INTERNATIONAL E-Z UP, INC.1650 Iowa Avenue Suite 200, Riverside, California 92507 USA

Voice (909) 426-0060 • Fax (909) 426-0063 www.ezupdirect.com800-SHADE ME8 0 0 - 7 4 2 - 3 3 6 3

DURA LON SIDEWALL INSTRUCTIONSE-Z UP® Instant Shelters®

Covered under one or more of the following patents: 4,607,656; 4,924,896; 5,244,001; 5,421,356; 5,485,863; 5,490,533; 5,511,572; 5,632,292; 5,632,293; 5,794,546; 5,797,412; 5,813,425; 5,865,127; 5,921,260; 5,934,301; 6,041,800; 6,070,604; 6,076,312; 6,129,102; 6,138,702; 6,192,910; 6,230,729; 6,240,940;6,361,057; 6,363,956; 6,374,842; 6,382,224; 6,397,872; 6,412,507; 6,431,193; 6,439,251; 6,470,902; 6,502,597; 6,520,196; 6,601,599; 95704390; 94/2354; 91461; 132167; 95/0693; 95/6140; 95/6141; 84107895; 684,978; 2123096; 190486; 289754; 215344; 701077; 2128935; 2949648; 48648; DE 695 10 919 T2;WO96/03561. International Design Registration No. DM/009515 Benelux Design Registration No. 16959-04. Other US and foreign patents pending. © Copyright 2006 International E-Z UP, Inc. USA. All rights reserved.

2 (Side) Sidewalls 1 (Rear) Sidewall (Backdoor) 1 (Front) Sidewall

Step 1: ATTACHING (SIDE) SIDEWALLSLocate the 2 (side) sidewalls andplace them on opposing sides of theshelter; these walls will serve as thesides of the unit. Attach each side-wall to the frame by wrapping thetoggle and loop straps (use shortloop first) around the frame trussesand the side hook & loop strapsaround the legs of the frame. Securethe straps by pressing them onto theopposite end of the hook & loopstrip.

Note: The top of the sidewalltucks in between the shelter’s frameand the valance of the shelter’s top.

Step 2: ATTACHING (BACK DOOR) MIDDLE-ZIPPER SIDEWALLLocate the sidewall with the middle-zipper which can be used as a backdoor. To attach, make sure that thetwo halves of the sidewall arezipped together; then, follow theinstructions under Step 1 above.

Step 3: ATTACHING (FRONT) SIDEWALLIf the awning is attached simplyremove awning material first. (Seethe Awning Instructions sheet, overthe page.)

Locate the sidewall with cut-outs at thetop corners. Lift the hook & loop flapover the cut-outs and slide the cutouts

over the awning bracket arms. Attachthe sidewall to the frame by wrappingthe top toggle & loop straps aroundthe frame trusses and the side hook &loop straps around the legs of theframe. Secure the straps by pressingthem onto the opposite end of thehook & loop strip.

Reattach Awning Material when com-plete.

Step 4: ENCLOSING THE SHELTERTo fully or partially enclose theE-Z UP® shelter, zip the sidewallstogether at each corner of the frame.

Step 5: SIDEWALL ROLL-UP FEATURETo use the roll-up feature, unzip thesidewall at each corner. Have twopeople stand on each end of thesidewall and roll the sidewall up.Once the sidewall has been rolled tothe top, secure it by using the longtoggle & loop strap. Wrap the straparound the sidewall, over the frametruss, and then hook onto the toggleend.

Step 6: RELEASING THE ROLLED-UP SIDEWALLSTo drop down the rolled-up sidewalls,release the toggle & loop straps andlet the sidewall unroll and drop to theground.

Note: The longtoggle loop strapsare for the side-wall roll-up fea-ture.

The short toggleloop straps arefor attaching thesidewall to theframe trusses.

Note: When enclosingyour shelter and zippingup all 4 sidewalls, it isstrongly recommendedthat you take down theawning and remove thename banner to avoidwind damage.

TM

Sidewall Components Meet CPAI-84 Fire Requirements

NAME BANNER & AWNINGINSTRUCTIONS

E-Z UP® Instant Shelters®

WARNING: Keep all flame and heat sources away from the top, awning and sidewall fabrics. These fabrics meet the flammability require-ments of CPAI-84. The fabric may burn if left in continuous contact with any flame source. The application of any foreign substance to thetent may render the flame-resistant properties ineffective.

How to Set Up your E-ZUP® Name Banner andAwning Accessories

What’s provided:1 x Dura-Lon™ Awning Material1 x Dura-Lon™ Name Banner 2 x Awning poles

ATTACHING NAME BANNER

Step 1: The Name Banner is attached to yourInstant Shelter Top. Locate the fourfabric loops that are sewn into thecorners of the Shelter top. Thenlocate the four plastic hooks into thefabric loops. Be sure to orient thename banner so that the vinyl pocketis facing outwards.

Step 2:The vinyl pocket should be facingoutwards on your name banner.*Simply slide your own signage intovinyl pocket.

*Signage is not included.

PROPACCESS R01 OVO22

ATTACHING AWNINGPOLES

Step 1: Locate the awning banner holes inyour E-Z UP® frame. (Shown oppo-site). You may have one of twotypes of frame but both require theawning pole to be pushed into theframe leg or slider.

ATTACH AWNING FABRICStep 1: Slide awning fabric over the exten-sion arms. Slide the fabric to theend of arm.

Caution:When taking down your E-Z UPShelter be sure to remove theAwning and Name Banner beforeclosing the shelter.

We recommend that all accessoriesbe removed should heavy winds orrain threaten.