if you can imagine it, we can create it
Backpainted glass
ColourXProduct Information
2ColourX Product Information 01233 642 220 [email protected] www.gxglass.com
Contents
3ColourX Product Information 01233 642 220 [email protected] www.gxglass.com
Introduction Backpainted glass provides a sustainable, durable and stylish design solution, perfectly suited to a wide variety of interior glass.
ColourX backpainted glass comes in almost any colour you desire, making it a fully customisable and visually striking surface that is hygienic and easy to maintain - ideal for high traffic areas such as lift lobbies, tea points and kitchen splashbacks.
Our ColourX system can be combined with other products and processes such as digital printing and magnetic glass. The glass can also be pre-processed for fittings or fixing with internal or external cut outs for sockets, urinals, WCs.
Specifying
Installation
In specifying ColourX you get peace of mind that it is not only long-lasting, but also that the product will work with the lifecycle of the building as it will never need to be replaced and is fully recyclable.
Gx Glass also offer a survey and installation process for all our glass, from lift lobbies to splashbacks and we can work with you on your fit-out schedule to ensure your project is completed on time and on budget.
ColourX is five times stronger than non-
toughened glass and is covered by a
two year warranty against discolouration
and delamination, when supplied and
installed by Gx Glass (subject to T&Cs).
ManufactureDepending on the volumes of glass being painted, specialist water-based glass paints are applied to the glass using either a spray or roller coating method. The end-to-end process is managed in-house, providing peace of mind that your glass is under our complete control.
ColourX has a dedicated paint sample library and quality control process, so all painted panels produced over the course of a project are of a consistent shade. We use a unique digital scanning technology to create an approved control colour sample to match against. This is kept on file for any future work requiring the same colour.
5x STRONGER
Colours and finishesColourX paint is available in standard, metallic and sparkle finishes and it is applied to low iron extra clear glass as standard. This glass is practically colourless, making it the perfect glass for delivering true colour.
Our in-house paint process provides flexibility to choose your own colour, either from an established colour system or using colour-scanning technology to match a specific colour sample.
End usesColourX can be used for the following applications:
• Splashbacks, cladding and partitions
• Desktops
• Glass whiteboards
• Tea points
• Reception areas and lift lobbies
• Recycling points
• Cabinet fronts
4ColourX Product Information 01233 642 220 [email protected] www.gxglass.com
Product specificationGLASS OPTIONS • Low iron (no green tint / ultra-clear)
• Standard float glass (slight green tint will show on any chosen colour)
• Satin finish (6mm only)
SAFETY AND STANDARDS
• Impact resistant to EN12600 class 1 (mode of breakage type C)
• Fire rated - Surface spread of flame BS 476 part 7 class 1 - Fire propagation part 6 index 1 - Combine class O fire rating
• Toughened to EN12150 - Breaks cleanly through the thickness of the glass leaving no splinters or shards
FIXING REQUIREMENTS (IF APPLICABLE) • Adhesive fixed - When used as cladding, ColourX is most commonly adhesive fixed to a suitable non-absorbent and smooth prepared substrate using a neutral curing silicone from our approved list. - ColourX can also be mechanically fixed, subject to manufacturing tolerances
LEAD TIMES • The standard lead time for up to 30 panels of ColourX is 7-10 working days.
• Quantities over this volume will be quoted on a case-by-case basis.
