![Page 1: DAGR Receiver Default Settings. GPS Setup Page Page Function Page Fields –Operating Mode –Power-On Operating Mode –Frequency –SV Code –Elevation Hold](https://reader035.vdocument.in/reader035/viewer/2022062303/5516b10c550346f6208b5259/html5/thumbnails/1.jpg)
DAGR Receiver Default Settings
![Page 2: DAGR Receiver Default Settings. GPS Setup Page Page Function Page Fields –Operating Mode –Power-On Operating Mode –Frequency –SV Code –Elevation Hold](https://reader035.vdocument.in/reader035/viewer/2022062303/5516b10c550346f6208b5259/html5/thumbnails/2.jpg)
GPS Setup Page• Page Function• Page Fields
– Operating Mode– Power-On Operating Mode– Frequency– SV Code– Elevation Hold– Receiver Autonomous Integrity Monitor (RAIM) Mode and Status– Rehearsal Route and Ground Speed– Anti-Jam Accessory Mode and Status– Differential Global Position System (DGPS) Mode and Status
(Advanced)– Wide Area GPS Enhancements (WAGE) Mode and Status
(Advanced)– Mask Mode and Angle (Advanced)– SV Hold (Advanced)
![Page 3: DAGR Receiver Default Settings. GPS Setup Page Page Function Page Fields –Operating Mode –Power-On Operating Mode –Frequency –SV Code –Elevation Hold](https://reader035.vdocument.in/reader035/viewer/2022062303/5516b10c550346f6208b5259/html5/thumbnails/3.jpg)
GPS Setup Page
1 From the GPS Setup page, push the ENTER key to highlight a field.
2. Use the cursor control keys to highlight the desired field, then perform one of the following:
(a) To edit field text or numeric content, push the ENTER key. For some fields, field content is chosen from a list and pushing the ENTER key displays the list editor.
![Page 4: DAGR Receiver Default Settings. GPS Setup Page Page Function Page Fields –Operating Mode –Power-On Operating Mode –Frequency –SV Code –Elevation Hold](https://reader035.vdocument.in/reader035/viewer/2022062303/5516b10c550346f6208b5259/html5/thumbnails/4.jpg)
GPS Setup Page
• Operating Mode Field– Continuous
– Fix
– Average
– Time Only
– Standby
– Rehearsal
– Test
– Off
![Page 5: DAGR Receiver Default Settings. GPS Setup Page Page Function Page Fields –Operating Mode –Power-On Operating Mode –Frequency –SV Code –Elevation Hold](https://reader035.vdocument.in/reader035/viewer/2022062303/5516b10c550346f6208b5259/html5/thumbnails/5.jpg)
• Power-On Operating Mode Field– Default– Continuous – Standby– Fix – Average– Time Only– Frequency Field
Selections• L1 Primary • L2 Primary• L1 Only
GPS Setup Page
![Page 6: DAGR Receiver Default Settings. GPS Setup Page Page Function Page Fields –Operating Mode –Power-On Operating Mode –Frequency –SV Code –Elevation Hold](https://reader035.vdocument.in/reader035/viewer/2022062303/5516b10c550346f6208b5259/html5/thumbnails/6.jpg)
• Frequency Field Default– L1 Primary
– L2 Primary
– L1 Only
GPS Setup Page
![Page 7: DAGR Receiver Default Settings. GPS Setup Page Page Function Page Fields –Operating Mode –Power-On Operating Mode –Frequency –SV Code –Elevation Hold](https://reader035.vdocument.in/reader035/viewer/2022062303/5516b10c550346f6208b5259/html5/thumbnails/7.jpg)
• SV Code Field– All-Y
– Mixed
• Note– Mixed Susceptible to
spoofing signals
GPS Setup Page
![Page 8: DAGR Receiver Default Settings. GPS Setup Page Page Function Page Fields –Operating Mode –Power-On Operating Mode –Frequency –SV Code –Elevation Hold](https://reader035.vdocument.in/reader035/viewer/2022062303/5516b10c550346f6208b5259/html5/thumbnails/8.jpg)
GPS Setup Page
• Elevation Hold Field– Automatic
– Manual
