Download - Digital Communications Midterm :D
![Page 1: Digital Communications Midterm :D](https://reader036.vdocument.in/reader036/viewer/2022062405/5568553dd8b42a73038b50e0/html5/thumbnails/1.jpg)
DIGITAL TRANSMISSIONCONCEPTS, DATA REPRESENTATION AND OTHER TERMINOLOGIES
![Page 2: Digital Communications Midterm :D](https://reader036.vdocument.in/reader036/viewer/2022062405/5568553dd8b42a73038b50e0/html5/thumbnails/2.jpg)
DIGITAL TRANSMSSION
• IS THE TRANSMITTAL OF DIGITAL PULSES BETWEEN TWO OR MORE POINTS IN THE COMMUNICATION SYSTEM.
![Page 3: Digital Communications Midterm :D](https://reader036.vdocument.in/reader036/viewer/2022062405/5568553dd8b42a73038b50e0/html5/thumbnails/3.jpg)
BINARY TRANSMISSION CONCEPTS AND PRINCIPLES
• BIT CONCEPT- Is a unit of information represented
by either a one or zero.- The bit therefore has one of the two
possible states at any moment in time.
![Page 4: Digital Communications Midterm :D](https://reader036.vdocument.in/reader036/viewer/2022062405/5568553dd8b42a73038b50e0/html5/thumbnails/4.jpg)
BINARY DATA REPRESENTATION
1. BINARY DATA WAVEFORMSa. UPNRZ
Minimum bandwidth
fn=fb/2
Where: fb= input bit rate
0 1 1 10 0
![Page 5: Digital Communications Midterm :D](https://reader036.vdocument.in/reader036/viewer/2022062405/5568553dd8b42a73038b50e0/html5/thumbnails/5.jpg)
BINARY DATA REPRESENTATION
1. BINARY DATA WAVEFORMSb. BPNRZ
Minimum bandwidth
fn=fb/2
Where: fb= input bit rate
0 1 1 10 0
![Page 6: Digital Communications Midterm :D](https://reader036.vdocument.in/reader036/viewer/2022062405/5568553dd8b42a73038b50e0/html5/thumbnails/6.jpg)
BINARY DATA REPRESENTATION
1. BINARY DATA WAVEFORMSc. UPRZ
Minimum bandwidth
fn=fb
Where: fb= input bit rate
0 1 1 10 0
![Page 7: Digital Communications Midterm :D](https://reader036.vdocument.in/reader036/viewer/2022062405/5568553dd8b42a73038b50e0/html5/thumbnails/7.jpg)
BINARY DATA REPRESENTATION
1. BINARY DATA WAVEFORMSd. BPRZ
Minimum bandwidth
fn=fb
Where: fb= input bit rate
0 1 1 10 0
![Page 8: Digital Communications Midterm :D](https://reader036.vdocument.in/reader036/viewer/2022062405/5568553dd8b42a73038b50e0/html5/thumbnails/8.jpg)
BINARY DATA REPRESENTATION
1. BINARY DATA WAVEFORMSe. BPRZ- AMI
Minimum bandwidth
fn=fb /2
Where: fb= input bit rate
0 1 1 10 0
![Page 9: Digital Communications Midterm :D](https://reader036.vdocument.in/reader036/viewer/2022062405/5568553dd8b42a73038b50e0/html5/thumbnails/9.jpg)
BINARY DATA REPRESENTATION
1. BINARY DATA WAVEFORMSf. Digital Biphase, Manchester or Diphase
Minimum bandwidth
fn=fb
Where: fb= input bit rate
0 1 1 10 0
![Page 10: Digital Communications Midterm :D](https://reader036.vdocument.in/reader036/viewer/2022062405/5568553dd8b42a73038b50e0/html5/thumbnails/10.jpg)
BINARY TRANSMISSION CONCEPTS AND PRINCIPLES
• BINARY INFORMATION CODESI. Data Link Control Characters – are used to facilitate the orderly flow of data from a source to a destination.II. Graphic Control Characters – involve the syntax or presentation of the data at the receive terminal.III. Alphanumeric characters- are used to represent the various symbol used for letters, numbers and punctuation in the English language.
