Performance underPressure
Instrumentation & Controls Co. Ltd.
Instrumentation & Controls Co. Ltd.
Instrumentation & Instrumentation & Instrumentation & Controls Co. Ltd.Controls Co. Ltd.Controls Co. Ltd.
A n I S O 9 0 0 1 - 2 0 1 5 C o m p a n y
Instrumentation & Controls Co. Ltd.Instrumentation & Controls Co. Ltd.Instrumentation & Controls Co. Ltd.Instrumentation & Controls Co. Ltd.Instrumentation & Controls Co. Ltd.Instrumentation & Controls Co. Ltd.Instrumentation & Controls Co. Ltd.Instrumentation & Controls Co. Ltd.Instrumentation & Controls Co. Ltd.
APPROVE
D B
Y
ARAM
CO &
SABIC
MADE IN
SAU
DI ARABIA
A company built on strong cohesive foundation, expanding to meet the challenges of an exciting future.
Blue Black
Instrumentation & Controls Co. Ltd.
CD
H
Fx
E T
GE T
DC
HA
H
A
Fx
G
G
B
Hx
H
A
CD
E T
G
F
INDEX
2-20
21-25
26-28
29-30
31-35
Tube Fittings
E T
A
CDB
H
F
G
E T
G
CD
B
Hx
H
F
Hx
G
H
E T
CD
F
1
1
Blue Black
36
Double Compression
Instrument Pipe Fittings
Needle Valve
Ball Valve
Manifold Valve
Accessories
CD
H
Fx
E T
GE T
DC
HA
H
A
Fx
G
G
B
Hx
H
A
CD
E T
G
F
Design Features
• ‘ICCL’ double ferrule fitting consists of 4 parts for leak proof maintenance free joints. • Back ferrule dampens the tube circuit mechanical vibration through spring like action, also prevent carry
over tightening torque from nut to front ferrule • The front ferrule circumferentially seals the surface between tube and the fitting body. The front edge of the
ferrule is pressed on to the tube so that pressure tight impression is formed. • The nut is silver plated to avoid galling and give low assembly torque. • No Pre-Lubrication needed, also allow repeated make and remake.
2
2
TUBE
BACK FERRULE
FRONT FERRULE NUT BODY
Instrumentation & Controls Co. Ltd.Instrumentation & Controls Co. Ltd.
Design & Function‘ICCL’ double compression (Double ferrule) tube fittings provide a leak proof, torque free joints in all instrumentation & process tubing connections which will withstand high pressure, Impulse, Vacuum, Vibration and temperature. These features eliminate costly, hazardous leaks and provide highest safety and maintenance free tubing joints.
All action in the fittings move axially, i.e. Tube is not twisted during assembly. Since no torque is transmitted from the fittings to the tubing, there is no initial strain, which might weaken the tubing. Each part in the fitting assembly is machined to most exacting dimensional tolerance on CNC machines. Total quality management is practiced throughout the manufacturing process as per ISO standard to achieve best quality joints at all tubing end connections.‘ICCL’ tube fitting assembly consist of four precision machined components namely body, nut, front ferrule and back ferrule. All you need to do is to insert the tube and tighten the nut by 1 ¼ turn from finger tight position. This action forces both front & back ferrule to move forward between nut and body, Back ferrule is driven against the taper rare of the front ferrule and swaged radially inward on the tube & thus holding the tube against vibration and mechanical pull due to pressure. Back ferrule also lift the front ferrule out to form a full faced seal on the taper surface of the body. Front ferrule also moves forward against the taper portion of the fitting body and due to wedging action forces inward, gripping and subsequently sealing the front edge tightly on to the tubing.
Double CompressionTube Fittings
E T
A
CDB
H
F
G
E T
G
CD
B
Hx
H
F
Hx
G
H
E T
CD
F
Other features
• Flareless design. • Available for metric and fractional (imperial or inch size) tubes with choice of NPT/BSPT/BSP/SAE/ISO pipe
threads. • Wide range of sizes and configurations. • Manufactured in wide range of material like Stainless Steel, Steel, Brass, Aluminum, Titanium, Hastalloy,
Monel and other special alloys. • All components of fittings are made of same material • Excellent make and remake life. • Interchangeable with leading international brands. • Suitable with thin or thick walled tubes. • Fittings are tested for high pressure, vacuum, Impulse, Vibration and temperature to ensure safety.
Material specifications and standard Material Bar stock Forgings Designator
SS 316/316L ASTM A 276 ASTM A 182 316 / 316L ASME SA 479 ASME SA 182
SS 321 ASTM A 276-S32100 ASTM A 182-S32100 321
6 Mo / F-44 / SMO254 ASTM A 276-S31254 6 Mo
Alloy 400 (Monel) ASTM B 164 ASTM B 564 ASME SB 164 ASME SB 564 M
Alloy 625 (Inconel) UNS-N06625 ASME B 446 A625
Duplex F-51 ASTM A 276-S31803 F-51
Alloy C276 ASTM B 574 ASTM B 564 H (Hastalloy)
FRACTION METRIC
No step Step
Identification of fractional and metric tube fittingsAs there is marginal difference in nearest metric and fractional sizes of tubes, visually it is difficult to identify fitting tube sizes. Therefore stepped shoulder is provided on both body and nut for metric tube fittings as shown in following illustration.
3
3
ASTM A 276-S31254
UNS-N06625ASME B 564
Alloy 825 (Inconel) UNS-N08825 ASME B 425 A825
UNS-N08825ASME B 425
Alloy 20 ASTM B 473 ASTM B 462 A20
Brass ASTM B16 ASTM B283 B ASTM B 453
ASTM A 276-S31803
Super Duplex F-53 ASTM A 276-S32750 F-53ASTM A 276-S32750
CD
H
Fx
E T
GE T
DC
HA
H
A
Fx
G
G
B
Hx
H
A
CD
E T
G
F
Nomenclature / Part number.Part numbers of 'ICCL’ tube fittings are constructed on basis of type of fittings, tube size and thread size.First alphabets shows the type of fittings MC is male connector, FC is female connector, EM is male elbow, TU is union tee and so on. (refer to our dimensional detail tables)For metric size tubes just 'm' is added in front of tube size i.e. 12mm is shown as m12.For fractional size tubes and pipe thread sizes are designated by the number of sixteenth of as inches. i.e.1/2”tube = 8/16 = 8, 3/8”NPT = 6/16 = 6.
Material specification should be added while ordering, after above part numbers, as per above material specification table.
Assembly instruction
• Ensure that the end of the tube is cut square and any burr removed without causing undue chamfering of the tube end
• Insert the tube in pre assembled fitting assembly; make sure that the tube rests firmly on the shoulder of the body and that the nut is finger tight.
• Now while the body firmly held, mark the nut in finger tightened position and rotate the nut by one and quarter (1 ¼) turn from the marked position. (For smaller size tube fittings, i.e. below 3/16” or 4mm, rotate only 3/4 turn).
• For some hard to reach places pre swaging is recommended. • For reassembly tighten the nut until you feel same resistance, you may take additional 1/8 turn if required
4
4
Blue Black
STEP 1 STEP 2
Instrumentation & Controls Co. Ltd.Instrumentation & Controls Co. Ltd.
STEP 3
MATERIAL Type of Fittings Size Tube OD
(Metric) Size Tube OD (Fractional)
Size Pipe Thread /Tube end
AAA BBB CCC DD EE SS MC 8 6
6MO FC m12 8 Metric Connection Fractional Connection
(Leave Blank if Fractional) (Leave Blank if Metric)
B = Brass U = Union m6 = 6mm 2 = 1/8" 2 = 1/8" C20 = Alloy 20 EU = Union Elbow 90° m8 = 8mm 3 = 3/16" 3 = 3/16" H = C-276 (Hastelloy) UR = Reducing Union m10 = 10mm 4 = 1/4" 4 = 1/4" 6MO = 6MO (S31254) BHU = Bulkhead Union m12 = 12mm 5 = 5/16" 6 = 3/8" M = Monel 400 TU = Tee Union m16 = 16mm 6 = 3/8" 8 = 1/2" SS = SS316 CR = Cross Union m18 = 18mm 8 = 1/2" 12 = 3/4" 625 = Inconel 625 MC = Male Connector m20 = 20mm 10 = 5/8" 16 = 1" 825 = Inconel 825 FC = Female Connector m22 = 22mm 12 = 3/4" 20 = 1.1/4" 321 = SS321 BMC = Bulkhead Male connector m25 = 25mm 14 = 7/8" 24 = 1.1/2" F53 = Super Duplex BFC = Bulkhead Female connector m28 = 28mm 16 = 1" 32 = 2" F51 = Duplex EM = Male Elbow m32=32mm 20 = 1.1/4" EF = Female Elbow m38 = 38mm 24 = 1.1/2"
45EU = Union Elbow 45° m50 = 50mm 32 = 2" TMT = Male Branch Tee
TTM = Male Run Tee TFT = Female Branch Tee
TTF = Female Run Tee M.ADPT = Male Adapter
F.ADPT = Female Adapter ODCAP = Tube Cap
ODPLUG = Tube Plug R = Reducer (Tube adaptor)
PC = Port Connector NUT = Nut
FF = Front Ferrule BF = Back Ferrule
SF = Single Ferrule BHR = Bulkhead Reducer
EUR = Reducing Elbow
PIPE END PRESSURE RATINGS AS PER AEME B31.3Fittings that have both Tube and Pipe ends can have different pressure ratings, both charts are shown below for pressure ratings. Selection of pressure rating for fittings having one side tube end and another side PIPE end should be lower rating i.e tube end rating should be selected. Pipe end Pressure Ratings chart list pressure ratings for Male and Female pipe tthreads will be lower than the Male threads, to have same pressure rating, female thread would require heavier wall thickness and fitting becomes too bulky.
Pressure rating
in psi / bar
NPT/ISO PIPE SIZE Psig
1/4” 8000 3/8” 7800
1/2" 77003/4” 7300 1” 5300 370 4400 300
To determine working pressure Rating in accordance with ASME/ANSI B 31.3 Power piping for SS316 multiply PSI by 0.94. above rating is based on annealedof 75000PSI/5170Bar and allowable stress value of 20000 PSI/1378Bar.
Pipe thread specification:
THREAD TYPE REFERENCE
SPECIFICATION
PIPE END PRESSURE RATINGS AS PER AEME B31.3 that have both Tube and Pipe ends can have different pressure ratings, both charts are shown below for
pressure ratings. Selection of pressure rating for fittings having one side tube end and another side PIPE end should be lower rating i.e tube end rating should be selected.
Pipe end Pressure Ratings chart list pressure ratings for Male and Female pipe threads. Pressure rating for female threads will be lower than the Male threads, to have same pressure rating, female thread would require heavier wall thickness and fitting becomes too bulky.
MALE FEMALE Psig Bar Psig
000 550 6600 4507800 540 5300
1/2" 7700 530 4900 3307300 500 4600 5300 370 4400 300
To determine working pressure Rating in accordance with ASME/ANSI B 31.3 Power piping for SS316 multiply annealed seamless 304 or 316 SS tubing with ultimate tensile strengthstress value of 20000 PSI/1378Bar.
NPT ISOP/BSP ISOT/BSPT
ASME B1.20.1
SAE AS71051
ANSI B2.1
ISO 228/I, BS2779 (BSPP)
DIN-ISO 228/1
JIS B 0202
ISO
BS 21 (
DIN 2999JISB0203 (male thread only)
that have both Tube and Pipe ends can have different pressure ratings, both charts are shown below for pressure ratings. Selection of pressure rating for fittings having one side tube end and another side PIPE end
hreads. Pressure rating for female threads will be lower than the Male threads, to have same pressure rating, female thread would require heavier
FEMALE Bar
6600 450 360
4900 330 320
5300 370 4400 300
To determine working pressure Rating in accordance with ASME/ANSI B 31.3 Power piping for SS316 multiply tensile strength
ISOT/BSPT SAE ISO 7/1
S 21 (BSPT)
DIN 2999
ASME B1.1
(male thread only)
Elevated Temperature Factors:
Temperature Tubing Materials
°F °C 316/316L Alloy-400 Alloy C-276 Alloy-625 Alloy-254
200 93 1.00 0.87 1.00 1.00 0.93 0.90
400 204 0.96 0.79 0.96 0.90 0.85 0.74
600 315 0.85 0.79 0.85 0.84 0.79 0.67
800 426 0.79 0.75 0.79 0.81 0.75
1000 537 0.76 0.76 0.73
To determine allowable working pressure at elevated temperatures, multiply allowable working pressures by above factor.
Alloy-825
Seamless tube wall thickness (SWG/ Inch) A-625 Allowable working pressures are calculated from an UTS value of 26,700 psi (184.1 MPa) for ASTM B444 Grade 2 tubing at –20 to 100°F (–28 to 37°C).High-quality, fully annealed seamless alloy 625 tubing, ASTM B444, Grade 1 or 2, or equivalent. Hardness should not exceed 25 HRC or 266 HV. Tubing should be free of scratches & suitable for bending and flaring.
MaximumWorkingPressure
in psi / bar
Tube 22 20 18 16 14 12OD. 0.028 0.035 0.049 0.064 0.083 0.104
1/4” 7000/490 9000/630 12000/840
3/8” 4600/320 6400/440 9000/6301/2" 3500/245 5000350 6400/450 3/4” 3300/230 4500/315 4900/3401” 2300/160 3200/220 3600/250
Seamless tube wall thickness (SWG/ Inch) Alloy 254 (6Mo) Allowable working pressures are calculated from an UTS value of 27,100 psig (186.8 MPa) for ASTM A213 tubing at -20 to 100°F (–28 to 37°C),High-quality, fully annealed seamless or welded and drawn alloy 254 hydraulic tubing, ASTM A269 or ASTM A213, or equivalent. Hardness should not exceed 96 HRB. Tubing should be free of scratches & suitable for bending and flaring.
MaximumWorkingPressure
in psi / bar
Tube 22 20 18 16 14 12OD. 0.028 0.035 0.049 0.064 0.083 0.104
1/4” 5000/350 6000/430 9000/630 12000/8603/8” 4500/315 6500/450 8000/5601/2" 3500/240 5000/350 6500/450 8000/5603/4” 4500/315 4900/3401” 2300/160 3200/220
NOTE: No allowance is made for corrosion or erosion, for welded tubing multiply above pressure rating by 0.80
Tube End Pressure rating and Tubing Selection:Double and single compression SS tube fittings are rated to the maximum working pressure of the tubing as shown below. Therefore proper selection of tubing must be done while making safe leak free joint. Tube should be fully annealed, high quality stainless steel tubing. The preferred hardness is RB 70 or less. The tubing should be free from scratches, surface defects and suitable for bending.
Following rating is based on annealed seamless 304 or 316 SS tubing with ultimate tensile 20000 Psi and allowable working pressure load of 1378 Bar.
Seamless tube wall thickness (SWG/ Inch) Stainless Steel
Allowable working pressures are calculated from an UTS value of 20,000 psi (137.8 MPa) for ASTM A269 tubing at –20 to 100°F (–28 to 37°C),High-quality, fully annealed (Type 304, 304/304L, 316, 316/316L, 317, 317/317L, 321, 347) seamless stainless steel hydraulic tubing, ASTM A269 and A213, or equivalent. Hardness should not exceed 90 HRB or 200 HV. Tubing should be free of scratches, suitable for bending and flaring. OD tolerances should not exceed ± 0.003” for 1/16” OD tubing.
