Cisco VPN Solutions Center Equipment Module Configuration GuideRelease 4.1January 2003
Corporate HeadquartersCisco Systems, Inc.170 West Tasman DriveSan Jose, CA 95134-1706 USAhttp://www.cisco.comTel: 408 526-4000
800 553-NETS (6387)Fax: 408 526-4100
Text Part Number: OL-1816-02
THE SPECIFICATIONS AND INFORMATION REGARDING THE PRODUCTS IN THIS MANUAL ARE SUBJECT TO CHANGE WITHOUT NOTICE. ALL STATEMENTS, INFORMATION, AND RECOMMENDATIONS IN THIS MANUAL ARE BELIEVED TO BE ACCURATE BUT ARE PRESENTED WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED. USERS MUST TAKE FULL RESPONSIBILITY FOR THEIR APPLICATION OF ANY PRODUCTS.
THE SOFTWARE LICENSE AND LIMITED WARRANTY FOR THE ACCOMPANYING PRODUCT ARE SET FORTH IN THE INFORMATION PACKET THAT SHIPPED WITH THE PRODUCT AND ARE INCORPORATED HEREIN BY THIS REFERENCE. IF YOU ARE UNABLE TO LOCATE THE SOFTWARE LICENSE OR LIMITED WARRANTY, CONTACT YOUR CISCO REPRESENTATIVE FOR A COPY.
The Cisco implementation of TCP header compression is an adaptation of a program developed by the University of California, Berkeley (UCB) as part of UCB’s public domain version of the UNIX operating system. All rights reserved. Copyright © 1981, Regents of the University of California.
NOTWITHSTANDING ANY OTHER WARRANTY HEREIN, ALL DOCUMENT FILES AND SOFTWARE OF THESE SUPPLIERS ARE PROVIDED “AS IS” WITH ALL FAULTS. CISCO AND THE ABOVE-NAMED SUPPLIERS DISCLAIM ALL WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING, WITHOUT LIMITATION, THOSE OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT OR ARISING FROM A COURSE OF DEALING, USAGE, OR TRADE PRACTICE.
IN NO EVENT SHALL CISCO OR ITS SUPPLIERS BE LIABLE FOR ANY INDIRECT, SPECIAL, CONSEQUENTIAL, OR INCIDENTAL DAMAGES, INCLUDING, WITHOUT LIMITATION, LOST PROFITS OR LOSS OR DAMAGE TO DATA ARISING OUT OF THE USE OR INABILITY TO USE THIS MANUAL, EVEN IF CISCO OR ITS SUPPLIERS HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
Cisco VPN Solutions Center Equipment Module Configuration GuideCopyright © 2003, Cisco Systems, Inc.All rights reserved.
g y g y g gFastTrack, the iQ Logo, iQ Net Readiness Scorecard, Networking Academy, ScriptShare, SMARTnet, TransPath, and Voice LAN are trademarks of Cisco Systems, Inc.; Changing the Way We Work, Live, Play, and Learn, The Fastest Way to Increase Your Internet Quotient, and iQuick Study are service marks of Cisco Systems, Inc.; and Aironet, ASIST, BPX, Catalyst, CCDA, CCDP, CCIE, CCNA, CCNP, Cisco, the Cisco Certified Internetwork Expert logo, Cisco IOS, the Cisco IOS logo, Cisco Press, Cisco Systems, Cisco Systems Capital, the Cisco Systems logo, Empowering the Internet Generation, Enterprise/Solver, EtherChannel, EtherSwitch, Fast Step, GigaStack, Internet Quotient, IOS, IP/TV, iQ Expertise, LightStream, MGX, MICA, the Networkers logo, Network Registrar, Packet, PIX, Post-Routing, Pre-Routing, RateMUX, Registrar, SlideCast, StrataView Plus, Stratm, SwitchProbe, TeleRouter, and VCO are registered trademarks of Cisco Systems, Inc. and/or its affiliates in the U.S. and certain other countries.
All other trademarks mentioned in this document or Web site are the property of their respective owners. The use of the word partner does not imply a partnership relationship between Cisco and any other company. (0301R)
Cisco VPN SOL-1816-02
C O N T E N T S
About This Guide i
Audience i
Organization i
Related Documents ii
Conventions ii
Installation iii
C H A P T E R 1 Getting Started 1-1
Configuration 1-2
Software Requirements 1-3
License Keys 1-3
Giving Cisco Provisioning Center Permissions to the Cisco VPN Solution Center CORBA Servers 1-4
Configuring Name Resolution 1-5
Task Logs 1-5
Cisco VPN Solution Center Repository Cleanup Utility 1-5
C H A P T E R 2 Uploading Fabric and Services 2-1
Initial System Upload 2-1
Uploading Fabric and Service Element 2-2
Valid States for Service Upload 2-3
Uploading Fabric Elements for a Network Object 2-4
Uploading Fabric and Service Elements for a Network Object 2-4
Uploading Services From a Customer Object 2-5
Uploading Services From a CE Router Object 2-5
Incremental Upload 2-6
Viewing the Upload Progress 2-6
Monitoring Upload Progress 2-6
Viewing the Upload Log 2-6
Service Request Audits 2-7
Auditing New Service Requests Before Upload 2-7
Auditing Existing Service Requests Before Upload 2-8
Auditing All Service Requests Before Upload 2-8
Collecting New VPN Routing Information and Auditing New Service Requests Before Upload 2-8
iolutions Center Equipment Module Configuration Guide
Contents
Collecting Existing VPN Routing Information and Auditing Existing Service Requests Before Upload 2-9
Collecting VPN Routing Information and Auditing All Service Requests Before Upload 2-9
Re-Upload 2-10
C H A P T E R 3 Working with Profiles and Templates 3-1
Working with Profiles 3-1
Creating a Default Logical Port Profile 3-2
Modifying a Logical Port Profile 3-2
Deleting a Logical Port Profile 3-3
Cisco VPN Logical Port Profile Attributes 3-3
Working with Custom Templates 3-3
Free Form Templates 3-3
Template Structure 3-3
Saving Free Form Templates 3-4
Templates from the Cisco VPN Solution Center 3-4
Prototemplates from Cisco Provisioning Center 3-5
Template Behavior During SRVC Creation 3-6
Template Behavior During SRVC Modification 3-6
Template Behavior During SRVC Deletion 3-6
Template Maintenance 3-6
Cisco VPN Solution Center Templates 3-7
A P P E N D I X A Attribute Reference A-1
Table Conventions A-2
VPN Network A-5
VPN Admin Domain A-8
VPN Region A-10
VPN Address Pool A-12
VPN Customer A-14
VPN Site A-16
VPN CoS A-18
VPN CoS Class A-21
VPN A-23
VPN CERC A-25
VPN PE Router A-27
VPN CE Router A-32
VPN Physical Port A-37
iiCisco VPN Solutions Center Equipment Module Configuration Guide
OL-1816-02
Contents
VPN ATM Logical Port A-41
VPN Frame Relay Logical Port A-49
VPN Logical Port A-57
VPN SVRC A-63
VPN CERC Membership A-73
VPN Redistributed Protocol A-75
VPN Route A-76
VPN Secondary Address A-77
VPN SC Template A-78
GL O S S A R Y
IN D E X
iiiCisco VPN Solutions Center Equipment Module Configuration Guide
OL-1816-02
About This Guide
This document describes the Cisco VPN Solution Center Equipment Module for Cisco Provisioning Center, release 4.1.
AudienceThe Cisco VPN Solutions Center Equipment Module Configuration Guide provides information about how to configure and use the Cisco VPN Solution Center Equipment Module with Cisco Provisioning Center.
This document is intended for personnel who are involved with:
• Network Planning
• Network Management
• Cisco Provisioning Center Deployment
• Integration with Cisco Provisioning Center
OrganizationThis guide includes the following chapters and appendices:
Table 1 Document Organization
Chapter/Appendix Title Description
“About This Guide” Includes information about documentation conventions and organization.
Chapter 1, “Getting Started” Outlines configuration tasks, software requirements, hardware compatibility, and how to create network and node objects.
Chapter 2, “Uploading Fabric and Services”
Details the process of uploading information from your network into the Cisco Provisioning Center database.
Chapter 3, “Working with Profiles and Templates”
Briefly describes the logical port configurations possible with Cisco VPN Solution Center.
iCisco VPN Solutions Center Equipment Module Configuration Guide
OL-1816-02
About This GuideRelated Documents
Related DocumentsThis guide refers you to other documents within the Cisco Provisioning Center documentation suite. Table 2 lists these documents.
ConventionsVarious formatting conventions are used in this guide to make it easier for you to recognize and use specific types of information. Table 3 lists these conventions.
Appendix A, “Attribute Reference”
Lists the attributes for the objects available through this Equipment Module.
Glossary Includes definitions for acronyms used throughout this guide.
Table 1 Document Organization
Chapter/Appendix Title Description
Table 2 Related Documents
Name Part Number
Documentation Guide for Cisco Provisioning Center Release 4.1 78-15305-01
Release Notes for Cisco Provisioning Center Release 4.1 OL-3559-01
Cisco Provisioning Center User’s Guide OL-1804-01
Cisco Provisioning Center Installation Guide OL-3552-01
Cisco Provisioning Center Administration Guide OL-3553-01
Cisco Provisioning Center Programmer’s Guide OL-1813-01
Cisco Provisioning Center Programmer’s Reference OL-1818-01
Cisco Provisioning Center Equipment Module Configuration Guides various
Cisco Provisioning Center Service Application Solutions Guides various
Table 3 Document Conventions
Convention Description Example
Bold Text Within a procedure, bold text indicates specific words in the GUI.
Click the networks button on the Navigation Bar.
Italicized Text Within a procedure, italicized text indicates text that should be replaced with the name of the element or object that is specific to your network configuration.
Navigate to networks > Cisco NI-1 DSLAM Equipment Module > Profiles > Service Element Profile.
iiCisco VPN Solutions Center Equipment Module Configuration Guide
OL-1816-02
About This GuideInstallation
InstallationTo install Cisco Provisioning Center, you must install Cisco Provisioning Center Resource Models, Service Applications and Equipment Modules. For more information about installing Cisco Provisioning Center, refer to the CPC Installation Guide.
courier Text Commands formatted as courier indicate shell commands that must be entered exactly as shown.
export CCP_ACTIVATION_TIMEOUT=180
Square Brackets
Within a command, optional parameters are shown in square brackets.
SYnpt [-s[CDRST] | -h[R] | -r[R]]
Table 3 Document Conventions
Convention Description Example
iiiCisco VPN Solutions Center Equipment Module Configuration Guide
OL-1816-02
About This GuideInstallation
ivCisco VPN Solutions Center Equipment Module Configuration Guide
OL-1816-02
Cisco VPN Solutions CenterOL-1816-02
C H A P T E R 1
Getting StartedThe Cisco VPN Solutions Center Equipment Module supports the provisioning of interfaces between provider edge routers (PE) and customer edge routers (CE) so that customers with a common VPN have IP connectivity across the Service Provider network, and no visibility to customer networks in other VPNs.
This Equipment Module allows Cisco Provisioning Center Services to integrate the Cisco VPN Solution Center with various access networks. The Cisco VPN Solution Center is a network manager for Cisco’s MPLS based VPNs. It manages the PE and CE routers to which it connects but does not manage the core network over which the PEs communicate or the networks behind the CEs. This Equipment Module is insulated from the network hardware by the Cisco VPN Solution Center.
The Cisco VPN Solutions Center Equipment Module now supports multiple versions of VPN SC simultaneously.
Together with the Cisco Provisioning Center IP VPN Service Application, the Cisco VPN Solutions Center Equipment Module creates VPN services by provisioning the interfaces between the PE and the CE routers.
The IP VPN Service Application is used to create all of the required objects. You will then use the Cisco VPN Solutions Center Equipment Module to upload from VPN SC and then audit your services as required.
Interfaces and/or sub-interfaces are activated as required. Sub-interfaces are required when interface types are ATM, Serial/HSSI/POS with Frame Relay encapsulation or Fast Ethernet/Gigabit Ethernet with ISL encapsulation. Sub-interface numbers may be autogenerated through this equipment module.
The Cisco VPN Solutions Center Equipment Module supports the following interface types:
1-1 Equipment Module Configuration Guide
Chapter 1 Getting StartedConfiguration
This Equipment Module supports Cisco Provisioning Center threading of PVCs up to its PE or CE interface, but not through the routers.
ConfigurationTo configure the Cisco VPN Solutions Center Equipment Module and allow Cisco Provisioning Center to communicate with it, you must complete the steps in Table 1-1.
• ATM
• WAN Switch
• Cable
• FDDI
• Ethernet
• Fast Ethernet
• Fast Ethernet with ISL encapsulation
• Gigabit Ethernet
• Gigabit Ethernet with ISL encapsulation
• Serial
• Serial with PPP encapsulation
• Serial with HDLC encapsulation
• Serial with Frame Relay encapsulation
• Serial with IETF Frame Relay encapsulation
• POS
• POS with PPP encapsulation
• POS with HDLC encapsulation
• POS with Frame Relay encapsulation
• POS with IETF Frame Relay encapsulation
• HSSI
• HSSI with PPP encapsulation
• HSSI with HDLC encapsulation
• HSSI with Frame Relay encapsulation
• HSSI with IETF Frame Relay encapsulation
Table 1-1 Cisco VPN Solutions Center Equipment Module Configuration Task List
Task Chapter Reference
Give Cisco Provisioning Center permissions to the Cisco VPN Solution Center CORBA servers
Chapter 1, “Getting Started”
Establish a naming convention Chapter 1, “Getting Started”
Configure the name resolution Chapter 1, “Getting Started”
Perform the initial system upload Chapter 2, “Uploading Fabric and Services”
Re-upload (if any configuration information has changed)
Chapter 2, “Uploading Fabric and Services”
Create internetworking links (if necessary)
“Common Tasks” chapter in the CPC User’s Guide.
1-2Cisco VPN Solutions Center Equipment Module Configuration Guide
OL-1816-02
Chapter 1 Getting StartedConfiguration
This Equipment Module works with the IP VPN (VPI) Service Application to create IP VPN services. Existing fabric and service elements are uploaded using this Equipment Module.
Creating, modifying and deleting fabric and service elements should be done through the IP VPN Service Application. For more information on IP VPN services, refer to the IP VPN Service Application Solutions Guide.
Software RequirementsThe Cisco VPN Solutions Center Equipment Module requires Cisco IOS in the PE and CE routers. This Equipment Module supports Cisco routers with the IOS requirements listed in Table 1-2.
The Equipment Module communicates with the Cisco VPN Solution Center software via the CORBA interface. The software requirements are highlighted in Table 1-2 below.
License KeysA number of license keys have been introduced in Cisco VPN Solution Center version 2.0. Two of these keys affect how Cisco Provisioning Center interfaces with Cisco VPN Solution Center EM. Each installation of Cisco VPN Solution Center EM is licensed for a pre-determined number of edge routers. Additionally, an API (Tools) license is required in order to allow Cisco Provisioning Center to interface with Cisco VPN Solution Center EM.
Table 1-2 Software Requirements
Vendor Product Version Notes
Cisco Cisco VPN Solution Center: MPLS Solution
1.2,1Patch Level 1.2.1.3
2.0 Patch Level 2.0.0.9
Cisco Provisioning Center supports these versions of Cisco VPN Solution Center to provision IP VPN services.
If you are using VPN SC 2.0, you must have the correct license keys for your installation.
MPLS PE Routers
Cisco Internet Operating System (IOS)
12.0(5)T or later with the Service Provider feature set.
12.1(2)T or later T releases, except 12.1(4)T recommended
Cisco VPN Solution Center requires this IOS version (or greater) in the MPLS PE routers.
For Inter-Switch Link (ISL) between the PE and CE, the Enterprise feature set is required
CE Routers
Cisco Internet Operating System (IOS)
11.1 or later Cisco VPN Solution Center requires this IOS version (or greater) in the CE routers.
In order to have Service Assurance Agent support, 12.0(5) T or later, with the IP feature set (I-train) is required.
Cisco IP Manager 2.0 Cisco VPN Solution Center must be compatible with this release.
1-3Cisco VPN Solutions Center Equipment Module Configuration Guide
OL-1816-02
Chapter 1 Getting StartedGiving Cisco Provisioning Center Permissions to the Cisco VPN Solution Center CORBA Servers
Refer to the documentation provided with Cisco VPN Solution Center to obtain more information and install these licenses.
Giving Cisco Provisioning Center Permissions to the Cisco VPN Solution Center CORBA Servers
You must give Cisco Provisioning Center permissions to the Cisco VPN Solution Center CORBA Servers:
Step 1 Log on to the machine running the Cisco VPN Solution Center Server as the VPN administrator.
Step 2 Navigate to the vpn directory by entering:
cd $HOME_DIR/vpn
where $HOME_DIR is the administrator’s home directory.
Step 3 Source the environment for your shell:
C Shell: source setenv.csh
Korn Shell: ../setenv.sh
Step 4 Give Cisco Provisioning Center invocation rights for the Cisco VPN Solution Center CORBA servers by executing the Orbix commands:
chmodit i+all CVPIMServerchmodit i+all VpnInvServerchmodit i+all TaskServer
Step 5 You must also configure Cisco Provisioning Center’s version of Orbix to communicate with VPN SC. Ensure that you have sourced the Cisco Provisioning Center environment:
cd /<path>/server. mng/utility/syccpovdef
Step 6 Stop CORBA and the Cisco Provisioning Center server.
SYcorba -hSYnpt -h
Step 7 On your Cisco Provisioning Center installation navigate to the following directory:
cd $CCP_REL/sys/corba/config/
Step 8 Add the following line to orbix3.cfg:
Orbix.IT_IIOP_VERSION="10";
Step 9 Restart CORBA and the Cisco Provisioning Center server.
SYcorba -sSYnpt -sS
1-4Cisco VPN Solutions Center Equipment Module Configuration Guide
OL-1816-02
Chapter 1 Getting StartedConfiguring Name Resolution
Configuring Name Resolution The domain attribute of the routers refers to a DNS domain. The combination of hostname.domainname must be unique across one VPNSC network. The network attribute of the routers is only used to group targets in the IP Manager (PEs and CEs).
The Cisco VPN Solution Center provides the router name and domain name to the Cisco IP Manager. The Cisco IP manager uses name resolution to find the IP addresses of the PE and CE routers. You must configure your Cisco IP Manager host to support name resolution, so that it is able to resolve the IP address of a router for its host name and domain name.
Task LogsThe Cisco VPN Solutions Center Equipment Module will normally delete the task logs from the VPN SC installation. If you need to retain these logs for debugging purposes, you can configure Cisco Provisioning Center to retain these logs.
Step 1 On the Cisco Provisioning Center Server host, in a sourced environment, edit the Cisco Provisioning Center configuration file.
cd $CCP_CONFIGvi syavconfig.siteCVNIF.DontDeleteTasks = ON
Step 2 Save your changes and if Cisco Provisioning Center is running, force it to re-read the syavconfig.site file.
SYnpt -r
Note If you enable this feature, you must manually clear the task logs at regular intervals.
Cisco VPN Solution Center Repository Cleanup Utility VPN Solutions Center Release 1.1, 1.2 and 2.0 prevent you from creating SRVCs on an interface (sub-interface for ATM and Frame Relay) that is already referenced by another SRVC (in any SRVC state and SRVC type) in the Cisco VPN Solution Center Repository. You will be blocked if you have an invalid SRVC that is referencing an interface that you want to use for another SRVC. Therefore, you should run the Repository Cleanup utility prior to an initial upload to clean out the repository.
You can clean the Cisco VPN Solution Center Repository via the Cisco VPN Solution Center GUI. If this does not work, you can then use the Repository Cleanup utility to purge all the SRVCs in the Cisco VPN Solution Center Repository that can be safely deleted. The following table lists the types and states that the Repository Cleanup utility removes.
Table 1-3 SRVC Types and States that the Repository Cleanup Utility purges
SRVC Type SRVC States
Add Requested
1-5Cisco VPN Solutions Center Equipment Module Configuration Guide
OL-1816-02
Chapter 1 Getting StartedCisco VPN Solution Center Repository Cleanup Utility
Note SRVCs that cannot be removed will be logged. These SRVCs will not be uploaded. You must then look at each of the SRVCs in the log file and determine whether or not to remove or retain them.
The Repository Cleanup utility must be executed in sourced Cisco Provisioning Center Server environment. The following steps describe how to run the Repository Cleanup utility:
Step 1 Execute the following command, where server_host is the Cisco VPN Solution Center server’s host name. You can specify a log file name and path.
clean_Repository_1.2 server_host [log file]
or
clean_Repository_2.0 server_host [log file]
Step 2 If no filename and path are specified, the file is written to the default location. The log file for this utility will be placed in the /tmp directory and will be named:
/tmp/cleanrepository.log
Add Invalid
Delete Pending
Table 1-3 SRVC Types and States that the Repository Cleanup Utility purges
SRVC Type SRVC States
1-6Cisco VPN Solutions Center Equipment Module Configuration Guide
OL-1816-02
Cisco VPN Solutions CenterOL-1816-02
C H A P T E R 2
Uploading Fabric and ServicesThis chapter provides information about Cisco VPN Solutions Center Equipment Module support for uploading fabric and service elements.
The Cisco VPN Solutions Center Equipment Module allows you to combine different types of upload.Two upload methods are available:
• Initial or Full upload—Initial upload uses the VPN Network's “Upload Fabric and Services” option. In this case the whole network is uploaded including fabric and service objects.
• Incremental or Delta upload—Incremental upload uses the VPN Network's “Upload Fabric” feature and Customer's “Upload Services” feature or CE Router “Upload Services”. In this case only newly modified Customers or CE Routers are uploaded.
Initial System Upload To provision services, the Cisco Provisioning Center database must have detailed knowledge of the managed subnetworks. Using a procedure called upload, objects are created within the Cisco Provisioning Center database that represent objects of the managed network in the Cisco VPN Solution Center. Objects are uploaded from the Cisco VPN Solution Center, not the actual equipment.
The initial system upload consists of a four steps:
1. Create a VPNNetwork
2. From the VPNNetwork, upload Provider Admin Domains, Regions, PEs and Customers, Sites and CEs. You will also discover CoSs, CoS Classes, Address Pools, VPNs and CERCs.
3. From the VPNNetwork, upload Provider Admin Domains, Regions, PEs and Customers, Sites and CEs. You will also discover CoSs, CoS Classes, Address Pools, VPNs and CERCs, SRVCs.
4. From the Customer, upload all SRVCs and all related information: CERCMemberships, Routes, Redistributed Protocols.
Note The term upload does not refer to the creation of inter-network links because they are outside the scope of any single Equipment Module. See the CPC User’s Guide regarding inter-network links.
Cisco Provisioning Center supports the following types of upload, given a network object:
• Upload the fabric elements.
• Upload the fabric and service elements.
2-1 Equipment Module Configuration Guide
Chapter 2 Uploading Fabric and ServicesUploading Fabric and Service Element
• Audit new Service Requests in the Cisco VPN Solution Center and upload the fabric and service elements.
• Audit existing Service Requests in the Cisco VPN Solution Center and upload the fabric and service elements.
• Audit all Service Requests in the Cisco VPN Solution Center and upload the fabric and service elements.
• Collect new VPN routing information and use it while auditing new Service Requests in the Cisco VPN Solution Center. Then upload fabric and service elements into Cisco Provisioning Center.
• Collect existing VPN routing information and use it while auditing existing Service Requests in the Cisco VPN Solution Center. Then upload fabric and service elements into Cisco Provisioning Center.
• Collect all VPN routing information and use it while auditing all Service Requests in the Cisco VPN Solution Center. Then upload fabric and service elements into Cisco Provisioning Center.
Also, given a customer or CE router object, you can upload the services only, as required.
Uploading Fabric and Service ElementDuring upload, all network elements that reside on a single VPN SC server are uploaded. Performing an network fabric upload, will upload the following object classes:
Performing an network upload of fabric and services will upload the following additional object classes:
Performing a Customer upload of services only will upload the following object classes that belong to the Customer instance:
• Provider Administrative Domain • CoS Class
• Region of PAD • PE Router
• IP Address Pool • CE Router
• Customer • VPN
• Customer Site, • CERC
• CoS Profile
• Advertised Routes • Provisioned Physical Port1
1. Physical ports and logical ports are uploaded only if SRVCs exist on them. Physical ports and logical ports created via the Cisco Provisioning Center IP VPN Service Application will be lost during upload if no SRVCs exist on them.
• CERC Membership • Redistributed Protocols
• Provisioned ATM Logical Ports • Secondary Cable Addresses
• Provisioned FR Logical Ports • VPN SC Templates.
• Provisioned Standard Logical Ports • SRVC,
• Advertised Routes • Provisioned Physical Port1
• CERC Membership • Redistributed Protocols
2-2Cisco VPN Solutions Center Equipment Module Configuration Guide
OL-1816-02
Chapter 2 Uploading Fabric and ServicesUploading Fabric and Service Element
Performing a CE Router upload of services only will upload the following object classes that belong to the CE Router instance:
Valid States for Service UploadA Service Request VPN Configuration (SRVC) represents a PE-CE link provisioning request. You can upload SRVCs into the Cisco Provisioning Center database as service elements. Only SRVCs that represent the creation of a VPN service or the modification of an existing VPN service are uploaded. In addition, only SRVCs in the following states are uploaded:
• Pending—Service Requests in the Pending state have generated configlets and are awaiting deployment.
• Deployed—Service Requests enter the Deployed state when configlet commands are verified. Configlets are verified on the router configuration file.
• Functional—Service Requests are moved to the Functional state when the routing and forwarding tables are found for the Service and these correspond to the service intent.
• Failed Deploy—Service Requests are moved to the Failed Deploy state if Cisco IP Manager detects an error during deployment.
• Lost—Service Requests are moved to the Lost state when a configuration level verification of intent cannot be found in the router configuration files. Service Requests can only enter this state if they have been either Deployed or Functional. This state is the opposite of Deployed.
• Broken—Service Requests are moved to the Broken State if the routing and forwarding tables that are found do not match the service intent. This state is the opposite of Functional.
• Failed Audit—This state indicates that the Service Request had not successfully passed an audit, and has not moved to the Functional or Deployed state. The Failed Audit state is initiated from the pending state.
These are the only valid states for upload because the deployment of these SRVCs modifies the PE and CE routers. The Failed Deploy, Lost, and Broken states are failure states, indicating that the new configuration of the routers or the new routing tables do not match with the Cisco VPN Solution Center definition of the VPN service.
SRVCs in the Requested and Invalid states are not uploaded because the deployment of these SRVCs does not modify the routers.
• Provisioned ATM Logical Ports • Secondary Cable Addresses
• Provisioned FR Logical Ports • VPN SC Templates.
• Provisioned Standard Logical Ports • SRVC,
1. Physical ports and logical ports are uploaded only if SRVCs exist on them. Physical ports and logical ports created via the Cisco Provisioning Center IP VPN Service Application will be lost during upload if no SRVCs exist on them.
• Advertised Routes • Physical Port
• CERC Membership • Redistributed Protocols
• ATM Logical Ports • Secondary Cable Addresses
• FR Logical Ports • VPN SC Templates.
• Standard Logical Ports • SRVC,
2-3Cisco VPN Solutions Center Equipment Module Configuration Guide
OL-1816-02
Chapter 2 Uploading Fabric and ServicesUploading Fabric and Service Element
Note The upload function will not execute if other Transactions are open at the time of upload. All Transactions must be in the applied or abandoned states for upload to proceed. Active Transactions create pending versions of objects and running an upload could invalidate these objects. For more information on transaction handling refer to the CPC User’s Guide.
You must create a network object to perform an Upload. You must create one network object for each Cisco VPN Solution Center installation. For more information on creating network objects, refer to the IP VPN Service Application Solution Guide.
Uploading Fabric Elements for a Network ObjectWhen you first create a network object, you may want to upload just the fabric elements consisting of physical ports and logical ports.
Complete the following steps to upload the fabric elements:
Step 1 Navigate to networks > Cisco VPN Solutions Center Equipment Module > Elements > Network.
The Content Area displays the Lister View for Node.
Step 2 Click the Get List button on the Action bar.
Optionally, use the field filters to narrow your selection before you click the Get List button. If you do not specify any criteria, the system will retrieve all of the objects that belong to the element you selected.
Step 3 Check the box in the Select column next to the network you want to upload from.
Step 4 Click the Upload button on the Action Bar.
Step 5 Select the Net_Fabric from the pull-down menu in the Content Area.
Step 6 Click the Perform Upload button to initiate the upload.
The Content page tells you that the upload has started.
Step 7 To monitor the upload progress, click the hyperlink in the Content Area.
Uploading Fabric and Service Elements for a Network Object You can upload all of the fabric and service elements for a network object if there are existing elements in the Cisco VPN Solution Center. Physical ports and logical ports are uploaded if they are being used by an SRVC. Complete the following steps to upload the Fabric and Service elements:
Step 1 Navigate to networks > Cisco VPN Solutions Center Equipment Module > Elements > Network.
The Content Area displays the Lister View for Node.
Step 2 Click the Get List button on the Action bar.
Optionally, use the field filters to narrow your selection before you click the Get List button. If you do not specify any criteria, the system will retrieve all of the objects that belong to the element you selected.
Step 3 Check the box in the Select column next to the network you want to upload from.
Step 4 Click the Upload button on the Action Bar.
2-4Cisco VPN Solutions Center Equipment Module Configuration Guide
OL-1816-02
Chapter 2 Uploading Fabric and ServicesUploading Fabric and Service Element
Step 5 Select Net_Fabric_Serv from the pulldown menu in the Content Area.
Step 6 Click the Perform Upload button to initiate the upload. The Content page tells you that the upload has started.
Step 7 To monitor the upload progress, click the hyperlink in the Content Area.
Step 8 To verify that your upload has succeeded, navigate to administration > Transaction > Upload Transactions.
Step 9 Click the Get List button. A list of upload requests will be displayed. You can check the status of your upload.
Step 10 If the upload failed, select your upload request and click on the Log button to view the audit log for more information.
Uploading Services From a Customer Object The scope of this upload is all network elements which belong to the Customer.
You can upload Services from a customer object after modifying an SRVC from the Cisco VPN Solution Center GUI (for example, changing the routing protocol). Services can be uploaded from those customers that are affected by the modifications. This procedure uploads: Provisioned Physical Port, Provisioned ATM, FR, Standard Logical ports, SRVCs, CERC Memberships, Advertised Routes, and Redistributed Protocols (Static, RIPv2, BGP, OSPF) Secondary Addresses for the Cable Services and VPNSC Templates from the customer object.
Step 1 Navigate to networks > Cisco VPN Solutions Center Equipment Module > Elements > Customer.
Step 2 Click the Get List button on the Action bar.
Optionally, use the field filters to narrow your selection before you click the Get List button. If you do not specify any criteria, the system will retrieve all of the objects that belong to the element you selected.
Step 3 Check the box in the Select column next to the customer you want to upload from.
Step 4 Click the Upload button on the Action Bar.
Step 5 Select Customer_Serv from the pulldown menu.
Step 6 Click the Perform Upload button to initiate the upload.
The Content page tells you that the upload has started.
Step 7 To monitor the upload progress, click the hyperlink in the Content Area.
Uploading Services From a CE Router Object You can upload Services from a CE router object after modifying an SRVC from the Cisco VPN Solution Center GUI. Services can be uploaded from those CE routers that are affected by the modifications. This procedure uploads Physical Port, ATM, FR, Standard Logical ports, SRVCs, CERC Memberships, Advertised Routes, and Redistributed Protocols (Static, RIPv2, BGP, OSPF), Secondary Addresses for the Cable Services, and VPN SC Templates from the CE Router object.
2-5Cisco VPN Solutions Center Equipment Module Configuration Guide
OL-1816-02
Chapter 2 Uploading Fabric and ServicesUploading Fabric and Service Element
Step 1 Navigate to networks > Cisco VPN Solutions Center Equipment Module > Elements > CE Router.
Step 2 Click the Get List button on the Action bar.
Optionally, use the field filters to narrow your selection before you click the Get List button. If you do not specify any criteria, the system will retrieve all of the objects that belong to the element you selected.
Step 3 Check the box in the Select column next to the customer you want to upload from.
Step 4 Click the Upload button on the Action Bar.
Step 5 Select Router_Serv from the pulldown menu.
Step 6 Click the Perform Upload button to initiate the upload.
The Content page tells you that the upload has started.
Step 7 To monitor the upload progress, click the hyperlink in the Content Area.
Incremental Upload
Incremental upload uses VPN Network's “Upload Fabric” option and CE Router's “Upload Services” upload option. The Cisco utility JournalReader reads and analyses the VPNSC journal log files and creates lists of modified CE routers. The lists are read by the Cisco VPN Solutions Center Equipment Module upload script and only newly modified CE routers are uploaded.