![Page 9: DAGR Receiver Default Settings. GPS Setup Page Page Function Page Fields –Operating Mode –Power-On Operating Mode –Frequency –SV Code –Elevation Hold](https://reader035.vdocument.in/reader035/viewer/2022062303/5516b10c550346f6208b5259/html5/thumbnails/9.jpg)
GPS Setup Page
• RAIM Mode Field• RAIM Status Field
– Unavailable
– No Faults
– Faults Found
![Page 10: DAGR Receiver Default Settings. GPS Setup Page Page Function Page Fields –Operating Mode –Power-On Operating Mode –Frequency –SV Code –Elevation Hold](https://reader035.vdocument.in/reader035/viewer/2022062303/5516b10c550346f6208b5259/html5/thumbnails/10.jpg)
GPS Setup Page
• Rehearsal Route Field• Rehearsal Ground
Speed Field
![Page 11: DAGR Receiver Default Settings. GPS Setup Page Page Function Page Fields –Operating Mode –Power-On Operating Mode –Frequency –SV Code –Elevation Hold](https://reader035.vdocument.in/reader035/viewer/2022062303/5516b10c550346f6208b5259/html5/thumbnails/11.jpg)
• Anti-Jam Mode Field• Anti-Jam Accessory
Status Field– Not Connected
– Off
– Pass Through (Normal)
– Nulling
– Test In Progress
– Self-Test Failed
GPS Setup Page
![Page 12: DAGR Receiver Default Settings. GPS Setup Page Page Function Page Fields –Operating Mode –Power-On Operating Mode –Frequency –SV Code –Elevation Hold](https://reader035.vdocument.in/reader035/viewer/2022062303/5516b10c550346f6208b5259/html5/thumbnails/12.jpg)
• Mask Mode Field (Advanced)
• Mask Angle Field (Advanced)
GPS Setup Page
![Page 13: DAGR Receiver Default Settings. GPS Setup Page Page Function Page Fields –Operating Mode –Power-On Operating Mode –Frequency –SV Code –Elevation Hold](https://reader035.vdocument.in/reader035/viewer/2022062303/5516b10c550346f6208b5259/html5/thumbnails/13.jpg)
• DGPS Mode Field (Advanced)
• DGPS Status Field (Advanced)– Unavailable
– Receiving
– Using
GPS Setup Page
![Page 14: DAGR Receiver Default Settings. GPS Setup Page Page Function Page Fields –Operating Mode –Power-On Operating Mode –Frequency –SV Code –Elevation Hold](https://reader035.vdocument.in/reader035/viewer/2022062303/5516b10c550346f6208b5259/html5/thumbnails/14.jpg)
• Wage Mode Field (Advanced)
• Wage Status Field (Advanced)
GPS Setup Page
![Page 15: DAGR Receiver Default Settings. GPS Setup Page Page Function Page Fields –Operating Mode –Power-On Operating Mode –Frequency –SV Code –Elevation Hold](https://reader035.vdocument.in/reader035/viewer/2022062303/5516b10c550346f6208b5259/html5/thumbnails/15.jpg)
• SV Hold (Advanced)
To access the field menu list, push the MENU key. Scroll to the desired menu item (e.g., Edit Field), then push the ENTER key.
GPS Setup Page
![Page 16: DAGR Receiver Default Settings. GPS Setup Page Page Function Page Fields –Operating Mode –Power-On Operating Mode –Frequency –SV Code –Elevation Hold](https://reader035.vdocument.in/reader035/viewer/2022062303/5516b10c550346f6208b5259/html5/thumbnails/16.jpg)
GPS Setup Page
(3) For list editors, scroll to the desired field content, then push the ENTER key.
(4) Display returns to the GPS Setup page with change made to
field content.
![Page 17: DAGR Receiver Default Settings. GPS Setup Page Page Function Page Fields –Operating Mode –Power-On Operating Mode –Frequency –SV Code –Elevation Hold](https://reader035.vdocument.in/reader035/viewer/2022062303/5516b10c550346f6208b5259/html5/thumbnails/17.jpg)
CHECK ON LEARNING
• Name 3 of the DAGR operating modes.– Continuous, fix, average, time
delay, average, stand-by, rehearsal, test, and off.