![Page 11: Digital Communications Midterm :D](https://reader036.vdocument.in/reader036/viewer/2022062405/5568553dd8b42a73038b50e0/html5/thumbnails/11.jpg)
Information codes or character sets
• Baudot Code- It was developed by French postal
engineer, Thomas Murray in 1875.- is used for low-speed teletype
equipment such as TWX/Telex system
![Page 12: Digital Communications Midterm :D](https://reader036.vdocument.in/reader036/viewer/2022062405/5568553dd8b42a73038b50e0/html5/thumbnails/12.jpg)
Information codes or character sets
• ASCII Code- It is a 7-bit character set which has
128 codes.
![Page 13: Digital Communications Midterm :D](https://reader036.vdocument.in/reader036/viewer/2022062405/5568553dd8b42a73038b50e0/html5/thumbnails/13.jpg)
Information codes or character sets
• EBCDIC- It is an 8-bit character code
developed by IBM and used extensively in IBM and IBM-compatible equipment. It has 256 codes making it the most powerful character set.
![Page 14: Digital Communications Midterm :D](https://reader036.vdocument.in/reader036/viewer/2022062405/5568553dd8b42a73038b50e0/html5/thumbnails/14.jpg)
Binary Transmission Conventions
• Parallel Transmission- In Parallel Transmission, bits are
transmitted character at a time, and each time bit of the set of bits that represent a character has its own wire or line
- An additional wire called Strobe or clock lead notifies the receiver unit that all the bits are present on their respective wires.
![Page 15: Digital Communications Midterm :D](https://reader036.vdocument.in/reader036/viewer/2022062405/5568553dd8b42a73038b50e0/html5/thumbnails/15.jpg)
Binary Transmission Conventions
• Serial Transmission- In Serial Transmission, bits are
transferred over a single line one bit at a time
![Page 16: Digital Communications Midterm :D](https://reader036.vdocument.in/reader036/viewer/2022062405/5568553dd8b42a73038b50e0/html5/thumbnails/16.jpg)
Synchronization on Digital Signals
• Synchronous- The digital transitions in the signals
occur at exactly the same rate- There may, however, be a phase
different between the transitions of the two signals.
![Page 17: Digital Communications Midterm :D](https://reader036.vdocument.in/reader036/viewer/2022062405/5568553dd8b42a73038b50e0/html5/thumbnails/17.jpg)
Synchronization on Digital Signals
• Plesiochronous- There transitions occur at “almost”
the same rate. For example if two networks have their clocks derived from two different PRC’s.
![Page 18: Digital Communications Midterm :D](https://reader036.vdocument.in/reader036/viewer/2022062405/5568553dd8b42a73038b50e0/html5/thumbnails/18.jpg)
Synchronization on Digital Signals
• Asynchronous- The transitions of the signals do not
necessarily occur the same nominal rate.
![Page 19: Digital Communications Midterm :D](https://reader036.vdocument.in/reader036/viewer/2022062405/5568553dd8b42a73038b50e0/html5/thumbnails/19.jpg)
Baseband, Data Rate, and Error Rate
• Baseband- Is defined as the band of frequencies
occupied by the data signal before it modulates a carrier frequency to form the transmitted line or radio signal.
- It is therefore the data signal as it leave or enters a data processing or presentation device.
![Page 20: Digital Communications Midterm :D](https://reader036.vdocument.in/reader036/viewer/2022062405/5568553dd8b42a73038b50e0/html5/thumbnails/20.jpg)
Baseband, Data Rate, and Error Rate
• Data Rate- It is defined as the transmission rate
in bits per second(bps).
- It is constrained by the capability of the transmitting and receiving devices, the bandwidth of the media and a number of electrical impairments typical of each medium.
![Page 21: Digital Communications Midterm :D](https://reader036.vdocument.in/reader036/viewer/2022062405/5568553dd8b42a73038b50e0/html5/thumbnails/21.jpg)
Baseband, Data Rate, and Error Rate
• Error Rate- It is a measure of data connectivity’s
performance.
- Often the unit of measurement is bit error rate (BER), which is the probability of bit error.
