EverMill
Indexable Endmills
Shell Mills
LAMINA Multi-Mat® Inserts
One grade cuts Steels, Stainless Steels
& Super Alloys - exceptional performance
in 1018, H-13, 303, 304, 316, 17-4, Inconel 718,
& Titantium
Made in Switzerland
Free CutterPromo !
Missouri Carbide Inc.13965 Lawrence 2143, Mt. Vernon, MO 65712Sales : 800-430-3101 Fax: 417-471-1037www.missouricarbide.com email: [email protected]
Missouri Carbide Inc. Announces its
36th ANNIVERSARY! Come help us celebrate with these
SUPER HOT Anniversary Specials!
Lamina Technologies of Switzerland pioneered the Multi-Mat® (one grade for Multiple Materials/applications), concept in the early 2000’s. Since then it has proven a huge success in Europe and now in the USA.
PROBLEM :
The basis of the concept is simple enough - most machinists agree that a large inventory of several different grades and geometries of inserts is time consuming to work with - from the standpoint of ordering and usage. This time is better spent making chips.
Lamina Multi-Mat® inserts feature tightly bound sub-micron carbide structure with a special PVD TiAlN coating. The secret to performance is consistency and tightly managed quality control.
Lamina Technologies offers two milling grades - both with PHENOMENAL performance - LT 30 - for Cast Irons, Steels, Stainless and Super (High Temp) AlloysLT 05 - for Aluminum
Reduce down time of machine due to setup and tool change, while changing work piece material and application (Semi-roughing to Super-finishing or Roughing to Finishing).
Lamina’s Solution : Use one Multi-Mat® grade of insert for most materials and Optimize cutting conditions to suit the insert and application, in order to achieve higher chip removal rates (combination of Cutting Speed (Vc),Feed Rate (f), Depth of Cut (ap)).
On all materials, Lamina inserts will be at least as good as the dedicated insert from the competition.
Top SWISS quality, performance and consistency.
EverMill
Indexable Endmills
Shell MillsEVERMILL® cutters have been optimally designed to perform with INDUSTRY standard milling inserts (APKT/APLX 10mm & APKT/APLX 16mm rectangular inserts, RDMT - round inserts, and SDKT square inserts).
The concept behind the EVERMILL® line of cutters was to provide shops with a HIGH quality cutter without locking the user into a proprietary insert geometry - all at extremely affordable prices.
EVERMILL® cutters are available in straight shank (endmill) style and arbor hole (shellmill/facemill) style.
Endmill style cutters are available in 90° style.
Shellmills are available in 90° square shoulder cutters, 45° style and round insert style.
Climb milling is recommended wherever possible.
Pocketing is possible by ramping at 1° to 1.5° degrees.
While facemilling it is recommended to engage 2/3 of the cutter diameter.
Free MillingCutter !
with purchase of LAMINA inserts
Multi-Mat
Inserts
POWER THROUGH STAINLESS, INCONEL & TITANIUM !
Missouri Carbide Inc.13965 Lawrence 2143, Mt. Vernon, MO 65712Sales : 800-430-3101 Fax: 417-471-1037www.missouricarbide.com email: [email protected]
EverMill
90° Square Shoulder Shell Mills using APLX1003 series or APGT1003Alu Inserts(see inserts table above)
For Slotting, Side(shoulder) milling, ramping
For Facemilling, Slotting, Side milling
Buy 20 inserts
(mix and match
minimum 10pcs of 1 item#)
and get ANY
1 ENDMILL or
SHELLMILL (on this page)
!FREE
90° Square Shoulder End Mills using APLX1003 series or APGT1003Alu Inserts(see inserts table above)
Free MillingCutter !
with purchase of LAMINA inserts
D -
Endmill
Diameter
d - Shank
Diameter
L - Overall
Length
H - Flute
Length
z - # of
flutes Ap Insert Screws
Torx
Wrench ENDMILL item # Price Each
0.500 0.625 3.250 1.000 1 0.354 M-SC-AP10-1 T-8 M-EAP10N-5062S1 93.00$
0.625 0.625 3.250 1.000 2 0.354 M-SC-AP10-1 T-8 M-EAP10N-6262S2 93.00$
0.625 0.625 6.000 1.000 2 0.354 M-SC-AP10-2 T-8 M-EAP10N-6262L2 103.00$
0.750 0.750 3.500 1.250 3 0.354 M-SC-AP10-2 T-8 M-EAP10N-7575S3 105.00$
0.750 0.750 8.000 1.250 3 0.354 M-SC-AP10-2 T-8 M-EAP10N-7575L3 115.00$
1.000 1.000 3.500 1.250 4 0.354 M-SC-AP10-2 T-8 M-EAP10N-1010S4 112.00$
1.000 1.000 8.000 1.250 4 0.354 M-SC-AP10-2 T-8 M-EAP10N-1010L4 122.00$
1.250 1.000 3.750 1.250 5 0.354 M-SC-AP10-2 T-8 M-EAP10N-1210S5 121.00$
1.250 1.000 10.000 1.250 5 0.354 M-SC-AP10-2 T-8 M-EAP10N-1210L5 131.00$
1.500 1.250 4.000 1.250 6 0.354 M-SC-AP10-2 T-8 M-EAP10N-1512S6 121.00$
1.500 1.250 10.000 1.250 6 0.354 M-SC-AP10-2 T-8 M-EAP10N-1512L6 141.00$
FREE with purchaseof 20 inserts
D -
Shellmill
Dia.
