Deflections using Energy Methods
Conservation of energy:
9.1 Work and Energy
Work done by external forces on a material point or a structure is converted to internal work and internal stored energy.
Example: (Spring)
(Ref Chapter 9)
Example: (Trusses)
(for conservative systems)
(for linear spring)
There are multiple (infinitely many) "paths" that the external load can be applied along •
i.e. built up from 0 to P1, P2, P3 (as long as all paths satisfy equilibrium at all points on each path).
For conservative system of forces, total work done is path independent•
i.e. depends only on the initial and final states.
Note:
(for linear material behavior of truss elements)
WorkEnergyMethods Page 1
Example: (Beams)
(for linear moment-curvature relationship)
Note: External work done by a single force or a single moment on a linear system:
Note: External Work done by a force or moment in the presence of another existing force or moment:
WorkEnergyMethods Page 2
Internal strain-energy stored
Axial (for truss members):•
Bending•
For General 3D problems:
(for linear moment-curvature relationship)
WorkEnergyMethods Page 3
Principle of (Real) work and (Real) energy
(for conservative systems)Real external work done = Real internal energy stored
=> only 1 unknown displacement/rotation can be solved for 1 applied force/moment.Note: This principle provides 1 scalar equation for the whole structure
Examples:
Example: A= 0.1 m2 ; E = 210 Gpa ; P = 1KN
A B
C
3 m 4 m
5 m
WorkEnergyMethods Page 4
Example
Find displacements at A and D.
WorkEnergyMethods Page 5
A B
C
3 m
4 m
5 mA B
C
3 m4 m
5 m
Thought experiment: (Principle of Virtual Work using Virtual forces)
External Work
Internal Energy
External (virtual) Work done Total Internal Energy stored (due to virtual stresses)
A B
C
3 m4 m
5 m
This can also be used for horizontal displacement:
WorkEnergyMethods Page 6
Principle of virtual work (using virtual forces)
External virtual work done by
an assumed external virtual force
ONE scalar equation => Gives displacement / rotation at ONE point. •
Need to repeat analysis for different points.•
Can be used to calculate displacements at some key points.•
Note:
Proof:
Virtual Forces and StressesReal displacements and strains
From the principle of (real) work and (real) energy
linear / non-linear structures and elastic / inelastic structures.Note: Principle of Virtual Work is valid for
SUM of Internal virtual work done by
corresponding internal virtual stresses(while undergoing real displacements)
WorkEnergyMethods Page 7
For general 3D problems:
Consider any structure under loads:
Virtual Stress
Real Strain
Virtual Force
Real Displacement
Aside: Principle of Virtual Work (using virtual displacements):
To find an unknown force / reaction for equilibrium.
Virtual Displacement
Real Force
The principle of virtual work using virtual displacements is good for finding forces in equilibrium. It does not give displacements directly. If we can express unknown displacements in terms of corresponding unknown forces, then this method can be used to find those displacements.This with be done later in the stiffness method and it also forms the basis of the Finite element method.
Note:
WorkEnergyMethods Page 8
Method of Virtual Work for Trusses
Applications: (Types of internal real displacements of individual members)
External Loading: •
Temperature changes in 1 or more elements: •
Fabrication errors / changes in length of 1 or more elements:•
To find a specific displacement, apply a virtual force P' at that point.1.
Find virtual internal forces N '2.
Find real internal forces Na.Find real displacements "d" of individual members.b.
For real displacements "d":3.
Apply Principle of virtual work to calculate ∆:4.
WE' = UI'
Assumed Virtual External Force (P') x
UNKNOWN Real External Displacement (∆)
Virtual Internal forces (N')x
Known internal displacements (d)
d = α ∆T L
d = ∆l
In all these cases, the internal displacements d must be very smallcompared to the dimensions of the members.
Note:
WorkEnergyMethods Page 9
Example:
Real
Virtual
WorkEnergyMethods Page 10
Example:
WorkEnergyMethods Page 11
Method of Virtual Work for Beams
To find a deflection apply virtual force P' at that point and in that direction.
To find a slope/rotation apply virtual moment M' at that point and in that direction.
Hibbeler
Example:
WorkEnergyMethods Page 12
Example
WorkEnergyMethods Page 13
Axial•
Shear•
(Virtual Internal Work due to real Axial, Shear, Torsion, Temperature loads)Applications:
PureShear
Example : Consider shear in the previous example
WorkEnergyMethods Page 14
Example
WorkEnergyMethods Page 15
WorkEnergyMethods Page 16
Temperature change across depth of the Beam•
Applications (Continued)
Torsion•
Example: Center deflection:
WorkEnergyMethods Page 17
Principle of Stationary (Extremum) Potential Energy
Given a structure with loads and boundary conditions, and a set of possibly infinitely many (kinematically admissible) deformed configurations, then the actual deformed (equilibrium) configuration is one that extremizes (minimizes/maximizes) total potential energy of the system.
Stationary (extremum) Potential EnergyEquilibriumExample
Note: In order to use this principle to calculate deflections for beams, we need to be able to express the total potential energy of the system Π in terms of displacement functions y(x) and then minimize it with respect to y(x). There are methods called Variational Methods that can do that.
WorkEnergyMethods Page 18
Castigliano's Theorems
Theorem 1:
For an elastic structure (linear / non-linear) with constant temperature and rigid supports:
Castigliano (an Italian railroad engineer) published 2 theorems of Work and Energy that allow us to either calculate unknown forces / reactions in indeterminate structures (1st theorem) or to calculate deflections (2nd theorem).
Note: This theorem can also be derived from the Principle of Stationary (extremum) Potential Energy.
Example
WorkEnergyMethods Page 19
Proof
Theorem 2:
For an linear-elastic structure with constant temperature and rigid supports:
This theorem can also be derived from the Principle of Stationary (extremum) Complementary Energy.
Note:
WorkEnergyMethods Page 20
Corollary: (theorem of least work)
The redundant reaction components of a statically indeterminate structure are such that they make the internal work (strain energy) a minimum.
This can also be used to calculate redundant reactions in indeterminate structures.
Example:
WorkEnergyMethods Page 21
Castigliano's (2nd) Theorem for Trusses
Solution Steps: To calculate ∆i
WorkEnergyMethods Page 22
Example
WorkEnergyMethods Page 23
Castigliano's Theorem for Beams & Frames
(for linear moment-curvature relationship)
WorkEnergyMethods Page 24
Contributions of shear, axial, torsion and temperature can also be accounted for similarly.
Example:
WorkEnergyMethods Page 25
WorkEnergyMethods Page 26