Download - CVD - PKD / CVD - PCD / PCBN
CVD, PKD, CBN - bestückte Vollhartmetall Bohrstangen mit Spannfl äche, Produktübersicht
CVD, PCD, CBN - brazed carbide boring bars with clamping surface, product overview
Bohrstangen - boring bareCVD - PKD / CVD - PCD / PCBN
GSTMEWMY
Einsatzgebiete / Application range:
Aluminium Knetlegierung / Aluminium alloys SiKupfer-Messing Legierungen / Copper-Brass Alloys
Graphit / GraphiteGFK-CFK / Glass-Carbon fi bre reinforced
Gehärteter Stahl 42 - 72 HRC / Hardened steel 42 – 72 HRCSinterstahl / Sinter steel
Grauguss / Grey Cast IronSuperalloys
Diamond Tooling SystemsDTS GmbH - Deutschland DTS GmbH - Deutschland www.diamond-toolingsystems.com
2 3
Diamond Tooling SystemsDTS GmbH
Diamond Tooling SystemsDTS GmbH
Diamond Tooling Systems GmbH / Diamond Tooling Systems GmbH Inhaltsverzeichnis / Content
Mit Sitz in Kaiserslautern-Deutschland haben wir uns auf die Entwicklung, Herstellung und den Vertrieb von Präzisionswerk-zeugen aus ultraharten Schneidstoffen wie CVD-D (CVD-Dickfilm Diamant), PKD (Polykristalliner Diamant) und PCBN (Kubisches Bornitrid) spezialisiert und national so wie international erfolgreich am Markt etabliert.
Um diese ultraharten Schneidstoffe wie PKD, PCBN und den CVD-Dickfilm Diamant auf Präzisionwerkzeugen wirtschaftlich be-arbeiten zu können haben wir schon früh erkannt, dass wir uns von der alten Produktionstechnologie „Schleifen“ hin zu neuen Tech-nologien wie der „Lasertechnologie“ weiterentwickeln müssen.
Ultraharte Hochleistungsschneidstoffe haben eine Schlüsselfunk-tion in der spanenden Fertigung. Präzisionswerkzeuge aus ultraharten Schneidstoffen sind sehr erklärungsbedürftige Produkte. Der wirtschaftliche Einsatz der Schneidstoffe ist nur sichergestellt, wenn der Zerspanungspro-zess und der Schneidstoff aufeinander abgestimmt sind.
Genau hier setzt Diamond Tooling Systems GmbH an, „Unse-re Kernkompetenz sind Präzisionswerkzeuge aus ultraharten Schneidstoffen“. Diese Hightech-Werkzeuge müssen zum Zerspa-nungsprozess mit Anwendungstechnikern genau abgestimmt wer-den, nur so ist es möglich, das optimale Potenzial auszuschöpfen.
Mit mehr als 25 Jahren Optimierungserfahrung in der verarbeiten-den Industrie sehen wir hier unsere Stärke! Während der laufen-den Produktion stehen wir Ihnen mit unseren erfahrenen Anwen-dungstechnikern beratend zur Seite. Diese enge Zusammenarbeit und das gegenseitige Vertrauen ist die Basis unseres Erfolges.
Located in Kaiserslautern, Germany we are specialized on the development, the production and the sales of precision tools from ultra hard cutting materials such as CVD-D (CVD thick film diamond), PCD (polycrystalline diamond) and PCBN (cubic boron nitride) and have established those successfully on the national and international market.
To be able to economically process these ultra hard cutting mate-rials such as PCD, PCBN and CVD thick film diamond onto preci-sion tools we had already noticed in the early stages that we had to move away from the old manufacturing technology „grinding“ and had to advance to new technologies such as the „Laser tech-nology“. Ultra hard high-performance cutting materials have a key function in the metal cutting production.
Precision tools from ultra hard cutting materials are products which require a large need of explanation. The economical usage of the-se cutting materials is only guaranteed if the cutting process and the cutting materials are aligned with each other. Exactly here „Diamond Tooling Systems GmbH“ comes into the picture. Our main competence are the precision tools made from ultra hard cutting materials. These high tech tools have to be aligned exactly with the cutting process together with an experi-enced application engineer, only then is it possible to exploit the optimal potential.
