DRAFT
Curtin University Internal Signage GuidelinesCurtin University is a trademark of Curtin University of Technology Issue: 08.05.2020
INTERNAL
MAY 2020
SIGNAGEGUIDELINES
Curtin University Internal Signage GuidelinesCurtin University is a trademark of Curtin University of Technology Issue: 08.05.2020 2
CONTENTS
Sign Type Description Page Image
Signage Standard - 1
Directories
DR.1 Directory 12
Wayfinding
WW.1 Wayfinding - Wall Mounted 13
WS.1 Wayfinding - Suspended 14
Description Page
Overview 3
Curtin Logo 4
Typography: Sansa Soft Pro 5
Typography: Helvetica 6
Typography: Univers Condensed 7
Icons 8
Colour 9
Sign Type Description Page Image
Identification
ID.1.1A Identification - 1A (solid door with Latch) 15 & 16
ID.1.1B Identification - Type 1B (solid door with lock) 15 & 17
ID.1.1C Identification - Type 1C (glazed door with mullion) 15 & 18
ID.1.2 Identification - Type 2 (Vinyl Graphics) 19
Miscellaneous
RC.1 Room Capacity 20
Curtin University Internal Signage GuidelinesCurtin University is a trademark of Curtin University of Technology Issue: 08.05.2020 3
CONTENTS
Sign Type Description Page Image
Signage Standard - 2
Wayfinding
WS.2 Wayfinding - Suspended 22
WW.2 Wayfinding - Wall Mounted 24
Identification Signage
ID.2.1A Identification - 1A (solid door with Latch) 26 & 27
ID.2.1B Identification - Type 1B (glazed door) 26 & 28
ID.2.2 Identification - Type 2 (125 Lettering) 29
IDC.2 Identification - Cantilevered 31
Sign Type Description Page Image
Facility Signage
FW.2 Facility - Wall Mounted 32
FC.2 Facility - Cantilevered 35
Statutory
ST.2.1 Statutory - Type 1 (23mm) 36
ST.2.2 Statutory - Type 1 (50mm) 38
FEC.2 Fire Extinguisher - Cantilevered 40
FEW.2 Fire Extinguisher - Wall Mounted 41
Curtin University Internal Signage GuidelinesCurtin University is a trademark of Curtin University of Technology Issue: 08.05.2020 4
Sign Selection
The signage family has been designed to ensure sufficient flexibility, which will suit the majority of Curtin University signage requirements. The internal hierarchy proposed should provide a suitable selection for each user requirements.
The Signage Guideline standards were created to bring harmony, consistency and ensure quality construction replication to appropriately reflect the Curtin University brand image.
Project Specific
This document does not contain a the full list of signage installed at Curtin. If you can’t find what you’re looking for please contact :
Properties, Facilities and Development, Curtin University (08) 9266 2020
Sign Location
Signs must be visible and legible for all users. Sign fixing heights play an important role in the legibility of information.
It is important signs are located where they will not cause any obstruction, or be obscured.
The orientation of the sign will be specific to its purpose and location.
The success of this signage system will be reliant upon compliance with these signage guidelines, and appropriate masterplanning for each Campus.
Use of a Wayfinding Consultant
It is noted some interpretation of the signage design guidelines will be required to suit unique requirements of a particular project and may require the assistance from a qualified wayfinding consultant.
Refer to the Technical Stakeholder for Signage if you require contact details of Consultants who have worked for the University.
Materials, Finishes & Fixings
The signage design and material selection was carefully considered.
The finish of the sign face can have a significant impact on the legibility of information. The proximity of light sources to signs can also play an important role and gloss factors must be considered when specifying materials.
Good quality materials, finishes and fixtures should be selected to ensure longevity and a lasting quality appearance.
The nominated signage contractor must comply with the design intent drawings specified in this signage manual to ensure a consistent and high quality result. Any alteration or amendment to these drawings will require consultation and approval before production.
The signage family is a combination of non-proprietary and proprietary signage items. All internal proprietary signage items have been documented in the following pages.
Quality Assurance
Experience
> Signage contractors shall provide evidence that they have a minimum of 5 years experience, and are currently and regularly manufacturing signs similar to those specified in this Manual. Signage contractors will be required to demonstrate experience when quoting on project works.
Planning, Production & Installation
> Manufacturer’s Product Data sheets and shop drawings shall be required for each item specified, for approval by Curtin University prior to fabrication.
> All items in schedules are to be checked. The signage contractor is to provide an updated message list for each sign, including exact room name, room number, graphic symbol (if any) and Braille (toilet signs only), and indicate the location of each sign on a floor plan.
> Samples shall be specifically required for non-specified products submitted as a substitution to the signage items documented (if approved by the project team).
> Signage items are to be installed at the correct heights documented in this signage manual. Any deviations due to service clashes are required to be approved prior to installation.
Delivery & Storage
All signage items must be stored and delivered in protective packaging. Replacement of damaged items will be required.