• What are the two SV-Code fields? – All-Y and mixed
![Page 18: DAGR Receiver Default Settings. GPS Setup Page Page Function Page Fields –Operating Mode –Power-On Operating Mode –Frequency –SV Code –Elevation Hold](https://reader035.vdocument.in/reader035/viewer/2022062303/5516b10c550346f6208b5259/html5/thumbnails/18.jpg)
a. Enable Auto-Off Function •NOTE
– Auto-Off Mode
(1) From the Power Saver page, highlight the Auto-Off Mode field. Push the ENTER key.
- Auto-off Mode Field
Power Saver Page
![Page 19: DAGR Receiver Default Settings. GPS Setup Page Page Function Page Fields –Operating Mode –Power-On Operating Mode –Frequency –SV Code –Elevation Hold](https://reader035.vdocument.in/reader035/viewer/2022062303/5516b10c550346f6208b5259/html5/thumbnails/19.jpg)
(2) Highlight On, then push the ENTER key. The display returns to the Power Saver page with the Auto-Off Mode field highlighted including changes made.
(3) From the Power Saver page, highlight the Auto-Off Timer field. Push the ENTER key.
- Auto-Off Timer Field
Power Saver Page
![Page 20: DAGR Receiver Default Settings. GPS Setup Page Page Function Page Fields –Operating Mode –Power-On Operating Mode –Frequency –SV Code –Elevation Hold](https://reader035.vdocument.in/reader035/viewer/2022062303/5516b10c550346f6208b5259/html5/thumbnails/20.jpg)
Power Saver Page
(4) Enter the desired time value (15 seconds up to 30 minutes), then push the ENTER key. The display returns to the Power Saver page with the Auto-Off Timer field highlighted including changes made
![Page 21: DAGR Receiver Default Settings. GPS Setup Page Page Function Page Fields –Operating Mode –Power-On Operating Mode –Frequency –SV Code –Elevation Hold](https://reader035.vdocument.in/reader035/viewer/2022062303/5516b10c550346f6208b5259/html5/thumbnails/21.jpg)
Power Saver Page
b.Enable Auto-Standby Function
• NOTE
– Auto-Standby Mode
(1) From the Power Saver page, highlight the Auto-Standby Mode field. Push the ENTER key.
- Auto-Standby Field
![Page 22: DAGR Receiver Default Settings. GPS Setup Page Page Function Page Fields –Operating Mode –Power-On Operating Mode –Frequency –SV Code –Elevation Hold](https://reader035.vdocument.in/reader035/viewer/2022062303/5516b10c550346f6208b5259/html5/thumbnails/22.jpg)
Power Saver Page
(2) Highlight On, then push the ENTER key. The display returns to the Power Saver page with the Auto-Standby Mode field highlighted including changes made.
![Page 23: DAGR Receiver Default Settings. GPS Setup Page Page Function Page Fields –Operating Mode –Power-On Operating Mode –Frequency –SV Code –Elevation Hold](https://reader035.vdocument.in/reader035/viewer/2022062303/5516b10c550346f6208b5259/html5/thumbnails/23.jpg)
(3) From the Power Saver page, highlight the Auto-Standby Timer field. Push the ENTER key.
- Auto-Standby Timer Field
Note
- Set Battery Page to enable auto-standby
Power Saver Page
![Page 24: DAGR Receiver Default Settings. GPS Setup Page Page Function Page Fields –Operating Mode –Power-On Operating Mode –Frequency –SV Code –Elevation Hold](https://reader035.vdocument.in/reader035/viewer/2022062303/5516b10c550346f6208b5259/html5/thumbnails/24.jpg)
(4) Enter the desired time value (5 minutes up to 9 hours), then push the ENTER key. The display returns to the Power Saver page with the Auto-Standby Timer field highlighted including changes made.
Power Saver Page
![Page 25: DAGR Receiver Default Settings. GPS Setup Page Page Function Page Fields –Operating Mode –Power-On Operating Mode –Frequency –SV Code –Elevation Hold](https://reader035.vdocument.in/reader035/viewer/2022062303/5516b10c550346f6208b5259/html5/thumbnails/25.jpg)
Enable/Disable Off Mode Display Heater
(1) From the Power Saver page, highlight the Off Mode Display Heater field. Push the ENTER key.
