![Page 1: Chapter 14 Working Drawing. TOPICS Introduction Detail drawing Assembly drawing Assembly section Dimensioning](https://reader033.vdocument.in/reader033/viewer/2022061408/551a40fd55034619378b5ee0/html5/thumbnails/1.jpg)
Chapter 14
Working Drawing
![Page 2: Chapter 14 Working Drawing. TOPICS Introduction Detail drawing Assembly drawing Assembly section Dimensioning](https://reader033.vdocument.in/reader033/viewer/2022061408/551a40fd55034619378b5ee0/html5/thumbnails/2.jpg)
TOPICS
Introduction
Detail drawing
Assembly drawing
Assembly section
Dimensioning
![Page 3: Chapter 14 Working Drawing. TOPICS Introduction Detail drawing Assembly drawing Assembly section Dimensioning](https://reader033.vdocument.in/reader033/viewer/2022061408/551a40fd55034619378b5ee0/html5/thumbnails/3.jpg)
Introduction
![Page 4: Chapter 14 Working Drawing. TOPICS Introduction Detail drawing Assembly drawing Assembly section Dimensioning](https://reader033.vdocument.in/reader033/viewer/2022061408/551a40fd55034619378b5ee0/html5/thumbnails/4.jpg)
DEFINITION
Working drawing is a set of drawing used
during the work of making a product.
Working drawing
Detaildrawing
Assemblydrawing
![Page 5: Chapter 14 Working Drawing. TOPICS Introduction Detail drawing Assembly drawing Assembly section Dimensioning](https://reader033.vdocument.in/reader033/viewer/2022061408/551a40fd55034619378b5ee0/html5/thumbnails/5.jpg)
DEFINITION
Detail drawing is a multiview representation
of a single part with dimensions and notes.
Assembly drawing is a drawing of various
parts of a machine or structure assembled in
their relative working positions.
![Page 6: Chapter 14 Working Drawing. TOPICS Introduction Detail drawing Assembly drawing Assembly section Dimensioning](https://reader033.vdocument.in/reader033/viewer/2022061408/551a40fd55034619378b5ee0/html5/thumbnails/6.jpg)
Detail drawing conveys the information
and instructions for manufacturing the part.
4. functional relationship among various
components.
1. completed shape of the product.
2. overall dimensions.
PURPOSE
Assembly drawing conveys
3. relative position of each part.
![Page 7: Chapter 14 Working Drawing. TOPICS Introduction Detail drawing Assembly drawing Assembly section Dimensioning](https://reader033.vdocument.in/reader033/viewer/2022061408/551a40fd55034619378b5ee0/html5/thumbnails/7.jpg)
Detail Drawing
![Page 8: Chapter 14 Working Drawing. TOPICS Introduction Detail drawing Assembly drawing Assembly section Dimensioning](https://reader033.vdocument.in/reader033/viewer/2022061408/551a40fd55034619378b5ee0/html5/thumbnails/8.jpg)
INFORMATION INDETAIL DRAWING
2.1 Shape description
2.2 Size description
2.3 Specifications
1. General information
2. Part’ s information
Title block
Object’s
views
Notes
![Page 9: Chapter 14 Working Drawing. TOPICS Introduction Detail drawing Assembly drawing Assembly section Dimensioning](https://reader033.vdocument.in/reader033/viewer/2022061408/551a40fd55034619378b5ee0/html5/thumbnails/9.jpg)
GENERAL INFORMATION Name of company
Title of drawing (usually part’s name)
Drawing sheet number
Name of drafter, checker
Relevant dates of action
(drawn, checked, approved etc.)
Revision table
Unit
Scale
Method of projection
![Page 10: Chapter 14 Working Drawing. TOPICS Introduction Detail drawing Assembly drawing Assembly section Dimensioning](https://reader033.vdocument.in/reader033/viewer/2022061408/551a40fd55034619378b5ee0/html5/thumbnails/10.jpg)
PART’ S INFORMATION
Orthographic drawing Pictorial drawing
Dimensions and Tolerances
Specifications
General notes
Type of material used
Surface finish
General tolerances
Part number, name, number required
Shape
Size
Heat treatment
![Page 11: Chapter 14 Working Drawing. TOPICS Introduction Detail drawing Assembly drawing Assembly section Dimensioning](https://reader033.vdocument.in/reader033/viewer/2022061408/551a40fd55034619378b5ee0/html5/thumbnails/11.jpg)
If not the case,
- apply enough spacing between parts.
