Wallace & Tiernan® Liquid Feed Systems Chem-Ad® Series A Metering Pump
The Chem-Ad® Series A electronically controlled, motor driven diaphragm metering pump is designed specifically for very low feedrate applications, particularly sodium hypochlorite. The pump features a unique, constant circulation liquid end with a calibrated, adjustable plunger for precise feedrate control. This design ensures consistent performance, even with chemicals that tend to outgas, such as hypochlorite.
The Chem-Ad® Series Diaphragm pumps are designed to handle the most demanding applications in the treatment of potable water, swimming pools, wastewater and industrial processes. A well-balanced range of capacities combines with excellent reproducibility and optimal chemical resistance. Chem-Ad® metering pumps are of the positive displacement-type driven by proven overload-proof motors. Since they are available with a wide choice of configurations ranging from manual to flow proportional to setpoint, these pumps can cover any metering requirement.
The XL Series features an integrated LED display panel, touch-pad controls and multiple control functions, including feedrate setpoint with closed-loop control, flow/no-flow monitoring, batch operation and feedrate display.
Water Technologies
Key BenefitsDependable low capacity metering
up to 1.68 LPH (.44 USGPH) and pressures up to 10 Bar (150 PSI)
Reliable metering of most multi-phase fluids, particularly Sodium Hypochlorite, with integral auto de-gasing
Flexible automatic signal input - analog or pulse
Simple user-friendly pump calibration
Continuous accurate chemical dosing
Suitable for unmanned installations with auto controls and optional flow monitoring
Easy to read back-lit digital display of pump capacity, strokes operating mode and alarm
Product Sheet
To Application
Return ToSupply
From Supply
FeedrateAdjustment
Knob
Plunger
Re-CirculationDiaphragm
DescriptionThe Chem-Ad® Series A diaphragm metering pump features manual control, or optional external control, and is designed to handle multi-phase solutions that tend to out-gas.
Due to its unique design incorporating pre-feeding and a gasket-free ceramic piston/cylinder unit the pump can maintain a high reproducibility even when handling very low feed rates at maximum stroke frequency.
Its smooth pulsation characteristics ensure high metering accuracy and long life of diaphragms and valves. Due to its unparalleled low noise and its enclosure, IP65 (NEMA 4X), the Chem-Ad® Series A pump is perfectly suitable for laboratories and humid ambient conditions.
The basic model has an on/off switch, a level switch input, and alarm output connection. The standard liquid end made of PVDF ensures a wide range of chemical resistance.
ControlsManual - E11Manual control is on-line by means of a mechanical stroke length adjustment via a two-turn knob graduated 0 to 100%. An on/off switch is also provided. There are connections to accept level input and alarm output.
Automatic - E60 (XL Model)The automatic E60 (XL Model) includes:An integrated LED display panel for easy to read,
clear indication of operating status and user-friendly programming.
A four key membrane touch pad simplifies function selection.
Local or remote control via analog (0/4-20mA or 20-4/0mA or pulse input signals.
Signal scaling allows for multiplication or division of the pulse input signal.
Flow/no flow verification via an optional flow monitor.
Automatic - E60Plus (XL Model)With the addition of an intelligent control package (ICP) and Oval Gear Meter (OGM), the E60 becomes the full featured E60Plus
and includes:Set point controls with automatic frequency compensation
for constant chemical feed.Chemical consumption data logging.Real time feed rate display.Plug and play with calibration data storage on OGM.Adjustable flow alarm points.
Spares and AccessoriesLiquid End PM Kit® PackagesFor every model of the Chem-Ad® Series A metering pump, a corresponding maintenance kit is available. This economically priced package contains all spare and wear parts for a prompt and quick maintenance of the liquid end.
Suction LanceThis option includes pre-wired, built-in-low and empty level switches, foot valve and strainer. This option is recommended with the Series A pump.
internal 82 %
Oval Gear Meter
Intelligent Control Pack
Selection GuideTo allow easy selection, the Chem-Ad® series of pumps is engineered to the modular design principle. The selection criteria shown to the right provides a perfect guide to define the right pump for the respective duty.