- Off Mode Display Heater Field
Power Saver Page
![Page 26: DAGR Receiver Default Settings. GPS Setup Page Page Function Page Fields –Operating Mode –Power-On Operating Mode –Frequency –SV Code –Elevation Hold](https://reader035.vdocument.in/reader035/viewer/2022062303/5516b10c550346f6208b5259/html5/thumbnails/26.jpg)
Note - Off Mode Display
heater has no effect on operation
(2) Highlight Enabled or Disabled, then push the ENTER key. The display returns to the Power Saver page with the Off Mode Display Heater field highlighted including changes made.
Power Saver Page
![Page 27: DAGR Receiver Default Settings. GPS Setup Page Page Function Page Fields –Operating Mode –Power-On Operating Mode –Frequency –SV Code –Elevation Hold](https://reader035.vdocument.in/reader035/viewer/2022062303/5516b10c550346f6208b5259/html5/thumbnails/27.jpg)
CHECK ON LEARNING
• What is the desired time range for the auto-off timer field?– 15 seconds to 30 minutes
• What is the desired time range for the auto-standby timer field?– 5 minutes to 9 hours
![Page 28: DAGR Receiver Default Settings. GPS Setup Page Page Function Page Fields –Operating Mode –Power-On Operating Mode –Frequency –SV Code –Elevation Hold](https://reader035.vdocument.in/reader035/viewer/2022062303/5516b10c550346f6208b5259/html5/thumbnails/28.jpg)
Disable Auto-On Function(1) From the Auto-On page,
highlight Mode field, then push the ENTER key
Note
- Must be Off for other fields can be configured.
- Mode Field
Auto-On Page
![Page 29: DAGR Receiver Default Settings. GPS Setup Page Page Function Page Fields –Operating Mode –Power-On Operating Mode –Frequency –SV Code –Elevation Hold](https://reader035.vdocument.in/reader035/viewer/2022062303/5516b10c550346f6208b5259/html5/thumbnails/29.jpg)
(2) Highlight Off, then push the ENTER key.
(3) Display returns to the Auto-On page with the Mode field highlighted and changes made.
Auto-On Page
![Page 30: DAGR Receiver Default Settings. GPS Setup Page Page Function Page Fields –Operating Mode –Power-On Operating Mode –Frequency –SV Code –Elevation Hold](https://reader035.vdocument.in/reader035/viewer/2022062303/5516b10c550346f6208b5259/html5/thumbnails/30.jpg)
Select Time Zone (1) From the Auto-On page,
highlight the Start Time and Date or Stop Time and Date fields. Push the MENU key.
(2) Highlight Select Time Zone, then push the ENTER key.
(3) Highlight the desired time zone, then push the ENTER key. Returns to the Auto-On page with the time zone reference changed.
Auto-On Page
![Page 31: DAGR Receiver Default Settings. GPS Setup Page Page Function Page Fields –Operating Mode –Power-On Operating Mode –Frequency –SV Code –Elevation Hold](https://reader035.vdocument.in/reader035/viewer/2022062303/5516b10c550346f6208b5259/html5/thumbnails/31.jpg)
Auto-On Page
Set Start of Auto-On FunctionNote - Two Options
(1) Start auto-on when mode is switched from off. (a) From the auto-on page (with or without a field highlighted), push the MENU key.
![Page 32: DAGR Receiver Default Settings. GPS Setup Page Page Function Page Fields –Operating Mode –Power-On Operating Mode –Frequency –SV Code –Elevation Hold](https://reader035.vdocument.in/reader035/viewer/2022062303/5516b10c550346f6208b5259/html5/thumbnails/32.jpg)
Auto-On Page
(b) Highlight Start When enable, then push the ENTER key.
(c) The auto-on page displays the Start Time and Date filed with Start When Enabled.
- Start Time and Date Field
![Page 33: DAGR Receiver Default Settings. GPS Setup Page Page Function Page Fields –Operating Mode –Power-On Operating Mode –Frequency –SV Code –Elevation Hold](https://reader035.vdocument.in/reader035/viewer/2022062303/5516b10c550346f6208b5259/html5/thumbnails/33.jpg)
Auto-On Page
(2) Start Auto-On at specific time and date (a) From the Auto-On page, highlight the Start Time and Date field, or highlight the Start Time field. Push the ENTER key.
(b) Enter desired start time, then push the ENTER key.
