COMMERCIAL P R O D U C T S
CATALOG
COMMERCIAL WATER HEATERS STORAGE TANKSEXPANSION TANKS
SCBCA00507 R April 2012 State_Commercial Catalogue.indd 1 4/26/12 9:41 AM
03 Commercial Introduction
04 iCOMM and iCOMM Elite
05-13 Commercial Gas
05 Ultra Force™
06 Force™ 90+
07 Force™ 90
08 Sandblaster® – SBS Light Duty/SBD Flue Damper
09 Sandblaster® – SBD Booster Models
10 Sandblaster® – SBN Series
11 Sandblaster® – Force™ Power Direct-Vent
12 State Titan®
13-14 State Titan® LV
15-23 Commercial Electric
15 Patriot™
16-17 Sandblaster®
18-19 Commercial Electric
20 Statesman™
21-23 Large Volume Commercial Electrics
24-26 Storage Tanks
24-25 Storage Tanks – PVG Series
26-28 Storage Tanks – UGV Series
29 Expansion Tanks
29 Therm-O-Flex™
Visit www.statewaterheaters.com for complete information
SCBCA00507 R April 2012 State_Commercial Catalogue.indd 2 4/26/12 9:41 AM
State Gives YouAllTheCommercialWaterHeaterChoicesYouNeed!
For new construction or replacement applications, State offers you a complete selection of commercial gas and electric water heaters, as well as commercial storage tanks up to 12,500 gallons. The State Sandblaster® was the industry’s first self-cleaning water heater, and the “State of the art” continues to advance with great new products like the new Force 90™ & Force™ 90+ light commercial gas water heaters, with up to 96% thermal efficiency.
The self-cleaning Hydro Cannon™
Self-CleaningSandblaster®Gas
WiththeHydroCannon™self-cleaningcoldwaterinletdevice,Sandblasterdeliversanevenhigherlevelofsediment-fightingeffectiveness.Bykeepingsedimentbuilduptoaminimum,Sandblastermaintainsitsratedenergyefficiencylonger,andholdsenergycostsdown.
Sandblasterisavailablein“SBD”Seriesmodelswithautomaticfluedamper,pluslowNOx“SBN”SeriesInducedDraftmodels.
SEDIMENT BUILDUP
03
As this chart shows, sediment buildup happens fast inside a commercial water heater, where water is heated to as high as 180°F. Sediment makes a water heater less efficient resulting in increased water heating costs, reduced hot water output and a greater likelihood of premature tank failure.
COMMERCIAL INTRODUCTION
300
30
0
60
90
120
150
180
210
0 900 1500 2100 2700 3300 3900
120˚F
140˚F
150˚F
160˚F
170˚F
180˚F
THERMOSTAT SETTING (˚F)
SEDIMENT BUILDU PPER YEAR (lbs.)
GALLONS OF HOT WATER USED PER DA Y
Source: Purdue University Study
Upto96%thermalefficiencymakestheUltraForcethemostefficientStatecommercialwaterheaterever!
UltraForceisdesignedforeaseofinstallation,with0”clearancetocombustibles,top-mountedgasandelectricalconnections,plustheversatilityofstandardpowerventingorpowerdirectventing,whichdrawsallcombustionairfromoutside!
UltraForce™Gasupto96%Efficient
CodesandStandards
AllStatecommercialgaswaterheatersmeetthethermalefficiencyandstandbylossrequirementsoftheU.S.DepartmentofEnergyandcurrenteditionofASHRAE/IESNA90.1.
StatelowNOxcommercialgaswaterheaterscomplywithSCAQMDRule1146.2andotherAirQualityManagementDistrictswithsimilarrequirementsforlowNOxemissions.
SCBCA00507 R April 2012 State_Commercial Catalogue.indd 3 4/26/12 9:41 AM
COMMERCIAL GAS
iCOM
M™
REM
OTE
MON
ITOR
ING
SYST
EMFo
r mor
e in
form
atio
n an
d or
derin
g ca
ll 1.
888.
WAT
ER02
or v
isit
ww
w.st
atec
onne
ct.c
om
MODELNUMBER
ICMS
IMDS
IABS
ITEM
iCOMMCommunicationsModule
iCOMMMulti-DeviceAdapter
iCOMMAlarmBox
DESCRIPTION
MaincommunicationsboardrequiredforanyiCOMMinstallation.
Neededifmorethanonewaterheaterwillbeconnectedtothecontrolmodule.Order1MDAforeachwaterheaterinstalled.
Accessoryalarmboxthatincludesanaudiblealarmandalarmlight.
Note: If using wireless internet an optional wireless adapter is needed to provide wired connection to the communications module. Recommended adapter Linksys WGA600N or equivalent.
• Facility must have “always on” internet (wired or wireless)
• iCOMM compatible water heater
• Annual iCOMM subscription
iCOMM Requirements
• Provides remote monitoring via www.stateconnect.com
• E-mail and text messaging of fault conditions
• Leak detection and notification
• Graphs unit performance and operational history
• BACnet compatibility with building management systems
iCOMM Features
Visit www.statewaterheaters.com for complete information04
iCOM
M™
Elite
RE
MOT
E M
ONIT
ORIN
G SY
STEM
For m
ore
info
rmat
ion
and
orde
ring
call
1.88
8.W
ATER
02 o
r vis
it w
ww.
stat
econ
nect
.com
MODELNUMBERMODELNUMBER
* iCOMM Elite service plan requires a three year service subscription of $300 annually. Installation charges are the customer’s responsibility. The plan must be started within 90 days of the heater installation. Other restrictions apply.
• The State iCOMM Elite service plan provides a site evaluation, remote monitoring actively managed and monitored by State, service dispatch, and extended warranties. This provides peace of mind with no out-of-pocket expense for the first three years, and is available on our most popular gas and electric models. This plan ensures a hassle-free water heater experience.
Sign up for Elite Service in three easy steps.
Elite
1. Confirm your heater(s) eligibility by entering the model and serial number of your heater(s) at www.stateconnect.com; click on compatible products.
2. Purchase and install an iCOMM monitoring system and subscription.
3. Call 1-888-WATER02 to start your hassle-free service plan.
ELITESV120 SUF 60-120(A)
ELITESV150 SUF 100-150(A)
ELITESV199 SUF 100-199(A)
ELITESV250 SUF 100-250(A)
ELITESV300 SUF 130-300(A)
ELITESV400 SUF 130-400(A)
ELITESV500 SUF 130-500(A)
ELITEGLDEL CSB 52(A),82(A),120(A) IFE
ELITEC0520 SSE 5, 10, 20
ELITEC3050 SSE 30, 40, 50
ELITEC6512 SSE 65, 80, 100, 120
iCOMM Elite Remote Monitoring System
SCBCA00507 R April 2012 State_Commercial Catalogue.indd 4 4/26/12 9:41 AM
COMMERCIAL GAS
ULT
RA
FOR
CE™
SUF
Serie
s –
Up to
96%
The
rmal
Effi
cien
cy, S
tand
ard
Pow
er-V
ent o
r Po
wer
Dire
ct-V
ent O
pera
tion,
Sta
te-o
f-th
e-Ar
t Ele
ctro
nic
Cont
rol
APPROX.SHIPPING
WEIGHT(LBS.)80°RISE
173
173
216
216
288
288
360
360
436
436
582
582
720
720
100°RISE
138
138
173
173
230
230
288
288
349
349
466
466
576
576
DIAMETER
27-3/4
27-3/4
27-3/4
27-3/4
27-3/4
27-3/4
27-3/4
27-3/4
33-1/8
33-1/8
33-1/8
33-1/8
33-1/2
33-1/2
460
490
555
595
555
595
555
595
855
855
855
855
855
855
HEIGHT
55-1/2
55-1/2
75-1/2
75-1/2
75-1/2
75-1/2
75-1/2
75-1/2
75-1/2
75-1/2
75-1/2
75-1/2
75-1/2
75-1/2
MODELNUMBER
SUF60120NE
SUF60120NEA
SUF100150NE
SUF100150NEA
SUF100199NE
SUF100199NEA
SUF100250NE*
SUF100250NEA
SUF130300NE
SUF130300NEA
SUF130400NE
SUF130400NEA
SUF130500NE
SUF130500NEA
DIMENSIONSININCHESGAL.CAP.
60
60
100
100
100
100
100
100
130
130
130
130
130
130
BTUINPUTPERHOURNATURAL/PROPANE
120,000
120,000
150,000
150,000
199,900
199,900
250,000
250,000
300,000
300,000
399,900
399,900
499,900
499,900
THERMAL
EFFICIENCY
95%
95%
95%
95%
95%
95%
95%
95%
96%
96%
96%
96%
96%
96%
RECOVERY–GPH@DEGREEFRISE
Electrical characteristics - 120V - 60Hz A.C., 5.0AAdd $40.00 to price for propane models. Change “N” to “P” in model number for propane. “A” in model represents ASME construction.Concentric Vent kit for SUF60-120 through 130-300 – 9006328005 Concentric Vent kit for SUF130-400 and SUF130-500 - 9006144005 Vents using PVC, ABS or CPVC pipe.