PANEL SIZES
• Minimum - 160 x 220mm
• Maximum - 1730 x 3150mm
THICKNESS
• 6mm as standard • 4-19mm (subject to availability)
WEIGHT
• 6mm glass weighs 15kgs/m2
FACE MATERIAL
• N/A
COLOURS
• RAL
• RAL Design
• NCS
• BS
BACK MATERIAL
• Painted layer
• Vinyl backing
EDGE TREATMENT
• Machine polished edge is painted to the back arris as standard
• Edges can be painted if required
• A clean edge finish is available on request
JOINT TREATMENT
• Passing joint
• Butt joint
• Mitres available on request
EDGE OPTIONS • Straight line polished all round (PAR)
• Arrised all round (AAR)
• Ground all round (GAR)
• CNC all round (CNC)
• Pantone C
• Dulux
• Farrow & Ball
• CMYK
5ColourX Product Information 01233 642 220 [email protected] www.gxglass.com
SURFACE FINISHES • ClearShield Eco-SystemTM protective coating
• Sandblasting
• Vinyl backing as standard on cladding to avoid adhesive shadowing / protect glass on site
ADDITIONAL FINISHES
• CeramX-Digital
• MagnX magnetically receptive glass
• Decorative glass laminates
PROCESSING OPTIONS • CNC / CAD shaping
• Bevelling
• Drilled holes
• Waterjet cut-outs
• Notches
• Laminating
ANCILLARY PRODUCTS
• Bumpons for furniture tops
WARRANTY
• Two years supply only on discolouration or loss of adhesion, subject to terms and conditions
• Two years supply and installation on discolouration or loss of adhesion, subject toterms and conditions
BIM OBJECTS
• NBS Specification
• ColourX-S 6mm
Product specification
6ColourX Product Information 01233 642 220 [email protected] www.gxglass.com
For further information on our processing and manufactur-ing tolerances and visual quality parameters, please see our Information Manual.
PRODUCT TESTING
• For further information on our product testing, please see our separate properties sheet.
PROTOTYPING
• On large or complex projects we recommend using our Gx Bespoke Service to prototype samples for sign-off and final approval.
RECOMMENDED USES
• ColourX is intended for internal use only.• ColourX is suitable for use in kitchens, bathrooms and washrooms when edges are fully sealed.
• ColourX normally has a 2mm gap all round ready to accept the final silicon pointing, which is carried out once all other trades have completed their work, this is to avoid any contamination of the final pointing works, before it has set.
• ColourX corner details can be overlapped or mitred.
Additional information
Artwork requirementsWhen supplying artwork for printing or sandblasting our specification is as follows:
Images / Bitmaps (printing only):
• 300 dpi minimum
• CMYK
• .jpg .psd or .tiff
Graphics / Vectors (printing and sandblasting):
• CMYK
• .eps or .AI
Please ensure that all proofs are final, that text is converted to vector outlines and any compound paths or clipping masks have been applied and expanded where necessary.
For more information on artwork requirements please see our Information Manual.
Cleaning and aftercareWith ColourX and all other types of glass panel any spillages and stains should be cleaned off immediately to avoid permanent marking of the glass.
In most cases glass can be washed using just plenty of clean water. Sometimes a bit of mild, neutral detergent or a dedicated glass cleaner can be used, and this can be a commercial glass cleaner.
The recommended cleaning materials are either a soft paper wipe or lint-free cloth, both of which should be new.
To avoid scratching the glass surface no abrasive materials should be used. Do not try to remove marks or debris while the glass is dry.
When removing fat or greasy streaks (e.g. fingerprints), the cleaning agents should always be applied onto the full glass surface.
Ensure any cleaning product is wiped off straight away - it should not be left to dry on the glass and care should be taken to prevent the cleaning product from running over the edges of the glass and into the gaps around it, as this can damage the seals or the painted side of the glass.
For full operation and maintenance see our Information Manual.
Fixing requirements
• ColourX can be dry fitted with screw fixings or with ‘J’ trims.
• ColourX can be supplied with infills for use with socket cut outs.
TOLERANCES AND VISUAL QUALITY
7ColourX Product Information 01233 642 220 [email protected] www.gxglass.com
Gallery
8
Gx Glass provides a full range of flat glass products and services designed to meet the needs of today’s contract and commercial interiors.
With quality and peace of mind at the heart of our offering, along with extensive manufacturing capabilities, the best in materials and technical knowledge, and 38 years of experience, we provide inspirational glass solutions for projects across the fit-out and joinery, furniture, and contract kitchens and bathroom industries.