- draw all parts using the same scale.
- Otherwise, the scale should be clearly note
under each part’s drawing.
Draw one part to one sheet of paper.
RECOMMENDED PRACTICE
Standard parts such as bolt, nut, pin, bearing
do not require detail drawings.
![Page 12: Chapter 14 Working Drawing. TOPICS Introduction Detail drawing Assembly drawing Assembly section Dimensioning](https://reader033.vdocument.in/reader033/viewer/2022061408/551a40fd55034619378b5ee0/html5/thumbnails/12.jpg)
Part No., Part name, material, Number required
Notes
Unit, fillets & rounds sizes etc.
Completed dimension
orthographic drawing
Title block
PLACING AN INFORMATION(This course)
![Page 13: Chapter 14 Working Drawing. TOPICS Introduction Detail drawing Assembly drawing Assembly section Dimensioning](https://reader033.vdocument.in/reader033/viewer/2022061408/551a40fd55034619378b5ee0/html5/thumbnails/13.jpg)
EXAMPLE : Interpreting detail drawing
General note
Revision table
Title block
1. Orthographic views
2. Dimensions & Tolerances
3. Surface finishing
ProjectionGen. tolerance
![Page 14: Chapter 14 Working Drawing. TOPICS Introduction Detail drawing Assembly drawing Assembly section Dimensioning](https://reader033.vdocument.in/reader033/viewer/2022061408/551a40fd55034619378b5ee0/html5/thumbnails/14.jpg)
Assembly Drawing
![Page 15: Chapter 14 Working Drawing. TOPICS Introduction Detail drawing Assembly drawing Assembly section Dimensioning](https://reader033.vdocument.in/reader033/viewer/2022061408/551a40fd55034619378b5ee0/html5/thumbnails/15.jpg)
1. Exploded assembly drawings
3. Detail assembly drawings
TYPES OF ASSEMBLY DRAWING
2. General assembly drawings.
The parts are separately display, but they are aligned
according to their assembly positions and sequences.
All parts are drawn in their working position.
All parts are drawn in their working position with a
completed dimensions.
![Page 16: Chapter 14 Working Drawing. TOPICS Introduction Detail drawing Assembly drawing Assembly section Dimensioning](https://reader033.vdocument.in/reader033/viewer/2022061408/551a40fd55034619378b5ee0/html5/thumbnails/16.jpg)
1. EXPLODED ASSEMBLY
Pictorial representationPictorial representation
Finished product
![Page 17: Chapter 14 Working Drawing. TOPICS Introduction Detail drawing Assembly drawing Assembly section Dimensioning](https://reader033.vdocument.in/reader033/viewer/2022061408/551a40fd55034619378b5ee0/html5/thumbnails/17.jpg)
1. EXPLODED ASSEMBLY
Orthographic representationOrthographic representation
![Page 18: Chapter 14 Working Drawing. TOPICS Introduction Detail drawing Assembly drawing Assembly section Dimensioning](https://reader033.vdocument.in/reader033/viewer/2022061408/551a40fd55034619378b5ee0/html5/thumbnails/18.jpg)
2. GENERAL ASSEMBLY
PictorialPictorial OrthographicOrthographic
![Page 19: Chapter 14 Working Drawing. TOPICS Introduction Detail drawing Assembly drawing Assembly section Dimensioning](https://reader033.vdocument.in/reader033/viewer/2022061408/551a40fd55034619378b5ee0/html5/thumbnails/19.jpg)
Only dimensions relate to
machine’s operation are
given.
Only dimensions relate to
machine’s operation are given
in tabulated form (not shown).
2. GENERAL ASSEMBLY
![Page 20: Chapter 14 Working Drawing. TOPICS Introduction Detail drawing Assembly drawing Assembly section Dimensioning](https://reader033.vdocument.in/reader033/viewer/2022061408/551a40fd55034619378b5ee0/html5/thumbnails/20.jpg)
2. GENERAL ASSEMBLY
![Page 21: Chapter 14 Working Drawing. TOPICS Introduction Detail drawing Assembly drawing Assembly section Dimensioning](https://reader033.vdocument.in/reader033/viewer/2022061408/551a40fd55034619378b5ee0/html5/thumbnails/21.jpg)
3. DETAILED ASSEMBLY(working-drawing assembly)
![Page 22: Chapter 14 Working Drawing. TOPICS Introduction Detail drawing Assembly drawing Assembly section Dimensioning](https://reader033.vdocument.in/reader033/viewer/2022061408/551a40fd55034619378b5ee0/html5/thumbnails/22.jpg)
1. All parts, drawn in their operating position.
2. Part list (or bill of materials, BOM)
3. Leader lines with balloons around part numbers.
1. Item number
2. Descriptive name
3. Material, MATL.
4. Quantity required (per a unit of machine), QTY.
4. Machining and assembly operations and critical
dimensions related to operation of the machine.
