Download - Chapter 1 - Operating Cisco IOS Devices
![Page 1: Chapter 1 - Operating Cisco IOS Devices](https://reader034.vdocument.in/reader034/viewer/2022042615/55cf8f43550346703b9a91ea/html5/thumbnails/1.jpg)
1
CCNA Routing & Switching
Chapter 1
Operating Cisco IOS Devices
![Page 2: Chapter 1 - Operating Cisco IOS Devices](https://reader034.vdocument.in/reader034/viewer/2022042615/55cf8f43550346703b9a91ea/html5/thumbnails/2.jpg)
© 2005 Cisco Systems, Inc. All rights reserved. INTRO v2.1—8-2
Cisco IOS Software
• Features to carry the chosen network protocols and functions
• Connectivity for high-speed traffic between devices
• Security to control access and prohibit unauthorized network use
• Scalability to add interfaces and capability as needed for network growth
• Reliability to ensure dependable access to networked resources
![Page 3: Chapter 1 - Operating Cisco IOS Devices](https://reader034.vdocument.in/reader034/viewer/2022042615/55cf8f43550346703b9a91ea/html5/thumbnails/3.jpg)
© 2005 Cisco Systems, Inc. All rights reserved. INTRO v2.1—8-3
Configuring Network Devices
• Configuration sets up the device with the following:
– Network policy of the functions required
– Protocol addressing and parameter settings
– Options for administration and management
• Catalyst switch memory has initial configuration with default settings.
• A Cisco router will prompt for initial configuration if there is no configuration in memory.
![Page 4: Chapter 1 - Operating Cisco IOS Devices](https://reader034.vdocument.in/reader034/viewer/2022042615/55cf8f43550346703b9a91ea/html5/thumbnails/4.jpg)
© 2005 Cisco Systems, Inc. All rights reserved. INTRO v2.1—8-4
• Configurations can come from many sources.
• Configurations will act in device memory.
Console Port
Auxiliary Port
Interfaces
PC or UNIX Server
Web or Network ManagementServer
Virtual Terminal
External Configuration Sources
Telnet
TFTP
![Page 5: Chapter 1 - Operating Cisco IOS Devices](https://reader034.vdocument.in/reader034/viewer/2022042615/55cf8f43550346703b9a91ea/html5/thumbnails/5.jpg)
© 2005 Cisco Systems, Inc. All rights reserved. INTRO v2.1—8-5
• A CLI is used to enter commands.
• Operations vary on different internetworking devices.
• Users type or paste entries in the console command modes.
• Command modes have distinctive prompts.
• Enter key instructs device to parse and execute the command.
• Two primary EXEC modes are user mode and privileged mode.
Cisco IOS User Interface Functions
![Page 6: Chapter 1 - Operating Cisco IOS Devices](https://reader034.vdocument.in/reader034/viewer/2022042615/55cf8f43550346703b9a91ea/html5/thumbnails/6.jpg)
© 2005 Cisco Systems, Inc. All rights reserved. INTRO v2.1—8-6
There are two main EXEC modes for entering commands.
Cisco IOS Software EXEC Mode (User)
![Page 7: Chapter 1 - Operating Cisco IOS Devices](https://reader034.vdocument.in/reader034/viewer/2022042615/55cf8f43550346703b9a91ea/html5/thumbnails/7.jpg)
© 2005 Cisco Systems, Inc. All rights reserved. INTRO v2.1—8-7
Cisco IOS Software EXEC Mode (Privileged)
![Page 8: Chapter 1 - Operating Cisco IOS Devices](https://reader034.vdocument.in/reader034/viewer/2022042615/55cf8f43550346703b9a91ea/html5/thumbnails/8.jpg)
© 2005 Cisco Systems, Inc. All rights reserved. INTRO v2.1—8-8
Logging In to the Switch and Entering the Enable Password
>> enableEnter password:## disable
User-Mode Prompt User-Mode Prompt
Privileged-Mode Prompt Privileged-Mode Prompt
Console
![Page 9: Chapter 1 - Operating Cisco IOS Devices](https://reader034.vdocument.in/reader034/viewer/2022042615/55cf8f43550346703b9a91ea/html5/thumbnails/9.jpg)
© 2005 Cisco Systems, Inc. All rights reserved. INTRO v2.1—8-9
User and Privileged mode
Router>enable
Password:zzzzz
Router#
Router#disable
Router>
Privileged
mode*
User
mode
Telnet
Aux
Console
*Also called Enable mode
![Page 10: Chapter 1 - Operating Cisco IOS Devices](https://reader034.vdocument.in/reader034/viewer/2022042615/55cf8f43550346703b9a91ea/html5/thumbnails/10.jpg)
© 2005 Cisco Systems, Inc. All rights reserved. INTRO v2.1—8-10
CLI Help Features
What you type The help you get
? Help for all commands available in this mode
help Text describing how to get help. No actual command help is given
Command ? Text help describing all the first parameter options for the command
Com? A list of commands that start with “com”
Command parm? This style of help lists all parameters beginning with “parm”
(Notice that no spaces exist between parm and the ?)
Command parm<Tab> If you press the TAB key midword, the CLI either spells the rest of the parameter at the command line or does nothing. If the CLI does nothing, it means that this string of characters represents more than one possible next parameter, so the CLI does not know which to spell out.
Command parm1 ? If a space is inserted before the question mark, the CLI lists all the next parameters and gives a brief explanation of each.
![Page 11: Chapter 1 - Operating Cisco IOS Devices](https://reader034.vdocument.in/reader034/viewer/2022042615/55cf8f43550346703b9a91ea/html5/thumbnails/11.jpg)
© 2005 Cisco Systems, Inc. All rights reserved. INTRO v2.1—8-11
• You can abbreviate a command to the fewest characters that make a unique character string.
Router User-Mode Command List
wg_ro_c>?Exec commands: access-enable Create a temporary Access-List entry atmsig Execute Atm Signalling Commands cd Change current device clear Reset functions connect Open a terminal connection dir List files on given device disable Turn off privileged commands disconnect Disconnect an existing network connection enable Turn on privileged commands exit Exit from the EXEC help Description of the interactive help system lat Open a lat connection lock Lock the terminal login Log in as a particular user logout Exit from the EXEC-- More --
![Page 12: Chapter 1 - Operating Cisco IOS Devices](https://reader034.vdocument.in/reader034/viewer/2022042615/55cf8f43550346703b9a91ea/html5/thumbnails/12.jpg)
© 2005 Cisco Systems, Inc. All rights reserved. INTRO v2.1—8-12
wg_ro_c#?Exec commands: access-enable Create a temporary Access-List entry access-profile Apply user-profile to interface access-template Create a temporary Access-List entry bfe For manual emergency modes setting cd Change current directory clear Reset functions clock Manage the system clock configure Enter configuration mode connect Open a terminal connection copy Copy from one file to another debug Debugging functions (see also 'undebug') delete Delete a file dir List files on a filesystem disable Turn off privileged commands disconnect Disconnect an existing network connection enable Turn on privileged commands erase Erase a filesystem exit Exit from the EXEC help Description of the interactive help system-- More --
Router Privileged-Mode Command List
• You can complete a command string by entering the unique character string, then pressing the Tab key.