![Page 22: Digital Communications Midterm :D](https://reader036.vdocument.in/reader036/viewer/2022062405/5568553dd8b42a73038b50e0/html5/thumbnails/22.jpg)
Digital Transmission Modes
• Simplex- Data transmission is unidirectional;
information can be sent only in one direction
![Page 23: Digital Communications Midterm :D](https://reader036.vdocument.in/reader036/viewer/2022062405/5568553dd8b42a73038b50e0/html5/thumbnails/23.jpg)
Digital Transmission Modes
• Half Duplex(HDX)- Data transmission is possible in both
directions but not at the same time
![Page 24: Digital Communications Midterm :D](https://reader036.vdocument.in/reader036/viewer/2022062405/5568553dd8b42a73038b50e0/html5/thumbnails/24.jpg)
Digital Transmission Modes
• Full Duplex(FDX)- Data transmission is possible in both
directions at the same time but they must be between the same two stations.
![Page 25: Digital Communications Midterm :D](https://reader036.vdocument.in/reader036/viewer/2022062405/5568553dd8b42a73038b50e0/html5/thumbnails/25.jpg)
Digital Transmission Modes
• Full/Full Duplex(F/FDX)- Data transmission is in both
directions at the same time but not between the same two stations
![Page 26: Digital Communications Midterm :D](https://reader036.vdocument.in/reader036/viewer/2022062405/5568553dd8b42a73038b50e0/html5/thumbnails/26.jpg)
Digital Transmission Operation
• Two-Wire Operation- It involves a transmission medium
that either uses two wires (a signal and a reference lead) or a configuration that is equivalent to having only two wires
- With two-wire operation, simplex, half duplex, or full duplex transmission is possible
![Page 27: Digital Communications Midterm :D](https://reader036.vdocument.in/reader036/viewer/2022062405/5568553dd8b42a73038b50e0/html5/thumbnails/27.jpg)
Digital Transmission Operation
• Four-Wire Operation- It involves a transmission medium
that uses four wires (two are used for signals that are propagating in opposite directions and two are used for reference leads) or a configuration that is equivalent to having four wires.
![Page 28: Digital Communications Midterm :D](https://reader036.vdocument.in/reader036/viewer/2022062405/5568553dd8b42a73038b50e0/html5/thumbnails/28.jpg)
Digital Transmission over Voice-Grade Circuits
• Voice-Grade Circuit consists of one or more facilities connected to provide a path for communicating at voice frequency between two or more points.
![Page 29: Digital Communications Midterm :D](https://reader036.vdocument.in/reader036/viewer/2022062405/5568553dd8b42a73038b50e0/html5/thumbnails/29.jpg)
Digital Transmission over Voice-Grade Circuits
• Signal Power and Level- Level in voice circuits is used to
express the relative amount of power at various points in a circuit.
- Power in electrical terms is the rate at which electric energy is taken from or supplied to a device.
![Page 30: Digital Communications Midterm :D](https://reader036.vdocument.in/reader036/viewer/2022062405/5568553dd8b42a73038b50e0/html5/thumbnails/30.jpg)
Digital Transmission over Voice-Grade Circuits
• Transmission Level Point(TLP)- Transmission Level Point is the
ratio(in db) of the power of a signal at the point to the power of the same signal at the reference point
- CCITT recommends-13dBm0 at 0TLP
![Page 31: Digital Communications Midterm :D](https://reader036.vdocument.in/reader036/viewer/2022062405/5568553dd8b42a73038b50e0/html5/thumbnails/31.jpg)
Digital Transmission over Voice-Grade Circuits
• Line Conditioning- Line Conditioning is preparing a line suitable for
transmitting either by adding amplifiers or equalizers to the circuit
- Lines suitable for transmission of high-speed data are provided by conditioning the basic channel
- C Conditioning it is provided on an unconditional channel control attenuation and envelope distortion
- D Conditioning it is provided on an unconditional channel control the S/N ratio and nonlinear distortion
![Page 32: Digital Communications Midterm :D](https://reader036.vdocument.in/reader036/viewer/2022062405/5568553dd8b42a73038b50e0/html5/thumbnails/32.jpg)
Voice-Channel Transmission Impairments
• Amplitude Distortion- Amplitude distortion is called
frequency response by audio enthusiasts
- It is the distortion caused by the variation of transmission loss with frequency
![Page 33: Digital Communications Midterm :D](https://reader036.vdocument.in/reader036/viewer/2022062405/5568553dd8b42a73038b50e0/html5/thumbnails/33.jpg)
Voice-Channel Transmission Impairments
• Phase Distortion- Phase distortion is the resultant of
difference velocities of propagation at different frequencies across the voice channel.