Typical Selection Guide (Example)”*”
CM 1 A4 E60 K F C 99 31
Valve BallsC = Ceramic
O-RingF = Viton®; E = EPDM; K = FFPM/Isolast®
Pump HeadK = PVDF
Control ModeE60 = Auto Control with Digital Display E11 = Manual
Capacity 50HZ 60HZ A1 = 0.20 LPH 0.06 USGPHA2 = 0.50 LPH 0.16 USGPHA3 = 0.90 LPH 0.29 USGPHA4 = 1.40 LPH 0.44 USGPH
Voltage & Cycles1 = 115 V. 60 Hz;3 = 230 V. 50 Hz
Options / Series A E11 E60 E60Plus
On-Off Button X X X
Manual Stroke Length X X X
Stroke Frequency Control X X
Level Input Switch (low level and empty) X X X
Power Cord and Plug X X X
External Analog Input (0-20 or 4-20 mA) X X
External Analog Input (0/4-20 mA or 20-4/0 mA) X X
Input Signal Scaling X X
External Pulse Input X X
Remote On / Off X X
Batch Mode & Pulse Storage X X
Alarm Output & Stroke Pulse Output X X
Membrane Touch Pad X X
Flow Monitoring (OGM Required) X X
Integral Back-Lit Digital Display X X
Password Protection X X
Capacity Display X X
Multiple Language Display (English, German, French) X X
Flow Totalizing X
Set Point Control X
Note -E60Plus models require ICP & OGM combination.
“*” This is the typical configuration code consult factory for product numbers.
www.water.siemens.com
Siemens Water Technologies
Germany+49 8221 [email protected]
United Kingdom+44 1732 [email protected]
USA+1 856 507 [email protected]
© 2008 Siemens Water Technologies Corp.
Literature No.: WT.440.600.001.IE.PS.0908
Subject to change without prior notice.
Wallace & Tiernan, Chem-Ad, and PM Kit are trademarks of Siemens, its subsidiaries
or affiliates. Hastelloy is a trademark of Haynes International, Inc. Isolast is
a trademark of Trelleborg AB. NEMA is a trademark of the National Electrical
Manufacturers Association. Viton is a trademark of DuPont Performance Elastomers
LLC.
The information provided in this literature contains merely general descriptions or
characteristics of performance which in actual case of use do not always apply as
described or which may change as a result of further development of the products.
An obligation to provide the respective characteristics shall only exist if expressly
agreed in the terms of the contract.
Maximum Capacity LPH / USGPH 60 Hz LPH @ 50 Hz
0.24 / 0.06 0.6 / 0.16 1.08 / 0.29 1.68 / 0.44
0.2 0.5 0.9 1.4
Max. Back Pressure 10 Bar @50 Hz; 120 PSI at 60Hz
Piston Diameter (mm) 3 4.76 6.34 8
Stroke Frequency Max. (SPM) @ 50/60 Hz 122 / 144
Capacity / Stroke Max. (cm3) 0.027 0.068 0.12 0.19
Accuracy + 2% over 10:1 range (minimum of 20% stroke length)
Max. Suction Lift at 100% * 2 Meters (6 Ft)
Max. Back Pressure of Return 0.3 Bar (4.5 PSI)
Suction and Return 2m Duo Hose 6mm ID Supplied
Metering Discharge1/4” OD x 0.040” Wall Thickness
2 mm x 4mm 4mm x 6mm
Power Supply230 V, 50 Hz / 115 V, 60 Hz
(Power Cord and Plug Supplied)
Current (mA) 115/230 VAC 81@ 50 Hz / 172 @ 60 Hz
Max. Power Input (W) 115/230 VAC 18.7
Enclosure IP65 (NEMA 4X)
Max. Ambient Temp. 40°C (104°F)
Insulation Class B
Alarm OutputLow Level and Tank Empty Contact
Dr contact 24 V, 3 Amps AC/DC or 240 V, 3 Amps AC/DC
mA Input0/4-20 mA or 20-4/0 mA (E60 & E60Plus)
Max. Impendance 50 Ohms
Pulse InputMin. pulse length 15msec = 1 stroke; Max. pulse is 122 pulses per minute
(@ 50 Hz) / 146 pulses per minute (@ 60 Hz) = continuous running
Stroke Signal Ouput 1 Pulse Per Stroke, Dry Contact Rated 24 V DC, 300 mA
Weight 2.4 Kgs (6 Lbs)
Dimensions L 218 mm x W 220 mm x H 143 mm (8 9/16” x 8 11/16” x 5 5/8”)
* Note: Suction lifts with clean, wetted valves. Suction lance with tank level switches is recommended for all capacities. All data refers to water at 20°C (68°F) as per the instruction manual.