![Page 13: Chapter 1 - Operating Cisco IOS Devices](https://reader034.vdocument.in/reader034/viewer/2022042615/55cf8f43550346703b9a91ea/html5/thumbnails/13.jpg)
© 2005 Cisco Systems, Inc. All rights reserved. INTRO v2.1—8-13
Router Command-Line Help Facilities
Context-Sensitive Help Console Error Messages
Identify problems with router commands that are incorrectly entered so that you can alter or correct them
Allows recall of long or complex commands or entries for reentry, review, or correction
Command History Buffer
Provides a list of commands and the arguments associated with a specific command
![Page 14: Chapter 1 - Operating Cisco IOS Devices](https://reader034.vdocument.in/reader034/viewer/2022042615/55cf8f43550346703b9a91ea/html5/thumbnails/14.jpg)
© 2005 Cisco Systems, Inc. All rights reserved. INTRO v2.1—8-14
Router Context-Sensitive Help
Router# clok
Translating "CLOK"
% Unknown command or computer name, or unable to find computer address
Router# cl?
clear clock
Router# clock
% Incomplete command.
Router# clock ?
set Set the time and date
Router# clock set
% Incomplete command.
Router# <Ctrl-P>clock set ?
hh:mm:ss Current Time
• Symbolic Translation
• Command Prompting
• Last Command Recall
![Page 15: Chapter 1 - Operating Cisco IOS Devices](https://reader034.vdocument.in/reader034/viewer/2022042615/55cf8f43550346703b9a91ea/html5/thumbnails/15.jpg)
© 2005 Cisco Systems, Inc. All rights reserved. INTRO v2.1—8-15
Router Context-Sensitive Help (cont.)
Router# clok
Translating "CLOK"
% Unknown command or computer name, or unable to find computer address
Router#
clear clock
Router#
% Incomplete command.
Router#
set Set the time and date
Router#
% Incomplete command.
Router#
hh:mm:ss Current Time
Router# clock set 19:56:00
% Incomplete command.
Router# clock set 19:56:00 ?
<1-31> Day of the month
MONTH Month of the year
Router# clock set 19:56:00 04 8
^
% Invalid input detected at the '^' marker
Router# clock set 19:56:00 04 August
% Incomplete command.
Router# clock set 19:56:00 04 August ?
<1993-2035> Year
• Command Prompting
• Syntax Checking
• Command Prompting
![Page 16: Chapter 1 - Operating Cisco IOS Devices](https://reader034.vdocument.in/reader034/viewer/2022042615/55cf8f43550346703b9a91ea/html5/thumbnails/16.jpg)
© 2005 Cisco Systems, Inc. All rights reserved. INTRO v2.1—8-16
Router>Shape the future of internetworking by creating unpreced
Using Enhanced Editing CommandsUsing Enhanced Editing Commands
Shape the future of internetworking by creating unprecedented value for customers, employees, and partners.
![Page 17: Chapter 1 - Operating Cisco IOS Devices](https://reader034.vdocument.in/reader034/viewer/2022042615/55cf8f43550346703b9a91ea/html5/thumbnails/17.jpg)
© 2005 Cisco Systems, Inc. All rights reserved. INTRO v2.1—8-17
Router>$ future of internetworking by creating unprecedented op
Using Enhanced Editing Commands
(Automatic scrolling of long lines).
![Page 18: Chapter 1 - Operating Cisco IOS Devices](https://reader034.vdocument.in/reader034/viewer/2022042615/55cf8f43550346703b9a91ea/html5/thumbnails/18.jpg)
© 2005 Cisco Systems, Inc. All rights reserved. INTRO v2.1—8-18
Router>Shape the value of internetworking by creating unpreced
Using Enhanced Editing Commands
(Automatic scrolling of long lines).
<Ctrl-A> Move to the beginning of the command line.
![Page 19: Chapter 1 - Operating Cisco IOS Devices](https://reader034.vdocument.in/reader034/viewer/2022042615/55cf8f43550346703b9a91ea/html5/thumbnails/19.jpg)
© 2005 Cisco Systems, Inc. All rights reserved. INTRO v2.1—8-19
Router>$ value for customers, employees, and partners.
Using Enhanced Editing Commands
(Automatic scrolling of long lines).
<Ctrl-A> Move to the beginning of the command line.
<Ctrl-E> Move to the end of the command line.
![Page 20: Chapter 1 - Operating Cisco IOS Devices](https://reader034.vdocument.in/reader034/viewer/2022042615/55cf8f43550346703b9a91ea/html5/thumbnails/20.jpg)
© 2005 Cisco Systems, Inc. All rights reserved. INTRO v2.1—8-20
Using Enhanced Editing Commands
(Automatic scrolling of long lines).
<Ctrl-A> Move to the beginning of the command line.
<Ctrl-E> Move to the end of the command line.
<Esc-B> Move back one word.
Router>$ value for customers, employees, and partners.
![Page 21: Chapter 1 - Operating Cisco IOS Devices](https://reader034.vdocument.in/reader034/viewer/2022042615/55cf8f43550346703b9a91ea/html5/thumbnails/21.jpg)
© 2005 Cisco Systems, Inc. All rights reserved. INTRO v2.1—8-21
Using Enhanced Editing Commands
(Automatic scrolling of long lines).
<Ctrl-A> Move to the beginning of the command line.
<Ctrl-E> Move to the end of the command line.
<Esc-B> Move back one word.
<Ctrl-F> Move forward one character.
Router>$ value for customers, employees, and partners.
![Page 22: Chapter 1 - Operating Cisco IOS Devices](https://reader034.vdocument.in/reader034/viewer/2022042615/55cf8f43550346703b9a91ea/html5/thumbnails/22.jpg)
© 2005 Cisco Systems, Inc. All rights reserved. INTRO v2.1—8-22
Using Enhanced Editing Commands
(Automatic scrolling of long lines).
<Ctrl-A> Move to the beginning of the command line.
<Ctrl-E> Move to the end of the command line.
<Esc-B> Move back one word.
<Ctrl-F> Move forward one character.
<Ctrl-B> Move back one character.
Router>$ value for customers, employees, and partners.
![Page 23: Chapter 1 - Operating Cisco IOS Devices](https://reader034.vdocument.in/reader034/viewer/2022042615/55cf8f43550346703b9a91ea/html5/thumbnails/23.jpg)
© 2005 Cisco Systems, Inc. All rights reserved. INTRO v2.1—8-23
Using Enhanced Editing Commands
(Automatic scrolling of long lines).
<Ctrl-A> Move to the beginning of the command line.
<Ctrl-E> Move to the end of the command line.
<Esc-B> Move back one word.
<Ctrl-F> Move forward one character.
<Ctrl-B> Move back one character.
<Esc-F> Move forward one word.
Router>$ value for customers, employees, and partners.
![Page 24: Chapter 1 - Operating Cisco IOS Devices](https://reader034.vdocument.in/reader034/viewer/2022042615/55cf8f43550346703b9a91ea/html5/thumbnails/24.jpg)
© 2005 Cisco Systems, Inc. All rights reserved. INTRO v2.1—8-24
(Automatic scrolling of long lines.)
Ctrl-A
Ctrl-E
Esc-B
Esc-F Move forward one word.
Ctrl-B Move back one character.
Ctrl-F Move forward one character.
Using Enhanced Editing CommandsUsing Enhanced Editing Commands
Ctrl-D Delete a single character.
Router>$ value for customers, employees, and partners.
Move to the end of the command line.
Move back one word.
Move to the beginning of the command line.
