DQD 507 Rev. 2012-05-22 Page 1
Certificate of Compliance Certificate: 70025997 Master Contract: 170351
Project: 70046788 Date Issued: 2015-09-16
Issued to: Bel Fuse Inc.
206 Van Vorst St
Jersey City, New Jersey 07302
USA
Attention: Editha S. Vergara
The products listed below are eligible to bear the CSA Mark shown
with adjacent indicators 'C' and 'US' for Canada and US or with adjacent
indicator 'US' for US only or without either indicator for Canada only.
Issued by: Maggie Lam
Maggie Lam
PRODUCTS
CLASS - 531111 - POWER SUPPLIES-Component Type (CSA 60950-1-07-2nd Ed)
CLASS - 531191 - POWER SUPPLIES-Component Type (UL 60950-1-2nd Ed)Certified to U.S.Stds
AC/DC Switching Power Supply, Models PET800-12-074NA and PET800-12-074RA; Input: 100-240 V ac, 9.5-
4.2 A, 50/60 Hz; Output: V1: 12 V dc/65 A, V2: 12 Vsb /2 A; Classification Level 6.
Model name may be followed by alpha numeric characters indicating non-safety critical options.
APPLICABLE REQUIREMENTS
CAN/CSA-C22.2 No 60950-1-
07, +Am.1:2011 +Am.2:2014 Information Technology Equipment - Safety - Part 1: General
Requirements
ANSI/UL 60950-1-2014 Information Technology Equipment - Safety - Part 1: General
Requirements
Certificate: 70025997
Project: 70046788
Master Contract: 170351
Date Issued: 2015-09-16
DQD 507 Rev. 2012-05-22 Page 2
CONDITIONS OF ACCEPTABILITY
1. Equipment shall be installed only by trained service personnel, according to the manufacturer installation
instructions.
2. Evaluated for use in a Pollution Degree 2 environment.
3. Temperature tests shall be considered for specific installation conditions in the end system.
4. Evaluated as Class I (earthed equipment). Reliable connection to Protective Earth shall be provided in the
end use installation.
5. Evaluated for connection to AC power with a branch circuit protector rated max 20 A.
6. The appliance inlet for the detachable power supply cord is considered the main disconnect device.
7. Spacings were evaluated for an operating altitude of max 5000 m, based on IEC-60664-1 altitude
correction factors.
8. Suitability of the enclosure provided with the equipment as a FIRE, MECHANICAL and ELECTRICAL
enclosure is to be determined in the end system. Front bezel was evaluated and complies with electrical
and mechanical requirements.
9. The Output circuits are SELV; Output V1 operates at hazardous energy levels (> 240 VA).
10. Limited Short circuit test was conducted on the GND trace from AC Inlet GND pin to chassis mounting
pad.
DQD 507 Rev. 2012-05-22 Page 1
Supplement to Certificate of Compliance
Certificate: 70025997 Master Contract: 170351
The products listed, including the latest revision described below,
are eligible to be marked in accordance with the referenced Certificate.
Product Certification History
Project Date Description
70046788 2015-09-16 Update report 70025997 to include model PET800-12-074RA.
70025997 2015-03-12 AC/DC Switching Power Supply, Model PET800-12-074NA. (C/US)
(Transferred from 173688-2729063 and upgraded to include Am2)
CERTIFICATENo. P15220414
Order No. 294983 Page 1/2
Date of issue 02-11-2015
Eunhye SongCertification Department
Nemko ASGaustadalléen 30, P.O. Box 73 Blindern, 0314 Oslo, NorwayTEL +47 22 96 03 30 FAX +47 22 96 05 50 EMAIL [email protected] NUMBER NO974404532 nemko.com
Product AC-DC switching power supply
Applicant Bel Fuse Inc.206 Van Vorst St.Jersey City, NJ 07302USA
Manufacturer Bel Fuse Inc.206 Van Vorst St.Jersey City, NJ 07302USA
Factory See page 2
Ratings Input: 9.5-4.2A, 100-240V~, 50/60Hz Output: V1: 65 A, 12 Vdc, 780 W ; V2: 2 A, 12V (stand by), 24 W ; 800 W
Trade mark
Model / Type Ref. PET800-12-074NA, PET800-12-074RA
Principal characteristics Cl. lThe model name may be followed by alpha numeric characters indicating non-safety critical options
See next page(s)
A sample of the product was testedand found to be in conformity with
OFF EN 60950-1:2006;A11;A1;A12;A2
Validity This certificate documents conformity with the standards shown, and also applies as license foruse of Nemkos name and certification mark. The certificate and license is valid as long as theapplicable conditions are complied with, and provided that any changes to the product are notifiedto Nemko for acceptance prior to implementation.New standards or amendments to the standards may imply that the product design must beupdated and/or that re-testing and re-certification is necessary.