REQUIRED INFORMATION INGENERAL ASSEMBLY DRAWING
![Page 23: Chapter 14 Working Drawing. TOPICS Introduction Detail drawing Assembly drawing Assembly section Dimensioning](https://reader033.vdocument.in/reader033/viewer/2022061408/551a40fd55034619378b5ee0/html5/thumbnails/23.jpg)
- Assembled parts
- Reference numbers
General notes
Title block
Part list
PLACING AN INFORMATION(This course)
![Page 24: Chapter 14 Working Drawing. TOPICS Introduction Detail drawing Assembly drawing Assembly section Dimensioning](https://reader033.vdocument.in/reader033/viewer/2022061408/551a40fd55034619378b5ee0/html5/thumbnails/24.jpg)
PART LIST (BOM) (This course)
NO. PART NAME REQD. MATL. & NOTE
1 SUPPORT 2 Cast Iron
2 SHAFT 1 Stainless Steel
3 SET SCREW 1Stainless Steel,M3 HEX SOCK CUP PT
Locate above or beside the title block.
Fill the table from the bottom.
![Page 25: Chapter 14 Working Drawing. TOPICS Introduction Detail drawing Assembly drawing Assembly section Dimensioning](https://reader033.vdocument.in/reader033/viewer/2022061408/551a40fd55034619378b5ee0/html5/thumbnails/25.jpg)
EXAMPLE : Another allowable place for BOM
![Page 26: Chapter 14 Working Drawing. TOPICS Introduction Detail drawing Assembly drawing Assembly section Dimensioning](https://reader033.vdocument.in/reader033/viewer/2022061408/551a40fd55034619378b5ee0/html5/thumbnails/26.jpg)
STEPS TO CREATEASSEMBLY DRAWING
4. Draw a view of major parts according to a
selected viewing direction.
3. Choose major parts, i.e. parts that have
several parts assembled on.
1. Analyze geometry and dimensions of all parts
in order to understand the assembly steps and
overall shape of device or machine.
2. Select an appropriate view.
![Page 27: Chapter 14 Working Drawing. TOPICS Introduction Detail drawing Assembly drawing Assembly section Dimensioning](https://reader033.vdocument.in/reader033/viewer/2022061408/551a40fd55034619378b5ee0/html5/thumbnails/27.jpg)
6. Apply section technique where relative
positions between adjacent parts are needed
to clarify.
7. Add balloons, notes and dimensions (if any).
5. Add detail view of the remaining parts at their
working positions.
8. Create BOM.
STEPS TO CREATEASSEMBLY DRAWING
![Page 28: Chapter 14 Working Drawing. TOPICS Introduction Detail drawing Assembly drawing Assembly section Dimensioning](https://reader033.vdocument.in/reader033/viewer/2022061408/551a40fd55034619378b5ee0/html5/thumbnails/28.jpg)
GENERAL PRACTICE
The number of views can be one, two, three
or more as needed, but it should be minimum.
A good viewing direction is that represents all
(or most) of the parts assembled in their working
position.
![Page 29: Chapter 14 Working Drawing. TOPICS Introduction Detail drawing Assembly drawing Assembly section Dimensioning](https://reader033.vdocument.in/reader033/viewer/2022061408/551a40fd55034619378b5ee0/html5/thumbnails/29.jpg)
Part A Part B
EXAMPLE : Selection of a necessary view
Given
Student A Student B
Which is an appropriate view for assembly drawing ?
![Page 30: Chapter 14 Working Drawing. TOPICS Introduction Detail drawing Assembly drawing Assembly section Dimensioning](https://reader033.vdocument.in/reader033/viewer/2022061408/551a40fd55034619378b5ee0/html5/thumbnails/30.jpg)
GENERAL PRACTICE
Hidden lines usually omit unless they are
absolutely necessary to illustrate some
important feature that the reader might
otherwise miss.