The feature is implemented in VPNSC 1.2.1 only.
Viewing the Upload Progress
Monitoring Upload Progress
During an upload process, you can view the progress of the upload request. To view a log of the running upload process, complete the following steps:
Step 1 Navigate to administration > Monitoring > Uploads.
The Content area displays the Monitoring Upload Transactions Lister View. Initially, there are no transactions listed.
Step 2 Click the Start Monitoring button to start monitoring upload transactions.
Change the refresh interval time by keying in the number of seconds to refresh the screen.
Note Monitoring must be turned off if you want to change the refresh interval time.
Viewing the Upload Log
To view the log of a monitored upload transaction, use the following procedure:
2-6Cisco VPN Solutions Center Equipment Module Configuration Guide
OL-1816-02
Chapter 2 Uploading Fabric and ServicesService Request Audits
Step 1 In the Monitoring Upload Transaction Lister View, check the box in the Select column next to the transaction that you want to operate on.
Note You can operate on only one Transaction at a time.
Step 2 Click the Log Info button in the Action Bar.
Step 3 A snapshot of the Upload Transaction Log displays.
Service Request AuditsWhen you initiate VPN Solutions Center service request audit, the audit tests each link the VPN. The service request is promoted to the deployed state only when all of the links have passed the audit.
The auditing utility monitors and reports the current state of a VPN service request over its lifetime. The lifetime of a VPN service request spans the Requested state to the Closed state. The auditing utility saves the transition state (if any) to the VPN Inventory Repository.
The following procedures apply to versions 1.2 of VPN SC. If you are using version 2.0, new and existing SRVCs are treated in the same way. Cisco VPN Solutions Center Equipment Module will audit all new and existing SRVCs in the abandoned, deployed and functional states. If you are using version 2.0, use the procedure outlined in “Auditing All Service Requests Before Upload” section on page 2-8.
Auditing New Service Requests Before Upload You can run an audit on new Service Requests (SRVCs) created in the Cisco VPN Solution Center, then upload all of the fabric and service elements for a network into Cisco Provisioning Center. For more information on auditing, refer to the Cisco VPN Solution Center: MPLS Solution User Guide for your release. Complete the following steps to audit new SRVCs and upload fabric and service elements.
Step 1 Navigate to networks > Cisco VPN Solutions Center Equipment Module > Elements > Network.
Step 2 Click the Get List button on the Action bar.
Step 3 Check the box in the Select column next to the network you want to audit.
Step 4 Click the Upload button on the Action Bar.
Step 5 Select Audit_New from the pulldown menu.
Step 6 Click the Perform Upload button to initiate the upload. The Content page tells you that the upload has started.
2-7Cisco VPN Solutions Center Equipment Module Configuration Guide
OL-1816-02
Chapter 2 Uploading Fabric and ServicesService Request Audits
Auditing Existing Service Requests Before Upload You can run an audit on existing Service Requests (SRVCs) in the Cisco VPN Solution Center, then upload all of the fabric and service elements for a network into Cisco Provisioning Center. For more information on auditing, refer to the Cisco VPN Solution Center: MPLS Solution User Guide for your release. Complete the following steps to audit existing SRVCs and upload fabric and service elements:
Step 1 Navigate to networks > Cisco VPN Solutions Center Equipment Module > Elements > Network.
Step 2 Click the Get List button on the Action bar.
Step 3 Check the box in the Select column next to the network you want to audit.
Step 4 Click the Upload button on the Action Bar.
Step 5 Select Audit_Exist from the pulldown menu.
Step 6 Click the Perform Upload button to initiate the upload. The Content page tells you that the upload has started.
Auditing All Service Requests Before Upload You can run an audit on all Service Requests (SRVCs) in the Cisco VPN Solution Center, then upload all of the fabric and service elements for a network into Cisco Provisioning Center. For more information on auditing, refer to the Cisco VPN Solution Center: MPLS Solution User Guide for your release. Complete the following steps to audit all SRVCs and upload fabric and service elements:
Step 1 Navigate to networks > Cisco VPN Solutions Center Equipment Module > Elements > Network.
Step 2 Click the Get List button on the Action bar.
Step 3 Check the box in the Select column next to the network you want to audit.
Step 4 Click the Upload button on the Action Bar.
Step 5 Select Audit_All from the pulldown menu.
Step 6 Click the Perform Upload button to initiate the upload. The Content page tells you that the upload has started.
Collecting New VPN Routing Information and Auditing New Service Requests Before Upload
You can collect new VPN routing information and audit new Service Requests (SRVCs) created in the Cisco VPN Solution Center, then upload all of the fabric and service elements for a network into Cisco Provisioning Center. For more information on collecting VPN routing information and auditing, refer to the Cisco VPN Solution Center: MPLS Solution User Guide for your release. Complete the following steps to collect new VPN routing information audit new SRVCs and upload fabric and service elements:
Step 1 Navigate to networks > Cisco VPN Solutions Center Equipment Module > Elements > Network.
2-8Cisco VPN Solutions Center Equipment Module Configuration Guide
OL-1816-02
Chapter 2 Uploading Fabric and ServicesService Request Audits
Step 2 Click the Get List button on the Action bar.
Step 3 Check the box in the Select column next to the network you want to audit.
Step 4 Click the Upload button on the Action Bar.
Step 5 Select Audit_Rout_New from the pulldown menu.
Step 6 Click the Perform Upload button to initiate the upload. The Content page tells you that the upload has started.
Collecting Existing VPN Routing Information and Auditing Existing Service Requests Before Upload
You can collect existing VPN routing information and audit existing Service Requests (SRVCs) created in the Cisco VPN Solution Center, then upload all of the fabric and service elements for a network into Cisco Provisioning Center. For more information on collecting VPN routing information and auditing, refer to the Cisco VPN Solution Center: MPLS Solution User Guide for your release. Complete the following steps to collect existing VPN routing information, audit existing SRVCs and upload fabric and service elements:
Step 1 Navigate to networks > Cisco VPN Solutions Center Equipment Module > Elements > Network.
Step 2 Click the Get List button on the Action bar.
Step 3 Check the box in the Select column next to the network you want to audit.
Step 4 Click the Upload button on the Action Bar.
Step 5 Select Audit_Rout_Exist from the pulldown menu.
Step 6 Click the Perform Upload button to initiate the upload. The Content page tells you that the upload has started.
Collecting VPN Routing Information and Auditing All Service Requests Before Upload
You can collect VPN routing information and audit all Service Requests (SRVCs) created in the Cisco VPN Solution Center, then upload all of the fabric and service elements for a network into Cisco Provisioning Center. For more information on collecting VPN routing information and auditing, refer to the Cisco VPN Solution Center: MPLS Solution User Guide for your release. Complete the following steps to collect VPN routing information audit all SRVCs and upload fabric and service elements:
Step 1 Navigate to networks > Cisco VPN Solutions Center Equipment Module > Elements > Network.
Step 2 Click the Get List button on the Action bar.
Step 3 Check the box in the Select column next to the network you want to audit.
Step 4 Click the Upload button on the Action Bar.
Step 5 Select Audit_Rout_All from the pulldown menu.
2-9Cisco VPN Solutions Center Equipment Module Configuration Guide
OL-1816-02
Chapter 2 Uploading Fabric and ServicesRe-Upload
Step 6 Click the Perform Upload button to initiate the upload. The Content page tells you that the upload has started.
Re-Upload If there are any changes in the Cisco VPN Solution Center, you must re-upload to keep the Cisco Provisioning Center database current with the Cisco VPN Solution Center. You should re-upload after any of the following:
• You must recover from a failure situation (to synchronize the Cisco Provisioning Center database with the Cisco VPN Solution Center).
• You have run an audit from the Cisco VPN Solution Center and want to reflect any state changes in Cisco Provisioning Center.
• Fabric or service elements not created by Cisco Provisioning Center (both for initial population of the database and also for co-existence with other provisioning products) are added to the Cisco VPN Solution Center repository.
• Fabric or service elements not modified/deleted by Cisco Provisioning Center are modified/deleted in the Cisco VPN Solution Center repository.
To re-upload you need to upload fabric and service elements from the network object or from a specific customer object. For more information, refer to “Initial System Upload” section on page 2-1.
2-10Cisco VPN Solutions Center Equipment Module Configuration Guide
OL-1816-02
Cisco VPN Solutions CenterOL-1816-02
C H A P T E R 3
Working with Profiles and TemplatesThis chapter contains information about creating Service Element profiles for frequently used service elements.
Cisco Provisioning Center maps Cisco VPN Solution Center router interfaces to physical and logical ports. Attributes exist within the logical ports that are not available in the Cisco VPN Solution Center, but that need to be set in order to create Layer 2 connectivity for IP VPN services. These attributes are Bandwidth and Committed Bandwidth Nominal Threshold for incoming and outgoing traffic on the logical ports.
During upload, these values are set to the default values within the Default Logical Port Profiles. The following default logical port profiles are available:
• Cisco VPN ATM Logical Port Profile
• Cisco VPN Frame Relay Logical Port Profile
• Cisco VPN LPort Profile
You can modify the values in these profiles to customize the default Bandwidth and Committed Bandwidth Nominal Threshold values.
Working with Profiles Service element profiles provide you with access to the Cisco VPN Solution Center-specific attributes for a particular Service. A corresponding Service element profile exists for each Service type supported. Default profiles provide the initial (default) attribute values for the corresponding object class whenever such a new object is created.
For a given Service element, more than one profile may be defined. For example, there may be a Frame Relay PVC Profile for each class of Service (CoS), “Gold,” “Silver,” and “Bronze.” For a given object, only one Service element profile may be associated at any one time.
Because profiles themselves are objects that you can create and modify, they provide a means to store and name commonly used sets of attributes and provide a reliable shorthand method of configuring any number of new objects. A profile has most of the same attributes as the corresponding object class. Some attributes of the object class are not included in the profile because they are expected to be unique for each object. Similarly, an object's name is not a profile attribute.
The attributes of a profile are referred to as initial value attributes because they are used to assign the initial values to the corresponding object. Once a new object has been created based on a profile, changes to profile attribute values do not cause any changes to the corresponding object. The only time the profile attributes affect the object is when you create a new object or when you reassign an existing object to the same or different profile.
3-1 Equipment Module Configuration Guide
Chapter 3 Working with Profiles and TemplatesWorking with Profiles
If you provide values for these attributes and also provide values in other places when you are creating a Service (either during Service creation or in a Service object profile) the threader will override the values based on the following scale of priorities:
1. Service Object View—All information provided in Service object View is used by Cisco Provisioning Center.
2. Service Object Profile—Cisco Provisioning Center will only use the information provided in the Service object profile for values that are either not available or not specified in the Service object Subset Viewer.
3. Service Element Profile—Cisco Provisioning Center uses values from the Service element profile for all attributes that are not present or not specified in the Service object profile or on Service object Subset Viewer.
Creating a Default Logical Port Profile To create a logical port profile, complete the following steps:
Step 1 Navigate to networks > Cisco VPN Solution Center Equipment Module > Profiles > Logical Port Profile.
where Logical Port Profile is LPort, ATM Logical Port, or Frame Relay Logical Port
Step 2 Click the Create button on the Action Bar.
Step 3 Enter a name for your profile and then enter the desired attribute values that you want to include in your profile. You can also set the mode for attributes that are significant to your services. An additional attribute on the profile's provisioning page allows you to set an attribute to Read-Only or Read-Write. For information about the attributes, refer to Table A-31.
Step 4 Click the save or apply now button to save or apply the new profile.
Modifying a Logical Port Profile To modify a logical port profile, complete the following steps:
Step 1 Navigate to networks > Cisco VPN Solution Center Equipment Module > Profiles > Logical Port Profile.
where Logical Port Profile is LPort, ATM Logical Port, or Frame Relay Logical Port
Step 2 Click the Modify button on the Action Bar.
Step 3 Modify the attribute(s) that you want to change. For information about the attributes, refer to Table A-31.
Step 4 Click the save or apply now button to save or apply the profile.
3-2Cisco VPN Solutions Center Equipment Module Configuration Guide
OL-1816-02
Chapter 3 Working with Profiles and TemplatesWorking with Custom Templates
Deleting a Logical Port Profile To delete a logical port profile, complete the following steps:
Step 1 Navigate to networks > Cisco VPN Solution Center Equipment Module > Profiles > Logical Port Profile.
where Logical Port Profile is LPort, ATM Logical Port, or Frame Relay Logical Port
Step 2 Click the Delete button on the Action Bar.
Step 3 Click the apply now button to delete the profile.
Cisco VPN Logical Port Profile AttributesThe Cisco VPN logical port profile allows you to configure attributes for a Cisco VPN interface that is uploaded from the Cisco VPN Solution Center. Table A-31 lists configurable attributes for the Cisco VPN logical port profile.
Working with Custom Templates Custom templates can be created and used during SRVC creation. Templates are text files that contain a set of IOS commands. These commands are appended to the major interface commands or to the end of the configuration file generated by the Cisco VPN Solution Center when an SRVC is created.
VPNSC versions 1.2 and 1.2.1 support only templates that are created in free format. In this documentation this type is called a free form templates.
VPNSC version 2.0 also supports a new type of template generated by the VPNSC Template Manager. In this documentation this second template type is referred to as a “VPNSC Template”.
Free Form TemplatesThe templates are IOS commands that are appended to the major interface file or to the end of the configlet generated by VPN SC. You can define four templates for each SRVC:
• PE interface template
• PE template
• CE interface template
• CE template
Template Structure
Each template file contains two sections: APPLY and REMOVE. The APPLY section is mandatory and it must be at the beginning of the template file. The REMOVE section is optional. The APPLY section contains a set of IOS commands that will be used during SRVC creation.
3-3Cisco VPN Solutions Center Equipment Module Configuration Guide
OL-1816-02
Chapter 3 Working with Profiles and TemplatesWorking with Custom Templates
The REMOVE section contains a set of IOS commands that will be applied when the SRVC is deleted or when the template is changed. Figure 3-1 illustrates the layout of a template for an SRVC.
Figure 3-1 Sample PE Router Template
Templates that are created through the VPN SC GUI (not though Cisco Provisioning Center) are uploaded with their related SRVCs. In this case the template will have an apply section and will not have a remove section.
Template files can contain references to Cisco Provisioning Center attributes. Expressions of the form [getValue attributename] will be replaced by their actual values at the time the SRVC is first delivered.
A template is delivered to VPN SC only when its name within the SRVC changes.
Saving Free Form Templates
All working template files reside in the $CCP_DATA/CV/templates/networkName directory on the Cisco Provisioning Center server. When SRVCs are created or modified within Cisco Provisioning Center, the server will search this directory for the template files that are specified in the SRVC object. You can name your template files to reflect the type of template, since the actual content of the template file does not reveal this information.
During SRVC creation/modification, you can specify the template filenames within the SRVC object. Newly created SRVCs and modified SRVCs whose template names have been changed will be delivered to the Cisco VPN Solution Center.
Note Changing the contents of a template without changing the template name in the SRVC will have no effect.
The templates stored in the $CCP_DATA/CV/templates/networkName directory are one of two types: uploaded template files or translated prototemplates.
Templates from the Cisco VPN Solution Center
Templates created via the Cisco VPN Solution Center GUI are uploaded with their related SRVCs. These template files are created and stored in the following directory on the Cisco Provisioning Center server:
$CCP_DATA/CV/templates/networkName
These files are named as follows:
• SRVC_IDPeTemplate
• SRVC_IDPeInterfaceTemplate
• SRVC_IDCeTemplate
• SRVC_IDCeInterfaceTemplate
APPLY:Address-family ipv4 vrf xxx (vrf name)No redistribute connectedNo redistribute static metric 1no auto-summaryno synchronization
3-4Cisco VPN Solutions Center Equipment Module Configuration Guide
OL-1816-02
Chapter 3 Working with Profiles and TemplatesWorking with Custom Templates
These templates have an APPLY section and do not have a REMOVE section.
Prototemplates from Cisco Provisioning Center
To create templates within Cisco Provisioning Center, you must manually create the text IOS command files, and store the files in a specific location. You must then specify the name of the file during SRVC creation or modification. The manually created template files are referred to as prototemplates.
Prototemplates are used to configure CE interface and PE interface templates as well as the CE and PE templates. Unlike templates, prototemplates are translated by the Cisco VPN Solution Center Equipment Module and can include calls to SRVC attributes.
Initial prototemplates are stored in following directory on the Cisco Provisioning Center server.
$CCP_DATA/CV/prototemplates
Prototemplates are translated and copied to the $CCP_DATA/CV/templates/networkName directory on the Cisco Provisioning Center Server. These translated prototemplate files are named as follows:
• templateName.SRVC_ID
Where SRVC_ID is the name of the SRVC within Cisco Provisioning Center and templateName is the name of the prototemplate file. The SRVC name is used to associate the translated prototemplate file with the SRVC.
When a template filename is specified in the SRVC object within Cisco Provisioning Center, the Cisco VPN Solution Center Equipment Module search proceeds in the following manner:
Step 1 Search for $CCP_DATA/CV/templates/networkName/filename
find $CCP_DATA/CV/templates -name filename
Step 2 If the template file is not found in the above location, search for $CCP_DATA/CV/templates/networkName/filename.SRVC_ID
find $CCP_DATA/CV/templates/networkName -name filename.SRVC_ID
Step 3 If the template file is not found in the above locations, search for $CCP_DATA/CV/prototemplates/filename
find $CCP_DATA/CV/templates/networkName -name filename.SRVC_ID
Step 4 This search will stop at the first instance of the specified file. You can make reference to the SRVC object within Cisco Provisioning Center by making getValue calls. For example, instead of specifying the VPI/VCI values for a PVC, the template could call:
pvc [getValue raa_vpi]\[getValue raa_vci]
The getValue command is executed (translated) when you create the SRVC. The actual values are retrieved and inserted into the template and this template is then written to the following directory:
$CCP_DATA/CV/templates/networkName/filename
Note If you require values for other object attributes, you must use dotted notation. The characters $ [ “ \ must be preceded by a backslash (\).
Figure 3-2 shows an example of a PE interface prototemplate using the getValue call.
3-5Cisco VPN Solutions Center Equipment Module Configuration Guide
OL-1816-02
Chapter 3 Working with Profiles and TemplatesWorking with Custom Templates
Figure 3-2 Sample PE Interface Prototemplate
Template Behavior During SRVC Creation
During a rollforward (creation/modification) operation, the APPLY section of each template file is delivered to Cisco VPN Solution Center.
During a rollback operation (modification/deletion) the REMOVE section of each template file is delivered and implemented by the Cisco VPN Solution Center. The REMOVE section should attempt to remove the changes made in rollforward.
Template Behavior During SRVC Modification
During a rollforward operation, if no previous version of the template file exists, the APPLY section of the current template file is appended to the configuration file generated by Cisco VPN Solution Center. If a previous version of the template file exists, the REMOVE section of the previous template file is appended first, followed by the APPLY section of the new template file.
During a rollback operation, the REMOVE section of the current template file is appended first, followed by the APPLY section of the previous template file. This restores the router to the configuration that existed prior to the SRVC modification. If there was no existing version of the template file, the REMOVE section of the current template file is appended.
Template Behavior During SRVC Deletion
During an SRVC deletion, if there are template files for the SRVC, the REMOVE section of the templates will be delivered to the Cisco VPN Solution Center.
Template Maintenance
Cisco Provisioning Center manages the $CCP_DATA/CV/template/networkName directory. Cisco Provisioning Center removes unused template files depending on the state of the Transaction. The behavior of template management is as follows:
• If a Transaction is applied and successful, the template files are deleted if an SRVC deletion was performed. If an SRVC modification is performed, the previous version of the template file is deleted.
• If a Transaction is applied and rejected, the template files are deleted if an SRVC creation was attempted. If an SRVC modification is performed, the old version of the template file is deleted.
APPLY:no ip unreachablesno ip mroute-cache
pvc [getValue raa_vpi]\[getValue raa_vci]oam-pvc manage
REMOVE:
3-6Cisco VPN Solutions Center Equipment Module Configuration Guide
OL-1816-02
Chapter 3 Working with Profiles and TemplatesWorking with Custom Templates
Note When a change request commits or is rejected, the old/new template files will be deleted. If a new SRVC is rejected, all of the template files that belong to that SRVC, located in the directory data/CV/<network>, will be deleted. This means that any manually created files will be deleted. Retain backup copies of all required template files in a secure location.
Cisco Provisioning Center does not maintain the $CCP_DATA/CV/prototemplates directory. It does not create or delete any files in this directory. It is the responsibility of the Cisco Provisioning Center administrator to maintain this directory.
Cisco VPN Solution Center TemplatesOne SRVC may have one or more templates which are created by the Cisco VPN Solution Center Template Manager.
The Template Manager in the Cisco VPN Solution Center provides Cisco IOS command generation capability. The Template Manager defines standard templates to generate Cisco IOS configuration files for common provisioning tasks, such as common IPv4, QoS, and VPN provisioning.
A template is a file created by the Template Manager that stores a Cisco VPN Solution Center template definition.
A template data file is a text file that stores variables to generate the template. A valid data file contains name-value pairs for all the variables defined in a template. Each template data file includes the specific data for a particular device (for example, the management IP address or host name of each device). The template and data files are in XML format.
Each template can be associated with multiple data files; however, each data file can only be associated with a single template. You can select which data file to use to generate a template. The filename suffix for data files is .dat.
You can use a data file and its associated template to create a template configuration file. A template configuration file is an IOS configuration file that stores the Cisco IOS commands created by the Template Manager. A template configuration file can be either a partial or complete configuration file. When you generate a template configuration file using a particular data file, the template configuration filename is the same as the data file name. The template data file is tightly linked with its corresponding template.
The template configuration file is merged with the VPN SC configlet. VPN Solution Center downloads the combined configlet to the edge device router. You can apply the same template to multiple edge devices, assigning the appropriate template data file for each device.
The template, its data files, and all template configuration files are mapped to a single directory. VPN Solution Center creates the initial VPN SC configlet. You can then create a template configuration file through the Template Manager.
You can then associate a template configuration file with an SRVC, which effectively merges the VPN SC configlet and the template configuration file. Cisco VPN Solution Center Equipment Module integrates Cisco VPN Solution Center Templates with a Service Request using VPNSC Template attributes. Each VPN SC Template attribute associates a VPN SC Template with a PE or CE router which is connected by the parent SRVC.
For a given edge router the VPNSC Template service object specifies:
• template name
• template data file name
3-7Cisco VPN Solutions Center Equipment Module Configuration Guide
OL-1816-02
Chapter 3 Working with Profiles and TemplatesWorking with Custom Templates
• whether or not the template configuration file should be appended or prepended to the VPN SC configlet.
• whether or not the template configuration file is active or inactive for downloading to the edge device.
3-8Cisco VPN Solutions Center Equipment Module Configuration Guide
OL-1816-02
Cisco VPN Solutions CenterOL-1816-02
A P P E N D I X A
Attribute ReferenceThe IP VPN Service Application is used to create all of the required objects. You will then use the Cisco VPN Solution Center Equipment Module to upload configurations from the Cisco VPN Solution Center equipment module.
This appendix is provided as a reference only, for the objects and object attributes associated with the Cisco VPN Solution Center Equipment Module. Normally, you will not create any of these objects through the Cisco VPN Solution Center Equipment Module.
Table A-1 Cisco VPN Solution Center Equipment Module Attribute Reference Tables
Element Type Element Name Table
Fabric Elements Admin Domain Table A-7
Region Table A-9
Address Pool Table A-11
Customer Table A-13
Site Table A-15
CoS Table A-17
CoS Class Table A-19
VPN Table A-21
CERC Table A-23
PE Router Table A-25
CE Router Table A-27
Physical Port Table A-29
ATM Logical Port Table A-31
Frame Relay Logical Port Table A-33
Logical Port Table A-35
Services SRVC Table A-38
CERC Membership Table A-40
Redistributed Protocol Table A-42
Route Table A-44
Cable Secondary Address Table A-46
VPN SC Template Table A-48
A-1 Equipment Module Configuration Guide
Appendix A Attribute ReferenceTable Conventions
For information about objects and object attributes related to the Cisco VPN Solution Center Equipment Module, Refer to the IP VPN Service Application Solutions Guide.
Table ConventionsTable A-2 lists the types of tables provided for each object in this appendix.
Table A-3 describes the table conventions that are used in the object attribute tables. Within each object attribute table, attributes are sorted alphabetically by FTI name.
Table A-2 Table Types
Table Description
Object - Characteristics The object characteristics table lists the class name, class label, superclass, and database tables for the object.
Object - Attributes The object attributes table provides information about each attribute, including the GUI label, FTI name, description, range of acceptable values, and default values. For more information about this table type, see Table A-3.
Object - Aliases The object aliases table provides information about attributes that are aliases for other attributes. Aliases are provided to allow either attribute of an AZ pair to be referenced by a single name regardless of whether it is at the A endpoint or at the Z endpoint. For more information about aliases, see “Attribute Description” in Table A-3.
A-2Cisco VPN Solutions Center Equipment Module Configuration Guide
OL-1816-02
Appendix A Attribute ReferenceTable Conventions
Table A-3 Conventions Used In Object Attribute Tables
Convention Description
Attribute Name
The GUI label for each attribute (if applicable) is shown in double quotes. If the attribute does not have a GUI label, only the double quotes appear. The FTI name for each attribute appears in square brackets after the GUI label, in the format “GUI Label” [fti_name].
For example:
"Name" [srname]
Attribute Description
Defines the attribute. Some attributes contain restrictions or dependencies that are outside the scope of the table conventions. In this case, the restriction or dependency is included with the attribute description or within a footnote.
An attribute that is a pointer to another object is shown with the relation type and classname.
For example:
“ “ [sra_tp]
Relation of Type OPTIONAL, Relation Class Name = C4lpLport
For an attribute that has aliases, the FTI names for the aliases are included in the description, along with the FTI names of the attributes at the other endpoint.
For example:
"VCI" [raa_vci]
Alias: ralocalvci (other param: raz_vci)
Alias: raremotevci (other param: raz_vci)
means that ralocalvci and raremotevci can be used as an alias for either raa_vci or raz_vci.
In this case, the entry for the other endpoint is:
"VCI" [raz_vci]
Alias: ralocalvci (other param: raa_vci)
Alias: raremotevci (other param: raa_vci)
Attribute Flags
The attribute flags describe the attribute behavior as follows:
Create: O The attribute is optional upon creation.
Create: R This attribute is required upon creation.
Create: P This attribute is prohibited upon creation.
Modify: O This attribute is optional upon modification.
Modify: R This attribute is required upon modification.
Modify: P This attribute is prohibited from modification.
Profiled This attribute can be profiled.
Persistent This attribute is stored in the database (rather than existing only in memory).
A-3Cisco VPN Solutions Center Equipment Module Configuration Guide
OL-1816-02
Appendix A Attribute ReferenceTable Conventions
Acceptable Values
This column indicates the acceptable value(s) for each attribute.
Text (n) This attribute requires a text string containing as many as n characters.
integer_1 – integer_2 This attribute requires a numerical value ranging from integer1 through integer2.
value_1 | value_2 | value_n
This attribute requires one of the enumerated values listed (value_1 or value_2 or value_n).
BOOLEAN This attribute requires a value of true or false.
Default This column indicates the default value (if applicable) for each attribute. Text default values are shown in double quotes. For a text attribute that does not have a default value, only the double quotes appear.
Table A-3 Conventions Used In Object Attribute Tables (continued)
Convention Description
A-4Cisco VPN Solutions Center Equipment Module Configuration Guide
OL-1816-02
Appendix A Attribute ReferenceVPN Network
VPN
Net
wor
kO
bje
ct C
lass
: C
Vnt
VP
NN
etw
ork
Fil
e N
ame:
CV
ntV
PN
Net
wor
k.oa
f
Tab
leA
-4V
PN
Ne
two
rk -
ch
ara
cte
risti
cs
Cla
ss N
ame:
CV
ntV
PN
Net
wor
k
Sho
rt C
lass
Nam
e:nt
Cla
ss L
abel
:C
isco
VP
N V
PN
Net
wor
k
Sup
ercl
ass:
SR
ntN
etw
ork
Per
sist
ence
:O
WN
Tab
leA
-5V
PN
Ne
two
rk
Attr
ibut
esA
ccep
tabl
e Va
lues
Def
ault
Valu
es
"IFR
Nam
e" [
cvifr
host
]
Spe
cify
the
IF
R s
erve
r ho
st.
Cre
ate:
OM
odif
y:O
P
ersi
sten
t
P
rofi
led
Text
(64
)""
"Pas
swor
d" [
cvpa
ssw
ord]
Ent
er t
he V
PN
SC
pas
swor
d. T
his
is t
he l
og i
n pa
ssw
ord
used
to
acce
ss t
he V
PN
SC
GU
I.
Cre
ate:
O
M
odif
y:O
P
ersi
sten
t
P
rofi
led
Text
(24
)"a
dmin
"
"Ser
ver N
ame"
[cv
serv
erho
st]
Spe
cify
the
VP
N S
C s
erve
r ho
st.
Cre
ate:
O
M
odif
y:O
P
ersi
sten
t
P
rofi
led
Text
(64
)""
"Use
r Nam
e" [
cvus
erna
me]
Ent
er t
he V
PN
SC
use
r na
me.
Thi
s is
the
log
in
ID u
sed
to a
cces
s th
e V
PN
SC
GU
I.
Cre
ate:
O
M
odif
y:O
P
ersi
sten
t
P
rofi
led
Text
(24
)"a
dmin
"
"VPN
SC
Vers
ion"
[cv
vpns
cver
sion
]
Spe
cify
the
ver
sion
of
VP
N S
C t
hat
you
are
runn
ing.
Cre
ate:
O
M
odif
y:O
P
ersi
sten
t
P
rofi
led
Text
(24
)"2
.0.0
.0"
A-5Cisco VPN Solutions Center Equipment Module Configuration Guide
OL-1816-02
Appendix A Attribute ReferenceVPN Network
"Dom
ain"
[do
mai
n]
Thi
s is
the
man
agem
ent
dom
ain
nam
e. I
t id
enti
fies
a g
eogr
aphi
cal
or o
rgan
izat
iona
l sc
ope
for
oper
ator
acc
ess
cont
rol
and
corr
espo
nds
to t
he M
D t
ag w
ithi
n th
e C
isco
Pro
visi
onin
g C
ente
r se
curi
ty p
roce
dure
.
Cre
ate:
O
M
odif
y:O
P
ersi
sten
t
P
rofi
led
Text
(16
)""
"Cla
ss"
[src
lass
]
Spe
cify
the
cla
ss n
ame
of t
his
obje
ct.
Cre
ate:
P
M
odif
y:P
P
ersi
sten
t
P
rofi
led
Text
(4)
"CV
nt"
"Tra
nsit
Cost
" [s
rcos
t]
Thi
s is
the
cost
of
cros
sing
the
sub-
netw
ork.
Thi
s at
trib
ute
is u
sed
by th
e T
hrea
der
to d
eter
min
e th
e lo
wes
t co
st p
ath
whe
n th
read
ing
a se
rvic
e.
Cre
ate:
O
M
odif
y:O
P
ersi
sten
t
P
rofi
led
0 -
2147
4836
4750
"Loc
ked
agai
nst D
elet
ion"
[sr
lock
ed]
Thi
s at
trib
ute
is u
sed
to m
ark
an o
bjec
t so
tha
t it
can
not
be a
ccid
enta
lly
dele
ted.
It
is u
sed
as
foll
ows:
Whe
n sr
lock
ed =
fal
se th
e no
rmal
beh
avio
r ap
plie
s (e
.g.,
the
obje
ct c
anno
t be
dele
ted
whe
n it
is
pend
ing
in a
noth
er tr
ansa
ctio
n, e
tc.)
. Hen
ce u
nder
mos
t sit
uati
ons
it w
ill b
e po
ssib
le to
del
ete
the
obje
ct.
Whe
n sr
lock
ed =
true
the
obje
ct's
ow
ner
(EM
or
SA
) w
ill r
ejec
t any
att
empt
to d
elet
e th
e ob
ject
. T
his
over
ride
s th
e no
rmal
beh
avio
r.
Cre
ate:
O
M
odif
y:O
P
ersi
sten
t
P
rofi
led
BO
OL
EA
Nfa
lse
"Nam
e" [
srna
me]
Spe
cify
the
net
wor
k na
me.
Thi
s na
me
mus
t be
uni
que
wit
hin
the
CV
net
wor
k.
Cre
ate:
O
M
odif
y:P
P
ersi
sten
t
Text
(64
)""
"Thi
s N
etw
ork
is O
paqu
e" [
srop
aque
]
Spe
cify
whe
ther
or
not
this
net
wor
k is
opa
que.
