Download - EDSA Installation Guide
EDSA Installation Guide
iii
Table Of Contents Installation.............................................................................................................1 System Requirements...........................................................................................1 International Users Important Information.............................................................4 Licensing and installation options .........................................................................5 Installation.............................................................................................................7
Check List Prior to Installation: ..........................................................................7 EDSA Create Administrator ..................................................................................9
Network Installation .........................................................................................11 License Server Installation..................................................................................11 Configuring the EDSA License Server ................................................................14
First, you must contact EDSA and provide the following: ............................14 EDSA Server License Manager ..........................................................................16 EDSA Client License Manager ...........................................................................18 Configuring Workstations for a floating license ...................................................21 License Server installation Issues.......................................................................23 General installation FAQ.....................................................................................24 Uninstalling EDSA License Server......................................................................26
Workstation Installation ...................................................................................27 Installation...........................................................................................................27
Check List Prior to Installation: ........................................................................27 Single Machine Installation .................................................................................29
EDSA Installation Password Request..........................................................30 EDSA Client License Manager ...........................................................................31 General installation FAQ.....................................................................................34 Uninstalling EDSA Technical from a Workstation ...............................................36 Index ...................................................................................................................39
1
Installation
System Requirements
Minimum Workstation Configuration
Hardware Required Intel® Pentium® III Processor
1Ghz of Faster 32MB Graphics Display card
with 32bit color support 20 GB Available Hard Disk
Drive Space 17 inch or larger monitor with
at least 1024x768 display resolution
Parallel, Serial or USB ports Mouse/pointer (Microsoft®
IntelliMouse® recommended); CD-ROM drive Operating System Required Microsoft Windows 2000
Service Pack 4 or Microsoft Windows XP Home
or Professional Edition Service Pack 1
Microsoft .Net Framework RAM Memory Required 512MB Software Required Microsoft Internet Explorer 5.0
or higher Optional Software and
Hardware Sound Card and Speakers Microsoft Office 2000 or
Higher Autodesk Voloview ® Express
Workstation Configuration for 500 Bus Networks
Hardware Required Intel ® Pentium® 4 Processor
2.0GHz or Faster 32MB Graphics Display card
with 32bit color support 40 GB Available Hard Disk
Drive Space 19 inch or larger monitor with
at least 1024x768 display resolution
Parallel, Serial or USB ports Mouse/pointer (Microsoft®
IntelliMouse® recommended); CD-ROM drive Operating System Required Microsoft Windows 2000
Service Pack 4 or Microsoft Windows XP Home
or Professional Edition Service Pack 1
Microsoft .Net Framework RAM Memory Required 512MB Software Required Microsoft Internet Explorer 5.0
or higher Optional Software and
Hardware Sound Card and Speakers Microsoft Office 2000 or
Higher Autodesk Voloview ® Express
Workstation Configuration for 1000- 2000 Bus Networks
Workstation Configuration for Unlimited Network Size Hardware
EDSA Installation Guide
2
Hardware Required Intel ® Pentium® 4 Processor
2.8GHz or Faster 64MB Graphics Display card
with 32bit color support 80 GB Available Hard Disk
Drive Space 21 inch or larger monitor with
at least 1024x768 display resolution
Parallel, Serial or USB ports Mouse/pointer (Microsoft®
IntelliMouse® recommended); CD-ROM drive Operating System Required Microsoft Windows 2000
Service Pack 4 or Microsoft Windows XP Home
or Professional Edition Service Pack 1
Microsoft .Net Framework RAM Memory Required 1GB Software Required Microsoft Internet Explorer 5.0
or higher Optional Software and
Hardware Sound Card and Speakers Microsoft Office 2000 or
Higher Autodesk Voloview ® Express
Required Intel® Xeon™ processors up
to 3.20GHz with 2MB L3 cache
(Dual Capable) 533MHz front side bus
256MB Graphics Display card with 32bit color support
dual monitor DVI or VGA capable
120 GB Available Hard Disk Drive Space
Dual 21 inch or larger monitor with at least 1024x768 display resolution
Parallel, Serial or USB ports Mouse/pointer (Microsoft®
IntelliMouse® recommended); CD-ROM drive Operating System Required Microsoft Windows 2000
Service Pack 4 or Microsoft Windows XP Home
or Professional Edition Service Pack 1
Microsoft .Net Framework RAM Memory Required 4GB-8GB dual-channel DDR
266MHz SDRAM memory Software Required Microsoft Internet Explorer 5.0
or higher Optional Software and
Hardware Sound Card and Speakers Microsoft Office 2000 or
Higher Autodesk Voloview ® Express
o Local Administrator rights are required in order to install EDSA Technical 2005.
o Power User rights or better are required to run EDSA Technical 2005.
Installation
3
Though EDSA-Micro Corporation makes every effort to keep its functionality on the older Microsoft operating systems, the capabilities of the older Windows platforms are easily overloaded by todays graphics-intensive applications. If things are not working OK for you, a large percentage of problems are on systems that are older than Windows 2000. For this reason, we greatly recommend the upgrade of your operating system to Windows 2000 or XP.
EDSA recommends that the working project files be stored on a local hard disk, instead of on a network drive, because the slowdowns in the network are causing many problems in the operation of the program and its storage of data. We recommend that the user back up the files by copying to the network. Your IT staff can help you create a Batch file to copy your projects to the network, and can set this up to be run on a scheduled basis.
EDSA Installation Guide
4
International Users Important Information Regional Settings EDSA provides a robust modeling environment that permits the modeling of a power system with great precision in size and scale. By following these few steps, you will ensure the smooth operation of your EDSA software.
Please go to Start>Settings>Control Panel Choose Regional Options We suggest the following settings under the computers Regional Settings
to resolve these issues related to how comma's and periods are used in Europe that are causing the scaling issues and other anomalies.
Please set the “digit grouping symbol field” under regional settings to a space or blank field.