![Page 31: Chapter 14 Working Drawing. TOPICS Introduction Detail drawing Assembly drawing Assembly section Dimensioning](https://reader033.vdocument.in/reader033/viewer/2022061408/551a40fd55034619378b5ee0/html5/thumbnails/31.jpg)
EXAMPLE : Hidden lines omit or not ?
Part A
Part B
A
B
C
Good Poor
![Page 32: Chapter 14 Working Drawing. TOPICS Introduction Detail drawing Assembly drawing Assembly section Dimensioning](https://reader033.vdocument.in/reader033/viewer/2022061408/551a40fd55034619378b5ee0/html5/thumbnails/32.jpg)
EXAMPLE : Hidden lines omit or not ?
Part A
Part B
A
B
Good Poor
![Page 33: Chapter 14 Working Drawing. TOPICS Introduction Detail drawing Assembly drawing Assembly section Dimensioning](https://reader033.vdocument.in/reader033/viewer/2022061408/551a40fd55034619378b5ee0/html5/thumbnails/33.jpg)
EXAMPLE : Hidden lines omit or not ?
Part A
Part B
A
B
Good Poor
![Page 34: Chapter 14 Working Drawing. TOPICS Introduction Detail drawing Assembly drawing Assembly section Dimensioning](https://reader033.vdocument.in/reader033/viewer/2022061408/551a40fd55034619378b5ee0/html5/thumbnails/34.jpg)
GENERAL PRACTICESection technique is usually need to clarify
mating of the parts.
Correct
Better
Part A
Part B
OFF
Use different section line styles for adjacent parts.
ONColor
![Page 35: Chapter 14 Working Drawing. TOPICS Introduction Detail drawing Assembly drawing Assembly section Dimensioning](https://reader033.vdocument.in/reader033/viewer/2022061408/551a40fd55034619378b5ee0/html5/thumbnails/35.jpg)
Do not draw section lines on sectional view of
standard parts.
- Threaded fastener
- Washer
- (longitudinal cut of) Solid shaft, Pin, Key
SECTION LINE PRACTICE
![Page 36: Chapter 14 Working Drawing. TOPICS Introduction Detail drawing Assembly drawing Assembly section Dimensioning](https://reader033.vdocument.in/reader033/viewer/2022061408/551a40fd55034619378b5ee0/html5/thumbnails/36.jpg)
EXAMPLE 1 : Assembly steps
3 PIN, Steel, 1 REQD.
2 ARM, Steel, 1 REQD.
1 CLEVIS, Steel, 1 REQD.
![Page 37: Chapter 14 Working Drawing. TOPICS Introduction Detail drawing Assembly drawing Assembly section Dimensioning](https://reader033.vdocument.in/reader033/viewer/2022061408/551a40fd55034619378b5ee0/html5/thumbnails/37.jpg)
EXAMPLE : Section line practice
A
B
Which is an appropriate
full section view of this
assembly ?
Good Poor
OFF ONColor
![Page 38: Chapter 14 Working Drawing. TOPICS Introduction Detail drawing Assembly drawing Assembly section Dimensioning](https://reader033.vdocument.in/reader033/viewer/2022061408/551a40fd55034619378b5ee0/html5/thumbnails/38.jpg)
EXAMPLE 2 : Assembly steps
3 TAPER PIN, Steel, 1 REQD.
2 SHAFT, Steel, 1 REQD.
1 SUPPORT, Steel, 1 REQD.
![Page 39: Chapter 14 Working Drawing. TOPICS Introduction Detail drawing Assembly drawing Assembly section Dimensioning](https://reader033.vdocument.in/reader033/viewer/2022061408/551a40fd55034619378b5ee0/html5/thumbnails/39.jpg)
EXAMPLE : Section line practice
A B
Good Poor
Which is an appropriatefull section view of thisassembly ?
C D
OFF ONColor
![Page 40: Chapter 14 Working Drawing. TOPICS Introduction Detail drawing Assembly drawing Assembly section Dimensioning](https://reader033.vdocument.in/reader033/viewer/2022061408/551a40fd55034619378b5ee0/html5/thumbnails/40.jpg)
EXAMPLE 3 : Assembly steps
3 PIN, Steel, 1 REQD.
2 ARM, Steel, 1 REQD.
1 CLEVIS, Steel, 1 REQD.
![Page 41: Chapter 14 Working Drawing. TOPICS Introduction Detail drawing Assembly drawing Assembly section Dimensioning](https://reader033.vdocument.in/reader033/viewer/2022061408/551a40fd55034619378b5ee0/html5/thumbnails/41.jpg)
EXAMPLE : Section line practice
A
B
Good Poor
OFF ONColor
Which is an appropriate
section view of the joint ?
