Download - Doctoral Thesis
Nordbeg-Lokomo 12.12.1999
Technical PublicationsNo. 7
Influence of CrushingProcess Variables onthe Product Quality of
Crushed Rock
1
Eloranta, Jarmo. Influence of Crushing Process Variables to the End Product Quality of Crushed
Rock. Tampere 1995,
UDC
Keywords
ABSTRACT
In many instances rock crushing has considered to be more art than science. One reason for that isthat this industry is on global basis such a small niche, that companies involved have not hadresources and on the other hand also no real need to study what is happening inside the crusher.Recently there has been put more emphasis on issues like the shape of crushed product. Theserequests are stated by end users of aggregates.
Idea to make this thesis is related to author's deep involvement to the development of rock crushingequipment and especially cone and gyratory type of crushers. These crushers are the most criticalones if we think to have maximum impact on end product shape. In the development of conecrushers it is very important to know the impact of different crusher variables to the end productquality. By knowing the impact of different parameters, the basic key development requirements andgoals for the new products can be stated. The basis parameters which can be played with are,providing that rock characteristics can be held constant: feed distribution, crushing cavity type andshape to be used, crusher stroke, speed, setting and choke feeding.
The objective was to clarify the relative importance of these parameters and for this purpose therewere 72 tests made in full scale crushing plant application. From the measured values there werecalculated some clarifying values in order to have wider perspective to interpret the results and drawconclusions.
Based on these tests it can be said that the feed characteristics is the first and most importantdeterminator as to the end product quality. Influence of other parameters is dependable on feedcharacteristics, and is shown in detail in the thesis. This means that although end product quality canbe improved by changing the crusher's operational parameters (stroke, speed, setting, cavity) but theyhardly can compensate poor product shape if crushing process is faulty, meaning wrong feeddistribution to the crusher or crusher is not being choke fed.
In this thesis attempt has been made to incorporate all process- and crusher variables together andthus from wider perspective to rank the influencing parameters to priority order in differentapplications. Although this study has been reasonably extensive, this is still considered to be a basisfor future research and development
2
PREFACE AND ACKNOWLEDGEMENTS
This thesis is done at Nordberg Lokomo in Finland, which belongs to Nordberg Group, the global
leader in developing crushing equipment for construction, mining and recycling industries.
The starting point has been to have most comprehensive approach for the one of the major technical
success criteria for the future: How to produce cubical aggregate. This issue has been studied by
several authors, but this thesis differs from the others by trying to integrate better the influencing
parameters with each others.
The author wishes to express his gratitude to the thesis advisor Professor Asko Riitahuhta, from
Tampere University of Technology.
Professor Heinz Hoberg from the Technical University of Aachen in Germany and Professor Kari
Heiskanen from Helsinki University of Technology have read the manuscript. I am very grateful to
them for the valuable comments and constructive critisism concerning the manuscript.
Also I want to thank Professor Matti Kleimola from Helsinki University of Technology, who has
read and given valuable advice for this thesis.
I want to thank all people within Nordberg organization all over the world who have encouraged,
and helped me to prepare this thesis. Without their contribution this thesis would not be written.
Dipl. Ing Harro von Blotnitz from the the Technical University of Aachen in Germany I want to
thank for both correcting the English language and giving valuable assistance to get this thesis to its
final shape.
Finally I wish to thank my wife Anna-Maija, daughter Elisa and son Martti-Pekka who have also
given their contribution to this thesis.
