Download - EC744 Wireless Communications Spring 2007
![Page 1: EC744 Wireless Communications Spring 2007](https://reader031.vdocument.in/reader031/viewer/2022021207/620627dc8c2f7b173004f329/html5/thumbnails/1.jpg)
EC744 Wireless CommunicationsSpring 2007
Mohamed Essam KhedrDepartment of Electronics and Communications
OFDMwww.aast.edu/~khedr
![Page 2: EC744 Wireless Communications Spring 2007](https://reader031.vdocument.in/reader031/viewer/2022021207/620627dc8c2f7b173004f329/html5/thumbnails/2.jpg)
Motivation
• High bit-rate wireless applications in a multipath radio environment.
• OFDM can enable such applications without a high complexity receiver.
• OFDM is part of WLAN, DVB, and BWA standardsand is a strong candidate for some of the 4G wireless technologies.
![Page 3: EC744 Wireless Communications Spring 2007](https://reader031.vdocument.in/reader031/viewer/2022021207/620627dc8c2f7b173004f329/html5/thumbnails/3.jpg)
What is OFDM?• Modulation technique
– Requires channel coding– Solves multipath problems
OFDM modulation
Source coding
I/Q-mod., up-
converter
I/Q RFChannel coding /
interleaving
Transmitter:
InfoSource
OFDM de-modulation
Source decoding
Down-converter,
I/Q-demod.I/Q RF
Decoding / deinter-leaving
Receiver:Radio-channel
InfoSink
e.g. Audio 0110 01101101
fPSD
* fPSD
fc-fc
![Page 4: EC744 Wireless Communications Spring 2007](https://reader031.vdocument.in/reader031/viewer/2022021207/620627dc8c2f7b173004f329/html5/thumbnails/4.jpg)
Multipath Transmission
• Fading due to constructive and destructive addition of multipath signals.
• Channel delay spread can cause ISI.
• Flat fading occurs when the symbol period is large comparedto the delay spread.
• Frequency selective fading and ISI go together.
![Page 5: EC744 Wireless Communications Spring 2007](https://reader031.vdocument.in/reader031/viewer/2022021207/620627dc8c2f7b173004f329/html5/thumbnails/5.jpg)
Multipath Radio Channel
Multipath Propagation
• Reflections from walls, etc.
• Time dispersive channel– Impulse response:
• Problem with high rate data transmission:– inter-symbol-interference
τ [ns]
p (τ) (PDP)
![Page 6: EC744 Wireless Communications Spring 2007](https://reader031.vdocument.in/reader031/viewer/2022021207/620627dc8c2f7b173004f329/html5/thumbnails/6.jpg)
Delay Spread
• Power delay profile conveys the multipath delay spread effects of the channel.
• RMS delay spread quantifies the severity of the ISIphenomenon.
• The ratio of RMS delay spread to the data symbol period determines the severity of the ISI.
![Page 7: EC744 Wireless Communications Spring 2007](https://reader031.vdocument.in/reader031/viewer/2022021207/620627dc8c2f7b173004f329/html5/thumbnails/7.jpg)
Multipath Radio Channel
� �����������
Inter-Symbol-Interference
Transmitted signal:Received Signals:
Line-of-sight:
Reflected:
The symbols add up on the
channel Delays
![Page 8: EC744 Wireless Communications Spring 2007](https://reader031.vdocument.in/reader031/viewer/2022021207/620627dc8c2f7b173004f329/html5/thumbnails/8.jpg)
OFDM Technology
Concept of parallel transmission (1)Channel impulse response
1 Channel (serial)
2 Channels
8 Channels
Time
In practice: 50 … 8000Channels (sub-carriers)
Channels are transmitted at different frequencies (sub-carriers)
![Page 9: EC744 Wireless Communications Spring 2007](https://reader031.vdocument.in/reader031/viewer/2022021207/620627dc8c2f7b173004f329/html5/thumbnails/9.jpg)
Multipath Radio Channel
The Frequency-Selective Radio Channel
• Interference of reflected (and LOS) radio waves– Frequency-dependent fading
-10
-5
0
5
10
15
20
Frequency
Power response [dB]
![Page 10: EC744 Wireless Communications Spring 2007](https://reader031.vdocument.in/reader031/viewer/2022021207/620627dc8c2f7b173004f329/html5/thumbnails/10.jpg)
OFDM Technology
Concept of parallel transmission (2)
Channel impulse response
1 Channel (serial)
Channeltransfer function
Channels are “narrowband”
2 ChannelsFrequency
Frequency
8 ChannelsFrequency
FrequencyTime
Signal is “broadband”
![Page 11: EC744 Wireless Communications Spring 2007](https://reader031.vdocument.in/reader031/viewer/2022021207/620627dc8c2f7b173004f329/html5/thumbnails/11.jpg)
Implementation and System Model
Concept of an OFDM signal
Ch.1
Ch.2 Ch.3 Ch.4 Ch.5 Ch.6 Ch.7 Ch.8 Ch.9 Ch.10
Saving of bandwidth
Ch.3 Ch.5 Ch.7 Ch.9Ch.2 Ch.4 Ch.6 Ch.8 Ch.10
Ch.1
Conventional multicarrier techniques
Orthogonal multicarrier techniques
50% bandwidth saving
frequency
frequency
![Page 12: EC744 Wireless Communications Spring 2007](https://reader031.vdocument.in/reader031/viewer/2022021207/620627dc8c2f7b173004f329/html5/thumbnails/12.jpg)
A Solution for ISI channels
• Conversion of a high-data rate stream into several low-ratestreams.