d - Arbor
Hole Dia.
a - key
width H
z - # of
flutes Ap Insert Screws
Torx
Wrench SHELLMILL item # Price Each
2.000 0.750 0.3125 1.750 7 0.354 M-SC-AP10-2 T-8 M-SAP10N-2075-7 152.00$
FREE with purchaseof 20 inserts
! E
ER
F
! EERF
INS
ER
TS LAMINA - inserts
Made in
SWITZERLAND -
Item # Application Shape
Clearance
Angle
Cutting
Edge
Length
Thick-
ness Radius
Lead
Angle
Relief
Angle
Price
Each
APLX1003PDTR-LA 0.039
APLX100308TR-LA 0.031
APLX100340TR-LA 0.148
APGT1003ALU-LA Aluminum 0.015
$10.70
each 15° 90°
Steels, Stainless
Steels, Super Alloys
0.1250.37011° Pos
85°
Multi-Mat
Inserts
3
Missouri Carbide Inc.13965 Lawrence 2143, Mt. Vernon, MO 65712Sales : 800-430-3101 Fax: 417-471-1037www.missouricarbide.com email: [email protected]
EverMill
Free MillingCutter !
with purchase of LAMINA inserts
FREE with purchaseof 20 inserts
For Slotting, Side(shoulder) milling, ramping
90° Square Shoulder Shell Mills using APKT1604 / APGT1604ALU series Inserts (see inserts table above)
For Facemilling, Slotting, Side milling
D - Endmill
Diameter
d - Shank
Diameter
L - Overall
Length
H - Flute
Length
z - # of
flutes Ap ENDMILL item #
ENDMILL
Price Each
INSERT QTY
PURCHASE REQD. TO GET
FREE CUTTER
1.000 1.000 3.500 1.250 2 0.590 M-EAP16N-1010S2 $112.00 20 inserts
1.000 1.000 8.000 1.250 2 0.590 M-EAP16N-1010L2 $162.00 30 inserts
1.250 1.000 3.750 1.250 3 0.590 M-EAP16N-1210S3 $121.00 20 inserts
1.250 1.000 10.000 1.250 3 0.590 M-EAP16N-1210L3 $182.00 30 inserts
1.500 1.250 4.000 1.250 4 0.590 M-EAP16N-1512S4 $121.00 20 inserts
1.500 1.250 10.000 1.250 4 0.590 M-EAP16N-1512L4 $192.00 30 inserts
Insert Screws for above Endmills - item # : M-SC-AP16; Torx Wrench T-8
90° Square Shoulder End Mills using APKT1604 / APGT1604ALU series Inserts (see inserts table above)
!E
ER
F
D -
Shellmill
Dia.