With more than 25 years of optimization experience in the produ-cing industry we see our strength!During the running production we stand consulting by your side together with our experienced application engineers. This close cooperation on a mutual trust basis is the basis for our success.
Einsatzgebiete von PKD / CVD Dickfilm Diamant, CBN 3
Schneidstoffgruppen 4
PKD/PCD - CVD - CBN Diamant bestückte Vollhartmetall Bohrstangen mit Spannfläche 6 - 11
Spannadapter ohne IK 4 - 8 mm 12 - 13
Spannadapter mit IK 4 - 8 mm 14 - 15
The application range of PCD / CVDThickfilm Diamond, CBN 3
Groups of Cuttingmaterial 4
PKD/PCD - CVD - CBN Diamond brazed carbi-de boring bar with clamping surface 6 - 11
Adapter Sleeve without coolant 4 - 8 mm 12 - 13
Adapter Sleeve with inner coolant 4 - 8 mm 14 - 15
Einsatzgebiete von PKD / CVD Dickfilm Diamant
The application range of PCD / CVD Thickfilm Diamond
Einsatzgebiete von CBN The application range of CBN
Aluminium, Aluminium-Verbundstoffe Magnesium, WolframHartmetall, KeramikKupfer/Messing, NE-MetalleCFK/GFK und GraphitKunststoffe mit GlasfaserFaser-Verbundstoffe Titan
Gehärtete Schnellarbeitsstähle (HSS)Hochlegierte Werkzeugstähle mit min. 42 HRCEinsatzgehärtete StählePulverbeschichtungen auf EisenbasisHartguss, GraugussWeiche Stahlqualitäten in bestimmten AnwendungsfällenStellite, Nickelbasierte SuperlegierungenHartmetall
Aluminum, Aluminum compositesMagnesium, Tungsten, Carbide, CeramicCopper / Brass alloysCarbon fiber reinforced plastic, GraphitePlastics with glass fiber Fiber composites Titanium
Hardened high speed steel (HSS)High-alloy tool steels with min. 42 HRCCase-hardened steelsPowder coatings based on ironHard cast, sintered ironSoft steel grades in certain applicationsStellite, nickel-based superalloysCarbide
4 5
Diamond Tooling SystemsDTS GmbH
Diamond Tooling SystemsDTS GmbH
Schneidstoffgruppen / Groups of Cuttingmaterial Notizen / Notice
0
1000
2000
3000
4000
5000
6000
7000
8000
9000
10000
CVD
-Thi
ckfi
lm D
iam
ond
NaturdiamantNatural DiamondDiamant NaturelDiament naturalny
PKDPCDPCDPKD
PCBNPCBNPCBN
Borazon
MKDMCDMCDMKD
KeramikCeramicCeramiqueCeramika
HartmetallCarbideCarbureWęglik spiekany
StahlSteelAcier HSSStal
Härte / Hardness / Dureté / Twardość (Knoop kg/mm2)
min.
StreubereichHardness scatteringDispersion de duretéRozproszenie twardości
CVD Dickfi lm Diamant – der härteste Schneidstoff der Welt!
Der ultraharte Schneidstoff „CVD-Dickfi lm Diamant“ besitzt die höchste Härte und den höchsten Verschleißwiderstand aller un-tersuchten Schneidstoff e.Der „PKD Schneidstoff “ hat im Gegensatz zum „CVD-Dickfi lm Diamant“ deutliche Nachteile aufgrund seiner weichen metallischen Bindephase. In zahlreichen Versuchen konnte nachgewiesen wer-den, dass vor allem die weiche Bindephase des PKD durch die abrasiven Partikel geschädigt wird. Die Folge ist ein Ausbrechen der Diamantkristalle aufgrund einer verminderten Verankerung in der Schneidstoff matrix.Bei richtigem Einsatz von CVD-Dickfi lm Diamant können die Stand-zeiten gegenüber PKD um das 3-10fache erhöht werden!