Cre
ate:
O
M
odif
y:O
P
ersi
sten
t
P
rofi
led
BO
OL
EA
Nfa
lse
Tab
leA
-5V
PN
Ne
two
rk (
co
nti
nu
ed
)
Attr
ibut
esA
ccep
tabl
e Va
lues
Def
ault
Valu
es
A-6Cisco VPN Solutions Center Equipment Module Configuration Guide
OL-1816-02
Appendix A Attribute ReferenceVPN Network
"Pre
-pro
visi
oned
" [s
rpre
prov
]
Indi
cate
s if
the
obj
ect
is p
re-p
rovi
sion
ed o
r no
t. T
he d
efau
lt v
alue
is
Non
e, i
ndic
atin
g th
at t
he
node
obj
ect i
s no
t pre
-pro
visi
oned
. If
Ful
l or
Init
is s
elec
ted,
exi
stin
g S
ervi
ce E
lem
ents
(SE
s) c
an
be u
sed
by n
ew S
ervi
ce O
bjec
ts. T
he T
hrea
der w
ill a
ssig
n th
e pr
oper
SE
that
mat
ches
the
Ser
vice
O
bjec
t cri
teri
a. I
n In
it m
ode,
if
a su
itab
le e
xist
ing
SE
is n
ot f
ound
, the
Thr
eade
r w
ill
atte
mpt
to
crea
te o
ne f
or t
he S
ervi
ce O
bjec
t. I
n F
ull
mod
e, i
f a
suit
able
exi
stin
g S
E i
s no
t fo
unds
, the
T
hrea
der
wil
l no
t cr
eate
one
and
rep
ort
an e
rror
. Thi
s at
trib
ute
is e
ffec
tive
onl
y w
hen
Opa
que
attr
ibut
e (a
bove
) is
TR
UE
. Thi
s E
quip
men
t M
odul
e on
ly s
uppo
rts
Non
e or
Ful
l m
ode.
Cre
ate:
O
M
odif
y:O
P
ersi
sten
t
P
rofi
led
Ful
l | I
nit
| Non
eN
one
"Pro
file"
[sr
prof
ile]
Rel
atio
n of
Typ
e P
RO
FIL
E, R
elat
ion
Cla
ss N
ame
= C
Vnt
VP
NN
etw
orkP
rof
Spe
cify
the
nam
e of
the
pro
file
to
be u
sed
whe
n cr
eati
ng t
his
obje
ct.
Cre
ate:
O
M
odif
y:O
"Res
ourc
e M
ap"
[srr
mm
ap]
The
thre
ader
wil
l use
the
srrm
map
set
ting
s in
the
Net
wor
k an
d th
e tw
o lo
gica
l por
ts to
det
erm
ine
wha
t ki
nds
of c
ircu
its
are
poss
ible
.
Cre
ate:
O
M
odif
y:O
P
ersi
sten
t
P
rofi
led
0 -
2147
4836
470
"Con
tain
ing
Net
wor
k" [
srsu
bnet
.srn
ame]
Thi
s is
the
nam
e of
the
net
wor
k of
whi
ch t
his
netw
ork
obje
ct i
s a
subn
et (
opti
onal
).
Cre
ate:
O
M
odif
y:O
P
ersi
sten
t
Text
(32
)""
"Use
Bac
kup
EMS"
[sr
useb
acku
pem
s]
Spe
cify
whe
ther
or
not
to u
se a
bac
kup
EM
S. D
isab
led
to u
se t
he p
rim
ary
EM
S. E
nabl
ed to
use
th
e ba
ckup
EM
S.
Cre
ate:
O
M
odif
y:O
P
ersi
sten
t
P
rofi
led
BO
OL
EA
Nfa
lse
"Cus
tom
er"
[vpn
]
Spe
cify
the
cus
tom
er n
ame.
The
cus
tom
er f
ield
, lik
e th
e D
omai
n fi
eld,
is
used
for
Cis
co
Pro
visi
onin
g C
ente
r se
curi
ty p
urpo
ses.
It
iden
tifi
es t
he S
ervi
ce o
bjec
t w
ith
a cu
stom
er a
nd i
s us
ed a
s a
tag
to g
ive
oper
ator
s ac
cess
to
this
cus
tom
er’s
Ser
vice
obj
ect.
Cre
ate:
O
M
odif
y:O
P
ersi
sten
t
P
rofi
led
Text
(16
)""
Tab
leA
-5V
PN
Ne
two
rk (
co
nti
nu
ed
)
Attr
ibut
esA
ccep
tabl
e Va
lues
Def
ault
Valu
es
A-7Cisco VPN Solutions Center Equipment Module Configuration Guide
OL-1816-02
Appendix A Attribute ReferenceVPN Admin Domain
VPN
Adm
in D
omai
n O
bje
ct C
lass
: C
Vad
Adm
inD
omai
n
Fil
e N
ame:
CV
adA
dmin
Dom
ain.
oaf
Tab
leA
-6V
PN
Ad
min
Do
main
- c
ha
racte
risti
cs
Cla
ss N
ame:
CV
adA
dmin
Dom
ain
Sho
rt C
lass
Nam
e:ad
Cla
ss L
abel
:C
isco
VP
N A
dmin
Dom
ain
Sup
ercl
ass:
Per
sist
ence
:O
WN
Tab
leA
-7V
PN
Ad
min
Do
main
- a
ttri
bu
tes
Attr
ibut
esA
ccep
tabl
e Va
lues
Def
ault
Valu
es
"Aut
onom
ous
Syst
em N
umbe
r" [
cvas
num
ber]
Spe
cify
the
aut
onom
ous
syst
em n
umbe
r fo
r th
is d
omai
n. T
his
num
ber
mus
t be
uni
que
for
your
ne
twor
k.
Cre
ate:
O
M
odif
y:P
P
ersi
sten
t
P
rofi
led
0 -
2147
4836
470
"Con
tact
Info
rmat
ion"
[cv
cont
actin
fo]
Spe
cify
the
cus
tom
er c
onta
ct i
nfor
mat
ion.
Cre
ate:
O
M
odif
y:O
P
ersi
sten
t
P
rofi
led
Text
(64
)""
"Max
imum
Num
ber"
[cv
max
subn
um]
Spe
cify
the
sub
Inte
rfac
e m
axim
um n
umbe
r. T
his
is u
sed
by S
RV
C.
Cre
ate:
O
M
odif
y:O
P
ersi
sten
t
P
rofi
led
0 -
2147
4836
4740
95
"Sta
rtin
g N
umbe
r" [
cvm
insu
bnum
]
Spe
cify
the
sub
Inte
rfac
e st
arti
ng n
umbe
r. T
his
is u
sed
by S
RV
C.
Cre
ate:
O
M
odif
y:O
P
ersi
sten
t
P
rofi
led
0 -
2147
4836
4710
00
"Rou
te D
istin
guis
her S
eed"
[cv
rdse
ed]
Spe
cify
the
rou
te d
isti
ngui
sher
see
d.
Cre
ate:
O
M
odif
y:P
P
ersi
sten
t
P
rofi
led
0 -
2147
4836
4710
0
A-8Cisco VPN Solutions Center Equipment Module Configuration Guide
OL-1816-02
Appendix A Attribute ReferenceVPN Admin Domain
"Rou
te T
arge
t See
d" [
cvrt
seed
]
Spe
cify
the
rou
te t
arge
t se
ed.
Cre
ate:
O
M
odif
y:P
P
ersi
sten
t
P
rofi
led
0 -
2147
4836
4710
0
"MD
" [d
omai
n]
Thi
s is
the
man
agem
ent
dom
ain
nam
e. I
t id
enti
fies
a g
eogr
aphi
cal
or o
rgan
izat
iona
l sc
ope
for
oper
ator
acc
ess
cont
rol
and
corr
espo
nds
to t
he M
D t
ag w
ithi
n th
e C
isco
Pro
visi
onin
g C
ente
r se
curi
ty p
roce
dure
.
Cre
ate:
O
M
odif
y:O
P
ersi
sten
t
P
rofi
led
Text
(16
)""
"Nam
e" [
srna
me]
Spe
cify
the
net
wor
k na
me.
Thi
s na
me
mus
t be
uni
que
wit
hin
the
CV
net
wor
k.
Cre
ate:
O
M
odif
y:P
P
ersi
sten
t
P
rofi
led
Text
(32
)""
"VPN
Net
wor
k" [
srne
twor
k.sr
nam
e]
Spe
cify
the
con
tain
ing
netw
ork.
Cre
ate:
O
M
odif
y:P
P
ersi
sten
t
Text
(32
)""
"Ser
vice
Req
uest
" [s
rsoi
d]
Rel
atio
n of
Typ
e O
PT
ION
AL
, Rel
atio
n C
lass
Nam
e =
SR
soS
ervi
ceO
bjec
t
Thi
s is
the
obj
ect
id o
f th
e S
RV
C u
sing
thi
s ad
min
dom
ain.
Cre
ate:
O
M
odif
y:O
"VPN
" [v
pn]
Spe
cify
the
cus
tom
er n
ame.
The
cus
tom
er f
ield
, lik
e th
e D
omai
n fi
eld,
is
used
for
Cis
co
Pro
visi
onin
g C
ente
r se
curi
ty p
urpo
ses.
It
iden
tifi
es t
he S
ervi
ce o
bjec
t w
ith
a cu
stom
er a
nd i
s us
ed a
s a
tag
to g
ive
oper
ator
s ac
cess
to
this
cus
tom
er’s
Ser
vice
obj
ect.
Cre
ate:
O
M
odif
y:O
P
ersi
sten
t
P
rofi
led
Text
(16
)""
Tab
leA
-7V
PN
Ad
min
Do
main
- a
ttri
bu
tes (
co
nti
nu
ed
)
Attr
ibut
esA
ccep
tabl
e Va
lues
Def
ault
Valu
es
A-9Cisco VPN Solutions Center Equipment Module Configuration Guide
OL-1816-02
Appendix A Attribute ReferenceVPN Region
VPN
Reg
ion O
bje
ct C
lass
: C
Vrf
Reg
ion
Fil
e N
ame:
CV
rfR
egio
n.oa
f
Tab
leA
-8V
PN
Reg
ion
- c
hara
cte
risti
cs
Cla
ss N
ame:
CV
rfR
egio
n
Sho
rt C
lass
Nam
e:rf
Cla
ss L
abel
:C
isco
VP
N R
egio
n
Sup
ercl
ass:
Per
sist
ence
:O
WN
Tab
leA
-9V
PN
Reg
ion
- a
ttri
bu
tes
Attr
ibut
esA
ccep
tabl
e Va
lues
Def
ault
Valu
es
"Adm
inD
omai
n" [
cvad
min
dom
ain.
srna
me]
Spe
cify
the
adm
in d
omai
n th
at c
onta
ins
this
reg
ion
Cre
ate:
O
M
odif
y:P
P
ersi
sten
t
Text
(32
)""
"VPN
Net
wor
k" [
cvad
min
dom
ain.
srne
twor
k.sr
nam
e]
Spe
cify
the
nam
e of
the
con
tain
ing
netw
ork.
Cre
ate:
P
M
odif
y:P
P
ersi
sten
t
Text
(32
)""
"MD
" [d
omai
n]
Thi
s is
the
man
agem
ent
dom
ain
nam
e. I
t id
enti
fies
a g
eogr
aphi
cal
or o
rgan
izat
iona
l sc
ope
for
oper
ator
acc
ess
cont
rol
and
corr
espo
nds
to t
he M
D t
ag w
ithi
n th
e C
isco
Pro
visi
onin
g C
ente
r se
curi
ty p
roce
dure
.
Cre
ate:
O
M
odif
y:O
P
ersi
sten
t
P
rofi
led
Text
(16
)""
"Nam
e" [
srna
me]
Spe
cify
the
net
wor
k na
me.
Thi
s na
me
mus
t be
uni
que
wit
hin
the
CV
net
wor
k.
Cre
ate:
O
M
odif
y:O
P
ersi
sten
t
P
rofi
led
Text
(64
)""
A-10Cisco VPN Solutions Center Equipment Module Configuration Guide
OL-1816-02
Appendix A Attribute ReferenceVPN Region
"srn
etw
ork.
srna
me"
[sr
netw
ork.
srna
me]
Spe
cify
the
net
wor
k th
at c
onta
ins
this
reg
ion
Cre
ate:
O
M
odif
y:P
P
ersi
sten
t
Text
(32
)""
"VPN
" [v
pn]
Spe
cify
the
cus
tom
er n
ame.
The
cus
tom
er f
ield
, lik
e th
e D
omai
n fi
eld,
is
used
for
Cis
co
Pro
visi
onin
g C
ente
r se
curi
ty p
urpo
ses.
It
iden
tifi
es t
he S
ervi
ce o
bjec
t w
ith
a cu
stom
er a
nd i
s us
ed a
s a
tag
to g
ive
oper
ator
s ac
cess
to
this
cus
tom
er’s
Ser
vice
obj
ect.
Cre
ate:
O
M
odif
y:O
P
ersi
sten
t
P
rofi
led
Text
(16
)""
Tab
leA
-9V
PN
Reg
ion
- a
ttri
bu
tes (
co
nti
nu
ed
)
Attr
ibut
esA
ccep
tabl
e Va
lues
Def
ault
Valu
es
A-11Cisco VPN Solutions Center Equipment Module Configuration Guide
OL-1816-02
Appendix A Attribute ReferenceVPN Address Pool
VPN
Add
ress
Poo
l O
bje
ct C
lass
: C
Vap
Add
ress
Poo
l
Fil
e N
ame:
CV
apA
ddre
ssP
ool
Tab
leA
-10
VP
N A
dd
ress P
oo
l -
ch
ara
cte
risti
cs
Cla
ss N
ame:
CV
apA
ddre
ssP
ool
Sho
rt C
lass
Nam
e:ap
Cla
ss L
abel
:C
isco
VP
N A
ddre
ssP
ool
Sup
ercl
ass:
Per
sist
ence
:O
WN
Tab
leA
-11
VP
N A
dd
ress P
oo
l -
att
rib
ute
s
Attr
ibut
esA
ccep
tabl
e Va
lues
Def
ault
Valu
es
"Add
ress
" [c
vadd
ress
]
Spe
cify
the
add
ress
/mas
k. T
he a
ddre
ss/m
ask
mus
t be
uni
que
in t
he r
egio
n. T
his
attr
ibut
e m
ust
be o
f th
e fo
rmat
aaa
.bbb
.ccc
.ddd
/mas
k w
here
aaa
.bbb
.ccc
.ddd
is
a va
lid
IP a
ddre
ss a
nd m
ask
is
a va
lue
from
0 t
o 29
Cre
ate:
O
M
odif
y:P
P
ersi
sten
t
P
rofi
led
Text
(19
)""
"Reg
ion"
[cv
regi
on.s
rnam
e]
Spe
cify
the
reg
ion
that
con
tain
s th
is a
ddre
ss p
ool.
Thi
s at
trib
ute
is r
equi
red
for
PE
rou
ters
.
Cre
ate:
O
M
odif
y:P
P
ersi
sten
t
Text
(32
)""
"Typ
e" [
cvty
pe]
Spe
cify
the
poo
l ty
pe.
Cre
ate:
O
M
odif
y:P
P
ersi
sten
t
P
rofi
led
30 |
3230
A-12Cisco VPN Solutions Center Equipment Module Configuration Guide
OL-1816-02
Appendix A Attribute ReferenceVPN Address Pool
"MD
" [d
omai
n]
Thi
s is
the
man
agem
ent
dom
ain
nam
e. I
t id
enti
fies
a g
eogr
aphi
cal
or o
rgan
izat
iona
l sc
ope
for
oper
ator
acc
ess
cont
rol
and
corr
espo
nds
to t
he M
D t
ag w
ithi
n th
e C
isco
Pro
visi
onin
g C
ente
r se
curi
ty p
roce
dure
.
Cre
ate:
O
M
odif
y:O
P
ersi
sten
t
P
rofi
led
Text
(16
)""
"VPN
" [v
pn]
Spe
cify
the
cus
tom
er n
ame.
The
cus
tom
er f
ield
, lik
e th
e D
omai
n fi
eld,
is
used
for
Cis
co
Pro
visi
onin
g C
ente
r se
curi
ty p
urpo
ses.
It
iden
tifi
es t
he S
ervi
ce o
bjec
t w
ith
a cu
stom
er a
nd i
s us
ed a
s a
tag
to g
ive
oper
ator
s ac
cess
to
this
cus
tom
er’s
Ser
vice
obj
ect.
Cre
ate:
O
M
odif
y:O
P
ersi
sten
t
P
rofi
led
Text
(16
)""
Tab
leA
-11
VP
N A
dd
ress P
oo
l -
att
rib
ute
s (
co
nti
nu
ed
)
Attr
ibut
esA
ccep
tabl
e Va
lues
Def
ault
Valu
es
A-13Cisco VPN Solutions Center Equipment Module Configuration Guide
OL-1816-02
Appendix A Attribute ReferenceVPN Customer
VPN
Cus
tom
er
Ob
ject
Cla
ss:
CV
crC
usto
mer
Fil
e N
ame:
CV
crC
usto
mer
.oaf
Tab
leA
-12
VP
N C
usto
me
r -
ch
ara
cte
risti
cs
Cla
ss N
ame:
CV
crC
usto
mer
Sho
rt C
lass
Nam
e:cr
Cla
ss L
abel
:C
isco
VP
N C
usto
mer
Sup
ercl
ass:
Per
sist
ence
:O
WN
Tab
leA
-13
VP
N C
usto
me
r -
att
rib
ute
s
Attr
ibut
esA
ccep
tabl
e Va
lues
Def
ault
Valu
es
"Con
tact
Info
rmat
ion"
[cv
cont
actin
fo]
Spe
cify
the
cus
tom
er c
onta
ct i
nfor
mat
ion.
Thi
s at
trib
ute
cann
ot b
e nu
ll.
Cre
ate:
O
M
odif
y:O
P
ersi
sten
t
P
rofi
led
Text
(25
5)""
"Em
ail A
ddre
ss"
[cve
mai
l]
Spe
cify
the
e-m
ail
addr
ess
for
unm
anag
ed C
E R
oute
rs.
Cre
ate:
O
M
odif
y:O
P
ersi
sten
t
P
rofi
led
Text
(64
)""
"MD
" [d
omai
n]
Thi
s is
the
man
agem
ent
dom
ain
nam
e. I
t id
enti
fies
a g
eogr
aphi
cal
or o
rgan
izat
iona
l sc
ope
for
oper
ator
acc
ess
cont
rol
and
corr
espo
nds
to t
he M
D t
ag w
ithi
n th
e C
isco
Pro
visi
onin
g C
ente
r se
curi
ty p
roce
dure
.
Cre
ate:
O
M
odif
y:O
P
ersi
sten
t
P
rofi
led
Text
(16
)""
"Nam
e" [
srna
me]
Spe
cify
the
net
wor
k na
me.
Thi
s na
me
mus
t be
uni
que
wit
hin
the
CV
net
wor
k.
Cre
ate:
O
M
odif
y:P
P
ersi
sten
t
P
rofi
led
Text
(64
)""
A-14Cisco VPN Solutions Center Equipment Module Configuration Guide
OL-1816-02
Appendix A Attribute ReferenceVPN Customer
"VPN
Net
wor
k" [
srne
twor
k.sr
nam
e]
Spe
cify
the
net
wor
k co
ntai
ning
thi
s cu
stom
er
Cre
ate:
O
M
odif
y:P
P
ersi
sten
t
Text
(32
)""
"VPN
" [v
pn]
Spe
cify
the
cus
tom
er n
ame.
The
cus
tom
er f
ield
, lik
e th
e D
omai
n fi
eld,
is
used
for
Cis
co
Pro
visi
onin
g C
ente
r se
curi
ty p
urpo
ses.
It
iden
tifi
es t
he S
ervi
ce o
bjec
t w
ith
a cu
stom
er a
nd i
s us
ed a
s a
tag
to g
ive
oper
ator
s ac
cess
to
this
cus
tom
er’s
Ser
vice
obj
ect.
Cre
ate:
O
M
odif
y:O
P
ersi
sten
t
P
rofi
led
Text
(16
)""
Tab
leA
-13
VP
N C
usto
me
r -
att
rib
ute
s (
co
nti
nu
ed
)
Attr
ibut
esA
ccep
tabl
e Va
lues
Def
ault
Valu
es
A-15Cisco VPN Solutions Center Equipment Module Configuration Guide
OL-1816-02
Appendix A Attribute ReferenceVPN Site
VPN
Site
O
bje
ct C
lass
: C
Vst
Sit
e
Fil
e N
ame:
CV
stS
ite.
oaf
Tab
leA
-14
VP
N S
ite
- c
ha
racte
risti
cs
Cla
ss N
ame:
CV
stS
ite
Sho
rt C
lass
Nam
e:st
Cla
ss L
abel
:C
isco
VP
N S
ite
Sup
ercl
ass:
Per
sist
ence
:O
WN
Tab
leA
-15
VP
N S
ite
- a
ttri
bu
tes
Attr
ibut
esA
ccep
tabl
e Va
lues
Def
ault
Valu
es
"Cus
tom
er"
[cvc
usto
mer
.srn
ame]
Thi
s is
the
con
tain
ing
cust
omer
rou
ter
Cre
ate:
O
M
odif
y:P
P
ersi
sten
t
Text
(32
)""
"VPN
Net
wor
k" [
cvcu
stom
er.s
rnet
wor
k.sr
nam
e]
Thi
s is
the
nam
e of
the
con
tain
ing
netw
ork.
Cre
ate:
P
M
odif
y:P
P
ersi
sten
t
Text
(32
)""
"Em
ail A
ddre
ss"
[cve
mai
l]
Spe
cify
the
e-m
ail
addr
ess
for
unm
anag
ed C
E R
oute
rs.
Cre
ate:
O
M
odif
y:O
P
ersi
sten
t
P
rofi
led
Text
(64
)""
"Loc
atio
n In
form
atio
n" [
cvlo
catio
ninf
o]
Spe
cify
sit
e lo
cati
on i
nfor
mat
ion.
Cre
ate:
O
M
odif
y:O
P
ersi
sten
t
P
rofi
led
Text
(25
5)""
"MD
" [d
omai
n]
Thi
s is
the
man
agem
ent
dom
ain
nam
e. I
t id
enti
fies
a g
eogr
aphi
cal
or o
rgan
izat
iona
l sc
ope
for
oper
ator
acc
ess
cont
rol
and
corr
espo
nds
to t
he M
D t
ag w
ithi
n th
e C
isco
Pro
visi
onin
g C
ente
r se
curi
ty p
roce
dure
.
Cre
ate:
O
M
odif
y:O
P
ersi
sten
t
P
rofi
led
Text
(16
)""
A-16Cisco VPN Solutions Center Equipment Module Configuration Guide
OL-1816-02
Appendix A Attribute ReferenceVPN Site
"Nam
e" [
srna
me]
Spe
cify
the
net
wor
k na
me.
Thi
s na
me
mus
t be
uni
que
wit
hin
the
CV
net
wor
k.
Cre
ate:
O
M
odif
y:P
P
ersi
sten
t
P
rofi
led
Text
(64
)""
"srn
etw
ork.
srna
me"
[sr
netw
ork.
srna
me]
Spe
cify
the
net
wor
k co
ntai
ning
thi
s cu
stom
er
Cre
ate:
O
M
odif
y:P
P
ersi
sten
t
Text
(32
)""
"VPN
" [v
pn]
Spe
cify
the
cus
tom
er n
ame.
The
cus
tom
er f
ield
, lik
e th
e D
omai
n fi
eld,
is
used
for
Cis
co
Pro
visi
onin
g C
ente
r se
curi
ty p
urpo
ses.
It
iden
tifi
es t
he S
ervi
ce o
bjec
t w
ith
a cu
stom
er a
nd i
s us
ed a
s a
tag
to g
ive
oper
ator
s ac
cess
to
this
cus
tom
er’s
Ser
vice
obj
ect.
Cre
ate:
O
M
odif
y:O
P
ersi
sten
t
P
rofi
led
Text
(16
)""
Tab
leA
-15
VP
N S
ite
- a
ttri
bu
tes (
co
nti
nu
ed
)
Attr
ibut
esA
ccep
tabl
e Va
lues
Def
ault
Valu
es
A-17Cisco VPN Solutions Center Equipment Module Configuration Guide
OL-1816-02
Appendix A Attribute ReferenceVPN CoS
VPN
CoS
O
bje
ct C
lass
: C
Vcp
CoS
Fil
e N
ame:
CV
cpC
oS.o
af
Tab
leA
-16
VP
N C
oS
- c
hara
cte
risti
cs
Cla
ss N
ame:
CV
cpC
oS
Sho
rt C
lass
Nam
e:cp
Cla
ss L
abel
:C
isco
VP
N C
oS
Sup
ercl
ass:
Per
sist
ence
:O
WN
Tab
leA
-17
VP
N C
oS
- a
ttri
bu
tes
Attr
ibut
esA
ccep
tabl
e Va
lues
Def
ault
Valu
es
"App
ly A
dapt
ive
on F
R" [
cvad
aptiv
efr]
Spe
cify
whe
ther
or
not
to a
pply
ada
ptat
ion
on F
R t
raff
ic.
Cre
ate:
O
M
odif
y:P
P
ersi
sten
t
P
rofi
led
BO
OL
EA
Nfa
lse
"Adm
inD
omai
n" [
cvad
min
dom
ain.
srna
me]
Thi
s is
the
adm
inis
trat
ive
dom
ain
that
con
tain
s th
is C
oS.
Cre
ate:
O
M
odif
y:P
P
ersi
sten
t
Text
(32
)""
"VPN
Net
wor
k" [
cvad
min
dom
ain.
srne
twor
k.sr
nam
e]
Thi
s is
the
net
wor
k th
at c
onta
ins
the
adm
inis
trat
ive
dom
ain
that
con
tain
s th
is C
oS.
Cre
ate:
O
M
odif
y:O
Text
(64
)""
"Use
CA
R" [
cvca
rf]
Spe
cify
whe
ther
you
wan
t to
use
CA
R f
or c
onge
stio
n m
anag
emen
t.
Cre
ate:
O
M
odif
y:P
P
ersi
sten
t
P
rofi
led
BO
OL
EA
Nfa
lse
"Con
trac
t Mul
tiplie
r" [
cvco
ntra
ctm
ultip
]
Spe
cify
the
out-
of-c
ontr
act m
ulti
plie
r to
be
appl
ied
to th
e co
ntra
cted
dat
a-fl
ow r
ate
to d
eter
min
e th
e ex
cess
ive-
rate
lim
it. T
he e
xces
sive
-rat
e li
mit
is th
e ra
te b
eyon
d w
hich
dat
a pa
cket
s ar
e to
be
drop
ped.
Cre
ate:
O
M
odif
y:P
P
ersi
sten
t
P
rofi
led
Text
(15
)""
A-18Cisco VPN Solutions Center Equipment Module Configuration Guide
OL-1816-02
Appendix A Attribute ReferenceVPN CoS
"Use
Fai
rQue
uein
g" [
cvfa
irqu
eue]
Spe
cify
whe
ther
you
wan
t to
use
fai
r qu
euei
ng f
or c
onge
stio
n m
anag
emen
t.
Cre
ate:
O
M
odif
y:P
P
ersi
sten
t
P
rofi
led
BO
OL
EA
Nfa
lse
"Use
GTS
" [c
vgts
]
Spe
cify
whe
ther
you
wan
t to
use
GT
S f
or c
onge
stio
n m
anag
emen
t.
Cre
ate:
O
M
odif
y:P
P
ersi
sten
t
P
rofi
led
BO
OL
EA
Nfa
lse
"Def
ault"
[cv
isde
faul
t]
Spe
cify
whe
ther
or
not
you
wan
t th
e C
oSP
rofi
le t
o be
par
t of
the
def
ault
CoS
-pro
file
set
.
Cre
ate:
O
M
odif
y:P
P
ersi
sten
t
P
rofi
led
BO
OL
EA
Nfa
lse
"Tra
ffic
Polic
ing"
[cv
polic
ing]
Spe
cify
the
req
uire
d tr
affi
c sh
apin
g pa
ram
eter
s.
Cre
ate:
O
M
odif
y:P
P
ersi
sten
t
P
rofi
led
Non
e |
CoS
App
lyP
olic
ing
| C
oSD
ropE
xces
sTra
ffic
Non
e
"Tra
ffic
Shap
ing"
[cv
shap
ing]
Spe
cify
the
req
uire
d tr
affi
c sh
apin
g pa
ram
eter
s.
Cre
ate:
O
M
odif
y:P
P
ersi
sten
t
P
rofi
led
Non
e |
CoS
App
lyS
hapi
ng |
CoS
Sha
peO
utO
fCon
tra
ctO
nly
Non
e
"Use
WRE
D"
[cvw
red]
Spe
cify
whe
ther
you
wan
t to
use
WR
ED
for
con
gest
ion
man
agem
ent.
Cre
ate:
O
M
odif
y:P
P
ersi
sten
t
P
rofi
led
BO
OL
EA
Nfa
lse
"MD
" [d
omai
n]
Thi
s is
the
man
agem
ent
dom
ain
nam
e. I
t id
enti
fies
a g
eogr
aphi
cal
or o
rgan
izat
iona
l sc
ope
for
oper
ator
acc
ess
cont
rol
and
corr
espo
nds
to t
he M
D t
ag w
ithi
n th
e C
isco
Pro
visi
onin
g C
ente
r se
curi
ty p
roce
dure
.
Cre
ate:
O
M
odif
y:O
P
ersi
sten
t
P
rofi
led
Text
(16
)""
Tab
leA
-17
VP
N C
oS
- a
ttri
bu
tes (
co
nti
nu
ed
)
Attr
ibut
esA
ccep
tabl
e Va
lues
Def
ault
Valu
es
A-19Cisco VPN Solutions Center Equipment Module Configuration Guide
OL-1816-02
Appendix A Attribute ReferenceVPN CoS
"Nam
e" [
srna
me]
Spe
cify
the
net
wor
k na
me.
Thi
s na
me
mus
t be
uni
que
wit
hin
the
CV
net
wor
k.
Cre
ate:
O
M
odif
y:P
P
ersi
sten
t
P
rofi
led
Text
(32
)""
"VPN
" [v
pn]
Spe
cify
the
cus
tom
er n
ame.
The
cus
tom
er f
ield
, lik
e th
e D
omai
n fi
eld,
is
used
for
Cis
co
Pro
visi
onin
g C
ente
r se
curi
ty p
urpo
ses.
It
iden
tifi
es t
he S
ervi
ce o
bjec
t w
ith
a cu
stom
er a
nd i
s us
ed a
s a
tag
to g
ive
oper
ator
s ac
cess
to
this
cus
tom
er’s
Ser
vice
obj
ect.
Cre
ate:
O
M
odif
y:O
P
ersi
sten
t
P
rofi
led
Text
(16
)""
Tab
leA
-17
VP
N C
oS
- a
ttri
bu
tes (
co
nti
nu
ed
)
Attr
ibut
esA
ccep
tabl
e Va
lues
Def
ault
Valu
es
A-20Cisco VPN Solutions Center Equipment Module Configuration Guide
OL-1816-02
Appendix A Attribute ReferenceVPN CoS Class
VPN
CoS
Cla
ss
Ob
ject
Cla
ss:
CV
cbC
oSC
lass
Fil
e N
ame:
CV
cbC
oSC
lass
.oaf
Tab
leA
-18
VP
N C
oS
Cla
ss -
ch
ara
cte
risti
cs
Cla
ss N
ame:
CV
cbC
oSC
lass
Sho
rt C
lass
Nam
e:cb
Cla
ss L
abel
:C
isco
VP
N C
oSC
lass
Sup
ercl
ass:
Per
sist
ence
:O
WN
Tab
leA
-19
VP
N C
oS
Cla
ss -
att
rib
ute
s
Attr
ibut
esA
ccep
tabl
e Va
lues
Def
ault
Valu
es
"CE
- PE
Rate
" [c
vcep
erat
e]
Spe
cify
the
rat
e li
mit
fro
m C
E t
o P
E.
Cre
ate:
O
M
odif
y:P
P
ersi
sten
t
P
rofi
led
0 -
2147
4836
470
"CoS
" [c
vcos
.srn
ame]
Thi
s th
e C
oS t
hat
cont
ains
thi
s cl
ass.
Cre
ate:
O
M
odif
y:P
P
ersi
sten
t
Text
(32
)""
"Pre
cede
nce"
[cv
cosp
rece
denc
e]
Spe
cify
the
pre
cede
nce
num
ber
of t
his
CoS
Cla
ss.