C
![Page 42: Chapter 14 Working Drawing. TOPICS Introduction Detail drawing Assembly drawing Assembly section Dimensioning](https://reader033.vdocument.in/reader033/viewer/2022061408/551a40fd55034619378b5ee0/html5/thumbnails/42.jpg)
LEADER LINE PRACTICE
Drawn in the oblique direction.
Drawn from the inside of the part to the balloon
and placed a filled circle at the beginning of a line.
12
![Page 43: Chapter 14 Working Drawing. TOPICS Introduction Detail drawing Assembly drawing Assembly section Dimensioning](https://reader033.vdocument.in/reader033/viewer/2022061408/551a40fd55034619378b5ee0/html5/thumbnails/43.jpg)
Shaft
Housing
Bearing
Coverplate
Capscrew
EXAMPLE
![Page 44: Chapter 14 Working Drawing. TOPICS Introduction Detail drawing Assembly drawing Assembly section Dimensioning](https://reader033.vdocument.in/reader033/viewer/2022061408/551a40fd55034619378b5ee0/html5/thumbnails/44.jpg)
1. Assemble steps.
2. Function of each part in machine.
3. Design concept.
INTERPRETING ASSEMBLY DRAWING
![Page 45: Chapter 14 Working Drawing. TOPICS Introduction Detail drawing Assembly drawing Assembly section Dimensioning](https://reader033.vdocument.in/reader033/viewer/2022061408/551a40fd55034619378b5ee0/html5/thumbnails/45.jpg)
EXAMPLE 1 : Shaft support on a machine housing
Assemble steps
1. Install bearing to the shaft.
2. Install the bearing-shaft unit to
the housing.
3. Install the cover plate.
4. Tighten the screw.
![Page 46: Chapter 14 Working Drawing. TOPICS Introduction Detail drawing Assembly drawing Assembly section Dimensioning](https://reader033.vdocument.in/reader033/viewer/2022061408/551a40fd55034619378b5ee0/html5/thumbnails/46.jpg)
1. Bearing :
Support the rotating shaft.
2. Cover :
- Control an axial movement.
- Prevent the bearing unit from
rotation.
Functions of main parts
EXAMPLE 1 : Shaft support on a machine housing
![Page 47: Chapter 14 Working Drawing. TOPICS Introduction Detail drawing Assembly drawing Assembly section Dimensioning](https://reader033.vdocument.in/reader033/viewer/2022061408/551a40fd55034619378b5ee0/html5/thumbnails/47.jpg)
Avoid direct contact between
rotating shaft and housing as well
as cover plate by using a bearing
and clearance holes.
EXAMPLE 1 : Shaft support on a machine housing
Design concept
![Page 48: Chapter 14 Working Drawing. TOPICS Introduction Detail drawing Assembly drawing Assembly section Dimensioning](https://reader033.vdocument.in/reader033/viewer/2022061408/551a40fd55034619378b5ee0/html5/thumbnails/48.jpg)
1. Wrap a packing to the shaft.
2. Install studs to the casing.
3. Install the gland ring where its
holes align with stud.
4. Place the washer and
tightening the nut.
PackingCasing
Gland
EXAMPLE 2 : Leakage prevention unit
Assemble steps
![Page 49: Chapter 14 Working Drawing. TOPICS Introduction Detail drawing Assembly drawing Assembly section Dimensioning](https://reader033.vdocument.in/reader033/viewer/2022061408/551a40fd55034619378b5ee0/html5/thumbnails/49.jpg)
1. Packing : - Preventing the leakage of a fluid inside the casing.
2. Gland : - Press the packing to make it radial expand and press the shaft surface.
PackingCasing
Gland
EXAMPLE 2 : Leakage prevention unit
Function
![Page 50: Chapter 14 Working Drawing. TOPICS Introduction Detail drawing Assembly drawing Assembly section Dimensioning](https://reader033.vdocument.in/reader033/viewer/2022061408/551a40fd55034619378b5ee0/html5/thumbnails/50.jpg)
Avoid direct contact between
rotating shaft and casing as well
as gland ring’s hole.