CVD Thickfi lm Diamond the hardest cutting material of the world!
The mostly used “PCD cutting material” has in comparison to the “CVD-thickfi lm diamond” clear drawbacks due to its soft metallic binder. In several tests it has been proven that especially the soft binder of the PCD is damaged through abrasive particles. The consequence is a break out of the diamond crystals due to a reduced anchorage in the cutting material matrix. The consequence of this is that by the machining of aluminum – and magnesium alloys and also non ferrous materials preferably diamond is used as cutting material. The clean diamond segments, which in most cases are brazed onto a carbide insert. The tool life can be increased with CVD thickfi lm diamond approx 3 to 10 times vs. PCD.
PKDPCD CVD CBN CBN
ArtikelnummerArticle
ArtikelnummerArticle
ArtikelnummerArticle
ArtikelnummerArticle
Rechts / Right BS1050-0000 BS2050-0000 BS3550-0000 1,00 0,50 4,00 80,00 0,10 4,00Links / Left BS1050-0001 BS2050-0001 BS3550-0001 1,00 0,50 4,00 80,00 0,10 4,00
dmin. f l2 l1 r dh6
Rechts / Right BS1050-0005 BS2050-0005 BS3550-0005 1,50 0,75 6,00 80,00 0,10 4,00Links / Left BS1050-0006 BS2050-0006 BS3550-0006 1,50 0,75 6,00 80,00 0,10 4,00
Rechts / Right BS1050-0010 BS2050-0010 BS3550-0010 2,00 1,00 10,00 80,00 0,10 4,00Links / Left BS1050-0011 BS2050-0011 BS3550-0011 2,00 1,00 10,00 80,00 0,10 4,00
Rechts / Right BS1050-0020 BS2050-0020 BS3550-0020 2,50 1,25 10,00 80,00 0,10 4,00Links / Left BS1050-0021 BS2050-0021 BS3550-0021 2,50 1,25 10,00 80,00 0,10 4,00
Rechts / Right BS1050-0030 BS2050-0030 BS3550-0030 3,00 1,50 10,00 80,00 0,10 4,00Links / Left BS1050-0031 BS2050-0031 BS3550-0031 3,00 1,50 10,00 80,00 0,10 4,00
Rechts / Right BS3550-0040 4,00 2,00 12,00 80,00 0,10 4,00Links / Left BS3550-0041 4,00 2,00 12,00 80,00 0,10 4,00
Schnittwert-EmpfehlungCutting Condition
PKDPCD CVD CBN CBN
Schnittwerte - Vc (m/min)Recommended Parameter 20 - 500 20 - 1000 20 - 800Vorschub - f (mm/U)Feed Rate 0,01 - 0,10 0,01 - 0,10 0,01 - 0,10Schnitttiefe - ap (mm)Depth of Cut 0,01 - 0,60 0,01 - 1,20 0,01 - 0,80
6 7
Diamond Tooling SystemsDTS GmbH
Diamond Tooling SystemsDTS GmbH
CVDPKDPCD CBN Diamant bestückte VHM Bohrstange mit Spannfl äche Diamond brazed carbide boring bar with clamping surface
BA7090-0001
BA7090-0001
BA7090-0001
BA7090-0001
BA7090-0001
BA7090-0001
Werkstoff zuordnung
Aluminium Knetlegierungen
untereutektisches Aluminium
Nichteisen Metalle
Aluminium Knetlegierungen
untereutektisches und übereutekti-sches Aluminium
Kunststoff e, Faser-verbundwerkstoff e
CFK u. GFK
Hartdrehen bis 72 HRCGrauguss GG, GGG
SinterstahlHochwarmfeste Stähle
Titanlegierungen
MaterialAssignment