![Page 34: Digital Communications Midterm :D](https://reader036.vdocument.in/reader036/viewer/2022062405/5568553dd8b42a73038b50e0/html5/thumbnails/34.jpg)
Voice-Channel Transmission Impairments
• Noise - It is a spurious or extraneous signal that interferes
with the wanted signala. Thermal Noise it is noise occurring in electric
conductors and resistors resulting from random movement of free electrons contained in the conducting material
b. Intermodulation Noise it is an extraneous signal energy derived from some portion of the wanted energy when the signal is passed through a nonlinear device
c. Impulse Noise it is defined as any burst of noise which exceeds the rms noise level by a given magnitude
![Page 35: Digital Communications Midterm :D](https://reader036.vdocument.in/reader036/viewer/2022062405/5568553dd8b42a73038b50e0/html5/thumbnails/35.jpg)
Voice-Channel Transmission Impairments
• Crosstalk- It is defined as the undesired energy
appearing in one signal path as a result of coupling from another signal path
![Page 36: Digital Communications Midterm :D](https://reader036.vdocument.in/reader036/viewer/2022062405/5568553dd8b42a73038b50e0/html5/thumbnails/36.jpg)
Voice-Channel Transmission Impairments
• Echo- It is the return of a talker’s voice or
other end-user signal- To be an impairment, the returned
signal must suffer some delay
![Page 37: Digital Communications Midterm :D](https://reader036.vdocument.in/reader036/viewer/2022062405/5568553dd8b42a73038b50e0/html5/thumbnails/37.jpg)
Voice-Channel Transmission Impairments
• Singing- It is the result of sustained
oscillations due to positive feedback in amplifying circuits
- Circuits that sing are unusable and promptly overload certain types of multichannel carrier equipment
![Page 38: Digital Communications Midterm :D](https://reader036.vdocument.in/reader036/viewer/2022062405/5568553dd8b42a73038b50e0/html5/thumbnails/38.jpg)
PERIODIC SIGNALS
![Page 39: Digital Communications Midterm :D](https://reader036.vdocument.in/reader036/viewer/2022062405/5568553dd8b42a73038b50e0/html5/thumbnails/39.jpg)
![Page 40: Digital Communications Midterm :D](https://reader036.vdocument.in/reader036/viewer/2022062405/5568553dd8b42a73038b50e0/html5/thumbnails/40.jpg)
![Page 41: Digital Communications Midterm :D](https://reader036.vdocument.in/reader036/viewer/2022062405/5568553dd8b42a73038b50e0/html5/thumbnails/41.jpg)
Frequency Domain Concepts
• Signal usually made up of many frequencies• Components are sine (or cosine) waves• Can be shown (Fourier analysis) that anycontinuous signal is made up of componentsine waves
![Page 42: Digital Communications Midterm :D](https://reader036.vdocument.in/reader036/viewer/2022062405/5568553dd8b42a73038b50e0/html5/thumbnails/42.jpg)
![Page 43: Digital Communications Midterm :D](https://reader036.vdocument.in/reader036/viewer/2022062405/5568553dd8b42a73038b50e0/html5/thumbnails/43.jpg)
ANALOG TRANSMISSION OF DIGITAL DATA
• Analog Transmission occurs when the signal sent over the transmission media continuously varies from one state to another in a wave-like pattern.e.g. telephone networks, originally built for human speech rather than data.
• Advantage for long distance communications: much less attenuation for analog carrier than digital
![Page 44: Digital Communications Midterm :D](https://reader036.vdocument.in/reader036/viewer/2022062405/5568553dd8b42a73038b50e0/html5/thumbnails/44.jpg)
ILLUSTRATE ANALOG TRANSMISSON OF DIGITAL DATA
![Page 45: Digital Communications Midterm :D](https://reader036.vdocument.in/reader036/viewer/2022062405/5568553dd8b42a73038b50e0/html5/thumbnails/45.jpg)
Information Capacity
- Information capacity is a measure of how much information can be propagated through a communication system.
![Page 46: Digital Communications Midterm :D](https://reader036.vdocument.in/reader036/viewer/2022062405/5568553dd8b42a73038b50e0/html5/thumbnails/46.jpg)
M-ary Encoding
- M-ary is a term derived from the word binary. M simply represents a digit that corresponds to the number of conditions, levels, or combinations possible for a given number of binary variables.
- It is therefore the data signal as it leave or enters a data processing or presentation device.
