Download - Diamondback Tactical 2011
-
8/3/2019 Diamondback Tactical 2011
1/34
CONCEALABLEARMOR
-
8/3/2019 Diamondback Tactical 2011
2/34
Made in the USA
(800) 882-7667 www. .m
Lightweight Performance, Ultra Flexibility
SYNERGYTM
NIJ .06 CERTIfIEd
-
8/3/2019 Diamondback Tactical 2011
3/34
Diamondback Tactical is certied to ISO 9001/2008 for the design and manufacture of
soft body armor, hard body armor, structural armor systems, portable armor systems
and tactical nylon equipment for law enforcement and military use by NQA, an ANAB
accredited third party registrar.
Contents and information is subject to change without notice.
Nominal Weights Listed.
Certicate Number: 11209
EAC Code: 04 Made in the USA
(800) 882-7667 www. .m
Rev. 4 04.2
Finally, a vest that doesnt make you compromise. The SynergyTM is a hybrid designed vest that is NIJ .06 certied
for lightweight performance and ultra exibility. The Synergy II and IIIA provides protection against a variety of
known threats. In addition, the Synergy IIIA is tested to meet DEA protocol and exceeds military fragmentation
requirements. For a full-spectrum threat stopper, the Synergy allows you to perform your job without worrying about
performance or comfort.
SYNERGYTM
Ftu:
Available in a male and female designHigh performance hybrid design using Honeywell advanced
performance uni-directional ballistic materials
Heat-sealed fabric cover featuring FX1 Technology available
exclusively through Diamondback Tactical
Dynamic carrier offers increased shoulder and waist adjustability
Compatible with all Diamondback Tactical outer tactical carriers
Experience Triple Threat Protection with a 5 x 8 or 7 x 9 KAP
plate (sold separately)
TesTed and MeeTs dea proTocol
- 9MM 124gr FMJ- 9MM 127gr +P+SXT
- .40 S&W 165gr GDHP
addITIonal specIal THreaT TesTInG
- .357 Sig SPEER 125gr GDHP- 9mm Aquila 65gr HP
- 9mm WIN Ranger 127gr SXT HP
- 7.62 X 25 Tokarev FMJ LC
- 5.7 X 28 SS 196 40gr (red tip)
- 5.7 X 28 VMAX 40 gr (blue tip)
FraGMenTaTIon TesTInG
2gr RCC4gr RCC
16gr RCC
17gr RCC
64gr RCC
NOTE: Th thi t it bw i t th sygy (m) Xs6X IIIa onlY
*All level II performance is tested with a 9mm for V501 and .357 Mag for V502
**All level IIIA performance is tested with a .357 Sig for V501 and .44 Mag for V502
nIJ .06 cerTIFIed LEVEL II PERFORMANCE
Gender Male Female
NIJ Number Synergy-II XS6X Synergy-II XS6XF
9mm V50 1735 FPS 1726 FPS
.357 Mag V50 1662 FPS 1693 FPS
Areal Density
Thinness
nIJ .06 cerTIFIed LEVEL IIIA PERFORMANCE
Gender Male Female
NIJ Number Synergy-IIIA XS6X1 Synergy-IIIA XS6XF.1
.357 Sig V50 1797 FPS 1788 FPS
.44 Mag V50 1634 FPS 1658 FPS
Areal Density
Thinness
1.07 lb/ft2
0.79 lb/ft2
0.34 inches
0.19 inches
-
8/3/2019 Diamondback Tactical 2011
4/34(800) 882-7667 www. .
COMMITMENT
&INNOVATION Made in the USA
Diamondback Tactical is certifed to ISO
9001/2008 for the design and manufacture
of body armor and protective equipment fo
law enforcement and military use by NQA, an
ANAB accredited third party registrar.
NFORCE-II S6X-06.1(S A)
PerformAnce At certificAtion
9mm V50 9mm V501807 fps. 1777 fps
551 m/s 542 m/s
2138 rpi 2103 rpi
1.25 in. N/A in.
31.7 mm N/A mm
1660 fps. 1649 fps
506 m/s 503 m/s1964 rpi. 1951 rpi.
1.36 in. N/A in.
34.5 mm N/A mm
357 Mag V50 357 Mag V50
357 Mag V50 357 Mag V50357 Mag 357 Mag
357 Mag BFS 357 Mag BFS
357 Mag BFS 357 Mag BFS
9mm V50 9mm V50
9mm BFS 9mm BFS
9mm BFS 9mm BFS
9mm 9mm
.357 SIG SPEER 125 GR. GOLD DOT HP
.40 S&W SPEER 165 GR. GOLD DOT HP
9MM GECO 124 GR. FMJ
9MM SELLER & BELLOT 115 GR. FMJ
9MM WINCHESTER RANGER 127 GR. SXT HP
1521 FPS
1265 FPS
1366 FPS
1377 FPS
1372 FPS
36 MM
37 MM
33 MM
30 MM
35 MM 1635 FPS
SPeciAl threAt PerformAnce
Body Armor SPecificAtionS
Ballistic Standard NIJ0101.06
NForce-II S6X-06.1
II
0.85 lbft2.
13.52 ozft2
41.26 grams dM2
0.29 in.7.37 mm
Male
Areal Density
Thinness
Gender
Model Number
Threat Level
C1-C5Size Range
-
8/3/2019 Diamondback Tactical 2011
5/34(800) 882-7667 www. .