Cre
ate:
O
M
odif
y:P
P
ersi
sten
t
P
rofi
led
0 -
2147
4836
470
"Exc
eed
Act
ion"
[cv
exce
edac
tion]
Spe
cify
the
exc
eed
acti
on f
or t
his
CoS
Cla
ss.
Cre
ate:
O
M
odif
y:P
P
ersi
sten
t
P
rofi
led
Act
ionD
rop
| A
ctio
nRep
aint
Tra
nsm
itA
ctio
nDro
p
"Fla
g" [
cvfla
g]
Thi
s at
trib
ute
is n
ot c
urre
ntly
use
d by
the
Cis
co V
PN
Sol
utio
n C
ente
r E
quip
men
t M
odul
e.
Cre
ate:
O
M
odif
y:P
P
ersi
sten
t
P
rofi
led
0 -
2147
4836
470
A-21Cisco VPN Solutions Center Equipment Module Configuration Guide
OL-1816-02
Appendix A Attribute ReferenceVPN CoS Class
"PE
- CE
Rate
" [c
vpec
erat
e]
Spe
cify
the
rat
e li
mit
fro
m P
E t
o C
E.
Cre
ate:
O
M
odif
y:P
P
ersi
sten
t
P
rofi
led
0 -
2147
4836
470
"MD
" [d
omai
n]
Thi
s is
the
man
agem
ent
dom
ain
nam
e. I
t id
enti
fies
a g
eogr
aphi
cal
or o
rgan
izat
iona
l sc
ope
for
oper
ator
acc
ess
cont
rol
and
corr
espo
nds
to t
he M
D t
ag w
ithi
n th
e C
isco
Pro
visi
onin
g C
ente
r se
curi
ty p
roce
dure
.
Cre
ate:
O
M
odif
y:O
P
ersi
sten
t
P
rofi
led
Text
(16
)""
"Nam
e" [
srna
me]
Spe
cify
the
net
wor
k na
me.
Thi
s na
me
mus
t be
uni
que
wit
hin
the
CV
net
wor
k.
Cre
ate:
O
M
odif
y:P
P
ersi
sten
t
P
rofi
led
Text
(64
)""
"VPN
" [v
pn]
Spe
cify
the
cus
tom
er n
ame.
The
cus
tom
er f
ield
, lik
e th
e D
omai
n fi
eld,
is
used
for
Cis
co
Pro
visi
onin
g C
ente
r se
curi
ty p
urpo
ses.
It
iden
tifi
es t
he S
ervi
ce o
bjec
t w
ith
a cu
stom
er a
nd i
s us
ed a
s a
tag
to g
ive
oper
ator
s ac
cess
to
this
cus
tom
er’s
Ser
vice
obj
ect.
Cre
ate:
O
M
odif
y:O
P
ersi
sten
t
P
rofi
led
Text
(16
)""
Tab
leA
-19
VP
N C
oS
Cla
ss -
att
rib
ute
s (
co
nti
nu
ed
)
Attr
ibut
esA
ccep
tabl
e Va
lues
Def
ault
Valu
es
A-22Cisco VPN Solutions Center Equipment Module Configuration Guide
OL-1816-02
Appendix A Attribute ReferenceVPN
VPN
O
bje
ct C
lass
: C
Vvn
VP
N
Fil
e N
ame:
CV
vnV
PN
.oaf
Tab
leA
-20
VP
N -
ch
ara
cte
risti
cs
Cla
ss N
ame:
CV
vnV
PN
Sho
rt C
lass
Nam
e:vn
Cla
ss L
abel
:C
isco
VP
N V
PN
Sup
ercl
ass:
Per
sist
ence
:O
WN
Tab
leA
-21
VP
N -
att
rib
ute
s
Attr
ibut
esA
ccep
tabl
e Va
lues
Def
ault
Valu
es
"Adm
inD
omai
n" [
cvad
min
dom
ain.
srna
me]
Thi
s is
the
adm
inis
trat
ive
dom
ain
that
con
tain
s th
is V
PN
.
Cre
ate:
O
M
odif
y:P
P
ersi
sten
t
Text
(32
)""
"MD
" [d
omai
n]
Thi
s is
the
man
agem
ent
dom
ain
nam
e. I
t id
enti
fies
a g
eogr
aphi
cal
or o
rgan
izat
iona
l sc
ope
for
oper
ator
acc
ess
cont
rol
and
corr
espo
nds
to t
he M
D t
ag w
ithi
n th
e C
isco
Pro
visi
onin
g C
ente
r se
curi
ty p
roce
dure
.
Cre
ate:
O
M
odif
y:O
P
ersi
sten
t
P
rofi
led
Text
(16
)""
"Nam
e" [
srna
me]
Spe
cify
the
net
wor
k na
me.
Thi
s na
me
mus
t be
uni
que
wit
hin
the
CV
net
wor
k.
Cre
ate:
O
M
odif
y:P
P
ersi
sten
t
P
rofi
led
Text
(64
)""
A-23Cisco VPN Solutions Center Equipment Module Configuration Guide
OL-1816-02
Appendix A Attribute ReferenceVPN
"SRS
OID
" [s
rsoi
d]
Rel
atio
n of
Typ
e O
PT
ION
AL
, Rel
atio
n C
lass
Nam
e =
SR
soS
ervi
ceO
bjec
t
The
obj
ect
ID o
f th
e pa
rent
ser
vice
.
Cre
ate:
O
M
odif
y:O
"VPN
" [v
pn]
Spe
cify
the
cus
tom
er n
ame.
The
cus
tom
er f
ield
, lik
e th
e D
omai
n fi
eld,
is
used
for
Cis
co
Pro
visi
onin
g C
ente
r se
curi
ty p
urpo
ses.
It
iden
tifi
es t
he S
ervi
ce o
bjec
t w
ith
a cu
stom
er a
nd i
s us
ed a
s a
tag
to g
ive
oper
ator
s ac
cess
to
this
cus
tom
er’s
Ser
vice
obj
ect.
Cre
ate:
O
M
odif
y:O
P
ersi
sten
t
P
rofi
led
Text
(16
)""
Tab
leA
-21
VP
N -
att
rib
ute
s (
co
nti
nu
ed
)
Attr
ibut
esA
ccep
tabl
e Va
lues
Def
ault
Valu
es
A-24Cisco VPN Solutions Center Equipment Module Configuration Guide
OL-1816-02
Appendix A Attribute ReferenceVPN CERC
VPN
CER
C O
bje
ct C
lass
: C
Vrr
CE
RC
Fil
e N
ame:
CV
rrC
ER
C.o
af
Tab
leA
-22
VP
N C
ER
C -
ch
ara
cte
risti
cs
Cla
ss N
ame:
CV
rrC
ER
C
Sho
rt C
lass
Nam
e:rr
Cla
ss L
abel
:C
isco
VP
N C
ER
C
Sup
ercl
ass:
Per
sist
ence
:O
WN
Tab
leA
-23
VP
N C
ER
C -
att
rib
ute
s
Attr
ibut
esA
ccep
tabl
e Va
lues
Def
ault
Valu
es
"Aut
o Pi
ck R
T Va
lue"
[cv
auto
pick
rt]
Whe
n th
is a
ttri
bute
is
set
to T
rue,
ass
umin
g a
hub-
and-
spok
e C
ER
C c
onfi
gura
tion
is
used
, in
dica
tes
that
rou
te-t
arge
t (R
T)
valu
es f
or b
oth
the
hub
and
spok
e ro
uter
s ar
e to
be
auto
mat
ical
ly
sele
cted
.
Hub
RT
and
Spo
ke R
T b
ecom
e m
anda
tory
if
Aut
oPic
k R
T v
alue
is
set
to F
alse
.
Cre
ate:
O
M
odif
y:P
P
ersi
sten
t
P
rofi
led
BO
OL
EA
Ntr
ue
"Des
crip
tion"
[cv
desc
]
Ent
er a
des
crip
tion
of
the
CE
rou
ting
com
mun
ity.
Cre
ate:
O
M
odif
y:P
P
ersi
sten
t
P
rofi
led
Text
(64
)""
"Hub
RT"
[cv
hubr
oute
targ
et]
Spe
cify
the
rout
e-ta
rget
(R
T)
valu
e to
be
appl
ied
to th
e hu
b ro
uter
of
the
CE
rou
ting
com
mun
ity
(CE
RC
).
Hub
RT
and
Spo
ke R
T b
ecom
e m
anda
tory
if
Aut
oPic
k R
T v
alue
is
set
to F
alse
.
Cre
ate:
O
M
odif
y:P
P
ersi
sten
t
P
rofi
led
Text
(64
)""
"VPN
SC
ID"
[cvi
d]
Thi
s is
an
ID g
ener
ated
by
VP
N S
C.
Cre
ate:
P
M
odif
y:P
P
ersi
sten
t
P
rofi
led
Text
(12
)"0
"
A-25Cisco VPN Solutions Center Equipment Module Configuration Guide
OL-1816-02
Appendix A Attribute ReferenceVPN CERC
"Spo
ke R
T" [
cvsp
oker
teta
rget
]
Spe
cify
rou
te-t
arge
t (R
T)
valu
e to
be
appl
ied
to t
he s
poke
rou
ters
of
the
CE
rou
ting
co
mm
unit
y(C
ER
C).
Hub
RT
and
Spo
ke R
T b
ecom
e m
anda
tory
if
Aut
oPic
k R
T v
alue
is
set
to F
alse
.
Cre
ate:
O
M
odif
y:P
P
ersi
sten
t
P
rofi
led
Text
(64
)""
" " [
cvvp
n]
Rel
atio
n of
Typ
e PA
RE
NT,
Rel
atio
n C
lass
Nam
e =
CV
vnV
PN
Thi
s is
the
VP
N t
hat
cont
ains
thi
s C
ER
C.
Cre
ate:
O
M
odif
y:O
"VPN
" [c
vvpn
.srn
ame]
Spe
cify
the
VP
N t
hat
cont
ains
thi
s C
ER
C.
Cre
ate:
O
M
odif
y:P
P
ersi
sten
t
Text
(32
)""
"MD
" [d
omai
n]
Thi
s is
the
man
agem
ent
dom
ain
nam
e. I
t id
enti
fies
a g
eogr
aphi
cal
or o
rgan
izat
iona
l sc
ope
for
oper
ator
acc
ess
cont
rol
and
corr
espo
nds
to t
he M
D t
ag w
ithi
n th
e C
isco
Pro
visi
onin
g C
ente
r se
curi
ty p
roce
dure
.
Cre
ate:
O
M
odif
y:O
P
ersi
sten
t
P
rofi
led
Text
(16
)""
Nam
e [s
rnam
e]
Spe
cify
the
net
wor
k na
me.
Thi
s na
me
mus
t be
uni
que
wit
hin
the
CV
net
wor
k.
Text
Str
ing
(up
to 6
4 ch
arac
ters
)
"VPN
" [v
pn]
Spe
cify
the
cus
tom
er n
ame.
The
cus
tom
er f
ield
, lik
e th
e D
omai
n fi
eld,
is
used
for
Cis
co
Pro
visi
onin
g C
ente
r se
curi
ty p
urpo
ses.
It
iden
tifi
es t
he S
ervi
ce o
bjec
t w
ith
a cu
stom
er a
nd i
s us
ed a
s a
tag
to g
ive
oper
ator
s ac
cess
to
this
cus
tom
er’s
Ser
vice
obj
ect.
Cre
ate:
O
M
odif
y:O
P
ersi
sten
t
P
rofi
led
Text
(16
)""
Tab
leA
-23
VP
N C
ER
C -
att
rib
ute
s (
co
nti
nu
ed
)
Attr
ibut
esA
ccep
tabl
e Va
lues
Def
ault
Valu
es
A-26Cisco VPN Solutions Center Equipment Module Configuration Guide
OL-1816-02
Appendix A Attribute ReferenceVPN PE Router
VPN
PE
Rout
er
Ob
ject
Cla
ss:
CV
ptP
ER
oute
r
Fil
e N
ame:
CV
ptP
ER
oute
r.oa
f
Tab
leA
-24
VP
N P
E R
ou
ter
- ch
ara
cte
risti
cs
Cla
ss N
ame:
CV
ptP
ER
oute
r
Sho
rt C
lass
Nam
e:pt
Cla
ss L
abel
:C
isco
VP
N P
ER
oute
r
Sup
ercl
ass:
CV
zrR
oute
r
Per
sist
ence
:O
WN
Tab
leA
-25
VP
N P
E R
ou
ter
- att
rib
ute
s
Attr
ibut
esA
ccep
tabl
e Va
lues
Def
ault
Valu
es
"Ena
ble
Use
r Pas
swor
d" [
cven
able
pw]
Spe
cify
the
rou
ter
enab
le p
assw
ord.
Cre
ate:
O
M
odif
y:O
P
ersi
sten
t
P
rofi
led
Text
(64
)""
"Ena
ble
Use
r Id"
[cv
enab
leui
d]
Spe
cify
the
rou
ter
enab
le u
ser
ID.
Cre
ate:
O
M
odif
y:O
P
ersi
sten
t
P
rofi
led
Text
(64
)""
"VPN
SC
ID"
[cvi
d]
Thi
s is
an
ID g
ener
ated
by
VP
N S
C.
Cre
ate:
P
M
odif
y:P
P
ersi
sten
t
P
rofi
led
Text
(64
)"0
"
"Lev
el"
[cvl
evel
]
Spe
cify
the
pas
swor
d le
vel
in t
he m
ulti
-lev
el p
assw
ord
sche
me,
suc
h as
the
MG
X s
wit
ch.
Cre
ate:
O
M
odif
y:O
P
ersi
sten
t
P
rofi
led
0 -
2147
4836
470
"Log
in U
ser P
assw
ord"
[cv
logi
npw
]
Spe
cify
the
rou
ter
logi
n pa
ssw
ord.
Cre
ate:
O
M
odif
y:O
P
ersi
sten
t
P
rofi
led
Text
(64
)""
A-27Cisco VPN Solutions Center Equipment Module Configuration Guide
OL-1816-02
Appendix A Attribute ReferenceVPN PE Router
"Log
in U
ser I
d" [
cvlo
ginu
id]
Spe
cify
the
rou
ter
logi
n us
er I
D.
Cre
ate:
O
M
odif
y:O
P
ersi
sten
t
P
rofi
led
Text
(64
)""
"VPN
SC R
egio
n" [
cvre
gion
.srn
ame]
Thi
s th
e re
gion
tha
t co
ntai
ns t
his
PE
rou
ter.
Cre
ate:
O
M
odif
y:P
P
ersi
sten
t
Text
(32
)""
"SN
MP
RO C
omm
unity
" [c
vsnm
proc
omm
]
Spe
cify
the
SN
MP
rea
d-on
ly c
omm
unit
y at
trib
ute.
Cre
ate:
O
M
odif
y:O
P
ersi
sten
t
P
rofi
led
Text
(64
)""
"SN
MP
RW C
omm
unity
" [c
vsnm
prw
com
m]
Spe
cify
the
SN
MP
rea
d-w
rite
com
mun
ity
attr
ibut
e.
Cre
ate:
O
M
odif
y:O
P
ersi
sten
t
P
rofi
led
Text
(64
)""
"Num
ber O
f Ret
ries
" [c
vtel
netr
etri
es]
Spe
cify
the
num
ber
of t
imes
to
re-t
ry t
he T
elne
t (S
NM
P)c
onne
ctio
n.
Cre
ate:
O
M
odif
y:O
P
ersi
sten
t
P
rofi
led
1 -
5910
"Sec
onds
Bet
wee
n Re
trie
s" [
cvte
lnet
timeo
ut]
Spe
cify
the
dur
atio
n in
sec
onds
, bet
wee
n re
-try
att
empt
s.
Cre
ate:
O
M
odif
y:O
P
ersi
sten
t
P
rofi
led
0 -
2147
4836
4715
"Dom
ain"
[do
mai
n]
Thi
s is
the
man
agem
ent
dom
ain
nam
e. I
t id
enti
fies
a g
eogr
aphi
cal
or o
rgan
izat
iona
l sc
ope
for
oper
ator
acc
ess
cont
rol
and
corr
espo
nds
to t
he M
D t
ag w
ithi
n th
e C
isco
Pro
visi
onin
g C
ente
r se
curi
ty p
roce
dure
.
Cre
ate:
O
M
odif
y:O
P
ersi
sten
t
P
rofi
led
Text
(16
)""
"Reg
ion"
[sr
area
]
The
nam
e of
the
adm
inis
trat
ive
area
con
tain
ing
the
node
(a
LA
TA, f
or e
xam
ple)
. Thi
s at
trib
ute
can
be u
sed
to p
arti
tion
you
net
wor
k fo
r pa
rtia
l se
rvic
e di
scov
ery.
Cre
ate:
O
M
odif
y:O
P
ersi
sten
t
P
rofi
led
Text
(32
)""
"Cla
ss"
[src
lass
]
The
Cis
co P
rovi
sion
ing
Cen
ter
clas
s na
me
for
the
netw
ork
obje
ct.
Cre
ate:
P
M
odif
y:P
P
ersi
sten
t
P
rofi
led
Text
(4)
"CV
pt"
Tab
leA
-25
VP
N P
E R
ou
ter
- att
rib
ute
s (
co
nti
nu
ed
)
Attr
ibut
esA
ccep
tabl
e Va
lues
Def
ault
Valu
es
A-28Cisco VPN Solutions Center Equipment Module Configuration Guide
OL-1816-02
Appendix A Attribute ReferenceVPN PE Router
"Tra
nsit
Cost
" [s
rcos
t]
Thi
s is
the
cost
of
cros
sing
the
sub-
netw
ork.
Thi
s at
trib
ute
is u
sed
by th
e T
hrea
der
to d
eter
min
e th
e lo
wes
t co
st p
ath
whe
n th
read
ing
a se
rvic
e.
Cre
ate:
O
M
odif
y:O
P
ersi
sten
t
P
rofi
led
0 -
2147
4836
4710
0
"Geo
grap
hica
l Loc
atio
n" [
srge
oglo
c]
Thi
s is
the
geo
grap
hica
l lo
cati
on o
f th
e no
de (
for
exam
ple,
a G
PS
ref
eren
ce).
Cre
ate:
O
M
odif
y:O
P
ersi
sten
t
P
rofi
led
Text
(32
)""
"Loc
ked
agai
nst D
elet
ion"
[sr
lock
ed]
Thi
s at
trib
ute
is u
sed
to m
ark
an o
bjec
t so
tha
t it
can
not
be a
ccid
enta
lly
dele
ted.
It
is u
sed
as
foll
ows:
Whe
n sr
lock
ed =
fal
se th
e no
rmal
beh
avio
r ap
plie
s (e
.g.,
the
obje
ct c
anno
t be
dele
ted
whe
n it
is
pend
ing
in a
noth
er tr
ansa
ctio
n, e
tc.)
. Hen
ce u
nder
mos
t sit
uati
ons
it w
ill b
e po
ssib
le to
del
ete
the
obje
ct.
Whe
n sr
lock
ed =
true
the
obje
ct's
ow
ner
(EM
or
SA
) w
ill r
ejec
t any
att
empt
to d
elet
e th
e ob
ject
. T
his
over
ride
s th
e no
rmal
beh
avio
r.
Cre
ate:
O
M
odif
y:O
P
ersi
sten
t
P
rofi
led
BO
OL
EA
Nfa
lse
"Man
agem
ent A
ddre
ss"
[srm
gmta
ddre
ss]
Thi
s at
trib
ute
is n
ot a
ppli
cabl
e as
man
agem
ent
info
rmat
ion
is s
tore
d in
the
con
tain
ing
netw
ork.
Cre
ate:
O
M
odif
y:O
P
ersi
sten
t
Text
(32
)""
"Nam
e" [
srna
me]
Spe
cify
the
net
wor
k na
me.
Thi
s na
me
mus
t be
uni
que
wit
hin
the
CV
net
wor
k.
Cre
ate:
O
M
odif
y:P
P
ersi
sten
t
Text
(64
)""
"VPN
Net
wor
k" [
srne
twor
k.sr
nam
e]
Thi
s th
e ne
twor
k ob
ject
tha
t co
ntai
ns t
his
PE
rou
ter.
Cre
ate:
O
M
odif
y:P
P
ersi
sten
t
Text
(32
)""
"Org
aniz
atio
nal L
ocat
ion"
[sr
orgl
oc]
Thi
s is
the
org
aniz
atio
nal
loca
tion
of
the
node
(fo
r ex
ampl
e, a
n X
.500
dir
ecto
ry r
efer
ence
).
Cre
ate:
O
M
odif
y:O
P
ersi
sten
t
P
rofi
led
Text
(64
)""
Tab
leA
-25
VP
N P
E R
ou
ter
- att
rib
ute
s (
co
nti
nu
ed
)
Attr
ibut
esA
ccep
tabl
e Va
lues
Def
ault
Valu
es
A-29Cisco VPN Solutions Center Equipment Module Configuration Guide
OL-1816-02
Appendix A Attribute ReferenceVPN PE Router
"Pre
-pro
visi
oned
" [s
rpre
prov
]
Indi
cate
s if
the
obj
ect
is p
re-p
rovi
sion
ed o
r no
t. T
he d
efau
lt v
alue
is
Non
e, i
ndic
atin
g th
at t
he
node
obj
ect i
s no
t pre
-pro
visi
oned
. If
Ful
l or
Init
is s
elec
ted,
exi
stin
g S
ervi
ce E
lem
ents
(SE
s) c
an
be u
sed
by n
ew S
ervi
ce O
bjec
ts. T
he T
hrea
der w
ill a
ssig
n th
e pr
oper
SE
that
mat
ches
the
Ser
vice
O
bjec
t cri
teri
a. I
n In
it m
ode,
if
a su
itab
le e
xist
ing
SE
is n
ot f
ound
, the
Thr
eade
r w
ill
atte
mpt
to
crea
te o
ne f
or t
he S
ervi
ce O
bjec
t. I
n F
ull
mod
e, i
f a
suit
able
exi
stin
g S
E i
s no
t fo
unds
, the
T
hrea
der
wil
l no
t cr
eate
one
and
rep
ort
an e
rror
. Thi
s at
trib
ute
is e
ffec
tive
onl
y w
hen
Opa
que
attr
ibut
e (a
bove
) is
TR
UE
. Thi
s E
quip
men
t M
odul
e on
ly s
uppo
rts
Non
e or
Ful
l m
ode.
Cre
ate:
O
M
odif
y:O
P
ersi
sten
t
P
rofi
led
Ful
l | I
nit
| Non
eN
one
"Pro
file"
[sr
prof
ile]
Rel
atio
n of
Typ
e P
RO
FIL
E, R
elat
ion
Cla
ss N
ame
= C
Vpt
PE
Rou
terP
rof
Spe
cify
the
nam
e of
the
pro
file
to
be u
sed
whe
n cr
eati
ng t
his
obje
ct.
Cre
ate:
O
M
odif
y:O
"Age
nt S
/W V
ersi
on"
[srs
wve
rsio
n]
Spe
cify
the
ID
of
soft
war
e ru
nnin
g on
the
nod
e (e
.g.,
nam
e &
ver
sion
).
Cre
ate:
O
M
odif
y:O
P
ersi
sten
t
P
rofi
led
Text
(50
)""
"Nod
e Ty
pe"
[srt
ype]
Spe
cify
the
typ
e of
nod
e th
at y
ou a
re u
sing
.
Cre
ate:
O
M
odif
y:O
P
ersi
sten
t
P
rofi
led
Text
(24
)"P
E"
"Las
t Upl
oad"
[sr
urid
]
Rel
atio
n of
Typ
e O
PT
ION
AL
, Rel
atio
n C
lass
Nam
e =
AN
YC
LA
SS
Thi
s th
e up
load
req
uest
ID
of
the
last
upl
oad.
Cre
ate:
O
M
odif
y:O
"Use
r Lab
el"
[sru
serl
abel
]
The
sru
serl
abel
att
ribu
te is
a f
ree-
form
at te
xt f
ield
that
can
be
used
to h
old
any
text
str
ing,
and
is
inte
nded
as
a pl
ace
whe
re a
cus
tom
er c
an s
tore
OS
S-s
peci
fic
info
rmat
ion.
Cre
ate:
O
M
odif
y:O
P
ersi
sten
t
P
rofi
led
Text
(64
)""
Tab
leA
-25
VP
N P
E R
ou
ter
- att
rib
ute
s (
co
nti
nu
ed
)
Attr
ibut
esA
ccep
tabl
e Va
lues
Def
ault
Valu
es
A-30Cisco VPN Solutions Center Equipment Module Configuration Guide
OL-1816-02
Appendix A Attribute ReferenceVPN PE Router
"Upl
oad
Stat
us"
[sru
stat
e]
Thi
s at
trib
ute
indi
cate
s w
hen
a no
de s
houl
d be
upl
oade
d. A
suc
cess
ful
uplo
ad w
ill
caus
e th
is
attr
ibut
e to
be
set t
o N
ot_R
equi
red.
Cis
co P
rovi
sion
ing
Cen
ter
wil
l set
this
att
ribu
te to
Req
uire
d w
hen
it d
etec
ts t
hat
a fa
iled
tra
nsac
tion
can
not
roll
back
Req
uire
d in
dica
tes
that
the
node
def
init
ely
need
s up
load
ing.
Ind
eter
min
ate
mea
ns t
hat
the
node
m
ay n
eed
uplo
adin
g. N
ot_R
equi
red
indi
cate
s th
at t
he n
ode
does
not
nee
d up
load
ing.
Cre
ate:
O
M
odif
y:O
P
ersi
sten
t
P
rofi
led
Req
uire
d |
Not
_Req
uire
d |
Inde
term
inat
e
Req
uire
d
"Tim
e U
ploa
d St
atus
Las
t Cha
nged
" [s
rust
ime]
The
dat
e/ti
me
that
the
upl
oad
stat
e w
as l
ast
mod
ifie
d.
Cre
ate:
P
M
odif
y:P
P
ersi
sten
t
P
rofi
led
Text
(24
)""
"Tim
e of
Las
t Suc
cess
ful U
ploa
d" [
srut
ime]
The
dat
e/ti
me
that
the
suc
cess
ful
uplo
ad w
as p
erfo
rmed
.
Cre
ate:
P
M
odif
y:P
P
ersi
sten
t
P
rofi
led
Text
(24
)""
"Las
t Upl
oad
Type
" [s
ruty
pe]
The
typ
e of
the
las
t up
load
Cre
ate:
P
M
odif
y:P
P
ersi
sten
t
P
rofi
led
Text
(16
)""
"Cus
tom
er"
[vpn
]
Spe
cify
the
cus
tom
er n
ame.
The
cus
tom
er f
ield
, lik
e th
e D
omai
n fi
eld,
is
used
for
Cis
co
Pro
visi
onin
g C
ente
r se
curi
ty p
urpo
ses.
It
iden
tifi
es t
he S
ervi
ce o
bjec
t w
ith
a cu
stom
er a
nd i
s us
ed a
s a
tag
to g
ive
oper
ator
s ac
cess
to
this
cus
tom
er’s
Ser
vice
obj
ect.
Cre
ate:
O
M
odif
y:O
P
ersi
sten
t
P
rofi
led
Text
(16
)""
Tab
leA
-25
VP
N P
E R
ou
ter
- att
rib
ute
s (
co
nti
nu
ed
)
Attr
ibut
esA
ccep
tabl
e Va
lues
Def
ault
Valu
es
A-31Cisco VPN Solutions Center Equipment Module Configuration Guide
OL-1816-02
Appendix A Attribute ReferenceVPN CE Router
VPN
CE
Rout
er
Ob
ject
Cla
ss:
CV
ctC
ER
oute
r
Fil
e N
ame:
CV
ctC
ER
oute
r.oa
f
Tab
leA
-26
VP
N C
E R
ou
ter
- ch
ara
cte
risti
cs
Cla
ss N
ame:
CV
ctC
ER
oute
r
Sho
rt C
lass
Nam
e:ct
Cla
ss L
abel
:C
isco
VP
N C
ER
oute
r
Sup
ercl
ass:
CV
zrR
oute
r
Per
sist
ence
:O
WN
Tab
leA
-27
VP
N C
E R
ou
ter
- att
rib
ute
s
Attr
ibut
esA
ccep
tabl
e Va
lues
Def
ault
Valu
es
"E-M
ail A
ddre
ss"
[cve
mai
l]
Spe
cify
the
e-m
ail
addr
ess
for
unm
anag
ed C
E r
oute
rs.
Cre
ate:
O
M
odif
y:O
P
ersi
sten
t
P
rofi
led
Text
(64
)""
"Ena
ble
Use
r Pas
swor
d" [
cven
able
pw]
Spe
cify
the
rou
ter
enab
le p
assw
ord.
Cre
ate:
O
M
odif
y:O
P
ersi
sten
t
P
rofi
led
Text
(64
)""
"Ena
ble
Use
r Id"
[cv
enab
leui
d]
Spe
cify
the
rou
ter
enab
le u
ser
ID.
Cre
ate:
O
M
odif
y:O
P
ersi
sten
t
P
rofi
led
Text
(64
)""
"VPN
SC
ID"
[cvi
d]
Thi
s is
an
ID g
ener
ated
by
VP
N S
C.
Cre
ate:
P
M
odif
y:P
P
ersi
sten
t
P
rofi
led
Text
(64
)"0
"
"Lev
el"
[cvl
evel
]
Spe
cify
the
pas
swor
d le
vel
in t
he m
ulti
-lev
el p
assw
ord
sche
me.
Cre
ate:
O
M
odif
y:O
P
ersi
sten
t
P
rofi
led
0 -
2147
4836
470
A-32Cisco VPN Solutions Center Equipment Module Configuration Guide
OL-1816-02
Appendix A Attribute ReferenceVPN CE Router
"Log
in U
ser P
assw
ord"
[cv
logi
npw
]
Spe
cify
the
rou
ter
logi
n pa
ssw
ord.
Cre
ate:
O
M
odif
y:O
P
ersi
sten
t
P
rofi
led
Text
(64
)""
"Log
in U
ser I
d" [
cvlo
ginu
id]
Spe
cify
the
rou
ter
logi
n us
er I
D.
Cre
ate:
O
M
odif
y:O
P
ersi
sten
t
P
rofi
led
Text
(64
)""
"Man
agem
ent T
ype"
[cv
mgm
ttype
]
Spe
cify
the
CE
rou
ter
man
agem
ent.
Cre
ate:
O
M
odif
y:O
P
ersi
sten
t
P
rofi
led
Oth
er |
Unm
anag
ed |
Man
aged
Reg
ular
| M
anag
edS
hado
w |
Man
aged
Mgm
tLan
| M
anag
edR
egul
arS
AA
| M
anag
edS
hado
wS
AA
| M
anag
edM
gmtL
anS
AA
| D
irec
tCon
nect
edR
egul
ar |
Dir
ectC
onne
cted
Mgm
tHos
t
Man
aged
Reg
ular
"VPN
SC C
usto
mer
" [c
vsite
.cvc
usto
mer
.srn
ame]
Thi
s is
the
con
tain
ing
cust
omer
rou
ter
Cre
ate:
P
M
odif
y:P
P
ersi
sten
t
Text
(32
)""
"Site
" [c
vsite
.srn
ame]
Thi
s th
e si
te t
hat
cont
ains
thi
s C
E r
oute
r.
Cre
ate:
O
M
odif
y:P
P
ersi
sten
t
Text
(32
)""
"SN
MP
RO C
omm
unity
" [c
vsnm
proc
omm
]
Spe
cify
the
SN
MP
rea
d-on
ly c
omm
unit
y at
trib
ute.
Cre
ate:
O
M
odif
y:O
P
ersi
sten
t
P
rofi
led
Text
(64
)""
"SN
MP
RW C
omm
unity
" [c
vsnm
prw
com
m]
Spe
cify
the
SN
MP
rea
d-w
rite
com
mun
ity
attr
ibut
e.
Cre
ate:
O
M
odif
y:O
P
ersi
sten
t
P
rofi
led
Text
(64
)""
"Num
ber O
f Ret
ries
" [c
vtel
netr
etri
es]
Spe
cify
the
num
ber
of t
imes
to
re-t
ry t
he T
elne
t (S
NM
P)
conn
ecti
on.
Cre
ate:
O
M
odif
y:O
P
ersi
sten
t
P
rofi
led
1 -
5910
Tab
leA
-27
VP
N C
E R
ou
ter
- att
rib
ute
s (
co
nti
nu
ed
)
Attr
ibut
esA
ccep
tabl
e Va
lues
Def
ault
Valu
es
A-33Cisco VPN Solutions Center Equipment Module Configuration Guide
OL-1816-02
Appendix A Attribute ReferenceVPN CE Router
"Sec
onds
Bet
wee
n Re
trie
s" [
cvte
lnet
timeo
ut]
Spe
cify
the
dur
atio
n in
sec
onds
, bet
wee
n re
-try
att
empt
s.