Aluminium alloyswithout Si content
Aluminium alloys up to 12% Si content
Non-ferrous metals
Aluminium alloyswithout Si content
Aluminium alloys up to 12% Si content
Aluminium alloys up to 12-20% Si content
Plastics and Rein-forced Plastics
Carbon Fibre and Glass Reinforced
Plastics
Hard turning to 72 HRCGrey Cast Iron GG, GGG
SintersteelSuperalloysTitan Alloys
Spannadapter, Seite 12 + 14Adapter Sleeve, page 12 + 14
Glatter Schnitt Continuous Cut
unterbrochener Schnitt interrupted Cut
Sonderwerkzeuge gerne auf Anfrage: [email protected]
Special tools on request: [email protected]
l2
dmin
f
dh6
r
l1
95°
Radi
us 0
,10
mm
/ Ra
dius
0,1
0 m
m
PKDPCD CVD CBN CBN
ArtikelnummerArticle
ArtikelnummerArticle
ArtikelnummerArticle
ArtikelnummerArticle
Rechts / Right BS1050-2040 BS2050-2040 BS3550-2040 BS3550-2045 5,00 2,50 12,00 80,00 0,20 4,00Links / Left BS1050-2041 BS2050-2041 BS3550-2041 BS3550-2046 5,00 2,50 12,00 80,00 0,20 4,00
dmin. f l2 l1 r dh6
Rechts / Right BS1050-2050 BS2050-2050 BS3550-2050 BS3550-2055 6,00 3,00 12,00 100,00 0,20 5,00Links / Left BS1050-2051 BS2050-2051 BS3550-2051 BS3550-2056 6,00 3,00 12,00 100,00 0,20 5,00
Rechts / Right BS1050-2060 BS2050-2060 BS3550-2060 BS3550-2065 7,00 3,50 18,00 100,00 0,20 6,00Links / Left BS1050-2061 BS2050-2061 BS3550-2061 BS3550-2066 7,00 3,50 18,00 100,00 0,20 6,00
Rechts / Right BS1050-2080 BS2050-2080 BS3550-2080 BS3550-2085 9,00 4,50 24,00 100,00 0,20 8,00Links / Left BS1050-2081 BS2050-2081 BS3550-2081 BS3550-2086 9,00 4,50 24,00 100,00 0,20 8,00
Rechts / Right BS1050-4040 BS2050-4040 BS3550-4040 BS3550-4045 5,00 2,50 12,00 80,00 0,40 4,00Links / Left BS1050-4041 BS2050-4041 BS3550-4041 BS3550-4046 5,00 2,50 12,00 80,00 0,40 4,00
Rechts / Right BS1050-4050 BS2050-4050 BS3550-4050 BS3550-4055 6,00 3,00 12,00 100,00 0,40 5,00Links / Left BS1050-4051 BS2050-4051 BS3550-4051 BS3550-4056 6,00 3,00 12,00 100,00 0,40 5,00
Rechts / Right BS1050-4060 BS2050-4060 BS3550-4060 BS3550-4065 7,00 3,50 18,00 100,00 0,40 6,00Links / Left BS1050-4061 BS2050-4061 BS3550-4061 BS3550-4066 7,00 3,50 18,00 100,00 0,40 6,00
Rechts / Right BS1050-4080 BS2050-4080 BS3550-4080 BS3550-4085 9,00 4,50 24,00 100,00 0,40 8,00Links / Left BS1050-4081 BS2050-4081 BS3550-4081 BS3550-4086 9,00 4,50 24,00 100,00 0,40 8,00
8 9
Diamond Tooling SystemsDTS GmbH
Diamond Tooling SystemsDTS GmbH
CVD PKDPCD CBN Diamant bestückte VHM Bohrstange mit Spannfl äche Diamond brazed carbide boring bar with clamping surface
BA7090-0001
BA7090-0002
BA7090-0003
BA7090-0004
BA7090-0001
Werkstoff zuordnung
Aluminium Knetlegierungen
untereutektisches Aluminium
Nichteisen Metalle
Aluminium Knetlegierungen
untereutektisches und übereutekti-sches Aluminium