![Page 47: Digital Communications Midterm :D](https://reader036.vdocument.in/reader036/viewer/2022062405/5568553dd8b42a73038b50e0/html5/thumbnails/47.jpg)
Baud and Minimum Bandwidth
• Baud- Is a unit of transmission rate, modulation
rate, or symbol rate and, therefore, the terms symbols per second and baud are often used interchangeably.
- Mathematically, baud is the reciprocal of the time of one output signaling element, and a signaling element may represent several information bits.
![Page 48: Digital Communications Midterm :D](https://reader036.vdocument.in/reader036/viewer/2022062405/5568553dd8b42a73038b50e0/html5/thumbnails/48.jpg)
Baud and Minimum Bandwidth
• Minimum Bandwdith- The minimum theoretical bandwidth
necessary to propagate a signal is called the minimum Nyquist bandwidth.
![Page 49: Digital Communications Midterm :D](https://reader036.vdocument.in/reader036/viewer/2022062405/5568553dd8b42a73038b50e0/html5/thumbnails/49.jpg)
ERROR DETECTION AND CORRECTION TECHNIQUES
![Page 50: Digital Communications Midterm :D](https://reader036.vdocument.in/reader036/viewer/2022062405/5568553dd8b42a73038b50e0/html5/thumbnails/50.jpg)
Error Detection
- It is the process of monitoring the received data and determining when a transmission error has occurred.
![Page 51: Digital Communications Midterm :D](https://reader036.vdocument.in/reader036/viewer/2022062405/5568553dd8b42a73038b50e0/html5/thumbnails/51.jpg)
Error Detection
• Redundancy- It involves transmitting each
character twice.
![Page 52: Digital Communications Midterm :D](https://reader036.vdocument.in/reader036/viewer/2022062405/5568553dd8b42a73038b50e0/html5/thumbnails/52.jpg)
Error Detection
• Exact-Count Encoding- The number of 1’s in each character
is the same to determine if a transmission error has occurred.
![Page 53: Digital Communications Midterm :D](https://reader036.vdocument.in/reader036/viewer/2022062405/5568553dd8b42a73038b50e0/html5/thumbnails/53.jpg)
Error Detection
• Parity- Equivalence of equality. It is the simplest
error detection scheme used for data communications systems and is used with both vertical and horizontal redundancy checking
- A single bit (parity bit) is added to each character to force the total number of 1’s in the character, including the parity bit, to be either an odd number or an even number
![Page 54: Digital Communications Midterm :D](https://reader036.vdocument.in/reader036/viewer/2022062405/5568553dd8b42a73038b50e0/html5/thumbnails/54.jpg)
Error Detection
• VRC- It is an error detection scheme that
uses parity to determine if a transmission error has occurred within a character.
![Page 55: Digital Communications Midterm :D](https://reader036.vdocument.in/reader036/viewer/2022062405/5568553dd8b42a73038b50e0/html5/thumbnails/55.jpg)
Error Detection
• HRC or LRC- It is an error detection scheme that
uses parity to determine if a transmission error has occurred in a message.
![Page 56: Digital Communications Midterm :D](https://reader036.vdocument.in/reader036/viewer/2022062405/5568553dd8b42a73038b50e0/html5/thumbnails/56.jpg)
Error Detection
• CRC- It is the most reliable scheme for
error detection. It is generally used with 8-bit codes such as EBCDIC or 7-bit codes when parity is not used
![Page 57: Digital Communications Midterm :D](https://reader036.vdocument.in/reader036/viewer/2022062405/5568553dd8b42a73038b50e0/html5/thumbnails/57.jpg)
Error Correction
![Page 58: Digital Communications Midterm :D](https://reader036.vdocument.in/reader036/viewer/2022062405/5568553dd8b42a73038b50e0/html5/thumbnails/58.jpg)
Error Correction
• Symbol Substitution- It was designed to be used in a
human environment.
![Page 59: Digital Communications Midterm :D](https://reader036.vdocument.in/reader036/viewer/2022062405/5568553dd8b42a73038b50e0/html5/thumbnails/59.jpg)
Error Correction
• Retransmission- When a message is received and the
receive terminal automatically calls for retransmission of the entire message.