![Page 25: Chapter 1 - Operating Cisco IOS Devices](https://reader034.vdocument.in/reader034/viewer/2022042615/55cf8f43550346703b9a91ea/html5/thumbnails/25.jpg)
© 2005 Cisco Systems, Inc. All rights reserved. INTRO v2.1—8-25
Ctrl-P or Up Arrow Last (previous) command recall.
Ctrl-N or Down Arrow More recent command recall.
Router> show history Show command buffer contents.
Router> terminal history size lines Set session command buffer size.
Reviewing Router Command History
![Page 26: Chapter 1 - Operating Cisco IOS Devices](https://reader034.vdocument.in/reader034/viewer/2022042615/55cf8f43550346703b9a91ea/html5/thumbnails/26.jpg)
© 2005 Cisco Systems, Inc. All rights reserved. INTRO v2.1—8-26
Configuring Cisco IOS SoftwareConfiguring Cisco IOS Software
Configuration Modes:• Global configuration mode
– wg_sw_a# conf term
– wg_sw_a(config)#
• Interface configuration mode
– wg_sw_a(config)# interface fa0/1
– wg_sw_a(config-if)#
![Page 27: Chapter 1 - Operating Cisco IOS Devices](https://reader034.vdocument.in/reader034/viewer/2022042615/55cf8f43550346703b9a91ea/html5/thumbnails/27.jpg)
© 2005 Cisco Systems, Inc. All rights reserved. INTRO v2.1—8-27
Configuring Router IdentificationConfiguring Router Identification
• Sets the local identity or message for the accessed router or interface
Router NameRouter(config)#hostname wg_ro_cwg_ro_c(config)#
Interface Descriptionwg_ro_c(config)#interface ethernet 0wg_ro_c(config-if)#description Engineering LAN, Bldg. 18
The name must follow the rules for ARPANET host names. They must start with a letter, end with a letter or digit, and have as interior characters only letters, digits, and hyphens. Names can be up to 63 characters.
![Page 28: Chapter 1 - Operating Cisco IOS Devices](https://reader034.vdocument.in/reader034/viewer/2022042615/55cf8f43550346703b9a91ea/html5/thumbnails/28.jpg)
© 2005 Cisco Systems, Inc. All rights reserved. INTRO v2.1—8-28
Configuring Router IdentificationConfiguring Router Identification
Message-of-the-Day Banner
You can create a single or multiline message banner that appears on the screen when someone logs in tothe Cisco device.
wg_ro_3(config)#banner motd # Accounting DepartmentYou have entered a secured system. Authorized accessonly! #
# represents the delimiting character in the message above
•For message, enter a banner message up to 255 characters. You cannot use the delimiting character in the message.
•To delete the either banner, use the no banner motd global configuration command.
![Page 29: Chapter 1 - Operating Cisco IOS Devices](https://reader034.vdocument.in/reader034/viewer/2022042615/55cf8f43550346703b9a91ea/html5/thumbnails/29.jpg)
© 2005 Cisco Systems, Inc. All rights reserved. INTRO v2.1—8-29
Enable Password
Router(config)#enable password cisco
Secret PasswordRouter(config)#enable secret sanfran
Router Password Configuration
•If both the enable password and secret are configured the enable exec command only accepts the password defined in the enable secret command
•Enable passwords are encrypted using the “service password-encryption”
•Enable secrets are stored as MD-5 hashed values instead of being encrypted
Router(config)#service password-encryption
![Page 30: Chapter 1 - Operating Cisco IOS Devices](https://reader034.vdocument.in/reader034/viewer/2022042615/55cf8f43550346703b9a91ea/html5/thumbnails/30.jpg)
© 2005 Cisco Systems, Inc. All rights reserved. INTRO v2.1—8-30
Router(config)#line console 0Router(config-line)#password ciscoRouter(config-line)#login
Console Password
Virtual Terminal Password
Router(config)#line vty 0 4Router(config-line)#password sanjoseRouter(config-line)#login
Router Password Configuration
Router(config)#service password-encryption
Show runEnable secret 5 $%F£$YH*(IHHF£”WEF^&?JK – 5 signifies a hashed valueEnable password 7 32e3498bc – 7 signifies an encrypted value..line vty 0 4login password 7 34246a238dw - 7 signifies an encrypted value
![Page 31: Chapter 1 - Operating Cisco IOS Devices](https://reader034.vdocument.in/reader034/viewer/2022042615/55cf8f43550346703b9a91ea/html5/thumbnails/31.jpg)
© 2005 Cisco Systems, Inc. All rights reserved. INTRO v2.1—8-31
Router(config)#interface type module number/int numberRouter(config-if)#
Configuring an InterfaceConfiguring an Interface
• type includes serial, ethernet, token ring, fddi, hssi, loopback, dialer, null, async, atm, bri, and tunnel
• number is used to identify individual interfaces
Router(config-if)#exit
• Quits from current interface configuration mode
Router(config)#interface type slot/portRouter(config-if)#
• For modular routers
![Page 32: Chapter 1 - Operating Cisco IOS Devices](https://reader034.vdocument.in/reader034/viewer/2022042615/55cf8f43550346703b9a91ea/html5/thumbnails/32.jpg)
© 2005 Cisco Systems, Inc. All rights reserved. INTRO v2.1—8-32
Configuring a Serial InterfaceConfiguring a Serial Interface
Enter global configuration mode
Router(config)#interface serial 0/0 Router(config-if)#
Router#configure termRouter(config)#
Specify interface
![Page 33: Chapter 1 - Operating Cisco IOS Devices](https://reader034.vdocument.in/reader034/viewer/2022042615/55cf8f43550346703b9a91ea/html5/thumbnails/33.jpg)
© 2005 Cisco Systems, Inc. All rights reserved. INTRO v2.1—8-33
Configuring a Serial InterfaceConfiguring a Serial Interface
Enter Global Configuration Mode
Router(config)#interface serial 0/0 Router(config-if)#
Router#configure termRouter(config)#
Specify Interface
![Page 34: Chapter 1 - Operating Cisco IOS Devices](https://reader034.vdocument.in/reader034/viewer/2022042615/55cf8f43550346703b9a91ea/html5/thumbnails/34.jpg)
© 2005 Cisco Systems, Inc. All rights reserved. INTRO v2.1—8-34
Router#show interface serial 0/0Serial0 is up, line protocol is up Hardware is HD64570 Internet address is 10.140.4.2/24 MTU 1500 bytes, BW 64 Kbit, DLY 20000 usec, rely 255/255, load 1/255 Encapsulation HDLC, loopback not set, keepalive set (10 sec) Last input 00:00:09, output 00:00:04, output hang never Last clearing of "show interface" counters never Input queue: 0/75/0 (size/max/drops); Total output drops: 0 Queueing strategy: weighted fair Output queue: 0/1000/64/0 (size/max total/threshold/drops) Conversations 0/1/256 (active/max active/max total) Reserved Conversations 0/0 (allocated/max allocated) 5 minute input rate 0 bits/sec, 0 packets/sec 5 minute output rate 0 bits/sec, 0 packets/sec(output omitted)
Verifying Your ChangesVerifying Your Changes
BW 64 Kbit,address is 10.140.4.2/24
![Page 35: Chapter 1 - Operating Cisco IOS Devices](https://reader034.vdocument.in/reader034/viewer/2022042615/55cf8f43550346703b9a91ea/html5/thumbnails/35.jpg)
© 2005 Cisco Systems, Inc. All rights reserved. INTRO v2.1—8-35
Router#show interfaces serial 0/0
Serial1 is up, line protocol is up
Hardware is HD64570 Description: 64Kb Line to San Jose :: :: :: :: :: :: :: :: ::
Operational............................Connection/Layer 2 encap…Interface problem..................Disabled ................................
