EHEDG TRIPLE 0,8 Tubes and fittings
Key supplier to the food and pharma industries for more than 140 years
EN
M a s t e r i n g P u r i t y
<0,8 <0,8 <0,8
FOOD-SAFE PRODUCTION
• EHEDGcertifiedtubesandTRIPLE0.8fittings(Ra<0,8µm)
• TubesandfittingscleanableaccordingtoEHEDGspecifications
• EN10357SeriesA-EN10357(DIN11850PracticeBasedSizes)
• ConformitystatementCE1935/2004
• Internalandexternalroughnessmentionedonthematerialtestreport(MTR)
• EN10204-3.1
• Tubesandfittingsdirectlyavailablefrom
stock
Technical specs• Internalroughness:<0,8µm• Externalroughness:<0,8µm• Roughnessontheweldarea:<0,8µm• Annealedtubesandfittingsannealedafter
forming• Onlyavailableinquality316L• Orbitalwelding:fittingswithstraight
endsdirectlyavailablefromstock
INOXCO EHEDG TRIPLE 0.8 - a complete product range without compromisesVerystricthygienicrulesimpedethatfoodorpharmaceuticalproductsbecomeunhealthyorunsafeduringtheproductionprocess.Excellentcleanabilityofstainlesssteelcomponentsiskey.Thereforeasmoothsurfaceofthestainlesssteelcomponentsthatareusedintheproductionlineisrequired.TheINOXCOEHEDGTRIPLE0.8rangeguaranteesaninternalandexternalroughnessandroughnessontheweldareaofRa<0.8µm.
TheINOXCOEHEDGTRIPLE0,8productrangeincludes:• Tubes • Fittings(weld)• Butterflyvalves
• Reducers• Ferrules• Couplings
• Bends• Tees• Hollowcaps
Advantages• Complete product range tubes (EHEDG certified) and fittings• For a safe and hygienic production accordingtothefood-safetyregulations• Significant lower cost of ownershipasaresultofreduced costs for maintenance, less energy
consumption (shorter cleaning cycles) and less consumption of detergents• Extreme traceability:bothmarkingonthecomponentasonthecertificate• Improved cleanability thankstotheextremesurfacesmoothness• Hygienic packaging and stockage• Reduced risk of contamination and corrosion• Directly available from stock
< 0,8
< 0,8< 0,8
Roughness on the weld Ra < 0,8 µm Weld factor V=1 The weld is as strong as the rest of the surface and equals the strength of a seamless tube.
Internal roughness Ra < 0,8 µm Reduces contamination risk and improves cleanability.
External roughness Ra < 0,8 µm
Reduces the contamination risk from outside by prevent-ing dirt from getting a grip on the surface (for example when opening the tube).
<0,8 <0,8 <0,8
Surface treatment
Unfurl Shaping
Welding
Eddy Currentinspection
Rolling
Polishing
Heat treatment
Eddy Currentinspection Dimensioning BD inspection Cutting Polishing Working the ends Ultrasone cleaning Drying Packaging
Bending Shaping Passivation
Ultrahygienic production process
Thestate-of-the-artproductionprocessofINOXCOEHEDGTRIPLE0,8tubesandfittingsguaranteesanoutstandingqualitylevel.
FOOD-SAFE PRODUCTION
Only available in 316L
INOXCO EHEDG TRIPLE 0,8 tubes and TRIPLE 0,8 fittingsareonlyavailableinstainlesssteel316L.Thisausteniticchromium-nickelstainlesssteelqualityofffersasuperiorcorrosionandheatresistancecom-paredtootherqualities.
