Download - Coursera- Week2- Editing Basics
-
7/29/2019 Coursera- Week2- Editing Basics
1/11
COURSERA - INTRODUCTION TO MUSIC PRODUCTION
Basics editing skills
On Reaper
18/03/2013
Here we are covering this aspects: Trim, separate, crossfade, merge, grid,cycle, markers, zoom, name and color.
-
7/29/2019 Coursera- Week2- Editing Basics
2/11
Introduction to Music Production
2
Trimming
1. When you have an audio file just point its edges with your mouse cursor.
2. Now, click and drag it in order to change its length. In the example below we have edged our
track by the end.
-
7/29/2019 Coursera- Week2- Editing Basics
3/11
Introduction to Music Production
3
Separate
1. Select a portion of your track by clicking and dragging your mouse.
2. Click with your right button and select "Split items at time selection".
-
7/29/2019 Coursera- Week2- Editing Basics
4/11
Introduction to Music Production
4
3. Now you have a track's portion. You could fix it to another track by dragging it, as shown
below.
Crossfade
1. Place your mouse cursor on the top left/right hand corner. The crossfade icon must be
shown on the screen.
-
7/29/2019 Coursera- Week2- Editing Basics
5/11
Introduction to Music Production
5
2. Click on it and drag it in order to fix crossfade's duration and level. Crossfading the beginning
and the end of your track will make smoother transitions.
Grid on/off
1. On the top left hand corner you could see 14 quick-access options, just above track settings.
Click on the fifth icon in the second row to enable or disable the grid. This tool will help you onsetting your track in the timeline.
-
7/29/2019 Coursera- Week2- Editing Basics
6/11
Introduction to Music Production
6
Cycle
1. Make a time selection as we did before and look for the toggle repeat icon just next to the
record button (the red one). This way, you should listen your selection repeated over and over
as it reaches its end.
Zoom in/out
1. On the top bar click on "view" ---> "zoom"------> "zoom in" or "zoom out". In addition, their
shortcuts are shown.
-
7/29/2019 Coursera- Week2- Editing Basics
7/11
Introduction to Music Production
7
Name
1. By naming your tracks you will keep organized and clean your audio files. A handy way of do
it consists on double-click track's dialogue window.
Track Color1. Right-click on your track settings ----> "Track color"----> "Set tracks to custom color...", etc. It
helps you to have a more intuitive track list.
-
7/29/2019 Coursera- Week2- Editing Basics
8/11
Introduction to Music Production
8
Markers
1. Place your mouse cursor on the timeline, then right-click and choose "Insert marker...".
-
7/29/2019 Coursera- Week2- Editing Basics
9/11
Introduction to Music Production
9
2. Name it and set a color if you like. We name the example's marker as "Chorus" in order to
have indicated where it begins.
3. Here you have.
-
7/29/2019 Coursera- Week2- Editing Basics
10/11
Introduction to Music Production
10
Merge
1. At first you should several pieces of the audio track. Then place them properly. As you can
see we have in our example 4 pieces of the track (paying attention to the highlighted selection
should give you a clue about where the joints are).
2. Now double-click on track settings (grey rectangle on the left of the picture) in order toactive it as a whole selection. Next step is right-click and choose the "Glue items" option. After
that you will find all pieces merged in one track.
-
7/29/2019 Coursera- Week2- Editing Basics
11/11
Introduction to Music Production
11
Final notes
Until these lines we have covered some basic skills on editing audio files in a DAW, for
instance Reaper.
I hope you find this document useful as its development has been for me.
Thank you for your time!
You could download and get more info about Reaper here:
http://www.reaper.fm/
Visit Coursera here:
https://www.coursera.org/
http://www.reaper.fm/http://www.reaper.fm/https://www.coursera.org/https://www.coursera.org/https://www.coursera.org/http://www.reaper.fm/