Download - Edu Cat en v5f Ff v5r18 Toc
-
8/14/2019 Edu Cat en v5f Ff v5r18 Toc
1/32
-
8/14/2019 Edu Cat en v5f Ff v5r18 Toc
2/32
Student Notes:
CATIA V5 Fundamentals
Copyright DASSAULT SYSTEMES 2
Co
pyrightDASSAULTSYSTEMES
Lesson 1: Introduction (2/3)
Opening an Existing Document 1-28
Understand the CATIA Interface 1-29
Windows Philosophy 1-30
Introduction to V5 Documents 1-34
The Workbench Concept 1-35CATIA User Interface 1-36
Workbenches 1-38
Menus and Toolbars 1-39
Finding Tools 1-41
The Specification Tree 1-42
Manipulating the Specification Tree 1-43Selecting Objects with the Mouse 1-44
The Object/Action and Action/Object Approaches 1-45
Using the CATIA Dialog Boxes 1-46
Using Dialog Boxes and Right-click 1-48
Moving Objects with the Mouse 1-49
Compass 1-51
Graphic Properties 1-52
-
8/14/2019 Edu Cat en v5f Ff v5r18 Toc
3/32
-
8/14/2019 Edu Cat en v5f Ff v5r18 Toc
4/32
Student Notes:
CATIA V5 Fundamentals
Copyright DASSAULT SYSTEMES 4
Co
pyrightDASSAULTSYSTEMES
Lesson 2: Profile Creation (1/3)
Case Study: Profile Creation 2-2Design Intent 2-3Stages in the Process 2-4Create a New Part 2-5
Creating a New Part 2-6Part Design Workbench 2-7
Select an Appropriate Sketch Support 2-8Reference Planes 2-9What is a Sketch? 2-10Sketch Support 2-11
Create Sketched Geometry 2-13
Basic Sketching 2-14Positioned Sketching 2-15Sketcher Workbench 2-16Grid 2-17
Geometry Creation 2-18
Points 2-19
Lines 2-20
Circles 2-21 Ellipse, Parabola, Hyperbola, and Spline 2-22
Conics 2-23
Pre-defined Profiles 2-24
User-defined Profiles 2-26
Introduction to Re-limitations 2-27
-
8/14/2019 Edu Cat en v5f Ff v5r18 Toc
5/32
Student Notes:
CATIA V5 Fundamentals
Copyright DASSAULT SYSTEMES 5
Co
pyrightDASSAULTSYSTEMES
Lesson 2: Profile Creation (2/3)
Construction Geometry 2-28Recommendations for Sketching 2-29
Why Positioned Sketch? 2-30
Creating a Profile: Which are the Best Tools to Use? 2-34
When to Use Fillet, Chamfer, Draft? 2-35
Exercise: Profile Creation (Detailed Instructions) 2-37Do it Yourself 2-38
Exercise: Profile Creation (Limited Instructions) 2-48Do it Yourself 2-49
Exercise: Multiple Profile Creation 2-51Do it Yourself 2-52
Constrain the Sketch 2-54Constraining the Sketch 2-55Geometric and Dimensional Constraints 2-56Fully-Constrained Sketches 2-57Geometric Constraints 2-58Dimensional Constraints 2-60Recommendations for Constraining 2-61
Sketch in Context 2-62
Sketcher Orientation 2-64 Tips on Initial Sketch Geometry 2-66
Tips on Constraint Creation 2-68
Controlling the Constraint Dimension Direction 2-69
-
8/14/2019 Edu Cat en v5f Ff v5r18 Toc
6/32
Student Notes:
CATIA V5 Fundamentals
Copyright DASSAULT SYSTEMES 6
Co
pyrightDASSAULTSYSTEMES
Lesson 2: Profile Creation (3/3)
Create the Pad Feature 2-70
Completing the Feature 2-71
Using a Pad to Create the First Feature 2-72
Save and Close the Document 2-73
Saving Documents 2-74Saving a Document with a New Name 2-76
Closing a Document 2-77
To Sum Up 2-78
Exercise: Sketch Constrains (Detailed Instructions) 2-79
