DRUM HANDLING EQUIPMENT
54SPECIALS CAN BE MADE TO SUIT CUSTOMERS’ UNIQUE REQUIREMENTS
MODEL SUITABLE FOR WHEELS CAPACITY
DTZ80 Rough Terrain Steel-centred 426mm pneumatic 350kg
DTFBSR Industrial Steel-centred 250mm pneumatic 350kg
DTWHBB Industrial & Yard Steel-centred 250mm solid rubber 350kg
DTBWBB Drum Cradle 400mm plastic-centred pneumatic 350kg
Strong steel construction, Zinc Plated protection. Heavy sliding catch engages over drum lip. Wheel choices (as pictured). 100mm nylon jockey wheels allow maximum stability when drums are loaded or unloaded.
DR64 TRIANGULAR
CASTORS: 75mm nyl. swivel
CAPACITY: 300kg
SIZE: 500m
DDSQ SQUARE
CASTORS: 75mm nyl. swivel
CAPACITY: 400kg
SIZE: 600mm x 600mm
DR66 SQUARE
CASTORS: 75mm nyl. swivel
CAPACITY: 400kg
SIZE 600mm x 600mm
HEIGHT: 125mm
DDSQ
SquareProvides full mobility of drums throughout the factory.
Heavy steel angle construction.
For 200L steel drums.
DR64 – TriangularHeavy steel flat bar construction.
For 200L steel drums.
Castors: 75mm nylon swivel.
Capacity: 300kg
Designed for handling low weight or low volume 60 or 200L steel drums. Strong steel construction with a zinc-plated finish for full protection. Sliding catch secures drum.
Can also be used as a General Purpose Hand Truck.
Wheel options:300 x 4 pneumatic or250mm solid rubber.
DTC/TPlastic Drum Tie-downA strong webbing and ratchet tie-down is available as an optional extra for securing plastic drums to the Drum-truck.
DTC DRUM TRUCK
HEIGHT: 1200mm
CAPACITY: 250kg
LIP SIZE: 250mm x 360mm
DR66 SquareGeneral purpose. Welded angle steel with 18mm customwood deck.
Heavy-duty Drum Trucks for 200/220L Drums• Welded steel construction with zinc-plated
finish for maximum corrosion resistance
• A range of wheel options – pneumatic or solid rubber
• Attachment for plastic drums an optional extra for each model
Up to 350kg capacity
DTZ80 Rough TerrainNegotiate gravel surfaces, floor grates etc.Wheels: 426mm pneumatic. 100mm nylon jockey.
DTFBSR IndustrialUse on multi surfaces.Wheels: 250mm pneumatic. 100mm nylon jockey.
DTWHBBIndustrial & YardFor smooth surfaces.Wheels: 250mm Solid Rubber-tyred
DTBWBB Drum CradleChain secures the drum.
Fixed stand to lay horizontally. Wheels:400mm pneumatic.
DTC
SPECIALPURPOSEHAND-
TRUCKSPg 51–53
Combination Drum Truck Drum Dollies
55
DRUM HANDLING EQUIPMENT
DC1 Drum CradleIdeal for 200L steel drums. Telescopic
handles with sliding catches which engage the drum lip. Rock back onto wheels to tilt drum horizontially to transport or decant.
DC1 DRUM CRADLE
SIZE: 930mm Long (handles in) Add 560mm with handles out 500mmW x 510mmH
WHEELS: 100mm black polypropylene
FOR DRUM PUMPS & TAPS SEE PAGE 58 – 59
Drum Tipping Cradles
DC4 Drum CradleFor 200L steel drums or 220L plastic drums. Position flat-bar lip under lower lip of drum and pull back to tilt horizontally to transport or decant.
Fit attachment DC4R (right) to freely rotate (steel) drums when resting horizontially.
DC4RDrum Revolving
Attachment
DC4 DRUM CRADLE
SIZE: 900mmL (including lip) 550mmW x 480mmH
WHEELS: 100mm black polypropylene
DC4R DRUM REVOLVING ATTACHMENT
SIZE: 590mmL x 480mmW
WHEELS: 75mm black nylon
Zinc-plated protection
Capacity: 250kgLength: 1120mm
DU Drum Upender
DLS Drum Lifting Sling DLCDrum Lifting
Clamp – Elephant
Lift drums vertically, horizontally or invert and
dump contents. Self locking jaws. Use with overhead hoist.