Tampere November 1995
Jarmo Eloranta
3
Table of Contents
ABSTRACT
PREFACE AND ACKNOWLEDGEMENTS
DEFINITIONS
LIST OF SYMBOLS
1 INTRODUCTION
1.1 Background of the thesis
1.2 Objectives and the scope of the thesis
1.3 Research methods
PART ONE
ISSUES RELATED TO THE PRODUCTION OF CUBICAL PRODUCT
2 INTRODUCTION TO CRUSHING AND CRUSHERS
2.1 Application range for crushers
2.2 General principles of crushing process planning
2.3 Review to different crushers
3 CRITERIA FOR CUBICAL PRODUCT
3.1 Why cubical product is needed
3.2 Review to different standards
4 CRUSHING THEORY IN GENERAL
4.1 Crushing chamber performance
4.1.1 General
4
4.1.2 Crushing phenomena
4.1.3 Influence of bulk density
4.1.4 Other influencing factors
4.1.5 Energy input
4.2 Particle fall through crushing cavity
4.3 Crushing forces in cone & gyratory crushers
5 LITERATURE REVIEW TO PRODUCE CUBICAL PRODUCT
5.1 Background of rock breakdown
5.2 Influence of rock properties
5.3 Impact of crushing parameters
5.3.1 Crushers types
5.3.2 Feed
5.3.3 Crushers' operational parameters
5.3.4 Other factors
PART TWO
RESULTS OF CRUSHING TESTS
6 TEST ARRANGEMENT
6.1 Test program
6.2 Plant configuration and test runs
6.3 Recorded test data
7 BACKGROUND FOR SELECTED PARAMETERS
7.1 Selected parameters
7.2 Number of crushing zones and work stroke
7.3 Impact speed against the rock
7.4 Further clarification of some parameters
8 TEST RESULTS
5
8.1 Results in general
8.2 Analysis systematic
8.2.1 Tests 56-67
8.2.2 All cavities according to each feed
8.2.3 Influence of input parameters
8.3 General summary of tests
9 VERIFICATION OF TEST RESULTS TO PREVIOUS TESTS
10 DISCUSSION
10.1 Evaluation of the validity of results
10.2 Evaluation in respect to previous studies
10.3 Recommendation guidelines with limitations
10.4 Needs for further research
11 CONCLUSIONS
REFERENCES
APPENDICES
Appendix 1: Stone study report
Appendix 2: Plant flow sheet
Appendix 3: Example of power and pressure measurement
Appendix 4: Example of screen analysis
Appendix 5a-c: Feed and product curves
Appendix 6: Example of crushing cavity calculation
Appendix 7: All tests with calculated parameters
Appendix 8: Tests 56-67 classified according to cubicity
Appendix 9: All tests classified according to cubicity
Appendix 10: Tests 56-103 classified according to stroke
Appendix 11: Tests 56-103 classified according to speed
Appendix 12: Tests 56-103 classified according to setting
6
Appendix 13: Tests 104-127
7
DEFINITIONS
The following definitions and terms have been used in this thesis:
Cavity change: The chance of cavity volume between different crushing zones.
Choke feeding: This means that sort of feeding arrangement to the crusher that
cushing cavity keeps full.
Choke point: The point in the crushing cavity where the volume of the material to be
crushed is smallest. This determines the capacity of the crusher.
Closed circuit: Crushing process feature, where part of material produced by crusher
of circulated back to the same crusher to be further crushed.
Cone head: Conical part which supports liner.
Concave: The external part of tools to be used for crushing
Critical speed: Speed is critical, when cone head oscillation speed is the same as the
falling speed of crushed material.
Crushing cavity: The space between liner and concave where crushing action itself
takes place.
Crushing ratio: Ratio between feed and outcoming product. It is normally measured
of 80% point; Crushing ratio = Feed80/Product80. This describes the
work which has been done from feed to product.
Crushing zone: When material is being crushed, it descends through cavity from one
crushing zone to another zone.
8
CSS: Closed side setting, minimum distance between liner and concave at
the discharge end of cavity.
Cubicity: Describes the shape of rock. There are different standards available. In
this thesis DIN standard is being used.
Flakiness index: Descibibes the shape of the rock. Basically same as cubicity.
Interparticular
crushing: Rock crushing takes place against each other and not only against the
crushing tools.
Liner: The inner part of tools to be used for crushing. Fitted on cone head.
Nip angle: Angle between liner and concave when rock is caught, nipped,
between them.
Nominal stroke: See stroke
OSS: Open side setting, maximum distance between liner and concave at
the discharge end of cavity.
Packing: Happens when rock is being compressed so much that its density has
increased so much that it starts to be solid.