Also, please select a space or blank field for the “digit grouping symbol field” in the “numbers and currency” menu.
Finally, please set comma in the numbers field. If you do not do set your regional settings correctly, busbars and other length dependant equipment will not display properly and you may get an Actrix.exe graph engine error. This is due to the fact that for example a value of 1.001 (one point 001 meter busbar is read as 1,001 (one thousand one)) which creates graphic rendering problems. Your Regional Settings should appear as shown below. Do not install or use EDSA Technical until these changes have been made.
Installation
5
Licensing and installation options EDSA can be installed under two different configurations, which you can choose from:
Local Host License (default configuration)
A local host license configuration locks the EDSA license to one workstation. This configuration is typically used if EDSA will only be running on a single workstation, a workstation that is not connected to a Windows network, or a laptop that may use EDSA software while not connected to the network
Floating License
The floating license configuration allows you to install EDSA on more workstations than the number of EDSA licenses purchased. An EDSA License Server (simply an NT or Windows 2000 service called EDSA License Server) is installed and configured. The role of this service is to control access to the EDSA licenses by limiting the number of concurrent EDSA users to the number of purchased EDSA licenses.
For example, an engineering company may purchase a 2-seat EDSA Technical license, and configure 10 workstations with EDSA.
The EDSA License Server will allow any of the workstations to run EDSA,
however, it will not allow any more than 2 workstations to use EDSA at one time.
EDSA uses the FlexLM license management technology from Macrovision. To learn more, you may go to the following link: http://www.macrovision.com/solutions/esd/index.html
The floating license configuration requires:
a Windows NT or 2000/2003 network configured with TCP/IP and static IP address for the license server.
A server or workstation running Windows 2000/2003 or Windows NT 4 (Service Pack 6) or higher, that is configured as the EDSA License Server is also required.
EDSA Installation Guide
6
DO NOT INSTALL EDSA TECHNICAL AND THE EDSA LICENSE SERVER ON THE SAME WORKSTATION.
Compaq Teaming
FlexLM is unable to grab the HostID when Compaq Teaming is enabled. Therefore, this is not a valid configuration for EDSA License Server since FlexLM does not support Compaq Teaming.
The EDSA Client License Manager manages EDSA Technical licensing on Single user workstations. See the section EDSA Client License Manager for more information about this licensing component. The EDSA Server License Manager manages EDSA Technical licensing in a networked environment with an EDSA License Server. See the section EDSA Client Server Manager for more information about this licensing component.
Installation
7
Installation This section describes how to install the EDSA Technical software package. Please read all the sections about installation and EDSA licensing before attempting to install EDSA Technical Before installing EDSA, please exit all programs and turn off any virus detection and screen saver software running on your workstation.
Check List Prior to Installation:
Please have your EDSA License Certificate in front of you. During
installation, you will be asked to type in the serial number exactly as it appears on the EDSA License certificate.
o Important information for International users - Must Read First to
make sure regional settings are set properly.
By default, EDSA Technical is installed with a 14-day demo license. Your license will expire within 14 days unless you contact EDSA for a password that enables the software for the package you are licensed for.
You will have to provide EDSA with your Host ID in order to receive the
required password.
Only one (1) password will be given out per license purchased, so make sure that you are installing EDSA on the workstation you intend to use.
Make sure your screen resolution is set to 1024x768 16-bit color as
minimum.
Make sure you have Internet Explorer 5.5 or higher installed on your PC.
Users must make sure that they have local administrator rights on the
workstation where they are installing EDSA, otherwise EDSA will not install properly.
EDSA Technical 2000 will not coexist with older versions of EDSA software. The EDSA Technical installer will remove previous versions of EDSA from your workstation or upgrade a previous version of EDSA Technical to the new
versions.
EDSA Installation Guide
8
Installation
9
EDSA Create Administrator The EDSA Create Administrator utility allows you to create an EDSA administrator account. The role of the EDSA administrator is to maintain EDSA user accounts, and to govern access control to the EDSA database by granting EDSA users certain access rights.
In the event that the EDSA administrator account password is lost or forgotten, the EDSA Create Administrator utility may be run without re-installing EDSA Technical.
The utility can be found on your EDSA Technical CD under the Utilities
folder, called CreateAdmin.exe. The EDSA Create Administrator utility is shown below.
Once you have an administrator account established, you can then use this account to create additional administrators or other user accounts. This feature is used to control access to project drawings and the database. Privileges are assigned by project managers for the project. They are assigned to users who have been created by Administrators. Privileges
Reader Writer Manager Read OK OK OK Write No OK OK
Delete No OK OK Approve No No OK
EDSA Installation Guide
10
Change No No OK Approval considerations only apply if data protection is enabled.
Installation
11
Network Installation
License Server Installation By installing a license server, you will be able to "float" licenses to any PC in your network.
The floating license configuration requires:
a Windows NT or 2000/2003 network configured with TCP/IP and static IP address for the license server.
A server or workstation running Windows 2000/2003 or Windows NT 4 (Service Pack 6) or higher, that is configured as the EDSA License Server is also required.
DO NOT INSTALL EDSA TECHNICAL AND THE EDSA LICENSE SERVER
ON THE SAME WORKSTATION.
You must physically be at the server you wish to install the license
manager on.
Exit all programs and turn off any virus detection and screen-saver software on your server. This prevents possible conflicts between the EDSA License Server installer and other programs.
Make sure that you have local administrator rights on the workstation or
server where you are installing EDSA License Server, otherwise the installer will not run.
Insert the EDSA Technical CD into your CD-ROM drive. Cancel the
EDSA Technical installer if it starts.
Click Start from the taskbar and select Run. In the Run window, type x:\LicenseServer\setup (where x: is the drive containing the EDSA Technical CD), then click OK.