COMMITMENT
&INNOVATION Made in the USA
Diamondback Tactical is certifed to ISO
9001/2008 for the design and manufacture
of body armor and protective equipment fo
law enforcement and military use by NQA, an
ANAB accredited third party registrar.
17 Grain FSP
2 Grain RCC
4 Grain RCC
16 Grain RCC
64 Grain RCC
2157 FPS
2830 FPS
2694 FPS
2174 FPS
1704 FPS
NFORCE-IIIA MF34-06
(S A)
PerformAnce At certificAtion
357 SIG V50 357 SIG V501854 fps. 1798 fps
565 m/s 548 m/s
1545 rpi 1498 rpi
1.06 in. N/A in.
27 mm N/A mm
1598 fps. 1590 fps
487 m/s 485 m/s
1332 rpi. 1325 rpi.
1.38 in. N/A in.
35 mm N/A mm
44 Mag V50 44 Mag V50
44 Mag V50 44 Mag V50
44 Mag 44 Mag
44 Mag BFS 44 Mag BFS
44 Mag BFS 44 Mag BFS
357 SIG V50 357 SIG V50
357 SIG BFS 357 SIG BFS
357 SIG BFS 357 SIG BFS
357 SIG 357 SIG
.357 SIG SPEER 125 GR. GOLD DOT HP
.40 S&W SPEER 165 GR. GOLD DOT HP
5.7x28 HORNADY V-MAX 40 GR. BLUE TIP
7.62x25 TOKAROV FMJ LEAD CORE
9MM AQUILA 65 GR. HP
9MM GECO 124 GR. FMJ
9MM SELLER & BELLOT 115 GR. FMJ
9MM WINCHESTER RANGER 127 GR. SXT HP
1543 FPS
1271 FPS
1780 FPS
1588 FPS
1905 FPS
1376 FPS
1382 FPS
1365 FPS
31 MM
32 MM
21 MM
29 MM
26 MM
28 MM
27 MM
28 MM 1803 FPS
SPeciAl threAt PerformAnce
Body Armor SPecificAtionS
Ballistic Standard NIJ0101.06
NForce-IIIA MF34-06
IIIA
1.20 lbft2.
19.2 ozft2
58.59 grams dM2
0.327 in.8.31 mm
Male
Areal Density
Thinness
Gender
Model Number
Threat Level
C2-C5Size Range
-
8/3/2019 Diamondback Tactical 2011
6/34(800) 882-7667 www.
COMMITMENT
&INNOVATION Made in the USA
Diamondback Tactical is certifed to ISO
9001/2008 for the design and manufacture
of body armor and protective equipment fo
law enforcement and military use by NQA, an
ANAB accredited third party registrar.
TBL-II XS6XF(S A)
PerformAnce At certificAtion
9mm V50 9mm V501646 fps. 1619 fps.
502m/s 493 m/s
1568 rpi 1542 rpi
1.25 in. N/A in.
31.7 mm N/A mm
1597 fps. 1609 fps.
487 m/s 490 m/s
1521 rpi. 1532 rpi.
1.36 in. N/A in.
34.5 mm N/A mm
357 Mag V50 357 Mag V50
357 Mag V50 357 Mag V50
357 Mag 357 Mag
357 Mag BFS 357 Mag BFS
357 Mag BFS 357 Mag BFS
9mm V50 9mm V50
9mm BFS 9mm BFS
9mm BFS 9mm BFS
9mm 9mm
Body Armor SPecificAtionS
Ballistic Standard NIJ0101.06
TBL-II XS6XF
C1-C5
II
1.05 lbft2.
16.8 ozft2
51.27 grams dM2
0.237 in.6.02 mm
Female
Areal Density
Thinness
Gender
Model Number
Size Range
Threat Level
-
8/3/2019 Diamondback Tactical 2011
7/34(800) 882-7667 www. .
COMMITMENT
&INNOVATION Made in the USA
Diamondback Tactical is certifed to ISO
9001/2008 for the design and manufacture
of body armor and protective equipment fo
law enforcement and military use by NQA, an
ANAB accredited third party registrar.
Performance at certification
357 SIG V50 357 SIG V501828 fps. 1883 fps
557 m/s 574 m/s
1164 rpi 1199 rpi
1.20 in. N/A in.
30.6 mm N/A mm
1659 fps. 1692 fps
506 m/s 516 m/s
1057 rpi. 1078 rpi.
1.51 in. N/A in.
38.4 mm N/A mm
44 Mag V50 44 Mag V50
44 Mag V50 44 Mag V50
44 Mag 44 Mag
44 Mag BFS 44 Mag BFS
44 Mag BFS 44 Mag BFS
357 SIG V50 357 SIG V50
357 SIG BFS 357 SIG BFS
357 SIG BFS 357 SIG BFS
357 SIG 357 SIG
Body armor SPecificationS
Ballistic Standard NIJ0101.06
TBL-IIIA S6X.1
IIIA
1.57 lbft2.
25.12 ozft2
76.65 grams dM2
0.389 in.9.8 mm
Male
Areal Density
Thinness
Gender
Model Number
Threat Level
C2-C5Size Range
TBL-IIIA S6X.1(S a)
-
8/3/2019 Diamondback Tactical 2011
8/34(800) 882-7667 www. .