• Up to 96% thermal efficiency – our most efficient gas water heater delivers higher output with lower input than larger conventional units
• Advanced LCD control panel, with status and fault indicating display icons, digital temperature and plain English mode display – iCOMM™ Compatible and can be monitored from remote locations. Call 1.888.WATER02 for more information.
• Venting options (up to 50’ with 3” PVC pipe, 120’ with 4” PVC pipe, for 300/400 up to 70’ with 4” pipe) – Conventional power-venting horizontal or vertical – Sealed power direct-vent, horizontal or vertical, draws all combustion air from outside – Concentric vent capable
• Optional concentric vent kit – SUF 60 120 NE(A) - SUF 130 300NE(A) vent kit p/n 9006328005 – SUF 130 400NE(A) and SUF 130 500 NE(A) vent kit p/n 9006144005
• Zero clearance to combustibles on all sides, combustible floor approval
• Combustion air blower, all controls and gas valves located on top of unit for protection against high water
• Installs with 3” or 4” Schedule 40 PVC pipe, depending on model and length of vent runs
• ASME tank construction available on all models
• Low NOx emissions – all models comply with SCAQMD Rule 1146.2 and Air Quality Management Districts with similar requirements for low NOx emissions
• Maximum hydrostatic working pressure: 160 psi
CONCENTRIC VENT
05
SCBCA00507 R April 2012 State_Commercial Catalogue.indd 5 4/26/12 9:41 AM
COMMERCIAL GAS
FOR
CE™
90+
Fo
r Lig
ht-D
uty
Appl
icat
ions
– 9
6% T
herm
al E
ffici
ency
, 50-
Gallo
n/10
0,00
0 BT
U,
Pow
er D
irect
Ven
t Des
ign,
Nat
ural
Gas
& P
ropa
ne A
dvan
ced
Elec
troni
c Co
ntro
l
• Fully submerged helical coil heat exchanger produces up to 96% thermal efficiency
• Advanced electronic control provides large LCD display, precise temperature control & advanced diagnostics – iCOMM™ Compatible and can be monitored from remote locations. Call 1.888.WATER02 for more information.
•
• 100,000 BTU input results in 164-gallon first hour delivery, 116 GPH recovery at 100° F rise
• Power vent capabilities up to 128 equivalent feet, using 2” or 3” PVC pipe
• Concentric vent capable
• Optional concentric vent kit – Vent kit p/n 9006328005
• Side-mounted recirculating taps for “combination” systems
• Top-fired burner system
• Heavy-duty dual anode rods
• Long-lasting PEXAN™ cross-linked polymer dip tube, with diffuser design to help reduce lime and sediment buildup
• CSA Certified and ASME Rated T&P Relief Valve
• Maximum hydrostatic working pressure: 150 psi
40°RISE
291
100°RISE
116
DIAMETER
22 255
HEIGHT
66-3/4
140°RISE
83
Maximum vent distances:Using 2” PVC pipe: 45 equivalent feetUsing 3” PVC pipe: 128 equivalent feet
APPROX.SHIPPING
WEIGHT(LBS.)
MODELNUMBER
SHE50100NE
DIMENSIONSININCHESBTUINPUTPERHOURNATURAL
100,000
1stHOURDELIVERYGALLONS
164
RECOVERY–[email protected].
50
Visit www.statewaterheaters.com for complete information06
SCBCA00507 R April 2012 State_Commercial Catalogue.indd 6 4/26/12 9:41 AM
COMMERCIAL GAS
• Fully submerged helical coil heat exchanger produces 90% thermal efficiency
• 76,000 BTU input results in 123 gallon first hour delivery, 83 GPH recovery
• Power-vent capabilities up to 128 equivalent feet
• Concentric vent capable
• Optional concentric vent kit – Vent kit p/n 9003910105
• Side-mounted recirculating taps for “combination” systems
• Intelli-Vent™ power gas control valve with silicon nitride hot surface ignitor
• Green Choice® gas burner – 33% lower NOx emissions than standard burners
• Heavy-duty dual anode rods
• Long-lasting PEXAN™ cross-linked polymer dip tube, with diffuser design to help reduce lime and sediment buildup
• CSA Certified and ASME Rated T&P Relief Valve
• Maximum hydrostatic working pressure: 150 psi
APPROX.SHIPPINGWEIGHT(LBS.)
40°RISE
206
100°RISE
83
DIAMETER
22 210
HEIGHT
70-5/8
140°RISE
59
MODELNUMBER
SHE5076NE
DIMENSIONSININCHESGAL.CAP.
50
BTUINPUTPERHOURNATURAL
76,000
1stHOURDELIVERYGALLONS@100°FRISE
123
RECOVERY–GPH@DEGREEFRISE
Maximum vent distances:Using 2” PVC pipe: 45 equivalent feetUsing 3” PVC pipe: 128 equivalent feet
FOR
CE™
90
For L
ight
-Dut
y Ap
plic
atio
ns
90%
The
rmal
Effi
cien
cy 5
0-Ga
llon/
76,0
00 B
TU, P
ower
Ven
t Des
ign
Intelli-Vent is a registered trademark of Emerson Electric Company
07
SCBCA00507 R April 2012 State_Commercial Catalogue.indd 7 4/26/12 9:41 AM
COMMERCIAL GAS
SBS series features
• Standing pilot
• CSA Certified and ASME Rated T&P Relief Valve
• Low NOx burner meets SCAQMD Rule 1146.2 and other Air Quality Management Districts with similar requirements for low NOx emissions
• Three-year limited tank warranty
• Maximum hydrostatic working pressure: 160 psi
SBD series features
• Self-cleaning feature – reduces harmful sediment buildup inside tank; SBD series features Hydro Cannon™ design
• Energy-saving automatic flue damper with 360˚ rotation service switch
• Front, top or rear water connection options – self-cleaning Hydro Cannon functions only when front cold water connection is used
• Low-profile design – fits in tight spaces
• Thermostat dual controller reduces thermal stacking inside tank
• On/Off power switch
• Intermittent electronic ignition eliminates pilot
• Multiple anode rods with stainless steel cores for longer life
• Tank inspection port/cleanout
• 80% thermal efficiency – meets the thermal efficiency and standby loss requirements of the U. S. Department of Energy and current edition of ASHRAE/IESNA 90.1
• Three-year limited warranty
• Maximum hydrostatic working pressure: 160 psi
SAN
DB
LAST
ER®
SBS
Serie
s –
Ligh
t Dut
y SB
D Se
ries
– Au
tom
atic
Flu
e Da
mpe
r
GAL.CAP.
65
74
98
71
81
81
81
100
100
100
100
65
100
65
85
100
85
BTUINPUTPERHOURNATURAL
65,000
75,100
75,100
120,000
154,000
180,000
199,000
199,000
199,000
199,000
250,000
251,000
275,000
305,000
365,000
390,000
500,000
1stHOURDELIVERYGALLONS@100°FRISE
106
125
142
166
206
232
241
263
263
263
312
289
337
342
414
458
545
RECOVERY–GPH@DEGREEFRISE
DIMENSIONSININCHESTOTOPOFTHEDRAFTHOOD
APPROX.SHIPPINGWEIGHT(LBS.)
80°RISE
75
91
91
145
187
218
230
241
241
241
303
304
333
370
442
485
606
HEIGHT
65
61-1/8
69-3/4
69-3/4
73
67-1/2
67-1/2
75
75
72
72
75
72
75
79-1/2
75-1/2
82-1/4
DIAMETER
24
26-1/2
26-1/2
27-3/4
27-3/4
27-3/4
27-3/4
27-3/4
27-3/4
30-1/4
30-1/4
27-3/4
27-3/4
27-3/4
27-3/4
30-1/4
27-3/4
ASME
–
–
–
–
–
–
–
–
–
724
724
862
724
862
833
874
856
MODELNUMBER
SBS6565NE
SBS7576NE
SBS10076NE
SBD71120NE
SBD81154NE
SBD81180NE
SBD81199NE
SBD100199NET
SBD100199NE
SBD100199NES*
SBD100250NE*
SBD65251NE*
SBD100275NE*
SBD65305NE*
SBD100365NE*
SBD100390NE
SBD85500NE*†
SBS LIGHT-DUTY MODELS
SBD MODELS, WITH AUTOMATIC FLUE DAMPER
STANDARD
240
271
350
400
470
470
470
603
603
630
630
750
630
750
725
760
820
100°RISE
60
73
73
116
149
175
184
193
193
193
242
243
267
296
354
378
485
*Available with ASME tank construction. To order ASME construction, add “A” to model number (SBD100 199NES A)†Induced draft design, Category I venting
Visit www.statewaterheaters.com for complete information08
SCBCA00507 R April 2012 State_Commercial Catalogue.indd 8 4/26/12 9:41 AM
COMMERCIAL GAS
• State Hydro Cannon™ self-cleaning device
• Induced-draft design
• Rated as Category I appliance
• Multiple anode rods
• Three water connection options
• Intermittent electronic ignition
• CSA Certified and ASME Rated T&P Relief Valve
• Maximum hydrostatic working pressure: 160 psi
• 80% thermal efficiency
• Meets the thermal efficiency and standby loss requirements of the U. S. Department of Energy and current edition of ASHRAE/IESNA 90.1
APPROX.SHIPPINGWEIGHT(POUNDS)
80°RISE
364
485
100°RISE
145
194
DIAMETER
27-3/4
27-3/4
STANDARD
400
400
ASME
440
440
HEIGHT
45
45
MODELNUMBER
SBD30 MODELS
SBD30150NE
SBD30199NE
DIMENSIONSININCHESGAL.CAP.
