www.osram-os.com
Challenges of Outdoor Lighting & Solution Pathways
Kevin Tan | June 2018 | Webcast LEDs MagazineLight is OSRAM
OSRAM Opto Semiconductors | Webcast LEDs magazineKevin Tan I June 2018
2
AgendaNo Topics
1. Introduction
2. Challenges of Outdoor Lighting
3. Why work with OSRAM OS ?
4. OSRAM OS LED Technolgy and Package Design : OSLON® SQUARE, OSCONIQ® P and DURIS® S
5. Summary
OSRAM Opto Semiconductors | Webcast LEDs magazineKevin Tan I June 2018
3
Introduction of Outdoor Lighting
Outdoor lighting is the use of light in challenging outdoor condition to illuminate areas such as road, street, stadium, building, tunnel and etc.
It is essential to ensure the safety on driveways, steps and pedestrian pathways around residential area.
As outdoor lighting have more harsh environment than indoor lighting, the main criteria in choosing the right LEDs lies on the expected performance, lifetime, reliability requirement and fast pace dynamic development of LED technology.
In this webinar, OSRAM Opto Semiconductors will share our professional experiences in LEDs Package Design & Technology followed by series of state of the art outdoor products that could fit well into the application.
Specifically on White Epoxy Mold Compund (EMC) based LEDs, we have transferred our knowledge in automotive field in combining competitive lead frame technology and high power chips for supporting high volume market need of General Lighting.
OSRAM Opto Semiconductors | Webcast LEDs magazineKevin Tan I June 2018
4
Today’s challenges of a LED in modern environment
OSRAM Opto Semiconductors | Webcast LEDs magazineKevin Tan I June 2018
5
Application Requirement for Outdoor Lighting
Energy efficient - high brightness and great efficacy.
Intended beam angle and radiation pattern – lensed or without lensed LEDs.
Superior thermal resistance and heat dissipation & management for prolong lifetime.
Luminaire Ingression Protection needs to be waterproof (IP65 & above).
Total Cost of Ownership (TCO) – minimum (easy to install and service).
Superior long lifetime and reliability to minimize maintenance.(>50K hours or 10 -12 years)
Robust against moisture, corrosive and salty environment.
100% Instant Light – support dimming feature.
Street Light
Tunnel Light Stadium Light
Architectural Light
High Mast
Flood Light
OSRAM Opto Semiconductors | Webcast LEDs magazineKevin Tan I June 2018
6
AgendaNo Topics
1. Introduction
2. Challenges of Outdoor Lighting
3. Why work with OSRAM OS ?
4. OSRAM OS LED Technolgy and Package Design : OSLON® SQUARE, OSCONIQ® P and DURIS® S
5. Summary
OSRAM Opto Semiconductors | Webcast LEDs magazineKevin Tan I June 2018
7
Challenges of Outdoor Lighting
1. Broad range of Operating Temperatures• LED performance predominantly relies on the ambient temperature of the operating environment.• Adequate heatsinking or cooling is essential to maintain a long lifetime for LEDs.
2. Impacts of High Temperatures Variation• Accelerate the aging and degradation of luminaire system and LED components • Material expansion and contraction during temperature fluctuation will reduce significantly the reliability of LED
component interconnect and solder joint area of LEDs with PCB.
3. Humidity – Damn Environment• LED component absorbs moisture in high humidity environment and could damage LED chip inside the package.• Magnitude of electrostatic discharge (ESD) is higher in low humidity environment and could damage LED components inside
the luminaire.
4. Sulphur corrosion – Industrial Environment• Sulphur reacts with silver, Ag element in LED component to form Silver Sulfide, Ag2S, which causes significant brightness
degradation.
5. Salt corrosion – Salty Environment• Salt atmosphere origin from coastal area or de-icing salt on road can damage luminaire and also LED component inside it.
OSRAM Opto Semiconductors | Webcast LEDs magazineKevin Tan I June 2018
8
Outdoor temperature fluctuation imposes STRESS on LED solder joint !