Serial0/0 is up, line protocol is upSerial0/0 is up, line protocol is downSerial0/0 is down, line protocol is downSerial0/0 is administratively down, line protocol is down
KeepalivesCarrier Detect
Interpreting Interface Status
![Page 36: Chapter 1 - Operating Cisco IOS Devices](https://reader034.vdocument.in/reader034/viewer/2022042615/55cf8f43550346703b9a91ea/html5/thumbnails/36.jpg)
© 2005 Cisco Systems, Inc. All rights reserved. INTRO v2.1—8-36
Disabling or Enabling an Interface
Router#configure termRouter(config)#interface serial 0/0 Router(config-if)#no shutdown%LINK-3-UPDOWN: Interface Seria0/0, changed state to up%LINEPROTO-5-UPDOWN: Line Protocol on Interface Serial0/0, changed state to up
•Enables an interface that is administratively shut down
Router#configure termRouter(config)#interface serial 0/0 Router(config-if)#shutdown%LINK-5-CHANGED: Interface Serial0/0, changed state to administratively down %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0/0, changed state to down
• Administratively turns off an interface
![Page 37: Chapter 1 - Operating Cisco IOS Devices](https://reader034.vdocument.in/reader034/viewer/2022042615/55cf8f43550346703b9a91ea/html5/thumbnails/37.jpg)
© 2005 Cisco Systems, Inc. All rights reserved. INTRO v2.1—8-37
Serial Interface show controller Command
Router#show controller serial 0/0HD unit 0, idb = 0x121C04, driver structure at 0x127078buffer size 1524 HD unit 0, V.35 DTE cable
.
.
.
Router#show controller serial 0/0HD unit 0, idb = 0x121C04, driver structure at 0x127078buffer size 1524 HD unit 0, V.35 DTE cable
.
.
.
• Shows the cable type of serial cables
![Page 38: Chapter 1 - Operating Cisco IOS Devices](https://reader034.vdocument.in/reader034/viewer/2022042615/55cf8f43550346703b9a91ea/html5/thumbnails/38.jpg)
© 2005 Cisco Systems, Inc. All rights reserved. INTRO v2.1—8-38
Useful Commands
Router(config)#line console 0Router(config-line)#exec-timeout 0 0
Router(config)#line console 0Router(config-line)#logging synchronous
Preventing console session timeout
Redisplays interrupted console input
Router(config)#no ip domain-lookup
Disable DNS-based host name-to-address translation on your switch.This feature is enabled by default, typos will cause the cisco device to broadcast the typo out to a DNS server on 255.255.255.255
Preventing DNS resolution due to typos
![Page 39: Chapter 1 - Operating Cisco IOS Devices](https://reader034.vdocument.in/reader034/viewer/2022042615/55cf8f43550346703b9a91ea/html5/thumbnails/39.jpg)
© 2005 Cisco Systems, Inc. All rights reserved. INTRO v2.1—8-39
• Defines the static host name to IP address mapping
• Hosts/interfaces are selectable by name or IP address
Router IP Host NamesRouter IP Host Names
Router(config)#ip host name [tcp-port-number]address [address]Router(config)#ip host name [tcp-port-number]address [address]
ip host R1 172.16.3.1ip host S1 172.16.4.3ip host R1 172.16.3.1ip host S1 172.16.4.3
![Page 40: Chapter 1 - Operating Cisco IOS Devices](https://reader034.vdocument.in/reader034/viewer/2022042615/55cf8f43550346703b9a91ea/html5/thumbnails/40.jpg)
© 2005 Cisco Systems, Inc. All rights reserved. INTRO v2.1—8-40
Cisco Discovery Protocol
• CDP is a proprietary utility that provides a summary of directly connected switches, routers, and other Cisco devices.
• CDP discovers neighboring devices regardless of which protocol suite they are running.
• Physical media must support the SNAP encapsulation, Because CDP runs over the data-link layer only, two systems that support different network-layer protocols can learn about each other.
• Each CDP-configured device sends periodic messages to a multicast address of 01:00:0c:cc:cc:cc
• CDP v2 is the default version on Cat 2950 switches
![Page 41: Chapter 1 - Operating Cisco IOS Devices](https://reader034.vdocument.in/reader034/viewer/2022042615/55cf8f43550346703b9a91ea/html5/thumbnails/41.jpg)
© 2005 Cisco Systems, Inc. All rights reserved. INTRO v2.1—8-41
Discovering Neighbors with CDP
• CDP runs on routers with Cisco IOS software Release 10.3 or later and on Cisco switches and hubs.
• Summary information includes:
– Device identifiers
– Address list
– Port identifier
– Capabilities list
– Platform
![Page 42: Chapter 1 - Operating Cisco IOS Devices](https://reader034.vdocument.in/reader034/viewer/2022042615/55cf8f43550346703b9a91ea/html5/thumbnails/42.jpg)
© 2005 Cisco Systems, Inc. All rights reserved. INTRO v2.1—8-42
Using CDP
![Page 43: Chapter 1 - Operating Cisco IOS Devices](https://reader034.vdocument.in/reader034/viewer/2022042615/55cf8f43550346703b9a91ea/html5/thumbnails/43.jpg)
© 2005 Cisco Systems, Inc. All rights reserved. INTRO v2.1—8-43
Using the show cdp neighbors Command
![Page 44: Chapter 1 - Operating Cisco IOS Devices](https://reader034.vdocument.in/reader034/viewer/2022042615/55cf8f43550346703b9a91ea/html5/thumbnails/44.jpg)
© 2005 Cisco Systems, Inc. All rights reserved. INTRO v2.1—8-44
Using the show cdp entry Command
![Page 45: Chapter 1 - Operating Cisco IOS Devices](https://reader034.vdocument.in/reader034/viewer/2022042615/55cf8f43550346703b9a91ea/html5/thumbnails/45.jpg)
© 2005 Cisco Systems, Inc. All rights reserved. INTRO v2.1—8-45
Additional CDP Commands
![Page 46: Chapter 1 - Operating Cisco IOS Devices](https://reader034.vdocument.in/reader034/viewer/2022042615/55cf8f43550346703b9a91ea/html5/thumbnails/46.jpg)
© 2005 Cisco Systems, Inc. All rights reserved. INTRO v2.1—8-46
Using Telnet to Connect to Remote Devices
![Page 47: Chapter 1 - Operating Cisco IOS Devices](https://reader034.vdocument.in/reader034/viewer/2022042615/55cf8f43550346703b9a91ea/html5/thumbnails/47.jpg)
© 2005 Cisco Systems, Inc. All rights reserved. INTRO v2.1—8-47
Viewing Telnet Connections
Who I am connected to
Who is connected to you
![Page 48: Chapter 1 - Operating Cisco IOS Devices](https://reader034.vdocument.in/reader034/viewer/2022042615/55cf8f43550346703b9a91ea/html5/thumbnails/48.jpg)
© 2005 Cisco Systems, Inc. All rights reserved. INTRO v2.1—8-48
Suspending and Resuming a Telnet Session
![Page 49: Chapter 1 - Operating Cisco IOS Devices](https://reader034.vdocument.in/reader034/viewer/2022042615/55cf8f43550346703b9a91ea/html5/thumbnails/49.jpg)
© 2005 Cisco Systems, Inc. All rights reserved. INTRO v2.1—8-49