32
32
BTUINPUTPERHOURNATURAL
150,000
199,000
1stHOURDELIVERYGALLONS@100°FRISE
167
216
RECOVERY–GPH@DEGREEFRISE
Available with ASME tank construction. To order ASME construction,add “A” to model number (SBD30 199 NE A)
SAN
DB
LAST
ER®
SBD3
0 Se
ries
– Bo
oste
rs
09
SCBCA00507 R April 2012 State_Commercial Catalogue.indd 9 4/26/12 9:41 AM
COMMERCIAL GAS
• Hydro Cannon™ self-cleaning feature – reduces harmful sediment buildup inside tank
• Built-in induced-draft blower – no draft hood or barometric damper required
• Low NOx emissions – complies with SCAQMD Rule 1146.2 and other Quality Management Districts with similar requirements for low NOx emissions
• Front, top or rear water connection options
• On/Off power switch
• Intermittent ignition device eliminates standing pilot
• ASME tank construction available on 200,000 through 390,000 BTU models
• Anode rods with stainless steel core
• Tank inspection port
• Maximum hydrostatic working pressure: 160 psi
APPROX.SHIPPINGWEIGHT(LBS.)
80°RISE
144
185
239
218
239
239
300
332
372
439
468
100°RISE
115
148
191
173
191
191
240
264
297
351
374
DIAMETER
27-3/4
27-3/4
27-3/4
27-3/4
27-3/4
27-3/4
27-3/4
27-3/4
27-3/4
27-3/4
27-3/4
STANDARD
520
550
620
550
620
660
660
660
720
830
830
ASME
–
–
–
–
–
710
710
710
770
880
880
HEIGHT
63
68
72
70
67
72
72
72
73
73
73
MODELNUMBER
SBN71120NE
SBN81154NE
SBN95199NE**†
SBN100180NE
SBN100199NE
SBN100200NES*
SBN100250NE*
SBN100275NE*
SBN85310NE*+
SBN85366NE*
SBN85390NE*
DIMENSIONSININCHESGAL.CAP.
71
81
93
100
100
100
100
100
85
85
85
BTUINPUTPERHOURNATURAL
120,000
154,000
199,000
180,000
199,000
200,000
250,000
275,000
310,000
366,000
390,000
1stHOURDELIVERYGALLONS@100°FRISE
166
206
263
245
263
263
312
337
360
415
438
RECOVERY–GPH@DEGREEFRISE
*Available with ASME tank construction. To order ASME construction, add “A” to model number (SBN100 200NES A)**SBN 95 199NE for sale in California only+Meets 82% TE Utility Rebate
SAN
DB
LAST
ER®
SBN
Serie
s –
Low
-NOx
Indu
ced
Draf
t
Visit www.statewaterheaters.com for complete information10
SCBCA00507 R April 2012 State_Commercial Catalogue.indd 10 4/26/12 9:41 AM
COMMERCIAL GAS
• Non-condensing, up to 85% thermal efficiency
• Self-cleaning feature – reduces harmful sediment buildup inside tank
• Power direct vent design draws all combustion make-up air from outside, eliminates negative air pressure problems
• Installs with 3” Schedule 40 PVC pipe
• On/Off power switch
• Intermittent electronic ignition
• Maximum hydrostatic working pressure: 150 psi
APPROX.SHIPPINGWEIGHT(LBS.)
80°RISE
81
100°RISE
64
DIAMETER
26 352
HEIGHT
69-5/8
MODELNUMBER
SDV7570NE
DIMENSIONSININCHESGAL.CAP.
75
BTUINPUTPERHOURNATURAL
70,000
1stHOURDELIVERYGALLONS@100°FRISE
117
RECOVERY–GPH@DEGREEFRISE
To order propane, change “N” to “P” in model number (SDV75 70PE)
SAN
DB
LAST
ER®
FO
RCE
™
Pow
er D
irect
Ven
t
11
SCBCA00507 R April 2012 State_Commercial Catalogue.indd 11 4/26/12 9:41 AM
COMMERCIAL GAS
• First hour deliveries from 193 to 778 gallons
• Recoveries (100° Rise) from 136 to 718 GPH
• UL listed power gas burner with electronic flame monitoring, direct-spark ignition, redundant gas valves
• GPG models are atmospheric vent, also available as horizontal and direct vent GPV models
• First hour deliveries from 253 to 727 gallons
• Recoveries (100° Rise) from 193 to 679 GPH
• UL listed oil burner, for No. 1 and No. 2 commercial-grade fuel oil
• Burner observation port
GPO Series Oil
STAT
E TI
TAN
®
Pow
er B
urne
r, GP
G Se
ries
– Na
tura
l or P
ropa
ne G
as,
GPV
Dire
ct V
ent S
erie
s –
Natu
ral o
r Pro
pane
Gas
APPROX.SHIPPINGWEIGHT(LBS.)
80°RISE
168
168
238
238
324
324
444
444
655
788
897
241
297
382
467
552
848
100°RISE
136
136
193
193
262
262
359
359
523
630
718
193
238
305
373
441
679
WIDTH
27-3/4
27-3/4
27-3/4
27-3/4
27-3/4
27-3/4
27-3/4
27-3/4
29-1/2
29-1/2
29-1/2
27-3/4
27-3/4
27-3/4
27-3/4
27-3/4
27-3/4
DEPTH
38
38
38
38
38
38
38
38
48-1/2
48-1/2
48-1/2
37
37
37
37
37
37
556
658
545
635
547
632
634
731
950
950
950
568
557
557
638
647
739
HEIGHT
85-1/4
85-1/4
85-1/4
85-1/4
85-1/4
85-1/4
85-1/4
85-1/4
80-3/4
80-3/4
80-3/4
74-3/4
74-3/4
74-3/4
74-3/4
74-3/4
79-3/4
MODELNUMBER
GPG Series Natural or Propane Gas*
GPG81140NE
GPG81140NEA†
GPG81199NE
GPG81199NEA†
GPG81270NE
GPG81270NEA†
GPG81370NE
GPG81370NEA†
GPG85540NEA***
GPG85650NEA***
GPG85740NEA***
GPO Series Oil
GPO86199OE
GPO86245OE
GPO84315OE**
GPO75385OE**
GPO75455OE**
GPO69700OE**
DIMENSIONSININCHESGAL.CAP.