The signage family has been designed to ensure sufficient flexibility, which will suit the majority of Curtin University signage requirements. These Internal Signage Guidelines were created to bring harmony, consistency and ensure quality construction replication to appropriately reflect the Curtin University brand image.
OVERVIEW
Curtin University Internal Signage GuidelinesCurtin University is a trademark of Curtin University of Technology Issue: 08.05.2020 5
CURTIN LOGO
The corporate Curtin logo is a very important asset of the organisation. It provides a legal trademark and guarantee of quality for all the products and services that carry the mark. It is also the visual expression of the brand and as such must be valued and used in accordance with these signage guidelines.
The corporate logo is made up of two elements, locked together in a predefined arrangement:
1. The name ‘Curtin University’ within the black bar
2. The ‘shield’
It should never be altered from its original format or embellished with other symbols or colours.
The minimum length the logo can be used is 25.
It is available electronically upon request from University Marketing, email: [email protected]
>> Principle
The Curtin University logo typically appears in reverse on signage elements.
Curtin logo - Colour positive Curtin logo - Colour positive with keyline
In some instances the Curtin full-colour keyline logo needs to be applied to differentiate the logo from the background.
File Name
Logo_CurtinUni_PMS125.eps
2. The name ‘Curtin University’ within the black bar2. The name ‘Curtin University’ within the black bar1. The ‘shield’
Minimum size: 25
25
2. The name ‘Curtin University’ within the black bar1. The ‘shield’
18
Curtin master brandcontinued
Where it is not possible to use the full-colour logo, select Curtin logo mono positive.
On light backgrounds where the tonal value is below 80 per cent, the mono positive version should be used.
Curtin logo – mono positiveFor use in monochromatic applications
Curtin logo – mono positive with keylineFor use in monochromatic applications
The minimum allowable contrast between the logo and background should be at least 80 per cent tonal value.
To access Curtin logo assets, visit the brand site, brand.curtin.edu.au
The name ‘Curtin University’ within the black bar
The ‘shield’ The ‘shield’
The name ‘Curtin University’ within the black bar
20% 30% 40% 50% 60% 70% 80% 90%10%0% 100%
Curtin University Internal Signage GuidelinesCurtin University is a trademark of Curtin University of Technology Issue: 08.05.2020 6
TYPOGRAPHY:SANSA SOFT PRO
The type family Curtin Sansa Soft Pro has been specially developed for use in marketing counications and signage by Curtin.
The Curtin Sansa Soft Pro normal has been selected for the primary content of all identification signage and projects the contemporary values of Curtin.
This typeface is elegant, practical and satisfies fully functional and connotative requirements. It is effective in signage and its clarity and legibility helps convey a distinctive corporate identity through its modern, sophisticated, elegant, international look. It is easily recognisable and expresses both practicality and humanism and complement contemporary design values.
Upper case and lower case are used to create a typographic hierarchy. Upper case is used for all headings, primary and secondary with operational information illustrated in lower case.
Curtin Sansa Soft Pro Normal is used on most signage applications.
>> Principle
Curtin Sansa Soft Pro Normal is used on signtypes within Signage Standard - 2.
Sansa Soft Pro NormalabcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ1234567890 (&.,!?’]-%$*@
Sansa Soft Pro BoldabcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ1234567890 (&.,!?’]-%$*@
Curtin University Internal Signage GuidelinesCurtin University is a trademark of Curtin University of Technology Issue: 08.05.2020 7
TYPOGRAPHY:HELVETICA
>> Principle
Helvetica is used on signtypes within Signage Standard - 1 Helvetica
abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ1234567890 (&.,!?’]-%$*@
Helvetica BoldabcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ1234567890 (&.,!?’]-%$*@
Curtin University Internal Signage GuidelinesCurtin University is a trademark of Curtin University of Technology Issue: 08.05.2020 8
TYPOGRAPHY:UNIVERS CONDENSED
>> Principle
Univers Condensed is used on signtypes within Signage Standard - 1
Univers CondensedabcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ1234567890 (&.,!?’]-%$*@
Univers Bold CondensedabcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ1234567890 (&.,!?’]-%$*@
Curtin University Internal Signage GuidelinesCurtin University is a trademark of Curtin University of Technology Issue: 08.05.2020 9
The following internationally recognised icons should appear uniformly throughout the Curtin University signage system.
Refer to the following pages for details relating to placement and sizing for each signtype.
Any new additional icons not shown opposite are required to be submitted to Curtin University for approval prior to use on any signage elements.
>> Principle
Only use a symbol if users will already know its meaning when they enter, without anyone needing to explain it.
Icons appear on signage with an outline to reveal the background colour of the sign.
Unisex Female Male
ICONS
Accessible Accessible
Stair Mobility Scooter Parking
Baby ChangeLift
Female Male Shower
All Gender Parents Room
First Aid
Curtin University Internal Signage GuidelinesCurtin University is a trademark of Curtin University of Technology Issue: 08.05.2020 10
COLOUR
Whenever reproducing colour always refer to the appropriate colour specifications for the chosen media, relying on PANTONE chips or the current PANTONE colours standard listed in the latest edition of the PANTONE Colour Formula Guide to match colour.