Cre
ate:
O
M
odif
y:O
P
ersi
sten
t
P
rofi
led
0 -
2147
4836
4715
"Dom
ain"
[do
mai
n]
Thi
s is
the
man
agem
ent
dom
ain
nam
e. I
t id
enti
fies
a g
eogr
aphi
cal
or o
rgan
izat
iona
l sc
ope
for
oper
ator
acc
ess
cont
rol
and
corr
espo
nds
to t
he M
D t
ag w
ithi
n th
e C
isco
Pro
visi
onin
g C
ente
r se
curi
ty p
roce
dure
.
Cre
ate:
O
M
odif
y:O
P
ersi
sten
t
P
rofi
led
Text
(16
)""
"Reg
ion"
[sr
area
]
The
nam
e of
the
adm
inis
trat
ive
area
con
tain
ing
the
node
(a
LA
TA, f
or e
xam
ple)
. Thi
s at
trib
ute
can
be u
sed
to p
arti
tion
you
net
wor
k fo
r pa
rtia
l se
rvic
e di
scov
ery.
Cre
ate:
O
M
odif
y:O
P
ersi
sten
t
P
rofi
led
Text
(32
)""
"Cla
ss"
[src
lass
]
The
Cis
co P
rovi
sion
ing
Cen
ter
clas
s na
me
for
the
netw
ork
obje
ct.
Cre
ate:
P
M
odif
y:P
P
ersi
sten
t
P
rofi
led
Text
(4)
"CV
ct"
"Tra
nsit
Cost
" [s
rcos
t]
Thi
s is
the
cost
of
cros
sing
the
sub-
netw
ork.
Thi
s at
trib
ute
is u
sed
by th
e T
hrea
der
to d
eter
min
e th
e lo
wes
t co
st p
ath
whe
n th
read
ing
a se
rvic
e.
Cre
ate:
O
M
odif
y:O
P
ersi
sten
t
P
rofi
led
0 -
2147
4836
4710
0
"Geo
grap
hica
l Loc
atio
n" [
srge
oglo
c]
Thi
s is
the
geo
grap
hica
l lo
cati
on o
f th
e no
de (
for
exam
ple,
a G
PS
ref
eren
ce).
Cre
ate:
O
M
odif
y:O
P
ersi
sten
t
P
rofi
led
Text
(32
)""
"Loc
ked
agai
nst D
elet
ion"
[sr
lock
ed]
Thi
s at
trib
ute
is u
sed
to m
ark
an o
bjec
t so
tha
t it
can
not
be a
ccid
enta
lly
dele
ted.
It
is u
sed
as
foll
ows:
Whe
n sr
lock
ed =
fal
se th
e no
rmal
beh
avio
r ap
plie
s (e
.g.,
the
obje
ct c
anno
t be
dele
ted
whe
n it
is
pend
ing
in a
noth
er tr
ansa
ctio
n, e
tc.)
. Hen
ce u
nder
mos
t sit
uati
ons
it w
ill b
e po
ssib
le to
del
ete
the
obje
ct.
Whe
n sr
lock
ed =
true
the
obje
ct's
ow
ner
(EM
or
SA
) w
ill r
ejec
t any
att
empt
to d
elet
e th
e ob
ject
. T
his
over
ride
s th
e no
rmal
beh
avio
r.
Cre
ate:
O
M
odif
y:O
P
ersi
sten
t
P
rofi
led
BO
OL
EA
Nfa
lse
Tab
leA
-27
VP
N C
E R
ou
ter
- att
rib
ute
s (
co
nti
nu
ed
)
Attr
ibut
esA
ccep
tabl
e Va
lues
Def
ault
Valu
es
A-34Cisco VPN Solutions Center Equipment Module Configuration Guide
OL-1816-02
Appendix A Attribute ReferenceVPN CE Router
"Man
agem
ent A
ddre
ss"
[srm
gmta
ddre
ss]
Thi
s at
trib
ute
is n
ot a
ppli
cabl
e as
man
agem
ent
info
rmat
ion
is s
tore
d in
the
con
tain
ing
netw
ork.
Cre
ate:
O
M
odif
y:O
P
ersi
sten
t
Text
(32
)""
"Nam
e" [
srna
me]
Spe
cify
the
net
wor
k na
me.
Thi
s na
me
mus
t be
uni
que
wit
hin
the
CV
net
wor
k.
Cre
ate:
O
M
odif
y:P
P
ersi
sten
t
Text
(64
)""
"VPN
Net
wor
k" [
srne
twor
k.sr
nam
e]
Thi
s th
e ne
twor
k ob
ject
tha
t co
ntai
ns t
his
PE
rou
ter.
Cre
ate:
O
M
odif
y:P
P
ersi
sten
t
Text
(32
)""
"Org
aniz
atio
nal L
ocat
ion"
[sr
orgl
oc]
Thi
s is
the
org
aniz
atio
nal
loca
tion
of
the
node
(fo
r ex
ampl
e, a
n X
.500
dir
ecto
ry r
efer
ence
).
Cre
ate:
O
M
odif
y:O
P
ersi
sten
t
P
rofi
led
Text
(64
)""
"Pre
-pro
visi
oned
" [s
rpre
prov
]
Indi
cate
s if
the
obj
ect
is p
re-p
rovi
sion
ed o
r no
t. T
he d
efau
lt v
alue
is
Non
e, i
ndic
atin
g th
at t
he
node
obj
ect i
s no
t pre
-pro
visi
oned
. If
Ful
l or
Init
is s
elec
ted,
exi
stin
g S
ervi
ce E
lem
ents
(SE
s) c
an
be u
sed
by n
ew S
ervi
ce O
bjec
ts. T
he T
hrea
der w
ill a
ssig
n th
e pr
oper
SE
that
mat
ches
the
Ser
vice
O
bjec
t cri
teri
a. I
n In
it m
ode,
if
a su
itab
le e
xist
ing
SE
is n
ot f
ound
, the
Thr
eade
r w
ill
atte
mpt
to
crea
te o
ne f
or t
he S
ervi
ce O
bjec
t. I
n F
ull
mod
e, i
f a
suit
able
exi
stin
g S
E i
s no
t fo
unds
, the
T
hrea
der
wil
l no
t cr
eate
one
and
rep
ort
an e
rror
. Thi
s at
trib
ute
is e
ffec
tive
onl
y w
hen
Opa
que
attr
ibut
e (a
bove
) is
TR
UE
. Thi
s E
quip
men
t M
odul
e on
ly s
uppo
rts
Non
e or
Ful
l m
ode.
Cre
ate:
O
M
odif
y:O
P
ersi
sten
t
P
rofi
led
Ful
l | I
nit
| Non
eN
one
"Age
nt S
/W V
ersi
on"
[srs
wve
rsio
n]
Spe
cify
the
ID
of
soft
war
e ru
nnin
g on
the
nod
e (e
.g.,
nam
e &
ver
sion
).
Cre
ate:
O
M
odif
y:O
P
ersi
sten
t
P
rofi
led
Text
(50
)""
"Nod
e Ty
pe"
[srt
ype]
Spe
cify
the
typ
e of
nod
e th
at y
ou a
re u
sing
.
Cre
ate:
O
M
odif
y:O
P
ersi
sten
t
P
rofi
led
Text
(24
)"C
E"
"Las
t Upl
oad"
[sr
urid
]
Rel
atio
n of
Typ
e O
PT
ION
AL
, Rel
atio
n C
lass
Nam
e =
AN
YC
LA
SS
Thi
s th
e up
load
req
uest
ID
of
the
last
upl
oad.
Cre
ate:
O
M
odif
y:O
Tab
leA
-27
VP
N C
E R
ou
ter
- att
rib
ute
s (
co
nti
nu
ed
)
Attr
ibut
esA
ccep
tabl
e Va
lues
Def
ault
Valu
es
A-35Cisco VPN Solutions Center Equipment Module Configuration Guide
OL-1816-02
Appendix A Attribute ReferenceVPN CE Router
"Use
r Lab
el"
[sru
serl
abel
]
The
sru
serl
abel
att
ribu
te is
a f
ree-
form
at te
xt f
ield
that
can
be
used
to h
old
any
text
str
ing,
and
is
inte
nded
as
a pl
ace
whe
re a
cus
tom
er c
an s
tore
OS
S-s
peci
fic
info
rmat
ion.
Cre
ate:
O
M
odif
y:O
P
ersi
sten
t
P
rofi
led
Text
(64
)""
"Upl
oad
Stat
us"
[sru
stat
e]
Thi
s at
trib
ute
indi
cate
s w
hen
a no
de s
houl
d be
upl
oade
d. A
suc
cess
ful
uplo
ad w
ill
caus
e th
is
attr
ibut
e to
be
set t
o N
ot_R
equi
red.
Cis
co P
rovi
sion
ing
Cen
ter
wil
l set
this
att
ribu
te to
Req
uire
d w
hen
it d
etec
ts t
hat
a fa
iled
tra
nsac
tion
can
not
roll
back
Req
uire
d in
dica
tes
that
the
node
def
init
ely
need
s up
load
ing.
Ind
eter
min
ate
mea
ns t
hat
the
node
m
ay n
eed
uplo
adin
g. N
ot_R
equi
red
indi
cate
s th
at t
he n
ode
does
not
nee
d up
load
ing.
Cre
ate:
O
M
odif
y:O
P
ersi
sten
t
P
rofi
led
Req
uire
d | N
ot_R
equi
red
| In
dete
rmin
ate
Req
uire
d
"Tim
e U
ploa
d St
atus
Las
t Cha
nged
" [s
rust
ime]
The
dat
e/ti
me
that
the
upl
oad
stat
e w
as l
ast
mod
ifie
d.
Cre
ate:
P
M
odif
y:P
P
ersi
sten
t
P
rofi
led
Text
(24
)""
"Tim
e of
Las
t Suc
cess
ful U
ploa
d" [
srut
ime]
The
dat
e/ti
me
that
the
suc
cess
ful
uplo
ad w
as p
erfo
rmed
.
Cre
ate:
P
M
odif
y:P
P
ersi
sten
t
P
rofi
led
Text
(24
)""
"Las
t Upl
oad
Type
" [s
ruty
pe]
The
typ
e of
the
las
t up
load
Cre
ate:
P
M
odif
y:P
P
ersi
sten
t
P
rofi
led
Text
(16
)""
"Cus
tom
er"
[vpn
]
Spe
cify
the
cus
tom
er n
ame.
The
cus
tom
er f
ield
, lik
e th
e D
omai
n fi
eld,
is
used
for
Cis
co
Pro
visi
onin
g C
ente
r se
curi
ty p
urpo
ses.
It
iden
tifi
es t
he S
ervi
ce o
bjec
t w
ith
a cu
stom
er a
nd i
s us
ed a
s a
tag
to g
ive
oper
ator
s ac
cess
to
this
cus
tom
er’s
Ser
vice
obj
ect.
Cre
ate:
O
M
odif
y:O
P
ersi
sten
t
P
rofi
led
Text
(16
)""
Tab
leA
-27
VP
N C
E R
ou
ter
- att
rib
ute
s (
co
nti
nu
ed
)
Attr
ibut
esA
ccep
tabl
e Va
lues
Def
ault
Valu
es
A-36Cisco VPN Solutions Center Equipment Module Configuration Guide
OL-1816-02
Appendix A Attribute ReferenceVPN Physical Port
VPN
Phy
sica
l Por
t O
bje
ct C
lass
: C
Vpp
PP
ort
Fil
e N
ame:
CV
ppP
Por
t.oa
f
The
con
tent
s of
thi
s ta
ble
wil
l ch
ange
dep
endi
ng o
n th
e ty
pe o
f ph
ysic
al p
ort
you
have
upl
oade
d. T
he m
ost
basi
c se
t of
att
ribu
tes
have
bee
n de
scri
bed
belo
w.
For
a d
escr
ipti
on o
f ph
ysic
al p
orts
that
are
spe
cifi
c to
a p
arti
cula
r ty
pe o
f eq
uipm
ent,
ple
ase
refe
r to
the
conf
igur
atio
n gu
ide
for
that
eq
uipm
ent.
For
exa
mpl
e, f
or M
GX
phy
sica
l po
rts
refe
r to
the
Cis
co W
AN
Man
ager
Con
figu
rati
on G
uide
.
Tab
leA
-28
VP
N P
hy
sic
al
Po
rt -
ch
ara
cte
risti
cs
Cla
ss N
ame:
CV
ppP
Por
t
Sho
rt C
lass
Nam
e:pp
Cla
ss L
abel
:C
isco
VP
N P
Por
t
Sup
ercl
ass:
SR
ppP
hysi
calP
ort
Per
sist
ence
:O
WN
Tab
leA
-29
VP
N P
hy
sic
al
Po
rt -
att
rib
ute
s
Attr
ibut
esA
ccep
tabl
e Va
lues
Def
ault
Valu
es
"Dom
ain"
[do
mai
n]
Thi
s is
the
man
agem
ent
dom
ain
nam
e. I
t id
enti
fies
a g
eogr
aphi
cal
or o
rgan
izat
iona
l sc
ope
for
oper
ator
acc
ess
cont
rol
and
corr
espo
nds
to t
he M
D t
ag w
ithi
n th
e C
isco
Pro
visi
onin
g C
ente
r se
curi
ty p
roce
dure
.
Cre
ate:
O
M
odif
y:O
P
ersi
sten
t
P
rofi
led
Text
(16
)""
"Loc
al A
dmin
Sta
tus"
[sr
adm
inst
atus
]
Spe
cify
the
adm
inis
trat
ive
stat
us o
f th
is p
ort.
Cre
ate:
O
M
odif
y:O
P
ersi
sten
t
P
rofi
led
Loc
ked
| Unl
ocke
dU
nloc
ked
"Pro
visi
onab
le B
andw
idth
(kbi
ts/s
ec)"
[sr
band
wid
th]
The
tot
al b
andw
idth
of
the
phys
ical
por
t.
Cre
ate:
O
M
odif
y:O
P
ersi
sten
t
P
rofi
led
0 -
2147
4836
4710
000
"Cla
ss"
[src
lass
]
The
phy
sica
l po
rt c
lass
nam
e.
Cre
ate:
P
M
odif
y:P
P
ersi
sten
t
P
rofi
led
Text
(4)
"CV
pp"
A-37Cisco VPN Solutions Center Equipment Module Configuration Guide
OL-1816-02
Appendix A Attribute ReferenceVPN Physical Port
"Por
t Nam
e in
EM
S" [
srem
snam
e]
Thi
s at
trib
ute
can
be u
sed
to h
old
a se
cond
nam
e fo
r an
obj
ect t
o ac
com
mod
ate
diff
eren
t na
mes
in
Cis
co P
rovi
sion
ing
Cen
ter
and
in t
he N
ode/
EM
S/N
MS
.
Cre
ate:
O
M
odif
y:O
P
ersi
sten
t
Text
(64
)""
"Loc
ked
agai
nst D
elet
ion"
[sr
lock
ed]
Thi
s at
trib
ute
is u
sed
to m
ark
an o
bjec
t so
tha
t it
can
not
be a
ccid
enta
lly
dele
ted.
It
is u
sed
as
foll
ows:
Whe
n sr
lock
ed =
fal
se th
e no
rmal
beh
avio
r ap
plie
s (e
.g.,
the
obje
ct c
anno
t be
dele
ted
whe
n it
is
pend
ing
in a
noth
er tr
ansa
ctio
n, e
tc.)
. Hen
ce u
nder
mos
t sit
uati
ons
it w
ill b
e po
ssib
le to
del
ete
the
obje
ct.
Whe
n sr
lock
ed =
true
the
obje
ct's
ow
ner
(EM
or
SA
) w
ill r
ejec
t any
att
empt
to d
elet
e th
e ob
ject
. T
his
over
ride
s th
e no
rmal
beh
avio
r.
Cre
ate:
O
M
odif
y:O
P
ersi
sten
t
P
rofi
led
BO
OL
EA
Nfa
lse
"Max
imum
Cha
nnel
s" [
srm
axch
ans]
Thi
s th
e m
axim
um n
umbe
r of
cha
nnel
s on
thi
s po
rt.
Cre
ate:
O
M
odif
y:O
P
ersi
sten
t
P
rofi
led
0 -
2147
4836
470
"Max
PD
U S
ize
(byt
es)"
[sr
max
pdus
ize]
The
max
imum
pro
toco
l da
ta u
nit
size
.
Cre
ate:
O
M
odif
y:O
P
ersi
sten
t
P
rofi
led
0 -
2147
4836
470
"Nam
e" [
srna
me]
Spe
cify
the
net
wor
k na
me.
Thi
s na
me
mus
t be
uni
que
wit
hin
the
CV
net
wor
k.
Cre
ate:
O
M
odif
y:O
P
ersi
sten
t
Text
(64
)""
"Net
wor
k" [
srne
twor
k.sr
nam
e]
Thi
s is
the
nam
e of
the
net
wor
k co
ntai
ning
the
phy
sica
l po
rt.
Cre
ate:
O
M
odif
y:P
P
ersi
sten
t
Text
(32
)""
"Nod
e" [
srno
de.s
rnam
e]
Thi
s is
the
nam
e of
the
nod
e co
ntai
ning
the
phy
sica
l po
rt.
Cre
ate:
O
M
odif
y:P
P
ersi
sten
t
Text
(32
)""
"Pee
r Phy
sica
l Por
t" [
srpe
er.s
rnam
e]
Spe
cify
the
nam
e of
the
pee
r ph
ysic
al p
ort.
Cre
ate:
P
M
odif
y:P
P
ersi
sten
t
Text
(32
)""
Tab
leA
-29
VP
N P
hy
sic
al
Po
rt -
att
rib
ute
s (
co
nti
nu
ed
)
Attr
ibut
esA
ccep
tabl
e Va
lues
Def
ault
Valu
es
A-38Cisco VPN Solutions Center Equipment Module Configuration Guide
OL-1816-02
Appendix A Attribute ReferenceVPN Physical Port
"Por
t Num
ber"
[sr
port
num
ber]
Spe
cify
the
por
t nu
mbe
r th
at c
onta
ins
the
phys
ical
por
t.
Cre
ate:
O
M
odif
y:O
P
ersi
sten
t
0 -
2147
4836
470
"Por
t Typ
e" [
srpo
rtty
pe]
Spe
cify
the
typ
e of
phy
sica
l po
rt.
Cre
ate:
O
M
odif
y:O
P
ersi
sten
t
Unk
now
n | P
OS
| P
OS
_PP
P |
PO
S_H
DL
C
| PO
S_F
ram
eRel
ay |
Fast
Eth
erne
t |
Fast
Eth
erne
t_IS
L |
Eth
erne
t | S
eria
l |
Ser
ial_
PP
P |
Ser
ial_
Fra
meR
elay
| S
eria
l_H
DL
C |
AT
M |
HS
SI
| HS
SI_
HD
LC
| H
SS
I_P
PP
| H
SS
I_F
ram
eRel
ay |
FD
DI
| Gig
abit
Eth
erne
t | G
igab
itE
ther
net_
ISL
| W
AN
_Sw
itch
| P
OS
_Fra
meR
elay
_IE
TF
| S
eria
l_F
ram
eRel
ay_I
ET
F |
HS
SI_
Fra
meR
elay
_IE
TF
| C
able
"Unk
now
n"
"Pro
file"
[sr
prof
ile]
Rel
atio
n of
Typ
e P
RO
FIL
E, R
elat
ion
Cla
ss N
ame
= C
Vpp
PP
ortP
rof
Spe
cify
the
nam
e of
the
pro
file
to
be u
sed
whe
n cr
eati
ng t
his
obje
ct.
Cre
ate:
O
M
odif
y:O
"Pro
toco
l" [
srpr
otoc
ol]
Spe
cify
the
pro
toco
l ty
pe o
f th
is p
ort.
i.e
. AT
M F
R, e
tc.
Cre
ate:
O
M
odif
y:O
P
ersi
sten
t
P
rofi
led
LA
N |
Non
eN
one
"Res
ourc
e M
ap"
[srr
mm
ap]
The
thre
ader
wil
l use
the
srrm
map
set
ting
s in
the
Net
wor
k an
d th
e tw
o lo
gica
l por
ts to
det
erm
ine
wha
t ki
nds
of c
ircu
its
are
poss
ible
.
Cre
ate:
O
M
odif
y:O
P
ersi
sten
t
P
rofi
led
0 -
2147
4836
470
Tab
leA
-29
VP
N P
hy
sic
al
Po
rt -
att
rib
ute
s (
co
nti
nu
ed
)
Attr
ibut
esA
ccep
tabl
e Va
lues
Def
ault
Valu
es
A-39Cisco VPN Solutions Center Equipment Module Configuration Guide
OL-1816-02
Appendix A Attribute ReferenceVPN Physical Port
"She
lf an
d Sl
ot N
umbe
r" [
srsl
otnu
mbe
r]
Spe
cify
the
slo
t nu
mbe
r th
at c
onta
ins
the
phys
ical
por
t.
Cre
ate:
O
M
odif
y:O
P
ersi
sten
t
Text
(16
)""
"Fir
st C
hann
el o
n th
is P
port
" [s
rsta
rtch
an]
The
cha
nnel
num
ber
of f
irst
cha
nnel
on
this
por
t.
Cre
ate:
O
M
odif
y:O
P
ersi
sten
t
P
rofi
led
0 -
2147
4836
471
"Sub
scri
ber I
d" [
srsu
bscr
iber
id]
The
sub
scri
ber
ID.
Cre
ate:
O
M
odif
y:O
P
ersi
sten
t
Text
(32
)""
"Use
r Lab
el"
[sru
serl
abel
]
The
sru
serl
abel
att
ribu
te is
a f
ree-
form
at te
xt f
ield
that
can
be
used
to h
old
any
text
str
ing,
and
is
inte
nded
as
a pl
ace
whe
re a
cus
tom
er c
an s
tore
OS
S-s
peci
fic
info
rmat
ion.
Cre
ate:
O
M
odif
y:O
P
ersi
sten
t
P
rofi
led
Text
(64
)""
"Cus
tom
er"
[vpn
]
Spe
cify
the
cus
tom
er n
ame.
The
cus
tom
er f
ield
, lik
e th
e D
omai
n fi
eld,
is
used
for
Cis
co
Pro
visi
onin
g C
ente
r se
curi
ty p
urpo
ses.
It
iden
tifi
es t
he S
ervi
ce o
bjec
t w
ith
a cu
stom
er a
nd i
s us
ed a
s a
tag
to g
ive
oper
ator
s ac
cess
to
this
cus
tom
er’s
Ser
vice
obj
ect.
Cre
ate:
O
M
odif
y:O
P
ersi
sten
t
P
rofi
led
Text
(16
)""
Tab
leA
-29
VP
N P
hy
sic
al
Po
rt -
att
rib
ute
s (
co
nti
nu
ed
)
Attr
ibut
esA
ccep
tabl
e Va
lues
Def
ault
Valu
es
A-40Cisco VPN Solutions Center Equipment Module Configuration Guide
OL-1816-02
Appendix A Attribute ReferenceVPN ATM Logical Port
VPN
ATM
Log
ical
Por
t O
bje
ct C
lass
: C
Val
Atm
LP
ort
Fil
e N
ame:
CV
alA
tmL
Por
t.oa
f
Tab
leA
-30
VP
N A
TM
Lo
gic
al
Po
rt -
ch
ara
cte
risti
cs
Cla
ss N
ame:
CV
alA
tmL
Por
t
Sho
rt C
lass
Nam
e:al
Cla
ss L
abel
:C
isco
VP
N A
TM
Log
ical
Por
t
Sup
ercl
ass:
RA
Lpo
rt
Per
sist
ence
:O
WN
Tab
leA
-31
VP
N A
TM
Lo
gic
al
Po
rt -
att
rib
ute
s
Attr
ibut
e N
ame
Acc
epta
ble
Valu
esD
efau
lt Va
lue
"Dom
ain"
[do
mai
n]
Spe
cify
the
man
agem
ent
dom
ain.
Cre
ate:
O
M
odif
y:O
P
ersi
sten
t
P
rofi
led
Text
(16
)""
"Def
ault
ATM
Add
ress
" [r
aadd
ress
]
Spe
cify
the
tar
get
AT
M A
ddre
ss.
Cre
ate:
O
M
odif
y:O
P
ersi
sten
t
P
rofi
led
Text
(64
)""
"Def
ault
ATM
Add
ress
Typ
e" [
raad
dres
styp
e]
Spe
cify
the
def
ault
AT
M a
ddre
ss t
ype.
Cre
ate:
O
M
odif
y:O
P
ersi
sten
t
P
rofi
led
AE
SA
| E
.164
| P
riva
teP
riva
te
"ILM
I N49
1 Er
ror T
hres
hold
" [r
ailm
in49
1]
Spe
cify
the
err
or t
hres
hold
. The
num
ber
of k
eep
aliv
e po
lls
that
mus
t fa
il w
ithi
n a
win
dow
of
N49
2 po
lls,
bef
ore
the
port
is p
lace
d in
the
fail
ed s
tate
(N
491)
. Thi
s at
trib
ute
is a
ppli
cabl
e on
ly
whe
n th
e si
gnal
ling
pro
toco
l is
IL
MI.
Cre
ate:
O
M
odif
y:O
P
ersi
sten
t
P
rofi
led
0 -
2147
4836
470
A-41Cisco VPN Solutions Center Equipment Module Configuration Guide
OL-1816-02
Appendix A Attribute ReferenceVPN ATM Logical Port
"ILM
I N49
2 Ev
ent T
hres
hold
" [r
ailm
in49
2]
Spe
cify
the
even
t thr
esho
ld. S
peci
fies
the
num
ber
of k
eep
aliv
e po
lls
wit
hin
whi
ch, i
f N
491
poll
s fa
il t
he p
ort
is p
lace
d in
the
fai
led
stat
e (N
492)
. Thi
s at
trib
ute
is a
ppli
cabl
e on
ly w
hen
the
sign
alli
ng p
roto
col
is I
LM
I.
Cre
ate:
O
M
odif
y:O
P
ersi
sten
t
P
rofi
led
0 -
2147
4836
470
"ILM
I T49
1 Po
lling
Inte
rval
" [r
ailm
it491
]
Spe
cify
the
num
ber
of s
econ
ds b
etw
een
each
kee
p al
ive
poll
tran
smit
ted
by th
e po
rt (
T49
1). T
he
inte
rval
has
to b
e an
inte
gral
mul
tipl
e of
5, r
angi
ng b
etw
een
5 an
d 60
. Thi
s at
trib
ute
is a
ppli
cabl
e on
ly w
hen
the
sign
alli
ng p
roto
col
is I
LM
I.
Cre
ate:
O
M
odif
y:O
P
ersi
sten
t
P
rofi
led
0 -
2147
4836
470
"ILM
I T49
3 En
quir
y In
terv
al"
[rai
lmit4
93]
Spe
cify
the
enq
uiry
int
erva
l. T
his
is s
uppo
rted
onl
y on
AX
IS c
ards
. Thi
s at
trib
ute
is a
ppli
cabl
e on
ly w
hen
the
sign
alli
ng p
roto
col
is I
LM
I.
Cre
ate:
O
M
odif
y:O
P
ersi
sten
t
P
rofi
led
0 -
2147
4836
470
"ILM
I VCI
" [r
ailm
ivci
]
Spe
cify
the
VC
I.
Cre
ate:
O
M
odif
y:O
P
ersi
sten
t
P
rofi
led
0 -
2147
4836
470
"ILM
I VPI
" [r
ailm
ivpi
]
Spe
cify
the
VC
I.
Cre
ate:
O
M
odif
y:O
P
ersi
sten
t
P
rofi
led
0 -
2147
4836
470
"LM
I N39
4 St
atus
Enq
uiry
Thr
esho
ld"
[ral
min
394]
Spe
cify
the
max
imum
num
ber
of t
imes
a S
tatu
s E
nqui
ry m
essa
ge i
s re
tran
smit
ted.
A S
tatu
s E
nqui
ry m
essa
ge i
s re
tran
smit
ted
whe
n ti
mer
T39
3 ex
pire
s (N
394)
. Thi
s at
trib
ute
is v
alid
onl
y w
hen
the
sign
alli
ng p
roto
col
is L
MI.
Cre
ate:
O
M
odif
y:O
P
ersi
sten
t
P
rofi
led
0 -
2147
4836
470
"LM
I N
395
Upd
ate
Stat
us T
hres
hold
" [r
alm
in39
5]
Spe
cify
the
upd
ate
stat
us r
etra
nsm
it. T
his
is t
he m
axim
um n
umbe
r of
tim
es a
n U
pdat
e S
tatu
s m
essa
ge i
s re
tran
smit
ted.
An
Upd
ate
Sta
tus
mes
sage
is
retr
ansm
itte
d w
hen
tim
er T
394
expi
res
(N39
5). T
his
attr
ibut
e is
val
id o
nly
whe
n th
e si
gnal
ling
pro
toco
l is
LM
I.
Cre
ate:
O
M
odif
y:O
P
ersi
sten
t
P
rofi
led
0 -
2147
4836
470
Tab
leA
-31
VP
N A
TM
Lo
gic
al
Po
rt -
att
rib
ute
s (
co
nti
nu
ed
)
Attr
ibut
e N
ame
Acc
epta
ble
Valu
esD
efau
lt Va
lue
A-42Cisco VPN Solutions Center Equipment Module Configuration Guide
OL-1816-02
Appendix A Attribute ReferenceVPN ATM Logical Port
"LM
I T3
93 E
nqui
ry T
imer
" [r
alm
it393
]
Set
the
lin
k in
tegr
ity
tim
er f
or t
he p
ort(
T39
3) i
ndic
atin
g th
e in
terv
al a
t w
hich
a s
tatu
s en
quir
y m
essa
ge i
s se
nt. T
his
attr
ibut
e is
val
id o
nly
whe
n th
e si
gnal
ling
pro
toco
l is
LM
I.
Cre
ate:
O
M
odif
y:O
P
ersi
sten
t
P
rofi
led
0 -
2147
4836
470
"LM
I T3
94 U
pdat
e St
atus
Inte
rval
" [r
alm
it394
]
Set
the
upd
ate
stat
us t
imer
for
the
por
t (T
394)
. Thi
s at
trib
ute
is v
alid
onl
y w
hen
the
sign
alli
ng
prot
ocol
is
LM
I.
Cre
ate:
O
M
odif
y:O
P
ersi
sten
t
P
rofi
led
0 -
2147
4836
470
"LM
I T3
96 P
oll I
nter
val"
[ra
lmit3
96]
Set
the
pol
ling
tim
er (
T39
6). I
f po
llin
g is
ena
bled
a s
tatu
s en
quir
y m
essa
ge i
s se
nt w
hen
this
ti
mer
exp
ires
. Thi
s at
trib
ute
is v
alid
onl
y w
hen
the
sign
alli
ng p
roto
col
is L
MI.
Cre
ate:
O
M
odif
y:O
P
ersi
sten
t
P
rofi
led
0 -
2147
4836
470
"VCI
Siz
e (b
its)"
[ra
max
vcib
its]
Spe
cify
the
max
imum
VC
I bi
ts
Cre
ate:
O
M
odif
y:O
P
ersi
sten
t
P
rofi
led
0 -
1616
"VPI
Siz
e (b
its)"
[ra
max
vpib
its]
Spe
cify
the
max
imum
VP
I bi
ts.
Cre
ate:
O
M
odif
y:O
P
ersi
sten
t
P
rofi
led
0 -
1212
"Man
agem
ent P
roto
col"
[ra
mgm
tpro
toco
l]
Spe
cify
the
sig
nall
ing
prot
ocol
. CW
M c
an u
se L
MI,
IL
MI,
or
none
. To
sync
hron
ize
this
val
ue
wit
h th
e sw
itch
, you
mus
t se
t th
is a
ttri
bute
and
del
iver
it
to C
WM
.
Cre
ate:
O
M
odif
y:O
P
ersi
sten
t
P
rofi
led
1 | 2
| 3
3
"Loc
al A
dmin
Sta
tus"
[sr
adm
inst
atus
]
Spe
cify
the
adm
inis
trat
ive
stat
us o
f th
is p
ort.
Cre
ate:
O
M
odif
y:O
P
ersi
sten
t
P
rofi
led
Loc
ked
| Unl
ocke
dU
nloc
ked
"Max
imum
(kbi
ts/s
)" [
sraz
_ban
dwid
th]
Spe
cify
the
max
imum
ban
dwid
th.