81
81
81
81
81
81
81
81
85
85
85
86
86
84
75
75
69
BTUINPUTPERHOURNATURAL
140,000
140,000
199,000
199,000
270,000
270,000
370,000
370,000
540,000
650,000
740,000
199,000
245,000
315,000
385,000
455,000
700,000
1stHOURDELIVERYGALLONS@100°FRISE
193
193
250
250
319
319
416
416
583
690
778
253
298
363
425
493
727
RECOVERY–GPH@DEGREEFRISE
*For propane gas models, change “N” to “P” in model number (GPG 81 140PE)**Available with ASME tank construction. To order, add “A” to model number (GPO 84 3150E A)***Available as “GPV” Direct Vent models. To order, change “GPG” to “GPV” in model number (GPV85 540NEA)† Indicates ASME tank construction
Visit www.statewaterheaters.com for complete information12
SCBCA00507 R April 2012 State_Commercial Catalogue.indd 12 4/26/12 9:41 AM
COMMERCIAL GAS
STAT
E TI
TAN
® L
V La
rge-
Volu
me,
Pow
er B
urne
r, TP
G Se
ries
– Na
tura
l or P
ropa
ne G
as,
TPO
Serie
s –
Oil,
TPD
Serie
s –
Gas/
Oil “
Dual
Fue
l”,TP
X Se
ries
– Lo
w N
Ox N
atur
al G
as • High storage and inputs make State Titan LV a great choice for large hotels, hospitals and other high-demand installations
• Installs in much smaller footprint than comparable-output boiler/storage tank installations, or conventional commercial gas water heaters installed in multiples
• UL listed power gas burner with electronic flame safeguard controls, intermittent electronic ignition, automatic gas valves, diaphragm air switch for proof of blower operation
• First hour deliveries from 256 to 2,904 gallons
• Recoveries (100° Rise) from 136 to 2,424 GPH
• Burner observation port
• Rated as Category I appliances, can be commonly vented with other Category I appliances, using Type “B” metal venting
• Low NOx “TPX” models comply with Texas requirements for low NOx emissions
APPROX.SHIPPING
WEIGHT(LBS.)80°RISE
170
241
359
327
485
654
873
364
727
970
1212
1515
1818
364
727
970
1212
1515
1818
100°RISE
136
193
247
262
387
524
698
291
582
776
970
1212
1455
291
582
776
970
1212
1455
WIDTH
36-1/2
36-1/2
36-1/2
36-1/2
36-1/2
36-1/2
36-1/2
44-3/4
44-3/4
44-3/4
44-3/4
44-3/4
44-3/4
44-3/4
44-3/4
44-3/4
44-3/4
44-3/4
44-3/4
DEPTH
47
47
47
57-1/2
57-1/2
57-1/2
57-1/2
66-1/2
66-1/2
66-1/2
66-1/2
66-1/2
81-1/2
66-1/2
66-1/2
66-1/2
66-1/2
66-1/2
81-1/2
VENT
5
6
6
6
7
8
10
6
8
10
10
12
12
6
8
10
10
12
12
1292
1292
1292
1397
1397
1505
1510
2098
2098
2103
2103
2467
2675
2150
2150
2308
2308
2584
2774
HEIGHT
82-1/4
82-1/4
82-1/4
82-1/4
82-1/4
82-1/4
82-1/4
84-1/2
84-1/2
84-1/2
84-1/2
84-3/4
84-3/4
92
92
92
92
92
92
MODELNUMBER
TPG150140NEA
TPG150199NEA
TPG150255NEA
TPG150270NEA
TPG150400NEA*
TPG150540NEA*
TPG150720NEA*
TPG200300NEA*
TPG200600NEA*
TPG200800NEA*
TPG2001000NEA*
TPG2001250NEA*
TPG2001500NEA*
TPG300300NEA*
TPG300600NEA*
TPG300800NEA*
TPG3001000NEA*
TPG3001250NEA*
TPG3001500NEA*
DIMENSIONSININCHES1stHOURDELIVERYGALLONS@100°FRISE
256
313
367
382
507
644
818
451
742
936
1130
1372
1615
531
822
1016
1210
1452
1695
RECOVERY–GPH@DEGREEFRISE
BTUINPUTPERHOURNATURAL
140,000
199,000
255,000
270,000
400,000
540,000
720,000
300,000
600,000
800,000
1,000,000
1,250,000
1,500,000
300,000
600,000
800,000
1,000,000
1,250,000
1,500,000
GAL.CAP.
150
150
150
150
150
150
150
200
200
200
200
200
200
300
300
300
300
300
300
Additional models continued on next page
13
SCBCA00507 R April 2012 State_Commercial Catalogue.indd 13 4/26/12 9:41 AM
COMMERCIAL GAS
For propane gas, change “NEA” to “PEA” (TPG150 140 PEA)
For oil, change “TPG” to “TPO” and change “NEA” to “OEA” (TPO150 140OEA)
On “TPO” models, add 100 pounds to Approx. Shipping Weight for natural gas/oil dual-fuel, change “TPG” to “TPD” and change “NEA” to “ONEA” (TPD150 140ONEA)
For propane gas/oil dual-fuel, change “TPG” to “TPD” and change “NEA” to “OPEA” (TPD150 140OPEA)
*Indicates availability as “TPX” low NOx natural gas model
Change “TPG” to “TPX” (TPX150 400NEA)
APPROX.SHIPPINGWEIGHT(LBS.)
DIMENSIONSININCHESRECOVERY–GPH@DEGREEFRISE
STATE TITAN® LV Continued from previous page
80°RISE
727
970
1212
1515
1816
2121
2424
2727
3030
873
1212
1515
1816
2121
2424
2727
3030
100°RISE
582
776
970
1212
1455
1697
1939
2182
2424
698
970
1212
455
1697
1939
2182
2424
WIDTH
55
55
55
55
55
55
55
55
55
55
55
55
55
55
55
55
55
DEPTH
76-1/2
76-1/2
76-1/2
76-1/2
91-1/2
91-1/2
91-1/2
91-1/2
91-1/2
76-1/2
76-1/2
76-1/2
91-1/2
91-1/2
91-1/2
91-1/2
91-1/2
VENT
8
10
10
12
12
14
14
16
16
10
10
12
12
14
14
16
16
3207
3212
3212
3212
3402
3528
3669
4277
4419
3667
3667
3667
3837
3837
3837
4477
4619
HEIGHT
89
89
89
89
89
89
96-1/4
108
108
114
114
114
114
114
114
114
114
MODELNUMBER
TPG400600NEA*
TPG400800NEA*
TPG4001000NEA*
TPG4001250NEA*
TPG4001500NEA*
TPG4001750NEA*
TPG4002000NEA*
TPG5002250NEA
TPG5002500NEA
TPG600720NEA*
TPG6001000NEA*
TPG6001250NEA*
TPG6001500NEA*
TPG6001750NEA*
TPG6002000NEA*
TPG6002250NEA
TPG6002500NEA
1stHOURDELIVERYGALLONS@100°FRISE
902
1096
1290
1532
1775
2017
2259
2582
2824
1178
1450
1692
1935
2177
2419
2662
2904
BTUINPUTPERHOURNATURAL
600,000
800,000
1,000,000
1,250,000
1,500,000
1,750,000
2,000,000
2,250,000
2,500,000
720,000
1,000,000
1,250,000
1,500,000
1,750,000
2,000,000
2,250,000
2,500,000
GAL.CAP.
400
400
400
400
400
400
400
500
500
600
600
600
600
600
600
600
600
Visit www.statewaterheaters.com for complete information14
SCBCA00507 R April 2012 State_Commercial Catalogue.indd 14 4/26/12 9:41 AM
COMMERCIAL ELECTRIC
PATR
IOT™
PC
E Se
ries
– Li
ght-
Duty
Ele
ctric
*Indicates double-element modelRecovery based on maximum wattage – single-element or interlocked double Element 240V models
APPROX.SHIPPINGWEIGHT(LBS.)
90°RISE
18
28
28
28
28
28
28
28
28
28
28
28
28
120V
1.5
1.5
1.5
1.5
–
–
–
–
–
–
–
–
–
120V
3
3
3
3
3
3
3
3
3
3
3
3
3
100°RISE
16
25
25
25
25
25
25
25
25
25
25
25
25
208V
–
–
–
–
4.5
4.5
4.5
4.5
4.5
4.5
4.5
4.5
4.5
240V
3.5
6
6
6
6
6
6
6
6
6
6
6
6
DIAMETER
14-1/4
18
18
21-1/4
21-3/4
24
26-1/2
20-1/2
20-1/2
20-1/2
21-1/2
24
29-3/8
35
54
58
73
100
125
166
98
113
131
176
211
326
HEIGHT
15-1/2
18-1/4
26
21-3/4
30-7/8
32-1/4
32-1/4
34-1/2
45-1/8
57-7/8
60-3/4
59-3/8
62-3/8
MODELNUMBER
COMPACT MODELS
PCE61OMSA
PCE101OMSA
PCE171OMSA
PCE201OMSA
LOWBOY MODELS
PCE302OLSA*
PCE402OLSA*
PCE502OLSA*
TALL MODELS
PCE302ORTA*
PCE402ORTA*
PCE522ORTA*
PCE662ORTA*
PCE822ORTA*
PCE1202ORTA*
DIMENSIONSININCHESMAXIMUMELEMENTWATTAGE–kW
RECOVERY–GPH@DEGREEFRISE
STANDARDELEMENTWATTAGE–kW
GAL.CAP.
6
10
15
20
30
40
50
30
40
50
66
80
119
• Ideal for the hot water needs of small to medium demand applications
• For under counter installation, 6 through 50-gallon Compact and Lowboy models offer heights from 15-1/2” to 32-1/4”
• Direct-immersion threaded heating elements
• Interlock or simultaneous wiring on double element models
• 180° surface-mounted thermostats on double element models
• Shipped with standard wattages shown below unless other wattages are specified when ordering. See detailed product specifications for available wattages at different voltages.