• Outdoor temperature changes due to weather, climate and geographic location.• LED and PCB expand and contract when temperature changes, causing stress on solder joint.
Temperature change
Solder joint crack after long term thermal cycling.
LED and PCB expand at different frequency. It intensifies the stress on solder joint when there is CTE mismatch between LED and PCB.
Proven Finding: Ceramic LED & PCB CTE is typically 6x difference; EMC Leadframe LED & PCB CTE is only 2x difference. Larger size (eg: 5050 or 7070) has higher risk to CRACK !! Dimension is crucial !!
Note : CTE - Coefficient ot Thermal Expansion
OSRAM Opto Semiconductors | Webcast LEDs magazineKevin Tan I June 2018
9
Humidity impose moisture and ESD stress on LED component
Moisture level is high in high humidity environment. High risk of electrical short of LED component due to condensation.
Moisture will also be absorbed into LED component and could damage the LED.
Low humidity increases magnitude of electrostatic discharge (ESD) and could damage the LED chip.
LED needs to be designed with low permeability encapsulantand high ESD immunity to operate in wide humidity range.
OSRAM Opto Semiconductors | Webcast LEDs magazineKevin Tan I June 2018
10
Sulphur corrosion can lead to significant permanent brightness degradation
• Sulphur reacts with silver content inside LED and forms Silver Sulfide.
• Silver Sulfide is a black color crystal structure which can lead to brightness degradation as much as 30 –40%.
• Sources of Sulphur content:• Vehicle exhaust gas, in the form of SO2,
concentrated especially in tunnel.• Outgassing from rubber gaskets or seals of
luminaire (containing Sulphur compounds).
Plating on ceramic substrate turn dark due to Sulphur corrosion after test. Resulted >10% brightness degradation.
Before After
Plating on leadframesubstrate turn dark due to Sulphur corrosion after test. Resulted >10% brightness degradation.
OSRAM Opto Semiconductors | Webcast LEDs magazineKevin Tan I June 2018
11
Salty atmosphere can damage LED package or LED chip inside the package
• De-icing salt on road or bridges and coastal area create salty atmosphere in the environment.
• Salt compound may diffuse into LED package and damage LED chip inside the package.
• LED needs to be designed with low permeability encapsulant to prevent absorption in salty atmosphere.
Corroded LED chip.
OSRAM Opto Semiconductors | Webcast LEDs magazineKevin Tan I June 2018
12
AgendaNo Topics
1. Introduction
2. Challenges of Outdoor Lighting
3. Why work with OSRAM OS ?
4. OSRAM OS LED Technolgy and Package Design : OSLON® SQUARE, OSCONIQ® P and DURIS® S
5. Summary
OSRAM Opto Semiconductors | Webcast LEDs magazineKevin Tan I June 2018
13
Why to work with OSRAM OS? Leverage expertise from OSRAM OS to improve the profitability of your business.
STREETLIGHTING INDUSTRIAL LIGHTING
Automotive environment
condition
Street & Industrial
environment condition
~If failure
It’s about safety = human life engagement
It’s about warranty = money engagement
If failure
OSRAM Opto Semiconductors | Webcast LEDs magazineKevin Tan I June 2018
14
OSRAM OS What make the difference ?
OSRAM Opto Semiconductors | Webcast LEDs magazineKevin Tan I June 2018
15
Street & Industrial LightingHow to improve profitability?
Led X from Top3 Led supplier flagship product for street lighting with very long lifetime prediction of LM80/TM21 report. However after standard corrosion test…
Black = Silver has been corroded -5% loss of performance = Loss of
warranty = maintenance = Loss of money
OSRAM OSLON SquareOSCONIQ® P 3737 2WOSCONIQ® P 3737 3WOSCONIQ® P 7070
No silver No corrosion
What happens when using non-reliable LED?
Lifetime based in LM80/TM21 is not enough for outdoor applications.
We have quality reports, get in touch with your OSRAM OS partner
OSRAM Opto Semiconductors | Webcast LEDs magazineKevin Tan I June 2018
16
Street & Industrial LightingHow to improve profitability?