The specifications here cover most print and on-screen requirements.
Curtin Grey Curtin Gold Curtin Black White
Spot Colour Coated Paper Pantone Cool Grey 8C Pantone 125C Pantone Process Black C White Uncoated Paper Pantone Cool Grey 8U Pantone 125U Pantone Process Black U
Process Colour C 0 C 0 C 0 C 0 M 0 M 23.5 M 0 M 0 Y 0 Y 100 Y 0 Y 0 K 40 K 27.5 K 100 K 0
RGB R 145 R 181 R 61 G 146 G 140 G 51 B 150 B 10 B 43
Web safe Hex # 999999 Hex # B58B0B Hex # 000000
Dulux Colour (or match) Flooded Gum PG2C3 Balsam Pear P16 F9 Black PG1 A9 Vivid White
Vinyl Colours Calon Medium Grey 50 Calon Gold Metallic 04 Calon Black 03 Calon Matt White Vinyl OR Calon Imitation Gold 59 OR Matt Black 40
Curtin University Internal Signage GuidelinesCurtin University is a trademark of Curtin University of Technology Issue: 08.05.2020 11
SIGNAGE STANDARD - 1
1
Curtin University Internal Signage GuidelinesCurtin University is a trademark of Curtin University of Technology Issue: 08.05.2020 12
DR.1 DIRECTORY
Front Elevation
Scale 1:10
S2K Architectural Modular Series - 3000 Series Slats
740
105
861
105
42
45 4555
Optional Header
Charcoal Metallic background with Anodised Aluminium text showing through @55 high
Charcoal Metallic background with Anodised Aluminium text showing through @22 high
Charcoal Metallic vinyl text @22 high
Office of the Pro Vice-Chancellor 4 Pro Vice-Chancellor Faculty Business Manager Dean, Teaching and Learning Dean, Research and Graduate Studies Dean, InternationalFaculty Student Services Office (FSSO) 2
ATN Centre for Metabolic Fitness 4WACHPR (WA Centre for Health Promotion Research) 4Reception and Aministration 3Head of School 3Centre for Food Science Research 3Kagawa Nutrition University 3C-MARC (Curtin-Monash Accident Research Centre) 2School Laboratories 1
CHIRI Director 4Centre for International Health 4Centre for Chronic Disease Research 2Centre for Population Health Research 2
Font
Univers Bold Condensed 210pt
Font
Univers Bold Condensed 86pt
FACULTY OF HEALTH SCIENCES
Font
Univers Bold Condensed 86pt
FACULTY OFFICES SCHOOL OF PUBLIC HEALTH
Office of the Pro Vice-Chancellor 4 Pro Vice-Chancellor Faculty Business Manager Dean, Teaching and Learning Dean, Research and Graduate Studies Dean, InternationalFaculty Student Services Office (FSSO) 2
ATN Centre for Metabolic Fitness 4WACHPR (WA Centre for Health Promotion Research) 4Reception and Aministration 3Head of School 3Centre for Food Science Research 3Kagawa Nutrition University 3C-MARC (Curtin-Monash Accident Research Centre) 2School Laboratories 1
CHIRI Director 4Centre for International Health 4Centre for Chronic Disease Research 2Centre for Population Health Research 2
FACULTY OF HEALTH SCIENCES
FACULTY OFFICES SCHOOL OF PUBLIC HEALTH
Photo ReferenceS
Installation Guide
Scale 1:20
1600 centreline
Curtin University Internal Signage GuidelinesCurtin University is a trademark of Curtin University of Technology Issue: 08.05.2020 13
Photo ReferenceS
Room 351 CBS Service TeamRooms 305-320 & 342-345Rooms 302 & 333-348
Installation Guide
Scale 1:20
Setup principle also applies to Type 1 Primary Directory
Front Elevation
Scale 1:5
S2K Architectural Modular Series - 3000 Series Slats
740
1600 centreline
Charcoal Metallic background with Anodised Aluminium text showing through @22 high
Charcoal Metallic vinyl text @22 high
Room 351 CBS Service TeamRooms 305-320 & 342-345Rooms 302 & 333-348
105
42
42
42
LEVEL 2
LEVEL 2
Font
Univers Bold Condensed 86pt
Font
Univers Bold Condensed 86pt
WW.1WAYFINDING - WALL MOUNTED
Curtin University Internal Signage GuidelinesCurtin University is a trademark of Curtin University of Technology Issue: 08.05.2020 14
Room 351 CBS Service TeamRooms 305-320 & 342-345Rooms 302 & 333-348
WS.1WAYFINDING - SUSPENDED
Room 351 CBS Service TeamRooms 305-320 & 342-345Rooms 302 & 333-348
740
Installation Guide
Scale 1:20
ceiling
ground
ceiling
Minimum 2400 to the underside
Check with client if this is not possible
Charcoal Metallic background with Anodised Aluminium text showing through @22 high
Charcoal Metallic vinyl text @22 high
Info maybe double sided, ensure arrow directions
LEVEL 2 LEVEL 2
Font
Univers Bold Condensed 86pt
Font
Univers Bold Condensed 86pt
Front Elevation
Scale 1:5
S2K Architectural Modular Series - 3000 Series Slats
105
42
42
42
Photo ReferenceS
Curtin University Internal Signage GuidelinesCurtin University is a trademark of Curtin University of Technology Issue: 08.05.2020 15
Front Elevation - Left Aligned Handle
Scale 1:5
Front Elevation - Right Aligned Handle
Scale 1:5
90 (FIXED) 600 (VARIES)Currently not all doors have the same length name plate holder.