Closing a Telnet Session
![Page 50: Chapter 1 - Operating Cisco IOS Devices](https://reader034.vdocument.in/reader034/viewer/2022042615/55cf8f43550346703b9a91ea/html5/thumbnails/50.jpg)
© 2005 Cisco Systems, Inc. All rights reserved. INTRO v2.1—8-50
Using the ping and trace Commands
Tests the connectivity and path to a remote device
![Page 51: Chapter 1 - Operating Cisco IOS Devices](https://reader034.vdocument.in/reader034/viewer/2022042615/55cf8f43550346703b9a91ea/html5/thumbnails/51.jpg)
© 2005 Cisco Systems, Inc. All rights reserved. INTRO v2.1—8-51
Debug Commands
Router# debug ip eigrpIP-EIGRP: Processing incoming UPDATE packetIP-EIGRP: Ext 192.168.3.0 255.255.255.0 M 386560 - 256000 130560 SM 360960 - 256000 104960IP-EIGRP: Ext 192.168.0.0 255.255.255.0 M 386560 - 256000 130560 SM 360960 - 256000 104960IP-EIGRP: Ext 192.168.3.0 255.255.255.0 M 386560 - 256000 130560 SM 360960 - 256000 104960IP-EIGRP: 172.69.43.0 255.255.255.0, - do advertise out Ethernet0/1IP-EIGRP: Ext 172.69.43.0 255.255.255.0 metric 371200 - 256000 115200IP-EIGRP: 192.135.246.0 255.255.255.0, - do advertise out Ethernet0/1IP-EIGRP: Ext 192.135.246.0 255.255.255.0 metric 46310656 - 45714176 596480IP-EIGRP: 172.69.40.0 255.255.255.0, - do advertise out Ethernet0/1IP-EIGRP: Ext 172.69.40.0 255.255.255.0 metric 2272256 - 1657856 614400IP-EIGRP: 192.135.245.0 255.255.255.0, - do advertise out Ethernet0/1IP-EIGRP: Ext 192.135.245.0 255.255.255.0 metric 40622080 - 40000000 622080IP-EIGRP: 192.135.244.0 255.255.255.0, - do advertise out Ethernet0/1
![Page 52: Chapter 1 - Operating Cisco IOS Devices](https://reader034.vdocument.in/reader034/viewer/2022042615/55cf8f43550346703b9a91ea/html5/thumbnails/52.jpg)
© 2005 Cisco Systems, Inc. All rights reserved. INTRO v2.1—8-52
Show Commands
R1#show ip route eigrpD 172.17.0.0/16 [90/40514560] via 192.168.1.102, 00:07:01, Serial0/0/1 172.16.0.0/16 is variably subnetted, 2 subnets, 2 masksD 172.16.0.0/16 is a summary, 00:05:13, Null0 192.168.1.0/24 is variably subnetted, 2 subnets, 2 masksD 192.168.1.0/24 is a summary, 00:05:13, Null0
R1#show ip route <output omitted>Gateway of last resort is not setD 172.17.0.0/16 [90/40514560] via 192.168.1.102, 00:06:55, Serial0/0/1 172.16.0.0/16 is variably subnetted, 2 subnets, 2 masksD 172.16.0.0/16 is a summary, 00:05:07, Null0C 172.16.1.0/24 is directly connected, FastEthernet0/0 192.168.1.0/24 is variably subnetted, 2 subnets, 2 masksC 192.168.1.96/27 is directly connected, Serial0/0/1D 192.168.1.0/24 is a summary, 00:05:07, Null0
![Page 53: Chapter 1 - Operating Cisco IOS Devices](https://reader034.vdocument.in/reader034/viewer/2022042615/55cf8f43550346703b9a91ea/html5/thumbnails/53.jpg)
© 2005 Cisco Systems, Inc. All rights reserved. INTRO v2.1—8-53
• System startup routines initiate router software.
• Router falls back to startup alternatives if needed.
Check hardware
Find and load Cisco IOSsoftware image
Find and apply routerconfiguration information
Load Bootstrap
1. Before you start the router, verify the power, cabling, and console connection.
2. Push the power switch to “on.”
3. Observe the boot sequence:
– Cisco IOS software output text appears on the console.
Initial Startup of the Cisco Router
![Page 54: Chapter 1 - Operating Cisco IOS Devices](https://reader034.vdocument.in/reader034/viewer/2022042615/55cf8f43550346703b9a91ea/html5/thumbnails/54.jpg)
© 2005 Cisco Systems, Inc. All rights reserved. INTRO v2.1—8-54
Router Power On/Bootup Sequence
• Perform power-on self test (POST).
• Load and run bootstrap code.
• Find the Cisco IOS software.
• Load the Cisco IOS software.
• Find the configuration.
• Load the configuration.
• Run the configured Cisco IOS software.
![Page 55: Chapter 1 - Operating Cisco IOS Devices](https://reader034.vdocument.in/reader034/viewer/2022042615/55cf8f43550346703b9a91ea/html5/thumbnails/55.jpg)
© 2005 Cisco Systems, Inc. All rights reserved. INTRO v2.1—8-55
Router Internal Components
RAM (DRAM)Working
Memory and running
configuration
Configuration Register
ROMBasic Cisco IOS
Software
FlashCisco IOS software
EEPROM or PCMCIA
NVRAMStartup Configuration
Interfaces
![Page 56: Chapter 1 - Operating Cisco IOS Devices](https://reader034.vdocument.in/reader034/viewer/2022042615/55cf8f43550346703b9a91ea/html5/thumbnails/56.jpg)
© 2005 Cisco Systems, Inc. All rights reserved. INTRO v2.1—8-56
ROM Functions
ROM
• Contains microcode for basic functions
Bootstrap
Mini IOSsoftware
file
ROMMonitor
POST
show version
Console
![Page 57: Chapter 1 - Operating Cisco IOS Devices](https://reader034.vdocument.in/reader034/viewer/2022042615/55cf8f43550346703b9a91ea/html5/thumbnails/57.jpg)
© 2005 Cisco Systems, Inc. All rights reserved. INTRO v2.1—8-57
Finding the Cisco IOS
Flash
showversion
show startup-config
CiscoIOS
Software
Order of search:1. Checks configuration register 2. Parses config in NVRAM3. Defaults to first file in Flash4. Attempts to boot from network server5. RXBOOT6. ROMMON
Console
Configuration Register
NVRAM
![Page 58: Chapter 1 - Operating Cisco IOS Devices](https://reader034.vdocument.in/reader034/viewer/2022042615/55cf8f43550346703b9a91ea/html5/thumbnails/58.jpg)
© 2005 Cisco Systems, Inc. All rights reserved. INTRO v2.1—8-58
wg_ro_a# s how versionCisco Internetwork Operating System Software IOS (tm) 2500 Software (C2500-JS-L), Version 12.0(3), RELEASE SOFTWARE (fc1)Copyright (c) 1986-1999 by cisco Systems, Inc.Compiled Mon 08-Feb-99 18:18 by phanguyeImage text-base: 0x03050C84, data-base: 0x00001000
ROM: System Bootstrap, Version 11.0(10c), SOFTWAREBOOTFLASH: 3000 Bootstrap Software (IGS-BOOT-R), Version 11.0(10c), (fc1)
wg_ro_a uptime is 20 minutesSystem restarted by reloadSystem image file is "flash:c2500-js-l_120-3.bin"
--More--
Configuration register is 0x2102
Determining the Current Configuration Register Value
• Configuration register value in show version
![Page 59: Chapter 1 - Operating Cisco IOS Devices](https://reader034.vdocument.in/reader034/viewer/2022042615/55cf8f43550346703b9a91ea/html5/thumbnails/59.jpg)
© 2005 Cisco Systems, Inc. All rights reserved. INTRO v2.1—8-59
Router#configure terminalRouter(config)#config-register 0x2102[Ctrl-Z]Router#reload
• Configuration register bits 3, 2, 1, and 0 set boot option.
