-
RAPP BOMEK S070D doors are designed and manufactured
to meet the requirement in SOLAS 74 and IMO FTP code.
Hardware and accessories adapted to the door type, on request.
Rapp Bomek AS, N-8012 Bodø, Norway T: +47 75 59 16 00 F: +47 75 59 16 10 E: [email protected] rappbomek.comRev. 06.05.2020
S100D
DOUBLE SLIDING, S100DH-120 FIRE RATED DOOR
Door type code: According to NORSOK C-002, H1 and H2
Door leaf: A double leaf sliding door with a 5mm C-junction inbetween, welded to the
passive door leaf.
The door leafs is constructed of an outer shell of 3 mm thick steel plate on
both sides of an insulating core. The door leaf is internally stiffened and can
be reinforced acc. requirement.
The total leaf thickness is 120 mm.
Door frame: The door frame is made of 5 mm steel plate and the door frame profile is
u-shaped.
Material: The door leaf and frame are made of either mild steel or stainless steel.
Mild Steel finished with NORSOK M501 painting system.
Stainless Steel brushed finished.
Certification: Class societies type approved
Handle: The D-shape handle on the track side is of special Rapp Bomek design and a
recessed type on the opposite track side, the material used is stainless steel.
Gasket: The fire gasket between door leaf and frame is made of silica fibre.
Marking of
product:
To comply with NORSOK C-002, edition 4, chapter 7.10 and 7.16 and DNV�s
requirements for marking of products, the door leaf is provided with a
tag/door sign to fulfill these requirements.
Sound rating: Rw 40dB.
Weight: CO=1500x2200, estimated to 1096 kg
Fire rating: Non-Rated, H0, H60 and H120
Part no.: RBFDS100D
Installation: Bolted installation. The door frame is pre-drilled for bolted installation.
Installation bolts M12x35 with nut,washer, and 3x30mm gasket.
Track house: To protect the rail, rollers and the brake, the door is designed with a track
house, this also to simplify the installation of the door.
For easy access to the rail, rollers and the brakes the track house is designed
with an access cover.
Hang rollers: Each door leafs is connected to the upper rail system at two suspension
points , the rollers are of Rapp Bomek heavy duty design. Each roller is
designed with 4 wheels which gives the door leaf a smooth movement.
The rollers are adjustable and are made of stainless steel.
Rail: The rails is installed inside the track house and are adjustable. The rails and
the rail brackets are of Rapp Bomek design, and made of stainless steel.
Bottom guide and
rollers:
The double sliding door designed with adjustable bottom guides and rollers
matching the door leaf lower edge groove. The guide and rollers are of
Rapp Bomek type and made of stainless steel.
Closing: The door is self closing by the adjustable sloping track mechanism. An
adjustable belt brake is controlling the closing speed of the door leafs.
-
rappbomek.com
Abbreviations: COW COWA COWPCOH SOWSOH
Clear Opening Width Clear Opening Width Active door leaf Clear Opening Width Pasive door leaf Clear Opening Height Structural Opening Width Structural Opening Height
Door move= CowP
Track house length = COW x2 +541
CowAHex.head bolt
M12x35 w/Nutand Washer
Dshape handle
Recessed handle
SOW=COW
CowP
Active DoorleafPassive Doorleaf
Door/tag sign.
Removeable access cover
BB
Base plate = COW + 500
Top rollers
suspensionbrackets
SOH
= C
OH
335
Mounting angle50x5mm
Removeablelifting eye
Removeablelifting eye
Bottom rollers
Bottom rollers
120
80
33
220
Detail of threshold
8Mounting angle50x5mm
48
5
Bottom guide
DOUBLE SLIDING, S100DH-120 FIRE RATED DOOR
22
Section BB
A
A
Section AA
Deck/floor
Bottom rollers andguide.
Hex.head boltM12x35 w/Nut
and Washer
11
00
Door move= CowA + 105
(Pn
eum
.=6
25
)
(Door move,Pneum.= CowA + 120)
(Track house length, pneum. = COW x2 +1100)
Page 1Page 2