• Parallel streams are modulated onto orthogonal carriers.
• Data symbols modulated on these carriers can be recoveredwithout mutual interference.
• Overlap of the modulated carriers in the frequency domain -different from FDM.
![Page 13: EC744 Wireless Communications Spring 2007](https://reader031.vdocument.in/reader031/viewer/2022021207/620627dc8c2f7b173004f329/html5/thumbnails/13.jpg)
OFDM
• OFDM is a multicarrier block transmission system.
• Block of ‘N’ symbols are grouped and sent parallely.
• No interference among the data symbolssent in a block.
![Page 14: EC744 Wireless Communications Spring 2007](https://reader031.vdocument.in/reader031/viewer/2022021207/620627dc8c2f7b173004f329/html5/thumbnails/14.jpg)
OFDM Mathematics1
2
0
( ) k
Nj f t
kk
s t X e π−
=
= � t ≡ [ 0,Τos]
Orthogonality Condition
*1 2
0
( ). ( ) 0T
g t g t dt =�In our case
2 2
0
. 0p q
Tj f t j f te e dtπ π− =�
For p ≠ q Where fk=k/T
![Page 15: EC744 Wireless Communications Spring 2007](https://reader031.vdocument.in/reader031/viewer/2022021207/620627dc8c2f7b173004f329/html5/thumbnails/15.jpg)
Transmitted Spectrum
![Page 16: EC744 Wireless Communications Spring 2007](https://reader031.vdocument.in/reader031/viewer/2022021207/620627dc8c2f7b173004f329/html5/thumbnails/16.jpg)
resemblesIDFT!
Spectrum of the modulated data symbols
• Rectangular Window of duration T0
• Has a sinc-spectrum with zeros at 1/ T0
• Other carriers are put in these zeros
• � sub-carriers are orthogonal
Frequency
Magnitude
�−
=
−∆−=1
0
)(2,, )()(
N
i
kTtfijkikBB exkTtwts π
N sub-carriers:
T0
![Page 17: EC744 Wireless Communications Spring 2007](https://reader031.vdocument.in/reader031/viewer/2022021207/620627dc8c2f7b173004f329/html5/thumbnails/17.jpg)
OFDM terminology
• Orthogonal carriers referred to as subcarriers {fi,i=0,....N-1}.
• OFDM symbol period {Tos=N x Ts}.
• Subcarrier spacing ∆f = 1/Tos.
![Page 18: EC744 Wireless Communications Spring 2007](https://reader031.vdocument.in/reader031/viewer/2022021207/620627dc8c2f7b173004f329/html5/thumbnails/18.jpg)
OFDM and FFT
• Samples of the multicarrier signal can be obtained using the IFFT of the data symbols - a key issue.
• FFT can be used at the receiver to obtain the data symbols.
• No need for ‘N’ oscillators,filters etc.
• Popularity of OFDM is due to the use of IFFT/FFT which have efficient implementations.