Technical Data
Materials of ConstructionPump Head: PVDFMetering Piston/Cylinder: CeramicDiaphragm: PTFE-EPDM CompositeValves: PVDFValve Balls: CeramicO-Ring: FPM, or EPDM, FFPM/Isolast®Valve Springs: Hastelloy®Housing/Finish: Thermoplastic Polyester
Wallace & Tiernan® Liquid Feed Systems Chem-Ad® Series B Metering Pump
The Chem-Ad® Series B electronically controlled diaphragm metering pump is designed for dependable reliable metering of fluids even at minimum feedrates. A standard PVDF head and valve set provide greater resistance to most chemicals.
The Chem-Ad® Series of diaphragm metering pumps are designed to handle the most demanding applications in the treatment of potable water, swimming pools, wastewater and industrial processes. A well-balanced range of capacities combines with excellent reproducibility and optimal chemical resistance. Chem-Ad® metering pumps are of the positive displacement-type driven by proven overload-proof motors. Since they are available with a wide choice of configurations ranging from manual to flow proportional to setpoint, these pumps can cover any metering requirement.
The XL Series features an integrated LED display panel, touch-pad controls and multiple control functions, including feedrate setpoint with closed-loop control, flow/no-flow monitoring, batch operation and feedrate display.
Water Technologies
Key BenefitsDependable low capacity metering
up to 1.68 LPH (0.44 GPH) and pressures up to 10 Bar (150 PSI)
Reliable metering of fluids even at minimal feed rates
Flexible automatic signal input - analog or pulse
Simple user-friendly pump calibration
Continuous accurate chemical dosing
Suitable for unmanned installations with auto controls and optional flow monitoring
Easy to read back-lit digital display of pump capacity, strokes operating mode and alarm
Low maintenance PVDF head standard
Corrosion resistant IP65 (NEMA 4X)enclosure
CE marked electronics
Product Sheet
To Point ofApplication
From Supply
Plunger
PumpingDiaphragm
DescriptionThe Chem-Ad® Series B diaphragm metering pump features integrated automatic analog or pulse controls, and is designed to handle aggressive chemicals solutions with flow monitoring capabilities.
Its smooth pulsation characteristics, along with double and triple check valve configuration, ensure high metering accuracy and long life of diaphragms and liquid ends. Due to its unparalleled low noise level and its enclosure, IP 65 (NEMA 4X), the Chem-Ad® Series B pump is perfectly suitable for laboratories and humid ambient conditions.
The basic model has an on/off switch. The standard liquid end made of PVDF ensures a wide range of chemical resistance.
ControlsManual - E10Manual control is on-line by means of a mechanical stroke length adjustment via a two-turn knob graduated 0 to 100%. An on/off switch is also provided. There are connections to accept level input and alarm output.
Automatic - E60 (XL Model)The automatic E60 (XL Model) includes:An integrated LED display panel for easy to read,
clear indication of operating status and user-friendly programming.
A four key membrane touch pad simplifies function selection.
Local or remote control via analog (0/4-20mA or 20-4/0mA) or pulse input signals.
Signal scaling allows for multiplication or division of the pulse input signal.