• Check configuration register value with show version
Configuration Register ValuesConfiguration Register Values
Configuration Register Boot Field Value
0x0
0x2 to 0xF
0x1
Meaning
Use ROM monitor mode (manually boot using the b command).
Examine NVRAM for boot system commands (0x2 default if router has Flash).
Automatically boot from ROM(provides Cisco IOS software subset).
![Page 60: Chapter 1 - Operating Cisco IOS Devices](https://reader034.vdocument.in/reader034/viewer/2022042615/55cf8f43550346703b9a91ea/html5/thumbnails/60.jpg)
© 2005 Cisco Systems, Inc. All rights reserved. INTRO v2.1—8-60
Router Startup Flowchart
Use IOS fromFlash
Attempt to Get
IOS from Network
Use IOS in ROM(rxboot Mode)
Check StartupConfig
Boot Field = 0
0x0
Boot Field = 1
0x1
Boot System
Commands?
Config regbit 13 = 1
?
5 Failures?
Valid IOS inFlash
?
Do WhatThey Say
RunROM
Monitor
START
Yes
Yes
No
No
Yes
No
No
Yes
Yes
No
NoYes Success
?
No
Yes
Use File fromNetwork
Load IOSValid Config
?
Config RegBit 6 = 1
?
Yes
No Yes
SETUPDIALOG
NORMAL STARTUP
COMPLETE
No
![Page 61: Chapter 1 - Operating Cisco IOS Devices](https://reader034.vdocument.in/reader034/viewer/2022042615/55cf8f43550346703b9a91ea/html5/thumbnails/61.jpg)
© 2005 Cisco Systems, Inc. All rights reserved. INTRO v2.1—8-61
Loading the Configuration
Console
CiscoIOS
Setup Utility
showstartup-config
showrunning-config
• Load and execute the configuration from NVRAM.
• If no configuration is present in NVRAM, enter setup mode.
ConfigConfig
RAM NVRAM
![Page 62: Chapter 1 - Operating Cisco IOS Devices](https://reader034.vdocument.in/reader034/viewer/2022042615/55cf8f43550346703b9a91ea/html5/thumbnails/62.jpg)
© 2005 Cisco Systems, Inc. All rights reserved. INTRO v2.1—8-62
show running and show startup Commands
wg_ro_c#show startup-configUsing 1359 out of 32762 bytes!version 12.0!
-- More --
wg_ro_c#show running-configBuilding configuration...
Current configuration:!version 12.0!
-- More --
In NVRAMIn RAM
• Displays current and saved configuration
![Page 63: Chapter 1 - Operating Cisco IOS Devices](https://reader034.vdocument.in/reader034/viewer/2022042615/55cf8f43550346703b9a91ea/html5/thumbnails/63.jpg)
© 2005 Cisco Systems, Inc. All rights reserved. INTRO v2.1—8-63
Loading the Cisco IOS from Flash
Flash
CiscoIOS
CiscoIOS show flash
• Flash file is decompressed into RAM.
Console
RAM
![Page 64: Chapter 1 - Operating Cisco IOS Devices](https://reader034.vdocument.in/reader034/viewer/2022042615/55cf8f43550346703b9a91ea/html5/thumbnails/64.jpg)
© 2005 Cisco Systems, Inc. All rights reserved. INTRO v2.1—8-64
show flash Command
wg_ro_a# sh flash
System flash directory:File Length Name/status 1 10084696 c2500-js-l_120-3.bin [10084760 bytes used, 6692456 available, 16777216 total]16384K bytes of processor board System flash (Read ONLY)
wg_ro_a# sh flash
System flash directory:File Length Name/status 1 10084696 c2500-js-l_120-3.bin [10084760 bytes used, 6692456 available, 16777216 total]16384K bytes of processor board System flash (Read ONLY)
![Page 65: Chapter 1 - Operating Cisco IOS Devices](https://reader034.vdocument.in/reader034/viewer/2022042615/55cf8f43550346703b9a91ea/html5/thumbnails/65.jpg)
© 2005 Cisco Systems, Inc. All rights reserved. INTRO v2.1—8-65
wg_ro_a# show flash
System flash directory:File Length Name/status 1 10084696 c2500-js-l_120-3.bin
[10084760 bytes used, 6692456 available, 16777216 total]16384K bytes of processor board System flash (Read ONLY)
Verifying Memory and Deciphering Image FilenamesVerifying Memory and Deciphering Image Filenames
![Page 66: Chapter 1 - Operating Cisco IOS Devices](https://reader034.vdocument.in/reader034/viewer/2022042615/55cf8f43550346703b9a91ea/html5/thumbnails/66.jpg)
© 2005 Cisco Systems, Inc. All rights reserved. INTRO v2.1—8-66
Components of the Show version command
![Page 67: Chapter 1 - Operating Cisco IOS Devices](https://reader034.vdocument.in/reader034/viewer/2022042615/55cf8f43550346703b9a91ea/html5/thumbnails/67.jpg)
© 2005 Cisco Systems, Inc. All rights reserved. INTRO v2.1—8-67
Sources of ConfigurationsSources of Configurations
ConfigConfig
RAM NVRAM
• NVRAM
copy running startup
copy startup running (merge)
![Page 68: Chapter 1 - Operating Cisco IOS Devices](https://reader034.vdocument.in/reader034/viewer/2022042615/55cf8f43550346703b9a91ea/html5/thumbnails/68.jpg)
© 2005 Cisco Systems, Inc. All rights reserved. INTRO v2.1—8-68
Sources of ConfigurationsSources of Configurations
ConfigConfig
RAM NVRAM
• NVRAM
• Terminal
copy running startup
copy startup running (merge)
config term
(merge)
![Page 69: Chapter 1 - Operating Cisco IOS Devices](https://reader034.vdocument.in/reader034/viewer/2022042615/55cf8f43550346703b9a91ea/html5/thumbnails/69.jpg)
© 2005 Cisco Systems, Inc. All rights reserved. INTRO v2.1—8-69
Sources of ConfigurationsSources of Configurations
ConfigConfig
Console
RAM NVRAM
• NVRAM
• Terminal
• TFTP server
copy running startup
copy startup running (merge)
TFTPserver
copy start tftp
copy tftp start
copy run tftp
copy tftp run
(merge)
config term
(merge)
copy {tftp / running-config / startup-config} {tftp / running-config / startup-config
![Page 70: Chapter 1 - Operating Cisco IOS Devices](https://reader034.vdocument.in/reader034/viewer/2022042615/55cf8f43550346703b9a91ea/html5/thumbnails/70.jpg)
© 2005 Cisco Systems, Inc. All rights reserved. INTRO v2.1—8-70
Sources of Configurations
ConfigurationConfiguration
Console
RAM NVRAM
• NVRAM
• Terminal
• TFTP server
• Erase start
copy running startup
copy startup running (merge)
TFTPServer
Blank000000000000
erasestart
config term
(merge)
copy tftp run
(merge) copy tftp start
copy start tftpcopy run tftp
![Page 71: Chapter 1 - Operating Cisco IOS Devices](https://reader034.vdocument.in/reader034/viewer/2022042615/55cf8f43550346703b9a91ea/html5/thumbnails/71.jpg)
© 2005 Cisco Systems, Inc. All rights reserved. INTRO v2.1—8-71
copy run tftp and copy tftp run Commands
wg_ro_a# copy running-config tftp Address or name of remote host []? 10.1.1.1 Destination filename [running-config]? wgroa.cfg .!!1684 bytes copied in 13.300 secs (129 bytes/sec) wg_ro_a# copy tftp running-config Address or name of remote host []? 10.1.1.1 Source filename []? wgroa.cfg Destination filename [running-config]? Accessing tftp://10.1.1.1/wgroa.cfg... Loading wgroa.cfg from 10.1.1.1 (via Ethernet0): ![OK - 1684/3072 bytes]
1684 bytes copied in 17.692 secs (99 bytes/sec)
![Page 72: Chapter 1 - Operating Cisco IOS Devices](https://reader034.vdocument.in/reader034/viewer/2022042615/55cf8f43550346703b9a91ea/html5/thumbnails/72.jpg)
© 2005 Cisco Systems, Inc. All rights reserved. INTRO v2.1—8-72
Boot System Commands
Boot System Commands
Result
No Boot command Tries loading the following (in order): first file in flash in flash; broadcast looking for TFTP server and a default filename; IOS in ROM; or uses ROM Monitor
Boot system ROM IOS from ROM is loaded
Boot system flash The first file from flash memory
Boot system flash filename IOS with the name filename is loaded from flash memory
Boot system tftp filename 10.1.1.1
IOS with the name filename is loaded from the TFTP server.