Led Y from Top3 Led supplier flagship product for street lighting with very long lifetime prediction of LM80/TM21 report.
However after temperature cycle test…
OSCONIQ® P 3737 2WOSCONIQ® P 3737 3WOSCONIQ® P 7070
What happens when using non-reliable LED?
Lifetime based in LM80/TM21 is not enough for outdoor applications.
Uf
(Chi
p 1,
700
.0m
A) [
%]
90.0
92.5
95.0
97.5
100.0
102.5
105.0
107.5
110.0
Readout [C]
0 200 400 600 800 1000 1200 1400
We have quality reports, get in touch with your OSRAM OS partner
OSRAM Opto Semiconductors | Webcast LEDs magazineKevin Tan I June 2018
17
Standard Tests Performed Condition DurationResistance to soldering heat (RTSH) JESD22-A113
Reflow soldering 260°C
3x
Temperature & humidity bias (T&HB)JESD22-A101
TA =85, R.H.= 85%;IF = 100mA
1000h
Temperature storage (TS) JESD22-A101
TA = -40°C, 1000h
Temperature cycle (TC)JESD22-A104
-40°C/+125°C15min each extreme
1000c
Steady state life test (SSLT)JESD22-A108
TA = -40°CIF = 1800mA
1000h
Steady state life test (SSLT)JESD22-A108
TA = 100°CIF = 1800mA 1000h
Steady state life test (SSLT)JESD22-A108
TA = 125°CIF = 800mA 1000h
Steady state life test (SSLT)JESD22-A108
TA = 125°CIF = 1400mA(overstress)
1000h
Pulse life test (PLT)JESD22-A108
TA = 55°CIF = 2000mAtp = 0.1ms; DC = 3%
1000h
Hydrogen Sulphide TestIEC 60068-2-43
15ppm H2S25°C/75%R.H. H
15ppm H2S 40°C/90%R.H.
504h
336hElectro Static Discharge (ESD)ANSI/IESDA/JEDEC JS-001
Human Body Model 8000V
OSRAM OS Qualification Process assures Product Quality before market launch
• OSRAM Opto Semiconductors product qualification process is developed based on widely recognized industry standard (JEDEC, IEC, ANSI & etc.).
• Product passing the qualification tests is confident to operate under actual field application condition.
OSRAM Opto Semiconductors | Webcast LEDs magazineKevin Tan I June 2018
18
Street & Industrial LightingHow to improve profitability?
What happens when using low Performance LED?Led A: 310lm @700mA 2,8V Ts85C 158lm/WLed B: 298lm @700mA 2,8V Ts85C 152lm/WΔperformance=158/152 +4%
If Led B has to reach the same performance of Led A =158lm/W Underdrive Led B:Led B : 248lm @560mA 2,76V Ts85C 158lm/W ΔLed Count=310/248 +25% Led B needs to be 25% cheaper than Led A
Using lower performance LED = Using more LED = Using more Lenses = Using more PCB Surface.
Using 4% better performance LED
ΔPerformance
ΔPrice
OSRAM Opto Semiconductors | Webcast LEDs magazineKevin Tan I June 2018
19
AgendaNo Topics
1. Introduction
2. Challenges of Outdoor Lighting
3. Why work with OSRAM OS ?
4. OSRAM OS LED Technolgy and Package Design : OSLON® SQUARE, OSCONIQ® P and DURIS® S
5. Summary
OSRAM Opto Semiconductors | Webcast LEDs magazineKevin Tan I June 2018
20
OSRAM Opto UX:3Leading LED Chip Technology for High-Power
Ideal Chip Technology for High-Power Applications requiring high flux density, efficacy and superior robustness.
Used in high volume >10 years for Outdoor and Industrial Lighting, Automotive, and many more.
UX:3 Surface EmittersUniform light extraction Uniform current linearity Ultimate thermal resistance
OSRAM Opto Semiconductors | Webcast LEDs magazineKevin Tan I June 2018
21
OSRAM UX:3 Chip TechnologyComparison to Sapphire Chips
UX3 Chip Sapphire Chip
Emission Characteristics
Surface Emitter NO side emission
Volume EmitterSide emission
Chip to Chip spacing in CoBs
≤150umNO crosstalk !