PackingCasing
Gland
EXAMPLE 2 : Leakage prevention unit
Design concept
![Page 51: Chapter 14 Working Drawing. TOPICS Introduction Detail drawing Assembly drawing Assembly section Dimensioning](https://reader033.vdocument.in/reader033/viewer/2022061408/551a40fd55034619378b5ee0/html5/thumbnails/51.jpg)
EXAMPLE 3 : Fixing parts on a shaft.
1. Place the keys on the
key seats.
2. Insert the parts to the
shaft until their surfaces
lean against the shoulder.
3. Insert collar and then pin
or retaining ring into the
groove.
Assemble steps
![Page 52: Chapter 14 Working Drawing. TOPICS Introduction Detail drawing Assembly drawing Assembly section Dimensioning](https://reader033.vdocument.in/reader033/viewer/2022061408/551a40fd55034619378b5ee0/html5/thumbnails/52.jpg)
EXAMPLE 3 : Fixing parts on a shaft.
1. Key :
- Preventing rotational
movement of parts.
2. Pin and retaining ring :
- Prevent axial movement
of parts on the shaft.
Function
![Page 53: Chapter 14 Working Drawing. TOPICS Introduction Detail drawing Assembly drawing Assembly section Dimensioning](https://reader033.vdocument.in/reader033/viewer/2022061408/551a40fd55034619378b5ee0/html5/thumbnails/53.jpg)
EXAMPLE : Fixing parts on a shaft.
Retaining ring can resist
lower axial force than collar
& pin unit.
Design concept
![Page 54: Chapter 14 Working Drawing. TOPICS Introduction Detail drawing Assembly drawing Assembly section Dimensioning](https://reader033.vdocument.in/reader033/viewer/2022061408/551a40fd55034619378b5ee0/html5/thumbnails/54.jpg)
EXAMPLE : Parts with tapered holes on tapered shaft.
1. Insert the part on the
tapered end of the shaft.
2. Insert the washer
(non-standard).
3. Tightening the nut.
Assemble steps
![Page 55: Chapter 14 Working Drawing. TOPICS Introduction Detail drawing Assembly drawing Assembly section Dimensioning](https://reader033.vdocument.in/reader033/viewer/2022061408/551a40fd55034619378b5ee0/html5/thumbnails/55.jpg)
EXAMPLE : Parts with tapered holes on tapered shaft.
1. Washer :
- Improve the distribution
the tightening force on
the part.
Function
![Page 56: Chapter 14 Working Drawing. TOPICS Introduction Detail drawing Assembly drawing Assembly section Dimensioning](https://reader033.vdocument.in/reader033/viewer/2022061408/551a40fd55034619378b5ee0/html5/thumbnails/56.jpg)
EXAMPLE : Parts with tapered holes on tapered shaft.
Length of the tapered
portion and depth of the
tapered hole require a
calculation.
Design concept
![Page 57: Chapter 14 Working Drawing. TOPICS Introduction Detail drawing Assembly drawing Assembly section Dimensioning](https://reader033.vdocument.in/reader033/viewer/2022061408/551a40fd55034619378b5ee0/html5/thumbnails/57.jpg)
EXAMPLE : Parts having preloaded spring
1. Insert the spring into the casing.
2. Tighten the rod to the spring
loader.
3. Close the cap and tighten.
Spring infree length
Assemble steps
![Page 58: Chapter 14 Working Drawing. TOPICS Introduction Detail drawing Assembly drawing Assembly section Dimensioning](https://reader033.vdocument.in/reader033/viewer/2022061408/551a40fd55034619378b5ee0/html5/thumbnails/58.jpg)
EXAMPLE : Parts having preloaded spring
1. Spring plunger :
- Transmit a force from rod to
spring.
- Keep the spring in a position.
Function
![Page 59: Chapter 14 Working Drawing. TOPICS Introduction Detail drawing Assembly drawing Assembly section Dimensioning](https://reader033.vdocument.in/reader033/viewer/2022061408/551a40fd55034619378b5ee0/html5/thumbnails/59.jpg)
EXAMPLE : Parts having preloaded spring
Spring plunger has a spherical
surface contacts to the cap;
therefore, the rod can align itself
to original position.