Once the installer launches, it will check to make sure the version of
Windows Installer on your workstation is up-to-date. For workstations where Windows Installer isn’t installed, the EDSA License Server installer will update the version of Windows Installer and then ask to reboot your
EDSA Installation Guide
12
workstation. You must reboot your workstation once these changes have been made otherwise the EDSA software will not install.
After the Windows Installer is up to date, you will see the Welcome Screen
as shown. Follow the screen instructions:
Select “Complete” or “Custom” from the Setup Type window . Choosing “Complete” setup (the default selection) will install EDSA License Server under C:\EDSALicenseServer. This requires approximately 3MB free disk space.
Choosing “Custom” allows you to change the install path of EDSA License
Server.
After EDSA License is successfully installed, leave “Configure EDSA License Server” checked to launch the EDSA Server License Manager (covered in a later section entitled EDSA Server License Manager), and press the “Finish” button.
Compaq Teaming
FlexLM is unable to grab the HostID when Compaq Teaming is enabled. Therefore, this is not a valid configuration for EDSA License Server since FlexLM does not support Compaq Teaming.
Installation
13
EDSA Installation Guide
14
Configuring the EDSA License Server First, you must contact EDSA and provide the following:
o Serial Number listed in your EDSA License Certificate. o Host ID as it appears in the SLM main window. o Package plus the # of licenses listed in your EDSA License Certificate. o Additional programs plus the number of licenses you’ve purchased. From the SLM interface:
Select the “Configure Package” button to open the Configure Package License window.
Choose your package from the pull-down list, enter the number of concurrent (floating) licenses purchased, and then type the password obtained from EDSA.
Click the OK button to go back to the main SLM window. Note: The “OK” button will remain disabled unless the correct password is typed in.
Configure additional programs by selecting “Configure Programs” and
entering the appropriate information in the Configure Program License window.
Installation
15
Once the EDSA License Server has been configured correctly, it should look similar to the figure below. which shows the EDSA License Server with IP address 192.168.1.3 configured with CORE_100 package. Harmonics and Block-Based Reliability programs are configured as add-ons to CORE_100.
Clicking “Generate License” from SLM main window will create the EDSA License Server license. The “View edsalm.log” and “View License File” buttons are typically used for diagnostic purposes.
Successful generation of the license results in the Success window shown
below. The SLM also starts the EDSA License Server service automatically.
EDSA Installation Guide
16
EDSA Server License Manager The EDSA Server License Manager (SLM) program is installed on your server with the EDSA License Server installation, allowing you to configure the EDSA License Server. The SLM can be launched at the end of the EDSA License Server installation or anytime by choosing the EDSA->EDSA Server License Manager shortcut from your Start Menu->Programs Menu. The EDSA SLM is shown below:
The SLM shows the current EDSA license server configuration. The “Serial Number” field can be modified in the event that the EDSA serial number was entered improperly during the installation. The “Host ID” field is read-only and will be different for each server. The server IP address is automatically filled in based on the server’s current TCP/IP configuration. By default, the EDSA License Server isn’t started until it is properly configured using the SLM. EDSA Technical workstations configured using a floating license will not run until the EDSA License Server is configured and running. Where does the Host ID come from? The Host ID is the last 8 characters of the MAC address of the network card SLM sees. If you have multiple network cards, it is important that the Host ID match
Installation
17
the network card connected to the EDSA workstations, otherwise the license manager will not function properly. What can I do if SLM is seeing the wrong card? FlexLM looks for the first NIC card in the system when locking to the MAC address. If the first NIC happens to be configured as the backup system, then what you can do is the following: Install license server and see which network card FlexLM picks up by looking at the HOST ID in EDSA server license manager. Match the HOST ID with the last 8 digits of the MAC address to find which NIC it is. If it's the wrong NIC, then swap the IP addresses of the NIC's so that the FlexLM-recognized-NIC is the one serving the users, not the backups.
EDSA Installation Guide
18
EDSA Client License Manager The EDSA Client License Manager (CLM) program is installed on your workstation with the EDSA Technical installation, allowing you to configure the EDSA client workstation’s license. The CLM can be launched at the end of the EDSA Technical installation or anytime by choosing the EDSA->Licensing->EDSA Client License Manager shortcut from your Start Menu->Programs Menu. T
Show me how The EDSA CLM is shown below:
The CLM shows the current EDSA license configuration for the workstation. The “Serial Number” field can be modified in the event that the EDSA serial number was entered improperly during the installation. The “Host ID” field is read-only and will be different for each workstation. The default EDSA license installed with a new EDSA Technical workstation is a demo license, which expires 14 days after the install. The license for the
Installation
19
workstation should be configured as soon as possible before the demo license expires. The EDSA license can be configured 2 ways, as discussed in the previous EDSA Licensing section: Local Host License and Floating License. Configuring a Local Host License
Make sure the “Local Host License” button is selected. Obtain package and optional program passwords from EDSA to enable
the desired EDSA Technical components.
EDSA must be contacted in order to obtain passwords
You must provide EDSA with the following:
o Serial Number listed in your EDSA License Certificate. o Host ID as it appears in the CLM main window. o Package listed in your EDSA License Certificate. o Additional programs you’ve purchased.
Select the “Configure Package” button to open the Configure Package
License window (See below). Choose your package from the pull-down list, then type the password
obtained from EDSA.
Click the OK button to go back to the main CLM window. Note: The “OK” button will remain disabled unless the correct password is typed in.
Configure additional programs by selecting “Configure Programs” and
entering the appropriate information in the Configure Program License window.
To include add-on programs click on the Configure Program button, select the add-on program as shown on your EDSA License Certificate, and provide the password for each add-on.
EDSA Installation Guide
20
After all package and program information has been entered, click the “Generate License” button.
The Success window shown below will appear once the license has been
generated for the EDSA Technical workstation.
Installation
21
Configuring Workstations for a floating license Note: Before configuring an EDSA Technical 2000 workstation to use
a floating license, you must make sure an EDSA License Server has been installed on your local network.