Multiple boot system commands, any variety
An attempt occurs to load IOS based on the first boot command in the configuration. If that fails, the second boot command is used, and so on, until one is successful
![Page 73: Chapter 1 - Operating Cisco IOS Devices](https://reader034.vdocument.in/reader034/viewer/2022042615/55cf8f43550346703b9a91ea/html5/thumbnails/73.jpg)
© 2005 Cisco Systems, Inc. All rights reserved. INTRO v2.1—8-73
Unconfigured Versus Configured Router
--- System Configuration Dialog ---
Continue with configuration dialog? [yes/no]:yes At any point you may enter a question mark '?' for help.Use ctrl-c to abort configuration dialog at any prompt.Default settings are in square brackets '[ ]'.
Setup ModeSetup Mode
wg_ro_c con0 is now available
Press RETURN to get started.
User-Mode Prompt
User-Mode Prompt
wg_ro_c>
Bootup Output from the Router
Console
![Page 74: Chapter 1 - Operating Cisco IOS Devices](https://reader034.vdocument.in/reader034/viewer/2022042615/55cf8f43550346703b9a91ea/html5/thumbnails/74.jpg)
© 2005 Cisco Systems, Inc. All rights reserved. INTRO v2.1—8-74
Setup: The Initial Configuration Dialog
Router#setup
--- System Configuration Dialog ---
Continue with configuration dialog? [yes/no]: y
At any point you may enter a question mark '?' for help.Use ctrl-c to abort configuration dialog at any prompt.Default settings are in square brackets '[]'.
Basic management setup configures only enough connectivityfor management of the system, extended setup will ask youto configure each interface on the system
Would you like to enter basic management setup? [yes/no]: n
![Page 75: Chapter 1 - Operating Cisco IOS Devices](https://reader034.vdocument.in/reader034/viewer/2022042615/55cf8f43550346703b9a91ea/html5/thumbnails/75.jpg)
© 2005 Cisco Systems, Inc. All rights reserved. INTRO v2.1—8-75
Setup Global Parameters
Initial Global Parameters
Configuring global parameters:
Enter host name [Router]:wg_ro_c
The enable secret is a password used to protect access to privileged EXEC and configuration modes. This password, after entered, becomes encrypted in the configuration. Enter enable secret: cisco
The enable password is used when you do not specify an enable secret password, with some older software versions, and some boot images. Enter enable password: sanfran
The virtual terminal password is used to protect access to the router over a network interface. Enter virtual terminal password: sanjose Configure SNMP Network Management? [no]:
Configuring global parameters:
Enter host name [Router]:wg_ro_c
The enable secret is a password used to protect access to privileged EXEC and configuration modes. This password, after entered, becomes encrypted in the configuration. Enter enable secret: cisco
The enable password is used when you do not specify an enable secret password, with some older software versions, and some boot images. Enter enable password: sanfran
The virtual terminal password is used to protect access to the router over a network interface. Enter virtual terminal password: sanjose Configure SNMP Network Management? [no]:
![Page 76: Chapter 1 - Operating Cisco IOS Devices](https://reader034.vdocument.in/reader034/viewer/2022042615/55cf8f43550346703b9a91ea/html5/thumbnails/76.jpg)
© 2005 Cisco Systems, Inc. All rights reserved. INTRO v2.1—8-76
Setup Interface Parameters
BRI interface needs isdn switch-type to be configured Valid switch types are : [0] none..........Only if you don't want to configure BRI. [1] basic-1tr6....1TR6 switch type for Germany [2] basic-5ess....AT&T 5ESS switch type for the US/Canada [3] basic-dms100..Northern DMS-100 switch type for US/Canada [4] basic-net3....NET3 switch type for UK and Europe [5] basic-ni......National ISDN switch type [6] basic-ts013...TS013 switch type for Australia [7] ntt...........NTT switch type for Japan [8] vn3...........VN3 and VN4 switch types for France Choose ISDN BRI Switch Type [2]:
Configuring interface parameters:
Do you want to configure BRI0 (BRI d-channel) interface? [no]:
Do you want to configure Ethernet0 interface? [no]: y Configure IP on this interface? [no]: y IP address for this interface: 10.1.1.33 Subnet mask for this interface [255.0.0.0] : 255.255.255.0 Class A network is 10.0.0.0, 24 subnet bits; mask is /24
Do you want to configure Serial0 interface? [no]:
BRI interface needs isdn switch-type to be configured Valid switch types are : [0] none..........Only if you don't want to configure BRI. [1] basic-1tr6....1TR6 switch type for Germany [2] basic-5ess....AT&T 5ESS switch type for the US/Canada [3] basic-dms100..Northern DMS-100 switch type for US/Canada [4] basic-net3....NET3 switch type for UK and Europe [5] basic-ni......National ISDN switch type [6] basic-ts013...TS013 switch type for Australia [7] ntt...........NTT switch type for Japan [8] vn3...........VN3 and VN4 switch types for France Choose ISDN BRI Switch Type [2]:
Configuring interface parameters:
Do you want to configure BRI0 (BRI d-channel) interface? [no]:
Do you want to configure Ethernet0 interface? [no]: y Configure IP on this interface? [no]: y IP address for this interface: 10.1.1.33 Subnet mask for this interface [255.0.0.0] : 255.255.255.0 Class A network is 10.0.0.0, 24 subnet bits; mask is /24
Do you want to configure Serial0 interface? [no]:
![Page 77: Chapter 1 - Operating Cisco IOS Devices](https://reader034.vdocument.in/reader034/viewer/2022042615/55cf8f43550346703b9a91ea/html5/thumbnails/77.jpg)
© 2005 Cisco Systems, Inc. All rights reserved. INTRO v2.1—8-77
Setup Script Review and Use
The following configuration command script was created:
hostname Routerenable secret 5 $1$/CCk$4r7zDwDNeqkxFO.kJxC3G0enable password sanfranline vty 0 4password sanjoseno snmp-server!no appletalk routingno decnet routingip routingno clns routingno ipx routingno vines routingno xns routingno apollo routingisdn switch-type basic-5ess
interface BRI0shutdownno ip address!interface Ethernet0no shutdownip address 10.1.1.31 255.255.255.0no mop enabled!interface Serial0shutdownno ip address<text omitted>end
[0] Go to the IOS command prompt without saving this config.[1] Return back to the setup without saving this config.[2] Save this configuration to nvram and exit.