COMMITMENT
&INNOVATION Made in the USA
Diamondback Tactical is certifed to ISO
9001/2008 for the design and manufacture
of body armor and protective equipment fo
law enforcement and military use by NQA, an
ANAB accredited third party registrar.
Body Armor SpecificAtionS
Ballistic Standard NIJ 0115.00
FCA-K1
KNIFE 1
1.32 lbft2.
21.12 ozft2
64.45 grams dM2
0.35 in.8.89 mm
Male
P1/S1
24-36 Joules
24 Joules
0 mm
36 Joules
-
8/3/2019 Diamondback Tactical 2011
9/34(800) 882-7667 www. .
COMMITMENT
&INNOVATION Made in the USA
Diamondback Tactical is certied to ISO
9001/2008 for the design and manufacture
of body armor and protective equipment fo
law enforcement and military use by NQA, an
ANAB accredited third party registrar.
Body Armor SpecificAtionS
Ballistic Standard NIJ 0115.00
FCA-K2
KNIFE 2
1.65 lbft2.
26.4 ozft2
80.56 grams dM2
0.4 in.10.16 mm
Male
P1/S1
33-50 Joules
33 Joules
0 mm
50 Joules
-
8/3/2019 Diamondback Tactical 2011
10/34(800) 882-7667 www. .
COMMITMENT
&INNOVATION Made in the USA
Diamondback Tactical is certifed to ISO
9001/2008 for the design and manufacture
of body armor and protective equipment fo
law enforcement and military use by NQA, an
ANAB accredited third party registrar.
Body Armor SpecificAtionS
Ballistic Standard NIJ 0115.00
FCA-K3
KNIFE 3
1.98 lbft2.
31.68 ozft2
96.67 grams dM2
0.47 in.11.94 mm
Male
P1/S1
43-65 Joules
43 Joules
0 mm
65 Joules
-
8/3/2019 Diamondback Tactical 2011
11/34(800) 882-7667 www. .
COMMITMENT
&INNOVATION Made in the USA
Diamondback Tactical is certifed to ISO
9001/2008 for the design and manufacture
of body armor and protective equipment fo
law enforcement and military use by NQA, an
ANAB accredited third party registrar.
Body Armor SpecificAtionS
Ballistic Standard NIJ 0115.00
S1FC7
SPIKE 1
0.29 lbft2.
4.64 ozft2
14.16 grams dM2
0.068 in.1.73 mm
Male
SPIKE
24-36 Joules
24 Joules
0 mm
36 Joules
0 mm
Areal Density
Thinness
Gender
Blade Size
Test Energy
Impact Energy 1
Penetration
Impact Energy 2
Penetration 2
Model Number
Threat Level
C1-C5Size Range
S1FC7(S A)
-
8/3/2019 Diamondback Tactical 2011
12/34(800) 882-7667 www. .
COMMITMENT
&INNOVATION Made in the USA
Diamondback Tactical is certifed to ISO
9001/2008 for the design and manufacture
of body armor and protective equipment fo
law enforcement and military use by NQA, an
ANAB accredited third party registrar.
Body Armor SpecificAtionS
Ballistic Standard NIJ 0115.00
S2FC10
SPIKE 2
0.42 lbft2.
6.72 ozft2
20.51 grams dM2
0.097 in.2.46 mm
Male
SPIKE
33-50 Joules
33 Joules
0 mm
50 Joules
0 mm
Areal Density
Thinness
Gender
Blade Size
Test Energy
Impact Energy 1
Penetration
Impact Energy 2
Penetration 2
Model Number
Threat Level
C1-C5Size Range
S2FC10(S A)
-
8/3/2019 Diamondback Tactical 2011
13/34(800) 882-7667 www. .
COMMITMENT
&INNOVATION Made in the USA
Diamondback Tactical is certifed to ISO
9001/2008 for the design and manufacture
of body armor and protective equipment fo
law enforcement and military use by NQA, an
ANAB accredited third party registrar.
Body Armor SpecificAtionS
Ballistic Standard NIJ 0115.00
S3FC16
SPIKE 3
0.67 lbft2.
10.72 ozft2
32.71 grams dM2
0.157 in.3.99 mm
Male
SPIKE
43-65 Joules
43 Joules
0 mm
65 Joules
0 mm
Areal Density
Thinness
Gender
Blade Size
Test Energy
Impact Energy 1
Penetration
Impact Energy 2
Penetration 2
Model Number
Threat Level
C1-C5Size Range
S3FC16(S A)
-
8/3/2019 Diamondback Tactical 2011
14/34
CONCEALABLEACCESSORIES
-
8/3/2019 Diamondback Tactical 2011
15/34(800) 882-7667 www. .com
COMMITMENT
&INNOVATION Made in the USA
Diamondback Tactical is certied to ISO
9001/2008 for the design and manufacture
of body armor and protective equipment fo
law enforcement and military use by NQA, an
ANAB accredited third party registrar.