Kunststoff e, Faser-verbundwerkstoff e
CFK u. GFK
Hartdrehen bis 72 HRCGrauguss GG, GGG
SinterstahlHochwarmfeste Stähle
Titanlegierungen
MaterialAssignment
Aluminium alloyswithout Si content
Aluminium alloys up to 12% Si content
Non-ferrous metals
Aluminium alloyswithout Si content
Aluminium alloys up to 12% Si content
Aluminium alloys up to 12-20% Si content
Plastics and Rein-forced Plastics
Carbon Fibre and Glass Reinforced
Plastics
Hard turning to 72 HRCGrey Cast Iron GG, GGG
SintersteelSuperalloysTitan Alloys
BA7090-0002
BA7090-0003
BA7090-0004
Glatter Schnitt Continuous Cut
unterbrochener Schnitt interrupted Cut
Sonderwerkzeuge gerne auf Anfrage: [email protected]
Special tools on request: [email protected]
Radi
us 0
,20
mm
/ Ra
dius
0,2
0 m
mRa
dius
0,4
0 m
m /
Radi
us 0
,40
mm
l2
dmin
f
dh6
l1
r
95°
CVDPKDPCD CBN
Schnittwert-EmpfehlungCutting Condition
PKDPCD CVD CBN CBN
Schnittwerte - Vc (m/min)Recommended Parameter 20 - 600 20 - 1600 20 - 800 20 - 600Vorschub - f (mm/U)Feed Rate 0,01 - 0,20 0,01 - 0,20 0,01 - 0,20 0,01 - 0,20Schnitttiefe - ap (mm)Depth of Cut 0,01 - 1,00 0,01 - 2,00 0,01 - 1,00 0,01 - 0,60
Special tools on request:
0,01 - 0,20
0,01 - 0,60
Special tools on request: [email protected]
20 - 600
Special tools on request:
0,01 - 0,20
0,01 - 0,60
Spannadapter, Seite 12 + 14Adapter Sleeve, page 12 + 14
PKDPCD CVD CBN CBN
ArtikelnummerArticle
ArtikelnummerArticle
ArtikelnummerArticle
ArtikelnummerArticle
Rechts / Right BE2050-2130 BE3550-2130 3,60 1,80 10,00 90,00 0,20 6,00Links / Left BE2050-2131 BE3550-2131 3,60 1,80 10,00 90,00 0,20 6,00
dmin. f l2 l1 r dh6
Rechts / Right BE2050-2030 BE3550-2030 3,60 1,80 18,00 100,00 0,20 6,00Links / Left BE2050-2031 BE3550-2031 3,60 1,80 18,00 100,00 0,20 6,00
Rechts / Right BE2050-4060 BE3550-4060 7,00 3,50 36,00 100,00 0,40 6,00Links / Left BE2050-4061 BE3550-4061 7,00 3,50 36,00 100,00 0,40 6,00
10 11
Diamond Tooling SystemsDTS GmbH
Diamond Tooling SystemsDTS GmbH
CVD PKDPCD CBN Diamant bestückte VHM Bohrstange mit Spannfl äche Diamond brazed carbide boring bar with clamping surface
BA7090-0003
BA7090-0003
BA7090-0003
Werkstoff zuordnung
Aluminium Knetlegierungen
untereutektisches Aluminium
Nichteisen Metalle
Aluminium Knetlegierungen
untereutektisches und übereutekti-sches Aluminium
Kunststoff e, Faser-verbundwerkstoff e
CFK u. GFK
Hartdrehen bis 72 HRCGrauguss GG, GGG
SinterstahlHochwarmfeste Stähle
Titanlegierungen
MaterialAssignment
Aluminium alloyswithout Si content
Aluminium alloys up to 12% Si content
Non-ferrous metals
Aluminium alloyswithout Si content
Aluminium alloys up to 12% Si content
Aluminium alloys up to 12-20% Si content
Plastics and Rein-forced Plastics
