Index
Vehicle Application Guide................................................................................................................................................
Installation Type 1..............................................................................................................................................................................Type 2..............................................................................................................................................................................Type 3..............................................................................................................................................................................Type 4..............................................................................................................................................................................Type 5..............................................................................................................................................................................Type 6..............................................................................................................................................................................Vehicle Wiring Reference Chart (pages 9-16).................................................................................................................
ProgrammingModule Programming......................................................................................................................................................Module Reset...................................................................................................................................................................Hard Reset.......................................................................................................................................................................Feature & Option List.......................................................................................................................................................Feature Programming......................................................................................................................................................
LED Diagnostics & Troubleshooting................................................................................................................................
Limited One-Year Consumer Warranty............................................................................................................................
Quick Reference Guide ..................................................................................................................................................
02
03040506070809
1718181920
21
22
23
Installation Guide
Update Alert: Firmware updates are posted on the web on a regular basis. We recommend that you check for firmware and/or install guide updates prior to installing this product.
Door lock control and transponder override firmware compatible with Acura and Honda vehicles. Controls and monitors standard factory security and convenience features such as door locks, alarm, sliding doors, hood and trunk status, as well as tach output plus data transponder interface.
® Acura and Honda are registered trademarks and property of their respective companies.
Rev.: 20151123
Platform: DBALL/DBALL2Firmware: HONDA4
© 2015 Directed. All rights reserved.
Wire jump template
The following table lists the vehicles and features which are compatible with this product. The number assigned to each year allows you to determine which installation type should be used for your vehicle.
Vehicles
2014
2013
2012
2011
2010
2009
2008
2007
2006
2005
2004
2003
2002
2001
PK
-Im
mobilizer
Bypass-D
ata
No
Key
Req'd
DL-A
rmF
acto
ryS
ecurity
DL-D
isarm
Facto
ryS
ecurity
DL-D
oor
Lock
Contr
ol
DL-D
oor
Unlo
ck
DL-D
river
Priority
Unlo
ck
DL-S
lidin
gD
oor
Contr
olD
river
DL-S
lidin
gD
oor
Contr
olP
assenger
DL-T
runk
/H
atc
hR
ele
ase
FO
B-C
ontr
olo
fafterm
ark
etala
rmw
ithO
EM
rem
ote
RS
-Tach
/R
PM
Outp
ut
SS
-Entr
yM
onito
ring
ALL
Door
Pin
s
SS
-Entr
yM
onito
ring
Driver
Door
Pin
SS
-Ent r
yM
onito
ring
Hood
Pin
SS
-Entr
yM
onito
ring
Tru
nk/H
atc
hP
in
ST
-Bra
ke
Sta
tus
(footbra
ke)
ST
-E-B
rake
Sta
tus
Acura
CSX 2 2 2 2 2 2 • • • • • • • D • • D • • • •
EL 3 3 3 3 3 • • • • • • D
MDX 2 2 2 2 2 2 2 • • • • • • • D • • D • • • •
MDX 4 4 4 4 •
RDX 2 2 2 2 2 2 • • • • • • • D • • D • • • •
RL 5 5 5 5 5 5 5 5 • • • • • • • D • • D • • • •
RSX 3 3 3 3 3 • • • • • • D
TL 1 1 1 1 1 • • • • • • • D • • D • • • •
TSX 1 1 1 1 1 • • • • • • • D • • D • • • •
Honda
Accord 1 1 1 1 1 • • • • • • • D • • D • • • •
Accord Hybrid 1 1 1 • • • • • • • D • • D • • • •
Civic 2 2 2 2 2 2 • • • • • • • D • • D • • • •
Civic 3 3 3 3 3 • • • • • • D
Civic Hybrid 2 2 2 2 2 • • • • • • • D • • D • • • •
Civic Hybrid 3 3 3 • • • • • • D
CRV 2 2 2 2 2 • • • • • • • D • • D • • • •
CRV 3 3 3 3 3 • • • • • • D
CR-Z 2 2 2 2 • • • • • • D • • D • • • •
Element 3 3 3 3 3 3 3 3 3 • • • • • • D
Fit 2 2 2 2 2 • • • • • • D • • D • • • •
Fit 4 4 •
Insight 2 • • • • • • • D • • D • • • •
Odyssey 1 1 1 1 1 1 • • • • • • • • • D • • D • • • •
Pilot 6 6 6 6 • • • • • • D
Ridgeline 1 1 1 1 1 1 1 1 1 • • • • • • D • • D • • • •
Legend:
D: Data-to-Data (D2D) only DL: OE Door Lock & Alarm Controls RS: Remote Start & Engine Controls
W: Wire-to-Wire (W2W) only FOB: Sync CAN Interface w / FOB Remote SS: Entry Point Status-Security
•: D2D and W2W PK: Transponder & Immobilizer Override ST: Function/Feature Status
Vehicle Application GuidePage 2
Rev.: 20151123
Platform: DBALL/DBALL2Firmware: HONDA4
© 2015 Directed. All rights reserved.
Wire jump template
[1] (AC) Tach Input(+) Brake Input
(-) E-Brake Status Input
(-) Trunk Status Input(-) Door Status Input
Rem
ote
Sta
rter
(-) GWR (Status)
(-) Lock Output(-) Unlock Output(-) Trunk Output
(-) Aux2 (Driver side sliding door, if applicable)(-) Aux1 (Passenger side sliding door, if applicable)
(+) Ignition 1 Output
(-) Hood Status Input
1: Green: (-) Lock Input
2: Blue: (-) Unlock Input
3: Red/White: (-) Trunk Input
9: Pink: (+) Ignition Input
5: Violet/Black: (-) Aux2 (Driver side sliding door, if applicable)
4: White/Violet: (-) Aux1 (Passenger side sliding door, if applicable)
10: Blue/White: (-) GWR (Status) Input
Single Wire CAN
[1] (AC) Tach Output: Violet/White: 5
(+) Brake Status Output: Gray: 6
(-) Door Status Output: Green/White: 3
(-) Trunk Status Output: Red/Black: 4
(-) Handbrake Output: Yellow/Black: 10
Immobilizer Data: Orange/Black: 11
(-) Hood Status Output: Blue/Red: 12
XKD2D65
9 8 7 456 3 2 1
21 20 19 18 17 13 12 11 1016 15 14
Fuse/Relay BoxKick panel driver side
(-) Ground(+) 12vParking lights(+) Start(+) Accessory 1(+) Accessory 2
10
DBALL/DBALL2
Prog. button
LED
4
14
12
2
TX
(-) Ground
RX
(+)12vRF
Single Wire CAN: Lt. Green: 1
Security light: Orange/Red: 10
Security light: Yellow/Red: 11
(+) 12v (+) 12v: Red: 13
(-) Ground (-) Ground: Black: 14
Installation Type 1Page 3
Not required in D2D mode.
[1] Tach wire is an optional connection required on some remote starters, which do not support a tach signal in D2D.
Connect to Vehicle(see Vehicle Wiring Reference Chart)
HOND
A
75 641 352
ImmobilizerConnector (Green, 7 pins)
Cut
Secu
rity light
Imm
obilize
r data
See Vehicle Wiring Reference Chart for more information.
All connectors are displayed from the wire side (unless specified otherwise).