15
SCBCA00507 R April 2012 State_Commercial Catalogue.indd 15 4/26/12 9:41 AM
COMMERCIAL ELECTRIC
• Advanced Electronic Control - Plain English text and animated icons displays detailed operational and diagnostic information. Fault or Alert messages appear if an operational issue occurs. Immersion temperature control adjustable through a range of 90°F to 190°F. – iCOMM™ compatible and can be monitored from remote locations. Call 1.888.WATER02 for more information.
• Economy Mode Operation - Control system automatically lowers the Operating Set Point by a programmed value during user-defined time periods. Helps reduce operating costs during unoccupied or off-peak demand periods.
• Linear Sequencing - Banks of heating elements (3 elements per bank) are energized according to adjustable (1 to 20°) differential set points for each bank. First bank on is the last bank off. Helps reduce current surge and provides accurate water temperature control.
• Gold Elements - Ships with the gold plated elements. Patented elements provide long life and superior scaling resistance. Low watt density means lower surface temperature to minimize scale buildup and more surface to heat water. Gold elements carry a one-year warranty against failure due to lime scale buildup.
• Glasslined Tank - Three sizes: 50, 80 and 119-gallon capacity. Tank interior is coated with glass specially developed for water heater use. Tanks rated at 150 psi (1034 kPa) working pressure (ASME 150 psi). Foam insulation reduces costly heat loss, and is vermin proof.
• Fusing - Protects all elements, thermostats, and internal wiring circuits against excess current flow. Meets National Electrical Code requirements that non-ASME tanks must have internal fusing when current draw exceeds 48 amps.
• Standard Voltages - 208, 240 and 480V single-phase and three-phase delta. Convertible from three-phase to single-phase (in field) and vice Versa. 277V single-phase also available.
• Terminal Block - Factory installed. Just bring the service to the heater and connect to block.
• Magnetic Contactors - Heavy duty, UL rated 100,000 cycles
SAN
DB
LAST
ER®
CS
B 52
. 82
and
120
Imm
ersi
on M
ount
The
rmos
tats
119-gallon models are continued on next page
APPROX.SHIPPING
WEIGHT(LBS.)
DIMENSIONSININCHESRECOVERY–GPH@DEGREEFRISE
80°RISE
31
46
61
69
77
92
123
138
154
184
31
46
61
69
77
92
123
138
154
184
208
230
277
100°RISE
25
37
49
55
61
74
98
111
123
148
25
37
49
55
61
74
98
111
123
148
166
184
221
DIAMETER
21-3/4
21-3/4
21-3/4
21-3/4
21-3/4
21-3/4
21-3/4
21-3/4
21-3/4
21-3/4
25-1/2
25-1/2
25-1/2
25-1/2
25-1/2
25-1/2
25-1/2
25-1/2
25-1/2
25-1/2
25-1/2
25-1/2
25-1/2
OVERALLDEPTH
27
27
27
27
27
27
27
27
27
27
31
31
31
31
31
31
31
31
31
31
31
31
31
265
265
265
265
265
265
265
265
265
265
280
280
280
280
280
280
280
280
280
280
280
280
280
HEIGHT
55-3/4
55-3/4
55-3/4
55-3/4
55-3/4
55-3/4
55-3/4
55-3/4
55-3/4
55-3/4
60-1/4
60-1/4
60-1/4
60-1/4
60-1/4
60-1/4
60-1/4
60-1/4
60-1/4
60-1/4
60-1/4
60-1/4
60-1/4
MODELNUMBER
50-GALLON MODELS
CSB526IFE
CSB529IFE
CSB5212IFE
CSB52135IFE
CSB5215IFE
CSB5218IFE
CSB5224IFE
CSB5227IFE
CSB5230IFE
CSB5236IFE
80-GALLON MODELS
CSB826IFE
CSB829IFE
CSB8212IFE
CSB82135IFE
CSB8215IFE
CSB8218IFE
CSB8224IFE
CSB8227IFE
CSB8230IFE
CSB8236IFE
CSB82405IFE
CSB8245IFE
CSB8254IFE
TOTALWATTAGE
6,000
9,000
12,000
13,500
15,000
18,000
24,000
27,000
30,000
36,000
6,000
9,000
12,000
13,500
15,000
18,000
24,000
27,000
30,000
36,000
40,500
45,000
54,000
kWINPUT
6
9
12
13.5
15
18
24
27
30
36
6
9
12
13.5
15
18
24
27
30
36
40.5
45
54
NUMBEROFELEMENTS
3
3
3
3
3
3*
6
6
6
6*
3
3
3
3
3
3*
6
6
6
6*
9
6
6
1stHOURDELIVERYGALLONS@100°RISE
61
73
85
91
97
109
122
146
159
183
61
73
85
91
97
109
122
146
159
183
222
219
256
Visit www.statewaterheaters.com for complete information16
SCBCA00507 R April 2012 State_Commercial Catalogue.indd 16 4/26/12 9:41 AM
COMMERCIAL ELECTRIC
*208 volt models may contain 3 additional elementsTo order ASME tank construction, add “A” to model number (CSB 52 6 IFE A)All models have 1-1/4” NPT inlet and outlet connections
APPROX.SHIPPING
WEIGHT(LBS.)
DIMENSIONSININCHESRECOVERY–GPH@DEGREEFRISE
CSB Series
Continued from previous page
80°RISE
31
46
61
69
77
92
123
138
154
184
208
230
277
100°RISE
25
37
49
55
61
74
98
111
123
148
166
184
221
TANKDIAMETER
29-1/2
29-1/2
29-1/2
29-1/2
29-1/2
29-1/2
29-1/2
29-1/2
29-1/2
29-1/2
29-1/2
29-1/2
29-1/2
DEPTHWITHJUNCTIONBOX
35
35
35
35
35
35
35
35
35
35
35
35
35
390
390
390
390
390
390
390
390
390
390
390
390
390
HEIGHT
62-1/4
62-1/4
62-1/4
62-1/4
62-1/4
62-1/4
62-1/4
62-1/4
62-1/4
62-1/4
62-1/4
62-1/4
62-1/4
MODELNUMBER
119-GALLON MODELS
CSB1206IFE
CSB1209IFE
CSB12012IFE
CSB120135IFE
CSB12015IFE
CSB12018IFE
CSB12024IFE
CSB12027IFE
CSB12030IFE
CSB12036IFE
CSB120405IFE
CSB12045IFE
CSB12054IFE
NUMBEROFELEMENTS
3
3
3
3
3
3*
6
6
6
6*
9
9
9
1stHOURDELIVERYGALLONS@100°RISE
61
73
85
91
97
109
122
146
159
183
222
219
256
kWINPUT
6
9
12
13.5
15
18
24
27
30
36
40.5
45
54
TOTALWATTAGE
6,000
9,000
12,000
13,500
15,000
18,000
24,000
27,000
30,000
36,000
40,500
45,000
54,000
17
SCBCA00507 R April 2012 State_Commercial Catalogue.indd 17 4/26/12 9:41 AM
COMMERCIAL ELECTRIC
• Gold Elements - CSB models ship with the gold plated elements. Patented gold elements provide long life and superior scaling resistance. Low watt density means lower surface temperature to minimize scale buildup and more surface to heat water.
Gold elements carry a one-year warranty against failure dur to lime scale buildup.
• Glasslined Tank - Three sizes: 50, 80 and 119-gallon capacity. Tank interior is coated with glass specially developed for water heater use. Tanks rated at 150 psi (1034 kPa) working pressure (ASME 150 psi). Foam insulation reduces costly heat loss, and is vermin proof.
• Fusing - Protects all elements, thermostats, and internal wiring circuits against excess current flow. Meets National Electrical Code requirements that non-ASME tanks must have internal fusing when current draw exceeds 48 amps.
• Standard Voltages - 208, 240 and 480V single-phase and three-phase delta. Convertible from three-phase to single-phase (in field) and vice Versa. 277V single-phase also available.
• Terminal Block - Factory installed. Just bring the service to the heater and connect to block.
• Controls - One temperature control (adjustable through a range of 120° to 180°F) and manual reset high temperature cut-off per element. Thermostat step control may be achieved by varying settings on individual temperature controls. Located behind hinged control compartment door for quick, easy access.
SAN
DB
LAST
ER®
CS
B 52
. 82
and
120
Surfa
ce M
ount
The
rmos
tats
119-gallon models are continued on next page
APPROX.SHIPPING
WEIGHT(LBS.)