ABBREVIATED NIJ TESTING OF ADDITIONAL THREATS - STAND ALONE
1134 fps 25 mm
31 mm
12 mm
14 mm
34 mm
21 mm
30 mm
35 mm
26 mm
27 mm
33 mm
29 mm
34 mm
1586 fps
1465 fps
1604 fps
1134 fps
1223 fps
1293 fps
1519 fps
1780 fps
1439 fps
2082 fps
1826 fps
Winchester Ranger 9mm 127 gr. SXT + P +
Aquila 9mm 65 gr. IQ, HP
Aguila 40 S&W 95 gr. IQ HP
Aguila 45 cal. IQ HP
9mm 115 gr. FIOCCHI FMJ
40 S&W 150 gr. CORBON, JHP
45 cal. 165 gr. CORBON +P JHP
357 SIG 115 gr. CORBON
30 cal. 110 gr. CARBINE FMJ
SPEER Gold Dot 357 SIG 125 gr. GDHP
FN5.7x28 Hollow Point
7.62x25 85 gr. FMJ
FN5.7x28 RED TIP 1552 fps
KAP Plate
(Hard Armor)
Ability to be worn in conjunction with concealable accommodating a 5 x 8 plate
pocket. Slides easily into any manufacturers carrier. Instantly upgrades protection
from ballistic-only to edge-weapon and ballistic protection all in one.
TRIPLE THREAT PROTECTION:
ballistic, knife, and spike
All in one trama plate.
FEATuRES: Meets Knife 2 / Spike 1 NIJ
Standards-0115-00
Independent Stand Alone Ballistic
Capabilities (see special threat
rounds listed) Single curve construction conforms
to bodys shape for comfortable
use while in car, on-foot pursuit
and any other on-duty situations
Wafer thin protection for improved
survivability in violent attacks
Built with Fierce Fiber Technology
which allows for high energy
impacts to dissipate across the plate Allows for unparalleled protection unlike any
other product on the market
Also available in a multi-curve for
female ofcers
-
8/3/2019 Diamondback Tactical 2011
16/34(800) 882-7667 www. .m
COMMITMENT
&INNOVATION Made in the USA
Diamondback Tactical is certied to ISO
9001/2008 for the design and manufacture
of body armor and protective equipment fo
law enforcement and military use by NQA, an
ANAB accredited third party registrar.
Qay Aa: Diamondback Tactical maintains quality program certied under the ISO 9001:2008 Quality Assurance Certication. The scope of
certication includes design, manufacture of technologically for advanced personal safety equipment including concealable and tactical bullet resistant
vests, custom body armor, composite armor, ballistic face/head protection, ballistic shields, police and military apparel.
LifeShell Plate(Had Am)
The LifeShell, a double-curved, wafer-thin plate, conforms to the bodys shape
for comfortable on-duty use. Worn with your ballistic vest, the LifeShell offers
instant edge-weapon protection. Its FierceFiber technology allows blunt forc-
es to dissipate across the plate, adding an extra layer of protection on top of
your existing ballistic panel.
This technology from Diamondback Tactical can instantly upgrade your protection from standard ballistic stopping power to spike- and edged-weapon
protection, as tested by an NIJ-approved laboratory, as well as blunt-force trauma protection.
FeAtures:
Meets Spike 1 NIJ 0115.00 Standards
Meets Knife 2 NIJ 0115.00 Standards
Double-curve construction conforms to bodys shape
Wafer-thin protection for improved survivability in violent attacks
Built with Fierce Fiber allowing high-energyimpacts to dissipate
across the plate
Can be worn in conjunction with concealable body armor
Slides into any manufacturers carrier with ease
tecHnicAl speciFicAtions
options:
Sizes: 5 x 8, 7 x 10, 10 x 12, 11 x 13
Color: Black
Max. thk
Aa Dy
sz
Max. Wgh
3.5 mm
1.4 PSF
5 x 8
0.38 lbs 0.56 lbs 0.93 lbs 1.41 lbs
3.5 mm
1.4 PSF
7 x 10
3.5 mm
1.4 PSF
11 x 13
3.5 mm
1.4 PSF
10 x 12
-
8/3/2019 Diamondback Tactical 2011
17/34
CONCEALABLEANDLIGHTTACTICALCARRIERS
-
8/3/2019 Diamondback Tactical 2011
18/34(800) 882-7667 www. .com
COMMITMENT
&INNOVATION Made in the USA
Certicate Number: 11209
EAC Code: 04
Diamondback Tactical is certied to ISO 9001/2008
for the design and manufacture of soft body armor
hard body armor, structural armor systems, por
table armor systems and tactical nylon equipmen
for law enforcement and military use by NQA, an
ANAB accredited third party registrar.
Dynamic Carrier(Armor Carrier)
One of our most advanced carrier designs, the Dynamic carrier accommodates concealable armor panels, while providing
front and back, dual plate pockets for upgraded protection. The Dynamic carrier accommodates the KAP plate, LifeShell
corrections plate and various other steel, titanium or soft armor trauma plates. With a microber outer shell and anti-microbial
mesh inner lining, the Dynamic carrier is offered in a male and female design. Its low-prole design also offers a unique shoul-
der lock system, helping to secure shoulder adjustment.
