Chilled water flow rate guidelines for process chiller systemsBelow are some simple chiller pipe sizing guidelines along with some basic tips on how to properly sizeand run you water lines to your chilled water process. Look over the chiller links they will greatly helpif you need further information about chillers.
WWW.chillers.comPipe sizing guide based on 10' Head loss/100' of pipe (Old steel pipe C = 100 )
1/2" = 2 GPM 1-1/2" = 30 GPM 4" = 320 GPM
3/4" = 5 GPM 2" = 50 GPM 5" = 600 GPM
1" = 10 GPM 2-1/2" = 90 GPM 6" = 900 GPM
1-1/4" = 20 GPM 3" = 160 GPM 8" = 2000 GPM
These figures are based on a 100 ft run in steel pipe. In most cases the flow rates will be better.
Chiller Warranty Service- Click here for details
Professional Refrigeration TroubleshooterThe first hands
onChiller/HVAC/Rtroubleshootinghandbook is outin publication.This is a musthave book foryou and your
servicetechnicians. Itwill save you
time and moneyalong with
passing on thevast knowledge
of 60 years
Chiller flow rates and guidelines for chilled water system piping http://www.chillers.com/Flowrates.htm
1 of 3 19-Apr-13 9:10 PM
experience.
Click here fordetails
Click here forE-mail requests
Flow meters of all kinds...click here.......Flowmeterdirectory.com is the most comprehensive web portal on flow meter technology,manufacturers, suppliers, and system designers. The site contains both commercial andnon-commercial information on flow meter types, manufacturers, suppliers, articles andtechnology.
_________________________________________________________________________________________
Plumbing sizes (chiller water systems 35-70F)Rule of thumb tips for sizing:
1. If ever in question, use the water line sizes exiting the chiller. The lines are that size fora reason. (Do not reduce)
2. Reducing lines will drastically reduce your heat removal from your process andincrease your electrical running costs.
3. Install full port valves (ball style not gate valves). Make sure there are valves to isolate:screens, chillers, tanks and pumps.
4. Never use iron or steel piping. (always use SCH80 PVC, copper or stainless steel). SCH80 is the least expensive & best.
How to pick your water line sizes.Home Page
This page was last updated on January 1, 2013
Click on any of the below hyper linked topics- especially if your browser does not support the javanavigation bar above.
Chiller technical support for, plastics chillers, printing chillers, oem chillers, MRI chillers, laser chillers, air dryers,, hvacchillers
Chiller sales for,, chiller rental, used process chillers 2-20 ton, used process chillers 25-80 ton, used chillers 90-350 ton, rentalchiller 8-80 ton, rental chiler 100-400 tons
Chiller flow rates and guidelines for chilled water system piping http://www.chillers.com/Flowrates.htm
2 of 3 19-Apr-13 9:10 PM
About John C Schaub Inc,, chiller service, rates and hours, geographic chiller service regions, customer references
What is a chiller, chiller refrigeration cycle, chiller tonnage equations, chiller tonnage design parameters, size a chiller, chillersizing
Chiller antifreeze info,, dowtherm, dowfrost, freezepoint mixture, chiller phone support, chiller water treatment, chiller waterflow rates, emergency chiller service
This site was created and maintained by Jack SchaubAny inquiries please E-mail the Webmaster: [email protected]
John C. Schaub Inc. (On line-11/96) 23 Adams St. Mt. laurel NJ. 08054 phone 856-235-2120 fx 856-235-7033Copyright 1996-2013
Chiller flow rates and guidelines for chilled water system piping http://www.chillers.com/Flowrates.htm
3 of 3 19-Apr-13 9:10 PM