Confirm on site for each door application
centrecentre
690 (VARIES)As per note above
32 CHEMISTRY LABORATORY
CHEMISTRY LABORATORY
125
125
Font: Not all buildings have the same font. Contractor to confirm font for specific buildings following site review.
Helvetica Bold - 53pt
Text must be engraved @14 high
Silver metallic rowmark (to fit 32 extrusion) on black engraving plastic, clear anodised ticket strip.
Removable room name
Permanently fixed door number flips to align with door handle.
Permanently fixed door number flips to align with door handle.
ID.1.1IDENTIFICATION (DOOR SLIDER)
Curtin University Internal Signage GuidelinesCurtin University is a trademark of Curtin University of Technology Issue: 08.05.2020 16
Installation Guide: Right Aligned Handle
Scale 1:20
Example: Solid door with latch
Installation Guide: Left Aligned Handle
Scale 1:20
Example: Solid door with latch
Align sign to same side as door latch
Align sign to same side as door latch
Align to top of door handle plate.
Photo ReferenceS
ID.1.1AIDENTIFICATION - TYPE 1A (SOLID DOOR WITH LATCH)
Curtin University Internal Signage GuidelinesCurtin University is a trademark of Curtin University of Technology Issue: 08.05.2020 17
Installation Guide: Right Aligned Handle
Scale 1:20
Example: Solid door with lock only
Installation Guide: Left Aligned Handle
Scale 1:20
Example: Solid door with lock only
Align sign to same side as keyhole
Align sign to same side as keyhole
Align to top of door handle plate.
Photo ReferenceS
ID.1.1BIDENTIFICATION - TYPE 1B (SOLID DOOR WITH LOCK)
Curtin University Internal Signage GuidelinesCurtin University is a trademark of Curtin University of Technology Issue: 08.05.2020 18
ID.1.1CIDENTIFICATION - TYPE 1C (GLAZED DOOR WITH MULLION)
Photo ReferenceS
Installation Guide: Right Aligned Handle
Scale 1:20
Example: Glazed door with mullion
Installation Guide: Left Aligned Handle
Scale 1:20
Example: Glazed door with mullion
Sign to line up with glass door width
Align to top of door handle plate.
Sign to line up with glass door width
Curtin University Internal Signage GuidelinesCurtin University is a trademark of Curtin University of Technology Issue: 08.05.2020 19
ID.1.2IDENTIFICATION - TYPE 2 (VINYL GRAPHICS)
Installation Guide
Scale 1:20
Vinyl graphic to line adjacent to door handle. Adjust alignment when handle is on right / left side.
NOTE: Text will be specific to room or building.
Minimum margin 50 from glazing edge (check for obscuring issues)
Front Elevation
Scale 1:2
Fabrication Specs
Graphics / text to be matt opaque white vinyl - 3M.
NOTE: if vinyl is applied to solid door adjust colour to ensure 30% contrast with background. Confirm with Client representative of any change.
Font
Univers Bold Condensed - 118pt
CHEMISTRY LABORATORY12530
30
15
Photo ReferenceS
Curtin University Internal Signage GuidelinesCurtin University is a trademark of Curtin University of Technology Issue: 08.05.2020 20
Fabrication Specs
3mm clear acrylic panel
Reverse cut black vinyl letters backed with yellow vinyl - Primrose Yellow (Arlon).
Double sided tape to rear. Soft edges.
Example only
300
150
RC.1ROOM CAPACITY
Photo ReferenceS
Installation Guide
Scale 1:20
Front Elevation - Layout A
Scale 1:2
centre
Font
Helvetica Bold 146pt
Capacity number to suit specific location. Confirm on site prior to production.
Font
Helvetica Bold 70pt
50
Curtin University Internal Signage GuidelinesCurtin University is a trademark of Curtin University of Technology Issue: 08.05.2020 21
SIGNAGE STANDARD - 2
2
Curtin University Internal Signage GuidelinesCurtin University is a trademark of Curtin University of Technology Issue: 08.05.2020 22
ceiling
1100
110 990
100 (to be confirmed for each level)
100
10075
12.5
12.5
5 (spacer)
TEXT HERE
TOILETS
Fabrication Specs
5 Aluminium panel (or equivalent), with fronts 2 pack painted to match Pantone Cool Grey 8.
Black and white vinyl lettering / arrow and icon details applied over sign panel.