DIMENSIONSININCHESRECOVERY–GPH@DEGREEFRISE
80°RISE
31
46
61
69
77
92
123
138
154
184
31
46
61
69
77
92
123
138
154
184
208
230
277
100°RISE
25
37
49
55
61
74
98
111
123
148
25
37
49
55
61
74
98
111
123
148
166
184
221
DIAMETER
21-3/4
21-3/4
21-3/4
21-3/4
21-3/4
21-3/4
21-3/4
21-3/4
21-3/4
21-3/4
25-1/2
25-1/2
25-1/2
25-1/2
25-1/2
25-1/2
25-1/2
25-1/2
25-1/2
25-1/2
25-1/2
25-1/2
25-1/2
OVERALLDEPTH
27
27
27
27
27
27
27
27
27
27
31
31
31
31
31
31
31
31
31
31
31
31
31
265
265
265
265
265
265
265
265
265
265
280
280
280
280
280
280
280
280
280
280
280
280
280
HEIGHT
55-3/4
55-3/4
55-3/4
55-3/4
55-3/4
55-3/4
55-3/4
55-3/4
55-3/4
55-3/4
60-1/4
60-1/4
60-1/4
60-1/4
60-1/4
60-1/4
60-1/4
60-1/4
60-1/4
60-1/4
60-1/4
60-1/4
60-1/4
MODELNUMBER
50-GALLON MODELS
CSB526SFE
CSB529SFE
CSB5212SFE
CSB52135SFE
CSB5215SFE
CSB5218SFE
CSB5224SFE
CSB5227SFE
CSB5230SFE
CSB5236SFE
80-GALLON MODELS
CSB826SFE
CSB829SFE
CSB8212SFE
CSB82135SFE
CSB8215SFE
CSB8218SFE
CSB8224SFE
CSB8227SFE
CSB8230SFE
CSB8236SFE
CSB82405SFE
CSB8245SFE
CSB8254SFE
TOTALWATTAGE
6,000
9,000
12,000
13,500
15,000
18,000
24,000
27,000
30,000
36,000
6,000
9,000
12,000
13,500
15,000
18,000
24,000
27,000
30,000
36,000
40,500
45,000
54,000
kWINPUT
6
9
12
13.5
15
18
24
27
30
36
6
9
12
13.5
15
18
24
27
30
36
40.5
45
54
NUMBEROFELEMENTS
3
3
3
3
3
3*
6
6
6
6*
3
3
3
3
3
3*
6
6
6
6*
9
6
6
1stHOURDELIVERYGALLONS@100°RISE
61
73
85
91
97
109
122
146
159
183
61
73
85
91
97
109
122
146
159
183
222
219
256
Visit www.statewaterheaters.com for complete information18
SCBCA00507 R April 2012 State_Commercial Catalogue.indd 18 4/26/12 9:41 AM
COMMERCIAL ELECTRIC
*208 volt models may contain 3 additional elementsTo order ASME tank construction, add “A” to model number (CSB 52 6 IFE A)All models have 1-1/4” NPT inlet and outlet connections
APPROX.SHIPPING
WEIGHT(LBS.)
DIMENSIONSININCHESRECOVERY–GPH@DEGREEFRISE
CSB Series
Continued from previous page
80°RISE
31
46
61
69
77
92
123
138
154
184
208
230
277
100°RISE
25
37
49
55
61
74
98
111
123
148
166
184
221
TANKDIAMETER
29-1/2
29-1/2
29-1/2
29-1/2
29-1/2
29-1/2
29-1/2
29-1/2
29-1/2
29-1/2
29-1/2
29-1/2
29-1/2
DEPTHWITHJUNCTIONBOX
35
35
35
35
35
35
35
35
35
35
35
35
35
390
390
390
390
390
390
390
390
390
390
390
390
390
HEIGHT
62-1/4
62-1/4
62-1/4
62-1/4
62-1/4
62-1/4
62-1/4
62-1/4
62-1/4
62-1/4
62-1/4
62-1/4
62-1/4
MODELNUMBER
119-GALLON MODELS
CSB1206IFE
CSB1209IFE
CSB12012IFE
CSB120135IFE
CSB12015IFE
CSB12018IFE
CSB12024IFE
CSB12027IFE
CSB12030IFE
CSB12036IFE
CSB120405IFE
CSB12045IFE
CSB12054IFE
NUMBEROFELEMENTS
3
3
3
3
3
3*
6
6
6
6*
9
6
6
1stHOURDELIVERYGALLONS@100°RISE
61
73
85
91
97
109
122
146
159
183
222
219
256
kWINPUT
6
9
12
13.5
15
18
24
27
30
36
40.5
45
54
TOTALWATTAGE
6,000
9,000
12,000
13,500
15,000
18,000
24,000
27,000
30,000
36,000
40,500
45,000
54,000
19
SCBCA00507 R April 2012 State_Commercial Catalogue.indd 19 4/26/12 9:41 AM
COMMERCIAL ELECTRIC
• Glasslined tank
• 150 PSI (5 thru 50 gallons)
• 125 PSI (65 thru 120 gallons)
• Anodic protection
• Terminal block on units with more than one (1)
• Advanced Electronic Control– iCOMM™ Compatible and can be monitored from remote locations. Call 1.888.WATER02 for more information.
• Low water cutoff
• Jacket with baked enamel finish
• Incoloy sheath immersion elements with prewired terminal leads
• Magnetic contactor
• 120 volt fused control circuit
• R-16 foam insulation
• Drain Valve and individual element fusing when current draw exceeds 120 amperes
• CSA Certified and ASME Rated T&P Relief Valve
• All models meet the standby loss requirements of the U. S. Department of Energy and Current Edition of ASHRAE/IESNA 90.1
STAT
ESM
AN™
SS
E Se
ries
– Pr
emiu
m H
eavy
-Dut
y El
ectri
c
APPROX.SHIPPINGWEIGHT(LBS.)
DIMENSIONSININCHES
82
116
146
162
206
236
294
310
354
420
MODELNUMBER
SSE-5
SSE-10
SSE-20
SSE-30
SSE-40
SSE-50
SSE-65
SSE-80
SSE-100
SSE-120
DIAMETER
16-1/4
18-3/4
20-1/2
20-1/2
20-1/2
20-1/2
26-1/2
28
28
30
OVERALLDEPTH
22-1/2
25
26-1/2
26-1/2
26-1/2
26-1/2
33-1/2
35
35
37
HEIGHT
20-1/4
26-1/8
27
38
45-1/2
54-1/2
53-1/2
52-1/4
61
65
GAL.CAP.
5
10
20
30
40
50
65
80
100
120
MAX.kWINPUT
3
6
18
24
36
90
90
90
90
90
*Available on 5-gallon models or larger
RECOVERY–GPH@DEGREEFRISE
RECOVERIES AT AVAILABLE kW INPUTS
100°RISE
12
25
37
49
61
74
98
123
148
184
221
246
307
369
140°RISE
9
18
26
35
44
53
70
88
105
132
158
176
219
263
80°RISE
15
31
46
61
77
92
123
154
184
230
277
307
384
461
AVAILABLEkWINPUTS
]
3
6
9
12
15
18
24
30
36
45
54
60*
75*
90*
Visit www.statewaterheaters.com for complete information20
SCBCA00507 R April 2012 State_Commercial Catalogue.indd 20 4/26/12 9:41 AM
COMMERCIAL ELECTRIC
LAR
GE
VOLU
ME
COM
MER
CIAL
EL
ECTR
ICS
SEH
Serie
s
• Available in gallon sizes from 150 to 10,000
• Available in power input from 15 kW to 3,000 kW
SEH 200 THRU 10,000
ADVANCED ELECTRONIC CONTROL – State’s new propriety electronic water heater control, provides precise + or - 1ºF temperature control, that is ideal for industrial and food service applications where exact temperatures of hot water are needed.
• PLAIN TEXT – Animated icons display detailed operational and diagnostic information. Fault or Alert messages appear if an operational issue occurs.
• LOW WATER CUT OFF – Factory standard on board low water cut-off uses a remote electronic immersion type probe to prevent energizing of the elements in the event of low water condition and eliminates accidental dry firing.
• PROGRESSIVE MODULATING – Sizes the input of available elements to match current load conditions. Rotates and lead lags element loads to provide long life and equal wear.
• ECONOMY MODE OPERATION – Control system automatically lowers the operating set point by a programmed value during user defined time periods. Seven-day clock may be programmed for night set back and or weekend shutdown to reduce operating cost and save money.
• iCOMM™ COMPATIBLE - Units can be monitored from remote locations. Call 1.888.WATER02 for more information. Note: Units over 150kW use analog controls.
SOLID STATE MODULATING STEP CONTROL (All Models 180kW and up) – Solid state electronic control device that modulates input to match load through progressive sequencing of steps (up to 20 steps with maximum of one per contactor).
INCOLOY IMMERSION HEATERS – Heavy-duty medium watt density elements (three/immersion heater) have incoloy sheathing: provide excellent protection against oxidation and scaling. The input ranges from 15kW to 3000kW (see accompanying chart).