- Accommodates all Diamondback Tactical concealable armor panels
- Front and back, dual plate pockets for a variety of ballistic, corrections
or multi-threat 5X8 and 7X10 plates (plates sold separately)- Microber outer shell provides comfortable stretch for secure t
- Anti-microbial, moisture-wicking mesh liner
- Male and female design
- Hidden, outer zipper for easy insertion of armor panels
- Shoulder lock system helps secure shoulder adjustment
- Four (4) inch removable, waist straps for side closure
- Sized to t custom armor panels
- Available colors include black, navy and od green
When paired with a 5X8 or 7X10 triple threat KAP plate, the
Dynamic carrier allows an ofcer to upgrade to ballistic protection
of more than 14 special threats, spike 1 protection and stab/knife
2 protection.
Enhanced Front and Back Trauma Protection
Dynamic Duo
(KAP Plate)
-
8/3/2019 Diamondback Tactical 2011
19/34(800) 882-7667 www. .com
COMMITMENT
&INNOVATION Made in the USA
Certicate Number: 11209
EAC Code: 04
Diamondback Tactical is certied to ISO 9001/2008
for the design and manufacture of soft body armor
hard body armor, structural armor systems, por
table armor systems and tactical nylon equipmen
for law enforcement and military use by NQA, an
ANAB accredited third party registrar.
First Responder(Armor Carrier)
The Diamondback Tactical First Responder is an external carrier that provides maximum
load-bearing capabilities using a MOLLE (Modular Lightweight Load-carrying Equipment)
attachment system. This MOLLE-style carrier allows custom pouch conguration from
the Diamondback Tactical line of tactical pouches. With front and back plate pockets to
accommodate 10X12 armor plates, the First Responder offers shoulder and waistadjustability for a secure t.
- Accommodates all Diamondback Tactical concealable armor panels
- 360-degree MOLLE attachment systems (pouches sold separately)
- 500-denier Cordura outer shell for long-lasting durability
- Front and back 10X12 plate pockets (plates sold separately)
- Adjustable, inner cummerbund for secure t
- Sized to t custom armor panels
- Available colors: Black, Navy, Coyote, OD Green, Multi-Cam and ACU
Ultimate Load-Bearing, MOLLE-Style External Carrier
-
8/3/2019 Diamondback Tactical 2011
20/34(800) 882-7667 www. .com
COMMITMENT
&INNOVATION Made in the USA
Certicate Number: 11209
EAC Code: 04
Diamondback Tactical is certied to ISO 9001/2008
for the design and manufacture of soft body armor
hard body armor, structural armor systems, por
table armor systems and tactical nylon equipmen
for law enforcement and military use by NQA, an
ANAB accredited third party registrar.
TAS II(Armor Carrier)
The TAS II (Tactical Assault Shell) is an external carrier that accommodates concealable
armor panels during light tactical operations. Made of a nylon blend outer shell and inner
lining for easy maintenance, the TAS II offers left and right side closure for quick donning.
The TAS II also comes with eight (8) standard sewn-in pouches, a badge holder, small
and large ID attachment system, and mic clip.
- Accommodates all Diamondback Tactical concealable armor panels
- Nylon blend outer shell provides ease of maintenance and repels order
- Adjustable, inner cummerbund for secure t
- Eight (8) standard sewn-in pouches, including:
o Flashlight pouch
o Handcuff pouch
o Double M16 magazine pouch
o 4X8 utility pouch
o 8X8 utility pouch
o Universal radio pouch
o Pepper spray pouch
o Taser holder pouch
- Front and back 10X12 plate pockets (plates sold separately)- Sized to t custom armor panels
- Available colors: Black, Navy and OD Green
Excellent External Carrier for Light Tactical Operations
-
8/3/2019 Diamondback Tactical 2011
21/34(800) 882-7667 www. .com
COMMITMENT
&INNOVATION Made in the USA
Certicate Number: 11209
EAC Code: 04
Diamondback Tactical is certied to ISO 9001/2008
for the design and manufacture of soft body armor
hard body armor, structural armor systems, por
table armor systems and tactical nylon equipmen
for law enforcement and military use by NQA, an
ANAB accredited third party registrar.
Uniform Shirt Carrier(Armor Carrier)
The Diamondback Tactical Uniform Shirt Carrier gives ofcers the opportunity to enjoy the
ease and comfort of an external wear carrier, while also providing the low prole, professional
appearance of a uniform shirt. The Uniform Shirt can accommodate all Diamondback Tactical
concealable armor panels. Also, the Uniform Shirt Carrier offers two (2) full chest pockets, a
badge holder and pen pocket.
- Accommodates all Diamondback Tactical concealable armor panels
- Front, internal plate pocket accommodates 5X8 trauma or KAP
plate
- Poly-cotton outer shell is machine-washable for easy maintenance
- Eight (8) inch side closure system
- Available colors include black and navy
(custom colors available upon request)
Protection in Disguise
-
8/3/2019 Diamondback Tactical 2011
22/34
TACTICALVESTS
-
8/3/2019 Diamondback Tactical 2011
23/34
Made in the USA
(800) 882-7667 www.d .com
Universal Tactical Outer Carrier
UTOCTM
-
8/3/2019 Diamondback Tactical 2011
24/34
Diamondback Tactical is certied to ISO 9001/2008 for the design and manufacture of
soft body armor, hard body armor, structural armor systems, portable armor systems
and tactical nylon equipment for law enforcement and military use by NQA, an ANAB
accredited third party registrar. Certicate Number: 11209
EAC Code: 04 Made in the USA
(800) 882-7667 www. .com
The UTOC carrier was engineered to carry and conceal bulky items and gear, while maintaining a casual appearance. It was
designed with convenience, efciency and durability in mind. This carrier features foam-padded adjustable shoulder straps, as
well as a unique quilted-comfort spacer mesh on the interior for improved air circulation and extended wearability.