![Page 34: DAGR Receiver Default Settings. GPS Setup Page Page Function Page Fields –Operating Mode –Power-On Operating Mode –Frequency –SV Code –Elevation Hold](https://reader035.vdocument.in/reader035/viewer/2022062303/5516b10c550346f6208b5259/html5/thumbnails/34.jpg)
Auto-On Page
(c) Highlight the Start Date field, then push the ENTER key.
(d) Enter desired start date, then push the ENTER key.
(e) The Auto-On page Start Time and Start Date fields display entered data.
![Page 35: DAGR Receiver Default Settings. GPS Setup Page Page Function Page Fields –Operating Mode –Power-On Operating Mode –Frequency –SV Code –Elevation Hold](https://reader035.vdocument.in/reader035/viewer/2022062303/5516b10c550346f6208b5259/html5/thumbnails/35.jpg)
Auto-On Page
Set Stop of Auto-On FunctionNote - Two Options
(1) Stop auto-on when mode switched to Off. (a) From the auto-on page (with or without a field highlighted), push the MENU key.
![Page 36: DAGR Receiver Default Settings. GPS Setup Page Page Function Page Fields –Operating Mode –Power-On Operating Mode –Frequency –SV Code –Elevation Hold](https://reader035.vdocument.in/reader035/viewer/2022062303/5516b10c550346f6208b5259/html5/thumbnails/36.jpg)
(b) Highlight Stop When Disable, then push the ENTER key.
(c) The auto-on page displays the Stop Time and Date filed with Stop When Disabled.
- Stop Time and Date Field
Auto-On Page
![Page 37: DAGR Receiver Default Settings. GPS Setup Page Page Function Page Fields –Operating Mode –Power-On Operating Mode –Frequency –SV Code –Elevation Hold](https://reader035.vdocument.in/reader035/viewer/2022062303/5516b10c550346f6208b5259/html5/thumbnails/37.jpg)
Auto-On Page
(2) Stop Auto-On at specific time and date (a) From the Auto-On page, highlight the Stop Time and Date field, or highlight the Stop Time field. Push the ENTER key.
(b) Enter desired stop time, then push the ENTER key.
![Page 38: DAGR Receiver Default Settings. GPS Setup Page Page Function Page Fields –Operating Mode –Power-On Operating Mode –Frequency –SV Code –Elevation Hold](https://reader035.vdocument.in/reader035/viewer/2022062303/5516b10c550346f6208b5259/html5/thumbnails/38.jpg)
Auto-On Page
(c) Highlight the Stop Date field, then push the ENTER key.
(d) Enter desired stop date, then push the ENTER key.
(e) The Auto-On page Stop Time and Start Date fields display entered data.
![Page 39: DAGR Receiver Default Settings. GPS Setup Page Page Function Page Fields –Operating Mode –Power-On Operating Mode –Frequency –SV Code –Elevation Hold](https://reader035.vdocument.in/reader035/viewer/2022062303/5516b10c550346f6208b5259/html5/thumbnails/39.jpg)
Set Time interval Between Auto-On Functions
(1) From the Auto-On page, highlight the Time Interval field. Push the ENTER key.
- Time Interval Field
Auto-On Page
![Page 40: DAGR Receiver Default Settings. GPS Setup Page Page Function Page Fields –Operating Mode –Power-On Operating Mode –Frequency –SV Code –Elevation Hold](https://reader035.vdocument.in/reader035/viewer/2022062303/5516b10c550346f6208b5259/html5/thumbnails/40.jpg)
(2) Enter desired time interval, then push the ENTER key.
(3) The Auto-On page Time Interval field displays entered data.
Auto-On Page
![Page 41: DAGR Receiver Default Settings. GPS Setup Page Page Function Page Fields –Operating Mode –Power-On Operating Mode –Frequency –SV Code –Elevation Hold](https://reader035.vdocument.in/reader035/viewer/2022062303/5516b10c550346f6208b5259/html5/thumbnails/41.jpg)
Enable Auto-On Function
(1) From the Auto-On page, highlight the Mode field. Push the ENTER key.
(2) Highlight desired mode of operation (Manual or Automatic), then push the ENTER key.
Auto-On Page
![Page 42: DAGR Receiver Default Settings. GPS Setup Page Page Function Page Fields –Operating Mode –Power-On Operating Mode –Frequency –SV Code –Elevation Hold](https://reader035.vdocument.in/reader035/viewer/2022062303/5516b10c550346f6208b5259/html5/thumbnails/42.jpg)
(3) Auto-On function is now enabled and will start and continue operating as previously set up until disabled. After auto-on is enabled, only the Mode field content can be changed.