Rev.: 20151123
Platform: DBALL/DBALL2Firmware: HONDA4
© 2015 Directed. All rights reserved.
Wire jump template
(-) Ground
(+) 12vParking lights(+) Start(+) Accessory
Page 4
[1] (AC) Tach Input(-) Trunk Status Input(-) Door Status Input
Rem
ote
Sta
rter
(-) GWR (Status)
(-) Lock Output
(-) Unlock Output
(-) Trunk Output
(+) Ignition 1 Output
10
DBALL/DBALL2
Programming button
LED
1: Green: (-) Lock Input
2: Blue: (-) Unlock Input
3: Red/White: (-) Trunk Input
9: Pink: (+) Ignition Input
10: Blue/White: (-) GWR (Status) Input
4
14
12
2
Single Wire CAN: Lt. Green: 1
(+) 12v: Red: 13
(-) Ground: Black: 14
[1] (AC) Tach Output: Violet/White: 5
(-) Door Status Output: Green/White: 3
(-) Unlock Output: Green/Black: 2
(-) Lock Output: Black/White: 1
(-) Trunk Status Output: Red/Black: 4
XKD2D65
Installation Type 2
TX
(-) Ground
RX
(+)12v
(+) 12v
(-) Ground
(+) Brake Status Output: Gray: 6
(-) Handbrake Output: Yellow/Black: 10
Immobilizer Data: Orange/Black: 11
(-) Hood Status Output: Blue/Red: 12
(+) Brake Input
(-) Hood Status Input
Vehicle Year LocationLock wire
color & pin #
Unlock wire color
& pin #
Immo. connector
color
Acura CSX 2006-2011 Above driver kick, white 18 pin plug Green, pin 16 Gray, pin 12 White connector
Acura RDX 2009-2012 Above driver kick, blue 23 pin plug Blue, pin 5 Gray, pin 22 Green connector
Acura RDX 2007-2008 Above driver kick, white 16 pin plug Blue, pin 13 Gray, pin 12 Green connector
Honda Civic 2006-2011 Above driver kick, white 18 pin plug Green, pin 16 Gray, pin 12 White connector
Honda CRV 2007-2011 Above driver kick, brown 18 pin plug Blue, pin 16 Gray, pin 12 White connector
Honda CR-Z 2011-2012 Above driver kick, green 12 pin plug Green, pin 11 Light Green, pin 6 Green connector
Honda Fit 2009-2013 Driver kick, door harness Light Blue Gray Green connector
Honda Insight 2010 Driver kick, door harness Green White Green connector
Reference Chart for Lock / Unlock wires & Immo. connector color
Lock & Unlock wires are required to eliminate issuescaused by the OEM alarm.Not required for Acura MDX.
RF
Connect to Vehicle(see Vehicle Wiring Reference Chart)
Not required in D2D mode.
[1] Tach wire is an optional connection required on some remote starters, which do not support a tach signal in D2D.
HOND
A
75 641 352
ImmobilizerConnector (7-pin conn.)
Single Wire CAN: pin 4
Immobilizer data:pin 3
(-) E-Brake Status Input
See Vehicle Wiring Reference Chart for more information.
All connectors are displayed from the wire side (unless specified otherwise).
Rev.: 20151123
Platform: DBALL/DBALL2Firmware: HONDA4
© 2015 Directed. All rights reserved.
Wire jump template
HOND
A
75 641 352
ImmobilizerConnector (Green, 7 pins)
Rem
ote
Sta
rter(-) GWR (Status)
(+) Ignition Output
Security light: Orange/Red: 10
Security light: Yellow/Red: 11
Cut
Cut
Secu
rity light
Imm
obilize
r data
(-) Ground
(+) 12v
Parking lights
(+) Start
(+) Accessory 1
(+) Accessory 2
(-) Neutral Safety (DEI Platform only)
(+) Brake
(-) Hood Pin
(AC) Tach
XKD2D65
10
DBALL/DBALL2
Programming button
LED
4
14
12
2
TX
(-) Ground
RX
(+)12vRF
Immobilizer Data: Orange/Black: 11
Blue/OrangeDoor Lock Data Wire: Yellow/Black: 10
1
8
2 5
9 1512
3 6
10 1613
4 7
11 1714
Keyless Entry DataBack of Fuse/Relay Box
(Green connector K, 17 pins)
Installation Type 3Page 5
Connect to Vehicle(see Vehicle Wiring Reference Chart)
See Vehicle Wiring Reference Chart for more information.
9: Pink: (+) Ignition Input
10: Blue/White: (-) GWR (Status) Input
Vehicle Year Alarm Module LocationWire color &
pin #
Acura EL 2001-05 Under left side of dash, black/white 20-pin Yellow, pin 11
Acura RSX 2002-07 Under left side of dash, black/white 20-pin Yellow, pin 11
Honda Civic 2001-05 Under left side of dash, green 16-pin Yellow, pin 8
Honda CRV 2002-06 Under left side of dash, green 22-pin Yellow, pin 15
Honda Element 2003-11 Under left side of dash, green 22-pin Yellow, pin 15
Alarm Ignition Interrupt
[1] Alarm Interrupt: Yellow: 8
[1] Alarm Interrupt: Orange/Yellow: 9
(+) 12v (+) 12v: Red: 13
[1] Only required if the vehicle is equipped with a factory alarm system.
(-) Ground (-) Ground: Black: 14
Not required in D2D mode.
(-) Lock Output
(-) Unlock Output
(-) Trunk Output
1: Green: (-) Lock Input
2: Blue: (-) Unlock Input
3: Red/White: (-) Trunk Input
All connectors are displayed from the wire side (unless specified otherwise).
Rev.: 20151123
Platform: DBALL/DBALL2Firmware: HONDA4
© 2015 Directed. All rights reserved.
Wire jump template
Rem
ote
Sta
rter
(-) GWR (Status)
(+) Ignition Output
Immobilizer Data: Orange/Black: 11
(-) Ground
(+) 12v
Parking lights
(+) Start
(+) Accessory 1
(+) Accessory 2
(-) Neutral Safety (DEI Platform only)
(+) Brake
(-) Hood Pin
(AC) Tach
XKD2D65
10
DBALL/DBALL2
Programming button
LED
4
14
12
2
TX
(-) Ground
RX
(+)12vRF
9: Pink: (+) Ignition Input
10: Blue/White: (-) GWR (Status) Input
Connect to Vehicle(see Vehicle Wiring Reference Chart)
Installation Type 4Page 6
Not required in D2D mode.
HOND
A
75 641 352
ImmobilizerConnector (Green, 7 pins)
Cut
Secu
rity light
Imm
obilize
r data
Security light: Orange/Red: 10
Security light: Yellow/Red: 11
(+) 12v (+) 12v: Red: 13
(-) Ground (-) Ground: Black: 14
1: Green: (-) Lock Input
2: Blue: (-) Unlock Input
3: Red/White: (-) Trunk Input
All connectors are displayed from the wire side (unless specified otherwise).
See Vehicle Wiring Reference Chart for more information.
Rev.: 20151123
Platform: DBALL/DBALL2Firmware: HONDA4
© 2015 Directed. All rights reserved.