GLASSLINED TANK – Tank interior is coated with glass specially developed for use in water heaters. Tanks rated at 125 psi working pressure; 150 psi or 160 psi working pressure is optional. Vermin proof fiber glass insulation reduces costly heat loss. Constructed to Section IV of ASME code, and UL standards. Tanks have channel skid base. A 4” x 6” handhole is furnished on 500, 600 and 700-gallon models; 11” x 15” manhole is furnished on 800-gallon and larger sizes.
FUSING – Control and power circuit fusing to meet N.E.C.
COMPLIANCE – Meets the standby loss requirements of the U.S. Department of Energy and current edition of ASHRAE/IESNA 90.1.
MAGNETIC CONTACTOR(S) – Heavy duty UL rated for 100,000 cycles.
21
SCBCA00507 R April 2012 State_Commercial Catalogue.indd 21 4/26/12 9:41 AM
COMMERCIAL ELECTRIC
ADVANCED ELECTRONIC CONTROL – State’s new propriety electronic water heater control, provides precise + or - 1ºF temperature control, that is ideal for industrial and food service applications where exact temperatures of hot water are needed.
• PLAIN TEXT – Animated icons display detailed operational and diagnostic information. Fault or Alert messages appear if an operational issue occurs.
• LOW WATER CUTOFF – Factory standard on board low water cut-off uses a remote electronic immersion type probe to prevent energizing of the elements in the event of low water condition and eliminates accidental dry firing.
• PROGRESSIVE MODULATING – Sizes the input of available elements to match current load conditions. Rotates and lead lags element loads to provide long life and equal wear.
• ECONOMY MODE OPERATION – Control system automatically lowers the operating set point by a programmed value during user defined time periods. Seven-day clock may be programmed for night set back and or weekend shutdown to reduce operating cost and save money.
• iCOMM™ COMPATIBLE - Units can be monitored from remote locations. Call 1.888.WATER02 for more information. Note: Units over 150kW use analog controls.
SEV 150 THRU 10,000LA
RG
E VO
LUM
E CO
MM
ERCI
AL
ELEC
TRIC
S SE
V Se
ries
SOLID STATE MODULATING STEP CONTROL (All Models 180kW and up) – Solid state electronic control device that modulates input to match load through progressive sequencing of steps (up to 20 steps with maximum of one per contactor).
INCOLOY IMMERSION HEATERS – Heavy-duty medium watt density elements (three/immersion heater) have incoloy sheathing: provide excellent protection against oxidation and scaling. The input ranges from 15kW to 3000kW (see accompanying chart).
GLASSLINED TANK – Tank interior is coated with glass specially developed for use in water heaters. Tanks rated at 125 psi working pressure; 150 psi or 160 psi working pressure is optional. Vermin proof fiber glass insulation reduces costly heat loss. Constructed to Section IV of ASME code, and UL standards. Tanks have channel skid base. A 4” x 6” handhole is furnished on 500, 600 and 700-gallon models; 11” x 15” manhole is furnished on 800-gallon and larger sizes.
FUSING – Control and power circuit fusing to meet N.E.C.
COMPLIANCE – Meets the standby loss requirements of the U.S. Department of Energy and current edition of ASHRAE/IESNA 90.1.
MAGNETIC CONTACTOR(S) – Heavy duty UL rated for 100,000 cycles.
Visit www.statewaterheaters.com for complete information22
SCBCA00507 R April 2012 State_Commercial Catalogue.indd 22 4/26/12 9:41 AM
COMMERCIAL ELECTRIC
STATEMODEL*
ALL DIMENSIONS IN INCHES
NOMINALGALLONCAPACITY
MAXIMUMkWINPUT
HEIGHT WIDTH(LENGTH)
DEPTH INLETOUTLETOPENING
DRAINOPENING
RELIEFVALVEOPENING**
*Complete Model Number includes the desired kW at end, e.g.: DVE-500-120 when kW = 120**Size may vary according to kW inputMinimum installation clearances required: 30” from front, 12” from top, and 24” from right side
180
240
300
330
390
480
600
690
780
990
1200
1500
1980
3000
3000
3000
3000
150
150
180
240
300
330
390
480
600
690
780
990
1200
1500
1980
3000
3000
3000
3000
77
91
81
93
100
94
109
121
111
111
138
150
177
211
296
317
345
30
36
36
36
42
42
42
48
48
48
54
60
60
60
66
72
78
90
102
36
36
42
42
42
48
48
48
54
60
60
60
66
72
78
90
102
37
43
43
43
49
49
49
55
55
55
61
67
67
67
73
79
85
97
109
3/4
3/4
3/4
3/4
3/4
1-1/4
1-1/4
1-1/4
1-1/2
1-1/2
1-1/2
1-1/2
2
2
2
2
2
3/4
3/4
3/4
3/4
3/4
3/4
3/4
1-1/4
1-1/4
1-1/4
1-1/2
1-1/2
1-1/2
1-1/2
2
2
2
2
2
3/4
1
1
1
1
1
1
1
1
1
1
1
1-1/4
1-1/2
1-1/2
1-1/2
1-1/2
3/4
3/4
3/4
1
1
1
1
1
1
1
1
1
1
1
1
1-1/2
1-1/2
1-1/2
1-1/2
1-1/2
1-1/2
2
2
2
2
2
2
2
3
3
3
3
3
3
4
4
1-1/4
1-1/4
1-1/2
1-1/2
2
2
2
2
2
2
2
3
3
3
3
3
3
4
4
INSPECTIONOPENING
HORIZONTAL ELECTIC STORAGE HEATER
SEH-200
SEH-250
SEH-300
SEH-350
SEH-400
SEH-500
SEH-600
SEH-700
SEH-800
SEH-1000
SEH-1250
SEH-1500
SEH-2000
SEH-3000
SEH-5000
SEH-7500
SEH-10,000
VERTICAL ELECTRIC STORAGE HEATER
SEV-150
SEV-150L
SEV-200
SEV-250
SEV-300
SEV-350
SEV-400
SEV-500
SEV-600
SEV-700
SEV-800
SEV-1000
SEV-1250
SEV-1500
SEV-2000
SEV-3000
SEV-5000
SEV-7500
SEV-10,000
200
250
300
350
400
500
600
700
800
1000
1250
1500
2000
3000
5000
7500
10,000
150
150
200
250
300
350
400
500
600
700
800
1000
1200
1500
2000
3000
5000
7500
10,000
38-1/2
38-1/2
44-1/2
44-1/2
44-1/2
51
51
51
57
61
61
61
70
76
82
94
106
83-1/2
59-1/2
79-1/2
93
83-1/2
95-1/2
102-1/2
97
112
124
116
116
143
155
183
217
309
330
358
Optional
4” X 6” Handhole
11” X15”Manhole
Optional
11” 15” Manhole
4” X 6” Handhole
23
SCBCA00507 R April 2012 State_Commercial Catalogue.indd 23 4/26/12 9:41 AM
STORAGE TANKS
State offers a complete selection of storage tanks for commercial
applications. Bare uninsulated tanks, jacketed and insulated tanks, vertical
tanks, horizontal tanks, ASME tanks, and custom tanks that can be built to
your specifications...
State now has them all!Capacities range from 80 to 12,500 gallons, and every State storage tank is
covered by a five-year warranty.
• 80, 119 and 175-gallon capacities
• Glasslined tank
• Thick foam insulation
• Anode rod protects against corrosion
• Handhole cleanout on selected models
• ASME tank construction on selected models
• 5-year warranty
STOR
AGE
TANK
S PV
G Se
ries
– Ve
rtica
l Jac
kete
d &
Insu
late
d Ta
nks
*Equipped with handhole cleanout
DIMENSIONSININCHES APPROX.SHIPPINGWEIGHT(LBS.)
236
369
320
320
411
411
560
560
HEIGHT
63
54-7/8
62
62
61-3/4
61-3/4
77
77
DIAMETER
25-1/4
26-1/2
29-3/8
29-3/8
28
28
32
32
MODELNUMBER
PVG00800OVT
PVG00800OVTA
PVG01200OVT
PVG01200OVT2.5
PVG01200OVTA
PVG01200OVTA2.5
PVG02000OVSA*
PVG02000OVSA2.5*
GAL.CAP.
80
80
119
119
119
119
175
175
STANDARDWORKINGPRESSURE
150
160
150
150
160
160
160
160
ASME
NO
YES
NO
NO
YES
YES
YES
YES
Visit www.statewaterheaters.com for complete information24
SCBCA00507 R April 2012 State_Commercial Catalogue.indd 24 4/26/12 9:41 AM
STORAGE TANKS
• 80 through 1,000 gallon capacities
• Glasslined steel tank standard – cement and epoxy linings available
• Thick foam insulation
• Anode rod protects against corrosion
• ASME tank construction standard
• 5-year warranty
PVG SeriesLarge-VolumeJacketed&InsulatedTanks
STOR
AGE
TANK
S
VERTICAL STORAGE TANKS
APPROX.SHIPPINGWEIGHT(LBS.)