UTOCTM
(Universal Tactical Outer Carrier)
Features:
Fully adjustable foam-padded shoulder straps with optional NIJ
level 3A ballistic inserts
Dri-Lex mesh in shoulder straps for extra comfort and moisture
wicking
Padded spacer mesh on vests interior surfaces for maximum
cooling capability
Ambidextrous communications channel
Adjustable cummerbund
Exterior plate pockets
Side armor plate pockets
Front ap pocket with optional available pouches for extra storage
Optional, matched-to-t concealable carrier for ballistic panels
available
May be purchased with QVA-3A ballistic panels that meet the rigid
FBI standard
The UTOC is a custom sized vest
Adjustable cummerbund Side armor plate pockets Padded spacer mesh Communications channel
Available Colors:
ACU BK CRYE CYTDTS RG
Additional ballistic accessorie
and pouches for use in the fron
fap are available. Visit www
diamondbacktactical.com to view
the details.
-
8/3/2019 Diamondback Tactical 2011
25/34
Special Features
Integrated and enlarged front flapcummerbund closure
Reinforced drag handle andDri-Lexadjustable shoulders
Side armor plate pockets Breathable spacer mesh
Additional ballistic accessoand pouches for use in thefront flap are available. Viswww.diamondbacktacticato view the details.
Predator 2, with increased coverage and a higher level of comfort, is far and away the most impressive tactical vest
on the market today.
Predator 2 was designed to meet the needs of operators for an all-encompassing tactical vest with
increased load carry capacity, mobility, speed and ease of adjustability. This vest is NTOA member tested
and recommended.
THE PREDATOR BALLISTIC VEST IS LOADED WITH FEATURES:
SPEAR cut armor for increased ballistic coverage (as used by Special Operations Command)
Enlarged and integrated front flap external cummerbund closure
Low profile front flap pouch for additional carry capacity (sidearm, ammo, etc.)
Super reinforced drag handle
Extended, adjustable, foam-padded shoulder straps with Dri-Lex lining for increased
comfort and moisture wicking
Breathable and durable mesh liner for extra comfort and reduced weight
Side armor plate pockets
Soft armor pockets in external cummerbund
Rigid strength-member along edges of external cummerbund to prevent sagging
SIZES: Small, Medium, Medium/Long, Large, XL, XLL, XXL, XXLLwww.diamondbacktactical.com 800-735-7030
PREDATOR 2
-
8/3/2019 Diamondback Tactical 2011
26/34
made in th
Diamondback Tactical
Fast Attack Plate Carrier Gen II (F.A.P.C-2)
The Gen. II Fast Attack Plate Carrier was designedto meet the needs of operators who want a high
mobility plate carrier with great load carrying
capacity. The F.A.P.C-2 has 1/4" closed cell foam in
both the shoulders and upper torso regions to
relieve load stress on the operators back and
shoulders. It also allows for quick adjustments and
modifications when loads, clothing or operational
positions change. Available options include Side
Cummerbund System, Side Cummerbund Armor
Panels (6x 12), Side Plate Pocket Armor Panels
(6x 8), and Level IIIA Soft Armor Ballistic Inserts.Optional pouches are also available for use in the
front flap.
Sizes: Small, Medium, Large and X-Large
Available Colors:ACU Digital, DTS/ABU Pattern,
Coyote Brown, Ranger Green, CRYE and Black
Level 3A Soft Armor Ballistic Inserts
for the F.A.P.C.-2
CAT-FAPC
800- - www. .com
Optional cummerbund sy
Reinforced drag handle
Textured padding
Integrated front flap poc
Plate pocket
-
8/3/2019 Diamondback Tactical 2011
27/34
made in th
Features
Fully padded shoulders featuring DryLex and a vastly
improved adjustment system
Fully lined with a unique, breathable "spacer" material
allowing increased airflow and reducing thermal load on
the body
An integrated and enlarged front flap cummerbund
closure, featuring a low profile pocket and pouch system
based on the BattleLab Praetorian RCBV and Predator
Gen 2 designs
Improved side closure system featuring "pull forward"
adjustment
Reinforced drag handle
Integrated Soft Armor Ballistics with either
(QVA-3A, LTA-3A or EMA)
Optional Integrated soft armor panels for the shoulders
and armored cummerbund adding increased overall
protection for the wearer.
Optional Accessory Features:
Insertable Low Profile Shoulder Armor Inserts
Insertable Side Ballistic Panels into Cummerbund
Integrated cummerbund for Diamondback Tacticals
patented Side Armor Plate Pocket Design
Advanced Warrior - Fast Attack Plate Carrier (AW-FAPC)
The original F.A.P.C. was a great success with thousands currently
in use by our Military, Law Enforcement, Contractors, Diplomats,OGA, and Coalition Partners. A majority of these customers also
bought the Fast Attack Rack cummerbund system. With that in
mind, we have created a vastly improved Rack system. The all-
new Advanced Warrior Fast Attack Plate Carrier includes the plate
carrier chassis and the cummerbund. It is more comfortable, a
better load carry platform, easier to don and adjust, yet remains
very affordable.