Capacity: 1000kg
DT Drum TongsLift drums horizontally using overhead hoist. Semi-automatic. Use with a forklift truck or overhead hoist.
DL70Drum Lifter (right)
Attach to 200 litre drums and use lifting hook/overhead hoist.
DTUDrum Tilting Unit (far left)
Two models – standard DTU for use with an overhead hoist, and a model with forklift pockets.
Drums rotate freely on axis.Optional locking device available.Ratchet secures drum.
DWSDrum Webbing Sling (left)
For 60L & 200L steel drums and a number of plastic drums.Ratchet secures drum.
• Welded steel construction with zinc-plated finish for maximum corrosion resistance
• Designed for 200L steel drums with plastic drum options.
Up to 250kg capacity
Drum Tipping Cradles
Our specialised Drum Handling Equipment is designed and built to provide
safe and efficient handling of heavy and awkward drums of all types. They’re
constructed from high quality steel and are very strong and robust.
General Drum Handling
Lift drums vertically, horizontally, or angled to discharge contents. Use with a forklift truck or overhead hoist.
DTU DWS
DL70
Drum Cradles
DRUM HANDLING EQUIPMENT
56
FDTU Forklift Drum Tilter
Easily slide on to forks. Drums rotate freely on axis with optional locking device available. Ratchet and chain secures drum.
Capacity: 360kg
Maximum fork section: 135 x 50mm
ADC1 Auto Drum Clamp
Easily slide on to forks.Suitable for standard steel 200L drums.
Also available:
ADC2 Double Drum
Capacity: 360kg
Maximum fork section: 180 x 50mm
Forklift Attachments – Drum Grips & Clamps • Heavy, welded steel construction
• Designed to handle 200L steel drums
Up to 680kg capacity
DG360A Single
DG360B Double
AUTO PARROT BEAK GRIP
Suitable for standard steel 200L and 60L drums – also Mauser L-ring drums, CHH plastic drums and Fibreboard drums.
Capacity: 360kg
Max. fork section: 135 x 50mm
HDT25B Hydraulic Drum Truck
STRADDLE LEG
The claw grabs the drum lip – hydraulic pump raises drum to desired height. Move easily on large roller wheels and easy steering rear braked castor.
Capacity: 250kg. Lifting height: 345mm
FLB150 Forklift Drum Carrier
Manipulate Drum from the Forklift. Suitable for standard steel 200L drums, also Mauser L ring, and some plastic drums. Ratchet and chain secures drum.
Capacity: 680kg
Maximum fork section: 170 x 50mm
EASYSLIP-ON
TYPE
ASK US ABOUTOTHER MODELS
OF FORKLIFT ATTACHMENTS
MK80 Mobile Drum Carrier
Tighten the chain lever to secure drum to the collar. Lift and tilt to decant a full drum. 2 large roller wheels with easy steering rear castor
Capacity: 360kg
Drum Lifting Trucks
57
DRUM HANDLING EQUIPMENT
• Maximum capacity 2500kg at extension position 1.
• Welded steel construction, fully zinc-plated for maximum corrosion resistance
Up to 2500kg capacity
Forklift Attachments – Fixed Jib and Bin Tipper
M16Coupler S/S
Drum Mixing EquipmentMixing blades are specially designed for bung-hole entry mixing in 60 & 200L drums. The stainless steel blades are lightweight and portable for speed and efficiency and set-up is simple. The mixers can be driven with a 1/2” electric drill or explosion-proof air drive motor (as pictured). Thick or cold fluids can be thinned by heating (see Drum Heater) for quicker mixing and dispensing.
The Fixed Jib provides an additional lifting height with the extension beam being raised above the fork pockets. Secured to the forklift by safety chains, the overall length when retracted is 1.3m, and when extended is 2m.
Fixed Jib Attachment – Short. 2.5 tonne
FJCS25 FIXED JIB ATTACHMENT
CAPACITY: 2500kg Maximum
FORK POCKETS: 185mm x 65mm
UNIT WEIGHT: 100kg
With two models available, one
for 240L and another for 660L
wheelie bins, the WB style tipper
is operated from the forklift
drivers seat by a pull-cord. The bin
is secured in the bin cradle with
safety chains.