Wire jump template
3121
3020
2919
2818
27171613
2615
2514
2412
2311
22101 2 3 4 5 6 7 8 9
(-) Ground
(+) 12v
Parking lights
(+) Start
(+) Accessory 1
(+) Accessory 2
Installation Type 5
[1] (AC) Tach Input(+) Brake Input
(-) Trunk Status Input(-) Door Status Input
Rem
ote
Sta
rter
(-) GWR (Status)
(-) Lock Output
(-) Unlock Output
(-) Trunk Output
(+) Ignition Output
(-) Hood Status Input
1: Green: (-) Lock Input
2: Blue: (-) Unlock Input
3: Red/White: (-) Trunk Input
9: Pink: (+) Ignition Input
10: Blue/White: (-) GWR (Status) Input
Single Wire CAN: Lt. Green: 1
Red
Security light: Orange/Red: 10
RFID Light: Yellow: 8
Security light: Yellow/Red: 11
RFID Light: Orange/Yellow: 9
(+) 12v (+) 12v: Red: 13
(-) Ground (-) Ground: Black: 14
Page 7
Keyless Access Control Unit(Black 31-pin connector left of the brake switch)
See Vehicle Wiring Reference Chart for more information.
Fuse/Relay BoxKick panel driver side
XKD2D65
10
DBALL/DBALL2
Programming button
LED
4
14
12
2
TX
(-) Ground
RX
(+)12vRF
9 8 7 456 3 2 1
21 20 19 18 17 13 12 11 1016 15 14
Connect to Vehicle(see Vehicle Wiring Reference Chart)
Not required in D2D mode.
[1] Tach wire is an optional connection required on some remote starters, which do not support a tach signal in D2D.
HOND
A
75 641 352
ImmobilizerConnector (Green, 7 pins)
Cut
Secu
rity light
Imm
obilize
r data
[1] (AC) Tach Output: Violet/White: 5
(+) Brake Status Output: Gray: 6
(-) Door Status Output: Green/White: 3
(-) Trunk Status Output: Red/Black: 4
(-) Handbrake Output: Yellow/Black: 10
Immobilizer Data: Orange/Black: 11
(-) Hood Status Output: Blue/Red: 12
(-) E-Brake Status Input
All connectors are displayed from the wire side (unless specified otherwise).
Rev.: 20151123
Platform: DBALL/DBALL2Firmware: HONDA4
© 2015 Directed. All rights reserved.
Wire jump template
HOND
A
75 641 352
ImmobilizerConnector (Green, 7 pins)
Ignition Switch(Green, 6 pins)
Rem
ote
Sta
rter
(-) GWR (Status)
(+) Ignition Output
(-) Keysense, Blue/Black
Security light: Orange/Red: 10
Security light: Yellow/Red: 11
Cut
Cut
Secu
rity light
Imm
obilize
r data
(-) Ground
(+) 12v
Parking lights
(+) Start
(+) Accessory 1
(+) Accessory 2
(-) Neutral Safety (DEI Platform only)
(+) Brake
(-) Hood Pin
(AC) Tach
(-) Lock
(-) Unlock
XKD2D65
10
DBALL/DBALL2
Programming button
LED
4
14
12
2
TX
(-) Ground
RX
(+)12vRF
Immobilizer Data: Orange/Black: 11
Installation Type 6Page 8
Connect to Vehicle(see Vehicle Wiring Reference Chart)
See Vehicle Wiring Reference Chart for more information.
9: Pink: (+) Ignition Input
10: Blue/White: (-) GWR (Status) Input
Vehicle Year Alarm Module LocationWire color &
pin #
Honda Pilot LX & VP 2005-08 Black box above brake plug, green 22-pin Yellow, pin 15
Honda Pilot EX, EX-L & SE 2005-08 At the right of the glove box, green 7-pin Yellow, pin 5
Alarm Ignition Interrupt
[1] Alarm Interrupt: Yellow: 8
[1] Alarm Interrupt: Orange/Yellow: 9
(+) 12v (+) 12v: Red: 13
[1] Only required if the vehicle is equipped with a factory alarm system.
(-) Ground (-) Ground: Black: 14
Not required in D2D mode.
1 4352 5 6
ONLY in W2W
1: Green: (-) Lock Input
2: Blue: (-) Unlock Input
1810 13
1 6
8 11 14 169 12 15 17
2 3 4 5
7
Pin 14, Brown
Door Lock DataFront of Fuse Box
(Green connector H, 18 pins)
(-) GroundDoor Lock Data Wire: Yellow/Black: 10
6: White/Black: (-) Door Lock Type Input [1]
All connectors are displayed from the wire side (unless specified otherwise).
Rev.: 20151123
Platform: DBALL/DBALL2Firmware: HONDA4
© 2015 Directed. All rights reserved.
Wire jump template
Vehicle Wiring Reference ChartPage 9
Function Connector Location Pin Wire
Immo. Data 7-pin immobilizer connector 3 Light Green
SW CAN 7-pin immobilizer connector 4 Pink
Ignition Ignition switch 6 Blue
12 Volts Ignition switch 3 White
Starter Ignition switch 1 Yellow
Accessory 1 Ignition switch 4 Orange
Accessory 2 Ignition switch 5 Red
Parking Lights Headlight switch, Black/White 12 pins 11 Gray
Brake Brake switch 2 Light Green
Hood Pin Hood switch 2 Light Blue
Immo. Data 7-pin immobilizer connector 2 Red/Blue
Security Light 7-pin immobilizer connector 5 Blue/Orange
Ignition Ignition switch 6 Black/Yellow
12 Volts Ignition switch 3 White
Starter Ignition switch 1 Black/White
Accessory 1 Ignition switch 4 Black/Red
Accessory 2 Ignition switch 5 White/Red
Parking Lights Headlight switch, Gray 16 pins 13 Blue
Brake Brake switch 2 White/Black
Tach Fuel injector 4 2 Yellow
Immo. Data 7-pin immobilizer connector 2 Red
Security Light 7-pin immobilizer connector 5 Pink
Ignition Ignition switch - Black/Yellow
12 Volts Ignition switch - White
Starter Ignition switch - Black/White
Accessory 1 Ignition switch - Yellow
Accessory 2 Ignition switch - White/Black
Parking Lights Headlight switch, White 14 pins 7 Red/Yellow
Brake Brake switch 2 White/Black
Hood Pin Hood switch 2 Yellow
Immo. Data 7-pin immobilizer connector 3 Light Green
SW CAN 7-pin immobilizer connector 4 Light Green
Ignition Ignition switch 6 Pink
12 Volts Ignition switch 3 White
Starter Ignition switch 1 Yellow
Accessory 1 Ignition switch 4 Orange
Accessory 2 Ignition switch 5 Red
Parking Lights Headlight switch, Green 10 pins 3 Brown
Brake Brake switch 2 Light Green
Hood Pin Hood switch 2 Green
Tach Fuel injector 4 2 Yellow
* Vehicles with blue-highlighted wires do NOT have a connector at the ignition switch or headlight switch.
Acura CSX 2006-2011
Acura EL 2001-2005
Acura MDX 2003-2006
Acura MDX 2007-2013
Rev.: 20151123
Platform: DBALL/DBALL2Firmware: HONDA4
© 2015 Directed. All rights reserved.