DIMENSIONSININCHES
HORIZONTAL STORAGE TANKS
MODELNUMBER
PVG02000OHTA125
PVG02500OHTA125
PVG03500OHTA125
PVG04000OHTA125
PVG05000OHTA125
PVG05000OHSA125
PVG07500OHTA125
PVG10000OHTA125
790
1000
1370
1476
1448
1540
2575
3260
HEIGHT
41
41
47
47
53
59
59
59
WIDTH
77
90
93
99
94
79
111
143
DEPTH
36
41
42
42
48
54
54
54
GALLONCAPACITY
200
250
350
400
500
500
750
1000
APPROX.SHIPPINGWEIGHT(LBS.)
DIMENSIONSININCHES
369
411
516
612
560
900
1080
1282
1369
1526
2395
3320
HEIGHT
54-7/8
61-3/4
87
83
77
96
99
105
100
84
116
148
DIAMETER
26-1/2
28
30
36
32
36
42
42
48
54
54
54
MODELNUMBER
PVG00800OVTA125
PVG01200OVTA125
PVG01400OVTA125
PVG02000OVTA125
PVG02000OVSA125
PVG02500OVTA125
PVG03500OVTA125
PVG04000OVTA125
PVG05000OVTA125
PVG05000OVSA125
PVG07500OVTA125
PVG10000OVTA125
GALLONCAPACITY
80
120
140
200
175
250
350
400
500
500
750
1000
25
SCBCA00507 R April 2012 State_Commercial Catalogue.indd 25 4/26/12 9:41 AM
STORAGE TANKS
APPROX.SHIPPINGWEIGHT(LBS.)
DIMENSIONSININCHES
STOR
AGE
TANK
• For vertical or horizontal installation – tank saddles available for horizontal installation on 140 through 1,000-gallon models
• 80 through 1,000 gallon capacities
• Glasslined tank
• Anode rod protects against corrosion
• ASME tank construction standard on all models 140 through 1,000 gallon models
• 5-year warranty
UVG SeriesUnjacketedTanks
MODELNUMBER
UVG0080OOVT
UVG0120OOVT
UVG0140OOVTA125
UVG0200OOVT
UVG0200OOVTA125
UVG0250OOVTA125
UVG0350OOVT
UVG0350OOVTA125
UVG0400OOVTA125
UVG0500OOVTA125
UVG0500OOVSA125
UVG0750OOVTA125
UVG1000OOVTA125
170
287
368
421
421
505
695
695
775
865
951
1290
1655
DIA.
20
24
24
30
30
30
36
36
36
42
48
48
48
OVERALLLENGTH
62-1/8
62
76-1/4
72
72
84
87-1/2
87-1/2
97-1/8
88
73
105-7/8
137-3/4
GAL.CAP.
80
120
140
200
200
250
350
350
400
500
500
750
1000
WORKINGPRESSURE
150
150
125
150
125
125
125
125
125
125
125
125
125
ASME
No
No
Yes
No
Yes
Yes
No
Yes
Yes
Yes
Yes
Yes
Yes
Visit www.statewaterheaters.com for complete information26
SCBCA00507 R April 2012 State_Commercial Catalogue.indd 26 4/26/12 9:41 AM
STORAGE TANKS
• 80 through 12,500 gallon capacities
• Glasslined steel tank standard – cement or epoxy linings available
• Thick foam insulation on jacketed models
• Anode rod protects against corrosion
• ASME tank construction standard
• 5-year warranty
Continued on next page
DIMENSIONSININCHES
STOR
AGE
TANK
S UG
V Se
ries
– Cu
stom
Tan
ks
MODELNUMBERUGV2000080VA125
UGV2000100VA125
UGV2400125VA125
UGV2400140VA125
UGV2400175VA125
UGV3000175VA125
UGV3000200VA125
UGV3000250VA125
UGV3000300VA125
UGV3600250VA125
UGV3600300VA125
UGV3600350VA125
UGV3600400VA125
UGV3600500VA125
UGV3600550VA125
UGV4200375VA125
UGV4200450VA125
UGV4200500VA125
UGV4200600VA125
UGV4200700VA125
UGV4200800VA125
UGV4200900VA125
UGV4201000VA125
UGV4800500VA125
UGV4800600VA125
UGV4800700VA125
UGV4800750VA125
UGV4800900VA125
UGV4801000VA125
UGV4801250VA125
UGV4801500VA125
OVERALLLENGTH
60
72
66
75
90
60
71
84
99
60
71
86
93
122
125
67
79
88
103
119
134
150
166
73
81
93
105
117
137
159
190
DIAMETER
20
20
24
24
24
30
30
30
30
36
36
36
36
36
36
42
42
42
42
42
42
42
42
48
48
48
48
48
48
48
48
GALLONCAPACITY
80
100
125
140
175
175
200
250
300
250
300
350
400
500
550
375
450
500
600
700
800
900
1000
500
600
700
750
900
1000
1250
1500
Consult specification sheet or your State sales representative for complete details on Custom Storage Tank availability and options.
27
SCBCA00507 R April 2012 State_Commercial Catalogue.indd 27 4/26/12 9:41 AM
STORAGE TANKS
GALLONCAPACITY
OVERALLLENGTH DIAMETER
MODELNUMBER
UGV4801800VA125
UGV4802000VA125
UGV5400650VA125
UGV5400750VA125
UGV5400900VA125
UGV5401000VA125
UGV5401250VA125
UGV5401500VA125
UGV5401800VA125
UGV5402000VA125
UGV5402250VA125
UGV6000800VA125
UGV6001000VA125
UGV6001250VA125
UGV6001500VA125
UGV6001750VA125
UGV6002000VA125
UGV6002250VA125
UGV6002500VA125
UGV6003000VA125
UGV6601000VA125
UGV6601500VA125
UGV6602000VA125
UGV6602500VA125
UGV6603000VA125
UGV6603500VA125
UGV7202500VA125
UGV7203000VA125
UGV7203500VA125
UGV7204000VA125
UGV7204500VA125
UGV7205000VA125
UGV8404000VA125
UGV8405000VA125
UGV8406000VA125
UGV8408000VA125
UGV9607500VA125
UGV9601000VA125
UGV9612500VA125
220
250
71
81
95
105
129
153
181
200
224
72
88
107
126
146
165
185
204
243
75
107
139
171
203
235
147
174
201
228
254
281
173
212
252
330
244
319
395
48
48
54
54
54
54
54
54
54
54
54
60
60
60
60
60
60
60
60
60
66
66
66
66
66
66
72
72
72
72
72
72
84
84
84
84
84
96
96
DIMENSIONSININCHES
STORAGE TANKS UGV Series – Custom Tanks
Continued from previous page
1800
2000
650
750
900
1000
1250
1500
1800
2000
2250
800
1000
1250
1500
1750
2000
2250
2500
3000
1000
1500
2000
2500
3000
3500
2500
3000
3500
4000
4500
5000
4000
5000
6000
8000
7500
10,000
12,500
28 Visit www.statewaterheaters.com for complete information
SCBCA00507 R April 2012 State_Commercial Catalogue.indd 28 4/26/12 9:41 AM
EXPANSION TANKS
THER
M-O
-FLE
X™
• For use with commercial space heating boilers in closed systems – not for use with potable water heating systems
• Free-standing design
• Field-adjustable 12 psi air charge
• Drawn-steel tank with butyl diaphragm separates air and water
• Maximum temperature 240° F
• 1/2” NPT connections
• 100 psi maximum working pressure
• 1-year tank warranty
Commercial SpaceHeatingExpansionTanks
SHIPPINGWEIGHT(LBS.)
Free-Standing
A B
MODELNUMBER
GALLONCAPACITY
MAX.ACCEPTABLEVOLUME(GALLONS)20PSIG
25
32
45
80
99
15-3/8
15-3/8
20
23-3/8
23-3/8
24-3/4
32-3/4
32-5/8
32-5/8
59
ET-15
ET-20
ET-36
ET-52
ET-86
14.6
20
36
52
86
10.5
13.5
21
33.8
61.2
DIMENSIONSININCHES
29
SCBCA00507 R April 2012 State_Commercial Catalogue.indd 29 4/26/12 9:41 AM
State Water Heaters
500 Tennessee Waltz Parkway, Ashland City, TN 37015800-365-8170
www.statewaterheaters.com
© 2012 State Industries | Printed in U.S.A | Form No. SCBCA00507 | APRIL 2012
SCBCA00507 R April 2012 State_Commercial Catalogue.indd 30 4/26/12 9:41 AM