Flow/no flow verification via an optional flow monitor.
Automatic - E60Plus (XL Model)With the addition of an intelligent control package (ICP) and Oval Gear Meter (OGM), the E60 becomes the full featured E60Plus
and includes:Set point controls with automatic frequency compensation
for constant chemical feed.Chemical consumption data logging.Real time feed rate display.Plug and play with calibration data storage on OGM.Adjustable flow alarm points.
Spares and AccessoriesLiquid End PM Kit® PackagesFor every model of the Chem-Ad® Series B metering pump, a corresponding maintenance kit is available. This economically priced package contains all spare and wear parts for a prompt and quick maintenance of the liquid end. The Chem-Ad® series of pumps is available with additional useful accessories, three are listed below.
Suction LanceThis option includes pre-wired, built-in-low and empty level switches, foot valve and strainer.
Auto DeGas ValveAn optional auto de-gas valve is available for metering liquids such as sodium hypochlorite, that tend to out-gas at low feed rates and/or during start-stop operation.
Multi-Function ValveAn optional multi-function valve is available for priming, back pressure, pressure relief, and drain.
Oval Gear Meter
Intelligent Control Pack
Selection GuideTo allow easy selection, the Chem-Ad® series of pumps is engineered to the modular design principle. The selection criteria shown to the right provides a perfect guide to define the right pump for the respective duty.
Options / Series B E10 E60 E60Plus
On-Off Button X X X
Manual Stroke Length X X X
Stroke Frequency Control X X
Level Input Switch (low level and empty) X X X
Power Cord and Plug X X X
External Analog Input (0-20 or 4-20 mA) X X
External Analog Input (0/4-20 mA or 20-4/0 mA) X X
Input Signal Scaling X X
External Pulse Input X X
Remote On / Off X X
Batch Mode & Pulse Storage X X
Alarm Output & Stroke Pulse Output X X
Membrane Touch Pad X X
Flow Monitoring (OGM Required) X X
Integral Back-Lit Digital Display X X
Password Protection X X
Capacity Display X X
Multiple Language Display (English, German, French) X X
Flow Totalizing X
Set Point Control X
Note -E60Plus models require ICP & OGM combination.* This is a typical configuration code, consult factory for product part number
Typcial Selection Guide (Example)”*”
CM 1 B6 E60 K F C 99 33
Connections33 = PVDF;34 = Polypropylene;35 = Stainless Steel
Springs99 = No Spring;02 = Viscous Fluids to 600 cP
Valve BallsC = Ceramic;S = Stainless Steel;T = Teflon®
O-RingF = Viton®;E = EPDM; K = FFPM/Isolast®
Pump HeadK = PVDF;S = Stainless Steel;P = Polypropylene
Control ModeE60 = Auto Control with Digital Display; E10 = Manual
Capacity 50HZ 60HZ B1 = 1.40 LPH 0.44 USGPHB2 = 2.50 LPH 0.79 USGPHB3 = 4.80 LPH 1.52 USGPHB4 = 4.30 LPH 1.36 USGPHB5 = 7.20 LPH 2.28 USGPHB6 = 11.2 LPH 3.55 USGPH
Voltage & Cycles1 = 115 V. 60 Hz;3 = 230 V. 50 Hz
www.water.siemens.com
Siemens Water Technologies
Germany+49 8221 [email protected]
United Kingdom+44 1732 [email protected]
USA+1 856 507 [email protected]
© 2008 Siemens Water Technologies Corp.
Literature No.: WT.440.600.002.IE.PS.0908
Subject to change without prior notice.
Wallace & Tiernan, Chem-Ad, and PM Kit are trademarks of Siemens, its subsidiaries
or affiliates. Hastelloy is a trademark of Haynes International, Inc. Isolast is
a trademark of Trelleborg AB. NEMA is a trademark of the National Electrical
Manufacturers Association. Teflon and Viton are trademarks of Dupont Perfomance
Elastomers LLC.