Other EHEDG products available:
• EHEDGbutterflyvalve:weld/weld,weld/thread,thread/threadavailablebothin304Land316L;standardEPDMseal(siliconeandvitonalsoavailable);2way-positioninghandle,optionallyextendablewithactuatorandindicationunit
• EHEDGsprayballs• EHEDGconformity:membranepump,lobepumps,centrifugalpump
5100116532/100
Messer: Gillain & Co nv/saLoad No. 5100116532Customer Order No. A1401045-2Customer Part No. BR369004HDGKL Part No. A1480001GG0000534W Part Description. EN10357 BD WLD TUBING 53X1.5 316LMaterial. 316LQuantity. 336.00 M Date of Certificate. 2014.06.23 Cert. No./Job No. 0000348810
Raw Material Specification (weight%) Heat Number C Si Mn P S Ni Cr N Mo Material Standard
S641598 0530 0.020 0.500 1.380 0.033 0.001 10.080 16.580 0.012 2.100 EN10357:2013/EN10217-7 1.4404
Mechanical Test
Heat Number Yield Rp 0.2 Yield Rp 1.0 Tensile Strength Hardness
Reduction
of Area
Elongation
( l ) Impact Test
MPa
(N/mm2)KSI
MPa
(N/mm2)KSI
MPa
(N/mm2)KSI HB/HRB/HV % % 20℃-J
S641598 0530 365.000 52.925 N/A N/A 640.000 92.800 126.600H B N/A 51.000 N/A
Mechanical Test Continuation Heat Number Eddy Current Test Flaring
Test
Flattening
Test
Bend Test Intergranular
Corrosion Test
S641598 0530 OK OK OK OK OK
Other Analysis And Inspection Visual &
Dimensional Test
Material
Identification Test
Ra Max Value
(ID/OD)
OK OK 0.42/0.70 Certificates of Compliance: KINGLAI is authorized by the ASME for the fittings and tubing in according with ASME BPE 2012, certificate number is BPE-104 We certify that this information is a true representation of the data that has been furnished by our raw material. We have no knowledge of any mercury of low melting contamination. Examined according to quality system BS EN ISO 9001:2008 by BSI. Certification number:FM 85641.All products have heat treatment process except some specified products per customer order, the temperature is 1040~1100℃, and air cooling This certificate was made by use of a computer system and is valid without signature. The materials listed herein have been tested for radioactivity and the tests confirm that the values are within the limits of the backgroundradiation.
Traceability
• Permanentmarking:heatnumber,dimensions,surfacefinish,material,executionnumber• Markingbothontubesandfittingsaswellasonmaterialtestreports(MTRs)
INOXCO EHEDG TRIPLE 0,8 - a complete product range without compromises
Internal/external roughness In this example the maximal internal Ra is 0.42/0.70 µm
316L The EN10204-3.1 MTR mentions the stain-less steel quality.
Heat number The MTR clearly mentions the heat num-ber.
Standard
Excecution number The execution number is permanently marked on the component.
ClearmarkingsontheinoxcoEHEDGTRIPLE0.8componentsandMTR(MaterialTestReport)ensurethattheINOXCOEHEDGTRIPLE0.8partsareeasilytraceable.
<0,8 <0,8 <0,8
Price quote or more info?
+32 3 870 60 80
+32 3 870 60 89
www.gillain.com
Packaging and storage
Food-safecomponentsmustnot only be manufactured according to the most stringent criteria,theyalsohavetobehandled, packed and stored in optimal circumstances.Gillain&Cosetsthehigheststandardsforstorageandmanipulationofstainlesssteeltubingandpartsbystoringinadryanddust-freewarehouse.INOXCOEHEDGTRIPLE0,8tubesareseparately packed in plastic film.Tubeandcomponentends are covered with plastic end-caps.Thispreventscorrosionandtheinfiltrationofimpurities,insectsandbugsintheunprotectedopeningsofthepartsduringtransport.
M a s t e r i n g P u r i t y
OUTSIDEDIAMETER
(MM)
WALLTHICKNESS
(MM)
NOMINALOUTSIDEDIAMETER
NOMINALWALLTHICKNESS
13,00 1,50 DN10 Range2
19,00 1,50 DN15 Range2
23,00 1,50 DN20 Range2
29,00 1,50 DN25 Range2
35,00 1,50 DN32 Range2
41,00 1,50 DN40 Range2
53,00 1,50 DN50 Range2
70,00 2,00 DN65 Range2
85,00 2,00 DN80 Range2
104,00 2,00 DN100 Range2
EN10357SeriesA(DIN11850Range2)-316Lannealedandout-sidepolished
Price quote or more info?
+32 3 870 60 80
+32 3 870 60 89
www.gillain.com
INOXCO EHEDG TRIPLE 0,8
<0,8 <0,8 <0,8
© G
illa
in &
Co
EH
ED
G_
20
15
09
21
OUTSIDEDIAMETER
(MM)
WALLTHICKNESS
(MM)
NOMINALOUTSIDEDIAMETER
NOMINALWALLTHICKNESS
28,00 1,50 DN25
34,00 1,50 DN32
40,00 1,50 DN40
52,00 1,50 DN50
EN10357(DIN11850PracticeBasedSizes)-316Lannealedandoutsidepolished(BD)
Stay tunedReceive our bi-monthly newsletter directly in your mailbox. Register via www.gillain.com
REF2
0171
128