MaximumWorkingPressure
in psi / bar
Tube 22 20 18 16 14 12OD. 0.028 0.035 0.049 0.064 0.083 0.104
1/8” 8500/590 10900/760
1/4” 4000/280 5000/350 7300/500 10200/700
5/16” 4000/280 5700/400 8000/560
3/8” 3300/230 4600/320 6400/450
1/2" 2500/170 3300/230 4600/320 6200/430
5/8” 2800/200 4000/280 5200/360 6000/420
3/4” 2300/160 3300/230 4100/290 4900/340
7/8” 2000/140 2800/200 3600/250 4200/290
1” 2300/160 3000/210 3600/250
CD
H
Fx
E T
GE T
DC
HA
H
A
Fx
G
G
B
Hx
H
A
CD
E T
G
F
UNION
UNION
UNION ELBOW
Imperial tubing U
UNION ELBOW
Imperial tubing - EU
Note : Sizes & various combinations other than mentioned above are made on request.All Dimension are for reference only and are subject to change.
PART 'T' TUBE A C D E F G H
NO OD ~ ~ ~ A/F A/F Body
EU2 1/8" 0.88 0.60 0.50 0.09 1/2" 7/16" 0.62
EU3 3/16" 1.00 0.63 0.64 0.12 1/2" 1/2" 0.74
EU4 1/4" 1.06 0.70 0.60 0.19 9/16" 9/16" 0.77
EU5 5/16" 1.13 0.73 0.64 0.25 9/16" 5/8" 0.84
EU6 3/8" 1.20 0.76 0.66 0.28 5/8" 11/16" 0.91
EU8 1/2" 1.42 0.86 0.90 0.41 13/16" 7/8" 1.02
EU10 5/8" 1.50 0.86 0.96 0.50 15/16" 1" 1.10
EU12 3/4" 1.57 0.86 0.96 0.62 1-1/16" 1-1/8" 1.17
EU14 7/8" 1.76 0.86 1.02 0.72 1-1/4" 1-1/4" 1.36
EU16 1" 1.93 1.04 1.23 0.88 1-3/8" 1-1/2" 1.45
Metric tubing - EUm
EUm3 3 22.3 15.3 12.9 2.4 11.0 11.0 15.7
EUm6 6 27.0 17.7 15.3 4.8 15.0 14.0 19.6
EUm8 8 28.8 18.6 16.2 6.3 15.0 16.0 21.3
EUm10 10 31.5 19.5 17.2 7.9 17.0 19.0 23.9
EUm12 12 36.0 22.0 23.0 9.5 20.5 22.0 25.9
EUm16 16 38.0 22.0 24.6 12.7 24.0 25.4 28.0
EUm20 20 44.6 22.0 26.1 15.9 32.0 32.0 34.5
EUm25 25 49.0 26.5 31.2 21.8 35.0 38.1 36.8
PART 'T' TUBE A C D E F G H
NO OD ~ ~ ~ MIN A/F A/F Body
U2 1/8" 1.40 0.60 0.50 0.09 7/16" 7/16" 0.88
U3 3/16" 1.47 0.63 0.64 0.12 7/16" 1/2" 0.95
U4 1/4" 1.61 0.70 0.60 0.19 1/2" 9/16" 1.03
U5 5/16" 1.69 0.73 0.64 0.25 9/16" 5/8" 1.11
U6 3/8" 1.77 0.76 0.66 0.28 5/8" 11/16" 1.19
U8 1/2" 2.02 0.86 0.90 0.41 13/16" 7/8" 1.22
U10 5/8" 2.05 0.86 0.96 0.50 15/16" 1" 1.25
U12 3/4" 2.11 0.86 0.96 0.62 1-1/16" 1-1/8" 1.31
U14 7/8" 2.17 0.86 1.02 0.72 1-1/4" 1-1/4" 1.37
U16 1" 2.55 1.04 1.23 0.88 1-3/8" 1-1/2" 1.59
Metric tubing Um
Um3 3 35.3 15.3 12.9 2.4 11.0 11.0 22.2
Um6 6 41.0 17.7 15.3 4.8 14.0 14.0 26.2
Um8 8 43.2 18.6 16.2 6.3 14.0 16.0 28.2
Um10 10 46.2 19.5 17.2 7.9 17.0 19.0 31.0
Um12 12 51.2 22.0 23.0 9.5 20.6 22.0 31.0
Um16 16 52.3 22.0 24.6 12.7 24.0 25.4 31.8
Um20 20 55.0 22.0 26.1 15.9 30.0 32.0 34.8
Um25 25 65.0 26.5 31.2 21.8 35.0 38.0 40.4
CD
A
H
G
F
E T
DC
AHF
E T
G
6
6
Blue Black
Instrumentation & Controls Co. Ltd.Instrumentation & Controls Co. Ltd.
E T
A
CDB
H
F
G
E T
G
CD
B
Hx
H
F
Hx
G
H
E T
CD
F
REDUCING UNION
REDUCING UNION
BULKHEAD UNION BULKHEAD UNION
PART TUBE TUBE A C Cx D Dx E F G GX H
NO. OD OD ~ ~ ~ ~ ~ MIN A/F NUT NUT BODY
T' Tx'
UR42 1/4" 1/8" 1.52 0.70 0.60 0.60 0.50 0.09 1/2" 9/16" 7/16" 0.97
UR54 5/16" 1/4" 1.66 0.73 0.70 0.64 0.60 0.19 9/16" 5/8" 9/16" 1.08
UR64 3/8" 1/4' 1.70 0.76 0.70 0.66 0.60 0.19 5/8" 11/16" 9/16" 1.12
UR84 1/2" 1/4" 1.85 0.86 0.70 0.90 0.60 0.19 13/16" 7/8" 9/16" 1.16
UR86 1/2" 3/8" 1.91 0.86 0.76 0.90 0.66 0.28 13/16" 7/8" 11/16" 1.22
UR106 5/8" 3/8" 1.94 0.86 0.76 0.96 0.66 0.28 15/16'" 1" 11/16" 1.25
UR108 5/8" 1/2" 2.05 0.86 0.86 0.96 0.90 0.41 15/16" 1" 7/8" 1.25
UR126 3/4" 3/8" 2.00 0.86 0.86 0.96 0.66 0.28 1-1/16" 1-1/8" 11/16" 1.31
UR128 3/4" 1/2" 2.11 0.86 0.86 0.96 0.90 0.41 1-1/16" 1-1/8'" 7/8" 1.31
UR1210 3/4" 5/8" 2.11 0.86 0.86 0.96 0.96 0.50 1-1/16" 1-1/8" 15/16" 1.31
UR1612 1" 3/4" 2.38 1.04 0.86 1.23 0.96 0.62 1-3/8" 1-1/2" 1-1/8" 1.50
Metric Tubing- URm
URm63 6 3 38.6 17.7 15.3 15.3 12.9 2.4 14 14 11 24.6
URm86 8 6 42.3 18.6 17.7 16.2 15.3 4.8 14 16 14 27.4
URm106 10 6 44.5 19.5 17.7 17.2 15.3 4.8 17 19 14 29.5
URm108 10 8 45.1 19.5 18.6 17.2 16.2 6.3 17 19 16 30.0
URm126 12 6 47.0 22.0 17.7 23.0 15.3 4.8 20.6 22 14 29.5
URm128 12 8 47.8 22.0 18.6 23.0 16.2 6.3 20.6 22 16 30.2
URm1210 12 10 48.7 22.0 19.5 23.0 17.2 7.9 20.6 22 19 31.0
URm1610 16 10 49.5 22.0 19.5 24.6 17.2 7.9 24 25.4 19 31.8
URm1612 16 12 52.0 22.0 22.0 24.6 23.0 9.5 24 25.4 22 31.8
URm2520 25 20 62.3 26.5 22.0 31.2 26.1 15.9 35 38 32 39.9
Imperial tubing - UR
Imperial tubing BHU
Note : Sizes & various combinations other than mentioned above are made on request.All Dimension are for reference only and are subject to change.
PART TUBE A C D E F G H J K Panel
NO. OD. ~ ~ ~ A/F A/F ~ Hole
T' Size
BHU2 1/8" 2.02 0.60 0.50 0.09 1/2" 7/16" 1.50 1.23 0.97 0.33
BHU3 3/16" 2.11 0.63 0.64 0.12 7/16" 1/2" 1.59 1.26 1.00 0.39
BHU4 1/4" 2.27 0.70 0.60 0.19 5/8" 9/16" 1.69 1.32 1.03 0.45
BHU5 5/16" 2.39 0.73 0.64 0.25 11/16" 5/8" 1.81 1.41 1.12 0.52
BHU6 3/8" 2.45 0.76 0.66 0.28 3/4" 11/16" 1.87 1.45 1.16 0.58
BHU8 1/2" 2.80 0.86 0.90 0.41 15/16" 7/8" 2.00 1.65 1.25 0.77
BHU10 5/8" 2.86 0.86 0.96 0.50 1-1/16" 1" 2.06 1.68 1.28 0.89
BHU12 3/4" 3.11 0.86 0.96 0.62 1-3/16" 1-1/8" 2.31 1.87 1.47 1.02
BHU16 1" 3.77 1.04 1.23 0.88 1-5/8" 1-1/2" 2.81 2.26 1.78 1.33
Metric tubing BHUm
BHUm3 3 51.3 15.3 12.9 2.4 12.7 11.0 38.1 31.2 24.6 8.3
BHUm6 6 57.7 17.7 15.3 4.8 16.0 14.0 42.9 33.6 26.2 11.5
BHUm8 8 61.0 18.6 16.2 6.3 17.4 16.0 46.0 36.1 28.6 13.1
BHUm10 10 63.7 19.5 17.2 7.9 19.0 17.4 48.5 37.0 29.4 16.3
BHUm12 12 71.0 22.0 23.0 9.5 24.0 22.0 50.8 41.9 31.8 19.5
BHUm16 16 72.5 22.0 24.6 12.7 27.0 25.4 52.4 42.6 32.5 22.8
BHUm20 20 84.5 22.0 26.1 15.9 35.0 32.0 64.3 53.0 42.9 29.0
BHUm25 25 95.8 26.5 31.2 21.8 41.0 38.0 71.4 57.4 45.2 33.7
A
H
KJ
FDC
E T
G
CD
HA
DxCx
TxE T
GxF G
7
7
CD
H
Fx
E T
GE T
DC
HA
H
A
Fx
G
G
B
Hx
H
A
CD
E T
G
F
Note : Various custom made manifolds with different types and sizes of end connections are made on request.All Dimension are for reference only and are subject to change.
UNION TEE
UNION TEE
UNION CROSS
UNION CROSS
PART 'T' TUBE A C D E F G H
NO. OD ~ ~ ~ A/F A/F BODY
TU2 1/8" 0.88 0.60 0.50 0.09 1/2" 7/16" 0.62
TU3 3/16" 1.00 0.63 0.64 0.12 1/2" 1/2" 0.70
TU4 1/4" 1.06 0.70 0.60 0.19 9/16" 9/16" 0.77
TU5 5/16" 1.17 0.73 0.64 0.25 9/16" 5/8" 0.88
TU6 3/8" 1.20 0.76 0.66 0.28 5/8" 11/16" 0.91
TU8 1/2" 1.42 0.86 0.90 0.41 13/16" 7/8" 1.02
TU10 5/8" 1.50 0.86 0.96 0.50 15/16" 1" 1.13
TU12 3/4" 1.57 0.86 0.96 0.62 1-1/16" 1-1/8" 1.17
TU14 7/8" 1.76 0.86 1.02 0.72 1-1/4" 1-1/4" 1.36
TU16 1" 1.93 1.04 1.23 0.88 1-3/8" 1-1/2" 1.45
Metric tubing TUm
TUm3 3 22.3 15.3 12.7 2.4 12.7 11.0 15.70
TUm6 6 27.0 17.7 15.3 4.8 12.7 14.0 19.60
TUm8 8 29.7 18.6 16.2 6.3 15.0 16.0 22.20
TUm10 10 31.5 19.5 17.5 7.9 17.0 19.0 23.90
TUm12 12 36.0 22.0 23.0 9.5 22.0 22.0 25.90
TUm16 16 38.0 22.0 24.6 12.7 24.0 25.4 28.70
TUm20 20 44.6 22.0 26.1 15.9 32.0 32.0 34.50
TUm25 25 49.0 26.5 31.2 21.8 35.0 38.0 36.80
PART 'T' TUBE A C D E F G H
NO. OD ~ ~ ~ A/F A/F BODY
CR2 1/8" 0.88 0.60 0.50 0.09 1/2" 7/16" 0.62
CR3 3/16" 1.00 0.63 0.64 0.12 1/2" 1/2" 0.70
CR4 1/4" 1.06 0.70 0.60 0.19 9/16" 9/16" 0.77
CR5 5/16" 1.17 0.73 0.64 0.25 9/16" 5/8" 0.88
CR6 3/8" 1.20 0.76 0.66 0.28 5/8" 11/16" 0.91
CR8 1/2" 1.42 0.86 0.90 0.41 13/16" 7/8" 1.02
CR10 5/8" 1.50 0.86 0.96 0.50 15/16" 1" 1.13
CR12 3/4" 1.57 0.86 0.96 0.62 1-1/16" 1-1/8" 1.17
CR14 7/8" 1.76 0.86 1.02 0.72 1-1/4" 1-1/4" 1.36
CR16 1" 1.93 1.04 1.23 0.88 1-3/8" 1-1/2" 1.45
Metric tubing - CRm
CRm3 3 22.3 15.3 12.7 2.4 12.7 11.0 15.70
CRm6 6 27.0 17.7 15.3 4.8 12.7 14.0 19.60
CRm8 8 29.7 18.6 16.2 6.3 15.0 16.0 22.20
CRm10 10 31.5 19.5 17.5 7.9 17.0 19.0 23.90
CRm12 12 36.0 22.0 23.0 9.5 22.0 22.0 25.90
CRm16 16 38.0 22.0 24.6 12.7 24.0 25.4 28.70
CRm20 20 44.6 22.0 26.1 15.9 32.0 32.0 34.50
CRm25 25 49.0 26.5 31.2 21.8 35.0 38.0 36.80
Imperial tubing TU
Imperial tubing -CR
E T
DC
HA
HA
F
G
G
CD
A
H
F
E T
G
8
8
Blue Black
Instrumentation & Controls Co. Ltd.Instrumentation & Controls Co. Ltd.
E T
A
CDB
H
F
G
E T
G
CD
B
Hx
H
F
Hx
G
H
E T
CD
F
Note : Sizes & various combinations other than mentioned above are made on request.All Dimensions are for refeerence only and subject to change.