Install EDSA Technical for all client workstations using the instructions in
the section entitled “Single Machine Installation”.
Do not install EDSA Technical on the same machine where the EDSA License Server is installed.
Run the EDSA Client License Manager and configure using instructions in
the section entitled “EDSA Client License Manager”. Configure licenses as “Use License Server”.
Make sure the “Use License Server” button is selected.
Use the “Configured Package” pull-down field to choose the package that
the EDSA License Server is to be configured with.
Enter the network name or IP address of the server where the EDSA License Server is running. Figure below shows an example of the proper way to configure a floating license for a server named “Server-1” configured to use the CORE_100 package.
EDSA Installation Guide
22
Click on the “Generate License” button to generate the floating license for the EDSA Technical workstation.
Installation
23
License Server installation Issues Installing on Server with Two NIC Cards FlexLM looks for the first NIC card in the system when locking to the MAC address. If the wrong card is being selected, you can do the following:
Install license server and see which network card FlexLM picks up by looking at the HOST ID in EDSA server license manager.
Match the HOST ID with the last 8 digits of the MAC address to find which
NIC it is. If it's the wrong NIC, then swap the IP addresses of the NIC's so that the FlexLM-recognized-NIC is the one serving the users.
DO NOT INSTALL EDSA TECHNICAL AND THE EDSA LICENSE SERVER
ON THE SAME WORKSTATION.
Compaq Teaming
FlexLM is unable to grab the HostID when Compaq Teaming is enabled. Therefore, this is not a valid configuration for EDSA License Server since FlexLM does not support Compaq Teaming.
EDSA Installation Guide
24
General installation FAQ Frequently Asked Questions and Answers to them
Error -214722024 Getting Passwords
Corrupt Toolbars MS Explorer Requirements
When I try to run EDSA Technical I get an Error "Microsoft Visual Basic for Applications Error -214722024 invalid index specified" how can I fix this?
The error occurs if the software was installed by an Administrator and then a different user logs on and tries to run the application.
Please make sure user has Power User rights on the PC. Next, follow these steps.
Exit EDSA and log on under the end user account name. From the Start button choose Programs>EDSA>Rebuild EDSA Toolbar. EDSA will launch and properly configure its environment for the end user.
Show me how
Why does this occur?
The EDSA User Interface (UI) is defined based on a user profile. The changes to the EDSA UI are 'per user" so if the Administrator has logged on and loaded the software, the toolbars are set for that account. When another user logs on, they now have the above procedure to add the interface buttons for themselves. AutoCAD user 'profiles' act similarly.
My toolbar icons are all blank or appear as a row of Autodesk A icons, how can I fix this?
Please make sure user has Power User rights on the PC. Next, follow
these steps. Exit EDSA and log on under the end user account name. From the Start button choose Programs>EDSA>Rebuild EDSA Toolbar. EDSA will launch and properly configure its environment for the end user.
Show me how
Installation
25
How do I get a password for my Technical Installation?
Please call: 1-858-675-9211 extension 201, 204, 205 or 208 email: [email protected] Fax: 1-858-675-9724 with your serial number, host ID, package type and indicate local machine or server install
Why does EDSA Technical require Microsoft Internet Explorer?
The Help files that accompany Technical use Microsoft Internet Explorer technology and require that this application be installed and running.
EDSA Installation Guide
26
Uninstalling EDSA License Server The EDSA License Server can be uninstalled from a machine using the following steps: Using the Add/Remove Programs Applet 1. Open the Add/Remove Programs applet in Control Panel. 2. Select EDSA License Manager from list of programs and click the “Remove” button.
Installation
27
Workstation Installation
Installation This section describes how to install the EDSA Technical software package. Please read all the sections about installation and EDSA licensing before attempting to install EDSA Technical Before installing EDSA, please exit all programs and turn off any virus detection and screen saver software running on your workstation.
Check List Prior to Installation:
Please have your EDSA License Certificate in front of you. During
installation, you will be asked to type in the serial number exactly as it appears on the EDSA License certificate.
o Important information for International users - Must Read First to
make sure regional settings are set properly.
By default, EDSA Technical is installed with a 14-day demo license. Your license will expire within 14 days unless you contact EDSA for a password that enables the software for the package you are licensed for.
You will have to provide EDSA with your Host ID in order to receive the
required password.
Only one (1) password will be given out per license purchased, so make sure that you are installing EDSA on the workstation you intend to use.
Make sure your screen resolution is set to 1024x768 16-bit color as
minimum.
Make sure you have Internet Explorer 5.5 or higher installed on your PC.
Users must make sure that they have local administrator rights on the
workstation where they are installing EDSA, otherwise EDSA will not install properly.
EDSA Installation Guide
28
EDSA Technical 2000 will not coexist with older versions of EDSA software. The EDSA Technical installer will remove previous versions of EDSA from your workstation or upgrade a previous version of EDSA Technical to the new
versions.
Installation
29
Single Machine Installation The following instructions are a quick overview of the steps required to successfully install EDSA Technical for the first time.
Exit all programs and turn off any virus detection and screen-saver software on your workstation. This prevents possible conflicts between the EDSA Technical installer and other programs.
Make sure that you have local administrator rights on the workstation you
are installing EDSA Technical; otherwise the installer will not run.
Insert the EDSA Technical CD into your CD-ROM drive.
The EDSA Technical installer should automatically start but if it doesn't, click Start from the taskbar and select Run. In the Run window, type x:\setup (where x: is the drive containing the EDSA Technical CD), then click OK.
Please follow the screen instructions.
Important: The installation folder must not have any spaces or periods in it, as this will cause problems in the EDSA Technical environment.
After EDSA Technical is successfully installed, you can un-check “Configure EDSA Client License” and the software will run in DEMO mode for 14 days. You will have 14 days to contact us for a password.
If you leave “Configure EDSA Client License” checked, it will launch the
EDSA Client License Manager (covered in a later section entitled EDSA Client License Manager).