The information provided in this literature contains merely general descriptions or
characteristics of performance which in actual case of use do not always apply as
described or which may change as a result of further development of the products.
An obligation to provide the respective characteristics shall only exist if expressly
agreed in the terms of the contract.
Maximum Capacity LPH / USGPH 60 Hz LPH @ 50 Hz
1.65 / 0.44 3.0 / 0.79 5.76 / 1.52 5.16 / 1.36 8.64 / 2.28 13.44 / 3.55
1.4 2.5 4.8 4.3 7.2 11.2
Max. Back Pressure (Bar @ 50 Hz / PSI @ 60Hz)
10 / 120 4 / 50 10 / 120 5 / 60
Stroke Frequency Max. (SPM) @ 50/60 Hz 122 / 144
Capacity / Stroke Max. (cm3) 0.19 0.34 0.57 0.65 0.98 1.51
Accuracy Better than + 3%
Max. Suction Lift at 100% * 2 Meters / (6 Ft)
Suction mm (inches) Connection 4 and 6 mm(3/8” tubing connection)
Discharge Connection 6, 8,10 or 12 mm tubing (3/8” tubing)
Power Supply230 V, 50 Hz / 115 V, 60 Hz
(Power Cord and Plug Supplied)
Current (mA) 115/230 VAC 45 @ 50 Hz / 100 @ 60 Hz 81 @ 50 Hz / 172 @ 60 Hz130 @ 50 Hz / 300 @ 60 Hz
Max. Power Input (W) 115/230 VAC 10.4 18.7 30
Enclosure IP65 (NEMA 4X)
Max. Ambient Temp. 40°C (104°F)
Insulation Class B
Alarm OutputLow Level and Tank Empty Contact
Dry contact 24 V, 3 Amps AC/DC or 240 V, 3 Amps AC/DC
mA Input0/4-20 mA or 20-4/0 mA (E60 & E60Plus)
Max. Impendance 50 Ohms
Pulse Input / Max. Pulse FrequencyMin. pulse length 15msec = 1 stroke; Max. pulse is 122 pulses per minute
(@ 50 Hz) / 146 pulses per minute (@ 60 Hz) = continuous running
Stroke Signal Ouput 1 Pulse Per Stroke, Dry Contact Rated 24 V DC, 300 mA
Weight 3.2 Kgs (7 Lbs)
Dimensions L 246 mm x W 136 mm x H 147 mm ( 9 11/16” x 5 5/16” x 5 3/4”)
* Note: Suction lifts with clean, wetted valves. Suction lance with tank level switches is recommended for all capacities. All data refers to water at 20°C (68°F) as per the instruction manual.
Technical Data
Materials of ConstructionPump Head: PVDF (Standard), PP, Stainless SteelDiaphragm: PTFE CompositeO-Ring: Viton® (Standard), EPDM, Isolast®Balls: Ceramic (Standard), Stainless Steel, Teflon®Housing/Finish: Thermoplastic Polyester
Wallace & Tiernan® Liquid Feed Systems Chem-Ad® Series C Metering Pump
The Chem-Ad® Series C electronically controlled metering pump is designed for dependable multi-capacity relaible metering of fluids. A standard polypropylene head and valve set, with optional PVDF and stainless steel, provide a greater resistance to most chemicals.
The Chem-Ad® Series of diaphragm metering pumps are designed to handle the most demanding applications in the treatment of potable water, swimming pools, wastewater and industrial processes. A well-balanced range of capacities combines with excellent reproducibility and optimal chemical resistance. Chem-Ad® metering pumps are of the positive displacement-type driven by proven overload-proof motors. Since they are available with a wide choice of configurations ranging from manual to flow proportional to setpoint, these pumps can cover any metering requirement.
The XL Series, shown below, features an integrated LED display panel, touch-pad controls and multiple control functions, including feedrate setpoint with closed-loop control, flow/no-flow monitoring, batch operation and self-calibration and feedrate display.