Do it Yourself 2-80
Exercise: Sketch Constrains (Limited Instructions) 2-91
Do it Yourself 2-92
Exercise: Sketch Constrains 2-98
Do it Yourself 2-99
Case Study: Profile Creation 2-101
Do It Yourself: Drawing of the Support Plaque 2-102Case Study: Support Plaque Recap 2-103
-
8/14/2019 Edu Cat en v5f Ff v5r18 Toc
7/32
Student Notes:
CATIA V5 Fundamentals
Copyright DASSAULT SYSTEMES 7
Co
pyrightDASSAULTSYSTEMES
Lesson 3: Basic Features (1/3)
Basic Features in Part Design 3-2
Case Study: Basic Features 3-3
Design Intent 3-4
Stages in the Process 3-5
Determine a Suitable Base Feature 3-6Part Design Terminology 3-7
Creating a Base Feature 3-8
Selecting a Base Feature 3-9
Selecting a Base Feature - Exercise 3-10
Selecting a Base Feature - Answers 3-11
Features that Add or Remove Material 3-12
Create Pad and Pocket Features 3-14
Creating Pads 3-15
Creating a Simple Pocket 3-16
Pad and Pocket Limits 3-17
Restrictions for Pad/Pocket Profile Sketches 3-18Open Profiles 3-19
Create Holes 3-20
-
8/14/2019 Edu Cat en v5f Ff v5r18 Toc
8/32
Student Notes:
CATIA V5 Fundamentals
Copyright DASSAULT SYSTEMES 8
Co
pyrightDASSAULTSYSTEMES
Lesson 3: Basic Features (2/3)
What is a Hole? 3-21
Using Pockets or Holes 3-22
Hole Creation Using a Positioning Sketch 3-23
Hole Creation Using Pre-defined References 3-24
Create Fillets and Chamfers 3-26What is a Fillet? 3-27
Selection and Propagation Modes 3-28
Filleting an Edge 3-29
Face-Face Fillets 3-30
Variable Radius Fillets 3-32
What is a Chamfer? 3-34Chamfer Dimensioning Mode 3-35
Creating a Chamfer 3-36
Recommendations for Fillets 3-37
Why One Fillet for Few Edges? 3-38
To Sum Up 3-40
Exercise: Basic Features Creation (Detailed Instructions) 3-41
Do it Yourself 3-42
Exercise: Basic Feature Creation (Limited Instructions) 3-50
-
8/14/2019 Edu Cat en v5f Ff v5r18 Toc
9/32
Student Notes:
CATIA V5 Fundamentals
Copyright DASSAULT SYSTEMES 9
CopyrightDASSAULTSYSTEMES
Lesson 3: Basic Features (3/3)
Do it Yourself 3-51
Exercise: Basic Features Creation 3-56
Do it Yourself 3-57
Exercise: Edge and Face-Face Fillets 3-59
Do it Yourself 3-60Case Study: Basic Features 3-62
Do It Yourself: Drawing of the Engine Support 3-63
Case Study: Engine Support Recap 3-65
-
8/14/2019 Edu Cat en v5f Ff v5r18 Toc
10/32
Student Notes:
CATIA V5 Fundamentals
Copyright DASSAULT SYSTEMES 10
CopyrightDASSAULTSYSTEMES
Lesson 4: Additional Features (1/4)
Case Study: Additional Features 4-2Design Intent 4-3Stages in the Process 4-5Create Feature Profiles and Axis system 4-6
Additional Sketcher Tools 4-7
Sketcher Relimitation Tools 4-8 Sketcher Re-limitation Tools 4-8
Re-limitations 4-9
Trim Options 4-10
Quick Trim Options 4-11Sketcher Transformation Tools 4-12
Mirror and Symmetry Options 4-13
Translation 4-14 Rotation 4-16
Scale 4-18
Offset Propagation Modes 4-20
Offset 4-21Project 3D Elements 4-23
3D Geometry Elements 4-24
Isolate Projected Elements 4-25Sketch Analysis 4-26
Sketch Analysis Window 4-27