MALE CONNECTOR
MALE CONNECTOR Imperial tubing - MC
PART 'T' TUBE N.P.T A B C D E F G H
NO. OD. 'P' ~ ~ ~ ~ MIN A/F A/F BODY
MC22 1/8" 1/8" 1.20 0.38 0.60 0.50 0.09 1/2" 7/16" 0.94
MC24 1/8" 1/4" 1.40 0.56 0.60 0.50 0.09 9/16" 7/16" 1.14
MC32 3/16" 1/8" 1.23 0.38 0.63 0.54 0.12 1/2" 1/2" 0.97
MC34 3/16" 1/4" 1.43 0.56 0.63 0.54 0.12 9/16" 1/2" 1.17
MC42 1/4" 1/8" 1.29 0.38 0.70 0.60 0.19 1/2" 9/16" 1.00
MC44 1/4' 1/4' 1.49 0.56 0.70 0.60 0.19 9/16" 9/16" 1.20
MC46 1/4" 3/8" 1.51 0.56 0.70 0.60 0.19 11/16" 9/16" 1.22
MC48 1/4" 1/2' 1.76 0.75 0.70 0.60 0.19 7/8" 9/16" 1.47
MC54 5/16" 1/4' 1.52 0.56 0.73 0.64 0.25 9/16" 5/8" 1.23
MC62 3/8" 1/8" 1.39 0.38 0.76 0.66 0.19 5/8" 11/16" 1.10
MC64 3/8" 1/4' 1.57 0.56 0.76 0.66 0.28 5/8" 11/16" 1.28
MC66 3/8" 3/8' 1.57 0.56 0.76 0.66 0.28 11/16" 11/16" 1.28
MC68 3/8" 1/2" 1.82 0.75 0.76 0.66 0.28 7/8" 11/16" 1.53
MC84 1/2' 1/4" 1.71 0.56 0.86 0.90 0.28 13/16" 7/8" 1.31
MC86 1/2" 3/8" 1.71 0.56 0.86 0.90 0.38 13/16" 7/8" 1.31
MC88 1/2' 1/2" 1.93 0.75 0.86 0.90 0.41 7/8" 7/8" 1.53
MC812 1/2" 3/4" 1.99 0.75 0.86 0.90 0.41 1-1/16" 7/8" 1.59
MC106 5/8" 3/8" 1.74 0.56 0.86 0.96 0.38 13/16" 1" 1.34
MC108 5/8' 1/2" 1.93 0.75 0.86 0.96 0.47 13/16" 1" 1.53
MC128 3/4' 1/2' 1.99 0.75 0.86 0.96 0.47 1-1/16" 1-1/8" 1.59
MC1212 3/4' 3/4" 1.99 0.75 0.86 0.96 0.62 1-1/16" 1-1/8" 1.59
MC1216 3/4" 1' 2.25 0.94 0.86 0.96 0.62 1-3/8" 1-1/8" 1.85
MC1416 7/8" 3/4' 1.99 0.75 0.86 1.02 0.62 1-1/4" 1-1/4" 1.59
MC1612 1' 3/4' 2.26 0.75 1.04 1.23 0.62 1-3/8" 1-1/2" 1.78
MC1616 1" 1" 2.45 0.94 1.04 1.23 0.88 1-3/8" 1-1/2" 1.97
Metric Tubing - MCm
MCm32 3 1/8' 30.5 9.7 15.3 12.9 2.4 12.7 12.7 23.9
MCm34 3 1/4' 35.6 14.2 15.3 12.9 2.4 14.0 12.7 29.0
MCm62 6 1/8" 32.8 9.7 17.7 15.3 4.8 14.0 14.0 25.4
MCm64 6 1/4' 37.9 14.2 17.7 15.3 4.8 14.0 14.0 30.5
MCm66 6 3/8' 38.4 14.2 17.7 15.3 4.8 17.0 14.0 31.0
MCm68 6 1/2' 44.7 19.0 17.7 15.3 4.8 22.0 14.0 37.3
MCm84 8 1/4' 38.7 14.2 18.6 16.2 6.3 14.0 16.0 31.4
MCm86 8 3/8' 39.2 14.2 18.6 16.2 6.3 17.0 16.0 31.8
MCm88 8 1/2' 45.6 19.0 18.6 16.2 6.3 22.0 16.0 38.1
MCm104 10 1/4' 40.9 14.2 19.5 17.2 7.1 19.0 19.0 33.3
MCm106 10 3/8" 40.9 14.2 19.5 17.2 7.9 19.0 19.0 33.3
MCm108 10 1/2" 46.5 19.0 19.5 17.2 7.9 22.0 19.0 38.9
MCm124 12 1/4' 43.4 14.2 22.0 22.8 7.1 20.5 22.0 33.3
MCm126 12 3/8' 43.4 14.2 22.0 22.8 9.5 20.5 22.0 33.3
MCm128 12 1/2' 49.0 19.0 22.0 22.8 9.5 22.0 22.0 38.9
MCm166 16 3/8" 44.1 14.2 22.0 24.4 9.5 24.0 25.4 34.1
MCm168 16 1/2" 49.0 19.0 22.0 24.4 11.9 24.0 25.4 39.0
MCm1612 16 3/4' 50.5 19.0 22.0 24.4 12.7 27.0 25.4 40.4
MCm2012 20 1/2" 52.3 19.0 22.0 26.0 11.9 32.0 32.0 42.2
MCm2016 20 3/4" 52.3 23.9 22.0 26.0 15.9 32.0 32.0 42.2
MCm2512 25 3/4" 57.5 19.0 26.5 31.3 15.9 35.0 38.1 45.2
MCm2516 25 1" 62.3 23.9 26.5 31.3 21.8 35.0 38.1 50.0
9
Blue Black
9
E T
A
B
H
F
G
DC
CD
H
Fx
E T
GE T
DC
HA
H
A
Fx
G
G
B
Hx
H
A
CD
E T
G
F
Note : Sizes & various combinations other than mentioned above are made on request.All Dimensions are for refeerence only and subject to change.
MALE CONNECTOR
MALE CONNECTOR
MALE CONNECTOR
Male Connector - SAE/MS
PART 'T' TUBE SAE/MS A B C D E F G H
NO. OD. thread ~ ~ ~ ~ MIN A/F A/F BODY
size
MC2-7-SM 1/8" 7/16-20 1.24 0.36 0.60 0.50 0.09 9/16" 7/16" 0.98
MC2-9-SM 1/8" 9/16-18 1.31 0.39 0.60 0.50 0.09 11/16" 7/16" 1.05
MC4-7-SM 1/4" 7/16-20 1.34 0.36 0.70 0.60 0.19 9/16" 9/16" 1.05
MC4-9-SM 1/4' 9/16-18 1.40 0.39 0.70 0.60 0.19 11/16" 9/16" 1.11
MC4-12-SM 1/4" 3/4-16 1.48 0.44 0.70 0.60 0.19 7/8" 9/16" 1.19
MC4-14-SM 1/4" 7/8-14 1.60 0.50 0.70 0.60 0.19 1" 9/16" 1.47
MC5-8-SM 5/16" 1/2-20 1.37 0.36 0.73 0.64 0.25 5/8" 5/8" 1.08
MC6-7-SM 3/8" 7/16-20 1.40 0.36 0.76 0.66 0.20 5/8" 11/16" 1.11
MC6-9-SM 3/8" 9/16-18 1.46 0.39 0.76 0.66 0.28 11/16" 11/16" 1.17
MC6-12-SM 3/8" 3/4-16 1.54 0.44 0.76 0.66 0.28 7/8" 11/16" 1.25
MC6-14-SM 3/8" 7/8-14 1.66 0.50 0.76 0.66 0.28 1" 11/16" 1.37
MC8-9-SM 1/2' 9/16-18 1.54 0.39 0.86 0.90 0.28 13/16" 7/8" 1.14
MC8-12-SM 1/2" 3/4-16 1.65 0.44 0.86 0.90 0.41 7/8" 7/8" 1.25
MC8-14-SM 1/2' 7/8-14 1.77 0.50 0.86 0.90 0.41 1" 7/8" 1.37
MC8-17-SM 1/2" 1 1/16-12 1.93 0.59 0.86 0.90 0.41 1-1/4" 7/8" 1.53
MC10-12-SM 5/8" 3/4-16 1.65 0.44 0.86 0.96 0.42 15/16" 1" 1.25
MC10-14-SM 5/8' 7/8-14 1.78 0.50 0.86 0.96 0.50 1" 1" 1.38
MC12-12-SM 3/4' 3/4-16 1.81 0.44 0.86 0.96 0.42 1-1/16" 1-1/8" 1.41
MC12-17-SM 3/4' 1 1/16-12 1.93 0.59 0.86 0.96 0.62 1-1/4" 1-1/8" 1.53
MC16-17-SM 1' 1 1/16-12 2.10 0.59 1.04 1.23 0.66 1-3/8" 1-1/2" 1.62
MC16-21-SM 1" 1 5/16-12 2.14 0.59 1.04 1.23 0.88 1-1/2" 1-1/2" 1.66
PART 'T' TUBE Pipe A B C D E F G H
NO. OD. thread ~ ~ ~ ~ MIN A/F A/F BODY
size
MC2-5-OS 1/8" 5/16-24 1.29 0.34 0.60 0.50 0.09 9/16" 7/16" 1.03
MC4-7-OS 1/4" 7/16-20 1.51 0.41 0.70 0.60 0.19 3/4" 9/16" 1.22
MC5-8-OS 5/16" 1/2-20 1.60 0.44 0.73 0.64 0.25 7/8" 5/8" 1.31
MC6-9-OS 3/8" 9/16-18 1.67 0.47 0.76 0.66 0.28 15/16" 11/16" 1.38
MC-8-12-OS 1/2" 3/4-16 1.81 0.47 0.86 0.90 0.41 1 1/8" 7/8" 1.41
MC-12-17-OS 3/4' 1 1/16-12 2.06 0.56 0.86 0.96 0.62 1 1/2" 1 1/8" 1.66
MC-16-21-OS 1" 1 5/16-12 2.29 0.56 1.04 1.23 0.88 1 3/4" 1 1/2" 1.81
Male Connector - O-Seal straight thread
GH
E T
B
A
DCF
E
G
T
H
B
A
DCF
10
10
Blue Black
Instrumentation & Controls Co. Ltd.Instrumentation & Controls Co. Ltd.
E T
A
CDB
H
F
G
E T
G
CD
B
Hx
H
F
Hx
G
H
E T
CD
F
Note : Sizes & various combinations other than mentioned above are made on request.
FEMALE CONNECTOR
FEMALE CONNECTORImperial tubing- FC
PART TUBE NPT. A B C D E F G H
NO. OD 'P' ~ ~ ~ MIN A/F A/F BODY
'T'
FC22 1/8" 1/8" 1.13 0.39 0.60 0.50 0.09 9/16" 7/16" 0.87
FC24 1/8" 1/4" 1.32 0.59 0.60 0.50 0.09 3/4" 7/16" 1.06
FC32 3/16" 1/8" 1.17 0.39 0.63 0.54 0.12 9/16" 1/2" 0.91
FC42 1/4" 1/8" 1.23 0.39 0.70 0.60 0.19 9/16" 9/16" 0.94
FC44 1/4" 1/4" 1.41 0.59 0.70 0.60 0.19 3/4" 9/16" 1.12
FC46 1/4" 3/8" 1.48 0.59 0.70 0.60 0.19 7/8" 9/16" 1.19
FC48 1/4" 1/2" 1.67 0.78 0.70 0.60 0.19 1-1/16" 9/16" 1.38
FC52 5/16" 1/8" 1.26 0.39 0.73 0.64 0.25 9/16" 5/8" 0.97
FC54 5/16" 1/4" 1.45 0.59 0.73 0.64 0.25 3/4" 5/8" 1.16
FC64 3/8" 1/4" 1.48 0.59 0.76 0.66 0.28 3/4" 11/16" 1.19
FC66 3/8' 3/8" 1.54 0.59 0.76 0.66 0.28 7/8" 11/16" 1.25
FC68 3/8" 1/2" 1.73 0.78 0.76 0.66 0.28 1-1/16" 11/16" 1.44
FC84 1/2" 1/4" 1.59 0.59 0.86 0.90 0.41 13/16" 7/8" 1.19
FC86 1/2" 3/8" 1.65 0.59 0.86 0.90 0.41 7/8" 7/8" 1.25
FC88 1/2" 1/2" 1.84 0.78 0.86 0.90 0.41 1-1/16" 7/8" 1.44
FC106 5/8" 3/8" 1.65 0.59 0.86 0.96 0.50 15/16" 1" 1.25
FC108 5/8" 1/2" 1.84 0.78 0.86 0.96 0.50 1-1/16" 1" 1.44
FC1012 5/8" 3/4" 1.90 0.81 0.86 0.96 0.50 1-1/4" 1' 1.50
FC128 3/4" 1/2" 1.84 0.78 0.86 0.96 0.62 1-1/16" 1-1/8" 1.44
FC1212 3/4" 3/4" 1.90 0.81 0.86 0.96 0.62 1-1/4" 1-1/8" 1.50
FC1412 7/8" 3/4" 1.96 0.81 0.86 1.02 0.72 1-1/4" 1-1/4" 1.56
FC1612 1" 3/4" 2.10 0.81 1.04 1.23 0.88 1-3/8" 1-1/2" 1.62
FC1616 1" 1" 2.45 1.00 1.04 1.23 0.88 1-5/8" 1-1/2" 1.97
Metric tubing - FCm
FCm32 3 1/8" 28.7 9.7 15.3 12.9 2.4 14.0 12.7 22.1
FCm34 3 1/4" 34.0 14.2 15.3 12.9 2.4 19.0 12.7 27.0
FCm62 6 1/8" 31.3 9.7 17.7 15.3 4.8 14.0 14.0 23.9
FCm64 6 1/4" 35.8 14.2 17.7 15.3 4.8 19.0 14.0 28.6
FCm66 6 3/8" 37.6 14.2 17.7 15.3 4.8 22.0 14.0 30.2
FCm68 6 1/2" 42.5 19.0 17.7 15.3 4.8 27.0 14.0 35.1
FCm84 8 1/4" 37.0 14.2 18.6. 16.2 6.3 19.0 16.0 29.5
FCm86 8 3/8" 38.5 14.2 18.6 16.2 6.3 22.0 16.0 31.0
FCm88 8 1/2" 43.3 19.0 18.6 16.2 6.3 27.0 16.0 35.8
FCm104 10 1/4" 37.8 14.2 19.5 17.2 7.1 19.0 19.0 30.5
FCm106 10 3/8" 39.4 14.2 19.5 17.2 7.9 22.0 19.0 31.8
FCm108 10 1/2" 44.2 19.0 19.5 17.2 7.9 27.0 19.0 36.6
FCm124 12 1/4" 40.3 14.2 22.0 22.8 9.5 20.5 22.0 30.2
FCm126 12 3/8" 41.9 14.2 22.0 22.8 9.5 22.0 22.0 31.8
FCm128 12 1/2" 46.7 19.0 22.0 22.8 9.5 27.0 22.0 36.6
FCm168 16 1/2" 46.8 19.0 22.0 24.4 12.7 27.0 25.4 36.6
FCm2012 20 3/4" 50.0 19.0 22.0 26.0 15.9 32.0 32.0 39.6
FCm2512 25 3/4" 53.4 19.0 26.5 31.3 15.9 36.0 38.0 41.2
FCm2516 25 1" 62.3 23.9 26.5 31.3 21.8 41.0 38.0 50.0
E T
G
ACDB
P
HF
11
11
Blue Black
CD
H
Fx
E T
GE T
DC
HA
H
A
Fx
G
G
B
Hx
H
A
CD
E T
G
F
Note : Sizes & various combinations other than mentioned above are made on request.All Dimnesions are for reference only and are subject to change
MALE BULKHEAD CONNECTOR
MALE BULKHEAD CONNECTOR
FEMALE BULKHEAD CONNECTOR FEMALE BULKHEAD CONNECTOR
Imperial tubing BMC
Imperial tubing BFC
PART TUBE NPT A H C D E F B Panel Max
NO. OD. P' BODY min A/F Hole Panel
T' Size Thk
BMC22 1/8" 1/8" 1.83 1.57 0.97 0.50 0.09 1/2" 0.38 21/64" 0.50
BMC42 1/4" 1/8" 1.95 1.66 1.03 0.60 0.19 5/8" 0.38 29/64" 0.40
BMC44 1/4" 1/4" 2.13 1.84 1.03 0.60 0.19 5/8" 0.56 29/64" 0.40
BMC64 3/8" 1/4" 2.26 1.97 1.16 0.66 0.28 3/4" 0.56 37/64" 0.44
BMC66 3/8" 3/8" 2.26 1.97 1.16 0.66 0.28 3/4" 0.56 37/64" 0.44
BMC68 3/8" 1/2" 2.51 2.22 1.16 0.66 0.28 7/8" 0.75 37/64" 0.44
BMC86 1/2" 3/8" 2.49 2.09 1.25 0.90 0.38 15/16" 0.56 49/64" 0.50
BMC88 1/2" 1/2" 2.71 2.31 1.25 0.90 0.41 15/16" 0.75 49/64" 0.50
BMC1212 3/4" 3/4" 3.00 2.60 1.47 0.96 0.62 1-3/16" 0.75 1-1/64" 0.66
BMC1616 1" 1" 3.67 3.19 1.78 1.23 0.88 1-5/8" 0.94 1-21/64" 0.75
Metric tubing BMCm
BMCm64 6 1/4" 53.6 46.2 26.2 15.3 4.8 16.0 14.0 11.5 10.2
BMCm128 12 1/2" 68.8 58.7 31.8 22.8 9.5 24.0 19.0 19.5 12.7
PART TUBE NPT A H C D E F B Panel Max
NO. OD. P' BODY min A/F Hole Panel
T' Size ThkBFC22 1/8" 1/8" 1.76 1.50 0.97 0.50 0.09 9/16" 0.41 21/64" 0.50BFC42 1/4" 1/8" 1.85 1.56 1.03 0.60 0.19 5/8" 0.41 29/64" 0.40BFC44 1/4" 1/4" 2.04 1.75 1.03 0.60 0.19 3/4" 0.59 29/64" 0.40BFC64 3/8" 1/4" 2.17 1.88 1.16 0.66 0.28 3/4" 0.59 37/64" 0.44BFC86 1/2" 3/8" 2.43 2.03 1.25 0.90 0.38 15/16" 0.59 49/64" 0.50BFC88 1/2" 1/2" 2.62 2.22 1.25 0.90 0.41 1-1/16" 0.78 49/64" 0.50 Metric tubing BFCm BFCm64 6 1/4" 51.8 44.4 26.2 15.3 4.8 19.0 15.0 11.5 10.2BFCm128 12 1/2" 66.5 56.4 31.8 22.8 9.5 27.0 19.8 19.5 12.7
BC
D
A
F
GT
H
E
A
F
P B
E T G
DC
F
12
12
Blue Black
Instrumentation & Controls Co. Ltd.Instrumentation & Controls Co. Ltd.