Wire jump template
Page 10
Function Connector Location Pin Wire
Immo. Data 7-pin immobilizer connector 3 Light Green
SW CAN 7-pin immobilizer connector 4 Pink
Ignition Ignition switch 6 Blue
12 Volts Ignition switch 3 White
Starter Ignition switch 1 Yellow
Accessory 1 Ignition switch 4 Orange
Accessory 2 Ignition switch 5 Red
Parking Lights Headlight switch, Black/White 12 pins 3 Gray
Brake Brake switch 2 Light Green
Hood Pin Hood switch 2 Gray
Immo. Data 7-pin immobilizer connector 2 Lt. Green or Orange
Security Light 7-pin immobilizer connector 5 Blue or Red
SW CAN Fuse/relay box, Green 21 pins 4 Light Green
Ignition Ignition switch 6 White
12 Volts Ignition switch 3 White
Starter Ignition switch 1 Blue
Accessory 1 Ignition switch 4 Blue
Accessory 2 Ignition switch 5 Red
Parking Lights Headlight switch - Red/Black
Brake Brake switch 2 Light Green
Hood Pin Hood switch 2 Green
Immo. Data 7-pin immobilizer connector 2 Orange
Security Light 7-pin immobilizer connector 5 Red
SW CAN Fuse/relay box, Green 21 pins 4 Light Green
Ignition Ignition switch 6 White
12 Volts Ignition switch 3 White
Starter Ignition switch 1 Blue
Accessory 1 Ignition switch 4 Blue
Accessory 2 Ignition switch 5 Red
Parking Lights Headlight switch - Red/Black
Brake Brake switch 2 Light Green
Hood Pin Hood switch 2 Green
Tach Fuel injector 4 2 Yellow
Immo. Data 7-pin immobilizer connector 2 Red/Blue
Security Light 7-pin immobilizer connector 5 Blue/Orange
Ignition Ignition switch 6 Black/Yellow
12 Volts Ignition switch 3 White
Starter Ignition switch 1 Black/White
Accessory 1 Ignition switch 4 Black/Red
Accessory 2 Ignition switch 5 White/Red
Parking Lights Headlight switch, Gray 16 pins 13 Blue
Brake Brake switch 2 White/Black
Hood Pin Hood switch 2 Green/Black
Tach Fuel injector 4 2 Yellow
* Vehicles with blue-highlighted wires do NOT have a connector at the ignition switch or headlight switch.
Acura RL 2005-2006
Acura RDX 2007-2012
Acura RL 2007-2012
Acura RSX 2002-2003
Rev.: 20151123
Platform: DBALL/DBALL2Firmware: HONDA4
© 2015 Directed. All rights reserved.
Wire jump template
Page 11
Function Connector Location Pin Wire
Immo. Data 7-pin immobilizer connector 2 Red/Blue
Security Light 7-pin immobilizer connector 5 Blue/Orange
Ignition Ignition switch 6 Black/Yellow
12 Volts Ignition switch 3 White
Starter Ignition switch 1 Black/White
Accessory 1 Ignition switch 4 Black/Red
Accessory 2 Ignition switch 5 White/Red
Parking Lights Headlight switch, Gray 16 pins 13 Blue
Brake Brake switch 2 White/Black
Hood Pin Hood switch 2 Green/Black
Tach Fuel injector 4 2 Yellow
Immo. Data 7-pin immobilizer connector 2 Red/Blue
Security Light 7-pin immobilizer connector 5 Blue/Orange
SW CAN Fuse/relay box, Green 21 pins 4 Brown/Black
Ignition Ignition switch 6 Black/Yellow
12 Volts Ignition switch 3 White
Starter Ignition switch 1 Black/White or Black
Accessory 1 Ignition switch 4 Black/Red
Accessory 2 Ignition switch 5 White/Red
Parking Lights Headlight switch - Red/Black
Brake Brake switch 2 White/Black
Hood Pin Hood switch 2 Green/Black
Immo. Data 7-pin immobilizer connector 2 Yellow
Security Light 7-pin immobilizer connector 5 Orange
SW CAN Fuse/relay box, Green 21 pins 4 Brown/Black
Ignition Ignition switch 6 Black/Yellow
12 Volts Ignition switch 3 White
Starter Ignition switch 1 Black/White or Black
Accessory 1 Ignition switch 4 Black/Red
Accessory 2 Ignition switch 5 White/Red
Parking Lights Headlight switch - Red/Black
Brake Brake switch 2 White/Black
Hood Pin Hood switch 2 Green/Black
Immo. Data 7-pin immobilizer connector 2 Red/Blue
Security Light 7-pin immobilizer connector 5 Blue/Orange
SW CAN Fuse/relay box, Green 21 pins 4 Brown/Red
Ignition Ignition switch 6 Black/Yellow
12 Volts Ignition switch 3 White
Starter Ignition switch 1 Black/White
Accessory 1 Ignition switch 4 Black/Red
Accessory 2 Ignition switch 5 White/Red
Parking Lights Headlight switch - Red/Black
Brake Brake switch 2 White/Black
Hood Pin Hood switch 2 Green/Black
* Vehicles with blue-highlighted wires do NOT have a connector at the ignition switch or headlight switch.
Acura RSX 2004-2007
Acura TL 2004-2006
Acura TL 2007-2008
Acura TSX 2004-2005
Rev.: 20151123
Platform: DBALL/DBALL2Firmware: HONDA4
© 2015 Directed. All rights reserved.
Wire jump template
Page 12
Function Connector Location Pin Wire
Immo. Data 7-pin immobilizer connector 2 Yellow
Security Light 7-pin immobilizer connector 5 Orange
SW CAN Fuse/relay box, Green 21 pins 4 Brown/Red
Ignition Ignition switch 6 Black/Yellow
12 Volts Ignition switch 3 White
Starter Ignition switch 1 Black/White
Accessory 1 Ignition switch 4 Black/Red
Accessory 2 Ignition switch 5 White/Red
Parking Lights Headlight switch - Red/Black
Brake Brake switch 2 White/Black
Hood Pin Hood switch 2 Green/Black
Immo. Data 7-pin immobilizer connector 2 Red/Blue
Security Light 7-pin immobilizer connector 5 Blue/Orange
SW CAN Fuse/relay box, Green 21 pins 4 Brown/Red
Ignition Ignition switch 6 Black/Yellow
12 Volts Ignition switch 3 White
Starter Ignition switch 1 Black/White
Accessory 1 Ignition switch 4 Black/Red
Accessory 2 Ignition switch 5 White/Red
Parking Lights Headlight switch - Red/Black
Brake Brake switch 2 White/Black
Hood Pin Hood switch 2 Green/Black
Immo. Data 7-pin immobilizer connector 2 Yellow
Security Light 7-pin immobilizer connector 5 Red
SW CAN Fuse/relay box, Green 21 pins 4 Dark Green
Ignition Ignition switch 6 Black/Yellow
12 Volts Ignition switch 3 White
Starter Ignition switch 1 Black/White
Accessory 1 Ignition switch 4 Black/Red
Accessory 2 Ignition switch 5 White/Red
Parking Lights Headlight switch - Red/Black
Brake Brake switch 2 White/Black
Hood Pin Hood switch 2 Green/Black
Immo. Data 7-pin immobilizer connector 2 Red/Blue
Security Light 7-pin immobilizer connector 5 Blue/Orange
Keyless Entry Data Back of fuse/relay box, Green 17 pins 2 Blue/Orange
Ignition Ignition switch 6 Black/Yellow
12 Volts Ignition switch 3 White
Starter Ignition switch 1 Black/White
Accessory 1 Ignition switch 4 Black/Red
Accessory 2 Ignition switch 5 White/Red
Parking Lights Headlight switch, Gray 16 pins 13 Blue
Brake Brake switch 2 White/Black
Tach Fuel injector 4 2 Yellow
* Vehicles with blue-highlighted wires do NOT have a connector at the ignition switch or headlight switch.