Design concept
![Page 60: Chapter 14 Working Drawing. TOPICS Introduction Detail drawing Assembly drawing Assembly section Dimensioning](https://reader033.vdocument.in/reader033/viewer/2022061408/551a40fd55034619378b5ee0/html5/thumbnails/60.jpg)
Mating of Parts
![Page 61: Chapter 14 Working Drawing. TOPICS Introduction Detail drawing Assembly drawing Assembly section Dimensioning](https://reader033.vdocument.in/reader033/viewer/2022061408/551a40fd55034619378b5ee0/html5/thumbnails/61.jpg)
1. Surface finishing
2. Tolerance
- Size
- Geometry
POINTS TO CONSIDER
![Page 62: Chapter 14 Working Drawing. TOPICS Introduction Detail drawing Assembly drawing Assembly section Dimensioning](https://reader033.vdocument.in/reader033/viewer/2022061408/551a40fd55034619378b5ee0/html5/thumbnails/62.jpg)
SURFACE FINISHING
1. To control the accuracy in positioning and
tightness between mating parts.
2. To reduce the friction, especially for the part
moves relative to other parts.
Surface finishing means the quality of a surface.
It relates to the level of roughness of a surface.
Purpose
![Page 63: Chapter 14 Working Drawing. TOPICS Introduction Detail drawing Assembly drawing Assembly section Dimensioning](https://reader033.vdocument.in/reader033/viewer/2022061408/551a40fd55034619378b5ee0/html5/thumbnails/63.jpg)
63
Surface Control
• Why do we need to control surface characteristics?
– Rough surfaces cause friction and wear– It is difficult to make accurate measurements
from rough surfaces
![Page 64: Chapter 14 Working Drawing. TOPICS Introduction Detail drawing Assembly drawing Assembly section Dimensioning](https://reader033.vdocument.in/reader033/viewer/2022061408/551a40fd55034619378b5ee0/html5/thumbnails/64.jpg)
64
Surface Characteristics
• Roughness
– Small hills and valleys found on a surface
– Defined as the arithmetic average of the deviations above and below a mean height of a surface
– Expressed in microinches or micrometers.
![Page 65: Chapter 14 Working Drawing. TOPICS Introduction Detail drawing Assembly drawing Assembly section Dimensioning](https://reader033.vdocument.in/reader033/viewer/2022061408/551a40fd55034619378b5ee0/html5/thumbnails/65.jpg)
Surface Characteristics
• Waviness
– Surface irregularities greater than roughness– Expressed in inches or millimeters
• Lay
– Direction of tool marks on a machined surface.
![Page 66: Chapter 14 Working Drawing. TOPICS Introduction Detail drawing Assembly drawing Assembly section Dimensioning](https://reader033.vdocument.in/reader033/viewer/2022061408/551a40fd55034619378b5ee0/html5/thumbnails/66.jpg)
66Autumn 2009
Surface Texture Symbols
.25 inches.125 inSurface Control Symbol
Material must be removed
Material must not be removed
Material removal not specified
![Page 67: Chapter 14 Working Drawing. TOPICS Introduction Detail drawing Assembly drawing Assembly section Dimensioning](https://reader033.vdocument.in/reader033/viewer/2022061408/551a40fd55034619378b5ee0/html5/thumbnails/67.jpg)
Lay Symbols
M
Parallel to line representing surface
Perpendicular to the line representing the surface
Both directions to the line representing the surface
Multidirectional marks
Circular
Radial
Lay particulate, non-directional, protuberant
C
R
P
Bar added
Symbol location
![Page 68: Chapter 14 Working Drawing. TOPICS Introduction Detail drawing Assembly drawing Assembly section Dimensioning](https://reader033.vdocument.in/reader033/viewer/2022061408/551a40fd55034619378b5ee0/html5/thumbnails/68.jpg)
Examples with Roughness and Lay
24
Average roughness is 0.000024 inches, which is often referred to as 24 microinches or µ inches.
Material must be removed.
2814
Maximum average roughness is 28 microinches.Minimum average roughness is 14 microinches.
Material must not be removed.
45
R
Average roughness is 45 microinchesLines on the surface are radial with respect
to the center of the surface
![Page 69: Chapter 14 Working Drawing. TOPICS Introduction Detail drawing Assembly drawing Assembly section Dimensioning](https://reader033.vdocument.in/reader033/viewer/2022061408/551a40fd55034619378b5ee0/html5/thumbnails/69.jpg)
Assignment
• You are to complete the drawing and the work sheets handed out.
• They are due on