E T
A
CDB
H
F
G
E T
G
CD
B
Hx
H
F
Hx
G
H
E T
CD
F
Note : Sizes & various combinations other than mentioned above are made on request.All Dimnesions are for reference only and are subject to change
MALE ELBOW
MALE ELBOW
PART TUBE NPT. A B C D E F G Hx H
NO. OD 'P' ~ ~ ~ MIN A/F A/F BODY
'T'
EM22 1/8" 1/8" 0.97 0.38 0.60 0.50 0.09 1/2" 7/16" 0.74 0.71
EM24 1/8" 1/4" 0.97 0.56 0.60 0.50 0.09 9/16" 7/16" 0.98 0.71
EM32 3/16" 1/8" 1.00 0.38 0.63 0.54 0.12 1/2" 1/2" 0.74 0.74
EM42 1/4" 1/8" 1.13 0.38 0.70 0.60 0.19 9/16" 9/16" 0.85 0.84
EM44 1/4" 1/4" 1.13 0.56 0.70 0.60 0.19 9/16" 9/16" 0.98 0.84
EM46 1/4" 3/8" 1.17 0.56 0.70 0.60 0.19 11/16" 9/16" 1.03 0.88
EM48 1/4" 1/2" 1.29 0.75 0.70 0.60 0.19 7/8" 9/16" 1.30 1.00
EM52 5/16" 1/8" 1.13 0.38 0.73 0.64 0.19 9/16" 5/8" 0.85 0.84
EM54 5/16" 1/4" 1.13 0.56 0.73 0.64 0.25 9/16" 5/8" 0.98 0.84
EM64 3/8" 1/4" 1.20 0.56 0.76 0.66 0.28 9/16" 11/16" 1.00 0.91
EM66 3/8" 3/8" 1.23 0.56 0.76 0.66 0.28 11/16" 11/16" 1.03 0.94
EM68 3/8" 1/2" 1.35 0.75 0.76 0.66 0.28 7/8" 11/16" 1.30 1.06
EM84 1/2" 1/4" 1.42 0.56 0.86 0.90 0.28 13/16" 7/8" 1.11 1.02
EM86 1/2" 3/8" 1.42 0.56 0.86 0.90 0.38 13/16" 7/8" 1.11 1.02
EM88 1/2" 1/2" 1.42 0.75 0.86 0.90 0.41 7/8" 7/8" 1.30 1.02
EM106 5/8" 3/8" 1.46 0.75 0.86 0.96 0.38 15/16" 1" 1.19 1.06
EM108 5/8" 1/2" 1.46 0.75 0.86 0.96 0.47 15/16" 1" 1.38 1.06
EM1012 5/8" 3/4" 1.57 0.75 0.86 0.96 0.50 1-1/8" 1" 1.45 1.17
EM128 3/4" 1/2" 1.57 0.75 0.86 0.96 0.47 1-1/8" 1-1/8" 1.45 1.17
EM1212 3/4" 3/4" 1.57 0.75 0.86 0.96 0.62 1-1/8" 1-1/8" 1.45 1.17
EM1412 7/8" 3/4" 1.76 0.75 0.86 1.02 0.62 1-1/4" 1-1/4" 1.64 1.36
EM1612 1" 3/4" 1.92 0.75 1.04 1.23 0.62 1-3/8" 1-1/2" 1.64 1.45
EM1616 1" 1" 1.92 0.94 1.04 1.23 0.88 1-3/8" 1-1/2" 1.83 1.45
Metric Size Tubing-EMm
EMm32 3 1/8" 24.6 9.7 15.3 12.9 2.4 12.7 11.0 18.8 18.0
EMm34 3 1/4" 24.6 14.2 15.3 12.9 7.1 12.7 11.0 25.0 18.0
EMm62 6 1/8" 28.7 9.7 17.7 15.3 4.8 14.0 14.0 21.5 21.3
EMm64 6 1/4" 28.7 14.2 17.7 15.3 4.8 14.0 14.0 25.0 21.3
EMm66 6 3/8" 29.8 14.2 17.7 15.3 4.8 17.0 14.0 26.2 22.4
EMm68 6 1/2" 32.9 19.0 17.7 15.3 4.8 22.0 14.0 33.0 25.5
EMm82 8 1/8" 28.8 9.7 18.6 16.2 4.8 14.0 16.0 21.5 21.3
EMm84 8 1/4" 28.8 14.2 18.6 16.2 6.3 14.0 16.0 25.0 21.3
EMm86 8 3/8" 30.6 14.2 18.6 16.2 6.3 17.0 16.0 26.2 23.1
EMm88 8 1/2" 32.6 19.0 18.6 16.2 6.3 22.0 16.0 33.0 25.1
EMm104 10 1/4" 31.5 14.2 19.5 17.2 7.1 17.0 19.0 26.2 23.9
EMm106 10 3/8" 31.5 14.2 19.5 17.2 7.9 17.0 19.0 26.2 23.9
EMm108 10 1/2" 33.5 19.0 19.5 17.2 7.9 22.0 19.0 33.0 25.9
EMm126 12 3/8" 36.0 14.2 22.0 22.8 9.5 20.5 22.0 28.2 25.9
EMm128 12 1/2" 36.0 19.0 22.0 22.8 9.5 22.0 22.0 33.0 25.9
EMm168 16 1/2" 37.1 19.0 22.0 24.4 12.7 24.0 25.0 35.1 27.0
EMm2012 20 3/4" 44.6 19.0 22.0 26.0 15.9 32.0 32.0 41.7 34.5
EMm2512 25 3/4" 49.1 19.0 26.5 31.3 15.9 36.0 38.1 41.7 36.8
EMm2516 25 1" 49.1 23.8 26.5 31.3 21.8 36.0 38.1 46.5 36.8
Imperial tubing- EM
E T
G
CD
AP
B
Hx
HF
13
Blue Black
13
CD
H
Fx
E T
GE T
DC
HA
H
A
Fx
G
G
B
Hx
H
A
CD
E T
G
F
Note : Sizes & various combinations other than mentioned above are made on request.All Dimnesions are for reference only and are subject to change
PART TUBE NPT. A B C D E F G Hx H
NO. OD 'P' ~ ~ ~ MIN A/F A/F BODY
'T'
45EM22 1/8' 1/8" 0.97 0.38 0.60 0.50 0.09 9/16" 7/16" 0.59 0.65
45EM42 1/4" 1/8" 0.97 0.38 0.70 0.60 0.19 9/16" 9/16" 0.68 0.65
45EM44 1/4" 1/4" 0.97 0.56 0.70 0.60 0.19 9/16" 9/16" 0.68 0.83
45EM52 5/16" 1/8" 0.97 0.38 0.73 0.64 0.19 9/16" 5/8" 0.66 0.65
45EM62 3/8' 1/8" 1.10 0.38 0.76 0.66 0.19 9/16" 11/16" 0.81 0.72
45EM64 3/8' 1/4" 1.10 0.56 0.76 0.66 0.28 5/8" 11/16" 0.81 0.90
45EM66 3/8' 3/8" 1.15 0.56 0.76 0.66 0.28 11/16" 11/16" 0.86 0.95
45EM86 1/2" 3/8" 1.26 0.56 0.86 0.90 0.38 13/16" 7/8" 0.86 0.95
45EM88 1/2" 1/2" 1.26 0.75 0.86 0.90 0.41 7/8" 7/8" 0.86 1.14
45EM108 5/8" 1/2" 1.34 0.75 0.86 0.96 0.47 15/16" 1" 0.81 1.17
45EM1212 3/4" 3/4" 1.34 0.75 0.86 0.96 0.62 1-1/8" 1-1/8" 0.94 1.22
45EM1412 7/8" 3/4" 1.59 0.75 0.86 1.02 0.62 1-1/4" 1-1/4" 1.36 1.27
45EM1616 1" 1" 1.59 0.94 1.04 1.23 0.88 1-3/8" 1-1/2" 1.11 1.49
FEMALE ELBOWFEMALE ELBOW
45° MALE ELBOW45° MALE ELBOW
PART TUBE NPT A B C D E F G Hy Hx
NO. OD FEMALE ~ ~ MIN A/F A/F BODY
'T' 'P'
EF22 1/8" 1/8" 0.97 0.39 0.60 0.50 0.09 9/16" 7/16" 0.75 0.71
EF24 1/8" 1/4" 1.08 0.59 0.60 0.50 0.09 3/4" 7/16" 0.88 0.82
EF42 1/4" 1/8" 1.06 0.39 0.70 0.60 0.19 9/16" 9/16" 0.75 0.77
EF44 1/4" 1/4" 1.17 0.59 0.70 0.60 0.19 3/4" 9/16" 0.88 0.88
EF46 1/4' 3/8" 1.25 0.59 0.70 0.60 0.19 7/8" 9/16" 0.88 0.96
EF48 1/4" 1/2" 1.36 0.78 0.70 0.60 0.19 1-1/16" 9/16" 1.12 1.07
EF54 5/16" 1/4" 1.20 0.59 0.73 0.64 0.25 3/4" 5/8" 0.88 0.91
EF64 3/8" 1/4" 1.23 0.59 0.76 0.66 0.28 3/4" 11/16" 0.88 0.94
EF66 3/8" 3/8" 1.31 0.59 0.76 0.66 0.28 7/8" 11/16" 0.88 1.02
EF68 3/8' 1/2" 1.42 0.78 0.76 0.66 0.28 1-1/16" 11/16" 1.12 1.13
EF84 1/2" 1/4' 1.42 0.59 0.86 0.90 0.41 13/16" 7/8" 0.88 1.02
EF86 1/2' 3/8" 1.42 0.59 0.86 0.90 0.41 7/8" 7/8" 0.88 1.02
EF88 1/2" 1/2" 1.53 0.78 0.86 0.90 0.41 1-1/16" 7/8" 1.12 1.13
EF108 5/8" 1/2" 1.57 0.78 0.86 0.96 0.50 1-1/16" 1" 1.12 1.17
EF128 3/4" 1/2" 1.57 0.78 0.86 0.96 0.62 1-1/16" 1-1/8" 1.12 1.17
EF1212 3/4" 3/4" 1.76 0.81 0.86 0.96 0.62 1-1/4" 1-1/8" 1.25 1.36
Metric tubing- EFm
EFm32 3 1/8" 24.6 9.7 15.3 12.9 2.4 14.0 11.0 19.0 18.0
EFm34 3 1/4" 27.0 14.2 15.3 12.9 2.4 19.0 11.0 22.4 20.8
EFm62 6 1/8" 27.0 9.7 17.7 15.3 4.8 14.0 14.0 19.0 19.6
EFm64 6 1/4" 29.8 14.2 17.7 15.3 4.8 19.0 14.0 22.4 22.4
EFm66 6 3/8" 31.7 14.2 17.7 15.3 4.8 22.0 14.0 22.4 24.4
EFm68 6 1/2" 34.6 19.0 17.7 15.3 4.8 27.0 14.0 28.4 27.2
EFm84 8 1/4" 30.6 14.2 18.6 16.2 6.3 19.0 16.0 22.4 23.1
EFm104 10 1/4" 33.5 14.2 19.5 17.2 7.1 19.0 19.0 22.4 25.9
EFm124 12 1/4" 36.0 14.2 22.0 22.8 9.5 20.5 22.0 22.4 25.9
EFm126 12 3/8" 36.0 14.2 22.0 22.8 9.5 22.0 22.0 22.4 25.9
EFm128 12 1/2" 38.8 19.0 22.0 22.8 9.5 27.0 22.0 28.4 28.7
EFm1612 16 1/2" 39.5 19.0 22.0 24.4 12.7 27.0 25.0 28.4 29.7
TE
H GF
Hy
B
A
DC
P
PB
Hx
HA
CD
E T
GF
14
Imperial tubing - EF
Imperial tubing - 45EM
Blue Black
14
Instrumentation & Controls Co. Ltd.Instrumentation & Controls Co. Ltd.