< 400um Crosstalk
LuminousIntensity Very High Moderate
Efficacy High HighTyp. current range 0.05 – 3 A 0.01 – 0.25 AOSRAM Products OSLON Square, OSCONIQ P DURIS S5, S8, S10
n p
OSRAM Opto Semiconductors | Webcast LEDs magazineKevin Tan I June 2018
22
1. OSLON® SQUARE integrated with BEST technology to overcome outdoor challenges
Plating
- Plated with anti-corrosion alloy.
- Superior performance against Sulphur corrosion.
LED Encapsulant
- Very low permeability silicon material.- Effectively prevents moisture
absorption and other contaminant penetration.
ESD Diode
- Built in high grade ESD diode.- Ability to withstand up to ESD
8kV.
Substrate
- Aluminium nitride ceramic material with highest thermal conductivity.
- Provides better thermal dissipation.
Chip
- Highly efficient LED chip based on OSRAM-OS ThinGaN technology.
- Excellent efficacy at high driving current.
• Top efficacy in industry.• Superior robustness and long lifetime.• Superior performance against corrosion.
OSRAM Opto Semiconductors | Webcast LEDs magazineKevin Tan I June 2018
23
OSLON® SQUARE Evolution Roadmap
Next Gen OSLON(Y2020)
OSLON SQUARE Gen 5
(2019)340-355lm
(170-180lm/W)
>180lm/W
2018/192020
OSLON SQUARE Gen 3
(Giant)OSLON
SQUARE SCOSLON SQUARE LT
<280lm(140lm/W)
280-300lm(140-150lm/W)
300-325lm(150-165lm/W)
< 20142014/15
2016/17Started 2005/6
OSLON SQUARE Gen 4
(Q4 2018)325-340lm
(165-175lm/W)
2017/18
OSRAM Opto Semiconductors | Webcast LEDs magazineKevin Tan I June 2018
24
2. OSCONIQ® P - QFN EMC Package with Long Lifetime Incorporated Know-How from OSRAM Automotive
Plating
- Plated with anti-corrosion alloy.
- Superior performance against Sulphur corrosion.
LED Encapsulant
- Very low permeability silicon material.- Effectively prevents moisture
absorption and other contaminant penetration.
ESD Diode
- Built in high grade ESD diode.- Ability to withstand up to ESD
8kV.
Chip
- Highly efficient LED chip based on OSRAM-OS ThinGaN technology.
- Excellent efficacy at high driving current.
Packaging
- High grade epoxy molded compound + metal leadframe.
- CTE closely matched with PCB to eliminate solder joint crack due to CTE mismatch.
• High efficacy• Superior robustness and long lifetime.• Superior performance against
corrosion.
OSRAM Opto Semiconductors | Webcast LEDs magazineKevin Tan I June 2018
25
OSCONIQ® P Package Construction
Reliable Package Design and Superior Corrosion Robustness
Surface emitting
chip
Compared to other EMC LEDs,OSCONIQ® P series eliminate luminous flux degradation by package browning due to superior packaging design. • Surface top emitting chip (no side emitted lights)• TiO2 protection layer (cavity is protected) • Light extracting lens (direct light upward).
OSRAM Opto Semiconductors | Webcast LEDs magazineKevin Tan I June 2018
26
OSCONIQ® PSuperior Solder Joint Reliability
Thermal cycling stress is causing fatigue failures, especially in the solder jointcomes down to lifetimes beyond 15K hours.
Outdoor luminaires are exposed to large temperature variations, increasing stress on the solder joint between LED and PCB.
Under extension Accelerated Life Test (ALT), OSCONIQ® P shows superior resistance to thermal cycling stress.
ALT : induce field failure in lab at much faster rate, harsher & representative environment.
Failure Criteria : Standard IPC-9701 (PERFORMANCE TEST METHODS AND QUALIFICATION REQUIREMENTS FOR SURFACE MOUNT SOLDER ATTACHMENTS) defines 20% increase of resistance as a failure. It corresponds to +2% increase in Uf by considering the LED diode behavior.