You may choose to un-check the “Create Admin Account”. If you leave
the “Create EDSA Admin Account” checked it will launch the EDSA Create Administrator utility (covered a later section entitled EDSA Create Administrator) you will be asked to assign a system administrator account.
NOTE TO SYSTEM ADMINISTRATORS AND IT SPECIALISTS
EDSA Installation Guide
30
It is recommended that you install the software under the actual end users logon account for the PC. This may require you to give temporary local administrator privileges under the end users name. You may revert back to Power User rights after installation. If someone other than the actual end user is logged onto the PC and is loading the software you must follow these additional steps after installation in order to properly configure the software for the end user: Please ensure resolution is set to at least 1024x768 and End user account has at least Power User rights on the PC. Next, follow these steps.
Log out as Administrator and log back in under the user account that will be using EDSA.
From the Start button choose Programs>EDSA>Rebuild EDSA Toolbar. EDSA will launch and properly configure its environment for the end user.
Show me how
EDSA Installation Password Request
Phone: (858) 675-9211 ext. 201, 204 or 208 8am-5pm PST Fax: (858) 675-9724 24 hours Email: [email protected]
At the end of the installation the program asks if I wish to assign an administrator account, should I?
You may hit cancel and use the program as is. This feature is provided for those who wish to assign administrators, managers, and other rights and privileges to those accessing EDSA drawings and data. Press the “Finish” button. EDSA Technical will temporarily launch to establish user profile and toolbars and then automatically shut down. As a final step, your workstation must be restarted to complete the configuration changes required by EDSA Technical.
Installation
31
EDSA Client License Manager The EDSA Client License Manager (CLM) program is installed on your workstation with the EDSA Technical installation, allowing you to configure the EDSA client workstation’s license. The CLM can be launched at the end of the EDSA Technical installation or anytime by choosing the EDSA->Licensing->EDSA Client License Manager shortcut from your Start Menu->Programs Menu. T
Show me how The EDSA CLM is shown below:
The CLM shows the current EDSA license configuration for the workstation. The “Serial Number” field can be modified in the event that the EDSA serial number was entered improperly during the installation. The “Host ID” field is read-only and will be different for each workstation. The default EDSA license installed with a new EDSA Technical workstation is a demo license, which expires 14 days after the install. The license for the
EDSA Installation Guide
32
workstation should be configured as soon as possible before the demo license expires. The EDSA license can be configured 2 ways, as discussed in the previous EDSA Licensing section: Local Host License and Floating License. Configuring a Local Host License
Make sure the “Local Host License” button is selected. Obtain package and optional program passwords from EDSA to enable
the desired EDSA Technical components.
EDSA must be contacted in order to obtain passwords
You must provide EDSA with the following:
o Serial Number listed in your EDSA License Certificate. o Host ID as it appears in the CLM main window. o Package listed in your EDSA License Certificate. o Additional programs you’ve purchased.
Select the “Configure Package” button to open the Configure Package
License window (See below). Choose your package from the pull-down list, then type the password
obtained from EDSA.
Click the OK button to go back to the main CLM window. Note: The “OK” button will remain disabled unless the correct password is typed in.
Configure additional programs by selecting “Configure Programs” and
entering the appropriate information in the Configure Program License window.
To include add-on programs click on the Configure Program button, select the add-on program as shown on your EDSA License Certificate, and provide the password for each add-on.
Installation
33
After all package and program information has been entered, click the “Generate License” button.
The Success window shown below will appear once the license has been
generated for the EDSA Technical workstation.
EDSA Installation Guide
34
General installation FAQ Frequently Asked Questions and Answers to them
Error -214722024 Getting Passwords
Corrupt Toolbars MS Explorer Requirements
When I try to run EDSA Technical I get an Error "Microsoft Visual Basic for Applications Error -214722024 invalid index specified" how can I fix this?
The error occurs if the software was installed by an Administrator and then a different user logs on and tries to run the application.
Please make sure user has Power User rights on the PC. Next, follow these steps.
Exit EDSA and log on under the end user account name. From the Start button choose Programs>EDSA>Rebuild EDSA Toolbar. EDSA will launch and properly configure its environment for the end user.
Show me how
Why does this occur?
The EDSA User Interface (UI) is defined based on a user profile. The changes to the EDSA UI are 'per user" so if the Administrator has logged on and loaded the software, the toolbars are set for that account. When another user logs on, they now have the above procedure to add the interface buttons for themselves. AutoCAD user 'profiles' act similarly.
My toolbar icons are all blank or appear as a row of Autodesk A icons, how can I fix this?
Please make sure user has Power User rights on the PC. Next, follow
these steps. Exit EDSA and log on under the end user account name. From the Start button choose Programs>EDSA>Rebuild EDSA Toolbar. EDSA will launch and properly configure its environment for the end user.
Show me how
Installation
35
How do I get a password for my Technical Installation?
Please call: 1-858-675-9211 extension 201, 204, 205 or 208 email: [email protected] Fax: 1-858-675-9724 with your serial number, host ID, package type and indicate local machine or server install
Why does EDSA Technical require Microsoft Internet Explorer?
The Help files that accompany Technical use Microsoft Internet Explorer technology and require that this application be installed and running.
EDSA Installation Guide
36
Uninstalling EDSA Technical from a Workstation Using the Add/Remove Programs Applet 1. Open the Add/Remove Programs applet in Control Panel. 2. Select EDSA Technical from list of programs and click the “Change” button. 3. At the Welcome screen click next go to the Program Maintenance screen. 4. Choose the “Remove” option to remove EDSA Technical completely from your workstation.
Show me how Microsoft Windows Install Cleanup (Windows 2000 and XP Only) If you are having difficulty removing EDSA, or you inadvertently deleted the program files and the add/remove applet is not working, you may use an included utility from Microsoft.
