Download - Cutting Machines
![Page 1: Cutting Machines](https://reader036.vdocument.in/reader036/viewer/2022081505/568163b9550346895dd4d06e/html5/thumbnails/1.jpg)
Cutting MachinesFoldable Information
![Page 2: Cutting Machines](https://reader036.vdocument.in/reader036/viewer/2022081505/568163b9550346895dd4d06e/html5/thumbnails/2.jpg)
DRILL PRESS
Related Terms
Center punch
Cutting Oil
![Page 3: Cutting Machines](https://reader036.vdocument.in/reader036/viewer/2022081505/568163b9550346895dd4d06e/html5/thumbnails/3.jpg)
DRILL PRESS
Use
Used to drill holes into or through a piece of metal.
![Page 4: Cutting Machines](https://reader036.vdocument.in/reader036/viewer/2022081505/568163b9550346895dd4d06e/html5/thumbnails/4.jpg)
DRILL PRESS
Safety Rules
Secure metal to the table using a clamp.
Remove key from chuck after bit is tight.
Place long end of metal on the left side of the column.
If the piece starts to spin keep the bit held down and turn the machine off.
![Page 5: Cutting Machines](https://reader036.vdocument.in/reader036/viewer/2022081505/568163b9550346895dd4d06e/html5/thumbnails/5.jpg)
METAL CUTTING BAND SAW
Related Terms
Horizontal Cutting
Vertical Cutting
Blade Guide
![Page 6: Cutting Machines](https://reader036.vdocument.in/reader036/viewer/2022081505/568163b9550346895dd4d06e/html5/thumbnails/6.jpg)
METAL CUTTING BAND SAW
Uses
Used to make straight or slightly curved cuts into metal.
![Page 7: Cutting Machines](https://reader036.vdocument.in/reader036/viewer/2022081505/568163b9550346895dd4d06e/html5/thumbnails/7.jpg)
METAL CUTTING BAND SAW
Safety Rules When using the band saw in the horizontal
position make sure to securely clamp the material.
When using the band saw in the vertical position make sure the table is screwed into position.
Do not force the blade into the cut. Let the machine do the work.
![Page 8: Cutting Machines](https://reader036.vdocument.in/reader036/viewer/2022081505/568163b9550346895dd4d06e/html5/thumbnails/8.jpg)
METAL LATHE
Related Terms
Facing
Turning
Cross Feed
Compound Feed
![Page 9: Cutting Machines](https://reader036.vdocument.in/reader036/viewer/2022081505/568163b9550346895dd4d06e/html5/thumbnails/9.jpg)
METAL LATHE
Uses
Used to turn a cylindrical object down to a smaller diameter.
Used to face the end of a piece to make it flat.
Used to cut threads.
![Page 10: Cutting Machines](https://reader036.vdocument.in/reader036/viewer/2022081505/568163b9550346895dd4d06e/html5/thumbnails/10.jpg)
METAL LATHE
Safety Rules
Turn the machine by hand before turning it on.
Secure the material in the chuck then remove the key.
Keep hands clear of moving parts.
Do not stand in front of the chuck when turning on the machine.
![Page 11: Cutting Machines](https://reader036.vdocument.in/reader036/viewer/2022081505/568163b9550346895dd4d06e/html5/thumbnails/11.jpg)
ABRASIVE SAW
Related Terms
Ferrous Metal
![Page 12: Cutting Machines](https://reader036.vdocument.in/reader036/viewer/2022081505/568163b9550346895dd4d06e/html5/thumbnails/12.jpg)
ABRASIVE SAW
Use
Used to quickly cut ferrous tubing to length.
![Page 13: Cutting Machines](https://reader036.vdocument.in/reader036/viewer/2022081505/568163b9550346895dd4d06e/html5/thumbnails/13.jpg)
ABRASIVE SAW
Safety Rules Stand off to the side of the blade before
pulling the power switch.
Make sure the piece is tight in the clamp before cutting.
Pull the saw slowly through the metal.
Used to cut ferrous metals only.
![Page 14: Cutting Machines](https://reader036.vdocument.in/reader036/viewer/2022081505/568163b9550346895dd4d06e/html5/thumbnails/14.jpg)
BENCH GRINDER
Related Terms
Tool Rest
Spark arrestor
Wheel dresser
![Page 15: Cutting Machines](https://reader036.vdocument.in/reader036/viewer/2022081505/568163b9550346895dd4d06e/html5/thumbnails/15.jpg)
BENCH GRINDER
Uses
Used to sharpen tools
Used to shape metal
![Page 16: Cutting Machines](https://reader036.vdocument.in/reader036/viewer/2022081505/568163b9550346895dd4d06e/html5/thumbnails/16.jpg)
BENCH GRINDERSafety Rules
Keep tool rest about 1/8” away from wheel.
Check wheel for cracks before turning on the machine.
Keep spark arrestor and face shields in place.
Used to grind ferrous metal only.
Use wheel dresser as necessary to keep wheel true.
![Page 17: Cutting Machines](https://reader036.vdocument.in/reader036/viewer/2022081505/568163b9550346895dd4d06e/html5/thumbnails/17.jpg)
ANGLE GRINDER
Related Terms
Direction of sparks
Location of power cord
![Page 18: Cutting Machines](https://reader036.vdocument.in/reader036/viewer/2022081505/568163b9550346895dd4d06e/html5/thumbnails/18.jpg)
ANGLE GRINDER
Uses
Used to sharpen tools or shape metal.
![Page 19: Cutting Machines](https://reader036.vdocument.in/reader036/viewer/2022081505/568163b9550346895dd4d06e/html5/thumbnails/19.jpg)
ANGLE GRINDER
Safety Rules Never aim sparks in the direction of people or
flammable materials.
Keep the disc moving on top of the metal. Never hold it in 1 spot.
Do not use the edge of the grinding wheel to grind with.
![Page 20: Cutting Machines](https://reader036.vdocument.in/reader036/viewer/2022081505/568163b9550346895dd4d06e/html5/thumbnails/20.jpg)
DISC SANDER
Related Terms
Disc Rotation
Adhesive backed disc
![Page 21: Cutting Machines](https://reader036.vdocument.in/reader036/viewer/2022081505/568163b9550346895dd4d06e/html5/thumbnails/21.jpg)
DISC SANDER
Uses
Used to give metal its final shape.
Removes rust or scale
Preps metal for welding.
![Page 22: Cutting Machines](https://reader036.vdocument.in/reader036/viewer/2022081505/568163b9550346895dd4d06e/html5/thumbnails/22.jpg)
DISC SANDER
Safety Rules Keep table about 1/8” from the disc.
Keep metal being sanded flat on the table.
Sand only on the downward rotating side of the disc.
After being shut off the disc can be slowed to a stop with a piece of scrap wood pressed against its outer edge.