Water Technologies
Key BenefitsDependable multi-capacity metering
up to 19 LPH (5 USGPH) and pressures up to 10 Bar (150 psi)
Reliable metering accuracy of all fluids
Flexible automatic signal input - analog or pulse
Simple user-friendly pump calibration
Continuous accurate chemical dosing
Suitable for unmanned installations with auto controls and optional flow monitoring
Easy to read back-lit digital display of pump capacity, strokes operating mode and alarm
Low maintenance PVDF head standard
Corrosion resistant IP65 enclosureCE marked electronics
Product Sheet
To Point ofApplication
From Supply
Plunger
PumpingDiaphragm
DescriptionThe Chem-Ad® Series C diaphragm metering pump features integrated automatic analog or pulse controls, and is designed to handle aggressive chemicals solutions with flow monitoring capabilities.
Its smooth pulsation characteristics, along with double check valve configuration, ensure high metering accuracy and long life of diaphragms and liquid ends. Due to its unparalleled low noise level and its enclosure, IP 65 (NEMA 4X), the Chem-Ad® Series C pump is perfectly suitable for laboratories and humid ambient conditions.
The basic model has an on/off switch. The standard liquid end made of Polypropylene ensures a wide range of chemical resistance.
ControlsManual - E00Manual control is on-line by means of a mechanical stroke length adjustment via a two-turn knob graduated 0 to 100%. An on/off switch is also provided. There are connections to accept level input and alarm output.
Automatic - E60 (XL Model)The automatic E60 (XL Model) includes:An integrated LED display panel for easy to read,
clear indication of operating status and user friendly programming.
A four key membrane touch pad simplifies function selection.
Local or remote control via analog (0/4-20mA or 20-4/0mA) or pulse input signals.
Signal scaling allows for multiplication or division of the pulse input signal.
Flow/no flow verification via an optional flow monitor.
Automatic - E60Plus (XL Model)With the addition of an intelligent control package (ICP) and Oval Gear Meter (OGM), the E60 becomes the full featured E60Plus
and includes:Set point controls with automatic frequency compensation
for constant chemical feed.Chemical consumption data logging.Real time feed rate display.Plug and play with calibration data storage on OGM.Adjustable flow alarm points.
Spares and AccessoriesLiquid End PM Kit® PackagesFor every model of the Chem-Ad® Series C metering pump, a corresponding maintenance kit is available. This economically priced package contains all spare and wear parts for a prompt and quick maintenance of the liquid end. The Chem-Ad® series of pumps is available with additional useful accessories, two are described below.
Suction LanceThis option includes pre-wired, built-in-low and empty level switches, foot valve and strainer. This option is recommended with the Series A pump.
Multi-Function ValveAn optional multi-function valve is available for priming, back pressure, pressure relief, and drain.
Oval Gear Meter
Intelligent Control Pack
Selection GuideTo allow easy selection, the Chem-Ad® series of pumps is engineered to the modular design principle. The selection criteria shown to the right provides a perfect guide to define the right pump for the respective duty.
Options / Series C E00 E60 E60Plus
On-Off Button X X X
Manual Stroke Length X X X
Stroke Frequency Control X X
Level Input Switch (low level and empty) X X X
Power Cord and Plug X X X
External Analog Input (0-20 or 4-20 mA) X X
External Analog Input (0/4-20 mA or 20-4/0 mA) X X
Input Signal Scaling X X
External Pulse Input X X
Remote On / Off X X
Batch Mode & Pulse Storage X X
Alarm Output & Stroke Pulse Output X X
Membrane Touch Pad X X
Flow Monitoring (OGM Required) X X
Integral Back-Lit Digital Display X X
Password Protection X X
Capacity Display X X
Multiple Language Display (English, German, French) X X
Flow Totalizing X
Set Point Control X
Note -E60Plus models require ICP & OGM combination.* This is a typical configuration code, consult factory for product part number
Typical Selection Guide (Example) “*”
CM 1 C3 E60 K F C 99 36
Connections36 = Polypropylene;37 = PVDF;47 = Stainless Steel
Valve Type99 = Standard;03 = Spring Loaded
Valve BallsC = Ceramic;S = Stainless SteelT = Teflon®
O-RingF = Viton®;E = EPDM; K = FFPM/Isolast®
Pump HeadK = PVDF;S = Stainless Steel;P = Polypropylene
Control ModeE60 = Auto Control with Digital Display; E00 = Manual
Capacity 50HZ 60HZ C1 = 16 LPH 5 USGPHC2 = 25 LPH 8 USGPHC3 = 54 LPH 17 USGPHC4 = 80 LPH 25 USGPHC5 = 120 LPH 38 USGPH
Voltage & Cycles1 = 115 V. 60 Hz;3 = 230 V. 50 Hz
Typical Installation
www.water.siemens.com
Siemens Water Technologies
Germany+49 8221 [email protected]
United Kingdom+44 1732 [email protected]
USA+1 856 507 [email protected]
© 2008 Siemens Water Technologies Corp.