800- - www. .com
-
8/3/2019 Diamondback Tactical 2011
28/34
HARDARMORRIFLEPLATES
-
8/3/2019 Diamondback Tactical 2011
29/34
Diamondback Tactical is certied to ISO 9001/2008 for the design and manufacture of
soft body armor, hard body armor, structural armor systems, portable armor systems
and tactical nylon equipment for law enforcement and military use by NQA, an ANAB
accredited third party registrar. Certicate Number: 11209
EAC Code: 04 Made in the USA
(800) 882-7667 www.diamondbacktactical.com
As a leader in hard armor technology, Diamondback Tactical offers a line of plates capable of defeating high-
powered level III and IV ballistic rie threats. All of our hard armor rie plates are tested to NIJ Standard 2005 Interim
Requirements (2005 IR), and are manufactured from a variety of high-density composites and bers for lightweightcomfort. Upgrade your upper torso protection with state-of-the-art, reliable performance.
HARD ARMOR RIFLE PLATE TECHNOLOGYPrecision and Performance
FEATURES & BENEFITS
VBSS Stand Alone (DY23 III)
THREAT LEVEL Level III
WEIGHT/THICKNESS 3.0 lbs (1.36 kgs) REC; 1.56 inches (40 mm)
AVAILABLE SIZES 10 X 12, 8 X 10, 6 X 8
SHAPE/CURVE Standard or Shooters Cut; Single Curve
COMPOSITE Polyethelene/Fiberglass composite with mil-tuff nish
THREATS 7.62mm X 51mm (NATO) at 2800 fps
FCA-III-01 In Conjunction With (ICW)
THREAT LEVEL Level III in conjunction with all DBT IIIA NIJ .06 vests*
WEIGHT/THICKNESS 3.8 lbs (1.95 kgs) REC; .70 inches (18 mm)
AVAILABLE SIZES 10 X 12 Only
SHAPE/CURVE Standard Cut; Single Curve
COMPOSITE Polyethelene/Fiberglass composite with mil-tuff nish
THREATS/
SPECIAL THREATS
7.62mm X 51mm (NATO) at 2800 fps
7.62mm X 39mm (AK47 MSC) at 2400 fps; 5.56mm X
45mm (SS109 Green Tip and M193 Ball) at 3300 fps
LEVEL III - HARD ARMOR RIFLE PLATES (NIJ 2005 IR)
Hard armor rie plates tested to defeat
NIJ Standard 2005 IR.
High performance composite designs
for reliable performance and comfort.
Durable Mil-Tuff nish for protection
against environmental wear and tear.
Available in 10 X 12, 8 X 10 or
6 X 8 sizes, respectively.
Improved range of motion with optional
shooters cut (trapezoid) style.
In Conjunction With rie plates
available with all DBT level IIIA NIJ .06
certied soft armor.
5-year ballistic material warranty/
18-month workmanship.
VBBS In Conjunction With (ICW)
THREAT LEVEL Level III in conjunction with all DBT IIIA .05 IR/NIJ .06 vests*
WEIGHT/THICKNESS 3.0 lbs (1.36 kgs) REC; .75 inches (19 mm)
AVAILABLE SIZES 10 X 12, 8 X 10, 6 X 8
SHAPE/CURVE Standard or Shooters Cut; Single Curve
COMPOSITE Polyethelene/Fiberglass composite with mil-tuff nish
THREATS 7.62mm X 51mm (NATO) at 2800 fps
MULTI-HIT TESTED
N I J S T A N D A R D
2005 IR
LEVEL IV - HARD ARMOR RIFLE PLATE (NIJ 2005 IR)
THREAT LEVEL Level IV in conjunction with all DBT IIIA NIJ .06 vests*
WEIGHT/THICKNESS 6.6 lbs (2.99 kgs) REC; .50 inches (13 mm)
AVAILABLE SIZES 10 X 12, 8 X 10, 6 X 8
SHAPE/CURVE Standard or Shooters Cut; Single Curve
COMPOSITE Ceramic composite with mil-tuff nish
THREATS/
SPECIAL THREATS
7.62mm X 63mm (30-06 APM2) at 2900 fps
7.62mm X 51mm (NATO) at 2800 fps; 7.62mm X 39mm
(AK47 Black Tip and AK47 MSC) at 2400 fps; 5.56mm X
45mm (SS109 Green Tip and M193 Ball) at 3300 fps
FCA FGIV-ICJW In Conjunction With (ICW)
* original certications tested in conjunction
with (ICW) N-Force MF34-06 level IIIA
-
8/3/2019 Diamondback Tactical 2011
30/34
Diamondback Tactical is certied to ISO 9001/2008 for the design and manufacture of
soft body armor, hard body armor, structural armor systems, portable armor systems
and tactical nylon equipment for law enforcement and military use by NQA, an ANAB
accredited third party registrar. Certicate Number: 11209
EAC Code: 04 Made in the USA
(800) 882-7667 www.diamondbacktactical.com
For years Diamondback has combined innovation and technology to manufacture high-quality, reliable
armor. Now, that same level of quality has been engineered into the KAP III+ hard armor rie plate. The
KAP III+ is tested and certied to the NIJ Standard-0101.06, and is made of heat-compressed layers
of Honeywell unidirectional ballistic bers, with proprietary ceramic infusion technology. The KAP III+
provides level III protection and is independently tested to additional rie threats.