d - Arbor
Hole Dia. a - key width H
z - # of
flutes Ap SHELLMILL item #
SHELLMILL
Price Each
INSERT QTY
PURCHASE REQD. TO GET
FREE CUTTER
2.000 0.750 0.3125 1.750 4 0.590 M-SAP16N-2075-4 $152.00 20 inserts
2.000 0.750 0.3125 1.750 5 0.590 M-SAP16N-2075-5 $172.00 20 inserts
2.500 1.000 0.3750 2.000 5 0.590 M-SAP16N-2510-5 $183.00 30 inserts
3.000 1.000 0.3750 2.000 6 0.590 M-SAP16N-3010-6 $270.00 30 inserts
3.000 1.000 0.3750 2.000 7 0.590 M-SAP16N-3010-7 $270.00 30 inserts
4.000 1.250 0.5000 2.000 7 0.590 M-SAP16N-4012-7 $365.00 40 inserts
5.000 1.500 0.6250 2.000 8 0.590 M-SAP16N-5015-8 $472.00 50 inserts
Insert Screws for above Shellmills - item # : M-SC-AP16; Torx Wrench T-8
!E
ER
F
LAMINA - inserts
Made in
SW ITZERLAND -
Item # Application Shape
Clearance
Angle
Cutting
Edge
Length
Thick-
ness Radius
Lead
Angle
Relief
Angle
Price
Each
APKT1604PDTR-LA 0.039
APKT160424ER-LA 0.088
APGT1604ALU-LA Alum inum 0.015
90° 15° $10.70
each0.630 0.1875
Steels ,
Stainles s
Steels , Super
Alloys
85°
11° Pos
Multi-Mat
Inserts
INS
ER
TS
4
Missouri Carbide Inc.13965 Lawrence 2143, Mt. Vernon, MO 65712Sales : 800-430-3101 Fax: 417-471-1037www.missouricarbide.com email: [email protected]
EverMill
LAMINA - inserts
Made in
SWITZERLAND -
Item # Application Shape
Clearance
Angle
Cutting
Edge
Length
Thick-
ness Radius A E
Price
Each
SDKT1204AETN
15° Pos 0.472 0.1875 0.031 flat facet
45° 20°
RDMT120415° Pos 0.472 dia. 0.1875 0.236 - -
$10.70
each
Steels, Stainless
Steels, Super Alloys
Free MillingCutter !
with purchase of LAMINA inserts
For Face milling and Profile(copy) milling
45° Lead High Positive Shell Mills using SDKT1204AETN series Inserts 4 cutting edges(see inserts table above)
For Face milling and Chamfering
Button Insert Shell Mills using RDMT1204 series Inserts (see inserts table above)
D -
Shellmill
Dia.
d - Arbor
Hole Dia. a - key width H
z - # of
flutes Ap SHELLMILL item #
SHELLMILL
Price Each
INSERT QTY
PURCHASE REQD. TO GET
FREE CUTTER
2.000 0.750 0.3125 1.750 4 0.236 M-SSD12F-2075-4 $152.00 20 inserts
2.000 0.750 0.3125 1.750 5 0.236 M-SSD12F-2075-5 $152.00 20 inserts
3.000 1.000 0.3750 2.000 5 0.236 M-SSD12F-3010-5 $270.00 30 inserts
4.000 1.250 0.5000 2.000 6 0.236 M-SSD12F-4012-6 $365.00 40 inserts
5.000 1.500 0.6250 2.000 7 0.236 M-SSD12F-5015-7 $472.00 50 inserts
Insert Screws for above Shellmills - item # : M-SC-AP16; Torx Wrench T-8
D -
Shellmill
Dia.
d - Arbor
Hole Dia. a - key width H
z - # of
flutes Ap SHELLMILL item #
SHELLMILL
Price Each
INSERT QTY
PURCHASE REQD. TO GET
FREE CUTTER
2.000 0.750 0.3125 1.750 4 0.236 M-SRD12-2075-4 $152.00 20 inserts
3.000 1.000 0.3750 2.000 6 0.236 M-SRD12-3010-6 $270.00 30 inserts
4.000 1.250 0.5000 2.000 7 0.236 M-SRD12-4012-7 $365.00 40 inserts
Insert Screws for above Shellmills - item # : M-SC-AP16; Torx Wrench T-8
!E
ER
F
!E
ERF
Multi-Mat
Inserts
INS
ER
TS
5
Missouri Carbide Inc.13965 Lawrence 2143, Mt. Vernon, MO 65712Sales : 800-430-3101 Fax: 417-471-1037www.missouricarbide.com email: [email protected]
EverMill
Solid CarbideEnd Mills !
6
Missouri Carbide Inc.13965 Lawrence 2143, Mt. Vernon, MO 65712Sales : 800-430-3101 Fax: 417-471-1037www.missouricarbide.com email: [email protected]
Missouri Carbide Inc. Announces its
36th ANNIVERSARY! Come help us celebrate with these SUPER HOT
Anniversary Specials!
*Coated Carbide Inserts **Coated Carbide End Mills
(Single end square 2, 3, or 4 flute)
CNMG-431 $3.80 1/32 $6.22 CNMG-432 $3.80 1/16 $5.26 CNMG-433 $3.80 3/32 $4.78 DNMG-431 $4.90 1/8 $4.62 DNMG-432 $4.90 5/32 $9.20 TNMG-432 $4.60 3/16 $8.96 TNMG-433 $4.60 1/4 $10.53 VNMG-331 $3.80 5/16 $14.45 VNMG-332 $3.80 3/8 $16.93 WNMG-432 $4.50 7/16 $24.30 SEAN-42AFTN $4.00 1/2 $27.50 TPG-221 $2.50 5/8 $52.51 TPG-321 $2.70 11/16 $77.44 TPG-322 $2.70 3/4 $70.18 TPG-431 $4.50 7/8 $124.21 TPG-432 $4.50 1” $125.81
*Coated inserts are multi-layer consisting of: TiCN/ TiC/ Al 203/ TIN
** Coated End Mills are now the most advanced in the industry.
It is ALTIN + Solid Lube. Titanium Aluminum Nitride PLUS a solid lubricant.