Enter your selection [2]:
![Page 78: Chapter 1 - Operating Cisco IOS Devices](https://reader034.vdocument.in/reader034/viewer/2022042615/55cf8f43550346703b9a91ea/html5/thumbnails/78.jpg)
© 2005 Cisco Systems, Inc. All rights reserved. INTRO v2.1—8-78
wg_ro_a# copy flash tftpSource filename []? c2500-js-l_120-3.binAddress or name of remote host []? 10.1.1.1Destination filename [c2500-js-l_120-3.bin]? !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!<output omitted>10084696 bytes copied in 709.228 secs (14223 bytes/sec)wg_ro_a#
Creating a Software Image BackupCreating a Software Image Backup
• Back up current files prior to updating Flash.
NetworkServer
FLASHFLASH
copy flash tftp
![Page 79: Chapter 1 - Operating Cisco IOS Devices](https://reader034.vdocument.in/reader034/viewer/2022042615/55cf8f43550346703b9a91ea/html5/thumbnails/79.jpg)
© 2005 Cisco Systems, Inc. All rights reserved. INTRO v2.1—8-79
Upgrading the Image from the NetworkUpgrading the Image from the Network
• Erase Flash occurs before loading new image.• Note the message that the image already exists.
NetworkServer
FLASHFLASH
wg_ro_a# copy tftp flashAddress or name of remote host [10.1.1.1]? Source filename []? c2500-js-l_120-3.binDestination filename [c2500-js-l_120-3.bin]? Accessing tftp://10.1.1.1/c2500-js-l_120-3.bin...Erase flash: before copying? [confirm]Erasing the flash filesystem will remove all files! Continue? [confirm]Erasing device... eeeee (output omitted) ...erasedErase of flash: completeLoading c2500-js-l_120-3.bin from 10.1.1.1 (via Ethernet0): !!!!!!!!!!!!!!!!!!!!(output omitted)[OK - 10084696/20168704 bytes]Verifying checksum... OK (0x9AA0)10084696 bytes copied in 309.108 secs (32636 bytes/sec)wg_ro_a#
![Page 80: Chapter 1 - Operating Cisco IOS Devices](https://reader034.vdocument.in/reader034/viewer/2022042615/55cf8f43550346703b9a91ea/html5/thumbnails/80.jpg)
© 2005 Cisco Systems, Inc. All rights reserved. INTRO v2.1—8-80
• System startup routines initiate switch software.
• Initial startup uses default configuration parameters.
Initial Startup of the Catalyst Switch
![Page 81: Chapter 1 - Operating Cisco IOS Devices](https://reader034.vdocument.in/reader034/viewer/2022042615/55cf8f43550346703b9a91ea/html5/thumbnails/81.jpg)
© 2005 Cisco Systems, Inc. All rights reserved. INTRO v2.1—8-81
Catalyst 2950 Switch LED Indicators
![Page 82: Chapter 1 - Operating Cisco IOS Devices](https://reader034.vdocument.in/reader034/viewer/2022042615/55cf8f43550346703b9a91ea/html5/thumbnails/82.jpg)
© 2005 Cisco Systems, Inc. All rights reserved. INTRO v2.1—8-82
2950 Switch LEDs
LED Use and Meaning
System OFF: Powered off / GREEN: Up and Working / AMBER: POST failure
RPS This signals the existence of RPS, the status of RPS, and the status of main power
Port LEDs Each port has a single LED, whose meaning is interpreted based on which of the four MODE LEDs is lit
MODE When pressed, this button changes from one of the four states: Stat, util, duplex and speed. The current mode is shown by the green LED.
Stat Green mean port is functioning, off means port is not functioning, flashing means activity on port
Util Uses port LEDs to give an indication of switch utilization, the more ports that are lit the more the switch is being utilised
Duplex The port LEDs show solid green if full duplex, and off if half duplex
Speed For 10/100 ports, the LEDs shows solid green if running 100Mbps, and off if running 10Mbps
![Page 83: Chapter 1 - Operating Cisco IOS Devices](https://reader034.vdocument.in/reader034/viewer/2022042615/55cf8f43550346703b9a91ea/html5/thumbnails/83.jpg)
© 2005 Cisco Systems, Inc. All rights reserved. INTRO v2.1—8-83
Initial Bootup Output from the Catalyst 2950 Switch
![Page 84: Chapter 1 - Operating Cisco IOS Devices](https://reader034.vdocument.in/reader034/viewer/2022042615/55cf8f43550346703b9a91ea/html5/thumbnails/84.jpg)
© 2005 Cisco Systems, Inc. All rights reserved. INTRO v2.1—8-84
Initial Configuration of the Catalyst 2950 Switch Using Setup
![Page 85: Chapter 1 - Operating Cisco IOS Devices](https://reader034.vdocument.in/reader034/viewer/2022042615/55cf8f43550346703b9a91ea/html5/thumbnails/85.jpg)
© 2005 Cisco Systems, Inc. All rights reserved. INTRO v2.1—8-85
Example:
wg_sw_a(config)#interface vlan 1wg_sw_a(config-if)#ip address 10.5.5.11 255.255.255.0wg_sw_a(config-if)#no shutdown
Note: It is necessary to use the no shutdown command to make the interface operational.
wg_sw_a(config)#interface vlan 1wg_sw_a(config-if)#ip address {ip address} {mask}
Configuring the Switch IP Address
![Page 86: Chapter 1 - Operating Cisco IOS Devices](https://reader034.vdocument.in/reader034/viewer/2022042615/55cf8f43550346703b9a91ea/html5/thumbnails/86.jpg)
© 2005 Cisco Systems, Inc. All rights reserved. INTRO v2.1—8-86
Example:
wg_sw_a(config)#ip default-gateway 172.20.137.1
wg_sw_a(config)#ip default-gateway {ip address}
Configuring the Switch Default Gateway
![Page 87: Chapter 1 - Operating Cisco IOS Devices](https://reader034.vdocument.in/reader034/viewer/2022042615/55cf8f43550346703b9a91ea/html5/thumbnails/87.jpg)
© 2005 Cisco Systems, Inc. All rights reserved. INTRO v2.1—8-87
Switch show version Command
![Page 88: Chapter 1 - Operating Cisco IOS Devices](https://reader034.vdocument.in/reader034/viewer/2022042615/55cf8f43550346703b9a91ea/html5/thumbnails/88.jpg)
© 2005 Cisco Systems, Inc. All rights reserved. INTRO v2.1—8-88
Switch show interfaces Command
![Page 89: Chapter 1 - Operating Cisco IOS Devices](https://reader034.vdocument.in/reader034/viewer/2022042615/55cf8f43550346703b9a91ea/html5/thumbnails/89.jpg)
89
CCNA Routing & Switching
Chapter 1
The End