From the EDSA CD, go to the Misc folder and choose the Cleanup Folder. Choose the Win NT folder to access the version of this program for
Windows 2000 You will see a single executable file, double click on this to run the
Windows Install Cleanup Installer. Once installed, from the Start>Programs menu launch the Windows Install
Cleanup program. Select and remove any version of EDSA or Autodesk Actrix. This tool will completely remove any reference to EDSA from the registry.
You can also download this tool from Microsoft web site at: http://download.microsoft.com/download/office2000pro/util20/1/NT4/EN-US/msicuu.exe IMPORTANT: The Msicu.exe and Msicuu.exe (Windows Installer CleanUp) utilities are not supported on computers on which Microsoft Windows Installer 2.0 or later is installed, including Microsoft Windows XP. Follow these steps to verify your version of the Windows Installer:
Installation
37
Locate the Msi.dll file on your computer. By default, this file is in the Winnt\System32 folder on Microsoft Windows 2000 based computers.
Right-click the Msi.dll file, and then click Properties.
Click the Version tab. If your version is earlier than 2.0, the Windows
Installer CleanUp utility is supported on your computer. Microsoft Document Info: Microsoft Knowledge Base Article - 329369 Keywords: kbprb kbsetup kbui KB329369
39
Index 1 1.001
value............................................ 4 1024x768 ...................................... 29 1024x768 16-bit
set ......................................... 7, 27 1024x768 16bit ............................... 1 1024x768 16-bit .............................. 7 1024x768 16-bit ............................ 27 14-day....................................... 7, 27 2 2-seat EDSA Technical
purchase ..................................... 5 2-seat EDSA Technical................... 5 3 3MB .............................................. 11 5 512MB RAM ................................... 1 8 8am-5pm PST............................... 29 A Accessing
EDSA .................................... 5, 29 Accessing ....................................... 5 Accessing ..................................... 29 Actrix.exe
get ............................................... 4 Actrix.exe ........................................ 4 Add/remove applet........................ 36 Add/Remove Programs Applet
Open ................................... 26, 36 Add/Remove Programs Applet...... 26 Add/Remove Programs Applet...... 36 Add-ons
CORE_100................................ 14 Add-ons ........................................ 14 Administrator................. 9, 24, 29, 34 After EDSA License ...................... 11 After EDSA Technical ................... 29 Answers .................................. 24, 34 Applications Error
Microsoft Visual Basic ......... 24, 34
Applications Error..........................24 Applications Error..........................34 AutoCAD .................................24, 34 Autodesk
row.......................................24, 34 Autodesk .......................................24 Autodesk .......................................34 Autodesk Actrix .............................36 B Back
Power User................................29 Back ..............................................29 Batch file
create...........................................1 Batch file .........................................1 Better...............................................1 Bitmap file ...............................24, 34 Block-Based Reliability..................14 Busbar.............................................4 Busbars ...........................................4 C C 11 Cancel
EDSA Technical.........................11 Cancel ...........................................11 CD-ROMs............................1, 11, 29 Change..........................................36 Changing
EDSA UI ..............................24, 34 Changing.......................................24 Changing.......................................34 Check List Prior
Installation .............................7, 27 Check List Prior...............................7 Check List Prior.............................27 Choose
Cleanup Folder ..........................36 EDSA->EDSA Server License
Manager.................................16 EDSA->Licensing->EDSA Client
License Manager..............18, 31 Win NT.......................................36
EDSA Installation Guide
40
Choose ......................................... 16 Choose ......................................... 18 Choose ......................................... 31 Choose ......................................... 36 Choose Regional Options ............... 4 Cleanup Folder
choose....................................... 36 Cleanup Folder ............................. 36 CLM ........................................ 18, 31 CLM window ........................... 18, 31 Compaq Teaming ............... 5, 11, 23 Complete ...................................... 11 Configure EDSA Client License .... 29 Configure EDSA License Server... 11 Configure Package ........... 14, 18, 31 Configure Package License window
...................................... 14, 18, 31 Configure Program button....... 18, 31 Configure Program License window
...................................... 14, 18, 31 Configure Programs.......... 14, 18, 31 Configured Package ..................... 21 Configuring
EDSA License Server................ 14 EDSA Technical 2000 ............... 21 Local Host License .............. 18, 31 Workstations.............................. 21
Configuring ................................... 14 Configuring ................................... 18 Configuring ................................... 21 Configuring ................................... 31 Containing
EDSA Technical CD............ 11, 29 Containing..................................... 11 Containing..................................... 29 Control
EDSA .......................................... 9 Control ............................................ 9 Control Panel .......................... 26, 36 CORE_100
add-ons ..................................... 14 use ............................................ 21
CORE_100 ................................... 14 CORE_100 ................................... 21 Create Admin Account .................. 29 Create EDSA Admin Account ....... 29
CreateAdmin.exe ............................9 Creating
Batch file......................................1 EDSA...........................................9 EDSA License Server ................14
Creating...........................................1 Creating...........................................9 Creating.........................................14 Custom..........................................11 D Decimal Symbol ..............................4 DEMO ...........................................29 Digit Group ......................................4 Digit Grouping Symbol ....................4 DO NOT INSTALL EDSA
TECHNICAL AND THE EDSA LICENSE SERVER ON THE SAME WORKSTATION...5, 11, 23
E EDSA
access ...................................5, 29 control..........................................9 create...........................................9 granting........................................9 installing.................................7, 27 number ........................................5 removing....................................36
EDSA ..........................................1, 4 EDSA ..............................................5 EDSA ..............................................7 EDSA ..............................................9 EDSA ............................................11 EDSA ............................................14 EDSA ............................................16 EDSA ............................................18 EDSA ............................................23 EDSA ............................................24 EDSA ............................................27 EDSA ............................................29 EDSA ............................................31 EDSA ............................................34 EDSA ............................................36 EDSA CD ......................................36 EDSA Client License Manager
launch ........................................29 Run............................................21
Index
41
EDSA Client License Manager . 5, 18 EDSA Client License Manager ..... 21 EDSA Client License Manager ..... 29 EDSA Client License Manager ..... 31 EDSA Client Server Manager ......... 5 EDSA CLM ............................. 18, 31 EDSA Create Administrator