Acura TSX 2006-2008
Honda Accord 2003-2007
Honda Accord Hybrid 2005-2007
Honda Civic 2001-2005
Rev.: 20151123
Platform: DBALL/DBALL2Firmware: HONDA4
© 2015 Directed. All rights reserved.
Wire jump template
Page 13
Function Connector Location Pin Wire
Immo. Data 7-pin immobilizer connector 3 Light Green
SW CAN 7-pin immobilizer connector 4 Pink
Ignition Ignition switch 6 Blue
12 Volts Ignition switch 3 White
Starter Ignition switch 1 Yellow
Accessory 1 Ignition switch 4 Orange
Accessory 2 Ignition switch 5 Red
Parking Lights Headlight switch, Black/White 12 pins 11 Gray
Brake Brake switch 2 Light Green
Hood Pin Hood switch 2 Light Blue
Immo. Data 7-pin immobilizer connector 2 Red/Blue
Security Light 7-pin immobilizer connector 5 Blue/Orange
Ignition Ignition switch 6 Blue
12 Volts Ignition switch 3 White
Starter Ignition switch 1 Yellow
Accessory 1 Ignition switch 4 Orange
Accessory 2 Ignition switch 5 Red
Parking Lights Headlight switch, Gray 16 pins 13 Blue
Brake Brake switch 2 White/Black
Tach Fuel injector 4 2 Yellow
Immo. Data 7-pin immobilizer connector 3 Light Green
SW CAN 7-pin immobilizer connector 4 Pink
Ignition Ignition switch 6 Blue
12 Volts Ignition switch 3 White
Starter Ignition switch 1 Yellow
Accessory 1 Ignition switch 4 Orange
Accessory 2 Ignition switch 5 Red
Parking Lights Headlight switch, Black/White 12 pins 11 Gray
Brake Brake switch 2 Light Green
Hood Pin Hood switch 2 Light Blue
Immo. Data 7-pin immobilizer connector 2 White
Security Light 7-pin immobilizer connector 5 Blue/Orange
Keyless Entry Data Back of fuse/relay box, Green 17 pins 2 Blue/Orange
Ignition Ignition switch 6 Black/Yellow
12 Volts Ignition switch 3 White
Starter Ignition switch 1 Black/White
Accessory 1 Ignition switch 4 Black/Red
Accessory 2 Ignition switch 5 White/Red
Parking Lights Headlight switch, Gray 16 pins 13 Blue
Brake Brake switch 2 White/Black
Hood Pin Hood switch 2 Yellow/Red
Tach Fuel injector 4 2 Yellow
* Vehicles with blue-highlighted wires do NOT have a connector at the ignition switch or headlight switch.
Honda Civic Hybrid 2003-2005
Honda Civic 2006-2011
Honda Civic Hybrid 2006-2010
Honda CRV 2002-2004
Rev.: 20151123
Platform: DBALL/DBALL2Firmware: HONDA4
© 2015 Directed. All rights reserved.
Wire jump template
Page 14
Function Connector Location Pin Wire
Honda CRV 2005-2006
Immo. Data 7-pin immobilizer connector 2 White
Security Light 7-pin immobilizer connector 5 Blue/Orange
Keyless Entry Data Back of fuse/relay box, Green 17 pins 2 Blue/Orange
Ignition Ignition switch 6 Black/Yellow
12 Volts Ignition switch 3 White
Starter Ignition switch 1 Black/White
Accessory 1 Ignition switch 4 Black/Red
Accessory 2 Ignition switch 5 White/Red
Parking Lights Headlight switch, Gray 16 pins 13 Blue
Brake Brake switch 2 White/Black
Immo. Data 7-pin immobilizer connector 3 Green
SW CAN 7-pin immobilizer connector 4 Pink
Ignition Ignition switch 6 Blue
12 Volts Ignition switch 3 White
Starter Ignition switch 1 Yellow
Accessory 1 Ignition switch 4 Orange
Accessory 2 Ignition switch 5 Red
Parking Lights Headlight switch, Black/White 12 pins 11 Blue
Brake Brake switch 2 Light Green
Hood Pin Hood switch 2 Light Blue
Immo. Data 7-pin immobilizer connector 5 Pink
SW CAN 7-pin immobilizer connector 4 Green
Ignition Ignition switch 5 Yellow
12 Volts Ignition switch 1 White
Starter Ignition switch 3 Red
Accessory 1 Ignition switch 7 Orange
Accessory 2 Ignition switch 6 Red
Parking Lights Headlight switch, 12 pins 8 Gray
BrakeBrake switch or dash fuse box, Green
49 pins, plug D30 White
Hood Pin Dash fuse box, Blue 36 pins, plug A 28 Violet
Immo. Data 7-pin immobilizer connector 2 White
Security Light 7-pin immobilizer connector 5 Blue/Orange
Keyless Entry Data Back of fuse/relay box, Green 17 pins 2 Blue/Orange
Ignition Ignition switch 6 Black/Yellow
12 Volts Ignition switch 3 White
Starter Ignition switch 1 Black/White
Accessory 1 Ignition switch 4 Black/Red
Accessory 2 Ignition switch 5 White/Red
Parking Lights Headlight switch, Gray 16 pins 13 Blue
Brake Brake switch 2 White/Black
Tach Fuel injector 4 2 Yellow
* Vehicles with blue-highlighted wires do NOT have a connector at the ignition switch or headlight switch.
Honda CRV 2007-2011
Honda Element 2003-2011
Honda CR-Z 2011-2012
Rev.: 20151123
Platform: DBALL/DBALL2Firmware: HONDA4
© 2015 Directed. All rights reserved.