Pivot point: The point around which cone head is oscillating, center of the
crusher's top bearing, if such crusher type.
Reduction ratio: Same as crushing ratio.
9
Segregated feed: Feed to the crusher is such that fine and coarse particles in the feed get
to the different side of the crushing cavity.
Shape factor: Same as flakiness index and cubicity.
Stroke: Difference between OSS and CSS.
Work stroke: The distance between CSS and the distance when material compression starts.
10
LIST OF SYMBOLS
A = crushing zone area
C = constant
E = Energy (kWh/t)
N = speed of cone head (RPM)
P = power (kW)
P80 = crushed product (mm, 80% by weight passing)
F80 = feed size (mm, 80% by product passing)
R = distance of crushing zone from centerline
S = stroke (mm)
t = time (s)
V=Y = contact speed against falling speed (m/s)
Y = work stroke (mm)
Wi = work index (kWh/shortton)
W = work in kilowatt hours (kWh)
ρ = material density
σ = tensile stress (N/mm2)
τ = shear stress (N/mm2)
p = compressive stress (N/mm2)
_ = direction of resultant crushing force (deg)
ω = angular speed (1/s)
Subscribts
m = maximum
1,2,N = indices
11
REFERENCES
1. Andreasen, A.H.M., Jensen I.H.: Die Zerkleinerungsmaschinen im Lichte des
Ähnlichkeitsprinzips. VDI-Zeitschrift 96 (1954) Nr.33. [Size reductin machines in respect to
similarity laws]. (In German)
2. Barksdale, R.D., Itani, S.Y.: Influence of Aggegate Shape on Base Behavior.
Transportation Research Record 1227, 1989.
3. Barmac leaflets
4. Bearman, R. A.: The Application of Rock Mechanics Parameters to the Prediction of
crusher performance. PhD, 1991, Camborne School of Mines.
5. Bearman, R.A., Barley R.W., Hitchcock A.: Prediction of Power Consumption and
Product Size in Cone Crushing. Minerals Engineering, Vol.4, No.12, 1991
6. Bern, R.: Kubischer Zuschlagstoff. Qualitätssteuerung durch Prall- und Feinkegelbrecher.
Allis Mineral Systems, 1993. [Cubical aggregates. Quality improvement through impact and cone
crushers]. (In German)
7. Bernotat, S., Schönert K.: Ullmann's Encyclopedia of Industrial Chemistry: 5. Size
Reduction, Vol.B2
8. Bieniawski, Z.T.: Mechanism of Brittle Fracture of Rock. CSIR Report MEG 580,
Pretoria, 1967
9. Bond, F.C.: Third Theory of Comminution. Mining Engineering, May 1952.
10. Bond, F.C.: Control Particle Shape and Size. Chemical Engineering - August 1954.
11. BS 812
1
11 CONCLUSIONS
The extensive tests performed and the analysis based on them supportedthe initial hypothesis of this research in the respect that it would be possible torecognize the major operational factors influencing the shape of crushed product,and to classify these influencing factors in the order of priority. The factors whichwere found to correlate with product shape were:
* Feed gradation* Crusher operational parameters:
- Stroke- Speed- Setting- The length and shape of crushing cavity- Crushing force- Crushing ratio
The most important parameters which were found to have an impact onproduct shape are feed gradation and crusher (work) stroke. The remainingparameters do have an impact but less than these two. The impact of operationalparameters were found to be different or even inverted depending on the feedgradation, and thus the influence of crusher operational parameters has to beevaluated together with feed gradation.
It was found that if feed does not contain enough fines, it is very difficultto compensate fully with other influencing parameters. This means that thecrushing process configuration is very important, because the crushing process asa matter of fact adjusts the correct feed to the crusher. If some of the operationalparameters of crusher cannot be optimally selected for product shape, theadjustments to feed curve can compensate the shortcomings in these parameters.