launch........................................ 29 EDSA Create Administrator ............ 9 EDSA Create Administrator .......... 29 EDSA Installation Password Request
.................................................. 29 EDSA License............... 7, 18, 27, 31 EDSA License Certificate... 7, 14, 18,
27, 31 EDSA License Server
Configuring................................ 14 create ........................................ 14 end ............................................ 16 installing .................................... 11 shows ........................................ 14 starts ......................................... 14
EDSA License Server ..................... 5 EDSA License Server ................... 11 EDSA License Server ................... 14 EDSA License Server ................... 16 EDSA License Server ................... 21 EDSA License Server ................... 23 EDSA License Server ................... 26 EDSA License Server isn’t ............ 16 EDSA Server License Manager
launch........................................ 11 EDSA Server License Manager ...... 5 EDSA Server License Manager .... 11 EDSA Server License Manager .... 16 EDSA SLM.................................... 16 EDSA Technical
Cancel ....................................... 11 end ...................................... 18, 31 generated ............................ 18, 31 install ............................... 7, 27, 29 re-installing.................................. 9
EDSA Technical.......................... 4, 5 EDSA Technical.............................. 7 EDSA Technical.............................. 9 EDSA Technical............................ 11
EDSA Technical ............................16 EDSA Technical ............................18 EDSA Technical ............................21 EDSA Technical ............................24 EDSA Technical ............................27 EDSA Technical ............................29 EDSA Technical ............................31 EDSA Technical ............................34 EDSA Technical ............................36 EDSA Technical 2000
configuring .................................21 EDSA Technical 2000 .................1, 7 EDSA Technical 2000 ...................21 EDSA Technical 2000 ...................27 EDSA Technical CD
containing ............................11, 29 Insert....................................11, 29
EDSA Technical CD........................9 EDSA Technical CD......................11 EDSA Technical CD......................29 EDSA UI
changes ...............................24, 34 EDSA UI........................................24 EDSA UI........................................34 EDSA User Interface...............24, 34 EDSA->EDSA Server License
Manager choosing ....................................16
EDSA->EDSA Server License Manager ....................................16
EDSA->Licensing->EDSA Client License Manager choosing ..............................18, 31
EDSA->Licensing->EDSA Client License Manager .......................18
EDSA->Licensing->EDSA Client License Manager .......................31
EDSALicenseServer......................11 EDSAT2K>Actrix>System>CBBB.b
mp........................................24, 34 Email .................................24, 29, 34 End
EDSA License Server ................16 EDSA Technical...................18, 31
End................................................16 End................................................18
EDSA Installation Guide
42
End ............................................... 29 End ............................................... 31 Error
get ....................................... 24, 34 Error.............................................. 24 Error.............................................. 34 Exit EDSA ............................... 24, 34 Ext................................................. 29 F Faster PC........................................ 1 Finish ...................................... 11, 29 FlexLM .......................... 5, 11, 16, 23 FlexLM-recognized-NIC .......... 16, 23 Floating
license ................................... 5, 21 Floating ........................................... 5 Floating ......................................... 21 Frequently Asked Questions... 24, 34 G General installation FAQ......... 24, 34 Generate License........ 14, 18, 21, 31 Generating
EDSA Technical .................. 18, 31 Generating .................................... 18 Generating .................................... 31 Get
Actrix.exe .................................... 4 Error .................................... 24, 34
Get .................................................. 4 Get ................................................ 24 Get ................................................ 34 Gigabyte Free Hard Disk Space ..... 1 Grab
HostID ............................. 5, 11, 23 Grab................................................ 5 Grab.............................................. 11 Grab.............................................. 23 Granting
EDSA .......................................... 9 Granting .......................................... 9 Graphics-intensive .......................... 1 H Help ........................................ 24, 34 Host ID.............................. 16, 18, 31
Match .................................. 16, 23 Host ID............................................ 7
Host ID ..........................................16 Host ID ..........................................23 Host ID ..........................................27 HostID
grab .................................5, 11, 23 HostID .............................................5 HostID ...........................................11 HostID ...........................................23 I ID.............................................24, 34 IMPORTANT .................................36 Include
Microsoft Windows XP...............36 Include...........................................36 Insert
EDSA Technical CD ............11, 29 Insert .............................................11 Insert .............................................29 Install
EDSA.....................................7, 27 EDSA License Server ................11 EDSA Technical...............7, 27, 29
Install...............................................7 Install.............................................11 Install.............................................27 Install.............................................29 Install EDSA Technical..................21 Installation
Check List Prior .....................7, 27 Installation .......................................7 Installation .....................................27 Installation options...........................5 International Users Important
Information...................................4 Internet Explorer 5.5..................7, 27 IP
swap ....................................16, 23 IP 5, 11, 14 IP 16 IP 21 IP 23 IT 1 K Kbprb kbsetup kbui KB329369......36 L Launch
Index
43
EDSA Client License Manager.. 29 EDSA Create Administrator....... 29 EDSA Server License Manager. 11
Launch .......................................... 11 Launch .......................................... 29 License
floating................................... 5, 21 License ........................................... 5 License ......................................... 21 License Server Installation............ 11 License Server installation Issues. 23 LicenseServer/setup ..................... 11 List Separator ................................. 4 Listen
Tutorials ...................................... 1 Listen .............................................. 1 Local Administrator ......................... 1 Local Host License.................. 18, 31
Configuring.......................... 18, 31 Local Host License.......................... 5 Local Host License........................ 18 Local Host License........................ 31 Locate
Msi.dll file .................................. 36 Locate ........................................... 36 Locking
MAC .................................... 16, 23 Locking ......................................... 16 Locking ......................................... 23 Logon............................................ 29 M MAC
locking ................................. 16, 23 MAC.............................................. 16 MAC.............................................. 23 Macrovision..................................... 5 Match