E T
A
CDB
H
F
G
E T
G
CD
B
Hx
H
F
Hx
G
H
E T
CD
F
MALE BRANCH TEEMALE BRANCH TEE
PART TUBE NPT. A B C D E F G Hy Hx
NO. OD 'P' ~ ~ ~ MIN A/F A/F BODY
'T'
TMT22 1/8" 1/8" 0.93 0.38 0.60 0.50 0.09 1/2" 7/16" 0.70 0.67
TMT24 1/8" 1/4" 0.97 0.56 0.60 0.50 0.09 9/16" 7/16" 0.92 0.71
TMT42 1/4" 1/8" 1.06 0.38 0.70 0.60 0.19 1/2" 9/16" 0.74 0.77
TMT44 1/4" 1/4" 1.06 0.56 0.70 0.60 0.19 9/16" 9/16" 0.92 0.77
TMT54 5/16" 1/4" 1.17 0.56 0.73 0.64 0.25 9/16" 5/8" 0.92 0.88
TMT64 3/8" 1/4" 1.20 0.56 0.76 0.66 0.28 9/16" 11/16" 1.00 0.91
TMT66 3/8' 3/8" 1.31 0.56 0.76 0.66 0.28 11/16" 11/16" 1.11 1.02
TMT86 1/2" 3/8" 1.42 0.56 0.86 0.90 0.38 13/16" 7/8" 1.11 1.02
TMT88 1/2" 1/2" 1.42 0.75 0.86 0.90 0.41 7/8" 7/8" 1.30 1.02
TMT108 5/8" 1/2" 1.53 0.75 0.86 0.96 0.47 15/16" 1" 1.41 1.13
TMT1212 3/4" 3/4" 1.57 0.75 0.86 0.96 0.62 1-1/16" 1-1/8" 1.45 1.17
Metric Tubing -TMTm
TMTm32 3 1/8" 23.6 9.7 15.3 12.9 2.4 12.7 11.0 17.8 17.0
TMTm34 3 1/4" 24.6 14.2 15.3 12.9 2.4 14.0 11.0 23.4 18.0
TMTm62 6 1/8" 26.9 9.7 17.7 15.3 4.8 12.7 14.0 18.8 19.6
TMTm64 6 1/4" 26.9 14.2 17.7 15.3 4.8 14.0 14.0 23.4 19.6
TMTm82 8 1/8" 29.8 9.7 18.6 16.2 4.8 14.0 16.0 19.0 22.4
TMTm84 8 1/4" 29.8 14.2 18.6 16.2 6.3 14.0 16.0 23.4 22.4
TMTm104 10 1/4" 33.5 14.2 19.5 17.2 7.1 17.0 19.0 28.2 25.9
TMTm106 10 3/8" 33.5 14.2 19.5 17.2 7.9 17.0 19.0 28.2 25.9
TMTm126 12 3/8' 36.0 14.2 22.0 22.8 9.5 20.5 22.0 28.2 25.9
TMTm128 12 1/2" 36.0 19.0 22.0 22.8 9.5 22.0 22.0 33.0 25.9
TMTm168 16 1/2" 38.8 19.0 22.0 24.4 12.7 24.0 25.0 35.8 28.7
MALE RUN TEE
MALE RUN TEE
PART TUBE NPT. A B C D E F G Hy Hx
NO. OD 'P' ~ ~ ~ MIN A/F A/F BODY
'T'
TTM22 1/8" 1/8" 0.93 0.38 0.60 0.50 0.09 1/2" 7/16" 0.70 0.67
TTM24 1/8" 1/4" 0.97 0.56 0.60 0.50 0.09 9/16" 7/16" 0.92 0.71
TTM42 1/4" 1/8" 1.06 0.38 0.70 0.60 0.19 1/2" 9/16" 0.74 0.77
TTM44 1/4" 1/4" 1.06 0.56 0.70 0.60 0.19 9/16" 9/16" 0.92 0.77
TTM54 5/16" 1/4" 1.17 0.56 0.73 0.64 0.25 9/16" 5/8" 0.92 0.88
TTM64 3/8" 1/4" 1.20 0.56 0.76 0.66 0.28 9/16" 11/16" 1.00 0.91
TTM66 3/8' 3/8" 1.31 0.56 0.76 0.66 0.28 11/16" 11/16" 1.11 1.02
TTM86 1/2" 3/8" 1.42 0.56 0.86 0.90 0.38 13/16" 7/8" 1.11 1.02
TTM88 1/2" 1/2" 1.42 0.75 0.86 0.90 0.41 7/8" 7/8" 1.30 1.02
TTM108 5/8" 1/2" 1.53 0.75 0.86 0.96 0.47 15/16" 1" 1.41 1.13
TTM1212 3/4" 3/4" 1.57 0.75 0.86 0.96 0.62 1-1/16" 1-1/8" 1.45 1.17
Metric Tubing -TTMm
TTMm32 3 1/8" 23.6 9.7 15.3 12.9 2.4 12.7 11.0 17.8 17.0
TTMm34 3 1/4" 24.6 14.2 15.3 12.9 2.4 14.0 11.0 23.4 18.0
TTMm62 6 1/8" 26.9 9.7 17.7 15.3 4.8 12.7 14.0 18.8 19.6
TTMm64 6 1/4" 26.9 14.2 17.7 15.3 4.8 14.0 14.0 23.4 19.6
TTMm82 8 1/8" 29.8 9.7 18.6 16.2 4.8 14.0 16.0 19.0 22.4
TTMm84 8 1/4" 29.8 14.2 18.6 16.2 6.3 14.0 16.0 23.4 22.4
TTMm104 10 1/4" 33.5 14.2 19.5 17.2 7.1 17.0 19.0 28.2 25.9
TTMm106 10 3/8" 33.5 14.2 19.5 17.2 7.9 17.0 19.0 28.2 25.9
TTMm126 12 3/8" 36.0 14.2 22.0 22.8 9.5 20.5 22.0 28.2 25.9
TTMm128 12 1/2" 36.0 19.0 22.0 22.8 9.5 22.0 22.0 33.0 25.9
TTMm168 16 1/2" 38.8 19.0 22.0 24.4 12.7 24.0 25.0 35.8 28.7
TE
GHx
CD
PA
Hy
B
F
E T
DC
A
GHxHy
B
P
A F
15
Imperial tubing - TTM
Imperial tubing - TMT
Blue Black
15
CD
H
Fx
E T
GE T
DC
HA
H
A
Fx
G
G
B
Hx
H
A
CD
E T
G
F
Note : Sizes & various combinations other than mentioned above are made on request.All Dimnesions are for reference only and are subject to change
FEMALE BRANCH TEE
FEMALE BRANCH TEE
PART TUBE NPT. A B C D E F G Hy Hx
NO. OD 'P' ~ ~ ~ MIN A/F A/F ~ BODY
'T'
TFT22 1/8" 1/8" 0.97 0.39 0.60 0.50 0.09 9/16" 7/16" 0.75 0.71
TFT42 1/4" 1/8" 1.06 0.39 0.70 0.60 0.19 9/16" 9/16" 0.75 0.77
TFT44 1/4" 1/4" 1.17 0.59 0.70 0.60 0.19 3/4" 9/16" 0.88 0.88
TFT54 5/16" 1/4" 1.20 0.59 0.73 0.64 0.25 3/4" 5/8" 0.88 0.91
TFT64 3/8" 1/4" 1.23 0.59 0.76 0.66 0.28 3/4" 11/16" 0.88 0.94
TFT66 3/8" 3/8" 1.31 0.59 0.76 0.66 0.28 7/8" 11/16" 0.88 1.02
TFT84 1/2" 1/4' 1.42 0.59 0.86 0.90 0.41 13/16" 7/8" 0.88 1.02
TFT86 1/2" 3/8" 1.42 0.59 0.86 0.90 0.41 7/8" 7/8" 0.88 1.02
TFT88 1/2" 1/2" 1.53 0.78 0.86 0.90 0.41 1-1/16" 7/8" 1.12 1.13
TFT108 5/8" 1/2" 1.57 0.78 0.86 0.96 0.50 1-1/16" 1" 1.12 1.17
TFT128 3/4" 1/2" 1.57 0.78 0.86 0.96 0.62 1-1/16" 1-1/8" 1.12 1.17
TFT1212 3/4" 3/4" 1.76 0.81 0.86 0.96 0.62 1-1/4" 1-1/8" 1.25 1.36
Metric Tubing -TFTm
TFTm62 6 1/8" 27.0 9.7 17.7 15.3 4.8 14.0 14.0 19.0 19.6
TFTm64 6 1/4" 29.8 14.2 17.7 15.3 4.8 19.0 14.0 22.4 22.4
TFTm82 8 1/8" 29.7 10.4 18.6 16.2 6.3 15.0 16.0 22.4 19.6
TFTm84 8 1/4" 30.6 14.2 18.6 16.2 6.3 19.0 16.0 22.4 23.1
TFTm104 10 1/4" 33.5 14.2 19.5 17.2 7.1 19.0 19.0 22.4 25.9
TFTm124 12 1/4" 36.0 14.2 22.0 22.8 9.5 20.5 22.0 22.4 25.9
TFTm126 12 3/8" 36.0 14.2 22.0 22.8 9.5 22.0 22.0 22.4 25.9
TFTm168 16 1/2" 39.5 19.0 22.0 24.4 12.7 27.0 25.0 28.4 29.7
PART TUBE NPT. A B C D E F G Hy Hx
NO. OD 'P' ~ ~ ~ MIN A/F A/F ~ BODY
'T'
TTF22 1/8" 1/8" 0.97 0.39 0.60 0.50 0.09 9/16" 7/16" 0.75 0.71
TTF42 1/4" 1/8" 1.06 0.39 0.70 0.60 0.19 9/16" 9/16" 0.75 0.77
TTF44 1/4" 1/4" 1.17 0.59 0.70 0.60 0.19 3/4" 9/16" 0.88 0.88
TTF54 5/16" 1/4" 1.20 0.59 0.73 0.64 0.25 3/4" 5/8" 0.88 0.91
TTF64 3/8" 1/4" 1.23 0.59 0.76 0.66 0.28 3/4" 11/16" 0.88 0.94
TTF66 3/8" 3/8" 1.31 0.59 0.76 0.66 0.28 7/8" 11/16" 0.88 1.02
TTF84 1/2" 1/4" 1.42 0.59 0.86 0.90 0.41 13/16" 7/8" 0.88 1.02
TTF86 1/2" 3/8" 1.42 0.59 0.86 0.90 0.41 7/8" 7/8" 0.88 1.02
TTF88 1/2" 1/2" 1.53 0.78 0.86 0.90 0.41 1-1/16" 7/8" 1.12 1.13
TTF108 5/8" 1/2" 1.57 0.78 0.86 0.96 0.50 1-1/16" 1" 1.12 1.17
TTF1212 3/4" 1/2" 1.57 0.78 0.86 0.96 0.62 1-1/16" 1-1/8" 1.12 1.17
TTF1216 3/4" 3/4" 1.76 0.81 0.86 0.96 0.62 1-1/4" 1-1/8" 1.25 1.36
Metric Tubing - TTFm
TTFm62 6 1/8" 27.0 9.7 17.7 15.3 4.8 14.0 14.0 19.0 19.6
TTFm64 6 1/4" 29.8 14.2 17.7 15.3 4.8 19.0 14.0 22.4 22.4
TTFm82 8 1/8" 29.7 10.4 18.6 16.2 6.3 15.0 16.0 22.4 19.6
TTFm84 8 1/4" 30.6 14.2 18.6 16.2 6.3 19.0 16.0 22.4 23.1
TTFm104 10 1/4" 33.5 14.2 19.5 17.2 7.1 19.0 19.0 22.4 25.9
TTFm124 12 1/4" 36.0 14.2 22.0 22.8 9.5 20.5 22.0 22.4 25.9
TTFm126 12 3/8" 36.0 14.2 22.0 22.8 9.5 22.0 22.0 22.4 25.9
FEMALE RUN TEE
FEMALE RUN TEE
CD
A
Hx
Hy
B
P
FG
TE
E T
G
A
DCA F
BHy Hx
P
16
Imperial tubing - TFT
Imperial tubing - TTF
Blue Black
16
Instrumentation & Controls Co. Ltd.Instrumentation & Controls Co. Ltd.
E T
A
CDB
H
F
G
E T
G
CD
B
Hx
H
F
Hx
G
H
E T
CD
F
Note : Sizes & various combinations other than mentioned above are made on request.All Dimnesions are for reference only and are subject to change
FEMALE ADAPTOR
17
Blue Black
17
PART NO. T2 T1' F L L1 L2
TUBE NPT +/-0.5 +/-0.5 +/-0.5 +/-0.5
M.ADPT44 1/4" 1/4" 14.0 37.0 14.0 17.0
M.ADPT46 1/4" 3/8" 17.4 38.0 14.0 17.0
M.ADPT48 1/4" 1/2" 22.2 44.0 19.0 17.0
M.ADPT64 3/8" 1/4" 17.4 39.0 14.0 18.5
M.ADPT66 3/8" 3/8" 17.4 40.0 14.0 18.5
M.ADPT68 3/8" 1/2" 22.2 45.0 19.0 18.5
M.ADPT84 1/2" 1/4" 22.2 44.5 14.0 24.0
M.ADPT86 1/2" 3/8" 22.2 45.0 14.0 24.0
M.ADPT88 1/2" 1/2" 22.2 52.0 19.0 24.0
M.ADPT128 3/4" 1/2" 27.0 52.5 19.0 26.0
M.ADPT1212 3/4" 3/4" 27.0 52.5 19.0 26.0
PART NO. T2 T1' F L L1 L2
TUBE NPT +/-0.5 +/-0.5 +/-0.5 +/-0.5
F.ADPT44 1/4" 1/4" 19.0 37.0 14.0 17.0
F.ADPT46 1/4" 3/8" 22.0 40.0 14.0 17.0
F.ADPT48 1/4" 1/2" 27.0 46.0 19.0 17.0
F.ADPT64 3/8" 1/4" 19.0 38.0 14.0 18.5
F.ADPT66 3/8" 3/8" 22.0 41.0 14.0 18.5
F.ADPT68 3/8" 1/2" 27.0 47.0 19.0 18.5
F.ADPT84 1/2" 1/4" 19.0 44.0 14.0 24.0
F.ADPT86 1/2" 3/8" 22.0 46.0 14.0 24.0
F.ADPT88 1/2" 1/2" 27.0 52.0 19.0 24.0
F.ADPT128 3/4" 1/2" 27.0 53.0 19.0 26.0
F.ADPT1212 3/4" 3/4" 32.0 55.0 19.0 26.0
MALE ADAPTOR
FEMALE ADAPTOR
L3
F A/F
L
T2" TUBE
T1" NPT
L1 L2
MALE ADAPTOR
L1T2(F)
'F' A/F
L
T1 (M)
L2
CD
H
Fx
E T
GE T
DC
HA
H
A
Fx
G
G
B
Hx
H
A
CD
E T
G
F
Note : Sizes & various combinations other than mentioned above are made on request.All Dimnesions are for reference only and are subject to change
PART 'T' TUBE A C D Fx G
NO. OD ~ ~ ~ A/F A/F
ODCAP2 1/8" 0.79 0.60 0.50 7/16" 7/16"
ODCAP3 3/16" 0.84 0.63 0.64 7/16" 1/2"
ODCAP 4 1/4" 0.92 0.70 0.60 1/2" 9/16"
ODCAP5 5/16" 0.96 0.73 0.64 9/16" 5/8"
ODCAP 6 3/8" 1.01 0.76 0.66 5/8" 11/16"
ODCAP8 1/2" 1.15 0.86 0.90 13/16" 7/8"
ODCAP10 5/8" 1.18 0.86 0.96 15/16" 1"
ODCAP12 3/4" 1.24 0.86 0.96 1-1/16" 1-1/8"
ODCAP14 7/8" 1.34 0.86 1.02 1-1/4" 1-1/4"
ODCAP16 1" 1.51 1.04 1.23 1-3/8" 1-1/2"
Metric Tubeing- ODCAPm
ODCAPm3 3 20.1 12.9 12.7 11.0 11.0
ODCAPm6 6 23.1 15.3 15.3 14.0 14.0
ODCAPm8 8 24.5 16.2 16.3 14.0 16.0
ODCAPm10 10 26.6 17.2 17.5 17.0 19.0
ODCAPm12 12 29.1 23.0 22.9 20.6 22.0
ODCAPm16 16 29.9 24.6 24.4 24.0 25.4
ODCAPm20 20 34.0 26.1 25.9 30.0 32.0
ODCAPm25 25 38.5 31.2 31.2 35.0 38.0
OD CAP
OD CAP
PART 'T' TUBE G
NO. OD A/F
ODPLUG2 1/8" 7/16
ODPLUG3 3/16" 1/2
ODPLUG4 1/4" 9/16
ODPLUG5 5/16" 5/8
ODPLUG6 3/8" 11/16
ODPLUG8 1/2" 7/8
ODPLUG10 5/8" 1
ODPLUG12 3/4" 1-1/8
ODPLUG14 7/8" 1-1/4
ODPLUG16 1" 1-1/2
Metric tubing - ODPLUGm
ODPLUGm3 3 11.0
ODPLUGm6 6 14.0
ODPLUGm8 8 16.0
ODPLUGm10 10 19.0
ODPLUGm12 12 22.0
ODPLUGm16 16 25.4
ODPLUGm20 20 32.0
ODPLUGm25 25 38.0
OD PLUG
OD PLUG
T
H
DC
G
F
T
G
18
Imperial tubing - ODCAP
Inch size tubing - ODPLUG
Blue Black
18
Instrumentation & Controls Co. Ltd.Instrumentation & Controls Co. Ltd.
