tl ll tl'llI'I'
1 (4)Doc. no. 2CDU 504 020 D0201
Rev. ind. 01Date 2009-07-03From Frank RöschDept. DESTO/GMPhone +49 6221 701-629Fax +49 6221 701-724
E-mait [email protected]
E nvi ron mental I nformation
The purpose of this document is to provide environmental information requested in theprocedure for lndustrial rr Enabled level 0.
Product name Weather Sensor, SM
WES/A 2.1
ABB ldentity number 2CDG 120 033 R001 1
lnformation provided by
(Name and e-mail address)
Michael Dürr
m. d uerr@elsner-elektroni k. de
Company
Address
Elsner Elektronik GmbH
Herdweg 7
75391 Gechingen
Date 2009-07-03 ,/Signature ;/l ,{{Mü;^
(Unterschrift)
1. Related documentslndustrial rr Architecture - lntroduction and Definitions, 38SE023904
lndustrial rr Certification Overview, 38SE023905
I ndustrial rr Certification G uideline, 3BS E0 24526
lndustrial rr Enabled Level 0 - lnformation, lntroduction and Definitions, 38SE025934
Ref documents:http://inside.abb.comlThe lnsider/Featured Poftals/lndustrial lT DeploymenU?i ProductCe rtificati o n/D oc u m e nt Li b ra ry
Group Function Sustainability AffairsFtLEJ4/E5Ä 2lEn'/kmmtatkrfmtön_vOz;rtuprnte: O6-11-23-Vorlage-El-/ix-V1-0-2CDuxuuxDo2o1.dotSKELFIoN;SAVEDATE: 07.07.200911:37:00
2 (4)Doc. no. 2CDU 504 020 D0201
Rev. ind, 01Date 2009-07-03
2. Environmental lnformation
2.1 Content of hazardous materialsDeclare the presen ce of hazardous materials in the product. Printed circuit boards aredeclared separately under 2.1.1 and should be excluded from the declaration in the tablebelow.
Material Example application Yes No Quantity/unitootionat ()
Lead Batteries. cables. solderCadmium Batteries. switches. additive in leadMercury Batteries, switchesBervllium Contact sorinosBrominated flameretardants, e.g:PBB, PBDE, TBBPA
Additive in plastics or rubber
HCFCS, e.g:R 22, R 123,R141b
Cooling media
SF6. sulohurhexafluoride BreakersPolwinvl chloride. PVC Cables
(1) Strive to declare the quantity. This is optional, however, since it is today sometimes difficult to retrieve such information,
especially regarding supplied components.
2.1 .l Printed circuit boardsSpecify the amount of printed circuit boards used in the product by declaring the totalboard surface:
tr <1dm2
r' 1-10 dm2
tr >10dm2
n No printed circuit boards used in the product
Group Function Sustainability Affairs
3 (4)Doc. no. 2CDU 504 020 D0201
Rev. ind. 01
Date 2009-07-03
2.2 Recycling informationls recycling information for the product available?
D Yes Ref. Document:............
./ No
lf No, please specify, in the table below, the component/parUphysical position where thematerial is present:
Material GomponenUparUphysical position
LeadCadmiumMercuryBerylliumBrominated flame retardantsHCFCsSF6, sulphurhexafl uoridePolwinvlchloride, PVC
2.3 Energy use and/or losses during the operation of the productls energy use and/or losses during operation of the product specified in the productdocumentation?
./ Yes Ref. Document : Technical data sheet
üNoD Not relevant
Group Function Sustainability Affairs