KAP III+ (ICW)NIJ .06 Level III Rife Protection (In Conjunction With NIJ .06 DBT N-Force Level IIIA Vest)
FEATURES & BENEFITS
KAP III+ ICW (In conjunction with NIJ .06 DBT N-Force level IIIA vest)
THREAT LEVEL Level III in conjunction with
(IIIA only
WEIGHT/THICKNESS 4.3 lbs (1.95 kgs) REC; 1.0 inches (25.4 mm)
AVAILABLE SIZES 10 X 12 only
SHAPE/CURVE Standard Cut; Single Curve
COMPOSITE Proprietary ceramic-infused technology with mil-tuff
nish
THREATS/
SPECIAL THREATS
7.62mm X 51mm (NATO) at 2800 fps
7.62mm X 39mm (AK47 MSC) at 2400 fps;5.56mm X 45mm (SS109 Green Tip and M193
Ball) at 3300 fps
Hard armor rie plate tested to defeat NIJ Standard-0101.06.
Heat-compressed design featuring ceramic-infused technology for reliable performance.
In Conjunction With design (must be worn with certied N-Force MF34-06 soft armor).
Available in 10 X 12 size only.
Increased range of motion with optional shooters cut (trapezoid) style.
Durable mil-tuff nish for protection against environmental wear and tear.
5-year ballistic material warranty/ 18-month workmanship.
LEVEL IV - HARD ARMOR RIFLE PLATE (NIJ 0101.06)
III+
RIFLEPROTECTION
-
8/3/2019 Diamondback Tactical 2011
31/34
HARDARMORSHIELDS
-
8/3/2019 Diamondback Tactical 2011
32/34(800) 882-7667 www. .com
COMMITMENT
&INNOVATION Made in the USA
Diamodbak Tatia is tid to ISO
9001/2008 for the design and manufacture
of body armor and protective equipment fo
law enforcement and military use by NQA, an
ANAB accredited third party registrar.
M.U.S.T. Shield
(Multi Us Shild Tchnology)
A hIgher level Of prOTecTIOnFeaTUreS:
Aaiab l III o IIIA
la, mo utioa iw ot
fiams a b doyd om it ad t sids
easi o-u doymt
Sia sa o dud xosu
routioay i systm
easi doymt i od sas
Mitiats iots w doyd o t oud
low adjustab sta o t oam
Tik i dsity oam ad 7 x 11.5 x 1.5 tat
never loses memory Uiqu velcrO attamt systm
Sizs: 24 x 36 o 24 x 48
coos: Bak, rd, Yow
OPTIONS:
rmoab t, is ads ottio
custom tatia ou akas aaiab
leD Stob lit Systm
Itatd Baisti Sid co o taii o
shield deployment, in different colors
hao its
-
8/3/2019 Diamondback Tactical 2011
33/34(800) 882-7667 www. .com
COMMITMENT
&INNOVATION Made in the USA
Diamondback Tactical is ctid to ISO
9001/2008 for the design and manufacture
of body armor and protective equipment fo
law enforcement and military use by NQA, an
ANAB accredited third party registrar.
O.U.T. Shield
(Option in Ubn Tin)
Never OuT Of The fIghT
T O.u.T. (Opations in uban Tain) ballistic nty sild was catd wit as o s
in mind for any team member. This shield can be ordered with or without illumination and
is aailabl in bot Ll III and IIIA.
FeaTUres:
Am paddin
Mltipl it
Aailabl in bot Ll III and IIIA
Ll IIIA: Ti-andl
Ll III: Stait ba andl
OPTIONs:
rtntion staps
Ballistic ision pot 16 x 4
Cay ba
roman-styl andl systm
LeD Stob Lit Systm
Intatd Ballistic Sild Co o tainin o sild
deployment, in different colors
Sizs: 18 x 30, 20 x 36, 20 x 44, 24 x 36, 24 x 48
-
8/3/2019 Diamondback Tactical 2011
34/34
Diamondback Tactical is certied to ISO
9001/2008 for the design and manufacture
of body armor and protective equipment fo
law enforcement and military use by NQA, an
ANAB accredited third party registrar.
This Strobe Light System, installed on Diamondback Tactical
M.U.S.T. or O.U.T. ballistic shields, offers lightweight illumination
that can be deployed for offensive and defensive maneuvers.
LIGHT THE FIGHT!
Strobe light featureS:
Lightweight design, less than one pound total weight
Two operating modes, steady or strobe
Powerful blinding LED light exceeds 90 LUMENS
Light kit can be added to existing M.U.S.T. or O.U.T.
shields manufactured by Diamondback Tactical,
assembly required
Limited workmanship warranty for one year
Strobe light can be ordered installed on M.U.S.T. or
O.U.T. shield
90 minute run time on full battery charge
Battery-powered by four 3-Volt lithium batteries
Ambidextrous hand hold (see inset)
STROBE LIGHT(fs M.u.S.t. nd o.u.t. Sds)
tMtM