Wire jump template
Page 15
Function Connector Location Pin Wire
Immo. Data 7-pin immobilizer connector 2 Lt. Green/Black
Security Light 7-pin immobilizer connector 5 Red/Black
Ignition Ignition switch 6 Black/Yellow
12 Volts Ignition switch 3 White
Starter Ignition switch 1 Black/White
Accessory 1 Ignition switch 4 Yellow/Black
Accessory 2 Ignition switch 5 White/Red
Parking Lights Headlight switch, Gray 16 pins 13 Blue
Brake Brake switch 2 White/Black
Hood Pin Hood switch 2 Green/Black
Tach Fuel injector 4 2 Yellow
Immo. Data 7-pin immobilizer connector 3 Green
SW CAN 7-pin immobilizer connector 4 Light Green
Ignition Ignition switch 6 Yellow
12 Volts Ignition switch 3 White
Starter Ignition switch 1 Pink
Accessory 1 Ignition switch 4 Orange
Accessory 2 Ignition switch 5 Red
Parking Lights Headlight switch, Black/White 12 pins 11 Gray
Brake Brake switch 2 Light Green
Hood Pin Hood switch 2 Violet
Immo. Data 7-pin immobilizer connector 3 Light Green
SW CAN 7-pin immobilizer connector 4 Green
Ignition Ignition switch 6 Yellow
12 Volts Ignition switch 3 White
Starter Ignition switch 1 Red
Accessory 1 Ignition switch 4 Orange
Accessory 2 Ignition switch 5 Red
Parking Lights Headlight switch, Black/White 12 pins 11 Gray
Brake Brake switch 2 White
Hood Pin Hood switch 2 Violet
Tach Fuel injector 4 2 Yellow
Immo. Data 7-pin immobilizer connector 2 Red/Blue
Security Light 7-pin immobilizer connector 5 Blue/Orange
SW CAN Fuse/relay box, Green 21 pins 4 Dk. Green/Orange
Ignition Ignition switch 6 Black/Yellow
12 Volts Ignition switch 3 White
Starter Ignition switch 1 Black/White
Accessory 1 Ignition switch 4 Black/Red
Accessory 2 Ignition switch 5 White/Red
Parking Lights Headlight switch - Red/Black
Brake Brake switch 2 White/Black
Hood Pin Hood switch 2 Green/Black
Tach Fuel injector 4 2 Yellow
* Vehicles with blue-highlighted wires do NOT have a connector at the ignition switch or headlight switch.
Honda Odyssey 2005-2010
Honda Fit 2007-2008
Honda Fit 2009-2013
Honda Insight 2010
Rev.: 20151123
Platform: DBALL/DBALL2Firmware: HONDA4
© 2015 Directed. All rights reserved.
Wire jump template
Page 16
Function Connector Location Pin Wire
Immo. Data 7-pin immobilizer connector 2 Red/Green
Security Light 7-pin immobilizer connector 5 Pink
Keyless Entry DataFront of fuse box, Green 18 pins,
plug H14 Brown
Ignition Ignition switch - Black/Yellow
12 Volts Ignition switch - White
Starter Ignition switch - Black/White
Accessory 1 Ignition switch - Yellow
Accessory 2 Ignition switch - White/Black
Parking Lights Headlight switch, Gray 16 pins 13 Red/Yellow
Brake Brake switch, White 4 pins 2 White/Black
Hood PinDriver multiplex control unit, Green 22
pins6 Yellow
Tach Driver fuse box, Green 10 pins, plug E 4 Blue
Immo. Data 7-pin immobilizer connector 2 Red/Green
Security Light 7-pin immobilizer connector 5 White/Blue
Keyless Entry DataFront of fuse box, Green 18 pins,
plug H14 Brown
Ignition Ignition switch - Black/Yellow
12 Volts Ignition switch - White
Starter Ignition switch - Black/White
Accessory 1 Ignition switch - Yellow
Accessory 2 Ignition switch - White/Black
Parking Lights Headlight switch, Gray 16 pins 13 Red/Yellow
Brake Brake switch, White 4 pins 2 White/Black
Hood PinDriver multiplex control unit, Green 22
pins6 Yellow
Tach Driver fuse box, Green 10 pins, plug E 4 Blue
Immo. Data 7-pin immobilizer connector 2 Red/Blue
Security Light 7-pin immobilizer connector 5 Blue/Orange
SW CAN Fuse/relay box, Green 21 pins 4 Brown/Black
Ignition Ignition switch - Black/Yellow
12 Volts Ignition switch - White
Starter Ignition switch - Black/White
Accessory 1 Ignition switch - Yellow
Accessory 2 Ignition switch - White/Black
Parking Lights Headlight switch, Green 6 pins 4 Blue
Brake Brake switch 2 Light Blue
Hood Pin Hood switch 2 Green/Black
* Vehicles with blue-highlighted wires do NOT have a connector at the ignition switch or headlight switch.
Honda Ridgeline 2006-2013
Honda Pilot EX, EX-L, SE 2005-2008
Honda Pilot LX, VP 2005-2008
Rev.: 20151123
Platform: DBALL/DBALL2Firmware: HONDA4
© 2015 Directed. All rights reserved.
Wire jump template
Module Programming
Refer to the LED Diagnostics section for more information and for troubleshooting purposes.
2
3 Remove the key from the ignition.Key OUT O
FF
START
ON
TYPES 1, 2 & 5:The green LED turns ON for 3 seconds and shuts off. &
OffSolid x3 secs
Turn the key to the ON position.Key IN O
FF
START
ON
TYPES 3, 4 & 6:LED flashes orange. Press push-button 5 times to complete the programming.The orange LED turns ON for 3 seconds and shuts off.
&&OffSolid x3 secsflashes Press x5
Important
1Solid
OR
If required for your installation, connect the 10-pin, 12-pin and 14-pin harnesses to the module, then connect the 4-pin D2D harness.
D2D Installation
W2W Installation
If required for your installation, connect the 10-pin and 12-pin harnesses to the module, then connect the 14-pin harness to the module.
10-pinD2D
st1
12-pin14-pin
nd2
rd3
10-pinD2D
st1
th4
12-pin14-pin
nd2
rd3
You have successfully completed the module programming sequence.
Page 17
Make all the required connections to the vehicle, as described in the wiring diagram(s) found in this guide, and double check to ensure everything is correct prior to moving onto the next step.
Warning! To take advantage of advanced features, you must use XpressVIP 4.5 or higher. Using version 2.9 or 3.1 will limit available functions and features.
1. Connect the interface module to your computer using the XKLoader.
2. Open an Internet Explorer browser (version 6 or higher), and go to www.directechs.com. The detail of the platform and firmware that is currently saved on the interface module will be indicated in the top right corner of the page.
3. Select the year, make and model of the vehicle; the page will refresh to display the compatible firmware.
4. In the search result page, select Flash Standard install, and follow the instructions provided on the screen.5. Once you have configured your options, click on the FLASH button to upload the firmware onto the interface module.6. The following message will be displayed when the upload is completed:
“The flashing is successfully completed. You may now unplug the kit.”You can now proceed with the programming instructions below.
Wait until the LED turns ON solid red.
Rev.: 20151123
Platform: DBALL/DBALL2Firmware: HONDA4
© 2015 Directed. All rights reserved.
Wire jump template
Page 18
2
Solid
&
Solid Flashes
&
Release
3
Wait 3 seconds until the LED turns ON solid orange, and wait 10 more seconds until the LED starts to flash orange and red.
Release the programming button. The LED turns ON solid red.
Warning Against Executing a Hard Reset! A hard reset will revert the flashed firmware back to its default settings. Depending on the installation, some settings (such as RFTD and D2D options) may have to be reconfigured. See the Feature & Option List section of this guide.
1 OR
If required for your installation, connect the 10-pin, 12-pin & 14-pin harnesses to the module. Press and hold the programming button, then connect the 4-pin D2D harness.
D2D Installation
If required for your installation, connect the 10-pin & 12-pin harnesses to the module. Press and hold the programming button, then connect the 14-pin harness to the module.
W2W Installation
10-pinD2D
st1
12-pin14-pin
nd2
th4
rd3
10-pinD2D
st1
th5
12-pin14-pin
nd2
rd3
th4
Module Reset
Hard Reset
2 & &Solid SolidRelease
Wait 3 seconds until the LED turns ON solid orange then release the programming button. The LED then turns ON solid red.