![Page 60: Digital Communications Midterm :D](https://reader036.vdocument.in/reader036/viewer/2022062405/5568553dd8b42a73038b50e0/html5/thumbnails/60.jpg)
Error Correction
- FEC- It is the only error correction scheme
that actually detects and corrects transmission errors at the receive and without calling for retransmission
![Page 61: Digital Communications Midterm :D](https://reader036.vdocument.in/reader036/viewer/2022062405/5568553dd8b42a73038b50e0/html5/thumbnails/61.jpg)
Protocols
![Page 62: Digital Communications Midterm :D](https://reader036.vdocument.in/reader036/viewer/2022062405/5568553dd8b42a73038b50e0/html5/thumbnails/62.jpg)
Protocols
• Bit-Oriented Synchronous Protocols Synchronous Data-Link Control (SDLC) by IBM
I. SDLC Transmission States
- Transient State - an SDLC state that exists before and after the initial transmission and after each line turnaround
- Idle State - - an SDLC state that is presumed after 15 or more consecutive 1’s have been received
- Active State - - an SDLC state exists whenever either the primary or a secondary station is transmitting information or control signals
![Page 63: Digital Communications Midterm :D](https://reader036.vdocument.in/reader036/viewer/2022062405/5568553dd8b42a73038b50e0/html5/thumbnails/63.jpg)
Protocols
• Bit-Oriented Synchronous Protocols Synchronous Data-Link Control (SDLC) by IBM
I. SDLC Frame Fields- Information Field - contains all the transmitted information in an
SDLC frame. The number of bits in this field must be a multiple of 8.- Flag Field - used with SDLC in the same manner that SYN characters
are used with BiSync, to achieve character synchronization. - Address Field – contains 8 bits for unique addresses of each
secondary station. The primary station has no address because all transmissions from secondary stations go to the primary
- Control Field – is an 8-bit field that identifies the type of frame it is. It is used for polling, confirming previously received information frames, and several other data link management functions
- FCS – contains the error detection mechanism for SDLC. This is equivalent to BCC used with BiSync. SDLC uses CRC-16
![Page 64: Digital Communications Midterm :D](https://reader036.vdocument.in/reader036/viewer/2022062405/5568553dd8b42a73038b50e0/html5/thumbnails/64.jpg)
Protocols
• Bit-Oriented Synchronous Protocols Synchronous Data-Link Control (SDLC) by IBM
I. SDLC Frame Formats- Information Frame – the frame used in SDLC that
contains the information field for transmitting sequenced information
- Supervisory Frame– this cannot be used to transfer information but are used to assist in the transfer of information and are also used to confirm previously received information frames, convey ready or busy conditions, and to report frame numbering error
- Unnumbered Frame – are used to send network control and status information
![Page 65: Digital Communications Midterm :D](https://reader036.vdocument.in/reader036/viewer/2022062405/5568553dd8b42a73038b50e0/html5/thumbnails/65.jpg)
Protocols
• Bit-Oriented Synchronous Protocols High-Level Data-Link Control (HDLC) by ISO
I. Standards Combined to form HDLC- ISO 3 309-1976 – this standard defines the frame structure,
delimiting sequence, and transparency mechanism used with HDLC
- ISO 1335-1979 – this standard defines the elements of procedure for HDLC. The control field, information field, and supervisory format have increased capabilities over SDLC
- ISO 7809-1985 – this standard combines previous standards 6159(E) (unbalanced) and 6265(E) (balanced) and outlines the class of operation necessary to establish the link-level protocol
![Page 66: Digital Communications Midterm :D](https://reader036.vdocument.in/reader036/viewer/2022062405/5568553dd8b42a73038b50e0/html5/thumbnails/66.jpg)
Protocols
• Bit-Oriented Synchronous ProtocolsHigh-Level Data-Link Control (HDLC) by ISO
I. HDLC Classes of Operation
- Unbalanced Operation – this class of operation is logically equivalent to a multi-point private line circuit with a polling environment.
- Balanced Operation – this class of operation is logically equivalent to a multi-point private line circuit. Each station has equal data link responsibilities, and channel access is through contention using the asynchronous response mode
![Page 67: Digital Communications Midterm :D](https://reader036.vdocument.in/reader036/viewer/2022062405/5568553dd8b42a73038b50e0/html5/thumbnails/67.jpg)
Protocols
• Bit-Oriented Synchronous ProtocolsHigh-Level Data-Link Control (HDLC) by ISO
I. HDLC Data Transfer Modes- NRM – in this mode a primary station initiates
data transfer to a secondary station. - ARM – in this mode a secondary station my
initiate transmission without receiving a poll from primary station.