The impact of stroke actually means both increased compression andimpact speed against the rock. When there were enough fines smaller than thesetting in the feed, the particle shape of the product was good with larger stroke.On the other hand, when the feed did not include fines smaller than the settingthe best particle shape was obtained with smaller stroke. In the first case wherethere were more fines in the feed, the larger stroke caused an effectiveinterparticular crushing effect, and this rounded the particles with poorer shape.So major contribution of larger stroke in improving cubicity relates to utilizationof existing fines in a feed as well as own production of fines for more effectiveinterparticular crushing. In the latter case where there were no fines in the feed,the larger stroke caused a more 'violent' crushing action on the particles and the
2
outcome was a poorer shape, because finer support material as a dampingmaterial was not present. So in this case when the stroke was reduced, thecrushing action became gentler, which improved cubicity. In cases where largerstroke can be used for better cubicity, there is a very important 'by-product':larger stroke gives bigger capacity, or then crusher size could be minimized dueto larger stroke, and this is of course an important economical issue.
Speed variations investigated here did not show any clear influenceregarding the impact on cubicity. If stroke and speed are compared together thereis in both cases an increased impact speed against the rock but work stroke isbigger if nominal stroke is bigger. This seems to mean that impact speed itself isnot so important, but if longer compression distance is involved the joint impactis positive.
Influence of setting can be expressed so that if there are fines in the feedthe changes are improved to achieve higher cubicity values with smaller setting.Setting influences the crushing ratio as well as crushing force. As known, thesemay not be too high if no fines in the feed, and thus it means that better cubicityresults can be expected with wider setting.
The tests gave some indications that the length of the crushing cavity hasto be reduced in those cases where the feed contains fines, because otherwisethere will be a danger of packing. Inversely if feed does not have fines, a longercavity helps to increase the number of crushing zones, and thus it helps toproduce the important fine support material which is missing from the feed.
As to the crushing ratio it was found that particle shape can also be goodwith higher crushing ratios providing that there is enough support material, i.e.fines, in the feed. This also relates to the effective interparticular crushing.
A smaller crushing force helps to improve cubicity, when there are nofines in the feed. The reason is that the crushing action is gentler. If there are finesin the feed the result is exactly the opposite: more force is needed to haveeffective interparticular crushing, because smaller particles need more energy tobreak.
Test results were compared to previous tests with the same crusher and
liners as done at Nordberg-Lokomo's test plant. It was found that the majorparameter, feed, correlate reasonably well with each other, although the rock typewas different.
As a major conclusion it can be said that crusher operational parameterscan influence the product shape within certain limits, but that the most decisivefactor influencing cubicity is feed arrangement, which means that the majoremphasis should be on the crushing process.
3
12
12. Burkhardt, E. S.: Primary Crushers, Factors that affect Capacity. Chapter 22, pages 387-
392. Design and Installation of Comminution Circuits. Mular,A.L., and Jergensen, G.V., co-editors,
1982.
13. Deckers, M.: Möglichkeiten zur Herstellung von Körnungen mit kubischer Kornform.
Aufbereitungtechnik - Nr.2/1974. [Possibilities to produce cubical particle shape]. (In German)
14. DIN 52114: Bestimmung der Kornform bei Schüttgütern mit der Kornform-Schieblehre.
[Determination of grain shape]. (In German)
15. Eibs, M.: Untersuchungen über die grundsätzlichen Möglichkeiten der Kornformver-
besserung in Zerkleinerungsmaschinen. Neue Bergbautechnik, Heft 6, 1977. [Study of possibilities
to improve particle shape with size reduction machines]. (In German)
16. Eloranta, J., Linnola, V., Viilo, K., Teittinen, I., Lehtinen, H.: Crushing Process Planning.
Nordberg Training Manual. 1994
17. Eloranta, J.: Calculation of Crushing Force in Cone Crushers. Nordberg internal report. 6
pages. March 10.1992
18. Flavel, M.D., Rimmer,H.W., Woody,R.N., Schmalzel, M.O.: The Relavance of Efficient
Crushing In Comminution Systems. Society of Mining Engineers of Aime. Presentation at SME-
AIME Annual Meeting, Jan. 1988
19. Flavel, M.D.: Selection and Sizing Of Crushers. Chapter 21, pages 343-383, Design and
Installation of Comminution Circuits. Mular,A.L., and Jergensen, G.V., co-editors, 1982.