360 cycles from 10°C to 50°C per year (due to on/off-switching)
In addition long-term cycles: 20x delta T of 90°C (e.g. -20°C/+70°C) per year. (frost, intensive solar radiation)
Exemplary real life data:
Paper published by J.Kloosterman from Philips Lighting. Solder Joint Reliability in SSL Application.
OSRAM Opto Semiconductors | Webcast LEDs magazineKevin Tan I June 2018
27
Solder Joint Reliability : Accelerated Thermal Cycling OSCONIQ® P7070 vs Competitors
Thermal Cycles
Res
ista
nce
+20%
Competitor C Competitor L
• Competitors Results: CTE Mismatch -> Cracked Solder JointsAluminium Nitride ceramic -> Significant CTE mismatch
• P7070 stable, 6000+ thermal cycles• No Vf-increase, no cracks found.
OSCONIQ® P7070
TC -4
0/85
°CTC
-40/
110°
C
Epoxy molded compound (EMC) + metal lead frame -> NO CTE mismatch
OSRAM Opto Semiconductors | Webcast LEDs magazineKevin Tan I June 2018
28
OSCONIQ® P series covers all brightness ranges from 1W - 12Wat Highest Quality and Performance Standards
OSCONIQ P 3737 (2W)GW PUSRA1.PM317 lm ; 162 lm/W1)
2 mm2 chip3.7 x 3.7 mm2 footprint700mA…1500mA
OSCONIQ P 3737 (3W)GW PUSTA1.PM479 lm ; 166 lm/W1)
GW PULTA1.CM (Flat)350 lm ; 121 lm/W 4 mm2 chip3.7 x 3.7 mm2 footprint1050mA…3000mA
1) 85 °C, 5000 K, CRI70
OSCONIQ P 7070 (8-12W)GW P7STA1.PM1190 lm ; 148 lm/W1)
4 x 2 mm2 chips7 x 7 mm2 footprint700mA…1000mA; 12V1400mA…2000mA ; 6V
OSCONIQ P 3030 (1W)GW QSSPA1.PM160 lm ; 163 lm/W1)
1 mm2 chip3.0 x 3.0 mm2 footprint350mA…1300mA
OSRAM Opto Semiconductors | Webcast LEDs magazineKevin Tan I June 2018
29
3. Chip Array SMD (CAS) DURIS® S8 & S10 Designed for Economical Consumer Outdoor
Outdoor / Industrial High Efficacy
>170 lm/W @ 3.6W, 25’C CRI 70≥ 200lm/W @ 1W
Low LED count designs Long Lifetime
L70>54khrs, Ts=85’C Proven Outdoor Robustness Pass Salt-Fog and H2S test
Residential Streetlight
High Bay
Flood Light Parking
Sconce LightsCanopy
DURIS® S8 WEMC
Silicone filled with phosphor Leadframe
50
60
70
80
90
100
110
0 1,000 2,000 3,000 4,000 5,000 6,000 7,000 8,000 9,000
Lum
en M
aint
enan
ce (%
)
Time (h)
55 °C / 200 mA
85 °C / 200 mA
105 °C / 200 mA
115 °C / 200 mA
L70 EoL
OSRAM Opto Semiconductors | Webcast LEDs magazineKevin Tan I June 2018
30
Advantages of DURIS® S8 & S10 for Outdoor LightingSignificant saving in System Cost
lm/W
Price
Low/Mid Power (2835 / 3030)
High Power 1W-2W Ceramics
DURIS® S8
DURIS® S10
> 200lm/W
System costreduction
Advantages vs Low/Mid Power Suitable for High Efficacy design
>>150lm/W Less LEDs & Design space, more
compact. Simple Optics, cheaper system cost
Advantages vs Ceramics Up to 20% Higher Efficacy
when under drive at 1-2W Less LEDs, cheaper system
cost
OSRAM Opto Semiconductors | Webcast LEDs magazineKevin Tan I June 2018
31
AgendaNo Topics
1. Introduction
2. Challenges of Outdoor Lighting
3. Why work with OSRAM OS ?
4. OSRAM OS LED Technolgy and Package Design : OSLON® SQUARE, OSCONIQ® P and DURIS® S
5. Summary
OSRAM Opto Semiconductors | Webcast LEDs magazineKevin Tan I June 2018
32
Street & Industrial LightingWith which products?