Performing a Quick Geometry Diagnosis 4-30
-
8/14/2019 Edu Cat en v5f Ff v5r18 Toc
11/32
Student Notes:
CATIA V5 Fundamentals
Copyright DASSAULT SYSTEMES 11
CopyrightDASSAULTSYSTEMES
Lesson 4: Additional Features (2/4)
Create Relationships between Dimensions 4-32
Create Relationships between Dimensions 4-32
Equivalent Dimensions 4-33
Creating Equivalent Dimensions 4-34
Editing Equivalent Dimensions through Feature Tree 4-35
Formula 4-36 Creating a Formula 4-37
Editing Formula through Feature Tree 4-38
Create an Axis System 4-39
Create an Axis System 4-39
Types of Axis System 4-40
Creating an Axis System 4-41
Axis System: Set as Current 4-42 Axis System with New Part 4-43
Create Multi-profile Sketch Features 4-44Multiple Profiles 4-45Multi-Pads/Pockets 4-46Solving Ambiguity for Multi-Pads/Pockets 4-48Sub-Elements of a Sketch 4-49
Solving Ambiguity for Sub-Elements 4-51Exercise: Multiple Profile Sketch Features (Detailed Instructions) 4-53
Do it Yourself 4-74
Exercise: Sketch Analysis and Pocket (Limited Instructions) 4-71Do it Yourself 4-72
-
8/14/2019 Edu Cat en v5f Ff v5r18 Toc
12/32
-
8/14/2019 Edu Cat en v5f Ff v5r18 Toc
13/32
Student Notes:
CATIA V5 Fundamentals
Copyright DASSAULT SYSTEMES 13
C
opyrightDASSAULTSYSTEMES
Lesson 4: Additional Features (4/4)
Exercise: Shaft and Groove 4-124Do it Yourself 4-125
Shell the Model 4-127Shelling 4-128
Shelling a Part 4-129
Recommendations for Shelling 4-131 Avoid Shell with Multiple Thickness 4-132
Importance of Feature Order 4-133Thin Features 4-134
To Sum Up 4-136Exercise: Thin Pad and Shell (Detailed Instructions) 4-137
Do it Yourself 4-138
Exercise: Pad, Fillet, Hole and Shell (Limited Instructions) 4-145Do it Yourself 4-146
Exercise: Thin Pad, Shell and Holes 4-151Do it Yourself 4-152
Case Study: Additional Part Features 4-154Do It Yourself: Drawing of the Handle Block 4-155
-
8/14/2019 Edu Cat en v5f Ff v5r18 Toc
14/32
Student Notes:
CATIA V5 Fundamentals
Copyright DASSAULT SYSTEMES 14
C
opyrightDASSAULTSYSTEMES
Lesson 5: Dress-up Features (1/3)
Case Study: Dress-up Features 5-2Design Intent 5-3Stages in the Process 5-4Apply a draft 5-5
What is a Draft? 5-6
Basic Drafts 5-8Reflect Draft 5-10Variable Draft 5-12Selecting Faces to Draft 5-14Using the Draft Analysis Tool 5-15Recommendations for Drafts 5-16
Parting and Neutral Elements 5-17
Create Fillets After Drafts 5-18 Dress-Up Feature Order 5-19
Create a stiffener 5-20Introduction to Stiffeners 5-21Creation of Stiffeners 5-22
Recommendations for Stiffeners 5-24
Avoid Creation of Stiffeners 5-25
Exercise: Stiffeners and Draft (Detailed Instructions) 5-26Do it Yourself 5-27
Exercise: Reflect Draft (Limited Instructions) 5-34
-
8/14/2019 Edu Cat en v5f Ff v5r18 Toc
15/32
Student Notes:
CATIA V5 Fundamentals
Copyright DASSAULT SYSTEMES 15
C
opyrightDASSAULTSYSTEMES
Lesson 5: Dress-up Features (2/3)
Do it Yourself 5-35
Exercise: Stiffeners and Draft 5-41
Do it Yourself 5-42
Create Threads and Taps 5-44