• Enamel paint finish
• 500kg capacity
SAFE WORKING LOAD (SWL) PER POSITION:
POSITON: 1 2 3 4
EXTENSION: 790 1200 1580 1960
SWL: 2500kg 1200kg 900kg 750kg
FORK LOAD UNITMODEL CAPACITY POCKETS CENTRES WEIGHT
WB-240 500kg 165 x 65mm 1000mm 100kg
WB-660 500kg 165 x 65mm 1700kg 140kgWB-660
FJCS25
Wheelie Bin Tipper
WB-240
240L & 660LMODELS
Drum Heating Collar
DHB/T Drum Heater
(200/220L steel drums only)
For heating, melting and thawing non-volatile liquids, solids and viscous materials such as greases, fats, gelatine, tar and heavy oil.
Heater is non-flameproof for operation on 230 volt AC mains. Maximum 2000W with thermostat control (supplied without input lead). Standard temperature range 30º–110º, special 0º–40º.
200L DRUM:
M02 Mixer
M16 Coupler
M07 Motor Stand
M14 Air Drive Motor (300 - 3000rpm)
60L DRUM :
M19 Mixer
M24 Coupler
M07 Motor Stand
M14 Air Drive Motor (300 - 3000rpm)
USUAL REQUIREMENTS
BUNG ENTRY (2”BSP)
ELECTRIC DRILL OPERATION
Variable speed drill – 1/2” chuck or larger.
200L DRUM: M02 Mixer
60L DRUM: M19 Mixer
M07Motor StandGalvanised
M02 Mixing Blade 5-blade, Stainless Steel
M14Air Drive Motor
DRUM HANDLING EQUIPMENT
58
Drum Pumps
Rocker Galley Pump
• Fresh or salt water
• 13 strokes per litre
Ultra Pantry Pump• Quality plastic
pump
• Vertical plunger action
Bung SpannerDBS3 430mm
For removing bungs from steel or plastic
drums. Fits most types of drum closure.
Diaphragm Hand Pump
• Self-priming
IMPORTANT: Advise specific chemical applications to ensure correct usage. Always wear protective clothing and eye protection when dispensing chemicals. Don’t mix applications; ie. one pump per fluid type.
Rotary PumpTQ14
Cast alloy body with steel inlet/outlet tubing and heavy-duty
handle. Delivers up to18 litres per minute. Transfer fluids
in both directions. Ideal for transferring petrol, diesel fuels,
heavy oil, machine oil, low viscosity oils and non-corrosive
liquids. Includes 2.2m farm tank grade anti-static hose.
Lever PumpTQ01General purpose, steel construction with three alternative
‘O’ rings and chemical compatibility chart. Telescopic suction
tube. Comes with 1.8m outlet hose (petrol resistant). Suitable
for a wide variety of chemicals and solvents. Convenient bung
opener cast on pump head. Pumps approx. 250ml per stroke,
and handles liquids to SAE90.
SigmaDouble-action Pump
• Cast-iron K model
• Suitable for clear and light fluids – water, petrol, diesel.
Drum Pump options designed for use with
two inch outlets on 200L and 60L standard
steel drums.
Suitable for 2” outlets
Hand Pumps – SUITABLE FOR BOATS, CARAVANS, MOTOR HOMES ETC.
Siphon PumpTQ05
Polyethylene construction.
Siphons liquids from higher
to lower levels. Pumping
the bellows primes the
pump and begins siphon
action. Simply loosen vent
cap to stop the siphon flow.
Pump bellows to dispense
fluids to a higher level.
Siphons up to 20 litres per
minute, handles light oils,
kerosene and various types
of light solvents.