Literature No.: WT.440.600.003.IE.PS.0908
Subject to change without prior notice.
Wallace & Tiernan, Chem-Ad, and PM Kit are trademarks of Siemens, its subsidiaries
or affiliates. Isolast is a trademark of Trelleborg AB. Viton and Teflon are trademarks
of Dupont Perfomance Elastomers LLC. NEMA is a trademark of the National
Electrical Manufacturers Assosication.
The information provided in this literature contains merely general descriptions or
characteristics of performance which in actual case of use do not always apply as
described or which may change as a result of further development of the products.
An obligation to provide the respective characteristics shall only exist if expressly
agreed in the terms of the contract.
Maximum Capacity LPH / USGPH 60 Hz LPH @ 50 Hz
19 /5 30 / 8 65 /17 96 /25 144 / 38
16 25 54 80 120
Max. Back Pressure (Bar@50Hz/PSI @60Hz) 10 / 120 4 /50 3 / 35
Stroke Frequency Max. (SPM) @ 50/60 Hz 122 / 144
Capacity / Stroke Max. (cm3) 2.1 3.4 7.3 10.8 16.1
Accuracy Better than + 3%
Max. Suction Lift at 100% * 2 Meters / (6 Ft)
Suction / Discharge Connection G5/8” ( 1/2” NPT) G 1 1/4” ( 1/2” NPT)
Power Supply 230 V, 50 Hz / 115 V, 60 Hz
Current (mA) 115/230 VAC 0.95 @ 50 Hz / 1.44 @ 60 Hz
Max. Power Input (W) 115/230 VAC 90
Enclosure IP55
Max. Ambient Temp. 40°C (104°F)
Insulation Class F
Alarm OutputLow Level and Tank Empty Contact
Dry contact 24 V, 3 Amps AC/DC or 240 V, 3 Amps AC/DC
mA Input0/4-20 mA or 20-4/0 mA (E60 & E60Plus)
Max. Impendance 50 Ohms
Pulse Input / Max. Pulse FrequencyMin. pulse length 15msec = 1 stroke; Maz. pulse is 122 pulses per minute
(@ 50 Hz) / 146 pulses per minute (@ 60 Hz) = continuous running
Stroke Signal Ouput 1 Pulse Per Stroke, Dry Contact Rated 24 V DC, 300 mA
Weight 9 Kgs (20 Lbs) 8.6 Kgs/19 lbs
Dimensions L 330 mm x W 138 mm x H 371 mm ( 13” x 5 7/16” x 14 5/8)
* Note: Suction lifts with clean, wetted valves. Suction lance with tank level switches is recommended for all capacities. All data refers to water at 20°C (68°F) as per the instruction manual.
Technical Data
Materials of ConstructionPump Head: PP (Standard), PVDF, Stainless Steel, PVCDiaphragm: PTFE CompositeO-Ring: Viton® (Standard), EPDM, Isolast®Balls: Ceramic (Standard), Stainless Steel, Teflon®Housing/Finish: Thermoplastic Polyester