Cre
ate:
O
M
odif
y:O
P
ersi
sten
t
P
rofi
led
0 -
2147
4836
4720
0000
Tab
leA
-31
VP
N A
TM
Lo
gic
al
Po
rt -
att
rib
ute
s (
co
nti
nu
ed
)
Attr
ibut
e N
ame
Acc
epta
ble
Valu
esD
efau
lt Va
lue
A-43Cisco VPN Solutions Center Equipment Module Configuration Guide
OL-1816-02
Appendix A Attribute ReferenceVPN ATM Logical Port
"Nom
inal
Thr
esho
ld (%
)" [
sraz
_cbn
t]
Spe
cify
the
nom
inal
thr
esho
ld p
erce
ntag
e.
Cre
ate:
O
M
odif
y:O
P
ersi
sten
t
P
rofi
led
0 -
2147
4836
4710
0
"Pro
visi
onab
le (k
bits
/s)"
[sr
az_c
bw]
Spe
cify
the
com
mit
ted
band
wid
th.
Cre
ate:
O
M
odif
y:O
P
ersi
sten
t
P
rofi
led
0 -
2147
4836
4720
0000
"Bac
kup
Logi
cal P
ort"
[sr
back
uppo
rt.s
rnam
e]
Spe
cify
the
bac
kup
logi
cal
port
.
Cre
ate:
O
M
odif
y:O
P
ersi
sten
t
Text
(32
)""
"Cla
ss"
[src
lass
]
Spe
cify
the
obj
ect
clas
s
Cre
ate:
P
M
odif
y:P
P
ersi
sten
t
P
rofi
led
Text
(4)
"CV
al"
"Max
imum
Con
nect
ions
" [s
rcon
nect
ions
]
Spe
cify
the
max
imum
num
ber
of c
onne
ctio
ns f
or t
he l
ogic
al p
ort.
Cre
ate:
O
M
odif
y:O
P
ersi
sten
t
P
rofi
led
0 -
2147
4836
4750
0
"Mul
tiple
Fab
ric
Rang
es"
[sre
mm
ultir
ange
]
Spe
cify
whe
ther
or
not
this
log
ical
por
t ha
s m
ulti
ple
hard
war
e co
nnec
tion
ID
ran
ges.
Cre
ate:
O
M
odif
y:O
P
ersi
sten
t
P
rofi
led
BO
OL
EA
Nfa
lse
"Por
t Nam
e in
EM
S" [
srem
snam
e]
Thi
s at
trib
ute
can
be u
sed
to h
old
a se
cond
nam
e fo
r an
obj
ect t
o ac
com
mod
ate
diff
eren
t na
mes
in
Cis
co P
rovi
sion
ing
Cen
ter
and
in t
he N
ode/
EM
S/N
MS
.
Cre
ate:
O
M
odif
y:O
P
ersi
sten
t
Text
(65
)""
"Gro
up"
[srg
roup
]
Spe
cify
the
log
ical
por
t gr
oup
mem
bers
hip.
Cre
ate:
O
M
odif
y:O
P
ersi
sten
t
P
rofi
led
Text
(32
)""
"Mul
tiple
Ser
vice
Ran
ges"
[sr
mul
tiran
ge]
Spe
cify
whe
ther
or
not
the
logi
cal
port
sup
port
s m
ulti
ple
rang
es.
Cre
ate:
O
M
odif
y:O
P
ersi
sten
t
P
rofi
led
BO
OL
EA
Nfa
lse
Tab
leA
-31
VP
N A
TM
Lo
gic
al
Po
rt -
att
rib
ute
s (
co
nti
nu
ed
)
Attr
ibut
e N
ame
Acc
epta
ble
Valu
esD
efau
lt Va
lue
A-44Cisco VPN Solutions Center Equipment Module Configuration Guide
OL-1816-02
Appendix A Attribute ReferenceVPN ATM Logical Port
"Mul
tiple
Res
erve
d Ra
nges
" [s
rmul
tires
rang
e]
Spe
cify
whe
ther
or
not
this
log
ical
por
t ha
s m
ulti
ple
rese
rved
har
dwar
e co
nnec
tion
ID
ran
ges.
Cre
ate:
O
M
odif
y:O
P
ersi
sten
t
P
rofi
led
BO
OL
EA
Nfa
lse
"Nam
e" [
srna
me]
Nam
e of
the
log
ical
por
t pr
ofil
e.
Cre
ate:
O
M
odif
y:P
P
ersi
sten
t
Text
(32
)""
"Net
wor
k" [
srne
twor
k.sr
nam
e]
Spe
cify
the
net
wor
k th
at c
onta
ins
this
log
ical
por
t.
Cre
ate:
O
M
odif
y:P
P
ersi
sten
t
Text
(32
)""
"NN
I Ena
bled
" [s
rnni
enab
led]
Spe
cify
whe
ther
or
not
this
por
t is
NN
I en
able
d. S
et t
o tr
ue i
f th
e lo
gica
l po
rt i
s co
nfig
ured
as
NN
I, a
nd f
alse
if
UN
I or
ano
ther
typ
e.
Cre
ate:
O
M
odif
y:O
P
ersi
sten
t
P
rofi
led
BO
OL
EA
Nfa
lse
"Nod
e" [
srno
de.s
rnam
e]
Spe
cify
the
nod
e th
at c
onta
ins
this
log
ical
por
t.
Cre
ate:
O
M
odif
y:P
P
ersi
sten
t
Text
(32
)""
"Pee
r Log
ical
Por
t" [
srpe
er]
Rel
atio
n of
Typ
e O
PT
ION
AL
, Rel
atio
n C
lass
Nam
e =
SR
lpL
ogic
alP
ort
The
pee
r ph
ysic
al p
ort
(joi
ned
to t
his
port
by
a ph
ysic
al l
ink)
.
Cre
ate:
O
M
odif
y:O
"Car
d" [
srpo
rt.s
rcar
d.sr
nam
e]
Spe
cify
the
car
d co
ntai
ning
the
phy
sica
l po
rt.
Cre
ate:
P
M
odif
y:P
P
ersi
sten
t
Text
(32
)""
"Max
imum
Cha
nnel
s" [
srpo
rt.s
rmax
chan
s]
Thi
s th
e m
axim
um n
umbe
r of
cha
nnel
s on
thi
s po
rt.
Cre
ate:
P
M
odif
y:P
P
ersi
sten
t
Text
(32
)""
"Phy
sica
l Por
t" [
srpo
rt.s
rnam
e]
Spe
cify
the
phy
sica
l po
rt a
ssoc
iate
d w
ith
this
log
ical
por
t.
Cre
ate:
O
M
odif
y:O
P
ersi
sten
t
Text
(32
)""
Tab
leA
-31
VP
N A
TM
Lo
gic
al
Po
rt -
att
rib
ute
s (
co
nti
nu
ed
)
Attr
ibut
e N
ame
Acc
epta
ble
Valu
esD
efau
lt Va
lue
A-45Cisco VPN Solutions Center Equipment Module Configuration Guide
OL-1816-02
Appendix A Attribute ReferenceVPN ATM Logical Port
"Por
t Num
ber"
[sr
port
.srp
ortn
umbe
r]
Spe
cify
the
por
t nu
mbe
r.
Cre
ate:
O
M
odif
y:O
P
ersi
sten
t
Text
(32
)""
"She
lf an
d Sl
ot N
umbe
r" [
srpo
rt.s
rslo
tnum
ber]
Spe
cify
the
slo
t nu
mbe
r.
Cre
ate:
P
M
odif
y:P
P
ersi
sten
t
Text
(32
)""
"Fir
st C
hann
el o
n th
is P
port
" [s
rpor
t.srs
tart
chan
]
The
cha
nnel
num
ber
of f
irst
cha
nnel
on
this
por
t.
Cre
ate:
P
M
odif
y:P
P
ersi
sten
t
Text
(32
)""
"IM
ux P
hysi
cal P
ort M
ap"
[srp
papo
rt]
Spe
cify
the
IM
ux p
hysi
cal
port
s al
loca
ted
to t
his
logi
cal
port
.
Cre
ate:
O
M
odif
y:O
P
ersi
sten
t
Text
(10
)""
"Usa
ge P
rior
ity"
[srp
rior
ity]
Spe
cify
the
log
ical
por
t us
age
prio
rity
Cre
ate:
O
M
odif
y:O
P
ersi
sten
t
P
rofi
led
0 -
2147
4836
470
"Pro
file"
[sr
prof
ile]
Rel
atio
n of
Typ
e P
RO
FIL
E, R
elat
ion
Cla
ss N
ame
= C
Val
Atm
LP
ortP
rof
Spe
cify
the
nam
e of
the
pro
file
to
be u
sed
whe
n cr
eati
ng t
his
obje
ct.
Cre
ate:
O
M
odif
y:O
"Pro
toco
l" [
srpr
otoc
ol]
Spe
cify
the
pro
toco
l ty
pe o
f th
is p
ort.
i.e
. AT
M F
R, e
tc.
Cre
ate:
P
M
odif
y:P
P
ersi
sten
t
P
rofi
led
Text
(10
)"A
TM
"
"Qua
lity
of S
ervi
ce"
[srq
os]
Spe
cify
the
QO
S.
Cre
ate:
O
M
odif
y:O
P
ersi
sten
t
P
rofi
led
Text
(32
)""
"Res
ourc
e M
ap"
[srr
mm
ap]
The
thre
ader
wil
l use
the
srrm
map
set
ting
s in
the
Net
wor
k an
d th
e tw
o lo
gica
l por
ts to
det
erm
ine
wha
t ki
nds
of c
ircu
its
are
poss
ible
.
Cre
ate:
O
M
odif
y:O
P
ersi
sten
t
P
rofi
led
0 -
2147
4836
470
Tab
leA
-31
VP
N A
TM
Lo
gic
al
Po
rt -
att
rib
ute
s (
co
nti
nu
ed
)
Attr
ibut
e N
ame
Acc
epta
ble
Valu
esD
efau
lt Va
lue
A-46Cisco VPN Solutions Center Equipment Module Configuration Guide
OL-1816-02
Appendix A Attribute ReferenceVPN ATM Logical Port
"Sig
nalli
ng R
ole"
[sr
sign
allin
grol
e]
You
use
the
DC
E lo
gica
l por
t typ
e to
com
mun
icat
e w
ith
mos
t Fra
me
Rel
ay C
PE
. A D
CE
logi
cal
port
rep
rese
nts
the
"net
wor
k si
de"
equi
pmen
t. T
his
logi
cal p
ort t
ype
supp
orts
all
type
s of
PV
Cs.
T
he D
TE
is
alm
ost
iden
tica
l to
the
DC
E l
ogic
al p
ort
type
exc
ept
for
wit
h S
VC
app
lica
tion
s, i
t as
sum
es t
he r
ole
of t
he “
user
sid
e” o
f th
e U
NI
sign
alli
ng i
nter
face
.
Cre
ate:
O
M
odif
y:O
P
ersi
sten
t
P
rofi
led
DT
E |
DC
ED
CE
"Ow
ning
Ser
vice
" [s
rsoi
d]
Rel
atio
n of
Typ
e O
PT
ION
AL
, Rel
atio
n C
lass
Nam
e =
AN
YC
LA
SS
Spe
cify
the
obj
ect
ID
Cre
ate:
O
M
odif
y:O
"Inc
omin
g A
vaila
ble
Ban
dwid
th (K
bits
/s)"
[sr
usag
e.sr
az_b
andw
idth
_a]
Spe
cify
the
inc
omin
g av
aila
ble
band
wid
th (
Kbi
ts/s
) fo
r th
is l
ogic
al p
ort.
Cre
ate:
P
M
odif
y:P
P
ersi
sten
t
Text
(10
)""
"Inc
omin
g Pr
ovis
iona
ble
Ban
dwid
th (K
bits
/s)"
[sr
usag
e.sr
az_b
andw
idth
_t]
Spe
cify
the
inc
omin
g pr
ovis
iona
ble
band
wid
th (
Kbi
ts/s
) fo
r th
is l
ogic
al p
ort.
Cre
ate:
P
M
odif
y:P
P
ersi
sten
t
Text
(10
)""
"Ava
ilabl
e Co
nnec
tions
" [s
rusa
ge.s
rcon
nect
ions
_a]
Spe
cify
the
ava
ilab
le c
onne
ctio
ns f
or t
his
logi
cal
port
.
Cre
ate:
P
M
odif
y:P
P
ersi
sten
t
Text
(10
)""
"Out
goin
g Av
aila
ble
Ban
dwid
th (K
bits
/s)"
[sr
usag
e.sr
za_b
andw
idth
_a]
Spe
cify
the
out
goin
g av
aila
ble
band
wid
th (
Kbi
ts/s
) fo
r th
is l
ogic
al p
ort.
Cre
ate:
P
M
odif
y:P
P
ersi
sten
t
Text
(10
)""
"Out
goin
g Pr
ovis
iona
ble
Ban
dwid
th (K
bits
/s)"
[sr
usag
e.sr
za_b
andw
idth
_t]
Spe
cify
the
out
goin
g pr
ovis
iona
ble
band
wid
th (
Kbi
ts/s
) fo
r th
is l
ogic
al p
ort.
Cre
ate:
P
M
odif
y:P
P
ersi
sten
t
Text
(10
)""
"Use
r Lab
el"
[sru
serl
abel
]
The
sru
serl
abel
att
ribu
te is
a f
ree-
form
at te
xt f
ield
that
can
be
used
to h
old
any
text
str
ing,
and
is
inte
nded
as
a pl
ace
whe
re a
cus
tom
er c
an s
tore
OS
S-s
peci
fic
info
rmat
ion.
Cre
ate:
O
M
odif
y:O
P
ersi
sten
t
P
rofi
led
Text
(64
)""
Tab
leA
-31
VP
N A
TM
Lo
gic
al
Po
rt -
att
rib
ute
s (
co
nti
nu
ed
)
Attr
ibut
e N
ame
Acc
epta
ble
Valu
esD
efau
lt Va
lue
A-47Cisco VPN Solutions Center Equipment Module Configuration Guide
OL-1816-02
Appendix A Attribute ReferenceVPN ATM Logical Port
"Max
imum
(kbi
ts/s
ec)"
[sr
za_b
andw
idth
]
Spe
cify
the
max
imum
ban
dwid
th (
inco
min
g an
d ou
tgoi
ng).
Cre
ate:
O
M
odif
y:O
P
ersi
sten
t
P
rofi
led
0 -
2147
4836
4720
0000
"Nom
inal
Thr
esho
ld (%
)" [
srza
_cbn
t]
Spe
cify
the
nom
inal
out
goin
g th
resh
old
perc
enta
ge.
Cre
ate:
O
M
odif
y:O
P
ersi
sten
t
P
rofi
led
0 -
2147
4836
4710
0
"Pro
visi
onab
le (k
bits
/sec
)" [
srza
_cbw
]
Spe
cify
the
out
goin
g co
mm
itte
d ba
ndw
idth
.
Cre
ate:
O
M
odif
y:O
P
ersi
sten
t
P
rofi
led
0 -
2147
4836
4720
0000
"Cus
tom
er"
[vpn
]
Spe
cify
the
cus
tom
er.
Cre
ate:
O
M
odif
y:O
P
ersi
sten
t
P
rofi
led
Text
(16
)""
Tab
leA
-31
VP
N A
TM
Lo
gic
al
Po
rt -
att
rib
ute
s (
co
nti
nu
ed
)
Attr
ibut
e N
ame
Acc
epta
ble
Valu
esD
efau
lt Va
lue
A-48Cisco VPN Solutions Center Equipment Module Configuration Guide
OL-1816-02
Appendix A Attribute ReferenceVPN Frame Relay Logical Port
VPN
Fra
me
Rela
y Lo
gica
l Por
t O
bje
ct C
lass
: C
Vfl
FR
LP
ort
Fil
e N
ame:
CV
flF
RL
Por
t.oa
f
Tab
leA
-32
VP
N F
ram
e R
ela
y L
og
ical
Po
rt P
rofi
le -
ch
ara
cte
risti
cs
Cla
ss N
ame:
CV
flF
RL
Por
t
Sho
rt C
lass
Nam
e:fl
Cla
ss L
abel
:C
isco
VP
N F
ram
e R
elay
Log
ical
Por
t
Sup
ercl
ass:
RF
lpL
port
Per
sist
ence
:O
WN
Tab
leA
-33
VP
N F
ram
e R
ela
y L
og
ical
Po
rt P
rofi
le -
att
rib
ute
s
Attr
ibut
e N
ame
Acc
epta
ble
Valu
esD
efau
lt Va
lue
"Dom
ain"
[do
mai
n]
Spe
cify
the
man
agem
ent
dom
ain.
Cre
ate:
O
M
odif
y:O
P
ersi
sten
t
P
rofi
led
Text
(16
)""
"Def
ault
Add
ress
" [r
fadd
ress
]
Spe
cify
the
def
ault
fra
me
rela
y ad
dres
s.
Cre
ate:
O
M
odif
y:O
P
ersi
sten
t
P
rofi
led
Text
(64
)""
"Add
ress
Len
gth"
[rf
addr
essl
engt
h]
Spe
cify
the
add
ress
len
gth.
Cre
ate:
O
M
odif
y:O
P
ersi
sten
t
P
rofi
led
2Byt
e10
| 3B
yte1
0 |
3Byt
e16
| 4B
yte1
7 |
4Byt
e23
2Byt
e10
"Def
ault
Add
ress
Typ
e" [
rfad
dres
styp
e]
Spe
cify
the
add
ress
typ
e of
def
ault
FR
add
ress
.
Cre
ate:
O
M
odif
y:O
P
ersi
sten
t
P
rofi
led
E.1
64E
.164
"N39
2 D
CE E
rror
Thr
esho
ld"
[rfd
ceer
rthr
eshl
d]
Spe
cify
the
DC
E e
rror
thr
esho
ld.
Cre
ate:
O
M
odif
y:O
P
ersi
sten
t
P
rofi
led
0 -
2147
4836
470
A-49Cisco VPN Solutions Center Equipment Module Configuration Guide
OL-1816-02
Appendix A Attribute ReferenceVPN Frame Relay Logical Port
"N39
3 D
CE E
rror
Win
dow
" [r
fdce
errw
indo
w]
Spe
cify
the
DC
E e
rror
win
dow
.
Cre
ate:
O
M
odif
y:O
P
ersi
sten
t
P
rofi
led
0 -
2147
4836
470
"T39
2 Po
lling
Ver
ifica
tion
Tim
er (s
ecs)
" [r
fdce
polli
ntv]
Set
the
int
erva
l in
sec
onds
for
the
UN
I to
exp
ect
stat
us p
olli
ng.
Cre
ate:
O
M
odif
y:O
P
ersi
sten
t
P
rofi
led
0 -
2147
4836
470
"N39
2 Er
ror T
hres
hold
" [r
fdte
errt
hres
hld]
Spe
cify
the
UN
I/N
NI
erro
r th
resh
old.
Cre
ate:
O
M
odif
y:O
P
ersi
sten
t
P
rofi
led
0 -
2147
4836
470
"N39
3 M
onito
red
Even
t Cou
nt"
[rfd
teer
rwin
dow
]
Spe
cify
the
mon
itor
ed U
NI/
NN
I ev
ent
coun
t. T
his
valu
e m
ust
alw
ays
be g
reat
er t
han
the
UN
I/N
NI
erro
r th
resh
old
para
met
er.
Cre
ate:
O
M
odif
y:O
P
ersi
sten
t
P
rofi
led
0 -
2147
4836
470
"N39
1 Fu
ll St
ate
Polli
ng C
ount
er"
[rfd
tefu
llenq
intv
]
Spe
cify
the
num
ber
of U
NI/
NN
I po
llin
g cy
cles
.
Cre
ate:
O
M
odif
y:O
P
ersi
sten
t
P
rofi
led
0 -
2147
4836
470
"T39
1 Li
nk In
tegr
ity T
imer
(sec
s)"
[rfd
tepo
llint
v]
Set
the
int
erva
l in
sec
onds
for
the
NN
I to
do
stat
us p
olli
ng.
Cre
ate:
O
M
odif
y:O
P
ersi
sten
t
P
rofi
led
0 -
2147
4836
470
"Man
agem
ent P
roto
col"
[rf
mgm
tpro
toco
l]
Spe
cify
the
LM
I op
erat
ion
mod
e.
Cre
ate:
O
M
odif
y:O
P
ersi
sten
t
P
rofi
led
Non
e | L
MI
user
| L
MI
netw
ork
| LM
I ne
twor
k ex
tend
ed |
Ann
ex D
use
r | A
nnex
D n
etw
ork
| A
nnex
D b
i-di
rect
iona
l |
Ann
ex A
use
r | A
nnex
A
netw
ork
| Ann
ex A
bi
-dir
ecti
onal
Non
e
"Loc
al A
dmin
Sta
tus"
[sr
adm
inst
atus
]
Spe
cify
the
adm
inis
trat
ive
stat
us o
f th
is p
ort.
Cre
ate:
O
M
odif
y:O
P
ersi
sten
t
P
rofi
led
Loc
ked
| Unl
ocke
dU
nloc
ked
Tab
leA
-33
VP
N F
ram
e R
ela
y L
og
ical
Po
rt P
rofi
le -
att
rib
ute
s (
co
nti
nu
ed
)
Attr
ibut
e N
ame
Acc
epta
ble
Valu
esD
efau
lt Va
lue
A-50Cisco VPN Solutions Center Equipment Module Configuration Guide
OL-1816-02
Appendix A Attribute ReferenceVPN Frame Relay Logical Port
"Max
imum
(kbi
ts/s
)" [
sraz
_ban
dwid
th]
Thi
s is
the
ban
dwid
th a
vail
able
for
pro
visi
onin
g. I
f cs
_con
bwen
able
d is
set
to
TR
UE
, the
n th
is
valu
e is
the
con
sum
ed b
andw
idth
.
Cre
ate:
O
M
odif
y:O
P
ersi
sten
t
P
rofi
led
0 -
2147
4836
4720
0000
"Nom
inal
Thr
esho
ld (%
)" [
sraz
_cbn
t]
Spe
cify
the
nom
inal
thr
esho
ld p
erce
ntag
e.
Cre
ate:
O
M
odif
y:O
P
ersi
sten
t
P
rofi
led
0 -
2147
4836
4710
0
"Pro
visi
onab
le (k
bits
/s)"
[sr
az_c
bw]
Spe
cify
the
com
mit
ted
band
wid
th.
Cre
ate:
O
M
odif
y:O
P
ersi
sten
t
P
rofi
led
0 -
2147
4836
4720
0000
" " [
srba
ckup
port
]
Rel
atio
n of
Typ
e O
PT
ION
AL
, Rel
atio
n C
lass
Nam
e =
CV
ppP
Por
t
Spe
cify
a b
acku
p lo
gica
l po
rt.
Cre
ate:
O
M
odif
y:O
"Bac
kup
Logi
cal P
ort"
[sr
back
uppo
rt.s
rnam
e]
Spe
cify
the
cak
up l
ogic
al p
ort.
Cre
ate:
O
M
odif
y:O
P
ersi
sten
t
Text
(32
)""
"Cla
ss"
[src
lass
]
Spe
cify
the
obj
ect
clas
s
Cre
ate:
P
M
odif
y:P
P
ersi
sten
t
P
rofi
led
Text
(4)
"CV
fl"
"Max
imum
Con
nect
ions
" [s
rcon
nect
ions
]
Spe
cify
the
max
imum
num
ber
of c
onne
ctio
ns f
or t
he l
ogic
al p
ort.
Cre
ate:
O
M
odif
y:O
P
ersi
sten
t
P
rofi
led
0 -
2147
4836
4750
0
"Mul
tiple
Fab
ric
Rang
es"
[sre
mm
ultir
ange
]
Spe
cify
whe
ther
or
not
this
log
ical
por
t ha
s m
ulti
ple
hard
war
e co
nnec
tion
ID
ran
ges.
Cre
ate:
O
M
odif
y:O
P
ersi
sten
t
P
rofi
led
BO
OL
EA
Nfa
lse
"Por
t Nam
e in
EM
S" [
srem
snam
e]
Thi
s at
trib
ute
can
be u
sed
to h
old
a se
cond
nam
e fo
r an
obj
ect t
o ac
com
mod
ate
diff
eren
t na
mes
in
Cis
co P
rovi
sion
ing
Cen
ter
and
in t
he N
ode/
EM
S/N
MS
.
Cre
ate:
O
M
odif
y:O
P
ersi
sten
t
Text
(65
)""
Tab
leA
-33
VP
N F
ram
e R
ela
y L
og
ical
Po
rt P
rofi
le -
att
rib
ute
s (
co
nti
nu
ed
)
Attr
ibut
e N
ame
Acc
epta
ble
Valu
esD
efau
lt Va
lue
A-51Cisco VPN Solutions Center Equipment Module Configuration Guide
OL-1816-02
Appendix A Attribute ReferenceVPN Frame Relay Logical Port
"Gro
up"
[srg
roup
]
Spe
cify
the
log
ical
por
t gr
oup
mem
bers
hip.
Cre
ate:
O
M
odif
y:O
P
ersi
sten
t
P
rofi
led
Text
(32
)""
"Mul
tiple
Ser
vice
Ran
ges"
[sr
mul
tiran
ge]
Spe
cify
whe
ther
or
not
the
logi
cal
port
sup
port
s m
ulti
ple
rang
es.
Cre
ate:
O
M
odif
y:O
P
ersi
sten
t
P
rofi
led
BO
OL
EA
Nfa
lse
"Mul
tiple
Res
erve
d Ra
nges
" [s
rmul
tires
rang
e]
Spe
cify
whe
ther
or
not
this
log
ical
por
t ha
s m
ulti
ple
rese
rved
har
dwar
e co
nnec
tion
ID
ran
ges.
Cre
ate:
O
M
odif
y:O
P
ersi
sten
t
P
rofi
led
BO
OL
EA
Nfa
lse
"Nam
e" [
srna
me]
Nam
e of
the
log
ical
por
t pr
ofil
e.
Cre
ate:
O
M
odif
y:P
P
ersi
sten
t
Text
(32
)""
" " [
srne
twor
k]
Rel
atio
n of
Typ
e G
RA
ND
PAR
EN
T, R
elat
ion
Cla
ss N
ame
= C
Vnt
VP
NN
etw
ork
Spe
cify
the
nam
e of
the
con
tain
ing
netw
ork.
Cre
ate:
O
M
odif
y:O
"Net
wor
k" [
srne
twor
k.sr
nam
e]
Spe
cify
the
net
wor
k th
at c
onta
ins
this
log
ical
por
t.
Cre
ate:
O
M
odif
y:P
P
ersi
sten
t
Text
(32
)""
"NN
I Ena
bled
" [s
rnni
enab
led]
Spe
cify
whe
ther
or
not
this
por
t is
NN
I en
able
d. S
et t
o tr
ue i
f th
e lo
gica
l po
rt i
s co
nfig
ured
as
NN
I, a
nd f
alse
if
UN
I or
ano
ther
typ
e.
Cre
ate:
O
M
odif
y:O
P
ersi
sten
t
P
rofi
led
BO
OL
EA
Nfa
lse
" " [
srno
de]
Rel
atio
n of
Typ
e PA
RE
NT,
Rel
atio
n C
lass
Nam
e =
CV
zrR
oute
r
Spe
cify
the
con
tain
ing
node
.
Cre
ate:
O
M
odif
y:O
Tab
leA
-33
VP
N F
ram
e R
ela
y L
og
ical
Po
rt P
rofi
le -
att
rib
ute
s (
co
nti
nu
ed
)
Attr
ibut
e N
ame
Acc
epta
ble
Valu
esD
efau
lt Va
lue
A-52Cisco VPN Solutions Center Equipment Module Configuration Guide
OL-1816-02
Appendix A Attribute ReferenceVPN Frame Relay Logical Port
"Nod
e" [
srno
de.s
rnam
e]
Spe
cify
the
nod
e th
at c
onta
ins
this
log
ical
por
t.
Cre
ate:
O
M
odif
y:P
P
ersi
sten
t
Text
(32
)""
"Pee
r Log
ical
Por
t" [
srpe
er]
Rel
atio
n of
Typ
e O
PT
ION
AL
, Rel
atio
n C
lass
Nam
e =
SR
lpL
ogic
alP
ort
The
pee
r ph
ysic
al p
ort
(joi
ned
to t
his
port
by
a ph
ysic
al l
ink)
.
Cre
ate:
O
M
odif
y:O
" " [
srpo
rt]
Rel
atio
n of
Typ
e O
PT
ION
AL
, Rel
atio
n C
lass
Nam
e =
CV
ppP
Por
t
Spe
cify
the
con
tain
ing
phys
ical
por
t.
Cre
ate:
O
M
odif
y:O
"Car
d" [
srpo
rt.s
rcar
d.sr
nam
e]
Spe
cify
the
car
d co
ntai
ning
the
phy
sica
l po
rt.
Cre
ate:
P
M
odif
y:P
P
ersi
sten
t
Text
(32
)""
"Max
imum
Cha
nnel
s" [
srpo
rt.s
rmax
chan
s]
Thi
s th
e m
axim
um n
umbe
r of
cha
nnel
s on
thi
s po
rt.
Cre
ate:
P
M
odif
y:P
P
ersi
sten
t
Text
(32
)""
"Phy
sica
l Por
t" [
srpo
rt.s
rnam
e]
Spe
cify
the
nod
e as
soci
ated
wit
h th
is l
ogic
al p
ort.
Cre
ate:
O
M
odif
y:O
P
ersi
sten
t
Text
(32
)""
"Por
t Num
ber"
[sr
port
.srp
ortn
umbe
r]
Spe
cify
the
por
t nu
mbe
r.
Cre
ate:
O
M
odif
y:O
P
ersi
sten
t
Text
(32
)""
"She
lf an
d Sl
ot N
umbe
r" [
srpo
rt.s
rslo
tnum
ber]
Spe
cify
the
slo
t nu
mbe
r.
Cre
ate:
P
M
odif
y:P
P
ersi
sten
t
Text
(32
)""
"Fir
st C
hann
el o
n th
is P
port
" [s
rpor
t.srs
tart
chan
]
The
cha
nnel
num
ber
of f
irst
cha
nnel
on
this
por
t.
Cre
ate:
P
M
odif
y:P
P
ersi
sten
t
Text
(32
)""
Tab
leA
-33
VP
N F
ram
e R
ela
y L
og
ical
Po
rt P
rofi
le -
att
rib
ute
s (
co
nti
nu
ed
)
Attr
ibut
e N
ame
Acc
epta
ble
Valu
esD
efau
lt Va
lue
A-53Cisco VPN Solutions Center Equipment Module Configuration Guide
OL-1816-02
Appendix A Attribute ReferenceVPN Frame Relay Logical Port
"IM
ux P
hysi
cal P
ort M
ap"
[srp
papo
rt]
Spe
cify
the
IM
ux p
hysi
cal
port
s al
loca
ted
to t
his
logi
cal
port
.
Cre
ate:
O
M
odif
y:O
P
ersi
sten
t
Text
(10
)""
"Usa
ge P
rior
ity"
[srp
rior
ity]
Spe
cify
the
log
ical
por
t us
age
prio
rity
Cre
ate:
O
M
odif
y:O
P
ersi
sten
t
P
rofi
led
0 -
2147
4836
470
"Pro
file"
[sr
prof
ile]
Rel
atio
n of
Typ
e P
RO
FIL
E, R
elat
ion
Cla
ss N
ame
= C
Vfl
FR
LP
ortP
rof
Spe
cify
the
nam
e of
the
pro
file
to
be u
sed
whe
n cr
eati
ng t
his
obje
ct.
Cre
ate:
O
M
odif
y:O
"srp
rofil
e.sy
_pro
fnam
e" [
srpr
ofile
.sy_
prof
nam
e]
Spe
cify
the
nam
e of
the
pro
file
to
be u
sed
whe
n cr
eati
ng t
his
obje
ct.
Cre
ate:
O
M
odif
y:O
P
ersi
sten
t
Text
(32
)""
"Pro
toco
l" [
srpr
otoc
ol]
Spe
cify
the
pro
toco
l ty
pe o
f th
is p
ort.
i.e
. AT
M F
R, e
tc.
Cre
ate:
P
M
odif
y:P
P
ersi
sten
t
P
rofi
led
Text
(10
)"F
R"
"Qua
lity
of S
ervi
ce"
[srq
os]
Spe
cify
the
QO
S.
Cre
ate:
O
M
odif
y:O
P
ersi
sten
t
P
rofi
led
Text
(32
)""
"Res
ourc
e M
ap"
[srr
mm
ap]
The
thre
ader
wil
l use
the
srrm
map
set
ting
s in
the
Net
wor
k an
d th
e tw
o lo
gica
l por
ts to
det
erm
ine
wha
t ki
nds
of c
ircu
its
are
poss
ible
.