Signage to be suspended from ceiling with 1.5 stainless cable, with suitable 5 spacer between panels.
Contractor required to provide shop drawings of fixing methods.
25
25
50 70
25
WS.2WAYFINDING - SUSPENDED
Front Elevation
Scale 1:5
Font
Sansa Soft Pro Normal 170pt. Kerning: -15
Curtin University Internal Signage GuidelinesCurtin University is a trademark of Curtin University of Technology Issue: 08.05.2020 23
TOILETS
TEXT HERE
TEXT HERE
TEXT HERE
TEXT HERE
TOILETS
ceiling
ceiling
ceiling
Single Panel Example
Double Panel Example
Triple Panel Example
Photo ReferenceS
Minimum 2400 to the underside
Check with client if this is not possible
Minimum 2400 to the underside
Check with client if this is not possible
Minimum 2400 to the underside
Check with client if this is not possible
WS.2WAYFINDING - SUSPENDED
Curtin University Internal Signage GuidelinesCurtin University is a trademark of Curtin University of Technology Issue: 08.05.2020 24
WW.2WAYFINDING - WALL MOUNTED
1100Front View
Back View
110
25
25
990
100
10075
12.5
12.5
5 (gap)
TEXT HERE
TOILETS
25
25
50 70
25
Side View
15 3
Elevations
Scale 1:5 Fabrication Specs
3 Aluminium panel (or equal equivalent), with all sides 2 pack painted to match Pantone Cool Grey 8.
Black vinyl to wrap top and bottom of sign for a neat finish. Satin Clear coat over.
3M matt cast white vinyl lettering / arrow and icon details applied over sign panel.
Signage to be wall mounted with 15 backing panel (inset 25 from all edges). Concealed fixings. Paint black.
5 gap between panels.
Contractor required to provide shop drawings of fixing methods.
Font
Sansa Soft Pro Normal 170pt. Kerning: -15
Curtin University Internal Signage GuidelinesCurtin University is a trademark of Curtin University of Technology Issue: 08.05.2020 25
F.I.L.M 202, 206
COLLABORATIVE POD 203, 205
TOILETS
F.I.L.M 211, 218
COLLABORATIVE POD 212 - 217
1500 AFL - Varies
250
2.40
Installation Guide
Scale 1:20
Photo ReferenceS
WW.2WAYFINDING - WALL MOUNTED
Curtin University Internal Signage GuidelinesCurtin University is a trademark of Curtin University of Technology Issue: 08.05.2020 26
ID.2.1IDENTIFICATION - TYPE 1
Installation Guide
Scale 1:X
Front Elevation: Layout B
Scale 1:4
Front Elevation: Layout A
Scale 1:4
If no room number is required, delete number, but black panel remains
210 STAFF ONLY
25
Font
Curtin Sansa Soft Pro Normal All caps, 86pt, Tracking -15
25
150 550
60
210STAFF ONLY
25 25
150550
60
Fabrication Specs
2 aluminium fabricated sign panel - cut to shape. Edges to be flush with no sharp edges. Corners rounded off.
2-pack paint background to match Pantone Cool Grey 8.
Blank band to be applied with black vinyl - wrap top and bottom of sign panel. Satin clear coat applied over to encapsulate black vinyl.
Graphics / text to be matt opaque white vinyl - 3M.
Curtin University Internal Signage GuidelinesCurtin University is a trademark of Curtin University of Technology Issue: 08.05.2020 27
Installation Guide: Right Aligned Handle
Scale 1:20
Example: Solid door with latch lock
Installation Guide: Left Aligned Handle
Scale 1:20
Example: Solid door with latch lock
Butt sign to same side as door latch
Butt sign to same side as door latch
410 STAIR ACCESS410AUTHORISED ACCESS ONLYAlign to top of door handle plate.
Photo ReferenceS
410OFFICE
OFFICE
Double Panel Example
If TWO door plates are required provide a 10 space. No room number required on lower panel.
ID.2.1AIDENTIFICATION - TYPE 1A (SOLID DOOR WITH LATCH)
Photo ReferenceS
Curtin University Internal Signage GuidelinesCurtin University is a trademark of Curtin University of Technology Issue: 08.05.2020 28
Photo ReferenceS
Application to Glazing
When applied to glazing an extra layer of black vinyl is required to conceal all glue fixings from inside the room. Apply black vinyl, cut to shape, to the front of glass, with sign panel placed over (double layer).
Coordination of installation may be required with graphic film (where applicable).
410 MEETING ROOM410 MEETING ROOM410OFFICE
Installation Guide: Right Aligned Handle
Scale 1:20
Example: Glazed door Layout B should be aligned to the same side as the
Installation Guide: Left Aligned Handle
Scale 1:20
Example: Glazed door Layout A should be aligned to the same
Butt sign to same side as door latch
Butt sign to same side as door latch
Align to top of door handle plate.
410
AUTHORISED ACCESS ONLY
glass
VinylSign panel
410OFFICE
OFFICE
Double Panel Example
If TWO door plates are required provide a 10 space. No room number required on lower panel.
