Turbo Oil-Free Compressor
New Generation Efficient Chiller
The Next Generation Chillers
Turbo Oil-Less Compressors
Chilled Water Heat Exchanger
Condensing Water Heat Exchanger
Shell & Tube Exchanger
Piping
HMI-Human Machine Interface Controller
CondenserWater Side
ChilledWater Side
Chilled Water Pumps
Cooling Tower Water Pumps
Over View Chillers Plant
New Levels of Performance
with Magnetic Oil Less Bearings
Turbo Oil-Less Compressor
The concept of magnetic bearings has been around for at least 100 years. For many of those years,
though, it was the stuff of university experiments and studies. However, as computing power has improved
so has the viability of using magnetic bearings in commercial applications
The progression in magnetic bearing technology has followed the evolution of computer technology. The improvement in electronics and
software has enabled better monitoring and control of motion. And magnetic bearing technology has been both the beneficiary of this
technology improvement as well as the cause of certain applications becoming more likely to benefit from magnetic bearings. Especially for industrial machinery, increasingly environmental impact and the cost of energy are becoming the top priorities. In these applications, magnetic bearings can provide higher speed operation with greater reliability and
efficiency.
Perhaps the greatest benefit of magnetic bearings is their ability to rotate at extremely high speeds. The bearings themselves are limited by the strength of the material to a peripheral speed limit of 180 m/s. For special applications, it is possible to increase this limit to 200 m/s with more exotic materials. Another factor is the nearly frictionless performance of the bearings which is the direct result of the rotor floating on a contact-free magnetic field. The elimination of moving mechanical components also means that there is no lubrication required for the bearing system, which makes it a very clean system to operate. All of these factors make magnetic bearings highly reliable, which drastically reduces maintenance requirements. Magnetic bearing systems also have low vibration levels even during high-speed operation, and low audible noise levels.
Main Advantages الفائــــدة األهـــــــم
Other Advantages
فوائــــد أخـــــــري
Turbo Oil-Free Other Compressors
Turbo Oil-Free
Chillers are coming in sizesFrom: 265 - 1055 KWc
KWc 100% 75% 50% 25% SEER L W H KG R-134
Integrated Plant Package
Cooling Tower
Pumps
Control
Chillers
Cooling Tower
Power Electrical
Client Point Connection
Turbo Oil LessCompressors
Pressurization Pump & Tank
Complete Internal Piping
SandFilter
GRP Collection Tank
PumpsChemical Dosing
Connection Point
Stable Frame Design Reinforced for Cooling Towers
“ تبريد ” منظومة عن تستقل أن تريد عندماالمناطق.
When you want to go independent from “Tabreed” District Cooling.الطرد شيلرات منظومة إستبدال تريد عندما
.المركزىWhen decided the replace existing old Centrifugal Chiller
لتعزيز و الطارئة الظروف عند.المظومة
When urgent need for back-up or during Emergency
. القائمة الشيرات من الحالية الكهرباء فواتير تقليل تريد عندماWhen decided to reduce electricity bills & save energy
تبريد عندما بمنظومة مرتبط مجمع ضمن واحد مبنى ينجزWhen one building constructed among DC-Complex
لتركيب متاح كاف حيز هناك يكون ال عندماالشيرات
When there is no enough SPACE for Chillers Plant
Air CooledChiller
MoreAdvantages
Retrofitting at Existing Sites
مرونة اإلستبدال
المشاريع فىالقائمة
To Replace OldCentrifugal or Screw Compressors
First Step:
First Step:Remove Old Centrifugal or Screw
Compressor
FixingProcedure
PipingWork
FixingProcedure
Compressor Details
Compressors Base
Insulation
Add New Controller
Final Fixing
بنا تتصل ? How to Call usكيف
To benefit from our Services:
• Consultancies.• Corrections.Call: Eng. Juma Yousef
لإلستفـــــــــــاد: خدمــــاتنا من ة
اإلستشارية.•التص?حيحية.•
اتصل: يوسف/ جمعة المهندس