A module reset will only erase programming performed in the previous steps. All settings (firmware) and settings flashed to the module using the web config tool will not be affected.
1 OR
If required for your installation, connect the 10-pin, 12-pin & 14-pin harnesses to the module. Press and hold the programming button, then connect the 4-pin D2D harness.
D2D Installation
If required for your installation, connect the 10-pin & 12-pin harnesses to the module. Press and hold the programming button, then connect the 14-pin harness to the module.
W2W Installation
10-pinD2D
st1
12-pin14-pin
nd2
th4
rd3
10-pinD2D
st1
th5
12-pin14-pin
nd2
rd3
th4
Rev.: 20151123
Platform: DBALL/DBALL2Firmware: HONDA4
© 2015 Directed. All rights reserved.
Wire jump template
Page 19
Feature & Option List
Feat. Operation Flashes / Option Description
1. No RF Output* Module is connected to a remote starter using a standard installation.
2. RFTD Output Module is connected to an XL202 using an RSR or RXT installation (when available).
3. SmartStart Module is connected to SmartStart using an RSR or RXT installation (when available).
1. Driver priority*Unlocks only the driver door when the button is first pressed, and unlocks all doors when
it is pressed a second time within 5 seconds.
2. All Unlocks all doors when the button is first pressed.
1. Trunk* Will pop the trunk if available.
2. Right Sliding Door When available, will operate the right sliding door.
3. Left Sliding Door When available, will operate the left sliding door.
1. Trunk Will pop the trunk if available.
2. Right Sliding Door* When available, will operate the right sliding door.
3. Left Sliding Door When available, will operate the left sliding door.
1. Trunk Will pop the trunk if available.
2. Right Sliding Door When available, will operate the right sliding door.
3. Left Sliding Door* When available, will operate the left sliding door.
1. Disabled
The OEM alarm will not be controlled by the interface upon remote start. No disarm or
arm command will be executed at the beginning or end of the sequence; it must be
controlled by the Remote Starter.
2. Safelock
Smart OEM Alarm Control will behave like a standard Safelock feature on a remote
starter. It will unlock at the beginning of the sequence, and relock after start and
shutdown.
3. Enabled*
Smart OEM Alarm Control will synchronize with the OEM alarm so that it will disarm and
rearm the vehicle in the remote start sequence, only when required. The reason for this
is, factory alarm control must often be done by lock or unlock operation. This could
create unnecessary actions on door lock modules, such as the horn to honk. When
possible, Smart OEM Alarm Control will monitor the alarm and door lock status to detect
if the disarm or rearm is required. If the vehicle is unlocked or is not equipped with
factory alarm, the disarm/rearm will not be executed. Smart OEM Alarm Control will also
monitor the remote starter actions so that the factory alarm control is not done twice. A
remote starter, for which the Safelock feature is active, will work perfectly with this option
and will make it invisible to the user.
4 Aux1
5 Aux2
6 Smart OEM Alarm Control
1 RFTD Output Type
2 Unlock Driver Priority
3 Trunk
It is recommended to configure all the features and options listed below using the configuration tool found on the module flashing page on www.directechs.com. The web offers more options; however, manual configuration of the features is possible using the information on this page.
* Default option
Rev.: 20151123
Platform: DBALL/DBALL2Firmware: HONDA4
© 2015 Directed. All rights reserved.
Wire jump template
To enter feature programming routine- Turn the ignition ON, then OFF. - Within 5 seconds, press and HOLD the programming button until the LED turns ON orange (after 3 seconds). Release the
programming button.- The LED will flash green once slowly to indicate the feature number is 1. After a short delay, the LED flashes red rapidly to indicate
the current option of feature 1 (i.e. 1x green followed by 1x red indicates feature 1 is set to option 1). The flashing sequence will repeat until a new command is entered.
Changing feature options- Press the lock/arm or unlock/disarm button on aftermarket transmitter to change the option of the selected feature. - The LED flashes red rapidly the number of times equal to the current option number. After a short delay, the LED flashes green
slowly the number of times to indicate the current feature. The flashing sequence will repeat until a new command is entered.
Accessing another feature- Press and release the programming button a number of times to advance from the current feature to the next desired feature. - The LED flashes green slowly the number of times equal to the feature number. After a short delay, the LED flashes red rapidly to
indicate the current option of the current feature. The flashing sequence will repeat until a new command is entered.
When the maximum number of features or options is reached, the LED will start flashing again from the first feature or option.
Once a feature is programmed- Other features can be programmed.- The feature programming can be exited.
Exiting feature programming- No activity for 30 seconds; after 30 seconds, the LED will turn ON orange for 2 seconds to confirm the end of the programming
sequence.OR
- Press and HOLD the programming button for 3 seconds. After 3 seconds, the LED will turn ON orange for 2 seconds to confirm the end of the programming sequence.
Feature ProgrammingProgramming
Button
Page 20
Rev.: 20151123
Platform: DBALL/DBALL2Firmware: HONDA4
© 2015 Directed. All rights reserved.
Wire jump template
LED Status Description Troubleshooting
OFF Module has no pow er. Check the pow er connection.
Solid redWaiting to begin the
programming sequence.
Make sure that all the connections are correct (see w iring
diagram).
Flashes green FT CAN detected. Normal operation
Flashes orange Bypass is programmed. Normal operation
Solid green x 3 secondsBypass is programmed w ith
convenience.Normal operation
Solid orange x 3 secondsBypass is programmed w ithout
convenience.Normal operation
Module programming - Error codes
Flashes red x 3 Bypass data not detected.
Check the bypass line connection. If more than one w ire is used,
make sure they are not inverted. Start vehicle using the key to
confirm the OEM equipment is still operational.
External Module Synchronisation
Flashes red, red then
orange x10OBDII feature not supported.
Diagnostic data bus not detected. Some features are not
supported by SmartStart. This can be caused by missing w ire
connections or module hardw are limitation. Refer to the w iring
installation section to check the connections.
Active ground while running (status)
Flashes greenGROUND OUT ON (GWR)
command received.
Otherw ise, the Ground While Running (status) signal w as lost or
w as never received by the module. Commands can come from
RF, D2D or W2W.
Solid red, then flashes
orange
IGNITION ON command
received.
Otherw ise, the ignition signal w as not received by the module. In
a W2W install, it w ill show only if the ignition input w ire is used.
Flashes green quickly START ON command received.Otherw ise, the start signal w as not received by the module. In a
W2W install, it w ill show only if the ignition input w ire is used.
D2D and W2W commands
Flashes orange x 1 LOCK command received.
Flashes orange x 2 UNLOCK command received.
Flashes orange x 3 TRUNK command received.
Flashes orange x 4 AUX1 command received.
Flashes orange x 5 AUX2 command received.
Module programming - Firmware specific
If the bypass module fails to flash, it means the module did not
receive the signal. Commands can come from RF, D2D or W2W.
Solid
OFF
Flashes
Flashesred x3
Flashesgreen
Flashesgreen quickly
Flashesorange x1
Flashesorange x2
Flashesorange x3
Flashesorange x5
Flashesorange x4
Solid red, then flashesorange
Solid red, thenflashes orangex10
Flashes
Solid x3secs
Solid x3secs
Page 21
LED Diagnostics & Troubleshooting
Rev.: 20151123
Platform: DBALL/DBALL2Firmware: HONDA4
© 2015 Directed. All rights reserved.