Boring BarDeals !
with purchase of LAMINA inserts
Multi-Mat
Inserts
7
Missouri Carbide Inc.13965 Lawrence 2143, Mt. Vernon, MO 65712Sales : 800-430-3101 Fax: 417-471-1037www.missouricarbide.com email: [email protected]
EverMill
BORING BAR PART # INSERTS USED
D-
SHANK
DIA
f - MIN
BORE
L -
LENGTH SCREW WRENCH
10 INSERTS +
1 BORING
BAR KIT ORDER #
Solid - No Coolant thru
B-S05K-SCLCR2-M 0.312 0.438 5.000 KIT-BS05SCLCR21
B-S06K-SCLCR2-M 0.375 0.500 5.000 KIT-BS06SCLCR21
B-S08K-SCLCR2-M 0.500 0.630 5.000 KIT-BS08SCLCR21
B-S10Q-SCLCR2-M 0.625 0.810 7.000 KIT-BS10SCLCR21
Coolant thru
B-A05K-SCLCR2-M 0.312 0.438 5.000 KIT-BA05SCLCR21
B-A06K-SCLCR2-M 0.375 0.500 5.000 KIT-BA06SCLCR21
B-A08K-SCLCR2-M 0.500 0.630 5.000 KIT-BA08SCLCR21
B-A10Q-SCLCR2-M 0.625 0.810 7.000 KIT-BA10SCLCR21
BORING BAR PART # INSERTS USED
D-
SHANK
DIA
f - MIN
BORE
L -
LENGTH SCREW WRENCH
10 INSERTS +
1 BORING
BAR KIT ORDER #
Solid - No Coolant thru
B-S08K-SCLCR3-M 0.500 0.630 5.000 KIT-BS08SCLCR31
B-S10Q-SCLCR3-M 0.625 0.810 7.000 KIT-BS10SCLCR31
B-S12Q-SCLCR3-M 0.750 1.000 7.000 KIT-BS12SCLCR31
B-S16Q-SCLCR3-M 1.000 1.280 7.000 KIT-BS16SCLCR31
Coolant thru
B-A08K-SCLCR3-M 0.500 0.630 5.000 KIT-BA08SCLCR31
B-A10Q-SCLCR3-M 0.625 0.810 7.000 KIT-BA10SCLCR31
B-A12Q-SCLCR3-M 0.750 1.000 7.000 KIT-BA12SCLCR31
B-A16Q-SCLCR3-M 1.000 1.280 7.000 KIT-BA16SCLCR31
Steel Shank Boring Bars for LIGHT CUTS ( upto 0.050 d.o.c)
SC-77 TX-215CCMT 32.51
0.016 RADIUS3/8 I.C.
TX-215
SC-76 TX-207CCMT 21.51
0.016 RADIUS1/4 I.C.
$109.00
$109.00
SC-76 TX-207
Steel Shank Boring Bars for HEAVIER CUTS (upto 0.090 d.o.c)
$99.00
$99.00
CCMT 21.510.016 RADIUS
1/4 I.C.
CCMT 32.510.016 RADIUS
3/8 I.C.SC-77
with purchase of LAMINA inserts
Multi-Mat
Inserts
™
Missouri Carbide Inc.13965 Lawrence 2143, Mt. Vernon, MO 65712Sales : 800-430-3101 Fax: 417-471-1037www.missouricarbide.com email: [email protected]
Free MillingCutter !
If you don’t see what you need in this brochure,
PLEASE Fax, Call, or Email for a Quote.
We accept Visa, Mastercard,Discover, and American Express.
Standard terms with credit approval is -3% 10 days/Net 30.
Missouri Carbide, Inc. 13965 Lawrence 2143, Mt. Vernon, MO 65712
Telephone: 1.800.430.3101 • Fax: 417.471.1037
Visit our website @ missouricarbide.com
for more of our products and capabilities
Square Shoulder ShellmillsIndexable Endmills
Carbide InsertsSolid Carbide EndmillsBoring Bars & Inserts
EverMill
Missouri Carbide Inc.13965 Lawrence 2143, Mt. Vernon, MO 65712