What are Threads and Taps? 5-45Thread and Tap 5-47
Exercise: Thread and Tap (Detailed Instructions) 5-49
Do it Yourself 5-50
Exercise: Thread 5-62
Do it Yourself 5-63
Edit Features 5-65
Editing Features 5-66
Model View Options 5-67
Hide/Show 5-68
Investigating the Model 5-70
Parent-Child Relationships 5-72
Why Reorder Features? 5-73
Reordering Features 5-74
-
8/14/2019 Edu Cat en v5f Ff v5r18 Toc
16/32
-
8/14/2019 Edu Cat en v5f Ff v5r18 Toc
17/32
Student Notes:
CATIA V5 Fundamentals
Copyright DASSAULT SYSTEMES 17
C
opyrightDASSAULTSYSTEMES
Lesson 6: Reusing Data (1/3)
Case Study: Reusing Data 6-2Design Intent 6-3Stages in the Process 6-4Duplicate Features 6-5
Introduction to Duplicating Features 6-6
Mirror 6-7Patterns 6-8
Reusing Data 6-1
Case Study: Reusing Data 6-2
Design Intent 6-3
Stages in the Process 6-4
Duplicate Features 6-5
Introduction to Duplicating Features 6-6 Mirror 6-7
Patterns 6-8
Rectangular Patterns 6-9
Circular Patterns 6-11
User Patterns 6-14
Recommendations for Patterns 6-16
Exploding a Pattern 6-17
-
8/14/2019 Edu Cat en v5f Ff v5r18 Toc
18/32
Student Notes:
CATIA V5 Fundamentals
Copyright DASSAULT SYSTEMES 18
C
opyrightDASSAULTSYSTEMES
Lesson 6: Reusing Data (2/3)
Removing Individual Instances in a Pattern 6-18
Keep Specification 6-19
Contextual Menus 6-20
Exercise: Patterns (Detailed Instructions) 6-21Do it Yourself 6-22
Exercise: Patterns (Limited Instructions) 6-33Do it Yourself 6-34
Exercise: Patterns 6-38Do it Yourself 6-39
Transform a Body 6-41Using Transformations 6-43Translation 6-44
Rotation 6-46Symmetry 6-47Scaling 6-49Recommendations for Transformations 6-50
Differences in Transformations 6-51
Scaling the Part to Define Mold Shrink 6-52
Copy-Paste 6-53
Copy and Paste Data 6-54
-
8/14/2019 Edu Cat en v5f Ff v5r18 Toc
19/32
Student Notes:
CATIA V5 Fundamentals
Copyright DASSAULT SYSTEMES 19
C
opyrightDASSAULTSYSTEMES
Lesson 6: Reusing Data (3/3)
Insert Data from a Catalog 6-57
Introduction to Catalogs 6-58
Power Copy 6-60
User Feature 6-63
Catalog Creation 6-64
Inserting Catalog Items 6-65
To Sum Up 6-68
Exercise: Part Transformation and Catalog (Detailed Instructions) 6-69
Do it Yourself 6-70
Exercise: Patterns Modifications (Limited Instructions) 6-80
Do it Yourself 6-81
Exercise: Pattern and Catalog 6-85
Case Study: Reusing Data 6-88
Do It Yourself: Drawing of the Engine 6-89
-
8/14/2019 Edu Cat en v5f Ff v5r18 Toc
20/32
Student Notes:
CATIA V5 Fundamentals
Copyright DASSAULT SYSTEMES 20
C
opyrightDASSAULTSYSTEMES
Lesson 7: Finalizing Design Intent (1/2)
Case Study: Finalizing Design Intent 7-2
Design Intent 7-3
Stages in the Process 7-5
Apply Material Properties 7-6
Material Properties 7-7Applying Material Properties 7-8
Viewing Material on the Model 7-10
Measure the Model 7-11
Measure Between Modes 7-15
Measure Between 7-16
Measure Item 7-18
Components Option 7-20
Mass Properties 7-22
Measure Inertia 7-23
Creating Measurement Geometry 7-25
Update 7-27
Exercise: Material and Measures (Detailed Instructions) 7-28