ID.2.1BIDENTIFICATION - TYPE 1B (GLAZED DOOR)
Curtin University Internal Signage GuidelinesCurtin University is a trademark of Curtin University of Technology Issue: 08.05.2020 29
ID.2.2IDENTIFICATION - TYPE 2 (125 LETTERING)
Fabrication Specs
Room Number to be opaque matt white vinyl applied to outside of glazing - 3M.
Notes
Ensure correct text alignment when installing signage. Always refer to content schedule for notes, and locations plans for indicative placement. Confirm on site prior to install. 101125
Photo ReferenceS
Font
Curtin Sansa Soft Pro Normal - 470pt Tracking -15
Front Elevation
Scale 1:1
Curtin University Internal Signage GuidelinesCurtin University is a trademark of Curtin University of Technology Issue: 08.05.2020 30
Level 2 FFL0.000 m
Level 1 FFL-0.514 m
A7302
Mezzanine Level2.900 m
Level 2 FFL0.000 m
Level 1 FFL-0.514 m
A7301
Mezzanine Level2.900 m
Level 2 FFL0.000 m
Level 1 FFL-0.514 m
A7301
Mezzanine Level2.900 m
Level 2 FFL0.000 m
Level 1 FFL-0.514 m
A7302
Mezzanine Level2.900 m
Level 2 FFL0.000 m
Level 1 FFL-0.514 m
10987654321 11 12
A
B
C
D
E
F
G
H
SITE CHECK TO CONFIRM
ISSUESHEET NUMBERDWG No
SHEET SIZE
DWG STAUS
CURTIN PROJECT No
SCALE:UNIT:
DRN BY
DATE
DESIGNED
CHECKED
PROJ APP
CLIENT APP
mm
CHECK SITE DIMENSIONS AND VERFIY DRAWINGS PRIOR TO
CONSTRUCTION
-
A1
ABN 46 109 290 842
L5, 56 William Street, Perth WA 6000
Telephone 08 9322 5322
www.gresleyabas.com.au
Gresley Abas Pty Ltd
C1
22.11.17
22/11/2017 1:49:06 PM
As indicated
DAP Relife
01B203-A-EL0101
BENTLEY CAMPUS
BUILDING 203EXISTING ELEVATIONS
TC
JR
AA
JR
CONSTRUCTION
CONSTRUCTION
1724
A630
STAGE 1
1 : 100A130EXISTING EAST ELEVATION1
1 : 100A130EXISTING NORTH ELEVATION2
1 : 100A130EXISTING SOUTH ELEVATION3
1 : 100A130EXISTING WEST ELEVATION4
REV DATE REVISION BYC1 22.11.17 ISSUED FOR CONSTRUCTION JR
1 : 50A130EXISTING ELEVATION 101 ENTRY5
Level 2 FFL0.000 m
Level 1 FFL-0.514 m
A7302
Mezzanine Level2.900 m
Level 2 FFL0.000 m
Level 1 FFL-0.514 m
A7301
Mezzanine Level2.900 m
Level 2 FFL0.000 m
Level 1 FFL-0.514 m
A7301
Mezzanine Level2.900 m
Level 2 FFL0.000 m
Level 1 FFL-0.514 m
A7302
Mezzanine Level2.900 m
Level 2 FFL0.000 m
Level 1 FFL-0.514 m
10987654321 11 12
A
B
C
D
E
F
G
H
SITE CHECK TO CONFIRM
ISSUESHEET NUMBERDWG No
SHEET SIZE
DWG STAUS
CURTIN PROJECT No
SCALE:UNIT:
DRN BY
DATE
DESIGNED
CHECKED
PROJ APP
CLIENT APP
mm
CHECK SITE DIMENSIONS AND VERFIY DRAWINGS PRIOR TO
CONSTRUCTION
-
A1
ABN 46 109 290 842
L5, 56 William Street, Perth WA 6000
Telephone 08 9322 5322
www.gresleyabas.com.au
Gresley Abas Pty Ltd
C1
22.11.17
22/11/2017 1:49:06 PM
As indicated
DAP Relife
01B203-A-EL0101
BENTLEY CAMPUS
BUILDING 203EXISTING ELEVATIONS
TC
JR
AA
JR
CONSTRUCTION
CONSTRUCTION
1724
A630
STAGE 1
1 : 100A130EXISTING EAST ELEVATION1
1 : 100A130EXISTING NORTH ELEVATION2
1 : 100A130EXISTING SOUTH ELEVATION3
1 : 100A130EXISTING WEST ELEVATION4
REV DATE REVISION BYC1 22.11.17 ISSUED FOR CONSTRUCTION JR
1 : 50A130EXISTING ELEVATION 101 ENTRY5
Installation Guide: Door with mid-rail
Install signage flush with mid-rail as per example
Installation Guide: Full Glazed Door
Install signage 30 above decal as per example
75
125125 30
5050
101101
ID.2.2IDENTIFICATION - TYPE 2 (125 LETTERING)
Curtin University Internal Signage GuidelinesCurtin University is a trademark of Curtin University of Technology Issue: 08.05.2020 31
200
250
Radius 60Front Elevations
Scale 1:2
Top View
Side B
Icon is always right-reading
Side A
122 12269
Viewing distance = approx 41m
Fabrication Specs
10 acrylic fabricated sign panel. Edges to be mitred and flush with no sharp edges. Corners rounded off.