![Page 19: EC744 Wireless Communications Spring 2007](https://reader031.vdocument.in/reader031/viewer/2022021207/620627dc8c2f7b173004f329/html5/thumbnails/19.jpg)
OFDM Signal1
,0
( ) ( ( ))N
n k k osn k
s t X g t nT∞ −
=−∞ =
= −� �2
( )0
kj f t
k
eg t
π�= �
�
t ≡ [ 0,Τos]
Otherwise
ko s
kf
T= K=0,..........N-1
![Page 20: EC744 Wireless Communications Spring 2007](https://reader031.vdocument.in/reader031/viewer/2022021207/620627dc8c2f7b173004f329/html5/thumbnails/20.jpg)
By sampling the low pass equivalent signal at a rate N times
higher than the OFDM symbol rate 1/Tos, OFDM frame
can be expressed as:
1
,0
( ) ( ) ( )N
n n k k os osk
mF m X g t nT t n T
N
−
=
= − = +�
{ }1 2
, ,0
( ) .mN j kN
n n k n kk
F m X e N IDFT Xπ−
=
��= =� ��
m = 0....N-1
![Page 21: EC744 Wireless Communications Spring 2007](https://reader031.vdocument.in/reader031/viewer/2022021207/620627dc8c2f7b173004f329/html5/thumbnails/21.jpg)
Interpretation of IFFT&FFT
• IFFT at the transmitter & FFT at the receiver
• Data symbols modulate the spectrum and the time domain symbols are obtained using the IFFT.
• Time domain symbols are then sent on the channel.
• FFT at the receiver to obtain the data.
![Page 22: EC744 Wireless Communications Spring 2007](https://reader031.vdocument.in/reader031/viewer/2022021207/620627dc8c2f7b173004f329/html5/thumbnails/22.jpg)
Interference between OFDM Symbols
• Transmitted Signal
• Due to delay spread ISI occurs
Delay Spread
IOSI
OS1 OS2 OS3
• Solution could be guard interval between OFDM symbols
![Page 23: EC744 Wireless Communications Spring 2007](https://reader031.vdocument.in/reader031/viewer/2022021207/620627dc8c2f7b173004f329/html5/thumbnails/23.jpg)
Cyclic Prefix
• Zeros used in the guard time can alleviate interference between OFDM symbols (IOSI problem).
• Orthogonality of carriers is lost when multipath channels are involved.
• Cyclic prefix can restore the orthogonality.
![Page 24: EC744 Wireless Communications Spring 2007](https://reader031.vdocument.in/reader031/viewer/2022021207/620627dc8c2f7b173004f329/html5/thumbnails/24.jpg)
Cyclic Prefix
• Convert a linear convolution channel into a circular convolution channel.
• This restores the orthogonality at the receiver.
• Energy is wasted in the cyclic prefix samples.
![Page 25: EC744 Wireless Communications Spring 2007](https://reader031.vdocument.in/reader031/viewer/2022021207/620627dc8c2f7b173004f329/html5/thumbnails/25.jpg)
Cyclic Prefix Illustration
TosTg
Cyclic Prefix
OS 1 OS 2
OS1,OS2 - OFDM Symbols
Tg - Guard Time Interval
Ts - Data Symbol Period
Tos - OFDM Symbol Period - N * Ts
![Page 26: EC744 Wireless Communications Spring 2007](https://reader031.vdocument.in/reader031/viewer/2022021207/620627dc8c2f7b173004f329/html5/thumbnails/26.jpg)
������������� ���� �������������
![Page 27: EC744 Wireless Communications Spring 2007](https://reader031.vdocument.in/reader031/viewer/2022021207/620627dc8c2f7b173004f329/html5/thumbnails/27.jpg)
Introduction
Design of an OFDM System
Channel impulse
response
Guard intervallength
Channel Parametersare needed
x(4 … 10) FFTsymbollength
Nr. ofcarriers
Data rate;modulation
order
Other constraints:•Nr. of carriers should match FFT size
and data packet length•considering coding and modulation schemes
![Page 28: EC744 Wireless Communications Spring 2007](https://reader031.vdocument.in/reader031/viewer/2022021207/620627dc8c2f7b173004f329/html5/thumbnails/28.jpg)
OFDM System Design
Spectral Shaping by Windowing
−60 −40 −20 0 20 40 60−90
−80
−70
−60
−50
−40
−30
−20
−10
0
10
OFDM spectrum for NFFT
= 64, Nguard
= 16, oversampling = 2
frequency in sub−carriers
pow
er s
pect
rum
mag
nitu
de [d
B]
Nwin
= 2 N
win = 0
Nwin
= 16
![Page 29: EC744 Wireless Communications Spring 2007](https://reader031.vdocument.in/reader031/viewer/2022021207/620627dc8c2f7b173004f329/html5/thumbnails/29.jpg)
Design of an OFDM System
OFDM Symbol Configuration (2)• Not all FFT-points can be used for data carriers
– Lowpass filters for AD- and DA-conversion • oversampling required
– DC offsets; carrier feedtrough; etc.