Carbon Fibre and Glass Reinforced
Plastics
Hard turning to 72 HRCGrey Cast Iron GG, GGG
SintersteelSuperalloysTitan Alloys
Glatter Schnitt Continuous Cut
unterbrochener Schnitt interrupted Cut
Sonderwerkzeuge gerne auf Anfrage: [email protected]
Special tools on request: [email protected]
R 0,
20R
0,40
l2
dmin
f
dh6
r
l1
40°
CVDPKDPCD CBN
Schnittwert-EmpfehlungCutting Condition
PKDPCD CVD CBN CBN
Schnittwerte - Vc (m/min)Recommended Parameter 20 - 600 20 - 1600 20 - 800 20 - 600Vorschub - f (mm/U)Feed Rate 0,01 - 0,20 0,01 - 0,20 0,01 - 0,20 0,01 - 0,20Schnitttiefe - ap (mm)Depth of Cut 0,01 - 1,00 0,01 - 2,00 0,01 - 1,00 0,01 - 0,60
0,01 - 0,20
0,01 - 0,600,01 - 0,60
Spannadapter, Seite 12 + 14Adapter Sleeve, page 12 + 14
ID- NummerID-Nuber
Bestell BezeichnungOrder Designation
Bohrstange ØBoring Bar Ø d1 d2 d3 l1 l2 l3
ArtikelnummerArticle
BA7090-0001 Spannadapter 4 mmAdapter Sleeve 4 mm 2,00 3,00 4,00 4H6 16H6 20,00 75,00 48,00 64,00
BA7090-0002 Spannadapter 5 mmAdapter Sleeve 5 mm 5,00 5H6 16H6 20,00 85,00 48,00 79,00
BA7090-0003 Spannadapter 6 mmAdapter Sleeve 6 mm 6,00 6H6 16H6 20,00 84,00 48,00 78,00
BA7090-0004 Spannadapter 8 mmAdapter Sleeve 8 mm 8,00 8H6 16H6 20,00 82,00 48,00 77,00
01-BA7090-0010 Schraube M5Screw M5 Für alle Spannadapter / For all Adapter Sleeves
12 13
Diamond Tooling SystemsDTS GmbH
Diamond Tooling SystemsDTS GmbH
Spannadapter / Adapter Sleeve
M5 M5
d2d1d3
l3
l1
l2
ID- NummerID-Nuber
Bestell BezeichnungOrder Designation
Bohrstange ØBoring Bar Ø d1 d2 d3 l1 l2 l3
ArtikelnummerArticle
BA7090-1001 Spannadapter mit innerer Kühlung 4 mmAdapter Sleeve with inner coolant 4 mm 2,00 3,00 4,00 4H6 16H6 20,00 75,00 48,00 64,00
BA7090-1002 Spannadapter mit innerer Kühlung 5 mmAdapter Sleeve with inner coolant 5 mm 5,00 5H6 16H6 20,00 85,00 48,00 79,00
BA7090-1003 Spannadapter mit innerer Kühlung 6 mmAdapter Sleeve with inner coolant 6 mm 6,00 6H6 16H6 20,00 84,00 48,00 78,00
BA7090-1004 Spannadapter mit innerer Kühlung 8 mmAdapter Sleeve with inner coolant 8 mm 8,00 8H6 16H6 20,00 82,00 48,00 77,00
01-BA7090-0010 Schraube M5Screw M5 Für alle Spannadapter / For all Adapter Sleeves
14 15
Diamond Tooling SystemsDTS GmbH
Diamond Tooling SystemsDTS GmbH
Spannadapter mit innerer Kühlung Adapter Sleeve with inner coolant
M5 M5
d2d1d3
l3
l1
l2
Notizen / Notice Notizen / Notice
16 17
Diamond Tooling SystemsDTS GmbH
Diamond Tooling SystemsDTS GmbH
Notizen / Notice Notizen / Notice
18 19
Diamond Tooling SystemsDTS GmbH
Diamond Tooling SystemsDTS GmbH
DTS GmbH - Diamond Tooling SystemsHans-Geiger Straße 11a67661 KaiserslauternDeutschland / Germany
office: +49(0)630132011-0fax: +49(0)630132011-90mail: [email protected] www.diamond-toolingsystems.com