E T
A
CDB
H
F
G
E T
G
CD
B
Hx
H
F
Hx
G
H
E T
CD
F
Blue Black
23
Note : Sizes & various combinations other than mentioned above are made on request.
REDUCER
REDUCER
PART 'T' TUBE Tx A C D E F G
NO. OD. Tube OD ~ ~ ~ MIN A/F A/F
R24 1/8" 1/4" 1.42 0.60 0.50 0.09 7/16" 7/16"
R34 3/16" 1/4" 1.46 0.63 0.54 0.12 7/16" 1/2"
R46 1/4" 3/8" 1.60 0.70 0.60 0.19 1/2" 9/16"
R48 1/4" 1/2" 1.82 0.70 0.60 0.19 9/16" 9/16"
R56 5/16" 3/8" 1.65 0.73 0.64 0.25 9/16" 5/8"
R64 3/8" 1/4' 1.63 0.76 0.66 0.19 5/8" 11/16"
R68 3/8" 1/2" 1.91 0.76 0.66 0.28 5/8" 11/16"
R84 1/2" 1/4" 1.77 0.86 0.90 0.19 13/16" 7/8"
R86 1/2" 3/8" 1.84 0.86 0.90 0.28 13/16" 7/8"
R812 1/2" 3/4" 2.12 0.86 0.90 0.41 13/16" 7/8"
R1012 5/8' 3/4" 2.15 0.86 0.96 0.50 15/16" 1"
R128 3/4" 1/2" 2.15 0.86 0.96 0.39 1-1/16" 1-1/8"
R1216 3/4" 1" 2.46 0.86 0.96 0.62 1-1/16" 1-1/8"
R1620 1" 1 1/4" 3.17 1.04 1.23 0.88 1-3/8" 1-1/2"
Reducer - Metric Tubing - Rm
Rm68 6 8 39.9 17.7 15.3 4.8 14.0 14.0
Rm610 6 10 40.7 17.7 15.3 4.8 14.0 14.0
Rm612 6 12 46.3 17.7 15.3 4.8 14.0 14.0
Rm810 8 10 42.0 18.6 16.2 6.3 15.0 16.0
Rm812 8 12 47.6 18.6 16.2 6.3 15.0 16.0
Rm108 10 8 43.4 19.5 17.2 7.9 18.0 19.0
Rm1012 10 12 49.8 19.5 17.2 7.9 18.0 19.0
Rm1210 12 10 46.7 22.0 22.8 7.7 22.0 22.0
Rm1216 12 16 53.8 22.0 22.8 9.5 22.0 22.0
Rm2016 20 16 57.9 22.0 26.0 12.7 30.0 32.0
Rm2025 20 25 64.2 22.0 26.0 15.1 30.0 32.0
Rm2520 25 20 64.6 26.5 31.3 15.1 35.0 38.1
PART 'T' TUBE H J E
NO. OD Min
PC2 1/8" 0.88 0.24 0.09
PC4 1/4" 0.97 0.37 0.19
PC5 5/16" 1.02 0.43 0.25
PC6 3/8" 1.03 0.50 0.30
PC8 1/2" 1.41 0.62 0.39
PC12 3/4" 1.47 0.87 0.59
PC16 1" 1.89 1.12 0.80
Metric tubing - PCm
PCm6 6 24.6 9.0 4.4
PCm8 8 25.9 11.0 6.2
PCm10 10 26.1 13.1 8.2
PCm12 12 35.8 15.0 9.1
PCm16 16 37.4 19.0 12.7
PCm20 20 38.9 23.0 15.1
PCm25 25 48.0 28.0 19.8
PORT CONNECTOR
PORT CONNECTOR
TE
HG
A
BCD
F
Tx
G
T J
H
19
Reducer - Imperial Tubing R
Inch size tubing - PC
19
CD
H
Fx
E T
GE T
DC
HA
H
A
Fx
G
G
B
Hx
H
A
CD
E T
G
F
Blue Black
NUTNUT
Inch size tubing-NUT
PART TUBE G L
NO. OD A/F
T'
NUT2 1/8" 7/16" 0.47
NUT3 3/16" 1/2" 0.47
NUT4 1/4" 9/16" 0.50
NUT5 5/16" 5/8" 0.53
NUT6 3/8" 11/16" 0.56
NUT8 1/2" 7/8" 0.69
NUT10 5/8" 1" 0.69
NUT12 3/4" 1-1/8" 0.69
NUT14 7/8" 1-1/4" 0.69
NUT16 1" 1-1/2" 0.81
Metric tubing-NUTm
PART TUBE G L
NO. OD A/F
T'
NUTm3 3 11.0 11.9
NUTm6 6 14.0 12.7
NUTm8 8 16.0 13.5
NUTm10 10 19.0 15.1
NUTm12 12 22.0 17.4
NUTm16 16 25.0 17.4
NUTm20 20 32.0 17.4
NUTm25 25 38.0 20.6
Inch size tubing-FF
PART 'T' TUBE
NO. OD
FF2 1/8"
FF4 1/4"
FF5 5/16"
FF6 3/8"
FF8 1/2"
FF10 5/8"
FF12 3/4"
FF14 7/8"
FF16 1"
Metric Size tubing-FFm
PART 'T' TUBE
NO. OD
FFm3 3
FFm6 6
FFm8 8
FFm10 10
FFm12 12
FFm16 16
FFm20 20
FFm25 25
FRONT FERRULEFRONT FERRULE
Inch size tubing-BF
PART 'T' TUBE
NO. OD
BF2 1/8"
BF4 1/4"
BF5 5/16"
BF6 3/8"
BF8 1/2"
BF10 5/8"
BF12 3/4"
BF14 7/8"
BF16 1"
Metric Size tubing-BFm
PART 'T' TUBE
NO. OD
BFm3 3
BFm6 6
BFm8 8
BFm10 10
BFm12 12
BFm16 16
BFm20 20
BFm25 25
BACK FERRULEBACK FERRULE
Inch size tubing-SF
PART 'T' TUBE
NO. OD
SF2 1/8"
SF4 1/4"
SF5 5/16"
SF6 3/8"
SF8 1/2"
SF10 5/8"
SF12 3/4"
SF14 7/8"
SF16 1"
Metric Size tubing-SFm
PART 'T' TUBE
NO. OD
SFm3 3
SFm6 6
SFm8 8
SFm10 10
SFm12 12
SFm16 16
SFm20 20
SFm25 25
SINGLE FERRULESINGLE FERRULE
Note : Sizes & various combinations other than mentioned above are made on request.
T
L
G
T
T
T
20
20
Instrumentation & Controls Co. Ltd.Instrumentation & Controls Co. Ltd.
E T
A
CDB
H
F
G
E T
G
CD
B
Hx
H
F
Hx
G
H
E T
CD
F
21
Blue Black
21
Note : Various combinations, configurations and bigger sizes are available on request
Pipe Fittings
Instrument Pipe Fittings :
Features
• Available with choice of NPT/BSPT/BSP/SAE/ISO pipe threads, weld end and hose end fittings.
• Wide range of sizes, combinations and configurations.
• Manufactured in wide range of material like Stainless Steel, Steel, Brass, Aluminum, Titanium, Hastalloy, Monel and other special alloys.
• Straight items are made from fine quality extruded bars, all shaped items are made from close
grain forgings.
• Size range from 1/8” to ¾”. Bigger sizes are available on request.
• All threads are capped to avoid damages.
PIPE FITTINGS
PART NO. SIZE F T L
NPT(F)
CAP2 1/8" 9/16" 1/8" 0.53
CAP4 1/4" 3/4" 1/4" 0.71
CAP6 3/8" 7/8" 3/8" 0.71
CAP8 1/2" 1-1/16" 1/2" 0.94
CAP12 3/4" 1-1/4" 3/4" 0.98
CAP16 1" 1-5/8" 1" 1.22
FEMALE CAP FEMALE CAP
PART NO. SIZE T F L
NPT A/F
PLUG2 1/8" 1/8" 1/2" 0.59
PLUG4 1/4" 1/4" 9/16" 0.79
PLUG6 3/8" 3/8" 11/16" 0.81
PLUG8 1/2" 1/2" 7/8" 1.06
PLUG12 3/4" 3/4" 1-1/16" 1.10
PLUG16 1" 1" 1-3/8" 1.34
HEX PLUG HEX PLUG
PART NO. SIZE T F L
NPT A/F
A.PLUG2 1/8" 1/8" 3/16" 0.30
A.PLUG4 1/4" 1/4" 1/4" 0.47
A.PLUG6 3/8" 3/8" 5/16" 0.47
ALLEN PLUG ALLEN PLUG
UNION BALL JOINTUNION BALL JOINT
L
F
T
F
L
L
TF
F G
L
T T
PART NO. SIZE T F G L
NPT A/F A/F
UBJ2 1/8" 1/8" 15/16" 1-1/8" 1.81
UBJ4 1/4" 1/4" 1-3/16" 1-3/8" 2.34
UBJ6 3/8" 3/8" 1-5/16" 1-1/2" 2.50
UBJ8 1/2" 1/2" 1-5/8" 1-3/4" 2.69
UBJ12 3/4" 3/4" 1-7/8" 2" 3.12
UBJ16 1" 1" 2-3/8" 2-1/2" 3.56
اكمام الانابیب
CD
H
Fx
E T
GE T
DC
HA
H
A
Fx
G
G
B
Hx
H
A
CD
E T
G
F
22
Blue Black
22
PART NO. SIZE T1 T2 F L
NPT ISOP A/F
HNIPP2-2-ISO 1/8"X1/8" 1/8" 1/8"-28 9/16" 1.07
HNIPP4-4-ISO 1/4"X1/4" 1/4" 1/4"-19 3/4" 1.44
HNIPP6-6-ISO 3/8"X3/8" 3/8" 3/8"-19 7/8" 1.47
HNIPP8-8-ISO 1/2"X1/2" 1/2" 1/2"-14 1-1/16" 1.78
HNIPP12-12-ISO 3/4"X3/4" 3/4" 3/4"-14 1-5/16" 1.95
HNIPP16-16-ISO 1"X1" 1" 1"-11 1-5/8" 2.26
PART NO. SIZE T1 T2 F L
NPT SAE A/F
HNIPP4-4-SAE 1/4"X1/4" 1/4" 7/16"-20 9/16" 1.20
HNIPP6-6-SAE 3/8"X3/8" 3/8" 9/16"-18 11/16" 1.26
HNIPP8-8-SAE 1/2"X1/2" 1/2" 3/4"-16 7/8" 1.53
HNIPP12-12-SAE 3/4"X3/4" 3/4" 1-1/16"-12 1-1/4" 1.75
HNIPP16-16-SAE 1"X1" 1" 1-5/16"-12 1-1/2" 2.00
HEX NIPPLE- NPT(M) x ISOT(M) HEX NIPPLE- NPT(M) x ISOT(M)
HEX NIPPLE- NPT(M) x SAE(M) HEX NIPPLE - NPT(M) x SAE(M)
HEX NIPPLE HEX NIPPLE
PART NO. SIZE T' NPT F L
A/F
HNIPP2 1/8" 1/8" 1/2" 0.96
HNIPP4 1/4" 1/4" 9/16" 1.34
HNIPP6 3/8" 3/8" 11/16" 1.36
HNIPP8 1/2" 1/2" 7/8" 1.81
HNIPP12 3/4" 3/4" 1-1/16" 1.85
HNIPP16 1" 1" 1-3/8" 2.28
REDUCING HEX NIPPLE REDUCING HEX NIPPLE
PART NO. SIZE T1 T2 F L
NPT NPT A/F
RHNIPP42 1/4"X1/8" 1/4" 1/8" 9/16" 1.16
RHNIPP62 3/8"X1/8" 3/8" 1/8" 11/16" 1.18
RHNIPP64 3/8"X1/4" 3/8" 1/4" 11/16" 1.36
RHNIPP84 1/2"X1/4" 1/2" 1/4" 7/8" 1.61
RHNIPP86 1/2"X3/8" 1/2" 3/8" 7/8" 1.61
RHNIPP124 3/4"X1/4" 3/4" 1/4" 1-1/16" 1.65
RHNIPP126 3/4"X3/8" 3/4" 3/8" 1-1/16" 1.65
RHNIPP128 3/4"X1/2" 3/4" 1/2" 1-1/16" 1.85
RHNIPP168 1"X1/2" 1" 1/2" 1-3/8" 2.09
RHNIPP1612 1"X3/4" 1" 3/4" 1-3/8" 2.09
Note : Various combinations, configurations and bigger sizes are available on requestAll Dimnesions are for reference only and are subject to change
L
FT1 T2
L
FT2
T1
L
FT2
T1
L
FT T
Instrumentation & Controls Co. Ltd.Instrumentation & Controls Co. Ltd.