2-pack paint to match Pantone Cool Grey 8 and Pantone Process Black C (Dulux colour Black PG1A9) with pearl effect satin finish (to edge & bracket details - both sides).
Graphics / text to be matt opaque white vinyl - 3M
Accessible blue to match Pantone 2945 with white icon / text if required
Black “L shaped” aluminium bracket fixed to wall with concealed fixings. All screws to be countersunk and colour-matched. Additional black strip required to conceal fixings on Side B. Signage fabricator to confirm fixing method, and provide shop drawings for approval.
Height above floor level to align with top of door frames.
IDC.2IDENTIFICATION - CANTILEVERED ROOM NUMBER
Photo ReferenceS
20
Font
Sansa Soft Pro Normal 260pt. Kerning: -15
Curtin University Internal Signage GuidelinesCurtin University is a trademark of Curtin University of Technology Issue: 08.05.2020 32
Fabrication Specs
2 acrylic fabricated sign panel. Edges to be mitred and flush with no sharp edges. Corners rounded off.
Raised Braille tactile membrane applied with colours to match Pantone Cool Grey 8 and to match Pantone Process Black C (Dulux colour Black PG1A9) with pearl effect satin finish.
Accessible blue to match blue B21 ultramarine with white icon / text if required
Correct braille to be inserted in all instances.
Text to be upper and lower case and aligned left.
Colours to be prototyped and approved prior to construction. Colour to be tested under ambient light conditions on site.
Signage contractor to ensure fabrication method meets compliance with BCA and Australian Standards.
Font: Curtin Sansa Soft Pro Normal
75pt on 90pt leading, Tracking -15
Female Toilet
200
400 Layout B
Female Toilet
250
150
40
22.5
Radius 60
FW.2FACILITY - WALL MOUNTED
Photo ReferenceS
Front Elevation - Layout A
Scale 1:2
Curtin University Internal Signage GuidelinesCurtin University is a trademark of Curtin University of Technology Issue: 08.05.2020 33
Male Toilet
Male Ambulant
UnisexShower
Unisex Toilet LH & Shower
Unisex Toilet RH & Shower
Female Ambulant
All GenderToilet LH
All GenderToilet RH
Braille Translation - Female Toilet
Braille Translation - Unisex Shower
Braille Translation - All Gender and Accessible Toilet LH and Shower
Braille Translation - All Gender and Accessible Toilet RH and Shower
Braille Translation - Female Ambulant Toilet
Braille Translation - Male Braille Translation - Male Braille Translation - All Gender and Accessible Toilet LH
Braille Translation - All Gender and Accessible Toilet RH
Female Toilet
Female Toilet
.
Layout A Layout B
Parents Room
Braille Translation - Parents Room
Examples
Scale 1:10
NOTE: Correct braille to be inserted in all instances
FW.2FACILITY - WALL MOUNTED
Curtin University Internal Signage GuidelinesCurtin University is a trademark of Curtin University of Technology Issue: 08.05.2020 34
Installation Guide: Layout B
Scale 1:20
Installation Guide: Layout A
Scale 1:20
Installation Guide: Centre on Door
Scale 1:20
Yoka
Female Toilet
Yoka
Female Toilet
Yoka
Female Toilet
Preferred location: Position alongside door on wall next to door handle
Preferred location: Position alongside door on
wall next to door handle
Secondary location: centred on door if there is no available wall space - use Layout A
FW.2FACILITY - WALL MOUNTED
1200 AFL
50 50
Curtin University Internal Signage GuidelinesCurtin University is a trademark of Curtin University of Technology Issue: 08.05.2020 35
FC.2FACILITY - CANTILEVERED
Installation Guide
Scale 1:X
Examples
Side A Side BSide A Side B Side A Side B Side A Side B
200 20
250
Radius 60Front Elevations
Scale 1:2
Photo ReferenceS
Side B
Icon is always right-reading
Side A
Fabrication Specs
10 acrylic fabricated sign panel. Edges to be mitred and flush with no sharp edges. Corners rounded off.
2-pack paint to match Pantone Cool Grey 8 and Pantone Process Black C (Dulux colour Black PG1A9) with pearl effect satin finish (to edge & bracket details - both sides).
Graphics / text to be matt opaque white vinyl - 3M
Accessible blue to match Pantone 2945 with white icon / text if required
Black “L shaped” aluminium bracket fixed to wall with concealed fixings. All screws to be countersunk and colour-matched. Additional black strip required to conceal fixings on Side B. Signage fabricator to confirm fixing method, and provide shop drawings for approval.
Height above floor level to align with top of door frames.