ClassicBrass Pump
• 10 strokes per litre
59
DRUM HANDLING EQUIPMENT
• Polyethylene, Polypropylene, Brass and Stainless Steel
• Lever and screw-action models
2” and 3/4”Drum Taps
TP01 Polyethylene
Flo-king. lever action 2” NPS
TP08 Polyethylene LLDPE Lever action. 3/4” BSP
TP14 Polyethylene HDPE Front lever action. 3/4” BSP
TP09 Polyethylene HDPE Screw action. 3/4” BSP
TP04 Ball valveNickel plated, brass body, chrome plated ball, Teflon seals. Male/Female, 3/4” BSP
TP18 Brass SPRING LOADED.Self-closing, Teflon seal.Fire baffle 3/4” BSP
Special Purpose Taps
TP15/58 PolyethyleneLLDPE. Aeroflow with 58mm cap for Plastic Industry and Rheem containers.
TP15/70LLDPE. Aeroflow with 70mm cap for Carter Holt Harvey containers.
TP22 StainlessBall Valve (316)3 Piece. Teflon seal F-F 2” BSP. Serviceable in-situ
TP21 – 2 Piece. Teflon seal
F-F 2” BSP. Seal serviceable
TP20 – 1 Piece. Teflon seal F-F 2” BSP. (1” through body). Non-serviceable
TP22 with optional nipple and elbow
2” Drum Taps
TPB01 2” BSP external / 3/4” BSP internal
TPB02 2” Mauser external / 3/4” BSP internal
TPB03 2” Van Leer external / 3/4” BSP internal
TPB04 2” Rieke external / 3/4” BSP internal
TPB01 TPB02 TPB03 TPB04
TP02 Treacle Tap
Molasses Gate. Gunmetal, 2” BSP
TP02S Treacle Tap
Molasses Gate
Brass, spring loaded, Teflon seal, 2” BSP
KEY: BSP – British Standard Pipe Thread NPS – US National Pipe (straight) Thread HDPE – High Density Polyethylene LLDPE – Linear Low Density Polyethylene
TPA03 TPA01TPA06 TPA02
TPA01 2” Mauser external / 2” BSP internal short
TPA02 2” Rieke external / 2” BSP internal
TPA03 2” Van Leer external / 2” BSP internal
TPA06 IBC Shultz 60mm NW50 Butt Fem - 2” BSP
TP07 Polypylene HDPESPRING LOADED. Lever action. 3/4” BSP
3/4” Drum Taps
Bung Reducers – (HDPE)Drum Adaptors – Polyethylene (HDPE)
DRUM HANDLING EQUIPMENT
60
SL 1
Offering complete protection against damaging and costly chemical spills,
Spill Containment Bins are available for one, two and four 200 litre drums.
Close spacing support bars allow for large or small drums up to 2000kg to
be placed on the spill bin. All models have a spill capacity of at least 110%
containment of the largtest drum in accordance with Australian Standards,
being classified as ‘portable’ units, and have zinc-plated finish.
These drum racking options provide a cleaner
environment and a safer working area by
protecting against costly and dangerous spills.
The racking system consists of the bolt together
drum rack, and the spill containment tray which it
stands over. In the event of a spill, the tray can be
easily removed without disturbing the drum rack.
Each spill tray is fitted with a removable plug for
emptying.
Drum racking systems are fully zinc-plated
No. OF DIMENSIONS SPILL UNITMODEL DRUMS W x D x H CAPACITY WEIGHT
SL 1 1 810 x 760 x 490mm 240 litres 55kg
SL 2 2 1210 x 610 x 440mm 250 litres 60kg
SL 4 4 1210 x 1210 x 265mm 245 litres 70kg
SBP 4 4 1400 x 1400 x 270mm 245 litres 40kg
SL 4
SL 2
Drum Racking System
A NUMBER OF DRUM RACKING OPTIONS ARE AVAILABLE
RS2-2L
RS3-3LRS3L
RS2L
RS2L DRUM RACKING SYSTEM
WIDTH DEPTH HEIGHT
RACK: 1330mm 600mm 831mm
TRAY: 1210mm 1210mm 265mm
Stand alone Drum Rack bolts together. Tray sits below and is forkliftable without disturbing the rack.
FOR DRUM TAPS SEE PAGE 58 – 59
Drum Spill Containment Bins • One, two and four drum units available
• Spillage capacity is 110% containment
For 200L drums
SBP 4Plastic Spill PalletHolds up to four 200L drums. Drip and spill containment unit integrated with IBC bund. Worksafe compliant.