Cre
ate:
O
M
odif
y:O
P
ersi
sten
t
P
rofi
led
0 -
2147
4836
470
"Sig
nalli
ng R
ole"
[sr
sign
allin
grol
e]
You
use
the
DC
E lo
gica
l por
t typ
e to
com
mun
icat
e w
ith
mos
t Fra
me
Rel
ay C
PE
. A D
CE
logi
cal
port
rep
rese
nts
the
“net
wor
k si
de”
equi
pmen
t. T
his
logi
cal p
ort t
ype
supp
orts
all
type
s of
PV
Cs.
T
he D
TE
is
alm
ost
iden
tica
l to
the
DC
E l
ogic
al p
ort
type
exc
ept
for
wit
h S
VC
app
lica
tion
s, i
t as
sum
es t
he r
ole
of t
he “
user
sid
e” o
f th
e U
NI
sign
alli
ng i
nter
face
.
Cre
ate:
O
M
odif
y:O
P
ersi
sten
t
P
rofi
led
DT
E |
DC
ED
CE
Tab
leA
-33
VP
N F
ram
e R
ela
y L
og
ical
Po
rt P
rofi
le -
att
rib
ute
s (
co
nti
nu
ed
)
Attr
ibut
e N
ame
Acc
epta
ble
Valu
esD
efau
lt Va
lue
A-54Cisco VPN Solutions Center Equipment Module Configuration Guide
OL-1816-02
Appendix A Attribute ReferenceVPN Frame Relay Logical Port
"Ow
ning
Ser
vice
" [s
rsoi
d]
Rel
atio
n of
Typ
e O
PT
ION
AL
, Rel
atio
n C
lass
Nam
e =
AN
YC
LA
SS
Spe
cify
the
obj
ect
ID
Cre
ate:
O
M
odif
y:O
"Inc
omin
g A
vaila
ble
Ban
dwid
th (K
bits
/s)"
[sr
usag
e.sr
az_b
andw
idth
_a]
Spe
cify
the
inc
omin
g av
aila
ble
band
wid
th (
Kbi
ts/s
) fo
r th
is l
ogic
al p
ort.
Cre
ate:
P
M
odif
y:P
P
ersi
sten
t
Text
(10
)""
"Inc
omin
g Pr
ovis
iona
ble
Ban
dwid
th (K
bits
/s)"
[sr
usag
e.sr
az_b
andw
idth
_t]
Spe
cify
the
inc
omin
g pr
ovis
iona
ble
band
wid
th (
Kbi
ts/s
) fo
r th
is l
ogic
al p
ort.
Cre
ate:
P
M
odif
y:P
P
ersi
sten
t
Text
(10
)""
"Out
goin
g Av
aila
ble
Ban
dwid
th (K
bits
/s)"
[sr
usag
e.sr
za_b
andw
idth
_a]
Spe
cify
the
inc
omin
g pr
ovis
iona
ble
band
wid
th (
Kbi
ts/s
) fo
r th
is l
ogic
al p
ort.
Cre
ate:
P
M
odif
y:P
P
ersi
sten
t
Text
(10
)""
"Out
goin
g Pr
ovis
iona
ble
Ban
dwid
th (K
bits
/s)"
[sr
usag
e.sr
za_b
andw
idth
_t]
Spe
cify
the
out
goin
g pr
ovis
iona
ble
band
wid
th (
Kbi
ts/s
) fo
r th
is l
ogic
al p
ort.
Cre
ate:
P
M
odif
y:P
P
ersi
sten
t
Text
(10
)""
"Use
r Lab
el"
[sru
serl
abel
]
The
sru
serl
abel
att
ribu
te is
a f
ree-
form
at te
xt f
ield
that
can
be
used
to h
old
any
text
str
ing,
and
is
inte
nded
as
a pl
ace
whe
re a
cus
tom
er c
an s
tore
OS
S-s
peci
fic
info
rmat
ion.
Cre
ate:
O
M
odif
y:O
P
ersi
sten
t
P
rofi
led
Text
(64
)""
"Max
imum
(kbi
ts/s
ec)"
[sr
za_b
andw
idth
]
Spe
cify
the
inc
omin
g pr
ovis
iona
ble
band
wid
th (
Kbi
ts/s
) fo
r th
is l
ogic
al p
ort.
Cre
ate:
O
M
odif
y:O
P
ersi
sten
t
P
rofi
led
0 -
2147
4836
4720
0000
"Nom
inal
Thr
esho
ld (%
)" [
srza
_cbn
t]
Spe
cify
the
nom
inal
out
goin
g th
resh
old
perc
enta
ge.
Cre
ate:
O
M
odif
y:O
P
ersi
sten
t
P
rofi
led
0 -
2147
4836
4710
0
Tab
leA
-33
VP
N F
ram
e R
ela
y L
og
ical
Po
rt P
rofi
le -
att
rib
ute
s (
co
nti
nu
ed
)
Attr
ibut
e N
ame
Acc
epta
ble
Valu
esD
efau
lt Va
lue
A-55Cisco VPN Solutions Center Equipment Module Configuration Guide
OL-1816-02
Appendix A Attribute ReferenceVPN Frame Relay Logical Port
"Pro
visi
onab
le (k
bits
/sec
)" [
srza
_cbw
]
Spe
cify
the
out
goin
g co
mm
itte
d ba
ndw
idth
.
Cre
ate:
O
M
odif
y:O
P
ersi
sten
t
P
rofi
led
0 -
2147
4836
4720
0000
"Cus
tom
er"
[vpn
]
Spe
cify
the
cus
tom
er.
Cre
ate:
O
M
odif
y:O
P
ersi
sten
t
P
rofi
led
Text
(16
)""
Tab
leA
-33
VP
N F
ram
e R
ela
y L
og
ical
Po
rt P
rofi
le -
att
rib
ute
s (
co
nti
nu
ed
)
Attr
ibut
e N
ame
Acc
epta
ble
Valu
esD
efau
lt Va
lue
A-56Cisco VPN Solutions Center Equipment Module Configuration Guide
OL-1816-02
Appendix A Attribute ReferenceVPN Logical Port
VPN
Log
ical
Por
t O
bje
ct C
lass
: C
Vlp
LP
ort
Fil
e N
ame:
CV
lpL
Por
t.oa
f
The
con
tent
s of
thi
s ta
ble
wil
l ch
ange
dep
endi
ng o
n th
e ty
pe o
f ph
ysic
al p
orts
you
hav
e up
load
ed. T
he m
ost
basi
c se
t of
att
ribu
tes
have
bee
n de
scri
bed
belo
w.
For
a d
escr
ipti
on o
f lo
gica
l por
ts th
at a
re s
peci
fic
to a
par
ticu
lar
type
of
equi
pmen
t, p
leas
e re
fer
to t
he c
onfi
gura
tion
gui
de f
or t
hat
equi
pmen
t. F
or e
xam
ple,
for
MG
X l
ogic
al p
orts
ref
er t
o th
e C
isco
WA
N M
anag
er C
onfi
gura
tion
Gui
de.
Tab
leA
-34
VP
N L
og
ica
l P
ort
- c
ha
racte
risti
cs
Cla
ss N
ame:
CV
lpL
Por
t
Sho
rt C
lass
Nam
e:lp
Cla
ss L
abel
:C
isco
VP
N L
Por
t
Sup
ercl
ass:
SR
lpL
ogic
alP
ort
Per
sist
ence
:O
WN
Tab
leA
-35
VP
N L
og
ica
l P
ort
- a
ttri
bu
tes
Attr
ibut
e N
ame
Acc
epta
ble
Valu
esD
efau
lt Va
lue
"Dom
ain"
[do
mai
n]
Spe
cify
the
man
agem
ent
dom
ain.
Cre
ate:
O
M
odif
y:O
P
ersi
sten
t
P
rofi
led
Text
(16
)""
"Loc
al A
dmin
Sta
tus"
[sr
adm
inst
atus
]
Spe
cify
the
adm
inis
trat
ive
stat
us o
f th
is p
ort.
Cre
ate:
O
M
odif
y:O
P
ersi
sten
t
P
rofi
led
Loc
ked
| Unl
ocke
dU
nloc
ked
"Max
imum
(kbi
ts/s
)" [
sraz
_ban
dwid
th]
Thi
s is
the
ban
dwid
th a
vail
able
for
pro
visi
onin
g. I
f cs
_con
bwen
able
d is
set
to
TR
UE
, the
n th
is
valu
e is
the
con
sum
ed b
andw
idth
.
Cre
ate:
O
M
odif
y:O
P
ersi
sten
t
P
rofi
led
0 -
2147
4836
4720
0000
"Nom
inal
Thr
esho
ld (%
)" [
sraz
_cbn
t]
Spe
cify
the
nom
inal
thr
esho
ld p
erce
ntag
e.
Cre
ate:
O
M
odif
y:O
P
ersi
sten
t
P
rofi
led
0 -
2147
4836
4710
0
A-57Cisco VPN Solutions Center Equipment Module Configuration Guide
OL-1816-02
Appendix A Attribute ReferenceVPN Logical Port
"Pro
visi
onab
le (k
bits
/s)"
[sr
az_c
bw]
Spe
cify
the
com
mit
ted
band
wid
th.
Cre
ate:
O
M
odif
y:O
P
ersi
sten
t
P
rofi
led
0 -
2147
4836
4720
0000
"Bac
kup
Logi
cal P
ort"
[sr
back
uppo
rt.s
rnam
e]
Spe
cify
the
bac
kup
logi
cal
port
.
Cre
ate:
O
M
odif
y:O
P
ersi
sten
t
Text
(32
)""
"Cla
ss"
[src
lass
]
Spe
cify
the
obj
ect
clas
s
Cre
ate:
P
M
odif
y:P
P
ersi
sten
t
P
rofi
led
Text
(4)
"CV
lp"
"Max
imum
Con
nect
ions
" [s
rcon
nect
ions
]
Spe
cify
the
max
imum
con
nect
ions
on
this
log
ical
por
t.
Cre
ate:
O
M
odif
y:O
P
ersi
sten
t
P
rofi
led
0 -
2147
4836
4750
0
"Mul
tiple
Fab
ric
Rang
es"
[sre
mm
ultir
ange
]
Spe
cify
whe
ther
or
not
this
log
ical
por
t ha
s m
ulti
ple
hard
war
e co
nnec
tion
ID
ran
ges.
Cre
ate:
O
M
odif
y:O
P
ersi
sten
t
P
rofi
led
BO
OL
EA
Nfa
lse
"Por
t Nam
e in
EM
S" [
srem
snam
e]
Thi
s at
trib
ute
can
be u
sed
to h
old
a se
cond
nam
e fo
r an
obj
ect t
o ac
com
mod
ate
diff
eren
t na
mes
in
Cis
co P
rovi
sion
ing
Cen
ter
and
in t
he N
ode/
EM
S/N
MS
.
Cre
ate:
O
M
odif
y:O
P
ersi
sten
t
Text
(65
)""
"Gro
up"
[srg
roup
]
Spe
cify
the
log
ical
por
t gr
oup
mem
bers
hip.
Cre
ate:
O
M
odif
y:O
P
ersi
sten
t
P
rofi
led
Text
(32
)""
"Mul
tiple
Ser
vice
Ran
ges"
[sr
mul
tiran
ge]
Spe
cify
whe
ther
or
not
the
logi
cal
port
sup
port
s m
ulti
ple
rang
es.
Cre
ate:
O
M
odif
y:O
P
ersi
sten
t
P
rofi
led
BO
OL
EA
Nfa
lse
"Mul
tiple
Res
erve
d Ra
nges
" [s
rmul
tires
rang
e]
Spe
cify
whe
ther
or
not
this
log
ical
por
t ha
s m
ulti
ple
rese
rved
har
dwar
e co
nnec
tion
ID
ran
ges.
Cre
ate:
O
M
odif
y:O
P
ersi
sten
t
P
rofi
led
BO
OL
EA
Nfa
lse
Tab
leA
-35
VP
N L
og
ica
l P
ort
- a
ttri
bu
tes (
co
nti
nu
ed
)
Attr
ibut
e N
ame
Acc
epta
ble
Valu
esD
efau
lt Va
lue
A-58Cisco VPN Solutions Center Equipment Module Configuration Guide
OL-1816-02
Appendix A Attribute ReferenceVPN Logical Port
"Nam
e" [
srna
me]
Nam
e of
the
log
ical
por
t.
Cre
ate:
O
M
odif
y:P
P
ersi
sten
t
Text
(32
)""
"Net
wor
k" [
srne
twor
k.sr
nam
e]
Spe
cify
the
net
wor
k th
at c
onta
ins
this
log
ical
por
t.
Cre
ate:
O
M
odif
y:P
P
ersi
sten
t
Text
(32
)""
"NN
I Ena
bled
" [s
rnni
enab
led]
Spe
cify
whe
ther
or
not
this
por
t is
NN
I en
able
d. S
et t
o tr
ue i
f th
e lo
gica
l po
rt i
s co
nfig
ured
as
NN
I, a
nd f
alse
if
UN
I or
ano
ther
typ
e.
Cre
ate:
O
M
odif
y:O
P
ersi
sten
t
P
rofi
led
BO
OL
EA
Nfa
lse
"Nod
e" [
srno
de.s
rnam
e]
Spe
cify
the
nod
e th
at c
onta
ins
this
log
ical
por
t.
Cre
ate:
O
M
odif
y:P
P
ersi
sten
t
Text
(32
)""
"Pee
r Log
ical
Por
t" [
srpe
er]
Rel
atio
n of
Typ
e O
PT
ION
AL
, Rel
atio
n C
lass
Nam
e =
SR
lpL
ogic
alP
ort
The
pee
r ph
ysic
al p
ort
(joi
ned
to t
his
port
by
a ph
ysic
al l
ink)
.
Cre
ate:
O
M
odif
y:O
"Car
d" [
srpo
rt.s
rcar
d.sr
nam
e]
Spe
cify
the
car
d co
ntai
ning
the
phy
sica
l po
rt.
Cre
ate:
P
M
odif
y:P
P
ersi
sten
t
Text
(32
)""
"Max
imum
Cha
nnel
s" [
srpo
rt.s
rmax
chan
s]
Thi
s th
e m
axim
um n
umbe
r of
cha
nnel
s on
thi
s po
rt.
Cre
ate:
P
M
odif
y:P
P
ersi
sten
t
Text
(32
)""
"Phy
sica
l Por
t" [
srpo
rt.s
rnam
e]
Spe
cify
the
phy
sica
l po
rt a
ssoc
iate
d w
ith
this
log
ical
por
t.
Cre
ate:
O
M
odif
y:O
P
ersi
sten
t
Text
(32
)""
"Por
t Num
ber"
[sr
port
.srp
ortn
umbe
r]
Spe
cify
the
por
t nu
mbe
r.
Cre
ate:
O
M
odif
y:O
P
ersi
sten
t
Text
(32
)""
Tab
leA
-35
VP
N L
og
ica
l P
ort
- a
ttri
bu
tes (
co
nti
nu
ed
)
Attr
ibut
e N
ame
Acc
epta
ble
Valu
esD
efau
lt Va
lue
A-59Cisco VPN Solutions Center Equipment Module Configuration Guide
OL-1816-02
Appendix A Attribute ReferenceVPN Logical Port
"She
lf an
d Sl
ot N
umbe
r" [
srpo
rt.s
rslo
tnum
ber]
Spe
cify
the
slo
t nu
mbe
r.
Cre
ate:
P
M
odif
y:P
P
ersi
sten
t
Text
(32
)""
"Fir
st C
hann
el o
n th
is P
port
" [s
rpor
t.srs
tart
chan
]
The
cha
nnel
num
ber
of f
irst
cha
nnel
on
this
por
t.
Cre
ate:
P
M
odif
y:P
P
ersi
sten
t
Text
(32
)""
"IM
ux P
hysi
cal P
ort M
ap"
[srp
papo
rt]
Spe
cify
the
IM
ux p
hysi
cal
port
s al
loca
ted
to t
his
logi
cal
port
.
Cre
ate:
O
M
odif
y:O
P
ersi
sten
t
Text
(10
)""
"Usa
ge P
rior
ity"
[srp
rior
ity]
Spe
cify
the
log
ical
por
t us
age
prio
rity
Cre
ate:
O
M
odif
y:O
P
ersi
sten
t
P
rofi
led
0 -
2147
4836
470
"Pro
file"
[sr
prof
ile]
Rel
atio
n of
Typ
e P
RO
FIL
E, R
elat
ion
Cla
ss N
ame
= C
Vlp
LP
ortP
rof
Spe
cify
the
nam
e of
the
pro
file
to
be u
sed
whe
n cr
eati
ng t
his
obje
ct.
Cre
ate:
O
M
odif
y:O
"Pro
toco
l" [
srpr
otoc
ol]
Spe
cify
the
pro
toco
l ty
pe o
f th
is p
ort.
i.e
. AT
M F
R, e
tc.
Cre
ate:
P
M
odif
y:P
P
ersi
sten
t
P
rofi
led
Text
(10
)"O
TH
ER
"
"Qua
lity
of S
ervi
ce"
[srq
os]
Spe
cify
the
QO
S.
Cre
ate:
O
M
odif
y:O
P
ersi
sten
t
P
rofi
led
Text
(32
)""
"Res
ourc
e M
ap"
[srr
mm
ap]
The
thre
ader
wil
l use
the
srrm
map
set
ting
s in
the
Net
wor
k an
d th
e tw
o lo
gica
l por
ts to
det
erm
ine
wha
t ki
nds
of c
ircu
its
are
poss
ible
.
Cre
ate:
O
M
odif
y:O
P
ersi
sten
t
P
rofi
led
0 -
2147
4836
470
Tab
leA
-35
VP
N L
og
ica
l P
ort
- a
ttri
bu
tes (
co
nti
nu
ed
)
Attr
ibut
e N
ame
Acc
epta
ble
Valu
esD
efau
lt Va
lue
A-60Cisco VPN Solutions Center Equipment Module Configuration Guide
OL-1816-02
Appendix A Attribute ReferenceVPN Logical Port
"Sig
nalli
ng R
ole"
[sr
sign
allin
grol
e]
You
use
the
DC
E lo
gica
l por
t typ
e to
com
mun
icat
e w
ith
mos
t Fra
me
Rel
ay C
PE
. A D
CE
logi
cal
port
rep
rese
nts
the
“net
wor
k si
de”
equi
pmen
t. T
his
logi
cal p
ort t
ype
supp
orts
all
type
s of
PV
Cs.
T
he D
TE
is
alm
ost
iden
tica
l to
the
DC
E l
ogic
al p
ort
type
exc
ept
for
wit
h S
VC
app
lica
tion
s, i
t as
sum
es t
he r
ole
of t
he “
user
sid
e” o
f th
e U
NI
sign
alli
ng i
nter
face
.
Cre
ate:
O
M
odif
y:O
P
ersi
sten
t
P
rofi
led
DT
E |
DC
ED
CE
"Ow
ning
Ser
vice
" [s
rsoi
d]
Rel
atio
n of
Typ
e O
PT
ION
AL
, Rel
atio
n C
lass
Nam
e =
AN
YC
LA
SS
Spe
cify
the
obj
ect
ID
Cre
ate:
O
M
odif
y:O
"Inc
omin
g A
vaila
ble
Ban
dwid
th (K
bits
/s)"
[sr
usag
e.sr
az_b
andw
idth
_a]
Spe
cify
the
inc
omin
g av
aila
ble
band
wid
th (
Kbi
ts/s
) fo
r th
is l
ogic
al p
ort.
Cre
ate:
O
M
odif
y:O
Text
(10
)""
"Inc
omin
g Pr
ovis
iona
ble
Ban
dwid
th (K
bits
/s)"
[sr
usag
e.sr
az_b
andw
idth
_t]
Spe
cify
the
inc
omin
g pr
ovis
iona
ble
band
wid
th (
Kbi
ts/s
) fo
r th
is l
ogic
al p
ort.
Cre
ate:
O
M
odif
y:O
Text
(10
)""
"Ava
ilabl
e Co
nnec
tions
" [s
rusa
ge.s
rcon
nect
ions
_a]
Spe
cify
the
ava
ilab
le c
onne
ctio
ns f
or t
his
logi
cal
port
.
Cre
ate:
O
M
odif
y:O
0 -
2147
4836
470
"Out
goin
g Av
aila
ble
Ban
dwid
th (K
bits
/s)"
[sr
usag
e.sr
za_b
andw
idth
_a]
Spe
cify
the
out
goin
g av
aila
ble
band
wid
th (
Kbi
ts/s
) fo
r th
is l
ogic
al p
ort.
Cre
ate:
O
M
odif
y:O
Text
(10
)""
"Out
goin
g Pr
ovis
iona
ble
Ban
dwid
th (K
bits
/s)"
[sr
usag
e.sr
za_b
andw
idth
_t]
Spe
cify
the
inc
omin
g pr
ovis
iona
ble
band
wid
th (
Kbi
ts/s
) fo
r th
is l
ogic
al p
ort.
Cre
ate:
O
M
odif
y:O
Text
(10
)""
"Use
r Lab
el"
[sru
serl
abel
]
The
sru
serl
abel
att
ribu
te is
a f
ree-
form
at te
xt f
ield
that
can
be
used
to h
old
any
text
str
ing,
and
is
inte
nded
as
a pl
ace
whe
re a
cus
tom
er c
an s
tore
OS
S-s
peci
fic
info
rmat
ion.
Cre
ate:
O
M
odif
y:O
P
ersi
sten
t
P
rofi
led
Text
(64
)""
Tab
leA
-35
VP
N L
og
ica
l P
ort
- a
ttri
bu
tes (
co
nti
nu
ed
)
Attr
ibut
e N
ame
Acc
epta
ble
Valu
esD
efau
lt Va
lue
A-61Cisco VPN Solutions Center Equipment Module Configuration Guide
OL-1816-02
Appendix A Attribute ReferenceVPN Logical Port
"Max
imum
(kbi
ts/s
ec)"
[sr
za_b
andw
idth
]
Spe
cify
the
inc
omin
g pr
ovis
iona
ble
band
wid
th (
Kbi
ts/s
) fo
r th
is l
ogic
al p
ort.
Cre
ate:
O
M
odif
y:O
P
ersi
sten
t
P
rofi
led
0 -
2147
4836
4720
0000
"Nom
inal
Thr
esho
ld (%
)" [
srza
_cbn
t]
Spe
cify
the
nom
inal
out
goin
g th
resh
old
perc
enta
ge.
Cre
ate:
O
M
odif
y:O
P
ersi
sten
t
P
rofi
led
0 -
2147
4836
4710
0
"Pro
visi
onab
le (k
bits
/sec
)" [
srza
_cbw
]
Spe
cify
the
out
goin
g co
mm
itte
d ba
ndw
idth
.
Cre
ate:
O
M
odif
y:O
P
ersi
sten
t
P
rofi
led
0 -
2147
4836
4720
0000
"Cus
tom
er"
[vpn
]
Spe
cify
the
cus
tom
er.
Cre
ate:
O
M
odif
y:O
P
ersi
sten
t
P
rofi
led
Text
(16
)""
Tab
leA
-35
VP
N L
og
ica
l P
ort
- a
ttri
bu
tes (
co
nti
nu
ed
)
Attr
ibut
e N
ame
Acc
epta
ble
Valu
esD
efau
lt Va
lue
A-62Cisco VPN Solutions Center Equipment Module Configuration Guide
OL-1816-02
Appendix A Attribute ReferenceVPN SVRC
VPN
SVR
C O
bje
ct C
lass
: C
Vsv
SR
VC
Fil
e N
ame:
CV
svS
RV
C.o
af
Tab
leA
-36
VP
N S
RV
C -
ch
ara
cte
risti
cs
Cla
ss N
ame:
CV
svS
RV
C
Sho
rt C
lass
Nam
e:sv
Cla
ss L
abel
:C
isco
VP
N S
RV
C
Sup
ercl
ass:
SR
snS
ubN
C
Per
sist
ence
:O
WN
Tab
leA
-37
Cis
co
VP
N S
RV
C -
Ali
ases
Alia
sA
ttrib
ute
1A
ttrib
ute
2
srlo
calt
psr
a_tp
srz_
tp
srre
mot
etp
srz_
tpsr
a_tp
ralo
calv
cira
a_vc
ira
z_vc
i
rare
mot
evci
raz_
vci
raa_
vci
ralo
calv
pira
a_vp
ira
z_vp
i
rare
mot
evpi
raz_
vpi
raa_
vpi
rflo
cal_
dlci
rfa_
dlci
rfz_
dlci
rfre
mot
e_dl
cirf
z_dl
cirf
a_dl
ci
A-63Cisco VPN Solutions Center Equipment Module Configuration Guide
OL-1816-02
Appendix A Attribute ReferenceVPN SVRC
Tab
leA
-38
VP
N S
RV
C -
att
rib
ute
s
Attr
ibut
esA
ccep
tabl
e Va
lues
"Ove
rrid
e A
S N
umbe
r" [
cvas
over
ride
]
Spe
cify
whe
ther
or
not
you
wan
use
rs t
o ov
erri
de t
he A
S n
umbe
r
Cre
ate:
O
M
odif
y:O
P
ersi
sten
t
P
rofi
led
BO
OL
EA
Nfa
lse
"Aut
o Pi
ck A
ddre
sses
" [c
vaut
opic
kadd
r]
If th
is a
ttri
bute
is s
et to
Tru
e an
d if
PE
and
CE
maj
or in
terf
aces
are
IP
num
bere
d, th
eir
addr
esse
s w
ill
be p
icke
d fr
om t
he a
ddre
ss p
ools
of
the
regi
ons
to w
hich
the
PE
and
CE
bel
ong.
If
this
at
trib
ute
is s
et to
Tru
e, a
ny v
alue
s se
t thr
ough
set
PE
Inte
rfac
eAdd
ress
and
set
CE
Inte
rfac
eAdd
ress
ar
e ig
nore
d.
Thi
s fl
ag i
s re
set
to f
alse
by
RD
P
Cre
ate:
O
M
odif
y:O
P
ersi
sten
t
P
rofi
led
BO
OL
EA
Nfa
lse
"CE
ATM
VCD
" [c
vce_
vcd]
Spe
cify
the
AT
M V
CD
ran
ge.
Cre
ate:
O
M
odif
y:O
P
ersi
sten
t
P
rofi
led
-1 -
655
36-1
"CE
BG
P A
SN"
[cvc
ebgp
asn]
Thi
s at
trib
ute
is r
equi
red
only
if
the
rout
ing
prot
ocol
bet
wee
n P
E a
nd C
E r
oute
rs i
s se
t to
BG
P.
See
PE
CE
Lin
k P
roto
col
[cvp
ecel
inkp
rtcl
]
Cre
ate:
O
M
odif
y:O
P
ersi
sten
t
P
rofi
led
0 -
2147
4836
470
"CE
Inte
rfac
e Te
mpl
ate
File
" [c
vcei
ntfte
mpl
ate]
Spe
cify
the
CE
int
erfa
ce t
empl
ate
file
nam
e.
Cre
ate:
O
M
odif
y:O
P
ersi
sten
t
P
rofi
led
Text
(64
)""
"CE
IP A
ddre
ss"
[cvc
eipa
ddr]
Spe
cify
the
IP
add
ress
of
the
PE
rou
ter.
If A
uto
Pic
k A
ddre
sses
[cv
auto
pick
addr
] is
set
to
Fals
e, t
hen
IP A
ddre
ss [
cvpe
ipad
dr]
and
[cvc
eipa
ddr]
mus
t no
t be
nul
l an
d cv
peip
addr
and
cvc
eipa
ddr
mus
t be
of
the
form
at
aaa.
bbb.
ccc.
ddd/
mas
k w
here
aaa
.bbb
.ccc
.ddd
is a
val
id I
P a
ddre
ss a
nd m
ask
is a
val
ue f
rom
0 to
29
. Als
o if
cvc
elpb
kreq
is tr
ue, t
hen
chec
k th
at c
vcel
pbka
ddr
is n
ot n
ull a
nd h
as a
cor
rect
for
mat
.
Cre
ate:
O
M
odif
y:O
P
ersi
sten
t
P
rofi
led
Text
(19
)""
"OSP
F CE
Are
a is
Set
as
IP A
ddr"
[cv
ceis
arse
tasi
p]
Spe
cify
whe
ther
or
not
the
OS
PF
are
a is
set
as
an I
P a
ddre
ss o
n th
e C
E r
oute
r.
Cre
ate:
O
M
odif
y:O
P
ersi
sten
t
P
rofi
led
BO
OL
EA
Nfa
lse
A-64Cisco VPN Solutions Center Equipment Module Configuration Guide
OL-1816-02
Appendix A Attribute ReferenceVPN SVRC
"CE
ISL
VLA
N Id
" [c
vcei
sl]
Spe
cify
the
Eth
erne
t IS
L V
LA
N I
D.
Cre
ate:
O
M
odif
y:O
P
ersi
sten
t
P
rofi
led
0 -
1000
0
"Loo
pbac
k A
ddre
ss"
[cvc
elpb
kadd
r]
Spe
cify
the
loo
pbac
k in
terf
ace
addr
ess
for
the
cust
omer
-edg
e ro
uter
.
Cre
ate:
O
M
odif
y:O
P
ersi
sten
t
P
rofi
led
Text
(19
)""
"Loo
pbac
k A
ddre
ss R
equi
red"
[cv
celp
bkre
q]
Spe
cify
whe
ther
or
not
a lo
opba
ck i
nter
face
is
requ
ired
on
the
CE
rou
ter.
Cre
ate:
O
M
odif
y:O
P
ersi
sten
t
P
rofi
led
BO
OL
EA
Nfa
lse
"OSP
F CE
Are
a #"
[cv
ceos
pfar
ea]
Spe
cify
the
OS
PF
are
a nu
mbe
r on
the
CE
rou
ter.
Cre
ate:
O
M
odif
y:O
P
ersi
sten
t
P
rofi
led
0 -
2147
4836
470
"OSP
F CE
Are
a as
IP A
ddr"
[cv
ceos
pfas
ipad
dr]
Spe
cify
the
OS
PF
are
a nu
mbe
r w
hich
is
set
by u
sing
an
IP a
ddre
ss o
n th
e C
E r
oute
r.
Cre
ate:
O
M
odif
y:O
P
ersi
sten
t
P
rofi
led
Text
(19
)""
"OSP
F CE
Pro
cess
Id"
[cvc
eosp
fpri
d]
Spe
cify
the
OS
PF
pro
cess
ID
on
the
CE
rou
ter.
Cre
ate:
O
M
odif
y:O
P
ersi
sten
t
P
rofi
led
0 -
6553
50
"CE
SubI
nter
face
Num
ber"
[cv
cesu
bnum
]
Spe
cify
the
sub
-int
erfa
ce n
umbe
r fo
r th
is d
evic
e.
Cre
ate:
O
M
odif
y:O
P
ersi
sten
t
P
rofi
led
-1 -
214
7483
647
0
"CE
Tem
plat
e Fi
le"
[cvc
etem
plat
e]
Spe
cify
the
CE
tem
plat
e fi
lena
me.
Cre
ate:
O
M
odif
y:O
P
ersi
sten
t
P
rofi
led
Text
(64
)""
"Red
istr
ibut
e Co
nnec
ted"
[cv
conn
ectr
edis
tr]
Spe
cify
whe
ther
or
not
the
conn
ecte
d ro
utes
on
the
PE
rou
ter
wil
l be
red
istr
ibut
ed.
Cre
ate:
O
M
odif
y:O
P
ersi
sten
t
P
rofi
led
BO
OL
EA
Nfa
lse
Tab
leA
-38
VP
N S
RV
C -
att
rib
ute
s (
co
nti
nu
ed
)
Attr
ibut
esA
ccep
tabl
e Va
lues
A-65Cisco VPN Solutions Center Equipment Module Configuration Guide
OL-1816-02
Appendix A Attribute ReferenceVPN SVRC
"CoS
Prof
ile"
[cvc
ospr
ofile
.srn
ame]
Spe
cify
the
Vsm
CoS
Pro
file
Cre
ate:
O
M
odif
y:P
P
ersi
sten
t
Text
(32
)""
"Cre
atio
n tim
e" [
cvcr
eatio
ntim
e]
Spe
cify
the
tim
e th
at t
he V
PN
SC
tem
plat
e w
as c
reat
ed.
Cre
ate:
P
M
odif
y:P
P
ersi
sten
t
P
rofi
led
Text
(32
)""
"Cre
ator
" [c
vcre
ator
]
Spe
cify
the
typ
e of
VP
N S
C t
empl
ate
crea
tor.