20. Flavel, M.D.: Scientific Methods to Design Crushing and Screening Plants. Society of
Mining Engineers. July 1977.
21. Friederichs, K-H.: Die Aufbereitung von Natursteinprodukten. Die Naturstein-Industrie,
13
5/72. [Production of rock products]. (In German)
22. Feinkreiselbrecher zur Erzeugung von kubischem Korn aus Naturstein. Die Naturstein -
Industrie, 4/69. [Cone crusher in production of cubical aggregates]. (In German)
23. Gauldie, K.: The Performance of Jaw Crushers. Engineering, Oct.9.1953
24. Gauldie, K.: The Output of Gyratory Crushers. Engineering, April 30. 1954
25. Griffith, A.A.: The Phenomena of Rupture and Flow in Solids, Phil. Trans. Roy. Soc.,
London, 1921
26. Hedvall, P.: Finkrossning - ett attraktivt alternativ. Konferens i mineralteknik 10-12 febr.
Luleå, Sweden, 1987. [Fine crushing - attractive alternative]. (In Swedish)
27. Heikkilä, P.: ASTO-projektin anti murskausalan yrittäjille ja kiviainestoimittajille.
Esitelmä Murskauspäivät 91. 9-10.5.1991 Jyväskylä. [Outcome of ASTO-project to crushing
enterpreneurs]. (In Finnish)
28. Heikkilä, P.: Improving the Quality of Crushed Rock Aggregate. PhD. Helsinki
University of Technology, 1991
29. Hukki, R.T.: Mineraalitekniikan hienonnus ja rikastus. Teknisten tieteiden akatemia,
Keuruu, 1964. [Grinding and refinement in mineral technology]. (In Finnish)
30. Hukki, R.T.:
31. Höbeda, P.: Stenmaterialets hållfasthet. En värdering av sprödhetstalet. Statens väg- och
trafikinstitut (VTI). Number 260 1981, Linköping, Sweden. [The strength of rock]. (In Swedish)
32. Höbeda, P.: Krossningens betydelse på stenkvalitet, skärskilt med avseende på Kornform.
Literaturstudie. Nr.05001. Statens väg- och trafikinstitut (VTI). 1988, Linköping, Sweden. [Impact
14
of crushing to aggregate quality]. (In Swedish)
33. Höffl, K.: Zerkleinerungs- und Klassiermaschinen. VEB Deutscher Verlag fuer
Grundstoffindustrie, Leipzig 1986. [Particle reduction and classification machines]. (In German)
34. Höller, S.: Aufbereitungsseminar, Internal Nordberg Training, 1992, Macon, France.
35. Jablonski, K.: Classification, Properties and Test of Road Materials. Seminar of 16th
World Road Congress, Vienna 1979
36. Kick, F.: Das Gesetz der Proportionalem Wiederstand und seine Anvendung. 1885,
Leipzig. [The law of resistence and its use]. (In German)
37. Knutsson, J.: Optimale Nutzung von Brechanlagen. Aufbereitungs-Technik, Nr.4/1973.
[Optimal utilization of crushing plants]. (In German)
38. Larnach, M.R.: High-Energy Crushing Technology and its Utilization in Plant Design.
Institute of quarrying transactions. Quarry Management and Products, July 1983.
39. Lehtonen, H.:Development Trends in Crushing Plants. Lokomo Business Days. 1989
40. Liski, E., Puntanen, S.: Tilastotieteen peruskurssi. Tampereen Yliopisto, 1988. [Basic
Course for Statistical Analysis, Univercity of Tampere, Finland, 1988.]. (In Finnish)
41. Lowrison, G.C.: Crushing and Grinding. The size reduction of Solid Materials. London
1974.