Auto-On Page
![Page 43: DAGR Receiver Default Settings. GPS Setup Page Page Function Page Fields –Operating Mode –Power-On Operating Mode –Frequency –SV Code –Elevation Hold](https://reader035.vdocument.in/reader035/viewer/2022062303/5516b10c550346f6208b5259/html5/thumbnails/43.jpg)
CHECK ON LEARNING
• What is the format for the stop date field data?– DD-MM-YYYY
![Page 44: DAGR Receiver Default Settings. GPS Setup Page Page Function Page Fields –Operating Mode –Power-On Operating Mode –Frequency –SV Code –Elevation Hold](https://reader035.vdocument.in/reader035/viewer/2022062303/5516b10c550346f6208b5259/html5/thumbnails/44.jpg)
Set Units Page
(1) From the Units page, push the ENTER key to highlight a field. Push the ENTER key again for edit capabilities of the field.
Units Page
![Page 45: DAGR Receiver Default Settings. GPS Setup Page Page Function Page Fields –Operating Mode –Power-On Operating Mode –Frequency –SV Code –Elevation Hold](https://reader035.vdocument.in/reader035/viewer/2022062303/5516b10c550346f6208b5259/html5/thumbnails/45.jpg)
- Coord/Grid Field
- Resolution Field
Units Page
![Page 46: DAGR Receiver Default Settings. GPS Setup Page Page Function Page Fields –Operating Mode –Power-On Operating Mode –Frequency –SV Code –Elevation Hold](https://reader035.vdocument.in/reader035/viewer/2022062303/5516b10c550346f6208b5259/html5/thumbnails/46.jpg)
- Datum/Ellipsoid Field
- Datum ID Field
Units Page
![Page 47: DAGR Receiver Default Settings. GPS Setup Page Page Function Page Fields –Operating Mode –Power-On Operating Mode –Frequency –SV Code –Elevation Hold](https://reader035.vdocument.in/reader035/viewer/2022062303/5516b10c550346f6208b5259/html5/thumbnails/47.jpg)
- Position Error Field
- Elevation Field
Units Page
![Page 48: DAGR Receiver Default Settings. GPS Setup Page Page Function Page Fields –Operating Mode –Power-On Operating Mode –Frequency –SV Code –Elevation Hold](https://reader035.vdocument.in/reader035/viewer/2022062303/5516b10c550346f6208b5259/html5/thumbnails/48.jpg)
- Reference Field
- Range Field
Units Page
![Page 49: DAGR Receiver Default Settings. GPS Setup Page Page Function Page Fields –Operating Mode –Power-On Operating Mode –Frequency –SV Code –Elevation Hold](https://reader035.vdocument.in/reader035/viewer/2022062303/5516b10c550346f6208b5259/html5/thumbnails/49.jpg)
- Speed Field
- Time Zone Field
Units Page
![Page 50: DAGR Receiver Default Settings. GPS Setup Page Page Function Page Fields –Operating Mode –Power-On Operating Mode –Frequency –SV Code –Elevation Hold](https://reader035.vdocument.in/reader035/viewer/2022062303/5516b10c550346f6208b5259/html5/thumbnails/50.jpg)
- Angle Field
- North Reference Field
Units Page
![Page 51: DAGR Receiver Default Settings. GPS Setup Page Page Function Page Fields –Operating Mode –Power-On Operating Mode –Frequency –SV Code –Elevation Hold](https://reader035.vdocument.in/reader035/viewer/2022062303/5516b10c550346f6208b5259/html5/thumbnails/51.jpg)
- MAGVAR Source Field
- MAGVAR Units Field
Units Page
![Page 52: DAGR Receiver Default Settings. GPS Setup Page Page Function Page Fields –Operating Mode –Power-On Operating Mode –Frequency –SV Code –Elevation Hold](https://reader035.vdocument.in/reader035/viewer/2022062303/5516b10c550346f6208b5259/html5/thumbnails/52.jpg)
- Entered MAGVAR Value Field
Units Page
![Page 53: DAGR Receiver Default Settings. GPS Setup Page Page Function Page Fields –Operating Mode –Power-On Operating Mode –Frequency –SV Code –Elevation Hold](https://reader035.vdocument.in/reader035/viewer/2022062303/5516b10c550346f6208b5259/html5/thumbnails/53.jpg)
(2) Revise the selected field with appropriate information, then push the ENTER key to save changes to that field.