Additional information See next page(s)
The abovementioned certified equipment complies with current regulatory requirements regardingelectrical safety in Norway and other EU/EEA member states, as far as this can be checked.Compliance with requirements regarding building-in, protection against electric shock andElectromagnetic Compatibility (EMC) must be checked when the equipment is built-in a completedproduct or forms a part of a complete system.
Additional model(s) See next page(s)
CERTIFICATENo. P15220414
Order No. 294983 Page 2/2
Date of issue 02-11-2015
Eunhye SongCertification Department
Nemko ASGaustadalléen 30, P.O. Box 73 Blindern, 0314 Oslo, NorwayTEL +47 22 96 03 30 FAX +47 22 96 05 50 EMAIL [email protected] NUMBER NO974404532 nemko.com
Factories:
BPS Asia Pacific Electronics (Shenzhen) Co., Ltd.Building# 6, Nanming Road, Gongming Town HuahongXintong Industrial Park, Guangming DistrictShenzhenChina 518108
Bel Power Solutions, s.r.o.Areal ZTS 92401841 Dubnica nad VahomSlovakia
Ref. Certif. No.
NO89136
Gaustadalléen 30NO-0373 Oslo, Norway
Date: 02-11-2015 Signature: Eunhye SongCertification Department
Issued 2007-04 1/2
IEC SYSTEM FOR MUTUAL RECOGNITION OF TEST CERTIFICATES FOR ELECTRICALEQUIPMENT (IECEE) CB SCHEME
SYSTEME CEI DACCEPTATION MUTUELLE DE CERTIFICATS DESSAIS DESEQUIPEMENTS ELECTRIQUES (IECEE) METHODE OC
CB TEST CERTIFICATE CERTIFICAT D'ESSAI OC
ProductProduit AC-DC switching power supply
Name and address of the applicantNom et adresse du demandeur
Bel Fuse Inc.206 Van Vorst St.Jersey City, NJ 07302USA
Name and address of the manufacturerNom et adresse du fabricant
Bel Fuse Inc.206 Van Vorst St.Jersey City, NJ 07302USA
Name and address of the factoryNom et adresse de l'usineNote: When more than one factory, please report on page 2Note: Lorsque il y plus d'une usine, veuillez utiliser la deuxième page
Additional information on page 2
Ratings and principal characteristicsValeurs nominales et caractéristiques principales
Input: 9.5-4.2A, 100-240V~, 50/60HzOutput: V1: 65 A, 12 Vdc, 780 W ; V2: 2 A, 12V (stand by), 24 W ;800 WCl. l
Trademark (if any)Marque de fabrique (si elle existe)
Type of Manufacturer’s Testing Laboratories usedType de programme du laboratoire d’essais constructeur
WMT
Model / Type Ref.Ref. De type
PET800-12-074NA, PET800-12-074RA
Additional information (if necessary may also bereported on page 2)Les informations complémentaires (si nécessaire,peuvent être indiqués sur la deuxième page
The model name may be followed by alpha numeric characters indicatingnon-safety critical options
Additional information on page 2
A sample of the product was tested and foundto be in conformity withUn échantillon de ce produit a été essayé et a étéconsidéré conforme à la
IEC 60950-1(ed.2);am1;am2
As shown in the Test Report Ref. No. which forms partof this CertificateComme indiqué dans le Rapport dessais numéro deréférence qui constitue partie de ce Certificat
294983
This CB Test Certificate is issued by the National Certification BodyCe Certificat dessai OC est établi par l'Organisme National de Certification
Ref. Certif. No.
NO89136
Gaustadalléen 30NO-0373 Oslo, Norway
Date: 02-11-2015 Signature: Eunhye SongCertification Department
Issued 2007-04 2/2
BPS Asia Pacific Electronics (Shenzhen) Co., Ltd.Building# 6, Nanming Road, Gongming Town HuahongXintong Industrial Park, Guangming DistrictShenzhenChina 518108
Bel Power Solutions, s.r.o.Areal ZTS 92401841 Dubnica nad VahomSlovakia