- ABM – this is a balanced mode that provides symmetric data transfer capability between combined stations.
![Page 68: Digital Communications Midterm :D](https://reader036.vdocument.in/reader036/viewer/2022062405/5568553dd8b42a73038b50e0/html5/thumbnails/68.jpg)
Protocols
• Byte-Oriented Synchronous ProtocolsSynchronous Data-Link Control
(SDLC) by IBM- With BiSync, each transmission is
preceded by a unique SYN character: 16H for ASCII and 32H for EBCDIC
![Page 69: Digital Communications Midterm :D](https://reader036.vdocument.in/reader036/viewer/2022062405/5568553dd8b42a73038b50e0/html5/thumbnails/69.jpg)
SYNCHRONIZATION
![Page 70: Digital Communications Midterm :D](https://reader036.vdocument.in/reader036/viewer/2022062405/5568553dd8b42a73038b50e0/html5/thumbnails/70.jpg)
Bit Synchronization
- It is achieved through a received clock signal which is coincident with the received serial data stream.
- It is also called clock synchronization
![Page 71: Digital Communications Midterm :D](https://reader036.vdocument.in/reader036/viewer/2022062405/5568553dd8b42a73038b50e0/html5/thumbnails/71.jpg)
Character Synchronization
- It is accomplished by recognizing one or two phasing characters often called SYN or sync characters.
- The receiver senses the SYN’s and phases its receive logic circuits to recognize the beginning and end of each subsequent character by bit count
![Page 72: Digital Communications Midterm :D](https://reader036.vdocument.in/reader036/viewer/2022062405/5568553dd8b42a73038b50e0/html5/thumbnails/72.jpg)
Message Synchronization
- To ensure character synchronization throughout a message, SYN sequences are sometimes inserted in the transmitted data stream
- This technique is called message synchronization and permits receiving stations to verify that they are in synchronization
![Page 73: Digital Communications Midterm :D](https://reader036.vdocument.in/reader036/viewer/2022062405/5568553dd8b42a73038b50e0/html5/thumbnails/73.jpg)
Digital modulation
Understanding different modulation technique
![Page 74: Digital Communications Midterm :D](https://reader036.vdocument.in/reader036/viewer/2022062405/5568553dd8b42a73038b50e0/html5/thumbnails/74.jpg)
Amplitude shift keying• The amplitude of the carrier is changed
in response to information and all else is kept fixed.
• Bit 1 is transmitted by a carrier of one particular amplitude. To transmit 0, we change the amplitude keeping the frequency constant.
• ON-OFF KEYING – is a special form of ASK, where one of the amplitudes is zero .
![Page 75: Digital Communications Midterm :D](https://reader036.vdocument.in/reader036/viewer/2022062405/5568553dd8b42a73038b50e0/html5/thumbnails/75.jpg)
Amplitude shift keying
![Page 76: Digital Communications Midterm :D](https://reader036.vdocument.in/reader036/viewer/2022062405/5568553dd8b42a73038b50e0/html5/thumbnails/76.jpg)
![Page 77: Digital Communications Midterm :D](https://reader036.vdocument.in/reader036/viewer/2022062405/5568553dd8b42a73038b50e0/html5/thumbnails/77.jpg)
frequency shift keying
• The frequency of the carrier is changed in response to the information signal, one particular frequency for a 1 and another frequency for a 0.
• FSK signal is represented by the eqn.
![Page 78: Digital Communications Midterm :D](https://reader036.vdocument.in/reader036/viewer/2022062405/5568553dd8b42a73038b50e0/html5/thumbnails/78.jpg)
frequency shift keying
![Page 79: Digital Communications Midterm :D](https://reader036.vdocument.in/reader036/viewer/2022062405/5568553dd8b42a73038b50e0/html5/thumbnails/79.jpg)
Frequency Shift Keying(FSK)
• Minimum Shift-Keying FSK- MSK is binary FSK except that the
mark and spaces frequencies are synchronized with the input bit rate.
- With MSK, the mark and space frequencies are selected such that they are separated from the center frequency by an odd exact multiple of one-half of the bit rate.
![Page 80: Digital Communications Midterm :D](https://reader036.vdocument.in/reader036/viewer/2022062405/5568553dd8b42a73038b50e0/html5/thumbnails/80.jpg)