(3) Use the cursor control keys and the ENTER key in a similar manner to individually revise all of the remaining fields as required
Units Page
![Page 54: DAGR Receiver Default Settings. GPS Setup Page Page Function Page Fields –Operating Mode –Power-On Operating Mode –Frequency –SV Code –Elevation Hold](https://reader035.vdocument.in/reader035/viewer/2022062303/5516b10c550346f6208b5259/html5/thumbnails/54.jpg)
CHECK ON LEARNING
• What is a datum?– A representation of the surface of
the earth.
• What are the selections of the speed field?– Metric (kph), English (mph),
Nautical (kts)
![Page 55: DAGR Receiver Default Settings. GPS Setup Page Page Function Page Fields –Operating Mode –Power-On Operating Mode –Frequency –SV Code –Elevation Hold](https://reader035.vdocument.in/reader035/viewer/2022062303/5516b10c550346f6208b5259/html5/thumbnails/55.jpg)
• Page Function– CAUTION
• Enable and Orient Internal Compass
– Note• Cannot Compute Track
and Ground Speed
– Determine Track when receiver is moving slow
Internal Compass
![Page 56: DAGR Receiver Default Settings. GPS Setup Page Page Function Page Fields –Operating Mode –Power-On Operating Mode –Frequency –SV Code –Elevation Hold](https://reader035.vdocument.in/reader035/viewer/2022062303/5516b10c550346f6208b5259/html5/thumbnails/56.jpg)
• Orient the Internal Compass– Held Horizontally
Level
– Reorient compass at 50%, 25% battery life and after replacing primary batteries.
Internal Compass
![Page 57: DAGR Receiver Default Settings. GPS Setup Page Page Function Page Fields –Operating Mode –Power-On Operating Mode –Frequency –SV Code –Elevation Hold](https://reader035.vdocument.in/reader035/viewer/2022062303/5516b10c550346f6208b5259/html5/thumbnails/57.jpg)
Internal Compass
REF Para 10.3.3 a
Enable Internal Compass
(1) From the Internal
Compass page, highlight the Mode field, then set to Enabled.
- Mode Field
![Page 58: DAGR Receiver Default Settings. GPS Setup Page Page Function Page Fields –Operating Mode –Power-On Operating Mode –Frequency –SV Code –Elevation Hold](https://reader035.vdocument.in/reader035/viewer/2022062303/5516b10c550346f6208b5259/html5/thumbnails/58.jpg)
Internal Compass
(2) Set the speed value for the Stop Using Above This Speed field. Select appropriate speed units of measure if required.
- Stop Using When Above This Speed Field
![Page 59: DAGR Receiver Default Settings. GPS Setup Page Page Function Page Fields –Operating Mode –Power-On Operating Mode –Frequency –SV Code –Elevation Hold](https://reader035.vdocument.in/reader035/viewer/2022062303/5516b10c550346f6208b5259/html5/thumbnails/59.jpg)
Internal Compass
(3) Set the time value for the Start Using When Below Speed For field.
- Stop Using When Below Speed For Field
(4) The DAGR activates the internal compass as required without further operator action.
![Page 60: DAGR Receiver Default Settings. GPS Setup Page Page Function Page Fields –Operating Mode –Power-On Operating Mode –Frequency –SV Code –Elevation Hold](https://reader035.vdocument.in/reader035/viewer/2022062303/5516b10c550346f6208b5259/html5/thumbnails/60.jpg)
Internal Compass
REF Para 10.3.3 b
Orient Internal Compass
(1)Place the DAGR, face up, on a flat level surface.
(2) From the Internal Compass page (with or without fields highlighted), push the MENU key.
![Page 61: DAGR Receiver Default Settings. GPS Setup Page Page Function Page Fields –Operating Mode –Power-On Operating Mode –Frequency –SV Code –Elevation Hold](https://reader035.vdocument.in/reader035/viewer/2022062303/5516b10c550346f6208b5259/html5/thumbnails/61.jpg)
Internal Compass
(3) Highlight Calibrate, then push the ENTER key. The Internal Compass Calibration message is displayed.