E T
A
CDB
H
F
G
E T
G
CD
B
Hx
H
F
Hx
G
H
E T
CD
F
23
Blue Black
23
Note : Various combinations, configurations and bigger sizes are available on requestAll Dimnesions are for reference only and are subject to change
PART NO. SIZE M/F T1 T2 F L
NPT NPT
ADPT22 1/8"X1/8" 1/8" 1/8" 9/16" 0.89
ADPT24 1/8"X1/4" 1/8" 1/4" 3/4" 1.06
ADPT46 1/4"X3/8" 1/4" 3/8" 7/8" 1.28
ADPT48 1/4"X1/2" 1/4" 1/2" 1-1/16" 1.50
ADPT412 1/4"X3/4" 1/4" 3/4" 1-1/4" 1.54
ADPT68 3/8"X1/2" 3/8" 1/2" 1-1/16" 1.50
ADPT612 3/8"X3/4" 3/8" 3/4" 1-1/4" 1.54
ADPT88 1/2"X1/2" 1/2" 1/2" 1-1/16" 1.73
ADPT812 1/2"X3/4" 1/2" 3/4" 1-1/4" 1.73
ADPT816 1/2"X1" 1/2" 1" 1-5/8" 2.01
ADPT1216 3/4"X1" 3/4" 1" 1-5/8" 2.01
M/F ADAPTOR M/F ADAPTOR
PART NO. SIZE M/F T1 T2 F L
A/F
BUSH42 1/4"x1/8" 1/4" 1/8" 9/16" 0.93
BUSH62 3/8"x1/8" 3/8" 1/8" 11/16" 0.81
BUSH64 3/8""x1/4" 3/8" 1/4" 3/4" 1.10
BUSH82 1/2"X1/8" 1/2" 1/8" 7/8" 1.06
BUSH84 1/2"X1/4" 1/2" 1/4" 7/8" 1.06
BUSH86 1/2"X3/8" 1/2" 3/8" 7/8" 1.30
BUSH124 3/4"X1/4" 3/4" 1/4" 1-1/16" 1.10
BUSH126 3/4"X3/8" 3/4" 3/8" 1-1/16" 1.10
BUSH128 3/4"X1/2" 3/4" 1/2" 1-1/16" 1.50
BUSH168 1"X1/2" 1" 1/2" 1-3/8" 1.34
BUSH1612 1"X3/4" 1" 3/4" 1-3/8" 1.69
BUSHING BUSHING
PART NO. SIZE T F L
A/F
COPL2 1/8" 1/8" 9/16" 0.81
COPL4 1/4" 1/4" 3/4" 1.18
COPL6 3/8" 3/8" 7/8" 1.18
COPL8 1/2" 1/2" 1-1/16" 1.57
COPL12 3/4" 3/4" 1-1/4" 1.61
COPL16 1" 1" 1-5/8" 2.01
PART NO. SIZE M/F T1 T2 F L
R.COPL42 1/4"x1/8" 1/4" 1/8" 3/4" 1.00
R.COPL62 3/8"x1/8" 3/8" 1/8" 7/8" 1.00
R.COPL64 3/8""x1/4" 3/8" 1/4" 7/8" 1.18
R.COPL82 1/2"X1/8" 1/2" 1/8" 1-1/16" 1.20
R.COPL84 1/2"X1/4" 1/2" 1/4" 1-1/16" 1.38
R.COPL86 1/2"X3/8" 1/2" 3/8" 1-1/16" 1.38
R.COPL88 1/2" X 1/2' 1/2" 1/2" 1-1/16" 1.57
R.COPL124 3/4"X1/4" 3/4" 1/4" 1-1/4" 1.42
R.COPL126 3/4"X3/8" 3/4" 3/8" 1-1/4" 1.42
R.COPL128 3/4"X1/2" 3/4" 1/2" 1-1/4" 1.61
R.COPL168 1"X1/2" 1" 1/2" 1-5/8" 1.85
R.COPL1612 1"X3/4" 1" 3/4" 1-5/8" 1.85
HEX COUPLING HEX COUPLING
REDUCING HEX COUPLING REDUCING HEX COUPLING
L
T1F
T2
L
T2
F T1
L
F
TT
L
F
T1 T2
CD
H
Fx
E T
GE T
DC
HA
H
A
Fx
G
G
B
Hx
H
A
CD
E T
G
F
24
Blue Black
24
Note : Various combinations, configurations and bigger sizes are available on requestAll Dimnesions are for reference only and are subject to change
PART NO. SIZE M/F F T1 T2 L1 L2
A/F ~ ~
E.M/F22 1/8"X1/8" 9/16" 1/8" 1/8" 0.67 0.87
E.M/F44 1/4"X1/4" 11/16" 1/4" 1/4" 0.98 0.75
E.M/F66 3/8"X3/8" 7/8" 3/8" 3/8" 1.02 1.02
E.M/F88 1/2"X1/2" 1-1/16" 1/2" 1/2" 1.34 1.22
E.M/F1212 3/4"X3/4" 1-1/4" 3/4" 3/4" 1.57 1.22
E.M/F1616 1"X1" 1-5/8" 1" 1" 1.97 1.81
PART NO. SIZE T F L
NPT(F)
F.EL2 1/8" 1/8" 9/16" 0.75
F.EL4 1/4" 1/4" 3/4" 0.94
F.EL6 3/8" 3/8" 7/8" 1.02
F.EL8 1/2" 1/2" 1-1/16" 1.22
F.EL12 3/4" 3/4" 1-1/4" 1.14
FEMALE ELBOW
PART NO. SIZE T1 F L
NPT
E.M/M22 1/8" 1/8" 1/2" 0.67
E.M/M44 1/4" 1/4" 9/16" 0.98
E.M/M66 3/8" 3/8" 11/16" 1.02
E.M/M88 1/2" 1/2" 7/8" 1.34
E.M/M1212 3/4" 3/4" 1-1/16" 1.57
MALE ELBOW
STREET ELBOW
PART NO. SIZE T F L
NPT(F)
45F.EL2 1/8" 1/8" 9/16" 0.47
45F.EL4 1/4" 1/4" 3/4" 0.69
45F.EL6 3/8" 3/8" 7/8" 0.75
45F.EL8 1/2" 1/2" 1-1/16" 0.94
45F.EL12 3/4" 3/4" 1-1/4" 1.00
PART NO. SIZE T1 F L1 L2
NPT
45E.M/F22 1/8" 1/8" 1/2" 0.72 0.47
45E.M/F44 1/4" 1/4" 9/16" 1.05 0.63
45E.M/F66 3/8" 3/8" 11/16" 1.06 0.72
45E.M/F88 1/2" 1/2" 7/8" 1.34 0.91
45E.M/F1212 3/4" 3/4" 1-1/16" 1.38 0.97
45° FEMALE ELBOW
45° STREET ELBOW
L
L
F
T
F
L
L
T
F
L1
L2
T2
T1
F
L
LT
L2
T
F
L1
Instrumentation & Controls Co. Ltd.Instrumentation & Controls Co. Ltd.
FEMALE ELBOW
MALE ELBOW
STREET ELBOW
45° FEMALE ELBOW
45° STREET ELBOW
E T
A
CDB
H
F
G
E T
G
CD
B
Hx
H
F
Hx
G
H
E T
CD
F
25
Blue Black
25
PART NO. SIZE T F L
NPT(M)
M.TEE2 1/8" 1/8" 1/2" 0.75
M.TEE4 1/4" 1/4" 9/16" 0.87
M.TEE6 3/8" 3/8" 11/16" 0.94
M.TEE8 1/2" 1/2" 7/8" 1.30
M.TEE12 3/4" 3/4" 1-1/16" 1.38
PART NO. SIZE F T L
NPT(F)
F.TEE2 1/8" 9/16" 1/8" 0.79
F.TEE4 1/4" 11/16" 1/4" 0.94
F.TEE6 3/8" 7/8" 3/8" 0.98
F.TEE8 1/2" 1-1/16" 1/2" 1.22
F.TEE12 3/4" 1-1/4" 3/4" 1.57
MALE TEE
FEMALE TEE
PART NO. SIZE F T L
F.CR2 1/8" 9/16" 1/8" 0.79
F.CR4 1/4" 11/16" 1/4" 0.83
F.CR6 3/8" 7/8" 3/8" 0.98
F.CR8 1/2" 1-1/16" 1/2" 1.22
FEMALE CROSS
PART NO. SIZE M/F F T1 T2 L1 L2
TTF.M/F22 1/8"X1/8" 9/16" 1/8" 1/8" 0.83 0.75
TTF.M/F44 1/4"X1/4" 3/4" 1/4" 1/4" 1.16 0.89
TTF.M/F66 3/8"X3/8" 7/8" 3/8" 3/8" 1.34 1.02
TTF.M/F88 1/2"X1/2" 1-1/16" 1/2" 1/2" 1.50 1.18
PART NO. SIZE M/F F T1 T2 L1 L2
TFT.M/F22 1/8"X1/8" 9/16" 1/8" 1/8" 0.83 0.75
TFT.M/F44 1/4"X1/4" 3/4" 1/4" 1/4" 0.98 0.87
TFT.M/F66 3/8"X3/8" 7/8" 3/8" 3/8" 1.34 1.02
TFT.M/F88 1/2"X1/2" 1-1/16" 1/2" 1/2" 1.50 1.18
TFT.M/F1212 3/4"X3/4" 1-1/4" 3/4" 3/4" 1.89 1.57
STREET TEE
MALE FEMALE BRANCH TEE
L
F
T
L
T
F
L1L2
T1
T2
L2
L2 L2
L1
T1
T2F
Note : Various combinations, configurations and bigger sizes are available on requestAll Dimnesions are for reference only and are subject to change
F
LT
MALE TEE
FEMALE TEE
STREET TEE
MALE FEMALE BRANCH TEE
FEMALE CROSS
CD
H
Fx
E T
GE T
DC
HA
H
A
Fx
G
G
B
Hx
H
A
CD
E T
G
F
26
Blue Black
26
NEEDLE VALVE
Needle Valve
'ICCL' Needle valves are made for various operating pressure and temperatures. Looking at ever increasing demand and variety of applications, we have developed special purpose valves for instrumentation and flow control application.
DESIGN: Needle valves are also known as isolation valve, shut off valve or regulatory valve. Rotating angle tipped spindle, which in turn moves axially over the orifice seat, controls flow of the fluid. At the lower most position or closed position of the spindle, inlet orifice is completely blocked and thus isolates the fluid flow. In open condition Teflon or Grafoil packing seal restricts the leakage from the bonnet end.
NOTE : Forged body Needle valves - Single piece Design, are also available in various sizes end connectionsAll Dimnesions are for reference only and are subject to change
PART NO. SIZE T' D L H NPT(F) Open
PNV-FB-S-2FF-T 1/8" 1/8" 0.79 1.97 2.28PNV-FB-S-4FF-T 1/4" 1/4" 0.79 1.97 2.28PNV-FB-S-6FF-T 3/8" 3/8" 0.98 1.97 2.44PNV-FB-S-8FF-T 1/2" 1/2" 1.26 2.52 2.87PNV-FB-S-12FF-T 3/4" 3/4" 1.42 2.52 3.07PNV-FB-S-16FF-T 1" 1" 1.69 3.31 3.94
Forged Body Needle Valve - Tube end PART NO. SIZE T' L H Tube OD Open
PNV-FB-S-4TT-T 1/4" 1/4" 2.55 2.28 PNV-FB-S-6TT-T 3/8" 3/8" 2.55 2.28 PNV-FB-S-8TT-T 1/2" 1/2" 2.77 2.44
Forged Body Needle Valve - Female end
Forged body Needle Valve :Features:
• Single piece SS forged body construction
• Straight or angle pattern with optional panel mounting design.
• Metal to metal, stellited seat for high-pressure application.
• One piece or non-rotating Vee tipped spindle.
• Non-rotating ball tipped or stellited tip are optionally provided for stringent application.
• Teflon or Grefoil packing seal for bubble free joint at various temperatures.
• Powder coated Metal Handle for easy control.
• Variety of end connections includes, Single or double ferrule tube end, male or female NPT, BSP, ISO, JIS or DIN pipe end.
• Pressure rating 3000-10000 psi (200-650 bar) at 100-500° F/ 37-260°C..
• 100% factory tested.
صمامات ابریة
DØ
L
T
H
L
H
T
Instrumentation & Controls Co. Ltd.Instrumentation & Controls Co. Ltd.
E T
A
CDB
H
F
G
E T
G
CD
B
Hx
H
F
Hx
G
H
E T
CD
F
27
Blue Black
27
NOTE : Forged body Needle valves - Single piece Design, are also available in various sizes end connectionsAll Dimnesions are for reference only and are subject to change
Special purpose Needle Valve :
Features:
! For protecting the instrument with contaminated fluids and constant pressure, optional bleed plug or a bleed valve is provided so as to release the residual fluid/ pressure on instrument side after use.
! Union bonnet type or special screwed Bonnet type needle valves are made for safety at high pressure.
! Needle valve with packing material below actuating threads are made to ensure bubble free shut off.
Needle valve with bleed plug to release residual fluid after isolation valve shuts off, which avoid continuous pressure on the instrument. Generally used for pressure gauge. Process and instrument sides can be provided with different sizes(1/8”-3/4”) and various end connections (Tube end, female or male end)
7829
30
ISOLATION VALVE
Bleed Plug
Instrument12" NPT(F)
Process 12" NPT(F)
Screwed Bonnet Needle Valve - Female end PART NO. SIZE T' F L H NPT(F) A/F Open
PNV-SB-S-4FF-T 1/4" 1/4" 0.87 2.01 2.28 PNV-SB-S-6FF-T 3/8" 3/8" 0.98 2.01 2.44 PNV-SB-S-8FF-T 1/2" 1/2" 1.18 2.56 2.87 PNV-SB-S-12FF-T 3/4" 3/4" 1.50 2.76 3.07 PNV-SB-S-16FF-T 1" 1" 1.73 3.74 3.94
Screwed Bonnet Needle Valve:
Features :
! Round or square body screwed bonnet construction for medium pressure application.
! Straight or angle pattern with optional panel mounting design.
! Metal to metal, stellited seat for high-pressure application, soft seat for low-density non-lubricating fluids.
! One piece or non-rotating Vee tipped spindle.
! Non-rotating ball tipped or stellited tip are optionally provided for stringent application.
! Teflon or Grefoil packing seal for bubble free joint at various temperatures.
! Powder coated Metal Handle for easy control.
! Variety of end connections includes, Single or double ferrule tube end, male or female NPT, BSP, ISO, JIS or DIN pipe end.
! Pressure rating 1000-5000 psi(70-350 BAR) at 100-500° F (37-260°C).
! 100% factory tested.
! Material of construction: SS, M.S, Monel, Brass, Aluminum, Titanium, and Hastalloy.