Top View
Curtin University Internal Signage GuidelinesCurtin University is a trademark of Curtin University of Technology Issue: 08.05.2020 36
ST.2.1STATUTORY - TYPE 1 (23MM)
Fabrication Specs
White Self Adhesive Vinyl applied direct to door.
FIRE SAFETY DOOR DO NOT OBSTRUCT
FIRE SAFETY DOOR DO NOT OBSTRUCT
Layout A - left aligned
Layout B - right aligned
23
14
23
14
Front Elevation
Scale 1:2
Font: Curtin Sansa Soft Pro Normal
All caps, 86pt on 106pt leading, Tracking -15
Curtin University Internal Signage GuidelinesCurtin University is a trademark of Curtin University of Technology Issue: 08.05.2020 37
Photo ReferenceS
Photo ReferenceSAlign Left Align Right
Installation Guide: Layout B - Right aligned text
Scale 1:20
Position on both sides of a double door
Installation Guide: Layout A - Left aligned text
Scale 1:20
Position on both sides of a double door
410 STAIR ACCESS410AUTHORISED ACCESS ONLY
FIRE SAFETY DOOR DO NOT OBSTRUCT
FIRE SAFETY DOOR DO NOT OBSTRUCT
60
ST.2.1STATUTORY - TYPE 1 (23MM)
1200 AFL
Curtin University Internal Signage GuidelinesCurtin University is a trademark of Curtin University of Technology Issue: 08.05.2020 38
Installation Guide
Scale 1:X
FIRE HOSE REELFIRE EXTINGUISHER
FIRE INDICATOR PANEL
50
28
32
50
Front Elevation
Scale 1:2 Fabrication Specs
White Vinyl applied directly to door.
Font
FIRE HOSE REEL (50 text)
Font: Curtin Sansa Soft Pro Normal
All caps, 190pt on 190pt leading, Tracking -15
Font
FIRE EXTINGUISHER (32 text)
Font: Curtin Sansa Soft Pro Normal
All caps, 120pt on 166pt leading, Tracking -15
ST.2.2STATUTORY - TYPE 2 (50MM)
Curtin University Internal Signage GuidelinesCurtin University is a trademark of Curtin University of Technology Issue: 08.05.2020 39
centrecentre
1500 AFL
50
1500 AFL
50 32
Installation Guide: Application to door
Scale 1:20
Photo ReferenceS
ST.2.2STATUTORY - TYPE 2 (50MM)
Curtin University Internal Signage GuidelinesCurtin University is a trademark of Curtin University of Technology Issue: 08.05.2020 40
FEC.2FIRE EXTINGUISHER - CANTILEVERED
200
250
Side B
Icon is always right-reading
Side A
FIREEXTINGUISHER
FIREEXTINGUISHER
140
17
17
9
Radius 60
Elevations
Scale 1:2
Photo ReferenceS
Fabrication Specs
10 acrylic fabricated sign panel. Edges to be mitred and flush with no sharp edges. Corners rounded off.
2-pack paint to match Pantone 485 Red / ensure meets BCA requirements and Pantone Process Black C ((Dulux colour Black PG1A9) with pearl effect satin finish (to edge & bracket details - both sides).
Graphics / text to be gloss opaque white vinyl.
Black “L shaped” aluminium bracket fixed to wall with concealed fixings. All screws to be countersunk and colour-matched. Additional black strip required to conceal fixings on Side B. Signage fabricator to confirm fixing method, and provide shop drawings for approval.
Above floor level height to be consistent with INT2.2 Facility Cantilevered Signs, while meeting BCA requirements.
Height above floor level to align with top of door frames.
Top View
20
Curtin University Internal Signage GuidelinesCurtin University is a trademark of Curtin University of Technology Issue: 08.05.2020 41
FEW.2FIRE EXTINGUISHER - WALL-MOUNTED
Fabrication Specs
3 acrylic fabricated sign panel. Edges to be mitred and flush with no sharp edges. Corners rounded off.
2-pack paint to match Pantone 485 Red / ensure meets BCA requirements and Pantone Process Black C (Dulux colour Black PG1A9) with pearl effect satin finish.
Graphics / text to be gloss opaque white vinyl.
Concealed fixings to wall.
Above floor level height to be confirmed on site - ensure compliance with BCA requirements.
Photo ReferenceS
200
250
FIREEXTINGUISHER
140
17
17
9
Radius 60
Elevation
Scale 1:2
Curtin University Internal Signage GuidelinesCurtin University is a trademark of Curtin University of Technology Issue: 08.05.2020 42
NOTE: Position of the curve is required to be coordinated on site as per below.
centre
Installation Guide: A - Left of door
Scale 1:20
Installation Guide: B - Right of door
Scale 1:20
Installation Guide: C - Flat on wall
Scale 1:20
FIREEXTINGUISHER
FIREEXTINGUISHER
FIREEXTINGUISHER
min 2000 above AFL to underside as per AS2444
FEW.2FIRE EXTINGUISHER - WALL-MOUNTED