Wire jump template
Limited One Year Consumer WarrantyPage 22
For a period of ONE YEAR from the date of purchase of a Directed Electronics remote start or security product, Directed Electronics. (“DIRECTED”) promises to the original purchaser, to repair or replace with a comparable reconditioned piece, the security or remote start accessory piece (hereinafter the “Part”), which proves to be defective in workmanship or material under normal use, provided the following conditions are met: the Part was purchased from an authorized DIRECTED dealer; and the Part is returned to DIRECTED, postage prepaid, along with a clear, legible copy of the receipt or bill of sale bearing the following information: consumer’s name, address, telephone number, the authorized licensed dealer’s name and complete product and Part description.
This warranty is nontransferable and is automatically void if the Part has been modified or used in a manner contrary to its intended purpose or the Part has been damaged by accident, unreasonable use, neglect, improper service, installation or other causes not arising out of defect in materials or construction.
TO THE MAXIMUM EXTENT ALLOWED BY LAW, EXCEPT AS STATED ABOVE, ALL WARRANTIES, INCLUDING BUT NOT LIMITED TO EXPRESS WARRANTY, IMPLIED WARRANTY, WARRANTY OF MERCHANTABILITY, FITNESS FOR PARTICULAR PURPOSE AND WARRANTY OF NONINFRINGEMENT OF INTELLECTUAL PROPERTY, ARE EXPRESSLY EXCLUDED; AND DIRECTED NEITHER ASSUMES NOR AUTHORIZES ANY PERSON OR ENTITY TO ASSUME FOR IT ANY DUTY, OBLIGATION OR LIABILITY IN CONNECTION WITH ITS PRODUCTS. DIRECTED HEREBY DISCLAIMS AND HAS ABSOLUTELY NO LIABILITY FOR ANY AND ALL ACTS OF THIRD PARTIES INCLUDING DEALERS OR INSTALLERS. DIRECTED IS NOT OFFERING A GUARANTEE OR INSURANCE AGAINST VANDALISM, DAMAGE, OR THEFT OF THE AUTOMOBILE, ITS PARTS OR CONTENTS, AND DIRECTED HEREBY DISCLAIMS ANY LIABILITY WHATSOEVER, INCLUDING WITHOUT LIMITATION, LIABILITY FOR THEFT, DAMAGE, OR VANDALISM. IN THE EVENT OF A CLAIM OR A DISPUTE INVOLVING DIRECTED OR ITS SUBSIDIARY, THE PROPER VENUE SHALL BE SAN DIEGO COUNTY IN THE STATE OF CALIFORNIA. CALIFORNIA STATE LAWS AND APPLICABLE FEDERAL LAWS SHALL APPLY AND GOVERN THE DISPUTE. THE MAXIMUM RECOVERY UNDER ANY CLAIM AGAINST DIRECTED SHALL BE STRICTLY LIMITED TO THE AUTHORIZED DIRECTED DEALER’S PURCHASE PRICE OF THE PART. DIRECTED SHALL NOT BE RESPONSIBLE FOR ANY DAMAGES WHATSOEVER, INCLUDING BUT NOT LIMITED TO, ANY CONSEQUENTIAL DAMAGES, INCIDENTAL DAMAGES, DAMAGES FOR THE LOSS OF TIME, LOSS OF EARNINGS, COMMERCIAL LOSS, LOSS OF ECONOMIC OPPORTUNITY AND THE LIKE. NOTWITHSTANDING THE ABOVE, THE MANUFACTURER DOES OFFER A LIMITED WARRANTY TO REPLACE OR REPAIR AT DIRECTED’S OPTION THE PART AS DESCRIBED ABOVE.
This warranty only covers Parts sold within the United States of America and Canada. Parts sold outside of the United States of America or Canada are sold “AS-IS” and shall have NO WARRANTY, express or implied. Some states do not allow limitations on how long an implied warranty will last or the exclusion or limitation of incidental or consequential damages. This warranty gives you specific legal rights and you may also have other rights that vary from State to State. DIRECTED does not and has not authorized any person or entity to create for it any other obligation, promise, duty or obligation in connection with this Part.For further details relating to warranty information of Directed products, please visit the support section of DIRECTED’s website at: www.directed.com
920-10012-01 2013-07
This Interface kit / Data Bus Interface part has been tested on the listed vehicles. Other vehicles will be added to the select vehicle list upon completion of compatibility testing. Visit website for latest vehicle application guide. DISCLAIMER: Under no circumstances shall the manufacturer or the distributors of the bypass kit / data bus interface part(s) be held liable for any consequential damages sustained in connection with the part(s) installation. The manufacturer and it’s distributors will not, nor will they authorize any representative or any other individual to assume obligation or liability in relation to the interface kit / data bus interface part(s) other than its replacement. N.B.: Under no circumstances shall the manufacturer and distributors of this product be liable for consequential damages sustained in connection with this product and neither assumes nor authorizes any representative or other person to assume for it any obligation or liability other than the replacement of this product only.
Protected by U.S. Patents: 5,719,551; 6,011,460 B1 *; 6,243,004 B1; 6,249,216 B1; 6,275,147 B1; 6,297,731 B1; 6,346,876 B1; 6,392,534 B1; 6,529,124 B2; 6,696,927 B2; 6,756,885 B1; 6,756,886 B2; 6,771,167 B1; 6,812,829 B1; 6,924,750 B1; 7,010,402 B1; 7,015,830 B1; 7,031,826 B1; 7,046,126 B1; 7,061,137 B1; 7,068,153 B1; 7,205,679 B1; Cdn. Patent: 2,320,248; 2,414,991; 2,415,011; 2,415,023; 2,415,027; 2,415,038; 2,415,041; 2,420,947; 2,426,670; 2,454,089; European Patent: 1,053,128; Pat. Pending: 2,291,306. Made in Canada.
Rev.: 20151123
Platform: DBALL/DBALL2Firmware: HONDA4
© 2015 Directed. All rights reserved.
Wire jump template
Quick Reference Guide
© 2015 Directed. All rights reserved.
Button(s) Actions
Press & hold for 1 second to lock.
Press & hold for 1 second to unlock.
Press & hold for 1 second to remote
start.
Press & hold for 5 seconds to activate
the trunk release (optional).
Press once, then to activate the
right sliding door (optional).*
Press twice, then to activate the
left sliding door (optional).*
Press 3 times, then to activate
the panic mode.
Press once, then to reset the
remote starter runtime.
List of Available Commands
x2 +
x1 +
x3 +
x1 +
* This output is configurable. see your authorized installation center for more information.
Note that the information below is for Viper, Clifford and Python models. Icons and commands may differ depending on the remote brand and model purchased. Refer to your authorized installation center for more information.
Notes
DBALL/DBALL2-HONDA4
�佒L �� A�
佃 呅剆
G畩摥猠�慮�楳�楳灯湩扬敳甠睷w�摡瑡汩湫�潭
块 偐佒
W��T�����单 T A畴潭潴楶攠D慴愠S潬畴楯湳 I湣����
Hyundai Genesis Sedan with Smart Key
©2010DirectedElectronics.Allrightsreserved.
("Push-button Start")
Hyundai proximity key solution