H
L
TF
CD
H
Fx
E T
GE T
DC
HA
H
A
Fx
G
G
B
Hx
H
A
CD
E T
G
F
28
28
Blue Black
NOTE : Bar Stock Needle valves - Two piece Design, are also available in various sizes end connectionsAll Dimnesions are for reference only and are subject to change
Two way block and bleed valve have one isolation and one drain valve to release residual fluid after isolation valve shuts off, which avoid continuous pressure on the instrument. Drain port (¼”NPT) can be connected back to process side to avoid wastage of fluid. Generally used for pressure gauge. Both instrument and process sides are 1/2”NPT threaded ends
Two way block and bleed valve have one isolation and one drain valve to release residual fluid after isolation valve shuts off, which avoid continuous pressure on the instrument. Generally used for pressure gauge. Process and instrument sides can be provided with different sizes (1/8”-3/4”) and various end connections (Tube end, female or male end)
Special purpose Needle Valve :Block & Bleed valve
Block & Bleed valve - Gauge Valve
BLEED
VALVE
72
36
ISOLATION VALVE
Instrument
12" NPT(F)
Process 12" NPT(F)
ISOLATION VALVE
Drain 14" NPT(F)
BLE
ED
VA
LVE
Process½”NPTM
Instrument½”NPTF
Bleed Plug
ISOLATION VALVE
BLEED VALVE
115
Instrumentation & Controls Co. Ltd.Instrumentation & Controls Co. Ltd.
E T
A
CDB
H
F
G
E T
G
CD
B
Hx
H
F
Hx
G
H
E T
CD
F
29
29
BALL VALVE
Ball valves are most widely used valves in the world. Main advantages aver Needle valve or Globe valves are
1. Ball Valves gives full flow in open position.2. No throttling or pressure drop across the valve.3. Useful even for high-density fluid.4. Contaminated particles dose not affect the flow5. Full flow at ¼ turn.
'ICCL' make ball valves has been divided into two categories namely Instrument Ball Valve and Process Ball Valve.
Process Ball Valve - Female end
PART NO. SIZE T' D L NPT(F)
PBV-PR-S-4FF 1/4" 1/4" 1.06 2.17 PBV-PR-S-6FF 3/8" 3/8" 1.18 2.28 PBV-PR-S-8FF 1/2" 1/2" 1.38 2.68 PBV-PR-S-12FF 3/4" 3/4" 1.61 2.99 PBV-PR-S-16FF 1" 1" 1.89 3.35
Process Ball Valve - Tube end
PART NO. SIZE T' D L Tube OD
PBV-PR-S-4TT 1/4" 1/4" 1.18 3.19PBV-PR-S-6TT 3/8" 3/8" 1.18 3.35PBV-PR-S-8TT 1/2" 1/2" 1.26 3.54
Features:
! Two and three piece compact design. Reduced or full bore for maximum flow.
! Powder coated single piece handle with stopper, provided with protective PVC sleeve.
! Blow out proof bottom loaded stem.
! Working pressure upto 1000psi/70bar at 100 °F /37°C
! Series of end connections ¼”, 3/8”, 1/2” double or single ferrule tube end or male/female NPT, BSP pipe end.
! Material of construction: SS, M.S, Monel, Brass, Aluminum, Titanium, and Hastalloy.
! 100% factory tested.
Process Ball Valve:
NOTE : Processed Ball Valves - are also available in various end connections
DØT
L
L
DØ T
Ball Valve صمامات كرویة
CD
H
Fx
E T
GE T
DC
HA
H
A
Fx
G
G
B
Hx
H
A
CD
E T
G
F
30
Features:
! 2 way ON-OFF valve, 3 way and 5 way switching valve and 4 way cross over valve models are made.
! One-piece ball stem eliminates backlash to ensure alignment of ball and orifice.
! Blow out proof bottom loaded stem.
! Heavy directional black unbreakable handle
! Panel mounting facility and low operating torque
! Series of end connections ¼”, 3/8”, 1/2” double or single ferrule tube end or male/female NPT, BSP pipe end.
! Pressure rating up to 3000 psi/210 bar at 100°F / 37° C.
! Material of construction: SS, M.S, Monel, Brass, Aluminum, Titanium, and Hastalloy.
! 100% factory tested.
2 Way Ball Valve 3 Way Ball Valve 5 Way Ball Valve
NOTE : Instrument Ball Valves - are also available in various sizes and end connectionsAll Dimensions are for refeerence only and subject to change.
Instrument Ball Valve:
30
Instrumentation & Controls Co. Ltd.Instrumentation & Controls Co. Ltd.
E T
A
CDB
H
F
G
E T
G
CD
B
Hx
H
F
Hx
G
H
E T
CD
F
31
Blue Black
31
Two valve manifold, Remote mounting type. One isolation and one drain valve Threaded on Instrument, Process (1/2”NPTF) and Drain Port (1/4”NPTF)
Note : Various custom made manifolds with different types and sizes of end connections are made on request.All Dimension are for reference only and are subject to change.
MANIFOLD VALVE
‘ICCL’ make manifold valves are installed to control, measure, isolate, equalize, calibrate, drain, vent or differentiate the pressure of liquids and gases. They are manufactured to precise dimensional tolerance to ensure perfect installation and application. We offer 2,3,5 valve manifold configuring remote mounting type (pipe to pipe), direct mounting type (pipe to flange 'T' type and flange to flange 'H' type) or panel mounting type on to gauges, DP transmitter and pressure switches with 2 1/8” (54mm) center.
Two Valve Manifold - R Type
64
ISOLA
TION
VALVE
DR
AIN
VA
LV
E
Instrument 12" NPT(F)
Process 12" NPT(F)
Drain 14" NPT(F)
54
32
DR
AIN
VA
LV
E
ISOLATION VALVE
Manifold Valve
30-31
Note : Various custom made manifolds with different types and sizes of end connections are made on request.All Dimension are for reference only and are subject to change.
Two valve manifold, Direct mounting type. One isolation and one drain valve Threaded on Process side (1/2”NPTF), Instrument side can be mounted directly on static pressure transmitter and Drain Port (1/4”NPTF), supplied with two 7/16”bolt and Teflon seal
Three valve manifold, Remote mounting type. Two isolation valve and one equalizer valve Threaded on both Instrument & Process side (1/2”NPTF) two mounting holes are provided for 1/4”bolts used with DP gauges, Pressure transmitters and Pressure switches
Three Valve Manifold - R Type
32
88
=54=
64
27
=27=
7Ø x 2
ISO
LA
TIO
NV
ALV
E
EQUALI
SERVALV
E
ISO
LA
TIO
NV
ALV
E
EQUALISER VALVE
ISO
LA
TIO
NV
ALV
E
ISO
LA
TIO
NV
ALV
E
INSTRUMENT SIDE-1/2"NPT(F)
PROCESS SIDE-1/2"NPT(F)d/p
Two Valve Manifold - T Type
ISO
LA
TIO
NV
ALV
E
ISOLA
TION
VALVE
Instrument side - Flange
Drain 14" NPT(F)
45
Process side-1/2"NPT(F)
71
20
41.360
30
DRAIN
VALVE
DR
AIN
VA
LV
E
CD
H
Fx
E T
GE T
DC
HA
H
A
Fx
G
G
B
Hx
H
A
CD
E T
G
F
32
Blue Black
32
Instrumentation & Controls Co. Ltd.Instrumentation & Controls Co. Ltd.
E T
A
CDB
H
F
G
E T
G
CD
B
Hx
H
F
Hx
G
H
E T
CD
F
Blue Black
33
Three valve manifold, Direct mounting type. Two isolation valve and one equalizer valve Threaded on Instrument side (1/2”NPTF) & Flanged on Process side. Can be mounted directly on DP gauges, Pressure transmitters and Pressure switches having 54mm c/c connection with centre line bolting, supplied with 4 bolts-7/16” and two Teflon seal
Three Valve Manifold - T Type
Three Valve Manifold - H Type
=54=88
Instrument side Flange
Process side 1/2"NPT
EQUALI
SERVALV
E
ISO
LA
TIO
NV
ALV
E
ISO
LA
TIO
NV
ALV
E
12Ø
ISO
LA
TIO
NV
ALV
E
ISO
LA
TIO
NV
ALV
E
EQUALISER VAVLE
d/p
8854
ISO
LA
TIO
NV
ALV
E
ISO
LA
TIO
NV
ALV
EEQUALI
SERVALV
E
Process side Flange
Instrument side Flange
12Ø
EQUALISER VAVLE
ISO
LA
TIO
NV
ALV
E
ISO
LA
TIO
NV
ALV
E
d/p
Note : Various custom made manifolds with different types and sizes of end connections are made on request.All Dimensions are for reference only and subject to change.
Three valve manifold, Direct mounting type. Two isolation valve and one equalizer valve Flanged on both Process and Instrument side. Can be mounted directly on DP gauges, Pressure transmitters and Pressure switches having 54mm c/c connection with centre line bolting, supplied with 4 bolts-7/16” and two Teflon seal also can be mounted with oval flange to connect the process line with ½”pipe or tubing connections
71
41.360
20
28.5
ISOLA
TION
VALVE
95
60
10
20
41.3
ISOLA
TION
VALVE
33
CD
H
Fx
E T
GE T
DC
HA
H
A
Fx
G
G
B
Hx
H
A
CD
E T
G
F
34
34
Three valve manifold, Direct mounting type. Two isolation valve and one equalizer valve Threaded on Process side and flanged at Instrument side. This Co-planer valve can be mounted directly on DP gauges, Pressure transmitters and Pressure switches having 54mm c/c connection with centre line bolting, supplied with 4 bolts-7/16” and two Teflon seal also can be mounted with oval flange to connect the process line with ½”pipe or tubing connections
Three Valve Manifold - Coplaner Type
Five Valve Manifold - R Type
ISO
LA
TIO
NV
AL
VE
EQUALISER VALVE
Process 12" NPT(F)
Instrument Flange
91 34
69
EQUALI
SERVALV
EE
QU
AL
ISE
RV
AL
VE
90
25
INSTRUMENT SIDE-1/2"NPT(F)
=54=PROCESS SIDE-1/2"NPT(F)
7ØX2
54105
INST. DRAIN
=18=15
INST. DRAIN
ISO
LA
TIO
NV
AL
VEIS
OL
AT
ION
VA
LV
E
DRAIN VALVE DRAIN VALVE
EQUALISER VALVE
1/2"NPT1/2"NPT
32
EQUALISER VALVE
DRAIN VALVE DRAIN VALVE
ISO
LA
TIO
NV
AL
VE
ISO
LA
TIO
NV
ALV
E
Five valve manifold, Remote mounting type. Two isolation valve and one equalizer valve and two Drain valve. Threaded on all Instrument, Process and drain side (1/2”NPTF) two mounting holes are provided for 1/4”bolts used with DP gauges, Pressure transmitters and Pressure switches
Note : Sizes & various combinations other than mentioned above are made on request.All Dimension are for reference only and are subject to change.
Instrumentation & Controls Co. Ltd.Instrumentation & Controls Co. Ltd.
E T
A
CDB
H
F
G
E T
G
CD
B
Hx
H
F
Hx
G
H
E T
CD
F
35
35
Five valve manifold, Direct mounting type. Two isolation valve, one equalizer valve and two drain. Threaded on Instrument side (1/2”NPTF), Flanged on Process side and bleeder plug on drain side. This co-planer valve can be mounted directly on DP gauges, Pressure transmitters and Pressure switches having 54mm c/c connection with centre line bolting, supplied with 4 bolts-7/16” and two Teflon seal
Five valve manifold, Direct mounting type. Two isolation valve, one equalizer valve and two drain valves. Threaded on Instrument side (1/2”NPTF), Flanged on Process side and threaded on drain side (¼”NPTF). Can be mounted directly on DP gauges, Pressure transmitters and Pressure switches having 54mm c/c connection with centre line bolting, supplied with 4 bolts-7/16” and two Teflon seal
90
100
Process side- 1/2"NPT(F)=54=
54
1/4"NPTINST. DRAIN INST. DRAIN
1/4"NPT
Instrument side - Flange end
ISO
LA
TIO
NV
ALV
EISO
LA
TIO
NV
AL
VE
EQUALISER VALVE
DRAIN VALVE DRAIN VALVE
ISO
LA
TIO
NV
ALV
E
ISO
LA
TIO
NV
ALV
E
DRAIN VALVEDRAIN VALVE
EQUALISER VALVE
10
41.3
EQ
UA
LIS
ER
VA
LV
E
ISO
LATIO
NVALV
E
DR
AIN
VA
LV
E
ISOLATIO
NVALVE ISOLATION
VALVE
EQUALISER VALVE
34120
62
Flange
Process 12" NPT(F)
Drain Bleed Plug
Five Valve Manifold - T Type
Five Valve Manifold - Coplaner Type
Note : Sizes & various combinations other than mentioned above are made on request.All Dimension are for reference only and are subject to change.
CD
H
Fx
E T
GE T
DC
HA
H
A
Fx
G
G
B
Hx
H
A
CD
E T
G
F
36
Blue Black
Check Valve / Non-return Valves:
Non-return valves or check valves are made to precision of bubble free close. Heavy-duty corrosion resistance springs are used for longer life. End connection- 1/8” to 1” Male or Female threaded ends or double compression tube end.
Material of construction: Brass, Stainless steel, Carbon steel, SS alloys and Aluminum. Pressure rating up to 6000 PSI.
36
Bleeder Plug Snubber Oval Flange
OTHER ITEMS
Accessories
Inspection and testing facilities available as per BS 4368 Part IV
Hydraulic Pressure Testing: We have the pneumatic to hydraulic booster pump which can test the pressure upto 10000 psi.
Pneumatic Pressure Testing Valves and fitting can be tested up to 150 psi/(10 bar) pressure on compressor and up to 2000 psi on nitrogen cylinder.
Hydraulic Impulse Testing : This test is performed to determine the ability of the fitting assembly to resist severe and sudden pressure impulse without failure. The fitting assembly is subjected to pressure cycle of 0 - 3000 - 0 psi (210 bar)at variable time cycle at 30-40 cycles per minute.
Vibration Testing : The fitting assembly is subjected to vibration of the frequency 23-40 hz. and the amplitude of 3mm to 5mm. Under constant or variable pressure
Temperature cycle Testing : The fitting assembly loop is subjected to temperature cycle of 0 - 250 °C - 0 and then subjected to hydraulic pressure test which test the leakage under thermal shocks.
Inspection Gauges : We have all Go- No Go ring and plug thread gauges; bore gauges and all necessary measuring gauges required controlling quality and consistency of the products
TESTING FACILITIES
Pressure Gauge Accessories :
Instrumentation & Controls Co. Ltd.Instrumentation & Controls Co. Ltd.
M a n u f a c t u r e r s • E x p o r t e r s
Instrumentation & Controls Co. Ltd.Instrumentation & Instrumentation & Instrumentation & Instrumentation & Controls Co. Ltd.Controls Co. Ltd.Controls Co. Ltd.Controls Co. Ltd.
Pioneer ISO 9001-2015 Certified Engineering Company of Saudi Arabia
Contact :
MOHMMED AL-HAJRI • Cell :+966 559896688
NIKHIL PARIKH • Cell : +966 550503905
NIMISH PARIKH • Cell : +966 550503905
Registration & Approvals : • SAUDI ARAMCO (10049428/ 30008943) • SABIC (506447)• MARAFIQ (3643) • SAUDI ELECTRIC CO. (2005393) • SWCC (3678) • PETRORABIG (102655/910564) • SIPCHEM (102756) • SAMSUNG • HYUNDAI • DAEWOOD
Lot #56,Block #02, Section G, Support Industries Jubail-2Kingdom of Saudi Arabia P.O. Box No. 11300 Jubail - 31961