DC–fs/2 fs/2
Transfer function oftransmitter/receiver
useable sub-carriers useable sub-carriers…, –1, 0, 1, … –N/2, … …, N/2–1
frequency
sub-carrierindex i
![Page 30: EC744 Wireless Communications Spring 2007](https://reader031.vdocument.in/reader031/viewer/2022021207/620627dc8c2f7b173004f329/html5/thumbnails/30.jpg)
Advantages of OFDM
• Solves the multipath-propagation problem
– Simple equalization at receiver
• Computationally efficient
– For broadband systems more efficient than SC
• Supports several multiple access schemes
– TDMA, FDMA, MC-CDMA, etc.
• Supports various modulation schemes
– Adaptability to SNR of sub-carriers is possible
• Elegant framework for MIMO-systems
– All interference among symbols is removed
![Page 31: EC744 Wireless Communications Spring 2007](https://reader031.vdocument.in/reader031/viewer/2022021207/620627dc8c2f7b173004f329/html5/thumbnails/31.jpg)
OFDM Technology
Problems of OFDM (Research Topics)
• Synchronization issues:– Time synchronization
• Find start of symbols– Frequency synchr.
• Find sub-carrier positions• Non-constant power envelope
– Linear amplifiers needed
• Channel estimation:
– To retrieve data
– Channel is time-variant
0 20 40 60 80 100 120 140 160 180 200-0.2
-0.1
0
0.1
0.2time domain signal (baseband)
sample nr.
imaginaryreal
δf frequency offset
frequency
amplitude
![Page 32: EC744 Wireless Communications Spring 2007](https://reader031.vdocument.in/reader031/viewer/2022021207/620627dc8c2f7b173004f329/html5/thumbnails/32.jpg)
Serialto Parallel
X0
XN-1
x0
xN-1
IFFT
Parallel to
Serialand
add CP
Add CP
WindowingDACRF Section
InputSymbols
OFDM Transmitter
![Page 33: EC744 Wireless Communications Spring 2007](https://reader031.vdocument.in/reader031/viewer/2022021207/620627dc8c2f7b173004f329/html5/thumbnails/33.jpg)
ADCandRemoveCP
Serial toParallel FFT
Parallel to Serialand Decoder
X0
XN-1
x0
xN-1
OutputSymbols
OFDM Receiver
![Page 34: EC744 Wireless Communications Spring 2007](https://reader031.vdocument.in/reader031/viewer/2022021207/620627dc8c2f7b173004f329/html5/thumbnails/34.jpg)
Synchronization
• Timing and frequency offset can influence performance.
• Frequency offset can influence orthogonality of subcarriers.
• Loss of orthogonality leads to Inter Carrier Interference.
![Page 35: EC744 Wireless Communications Spring 2007](https://reader031.vdocument.in/reader031/viewer/2022021207/620627dc8c2f7b173004f329/html5/thumbnails/35.jpg)
Peak to Average Ratio
• Multicarrier signals have high PAR as compared to singlecarrier systems.
• PAR increases with the number of subcarriers.
• Affects power amplifier design and usage.
![Page 36: EC744 Wireless Communications Spring 2007](https://reader031.vdocument.in/reader031/viewer/2022021207/620627dc8c2f7b173004f329/html5/thumbnails/36.jpg)
Peak to Average Power Ratio
![Page 37: EC744 Wireless Communications Spring 2007](https://reader031.vdocument.in/reader031/viewer/2022021207/620627dc8c2f7b173004f329/html5/thumbnails/37.jpg)
![Page 38: EC744 Wireless Communications Spring 2007](https://reader031.vdocument.in/reader031/viewer/2022021207/620627dc8c2f7b173004f329/html5/thumbnails/38.jpg)