HOST ID.............................. 16, 23 Match ............................................ 16 Match ............................................ 23 Microsoft ................................... 1, 36 Microsoft Document Info ............... 36 Microsoft Internet Explorer...... 24, 34 Microsoft Internet Explorer 5.5........ 1 Microsoft Knowledge Base Article. 36 Microsoft Office 2000 ...................... 1
Microsoft Visual Basic Applications Error ................24, 34
Microsoft Visual Basic ...................24 Microsoft Visual Basic ...................34 Microsoft Windows 2000 ...............36 Microsoft Windows Install Cleanup36 Microsoft Windows Installer 2.0.....36 Microsoft Windows XP
including ....................................36 Microsoft Windows XP ..................36 Microsoft® IntelliMouse® ................1 Misc...............................................36 Mouse/pointer .................................1 Msi.dll file
Locate........................................36 Msi.dll file ......................................36 Msicu.exe ......................................36 Msicuu.exe ....................................36 My EDSA.................................24, 34 N NIC..........................................16, 23 NOTE TO SYSTEM
ADMINISTRATORS AND IT SPECIALISTS ...........................29
NT ...................................................5 Number
EDSA...........................................5 Number ...........................................5 Numbers Tab ..................................4 O O Additional.......................14, 18, 31 O Host ID ..........................14, 18, 31 O Package ........................14, 18, 31 O Serial Number ...............14, 18, 31 OK.....................................14, 18, 31
working ........................................1 OK...................................................1 OK...................................................9 OK.................................................11 OK.................................................29 OK button ..........................14, 18, 31 Open
Add/Remove Programs applet..26, 36
Open .............................................26 Open .............................................36
EDSA Installation Guide
44
P PC..................... 7, 11, 24, 27, 29, 34 Pentium III 1.1Ghz .......................... 1 Period ............................................. 4 Power User
back........................................... 29 Power User ............................... 1, 24 Power User ................................... 29 Power User ................................... 34 Program
Windows 2000........................... 36 Program ........................................ 36 Program Maintenance................... 36 Programs>EDSA>Rebuild EDSA
Toolbar .......................... 24, 29, 34 Properties ..................................... 36 Purchase
2-seat EDSA Technical ............... 5 Purchase......................................... 5 R Regional Settings............................ 4 Re-installing
EDSA Technical .......................... 9 Re-installing .................................... 9 Remove .................................. 26, 36
EDSA ........................................ 36 Remove ........................................ 36 Row
Autodesk ............................. 24, 34 Row............................................... 24 Row............................................... 34 Run
EDSA Client License Manager.. 21 Windows 2000....................... 5, 11 Windows Install Cleanup Installer
............................................... 36 Run ................................................. 5 Run ............................................... 11 Run ............................................... 21 Run ............................................... 29 Run ............................................... 36 Run window ............................ 11, 29 S See
Welcome Screen ....................... 11 See ............................................... 11
Select ............................................11 Select EDSA License Manager .....26 Select EDSA Technical .................36 Separator Symbol............................4 Serial Number ...................16, 18, 31 Server............................................23 Server’s .........................................16 Server-1 ........................................21 Service Pack .............................5, 11 Set
1024x768 16-bit .....................7, 27 Set...................................................7 Set.................................................27 Setup Type window.......................11 Shows
EDSA License Server ................14 Shows ...........................................14 Single ..............................................5 Single Machine Installation............29 SLM.........................................14, 16 SLM window..................................14 Sound Card .....................................1 Speakers .........................................1 Start button........................24, 29, 34 Start Menu->Programs Menu.16, 18,
31 Start>Programs menu ...................36 Start>Settings>Control Panel..........4 Starting
EDSA License Server ................14 Starting..........................................11 Starting..........................................14 Starting..........................................29 Success window................14, 18, 31 Swap
IP 16, 23 Swap .............................................16 Swap .............................................23 System Requirements.....................1 T T 18, 31 Taskbar ...................................11, 29 TCP/IP.................................5, 11, 16 Technical.................................24, 34 Technical Installation...............24, 34 Though EDSA-Micro Corporation....1
Index
45
Toolbars............................ 24, 29, 34 Tutorials
listen............................................ 1 Tutorials .......................................... 1 Two NIC Cards ............................. 23 U UI ............................................ 24, 34 Uninstalled .................................... 26 Uninstalling EDSA License Server 26 Uninstalling EDSA Technical ........ 36 Use
CORE_100................................ 21 Use ............................................... 21 Use License Server....................... 21 Utility ............................................... 9 V Values
1.001 ........................................... 4 Values............................................. 4 Version.......................................... 36 View edsalm.log............................ 14 View License File .......................... 14 W Welcome....................................... 36 Welcome Screen
see ............................................ 11 Welcome Screen........................... 11 Win NT
Choose...................................... 36 Win NT.......................................... 36 WINDOWS.................................. 1, 5 Windows 2000
program..................................... 36
running...................................5, 11 Windows 2000.................................1 Windows 2000.................................5 Windows 2000...............................11 Windows 2000...............................36 Windows 2000 Only ......................36 Windows 2000 Service Pack...........1 Windows Install Cleanup...............36 Windows Install Cleanup Installer
run .............................................36 Windows Install Cleanup Installer .36 Windows Installer ....................11, 36 Windows Installer CleanUp ...........36 Windows Installer isn’t...................11 Windows NT..............................5, 11 Windows XP Home Edition Service
Pack.............................................1 Windows XP Professional Edition
Service Pack................................1 Winnt/System32 ............................36 Work
OK ...............................................1 Work................................................1 Workstation’s...........................18, 31 Workstations
Configuring ................................21 Workstations .................................21 Workstations .................................36 X XP ...................................................1 Y You’ve ...............................14, 18, 31