Do it Yourself 7-29
-
8/14/2019 Edu Cat en v5f Ff v5r18 Toc
21/32
Student Notes:
CATIA V5 Fundamentals
Copyright DASSAULT SYSTEMES 21
C
opyrightDASSAULTSYSTEMES
Lesson 7: Finalizing Design Intent (2/2)
Exercise: Material and Measures (Limited Instructions) 7-41Do it Yourself 7-42
Create Formulas and Parameters 7-45Formulas 7-46
Identifying Parameters 7-47
Creating User-Defined Parameters 7-48Renaming Parameters 7-50Filters 7-51Creating Formulas 7-52
Creating a Formula Using the Formula Dialog Box 7-53
Creating a Formula by Editing the Dimensional Value 7-55Recommendations for Formulas 7-57
Units 7-58
Displaying Formulas and User-Defined Parameters 7-60
To Sum Up 7-61Exercise: Parameter and Formula (Detailed Instructions) 7-62
Do it Yourself 7-63
Exercise: Parameter and Formula (Limited Instructions) 7-76Do it Yourself 7-77
Exercise: Parameter and Formula 7-85Do it Yourself 7-86
Case Study: Finalizing Design Intent 7-90Do It Yourself: Finalizing Design Intent 7-91
-
8/14/2019 Edu Cat en v5f Ff v5r18 Toc
22/32
Student Notes:
CATIA V5 Fundamentals
Copyright DASSAULT SYSTEMES 22
C
opyrightDASSAULTSYSTEMES
Lesson 8: Assembly Design (1/3)
Introduction to Assembly Design 8-2
Terminology 8-3
Case Study: Assembly Design 8-4
Design Intent 8-5
Stages in the Process 8-6Create a New CATProduct 8-7
Defining a New Assembly Document 8-8
Assigning Product Properties 8-9
Assemble the Base Component 8-10
Inserting an Existing Component 8-13
Assigning Component Properties 8-15
Manipulate the Position of the Component 8-17
Positioning the Compass to Move a Component 8-19
Moving a Component Using the Compass 8-20
Snapping Components 8-22
Fixing a Component in Space 8-23Fixing a Component 8-25
Can You Reorder a Product Structure? 8-27
-
8/14/2019 Edu Cat en v5f Ff v5r18 Toc
23/32
-
8/14/2019 Edu Cat en v5f Ff v5r18 Toc
24/32
Student Notes:
CATIA V5 Fundamentals
Copyright DASSAULT SYSTEMES 24
CopyrightDASSAULTSYSTEMES
Lesson 8: Assembly Design (3/3)
Fixing Together Components 8-63
Recommendation for Constraints 8-64
Constraint Rules 8-66
Assembly Assistant 8-67
Updating Constraints 8-68
Options For Updating Assembly Constraints 8-70
Handling Update Errors 8-71
Save the Assembly 8-72
Saving an Assembly Document 8-73
Saving a Document With Another Name 8-74
Saving All Modified Documents 8-75Save Management 8-76
To Sum Up 8-77
Exercise: Constrain Components (Detailed Instructions) 8-78
Do it Yourself 8-79
Exercise: Constraints Creation (Limited Instructions) 8-87
Do it Yourself 8-88
Exercise: Degrees of Freedom 8-93
Do it Yourself 8-94
Case Study: Assembly Design 8-96
Do It Yourself: Drawing of the Handle Mechanism 8-97
-
8/14/2019 Edu Cat en v5f Ff v5r18 Toc
25/32
Student Notes:
CATIA V5 Fundamentals
Copyright DASSAULT SYSTEMES 25
CopyrightDASSAULTSYSTEMES
Lesson 9: Designing in Context (1/3)
Working in the Context of an Assembly 9-2
Case Study: Designing in Context 9-3
Design Intent 9-4
Stages in the Process 9-5