42. Malewski,J.: A Comparison of Particle Shape Characteristics of Basalt and Granite
Rocks. Bulletin of the International Assosiation of Engineering Geology, Nr.29, Paris 1984
43. McGrew, B.: Crushing Practice and Theory. Allis-Chalmers, Milwaukee, USA
15
44. Motek, H.: Kubizieren - ein neuer Verfahrensgang in der Splittaufbereitung. Die
Naturstein - Industrie 4/68. [Cubizizing - a new method in aggregate production]. (In German)
45. Motek, H.: Praxis der Hartzerkleinerung, teil 3. Aufbereitungs-Technik - Nr.5/1972.
[Practice in hard rock reduction]. (In German)
46. Mölling, H.A.: Grundfragen der Grobzerkleinerung. Aufbereitungs-Technik, Nr.7/1960.
[Basics in coarse reduction of material size]. (In German)
47. Mölling, H.A.: Beitrag zur Begriffsbestimmung im Zerkleinerungswesen. Aufbereitungs-
Technik Nr.8/1960. [Terminologies in particle reduction]. (In German)
48. NF P 18-561
49. Ollikainen, J.:Report relating to cubicity tests. Internal Nordberg Report. University of
Tampere, 1995
50. Pramstig, A.: Manufacturing Concrete Aggregates with a good Particle Shape. Septieme
Congres des Grandes Barrages, Rome, 1961.
51. Reinhardt, V.: Schlagfester Splitt 8-11 mm oder stabiler Asphaltbeton 0-12 mm.
Bitumen-Teere-Asphalte-Peche und verwandte Stoffe nr.11, 1969. [Impact strenght of aggeregate 8-
11mm or stable asphalt concrete 0-12mm]. (In German)
52. Von Rittinger, P.: Lehrbuch der Aufbereitungskunde, 1867, Berlin. [Manual for
aggregate processing]. (In German)
53. Ruuskanen, J.: Murskausprosessin vaikutus kuulamylly- ja muotoarvoon. Insinöörityö,
Kuopion Teknillinen Oppilaitos, 1995. [The crushing process affecting to the abrasion and shape
value. Engineering study in The Technical College, Kuopio, 1995]. (In Finnish)
54. Schmitz, A.: Herstellung kubischer Splitt mit Kegelbrechern. Aufbereitungstechnik -
16
Nr.3/1973. [Production of cubical aggregates with cone crusher]. (In German)
55. Shergold, F.A.: A Study of the Granulators used in the Production of Roadmaking
Aggregates. Department of Scientific and Industrial Research, Road Research Technical Paper
No.44, London 1959.
56. Shergold, F.A.: Results and Conclusions from Research on Granulators. The Quarry
Managers Journal. April 1961
57. Shergold, F.A., Greysmith, M.G.: Factors Governing the Grading and Shape of Crushed
Rock. The Quarry Managers' Journal, June 1947
58. Suzuki, A., Tanaka T.: Crushing Efficiency in Relation to some operational Variables
and Material Constants. I&EC Process Design and Development, Vol.7, Nr.2, April 1968
59. Svensson, A.: Cubical shape crushing. A better shape for aggregates. Concrete Plant and
Production, April 1990.
60. Svensson, A., Steer, J.F.: New Cone Crusher Technology and Developments in
Comminution Circuits. Minerals Engineering. Vol. 3, No.1/2, 1990
61. Taggart, A.F.: Handbook of Mineral Dressing. USA, 1945
62. Taguchi, G.: Intoduction to Quality Engineering. 1986, Asian Productivity Organization.
63. Tarjan, G.: Mineral Processing, Vol.1. Fundamentals, Comminution, Sizing and
Classification. Akademiai Kiado, Budapest 1981
64. Technische Lieferbedingungen fÜr Mineralstoffe im Strassenbau, TL Min-StB 94.
Forschungsgesellschaft fÜr Strassen- und Verkehrswesen. Bonn 1994. [Technical terms of delivery
of aggeregates to road building]. (In German)
17
65. Test report of G12 cubicity tests. Internal Nordberg-Lokomo report. 1994.
66. Änderung des Verfahrensganges in einem Kieswerk zur Verbesserung der Kornform des
Splittes. Steinbruch and Sandgrube, Berlin-Zelendorf. Heft 3, 1969. [Changes in crushing practice in
order to improve product shape]. (In German)