Cre
ate:
P
M
odif
y:P
P
ersi
sten
t
P
rofi
led
Text
(32
)""
" " [
cvcu
stom
er]
Rel
atio
n of
Typ
e PA
RE
NT,
Rel
atio
n C
lass
Nam
e =
CV
crC
usto
mer
Thi
s is
the
con
tain
ing
cust
omer
rou
ter
Cre
ate:
O
M
odif
y:O
"Cus
tom
er"
[cvc
usto
mer
.srn
ame]
Thi
s is
the
con
tain
ing
cust
omer
rou
ter
Cre
ate:
O
M
odif
y:P
P
ersi
sten
t
Text
(32
)""
"Ele
men
t Id"
[cv
elem
id]
Thi
s is
aut
omat
ical
ly s
et t
o th
e nu
mer
ic p
orti
on o
f th
e ob
ject
ID
. Thi
s at
trib
ute
is u
sed
as a
n ex
tens
ion
for
tran
slat
ed t
empl
ate
file
s.
Cre
ate:
O
M
odif
y:O
P
ersi
sten
t
P
rofi
led
0 -
2147
4836
470
"Exp
ort M
ap"
[cve
xpor
tmap
]
Spe
cify
the
nam
e of
the
exp
ort
map
.
Cre
ate:
O
M
odif
y:O
P
ersi
sten
t
P
rofi
led
Text
(64
)""
"Mod
em H
elpe
r Add
r" [
cvhe
lper
addr
]
Spe
cify
the
IP
add
ress
of
the
DH
CP
ser
ver
in t
he M
SO
net
wor
k.
Cre
ate:
O
M
odif
y:O
P
ersi
sten
t
P
rofi
led
Text
(19
)""
"Hos
t Hel
per A
ddr"
[cv
host
help
erad
]
Spe
cify
the
IP
add
ress
of
the
DH
CP
ser
ver
of t
he I
SP.
Cre
ate:
O
M
odif
y:O
P
ersi
sten
t
P
rofi
led
Text
(19
)""
Tab
leA
-38
VP
N S
RV
C -
att
rib
ute
s (
co
nti
nu
ed
)
Attr
ibut
esA
ccep
tabl
e Va
lues
A-66Cisco VPN Solutions Center Equipment Module Configuration Guide
OL-1816-02
Appendix A Attribute ReferenceVPN SVRC
"Im
port
Map
" [c
vim
port
map
]
Spe
cify
the
nam
e of
the
im
port
map
.
Cre
ate:
O
M
odif
y:O
P
ersi
sten
t
P
rofi
led
Text
(64
)""
"IP
Unn
umbe
red"
[cv
ipun
num
bere
d]
Spe
cify
the
IP
Unn
umbe
r.
Cre
ate:
O
M
odif
y:O
P
ersi
sten
t
P
rofi
led
Inte
rfIP
Num
bere
d |
Inte
rfP
EC
EIP
Unn
umbe
red
Inte
rfIP
Num
bere
d
"Is
Mai
nten
Intf
set"
[cv
ism
aint
enin
t]
Spe
cify
whe
ther
or
not
the
mai
nten
ance
hel
per
addr
ess
is t
o be
set
.
Cre
ate:
O
M
odif
y:O
P
ersi
sten
t
P
rofi
led
BO
OL
EA
Nfa
lse
"Las
t cha
nge
time"
[cv
last
chan
getim
e]
Spe
cify
the
las
t ch
ange
tim
e of
the
SR
VC
.
Cre
ate:
O
M
odif
y:O
P
ersi
sten
t
P
rofi
led
Text
(32
)""
"Mai
nten
Hel
per A
ddr"
[cv
mai
nthe
lper
ad]
Spe
cify
the
IP
add
ress
of
the
DH
CP
ser
ver
of t
he M
SO
net
wor
k.
Cre
ate:
O
M
odif
y:O
P
ersi
sten
t
P
rofi
led
Text
(19
)""
"Max
imum
ASN
in P
ath"
[cv
max
asin
path
]
Spe
cify
the
max
imum
num
ber
of t
imes
a s
peci
fic
auto
nom
ous
syst
em (
AS
) nu
mbe
r ca
n ap
pear
in
the
rou
ting
pat
h be
fore
rer
outi
ng a
dat
a pa
cket
.
Cre
ate:
O
M
odif
y:O
P
ersi
sten
t
P
rofi
led
0 -
2147
4836
470
"Max
imum
Rou
tes
in V
RF T
able
" [c
vmax
rout
es]
Spe
cify
the
max
imum
num
ber
of r
oute
s fo
r th
e V
RF
tabl
e to
acc
ept.
As
a de
faul
t, th
e V
FR
tabl
e ac
cept
s a
num
ber
of r
oute
s th
at i
s li
mit
ed o
nly
by y
our
syst
em r
esou
rces
.
Cre
ate:
O
M
odif
y:O
P
ersi
sten
t
P
rofi
led
0 -
2147
4836
470
"Mem
ber o
f Gre
y M
anag
emen
t VPN
" [c
vmem
grey
vpn]
Spe
cify
whe
ther
or
not t
he C
E r
oute
r is
to
be a
dded
as
a m
embe
r of
the
gre
y m
anag
emen
t V
PN
.
Cre
ate:
O
M
odif
y:O
P
ersi
sten
t
P
rofi
led
BO
OL
EA
Nfa
lse
"Net
wor
k Fl
ow A
ccou
ntin
g" [
cvne
tflow
acco
n]
Spe
cify
whe
ther
or
not
you
wan
t to
ena
ble
this
fea
ture
.
Cre
ate:
O
M
odif
y:O
P
ersi
sten
t
P
rofi
led
BO
OL
EA
Nfa
lse
Tab
leA
-38
VP
N S
RV
C -
att
rib
ute
s (
co
nti
nu
ed
)
Attr
ibut
esA
ccep
tabl
e Va
lues
A-67Cisco VPN Solutions Center Equipment Module Configuration Guide
OL-1816-02
Appendix A Attribute ReferenceVPN SVRC
"PE
ATM
VCD
" [c
vpe_
vcd]
Spe
cify
the
AT
M V
CD
ran
ge.
Cre
ate:
O
M
odif
y:O
P
ersi
sten
t
P
rofi
led
-1 -
655
36-1
"PEC
E Li
nk P
roto
col"
[cv
pece
linkp
rtcl
]
Spe
cify
the
PE
to
CE
lin
k pr
otoc
ol.
Cre
ate:
O
M
odif
y:O
P
ersi
sten
t
P
rofi
led
Unk
now
nRou
ting
Type
| S
tati
cRou
ting
Type
| R
IPv2
Rou
ting
Type
| B
GP
Rou
ting
Type
| O
SP
FR
outi
ngTy
pe |
NoR
outi
ngR
equi
redT
ype
Unk
now
nRou
ting
Type
"PE
Inte
rfac
e Te
mpl
ate
File
" [c
vpei
ntfte
mpl
ate]
Spe
cify
the
PE
int
erfa
ce t
empl
ate
file
nam
e.
Cre
ate:
O
M
odif
y:O
P
ersi
sten
t
P
rofi
led
Text
(64
)""
"PE
IP A
ddre
ss"
[cvp
eipa
ddr]
Spe
cify
the
IP
add
ress
of
the
PE
rou
ter.
If A
uto
Pic
k A
ddre
sses
[cv
auto
pick
addr
] is
set
to
Fals
e, t
hen
IP A
ddre
ss [
cvpe
ipad
dr]
and
[cvc
eipa
ddr]
mus
t no
t be
nul
l an
d cv
peip
addr
and
cvc
eipa
ddr
mus
t be
of
the
form
at
aaa.
bbb.
ccc.
ddd/
mas
k w
here
aaa
.bbb
.ccc
.ddd
is a
val
id I
P a
ddre
ss a
nd m
ask
is a
val
ue f
rom
0 to
29
. Als
o if
cvc
elpb
kreq
is tr
ue, t
hen
chec
k th
at c
vcel
pbka
ddr
is n
ot n
ull a
nd h
as a
cor
rect
for
mat
.
Cre
ate:
O
M
odif
y:O
P
ersi
sten
t
P
rofi
led
Text
(19
)""
"OSP
F PE
Are
a is
Set
as
IP A
ddr"
[cv
peis
arse
tasi
p]
Spe
cify
whe
ther
or
not
the
OS
PF
are
a is
set
as
an I
P a
ddre
ss o
n th
e P
E r
oute
r.
Cre
ate:
O
M
odif
y:O
P
ersi
sten
t
P
rofi
led
BO
OL
EA
Nfa
lse
"PE
ISL
VLA
N Id
" [c
vpei
sl]
Spe
cify
the
Eth
erne
t IS
L V
LA
N I
D.
Cre
ate:
O
M
odif
y:O
P
ersi
sten
t
P
rofi
led
0 -
1000
0
"OSP
F PE
Are
a #"
[cv
peos
pfar
ea]
Spe
cify
the
OS
PF
are
a nu
mbe
r on
the
PE
rou
ter.
Cre
ate:
O
M
odif
y:O
P
ersi
sten
t
P
rofi
led
0 -
2147
4836
470
"OSP
F PE
Are
a as
IP A
ddr"
[cv
peos
pfas
ipad
dr]
Spe
cify
the
OS
PF
are
a nu
mbe
r w
hich
is
set
by u
sing
an
IP a
ddre
ss o
n th
e P
E r
oute
r.
Cre
ate:
O
M
odif
y:O
P
ersi
sten
t
P
rofi
led
Text
(19
)""
Tab
leA
-38
VP
N S
RV
C -
att
rib
ute
s (
co
nti
nu
ed
)
Attr
ibut
esA
ccep
tabl
e Va
lues
A-68Cisco VPN Solutions Center Equipment Module Configuration Guide
OL-1816-02
Appendix A Attribute ReferenceVPN SVRC
"OSP
F PE
Pro
cess
Id"
[cvp
eosp
fpri
d]
Spe
cify
the
OS
PF
pro
cess
ID
on
the
PE
rou
ter.
Cre
ate:
O
M
odif
y:O
P
ersi
sten
t
P
rofi
led
0 -
6553
50
"PE
SubI
nter
face
Num
ber"
[cv
pesu
bnum
]
Spe
cify
the
int
erfa
ce s
ub-n
umbe
r
Cre
ate:
O
M
odif
y:O
P
ersi
sten
t
P
rofi
led
-1 -
214
7483
647
0
"PE
Tem
plat
e Fi
le"
[cvp
etem
plat
e]
Spe
cify
the
PE
tem
plat
e fi
le n
ame.
Cre
ate:
O
M
odif
y:O
P
ersi
sten
t
P
rofi
led
Text
(64
)""
"Sen
d O
nly
Def
ault
Rout
es"
[cvs
endo
nlyd
efrt
e]
Spe
cify
whe
ther
the
CE
rou
ter
wil
l us
e fu
ll r
outi
ng o
r de
faul
t ro
utin
g. A
dev
ice
can
have
onl
y on
e de
faul
t rou
te s
o th
is a
ttri
bute
can
be
set o
nly
if th
e C
E r
oute
r do
es n
ot a
lrea
dy h
ave
a de
faul
t ro
ute.
Cre
ate:
O
M
odif
y:O
P
ersi
sten
t
P
rofi
led
BO
OL
EA
Nfa
lse
"Sta
te"
[cvs
tate
]
Thi
s is
the
VP
N S
C S
RV
C s
tate
.
Cre
ate:
P
M
odif
y:P
P
ersi
sten
t
P
rofi
led
Text
(24
)""
"Red
istr
ibut
e St
atic
" [c
vsta
ticre
dist
r]
Spe
cify
whe
ther
or
not
the
stat
ic r
oute
s on
PE
rou
ter
wil
l be
red
istr
ibut
ed.
Cre
ate:
O
M
odif
y:O
P
ersi
sten
t
P
rofi
led
BO
OL
EA
Nfa
lse
"Use
r" [
cvus
er]
Spe
cify
the
use
r na
me
of t
he u
ser
who
cre
ated
the
SR
VC
.
Cre
ate:
O
M
odif
y:O
P
ersi
sten
t
P
rofi
led
Text
(32
)""
"VRF
Nam
e" [
cvvr
fnam
e]
If s
et a
t cr
eate
tim
e, V
RF
and
RD
Nam
e m
ust
also
be
set
to f
orm
the
VR
F n
ame.
Oth
erw
ise
the
VR
F n
ame
is a
uto-
gene
rate
d by
VP
N S
C a
nd th
e V
RF
nam
e is
upl
oade
d fr
om V
PN
SC
via
RD
P.
Cre
ate:
O
M
odif
y:P
P
ersi
sten
t
P
rofi
led
Text
(64
)""
Tab
leA
-38
VP
N S
RV
C -
att
rib
ute
s (
co
nti
nu
ed
)
Attr
ibut
esA
ccep
tabl
e Va
lues
A-69Cisco VPN Solutions Center Equipment Module Configuration Guide
OL-1816-02
Appendix A Attribute ReferenceVPN SVRC
"VRF
and
RD
Nam
e" [
cvvr
fnam
erd]
Spe
cify
the
rou
te d
isti
ngui
sher
(R
D)
valu
e. I
f no
t se
t, t
he V
RF
nam
e an
d R
D v
alue
wil
l be
au
to-g
ener
ated
. If
VR
F n
ame
(cvv
rfna
me)
is s
et, t
hen
RD
val
ue m
ust a
lso
be s
et, a
nd v
ice
vers
a.
If th
is s
ervi
ce r
eque
st in
volv
es a
man
agem
ent C
E, a
gre
y m
anag
emen
t VP
N is
als
o cr
eate
d at
the
sam
e ti
me
the
serv
ice
requ
est
is c
reat
ed. I
n th
is c
ase,
ove
rwri
ting
VR
F n
ame
and
RD
is
disa
llow
ed s
ince
the
VR
F n
ame
of t
he g
rey
man
agem
ent
VP
N i
s a
spec
ial
nam
e th
at i
s al
way
s au
to-g
ener
ated
.
Cre
ate:
O
M
odif
y:P
P
ersi
sten
t
P
rofi
led
Text
(64
)""
"MD
" [d
omai
n]
Spe
cify
the
man
agem
ent
dom
ain.
Cre
ate:
O
M
odif
y:O
P
ersi
sten
t
P
rofi
led
Text
(16
)""
"PE
ATM
VCI
" [r
aa_v
ci]
Ali
as:
ralo
calv
ci (
othe
r at
trib
ute:
raz
_vci
)
Ali
as:
rare
mot
evci
(ot
her
attr
ibut
e: r
az_v
ci)
Spe
cify
the
AT
M V
CI
rang
e.
Cre
ate:
O
M
odif
y:O
P
ersi
sten
t
P
rofi
led
-2 -
655
36-1
"PE
ATM
VPI
" [r
aa_v
pi]
Ali
as:
ralo
calv
pi (
othe
r at
trib
ute:
raz
_vpi
)
Ali
as:
rare
mot
evpi
(ot
her
attr
ibut
e: r
az_v
pi)
Spe
cify
the
AT
M V
PI
rang
e.
Cre
ate:
O
M
odif
y:O
P
ersi
sten
t
P
rofi
led
-2 -
655
36-1
"CE
ATM
VCI
" [r
az_v
ci]
Ali
as:
ralo
calv
ci (
othe
r at
trib
ute:
raa
_vci
)
Ali
as:
rare
mot
evci
(ot
her
attr
ibut
e: r
aa_v
ci)
Spe
cify
the
AT
M V
CI
rang
e.
Cre
ate:
O
M
odif
y:O
P
ersi
sten
t
P
rofi
led
-2 -
655
36-1
Tab
leA
-38
VP
N S
RV
C -
att
rib
ute
s (
co
nti
nu
ed
)
Attr
ibut
esA
ccep
tabl
e Va
lues
A-70Cisco VPN Solutions Center Equipment Module Configuration Guide
OL-1816-02
Appendix A Attribute ReferenceVPN SVRC
"CE
ATM
VPI
" [r
az_v
pi]
Ali
as:
ralo
calv
pi (
othe
r at
trib
ute:
raa
_vpi
)
Ali
as:
rare
mot
evpi
(ot
her
attr
ibut
e: r
aa_v
pi)
Spe
cify
the
AT
M V
PI
rang
e.
Cre
ate:
O
M
odif
y:O
P
ersi
sten
t
P
rofi
led
-2 -
655
36-1
"PE
FR D
LCI"
[rf
a_dl
ci]
Ali
as:
rflo
cal_
dlci
(ot
her
attr
ibut
e: r
fz_d
lci)
Ali
as:
rfre
mot
e_dl
ci (
othe
r at
trib
ute:
rfz
_dlc
i)
Spe
cify
the
FR
DL
CI
rang
e.
Cre
ate:
O
M
odif
y:O
P
ersi
sten
t
P
rofi
led
-2 -
655
36-1
"CE
FR D
LCI"
[rf
z_dl
ci]
Ali
as:
rflo
cal_
dlci
(ot
her
attr
ibut
e: r
fa_d
lci)
Ali
as:
rfre
mot
e_dl
ci (
othe
r at
trib
ute:
rfa
_dlc
i)
Spe
cify
the
FR
DL
CI
rang
e.
Cre
ate:
O
M
odif
y:O
P
ersi
sten
t
P
rofi
led
-2 -
655
36-1
" " [
sra_
tp]
Ali
as:
srlo
calt
p (o
ther
att
ribu
te:
srz_
tp)
Ali
as:
srre
mot
etp
(oth
er a
ttri
bute
: sr
z_tp
)
Rel
atio
n of
Typ
e R
EQ
UIR
ED
, Rel
atio
n C
lass
Nam
e =
SR
lpL
ogic
alP
ort
Thi
s is
the
loc
al a
-end
poin
t.
Cre
ate:
O
M
odif
y:O
"PE
LPor
t" [
sra_
tp.s
rnam
e]
Spe
cify
the
att
ache
d P
E l
ogic
al p
ort.
Cre
ate:
P
M
odif
y:P
P
ersi
sten
t
Text
(32
)""
"PE
Rout
er"
[sra
_tp.
srno
de.s
rnam
e]
Thi
s is
the
nod
e co
ntai
ning
the
A-e
ndpo
int.
Cre
ate:
P
M
odif
y:P
P
ersi
sten
t
Text
(32
)""
Tab
leA
-38
VP
N S
RV
C -
att
rib
ute
s (
co
nti
nu
ed
)
Attr
ibut
esA
ccep
tabl
e Va
lues
A-71Cisco VPN Solutions Center Equipment Module Configuration Guide
OL-1816-02
Appendix A Attribute ReferenceVPN SVRC
"VPN
SC
Id"
[srn
ame]
Nam
e of
the
log
ical
por
t.
Cre
ate:
P
M
odif
y:P
P
ersi
sten
t
P
rofi
led
Text
(33
)"0
"
"Net
wor
k" [
srne
twor
k.sr
nam
e]
Spe
cify
the
net
wor
k th
at c
onta
ins
this
reg
ion
Cre
ate:
P
M
odif
y:P
P
ersi
sten
t
Text
(32
)""
" " [
srz_
tp]
Ali
as:
srlo
calt
p (o
ther
att
ribu
te:
sra_
tp)
Ali
as:
srre
mot
etp
(oth
er a
ttri
bute
: sr
a_tp
)
Rel
atio
n of
Typ
e R
EQ
UIR
ED
, Rel
atio
n C
lass
Nam
e =
SR
lpL
ogic
alP
ort
Thi
s is
the
rem
ote
z-en
dpoi
nt.
Cre
ate:
O
M
odif
y:O
"CE
LPor
t" [
srz_
tp.s
rnam
e]
Spe
cify
the
att
ache
d C
E l
ogic
al p
ort.
Cre
ate:
P
M
odif
y:P
P
ersi
sten
t
Text
(32
)""
"CE
Rout
er"
[srz
_tp.
srno
de.s
rnam
e]
Thi
s is
the
nod
e co
ntai
ning
the
Z-e
ndpo
int.
Cre
ate:
P
M
odif
y:P
P
ersi
sten
t
Text
(32
)""
"VPN
" [v
pn]
Spe
cify
the
cus
tom
er.
Cre
ate:
O
M
odif
y:O
P
ersi
sten
t
P
rofi
led
Text
(16
)""
Tab
leA
-38
VP
N S
RV
C -
att
rib
ute
s (
co
nti
nu
ed
)
Attr
ibut
esA
ccep
tabl
e Va
lues
A-72Cisco VPN Solutions Center Equipment Module Configuration Guide
OL-1816-02
Appendix A Attribute ReferenceVPN CERC Membership
Defaul
""
Spoke
""
""
VPN CERC Membership Object Class: CVmrCERCMembership
File Name: CVmrCERCMembership.oaf
Table A-39 CERC Membership - characteristics
Class Name: CVmrCERCMembership
Short Class Name: mr
Class Label: Cisco VPN CERCMembership
Superclass:
Persistence: OWN
Table A-40 CERC Membership - attributes
Attributes Acceptable Values
" " [cvcerc]
Relation of Type REQUIRED, Relation Class Name = CVrrCERC
Specify the CERC associated with the ID generated by VPN SC
Create:O Modify:O
"CERC" [cvcerc.cvid]
Specify the CERC associated with the ID generated by VPN SC
Create:O Modify:P Persistent
Text (32)
"Hub or Spoke" [cvhuborspoke]
Specify the CERC membership configuration.
Create:O Modify:P Persistent Profiled
Hub | Spoke
" " [cvsrvc]
Relation of Type PARENT, Relation Class Name = CVsvSRVC
Specify the SRVC that contains this CERC membership.
Create:O Modify:O
"SRVC" [cvsrvc.srname]
Specify the SRVC that contains this CERC membership.
Create:O Modify:P Persistent
Text (32)
"MD" [domain]
Specify the management domain.
Create:O Modify:O Persistent Profiled
Text (16)
A-73Cisco VPN Solutions Center Equipment Module Configuration Guide
OL-1816-02
Appendix A Attribute ReferenceVPN CERC Membership
"
efault Va
"Service Request" [srsoid]
Relation of Type OPTIONAL, Relation Class Name = SRsoServiceObject
The service object ID of the SRVC.
Create:O Modify:O
"VPN" [vpn]
Specify the customer.
Create:O Modify:O Persistent Profiled
Text (16) "
Table A-40 CERC Membership - attributes (continued)
Attributes Acceptable Values D
A-74Cisco VPN Solutions Center Equipment Module Configuration Guide
OL-1816-02
Appendix A Attribute ReferenceVPN Redistributed Protocol
Defaul
""
static
""
""
""
VPN Redistributed Protocol Object Class: CVrpRedistributedPrtcl
File Name: CVrpRedistributedPrtcl.oaf
Table A-41 Redistributed Protocol - characteristics
Class Name: CVrpRedistributedPrtcl
Short Class Name: rp
Class Label: Cisco VPN RedistributedPrtcl
Superclass:
Persistence: OWN
Table A-42 Redistributed Protocol - attributes
Attributes Acceptable Values
"Redistributed Protocol Parameter" [cvnumber]
Specify the ASN, identifier or process number.
Create:O Modify:P Persistent Profiled
Text (10)
"Protocol" [cvprotocol]
Specify the protocol.This is required only when configuring CE to use RIP or BGP, and when the given protocol is to learn its routing information via redistribution. Each entry should contain name of one protocol. If the protocol requires an autonomous system, it should be included also (for example: BGP 69).
Create:O Modify:P Persistent Profiled
static | connected | rip | bgp | igrp | ospf | eigrp | isis
"SRVC" [cvsrvc.srname]
Specify the containing SRVC.
Create:O Modify:P Persistent
Text (32)
"MD" [domain]
Specify the management domain.
Create:O Modify:O Persistent Profiled
Text (16)
"VPN" [vpn]
Specify the customer.
Create:O Modify:O Persistent Profiled
Text (16)
A-75Cisco VPN Solutions Center Equipment Module Configuration Guide
OL-1816-02
Appendix A Attribute ReferenceVPN Route
efault Va
"
"
dvertised
"
"
VPN Route Object Class: CVrtRoutes
File Name: CVrtRoutes.oaf
Table A-43 VPN Route - characteristics
Class Name: CVrtRoutes
Short Class Name: rt
Class Label: Cisco VPN Route
Superclass:
Persistence: OWN
Table A-44 VPN Route - attributes
Attributes Acceptable Values D
"Route" [cvaddress]
Specify the route address. This attribute must be unique within a region and must be of the format aaa.bbb.ccc.ddd/mask where aaa.bbb.ccc.ddd is a valid IP address and the mask is a value from 0 to 32
Create:O Modify:O Persistent Profiled
Text (64) "
"SRVC" [cvsrvc.srname]
Specify the containing SRVC.
Create:O Modify:O Persistent
Text (32) "
"Type" [cvtype]
Specify the route type.
Create:O Modify:O Persistent Profiled
AdvertisedRoute | RouteAddress
A
"MD" [domain]
Specify the management domain.
Create:O Modify:O Persistent Profiled
Text (16) "
"VPN" [vpn]
Specify the customer.
Create:O Modify:O Persistent Profiled
Text (16) "
A-76Cisco VPN Solutions Center Equipment Module Configuration Guide
OL-1816-02
Appendix A Attribute ReferenceVPN Secondary Address
Defaul
""
""
""
""
VPN Secondary Address Object Class: CVshSecondAddress
File Name: CVshSecondAddress.oaf
Table A-45 VPN Cable Secondary Address - characteristics
Class Name: CVshSecondAddress
Short Class Name: sh
Class Label: Cisco VPN Cable Secondary Address
Superclass:
Persistence: OWN
Table A-46 VPN Cable Secondary Address - attributes
Attributes Acceptable Values
"Address" [cvsecaddr]
Specify the secondary IP address. · cvsecaddr must be of the format aaa.bbb.ccc.ddd/mask where aaa.bbb.ccc.ddd is a valid IP Address and mask is a value from 0 to 32
Create:O Modify:P Persistent Profiled
Text (19)
"SRVC" [cvsrvc.srname]
Specify the containing SRVC.
Create:O Modify:P Persistent
Text (32)
"MD" [domain]
Specify the management domain.
Create:O Modify:O Persistent Profiled
Text (16)
"VPN" [vpn]
Specify the customer.
Create:O Modify:O Persistent Profiled
Text (16)
A-77Cisco VPN Solutions Center Equipment Module Configuration Guide
OL-1816-02
Appendix A Attribute ReferenceVPN SC Template
efault Va
emplateA
"
ERouter
"
emplateS
"
"
"
VPN SC Template Object Class: CVvtVPNSCTemplate
File Name: CVvtVPNSCTemplate.oaf
Table A-47 VPN SC Template - characteristics
Class Name: CVvtVPNSCTemplate
Short Class Name: vt
Class Label: Cisco VPNSC Template
Superclass:
Persistence: OWN
Table A-48 VPN SC Template - attributes
Attributes Acceptable Values D
"Action" [cvaction]
Specify the action to taken on the SRVC.
Create:O Modify:O Persistent Profiled
TemplateActionAppend | TemplateActionPrepend
T
"Data File Name" [cvdatafilename]
Specify the VPN SC date file name and full path.
Create:O Modify:O Persistent Profiled
Text (250) "
"Router" [cvrouter]
Specify the router type.
Create:O Modify:O Persistent Profiled
PERouter | CERouter P
"SRVC" [cvsrvc.srname]
Specify the containing SRVC.
Create:O Modify:P Persistent
Text (32) "
"Status" [cvstatus]
Specify the status of the template
Create:O Modify:O Persistent Profiled
TemplateStatusActive | TemplateStatusInactive
T
"Template Name" [cvtemplatename]
Specify the VPN SC template name and full path.
Create:O Modify:O Persistent Profiled
Text (250) "
"MD" [domain]
Specify the management domain.
Create:O Modify:O Persistent Profiled
Text (16) "
"VPN" [vpn]
Specify the customer.
Create:O Modify:O Persistent Profiled
Text (16) "
A-78Cisco VPN Solutions Center Equipment Module Configuration Guide
OL-1816-02
Appendix A Attribute ReferenceVPN SC Template
A-79Cisco VPN Solutions Center Equipment Module Configuration Guide
OL-1816-02
Appendix A Attribute ReferenceVPN SC Template
A-80Cisco VPN Solutions Center Equipment Module Configuration Guide
OL-1816-02
Cisco VPN Solutions Center EOL-1816-02
G L O S S A R Y
A
ADSL Asymmetric Digital Subscriber Line
AS Autonomous System
ASAM ADSL Subscriber Access Line
ATM Asynchronous Transfer Mode
B
BGP Border Gateway Protocol
C
CE Customer Edge (router)
CERC CE Routing Community
CIDR Classless Interdomain Routing
CORBA Common Object Request Broker Architecture
CoS Class of Service
CWM Cisco WAN Manager
D
DSLAM DSL Access Multiplexer
GL-1quipment Module Configuration Guide
Glossary
E
EM Equipment Module
F
FR Frame Relay
FTI Flow-through Interface
I
IETF Internet Engineering Task Force
IP Internet Protocol
IPM Cisco IP Manager
ISL Inter-Switch Link
M
MPLS Multiprotocol Label Switching
O
OSPF Open Shortest Path First
P
PR Provider (Core) Router
PAD Provider Administrative Domain
PE Provider Edge Router
GL-2Cisco VPN Solutions Center Equipment Module Configuration Guide
OL-1816-02
Glossary
R
RD Route Distinguisher
RIP Routing Information Protocol
RM Resource Model
RT Route Target
RTR Response Time Reporter
S
SA Service Application
SLA Service Level Agreement
SRVC Service Request VPN Configuration
V
VPN Virtual Private Network
GL-3Cisco VPN Solutions Center Equipment Module Configuration Guide
OL-1816-02
Cisco VPN Solutions Center EquOL-1816-02
I N D E X
A
about this guide i
address pool attributes A-12
admin domain attributes A-8
ATM logical port attributes A-41
attributes
address pool A-12
admin domain A-8
ATM logical port A-41
CERC A-25
CERC membership A-73
CE Router A-32
CoS A-18
CoS class A-21
customer A-14
FR logical port A-49
PE Router A-27
physical port A-37
redistributed protocol A-75
region A-10
route A-76
secondary address A-77
site A-16
SRVC A-63
standard logical port A-57
VPN network A-5
VPN object A-23
VPN SC templates A-78
auditing service requests 2-7
C
CERC attributes A-25
CERC membership attributes A-73
CE Router attributes A-32
collecting routing information 2-8
configuration
name resolution 1-5
orbix3.cfg 1-4
permissions to CORBA servers 1-4
task logs 1-5
conventions
configuration guide ii
CoS attributes A-18
CoS class attributes A-21
creating
logical port profiles 3-2
customer attributes A-14
custom templates 3-3
D
deleting
logical port profiles 3-3
F
fabric element
uploading network 2-4
FR logical port attributes A-49
IN-1ipment Module Configuration Guide
Index
I
initial system upload 2-1
L
license keys 1-3
logical port
ATM attributes A-41
FR attributes A-49
standard attributes A-57
M
modifying
logical port profiles 3-2
SRVC template behavior 3-6
N
name resolution 1-5
O
Orbix configuration 1-4
P
permissions to VPN SC servers 1-4
PE Router attributes A-27
physical port attributes A-37
profiles
creating 3-2
deleting 3-3
modifying 3-2
service element 3-1
Cisco VOL-1816-02
R
redistributed protocol attributes A-75
region attributes A-10
related documentation ii
repository cleanup utility 1-5
resolution, name 1-5
route attributes A-76
routing information, collecting 2-8
S
secondary addess attributes A-77
server
configuring CORBA 1-4
service element
profiles 3-1
uploading network 2-4
service request auditing 2-7
site attributes A-16
SRVC
attributes A-63
creating with templates 3-3, 3-6
templates 3-3
upload states 2-3
T
task logs 1-4, 1-5
template
behavior 3-6
prototemplate files 3-5
VPN SC 3-4
working with custom 3-3
U
uploading
IN-2PN Solutions Center Equipment Module Configuration Guide
Index
initial system 2-1
network fabric and service elements 2-4
service request audits 2-7
SRVC 2-3
upload states 2-3
utility, repository cleanup 1-5
V
VPN
address pool attributes A-12
ATM logical port attributes A-41
CERC
attributes A-25
membership attributes A-73
CE Router attributes A-32
CoS attributes A-18
CoS class attributes A-21
customer attributes A-14
FR logical port attributes A-49
network attributes A-5
object attributes A-23
PE Router attributes A-27
physical port attributes A-37
redistributed protocol attributes A-75
region attributes A-10
route attributes A-76
secondary address attributes A-77
site attributes A-16
SRVC attributes A-63
standard logical port attributes A-57
template attributes A-78
VPN SC
license keys 1-3
permissions to CORBA servers 1-4
SRVC templates 3-4
templates attributes A-78
Cisco VOL-1816-02
IN-3PN Solutions Center Equipment Module Configuration Guide