Open an Existing Assembly 9-6Opening an Existing Assembly 9-7
Desk Option 9-8
Design and Visualization Mode 9-10
Visualization Mode 9-11
Working in Visualization Mode 9-13
Exercise: Visualization and Design Modes (Detailed Instructions) 9-15
Do it Yourself 9-16
Exercise: Visualization and Design Modes (Limited Instructions) 9-24
Do it Yourself 9-25
Insert a New Model 9-28
Inserting a New Model 9-29Inserting a New Part 9-30
Inserting a New Product 9-32
-
8/14/2019 Edu Cat en v5f Ff v5r18 Toc
26/32
Student Notes:
CATIA V5 Fundamentals
Copyright DASSAULT SYSTEMES 26
CopyrightDASSAULTSYSTEMES
Lesson 9: Designing in Context (2/3)
Inserting a New Component 9-33
Component Properties Revisited 9-34
Create a Sketch in Context 9-35
Editing a Part 9-36
Sketching On a Face Of a Component 9-37
Projecting 3D Elements Onto the Sketch Plane 9-38
Intersecting 3D Elements with the Sketch Plane 9-39
Defining Sketch Constraints Using Other Components 9-40
Limiting Features Up to Other Components 9-41
References and Options 9-42
Isolating Features 9-44Create Assembly-Level Features 9-45
Assembly-Level Features 9-46
Assembly-Level Features 9-48
What are Assembly Features? 9-50
What are Affected Parts? 9-53
Specifying Affected Parts 9-54Creating an Assembly Split 9-55
-
8/14/2019 Edu Cat en v5f Ff v5r18 Toc
27/32
Student Notes:
CATIA V5 Fundamentals
Copyright DASSAULT SYSTEMES 27
CopyrightDASSAULTSYSTEMES
Lesson 9: Designing in Context (3/3)
Creating an Assembly Hole 9-56
Using Hole Series 9-57
Creating an Assembly Pocket 9-58
Adding a Body to an Assembly 9-59
Removing a Body from an Assembly 9-60
Cautions About Designing in Context 9-61
To Sum Up 9-62
Exercise: Design in Context (Detailed Instructions) 9-63
Do it Yourself 9-64
Exercise: Design in Context (Limited Instructions) 9-72
Do it Yourself 9-73Exercise: Design in Context 9-79
Do it Yourself 9-80
Case Study: Designing in Context 9-83
Do It Yourself: Designing in Context 9-84
C
-
8/14/2019 Edu Cat en v5f Ff v5r18 Toc
28/32
Student Notes:
CATIA V5 Fundamentals
Copyright DASSAULT SYSTEMES 28
CopyrightDASSAULTSYSTEMES
Lesson 10: Drafting (1/4)
Case Study: Drafting 10-2
Design Intent 10-3
Stages in the Process 10-4
Introduction to Generative Drafting 10-5
General Process 10-6Accessing the Workbench 10-7
The Drawing Environment 10-8
Start a New Drawing 10-10
Setting the Drawing Sheet Format and Drafting Standards 10-11
Starting a Drawing with a Blank Sheet 10-12
Sheet Properties 10-13
File > New from 10-14
Drawing Title Blocks 10-15
Introduction to 2D Catalogs 10-17
Inserting Catalog Items 10-18
Create Views 10-20
Types of Views 10-21
What is a Front View ? 10-22
CATIA V5 F d t l
-
8/14/2019 Edu Cat en v5f Ff v5r18 Toc
29/32
Student Notes:
CATIA V5 Fundamentals
Copyright DASSAULT SYSTEMES 29
CopyrightDASSAULTSYSTEMES
Lesson 10: Drafting (2/4)
Creating a Front View 10-23
Using the Compass 10-25
About the Projection Plane 10-28
Adding Projection Views 10-29
Adding an Isometric View 10-30