(4) Slowly rotate the DAGR clockwise until the DAGR indicates calibration is complete. The display advises the operator to maintain or alter current rotation speed. Push the QUIT key to cancel the orientation.
![Page 62: DAGR Receiver Default Settings. GPS Setup Page Page Function Page Fields –Operating Mode –Power-On Operating Mode –Frequency –SV Code –Elevation Hold](https://reader035.vdocument.in/reader035/viewer/2022062303/5516b10c550346f6208b5259/html5/thumbnails/62.jpg)
Internal Compass
(5) Upon completion of the orientation, DAGR notifies the operator and requests acknowledgement. Push the ENTER key to acknowledge or allow it to time out and return to the Internal Compass page.
- Last Calibrated Field
![Page 63: DAGR Receiver Default Settings. GPS Setup Page Page Function Page Fields –Operating Mode –Power-On Operating Mode –Frequency –SV Code –Elevation Hold](https://reader035.vdocument.in/reader035/viewer/2022062303/5516b10c550346f6208b5259/html5/thumbnails/63.jpg)
1. From the Light/Contrast page,
highlight the Light Mode field,
then push the ENTER key.
2. Select either On or Off, then push the ENTER key. Display returns to the Light/Contrast page with change made.
Light/Contrast Page
![Page 64: DAGR Receiver Default Settings. GPS Setup Page Page Function Page Fields –Operating Mode –Power-On Operating Mode –Frequency –SV Code –Elevation Hold](https://reader035.vdocument.in/reader035/viewer/2022062303/5516b10c550346f6208b5259/html5/thumbnails/64.jpg)
Adjust Keypad/Display Lighting Level, Brightness Key Method
(1) From any display, push and hold the BRIGHTNESS key (illuminated bulb icon) and simultaneously push and hold the respective up or down cursor control key.
(2) Keypad/display lighting level adjusts up or down depending on which cursor control key is pushed.
Light/Contrast Page
![Page 65: DAGR Receiver Default Settings. GPS Setup Page Page Function Page Fields –Operating Mode –Power-On Operating Mode –Frequency –SV Code –Elevation Hold](https://reader035.vdocument.in/reader035/viewer/2022062303/5516b10c550346f6208b5259/html5/thumbnails/65.jpg)
1. From the Light/Contrast page, and no fields selected, push the respective up or down cursor control key .
2. The Display Lighting field percentage value and slider control adjust by one percent for each push of the up or down cursor control key. For larger adjustments, push and hold the up or down cursor control key.
- Display Lighting Field
Light/Contrast Page
![Page 66: DAGR Receiver Default Settings. GPS Setup Page Page Function Page Fields –Operating Mode –Power-On Operating Mode –Frequency –SV Code –Elevation Hold](https://reader035.vdocument.in/reader035/viewer/2022062303/5516b10c550346f6208b5259/html5/thumbnails/66.jpg)
Adjust Display Contrast Level
(1) From the Light/Contrast page,
and no fields selected, push the
respective left or right cursor
control key .
Light/Contrast Page
![Page 67: DAGR Receiver Default Settings. GPS Setup Page Page Function Page Fields –Operating Mode –Power-On Operating Mode –Frequency –SV Code –Elevation Hold](https://reader035.vdocument.in/reader035/viewer/2022062303/5516b10c550346f6208b5259/html5/thumbnails/67.jpg)
Light/Contrast Page
(2). The Contrast field percentage value and slider control adjust by one percent for each push of the left or right cursor control key. For larger adjustments, push and hold the left or right cursor control key. - Contrast Field
Note - Can adjust levels by editing the Display lighting Value.
![Page 68: DAGR Receiver Default Settings. GPS Setup Page Page Function Page Fields –Operating Mode –Power-On Operating Mode –Frequency –SV Code –Elevation Hold](https://reader035.vdocument.in/reader035/viewer/2022062303/5516b10c550346f6208b5259/html5/thumbnails/68.jpg)
CHECK ON LEARNING
• What must you avoid when using the internal compass on the DAGR so as not to get an erroneous reading? – Avoid large metal objects, strong
magnetic fields, or other electromagnetic interference.
• When calibrating the internal compass which way do you rotate the DAGR?– Clockwise