL DOZERS — Radial Ply
Model Tire Size Ply Rating
Inflation Pressure
Michelin Goodyear Bridgestone Titan
Front Rear Front Rear Front Rear Front Rear
kPa psi kPa psi kPa psi kPa psi kPa psi kPa psi kPa psi kPa psi
814F2 23.5R25 ★ 379 55 379 55
26.5R25 ★ 310 45 310 45
824H 29.5R25 ★ 276 40 241 35 400 58 303 44 345 50 345 50
★★ 310 45 276 40 400 58 303 44 345 50 345 50
834K 35/65R33 ★, ★★ 345 50 345 50 345 50 345 50 448 65 414 60
875/65R33 ★★ 400 58 400 58
844H 45/65R39 ★ 379 55 379 55 400 58 400 58 552 80 414 60
854K 45/65R45(1150/65R45)
★, ★★ 379 55 310 45 448 65 448 65 427 62 427 62 483 70 414 60
Optimal pressures may vary depending on specific applications and working conditions. Always consult your local tire supplier for operating pressures.
Standard Cold Inflation Pressures● Wheel Dozers — Bias and Radial Ply
PHB-Sec32-14.indd 72PHB-Sec32-14.indd 72 12/20/13 9:14 AM12/20/13 9:14 AM
32
Edition 44 32-73
TiresStandard Cold Inflation Pressures● Hard Rock Underground Mining — Bias and Radial Ply
HARD ROCK UNDERGROUND MINING — Bias and Radial Ply
Model Tire Size Ply Rating
Inflation Pressure
Michelin Goodyear Bridgestone
Front Rear Front Rear Front Rear
kPa psi kPa psi kPa psi kPa psi kPa psi kPa psi
LOAD-HAUL-DUMP LOADERS
R1300G 17.5R25 ★★ 691 100 622 90 650 94 480 70
17.5-25 20 552 80 448 65
R1600H 18.0R25 ★★ 691 100 518 75 650 94 450 65
18.0-25 28 552 80 448 65
R1700G 26.5R25 ★★ 622 90 415 60 650 94 450 65
26.5-25 32 552 80 448 65
R2900G 29.5R29 ★★ 622 90 415 60 650 94 450 65
29.5-29 34, 40 690 100 552 80
R3000H 35/65R33 ★★ 650 94 450 65
875/65R33 ★ 650 94 650 94
ARTICULATED TRUCKS
AD30 26.5R25 ★, ★★ 415 60 553 80 517 75 448 65 650 94 650 94
AD45B 29.5R29 ★★ 449 65 518 75 517 75 517 75 650 94 650 94
AD55 35/65R33 ★, ★★ 656 95 656 95 650 94 650 94
AD60 35/65R33 ★, ★★ 650 94 650 94
Optimal pressures may vary depending on specific applications and working conditions. Always consult your local tire supplier for operating pressures.
PHB-Sec32-14.indd 73PHB-Sec32-14.indd 73 12/20/13 9:14 AM12/20/13 9:14 AM
32-74 Edition 44
Tires Liquid Ballasting Table● 75% Fillage
BIAS PLY TIRES RADIAL PLY TIRES
Tire Size
Weight Increase Per Tire
Mixing Proportions Weight Increase Per Tire
Mixing Proportions
CaCl Water CaCl Water
kg lb kg lb L gal kg lb kg lb L gal
13.00-24TG 188 414 55 122 132 35 185 407 57 125 128 34
14.00-24TG 215 475 63 140 151 40 256 565 79 173 179 47
15.5-25 192 423 56 125 136 36 224 493 69 151 155 41
16.00-24TG 333 735 98 217 234 62 355 783 109 240 246 65
17.5-25 262 577 77 170 185 49 311 686 95 210 216 57
18.00-25 454 1002 134 296 322 85 502 1107 154 340 348 92
18.4-34 417 919 123 272 295 78 — — — — — —
20.5-25 405 892 119 263 284 75 448 987 137 303 310 82
23.1-26 522 1151 154 340 367 97 — — — — — —
23.5-25 585 1291 173 382 412 109 633 1396 194 428 439 116
24.5-32 703 1549 207 458 496 131 — — — — — —
26.5-25 758 1671 224 494 533 141 841 1853 258 568 583 154
26.5-29 752 1658 222 490 530 140 928 2045 284 627 644 170
28L-26 709 1563 209 462 500 132 — — — — — —
29.5-25 970 2139 286 632 685 181 1073 2368 328 723 745 197
29.5-29 1050 2315 310 684 738 195 1190 2623 365 804 825 218
29.5-35 1159 2556 344 758 821 217 1286 2835 394 869 892 236
30.5L-32 874 1928 258 570 617 163 — — — — — —
33.25-35 1485 3275 439 968 1048 277 1592 3508 487 1074 1105 292
37.25-35 1712 3775 505 1115 1211 320 2128 4692 653 1439 1476 390
38-39 1870 4123 552 1218 1317 348 — — — — — —
35/65-33 1339 2953 396 873 942 249 1430 3152 438 967 992 262
40/65-39 2077 4580 614 1353 1465 387 2194 4836 673 1483 1522 402
41.25/70-39 1897 4183 561 1236 1336 353 — — — — — —
45/65-45 2548 5617 753 1659 1794 474 — — — — — —
NOTE: Ballast weight for bias ply tires from Goodyear data, radial ply weights from Michelin data. Contact your tire supplier for additional information. Under abnormal tire wear conditions, ballasting of rear tires may be desirable. Ballasting of front tires also should only be done where extremely rapid tire wear rates are encountered. Excessive weight will reduce machine performance.
NOTE: Fillage beyond 75% of tire enclosed volume is not recommended. With liquid ballasting, inflation pressure must be checked at least once per day.
NOTE: 1.6 kg (31⁄2 lb) Calcium Chloride per gallon water. Solution weighs 4.6 kg (10.15 lb) per gallon.
NOTE: Total machine mass including all attachments in operating condition, all reservoirs at full capacity and ballasted tires must not exceed certification mass listed on the ROPS certification label.
NOTE: Special air to water valves are required for liquid filled tires.
PHB-Sec32-14.indd 74PHB-Sec32-14.indd 74 12/20/13 9:14 AM12/20/13 9:14 AM