View Wizard 10-31
Generating views using the View Wizard 10-32
Different Modes of View Generation 10-35
CGR Views 10-36
Which Elements Will Be Projected? 10-37
Create Dimensions and Annotations 10-38Dimensions 10-39
Dimensions System 10-40
Types of Dimension Locators 10-41
Creating Dimensions 10-43
Dimensioning a Length 10-45
Dimensioning a Distance 10-46Dimensioning a Hole 10-47
Dimensioning a True Length 10-48
Dimensioning a Simple Angle 10-49
Dimensioning a Simple Radius 10-50
CATIA V5 Fundamentals
-
8/14/2019 Edu Cat en v5f Ff v5r18 Toc
30/32
Student Notes:
CATIA V5 Fundamentals
Copyright DASSAULT SYSTEMES 30
CopyrightDASSAULTSYSTEMES
Lesson 10: Drafting (3/4)
Dimensioning a Diameter 10-51Dimensioning a Chamfer 10-52Dimensioning a Thread 10-53Chain Dimensions 10-54Stacked Dimensions 10-55Cumulated Dimensions 10-56Annotations 10-58
Create Additional Views 10-59Section Views and Section Cut 10-60Adding a Simple Section View on a Drawing 10-61Creating a Section View Using a 3D Profile Definition 10-62Adding a Detail View 10-63Creating a Clipping View 10-64Creating a Broken View 10-65Creating a Breakout View 10-66Adding an Auxiliary View 10-67
View Modifications 10-68Repositioning Views 10-69Deleting Views 10-74
View Properties 10-75Modifying the Links of a View 10-76Replacing the Projection Plane of a View 10-78Invert Section View Profile 10-80Replace Section View Profile 10-81
CATIA V5 Fundamentals
-
8/14/2019 Edu Cat en v5f Ff v5r18 Toc
31/32
Student Notes:
CATIA V5 Fundamentals
Copyright DASSAULT SYSTEMES 31
CopyrightDASSAULTSYSTEMES
Lesson 10: Drafting (4/4)
Save the Drawing 10-82
Matching the Drawing with the Modified 3D Part 10-83
Checking Links to 3D Parts 10-84
Saving a Drawing 10-86
Print the Drawing 10-87
Printing a Drawing 10-88
Print User Interface 10-89
To Sum Up 10-91
Exercise: Drawing Creation (Detailed Instructions) 10-92
Do it Yourself 10-93
Exercise: Drawing Creation (Limited Instructions) 10-105Do it Yourself 10-106
Exercise: Drawing Creation 10-110
Do it Yourself 10-111
Case Study: Drafting 10-113
Do It Yourself: Drawing of the Base Part 10-114
CATIA V5 Fundamentals
-
8/14/2019 Edu Cat en v5f Ff v5r18 Toc
32/32
Student Notes:
CATIA V5 Fundamentals
Copyright DASSAULT SYSTEMES 32
CopyrightDASSAULTSYSTEMES
Master Project
Master Project: Overview A-2
Master Project: Overview Recap A-5
Master Project: Part Creation A-6
Master Project: Part Creation Recap A-17
Master Project: Finalize the Part A-18Master Project: Finalize the Part A-19
Master Project: Finalize the Part Recap A-23
Master Project: Create an Assembly A-24
Master Project: Create an Assembly A-25
Master Project: Create an Assembly Recap A-32
Master Project: Edit a Part in an Assembly A-33Master Project: Edit a Part in an Assembly A-34
Master Project: Edit a Part in an Assembly Recap A-36
Master Project: Create an Assembly Drawing A-37
Master Project: Create an Assembly Drawing A-38
Master Project: Create an Assembly Drawing Recap A-39