New
Product Positioning and Strengths:
OSCONIQ® P 3737 2W
OSCONIQ® P 3737 3W
OSCONIQ® P 7070
OSLON® Square 3030
Flagship withindustry
leading lm/W
Value option with
high lm/$ and lm/W
Large die option for
boosting lm/W and / or
reducing LED count
Multi-die option withhigh flux for
reducingsystem cost
DURIS® S 8 DURIS® S 10
Multi-die sapphire LED with scalable flux output at highest lm/$
Multi-die sapphire LED with scalable and highest
flux output at highest lm/$
Award for the most seen product
OSRAM Opto Semiconductors | Webcast LEDs magazineKevin Tan I June 2018
33
Out
door
robu
stne
ss
Premium
Improved
200 300 400 500 600 700 800 900 1000 1100 1200 1300 1400 1500 1600 1700 1800
Ballpark Flux (lm) per LED at typ. current
Street & Industrial LightingWith which products?
New
DURIS® S 8 DURIS® S 10
values based on CRI70 / 5000K
OSLON® Square
OSCONIQ® P 3737 2W OSCONIQ® P 3737 3W OSCONIQ® P 7070
OSRAM Opto Semiconductors | Webcast LEDs magazineKevin Tan I June 2018
34
Street & Industrial LightingWith which products?
Type Q3 2018 Performance*
OSLON® SquareGW CSSRM2.PM3030
Std bin 320lm N5@T85C – 700mA – Vf=2,8V
OSCONIQ® P 3737 2W GW PUSRA1.PM3737
Std bin 310lm N4@T85C – 700mA – Vf=2,8V
OSCONIQ® P 3737 3WGW PUSTA1.PM3737
Std bin 460lm NE@T85C – 1050mA – Vf=2,75V
OSCONIQ® P 7070 8WGW P7STA1.PM7070
Std bin 1160lm VJ @T85C – 700mA – Vf=11,5V
DURIS® S8-10chipGW P9LT32.PM5050
Std bin 658lm QP@T25C – 750mA – Vf=6.3V
DURIS® S10-24chipGW P7LP32.PM7070
Std bin 1640lm RU@T25C – 300mA – Vf=38V
*subject to change
*Performance for 5000K – CRI70 min
New
Device LM80
OSLON® Square@700mA – Ts85
L70(9k) > 54kh – L90(9k) >54khDLC premium achieved
OSCONIQ® P 3737 2W@700mA – Ts85
L70(10k) > 60kh – L90(9k) >30khDLC achieved
OSCONIQ® P 3737 3W@1050mA - Ts85
L70 (7k) > 42kh - L90 (7k) > 42 khDLC premium achieved
OSCONIQ® P 7070 8W@700mA – Ts85
L70 (6k) > 36kh - L90 (6k) > 36 khDLC premium achievedNote : Aug 18 for 9kh data.
DURIS® S8@150mA – Ts85
L70(6k) > 36kh – L90(6k) >36khDLC premium achieved
DURIS® S10@300mA – Ts85
L70(6k) > 36kh – L90(6k) >36khDLC premium achieved
DLC Premium is a higher-performance classification for luminaires and retrofit kits. Requirements: L70 ≥50,000 hours + L90 of >36,000 hours.
OSRAM Opto Semiconductors | Webcast LEDs magazineKevin Tan I June 2018
35
Contact
Kevin Tan
General Lighting Application EngineeringOSRAM Opto Semiconductors (Malaysia) Sdn. Bhd.
Email : [email protected] : +6019 477 0467
OSRAM Opto Semiconductors | Webcast LEDs magazineKevin Tan I June 2018
36
THANK YOU