EstimatingProject ManagementGx Bespoke Service • Specification • PrototypingSurvey and InstallationDesign and Volume-led ManufacturingGlass Express ServiceAdaptable Delivery and LogisticsSamples
ProductsCOLOURX® BACKPAINTED GLASS
ColourX® backpainted glass gives you infinite colour choice in a modern, durable and stylish glass solution perfectly suited for a wide variety of interior glass applications.
MAGNX® MAGNETIC GLASS RANGE
MagnX® magnetic glass is a sustainable and customisable glass writing surface available in single and double sided versions as well as a wall hanging version suitable work wall, freestanding and partition uses.
CERAMX-DIGITAL CERAMIC PRINTED GLASS
CeramX-Digital printed glass can showcase patterns or graphics on glass, providing you with a hardwearing UV-resistant print for a variety of uses, from decorative cladding and signage to full facades.
Gx Glass Design RangeThe Gx Design Range of mix-and-match processes can be combined for use on monolithic or laminated glass products, providing architects and designers with a way to create bespoke glass products.
We take your intended use and design requirements and work collaboratively to ascertain the best processes to create your specification.
• Glass - low iron, standard, tinted, mirror
• Printing - images, graphics
• Painting - gloss, metallic, mirror and sparkle effects
• Interlayers - metal mesh, fabric, films, mirrors, cracked ice and printing
• Processing - sandblasting, shaping, toughening
• Artwork - commissioning and development to your brief
DECORATIVE LAMINATES
We can laminate mesh, fabric and printed interlayers to your specification and offer cracked ice in a variety of tinted and mirror finishes.
MIRRORS
Gx Glass stocks a range of standard, tinted and antique mirrors.
GLASS STOCK
In 4mm-19mm thicknesses (where available).• Float • Low iron• Antique and tinted mirrors • Satin finish • Tinted and specialist finish glass
SPECIALIST GLASS PRODUCTS
Gx Glass produces a number of specialist products for the interiors market including TV mirrors, anti-reflective panels and toughened mirrors.
CLEARSHIELD ECO-SYSTEMTM
ClearShield by Ritec is a coating system that provides protection against staining, discolouration and adhesion, as well as growth of micro-organisms. It also reduces energy requirements for routine glass washing - saving time, effort and money.
About Gx Glass Services
ColourX Product Information 01233 642 220 [email protected] www.gxglass.com
9
Environmentalinformation
Contact
Gx Glass recognises the importance of meeting client requirements regarding product quality and the possible impact on the environment.
Our ColourX paints are water-based with very low VOC levels and are also extensively tested for adhesion and longevity. ColourX and CeramX-Digital are both inert once cured to the glass, so there are no hazards to the environment when it is recycled. Our metal backing for the MagnX range is also fully recyclable at the end of its life.
Our pallets and wooden stillages are made from sustainably sourced wood and can be returned to us for re-use.
Head OfficeUnits 1 & 2, Brunswick RoadCobbs Wood Industrial EstateAshfordKentTN23 1EL
T. 01233 642 220
W. www.gxglass.com
In-houseprocessing
Safety and standards
• Cutting
• Edging
• Polishing
• Bevelling
• Shaping
• Cut-outs
• Notches
• CNC
All Gx Glass products conform to:
• BSEN 12600 and required international safety glass standards (where applicable)
• BSEN 12150 and required international safety glass standards (where applicable)
• Can also be combined with acoustic interlayers to specification
• Cladding
• Furniture
• Balustrades
• Doors
• Signage
• Reception desks
• Feature walls
Glass applications
• Waterjet
• Toughening / tempering
• Ceramic printing
• Painting
• Sandblasting
• UV bonding
• Partitions
• Screens
• Displays
• Counters
• Façades
ColourX Product Information 01233 642 220 [email protected] www.gxglass.com