Extrusion PumpsFor High Viscosity Fluids
43688.qxd 2/8/06 9:32 AM Page 2
43688.qxd 2/8/06 9:32 AM Page 3
MODEL PAGE MODEL PAGE MODEL PAGE MODEL PAGE
100085 27104104-XXX 27104174-X 27104253-2 272085 2523644-400 2928353 26407441-XX 24407442-XX 23, 24407443-XX 24407444-XX 24613112-XXF-C 36613123-XXF-C 40613124-XXF-C 4462274 26622201-XXX 31622204-XXX 31622581-6 31622651-XXX 31622681-6 31628014-XXX 31628042-XXX 31628055-XXX 31628081-XXX 31628084-XXX 31628088-7 12628089-X 12635040 29635043 29635106 25635108 25635117 25636075 25636077 25636080 25636085 25636086-B 25636087-B 25636088 25637348-XXX 58,62,65640169 12641523-1 22650006 21
650007 21650008 21650009 21650239 5650239-1 5650240 5650408-B 33650408-B-X-B 33650409 34650409-X 34650453-X 35650483-X4X 38650484-X4X 41650485-X4X 45650491-X43-B 51650492-4X3-B 56650540-1 8650541-1 8650542-1 8650543-1 9650683-X4X 42650684-X4X 47650685-X4X 49650691-X43-B 57650692-X43-B 64650863-X4D-B 48650866-X6D-B 37650867-X6D-B 39650871-XXE-C 52650875-XXE-C 53650883-X4X-B 46650888-XXX 58650889-XXX 62650891-X4D-C 63650934-XX3-C 68650935-X43-C 71650939-X4D-B 69650940-X6D-B 66650941-XXE-C 67650944-XXX-B 70650963-X4D-B 50650967-X6D-B 43650971-XXE-C 59
650989-XXX 6565138 1265139 12,58,62,65651412 25651412-X 25651418-XXX-B 25651420-XX 25651420-XXX 25651421-XXX 25651422-XXX 25651500 22651511 22651513-11-B 22651533 25651536-1 22651537-1 22651612-X 15,58,62,65651613-B 12651614-X 15651615-C 12651616-XX 13651729 26651780-XXX-B 19651781-XXX-B 19651790-XXX-B 20651791-XXX-B 20651840-X 16651841-1 16651842-1 1665778 1265940 2666248 1766248-1 1766333-B 2966334-B 2966353-1 1466354-1 1466469 1666516 1766516-X 1766517 1766517-X 1766541-X 25
66713 1266718 29,62,6566731 1666731-X 1666732 1666732-X 1667073 1267075-XX 1267120-P4X 6067121-P4X 6167133 1467134 1867136 16,1867195-X 1867196-X 1867300-XXX 58,62,6576751 2591363-10 1891364-10 1691790 2992460 29,58C28121-800 26C28241-810 26CAT66P-XXX-X 27CHW 28CHW-XXX 28CSN 28CSN-XXX 28H25XXX-XXX-X 27MQ372X-XXX-X 27NM2322E-X1-P4X 54NM2322F-X1-P4X 55NP322L01-1 6NP322L02-1 6NP322R01-1 7NP322R02-1 7NP443R01-1 9P29122-600 26P29241-610 26TBOXXX-XXX-X 27
Numeric Index | 1
Extrusion Data: 2Typical Application: 3Viscosity Selection Data: 4
Extrusion Packages: 5 - 11Extrusion Accessories: 12 - 31Steps To Order The Right Pump 32Individual Pump Models 33 - 71
PAGE PAGE
Numeric Index
Table of Contents
43688.qxd 2/8/06 9:32 AM Page 4
Extrusion pumps are frequently put in the most difficult of applications: moving high viscosityfluids. Extrusion pumps are used to apply a bead of material. In some instances the pump suppliesa continuous bead; other applications call for intermittent delivery. Typical high-viscosity fluidspumped include caulkings, heavy lubricants, mastics, sealers and inks.
Viscosity is the largest obstacle in an extrusion application. As viscosities increase, fluid flowdecreases. In general, 2-ball pumps can be used for fluids with viscosities up to 50,000 cPs. Chop-check pumps are for higher viscosity fluids. Pump ratios in extrusion applications range from 9:1 to65:1.
Additional equipment is needed to keep an extrusion pump primed. Follower plates, lifts and ramsassist the flow of material into the pump inlet. Without this equipment, the fluid will not “flow” intothe pump. Lifts can be used for fluids with viscosities up to 200,000 cPs. Rams are needed forfluids with higher viscosities. If a fluid is stringy, a Ram may be needed for fluids with viscosities aslow as 60,000 cPs.
Extrusion pumps also use fluid mass to keep the pump primed. When bulk tanks are used, theweight of the fluid will push it into the pump inlet.
Several accessories will improve the efficiency of an Extrusion application. They include:Follower Plates: Plates mount directly to pump inlet. Fluid is assisted into pump. Available for 5-gallon (19-liter) pails and 55-gallon (208-liter) drums.Follower Seals: Forms seal between Follower Plate and Container to maintain prime. Available inSingle or Double Lip Models. Use Single-Lip Wiper for viscosities up to 300,000 cP. Double LipWiper provides better wiping action on higher viscosity fluids. Use Double-Lip Wipers for fluidsviscosities over 300,000 cP.Lifts: Eases change over of empty containers. An internal cylinder lifts the pump from thecontainer. Weight of air motor, pump and mounting bracket maintain pump prime. Used onmedium to high viscosity fluids. Available for 5 and 55-gallon containers.Rams: Function like a lift, but also exert downward force. Ram air cylinders push pump andfollower plate into the fluid. Available in single or two-post configurations, for 5 or 55-galloncontainers. Used on medium to high viscosity fluids.Portability Kits: For single-post ram mounted pumps. Wheels bolt onto base of ram. Easesportability of unit around application site.Floor Mounts: Used when fluid is stored in large, bulk containers. Gravity feeds material into thepump inlet. Locate as close to fluid container as possible.Downstream Fluid Regulators: Used to control fluid pressure at the dispense point. Downstreamregulators cut fluid pressure to desired level. Also used to eliminate pulsation to provide evenconsistent flow of material.Extrusion Guns: Used to dispense fluids with viscosities above 200,000 cPs. Available in manualor automatic configurations. “Snuff-back” guns eliminate drool at work site.Extrusion Nozzle Kit: For manual or automatic extrusion guns. Size of orifice diameter controlssize of bead extruded from the gun.
Accessories Required
Application Parameters
Extrusion Pumps
2 | Extrusion Information
43688.qxd 2/8/06 9:32 AM Page 5
I.D. DESCRIPTION: See Page Number
1
2
3
4
7
6
5
10
9
8
1
2
3
4
76
5
10
9
8
Typical Extrusion Applications
Typical Extrusion Accessories
Extrusion Information | 3
F-R-L Kit Assembly 26ARO-STOP® Over-run Control 29Two Post Ram 10-15Downstream Fluid Regulator 19Automatic Extrusion Gun 22Extrusion Gun Nozzle Kit 22Single Post Ram 12Swivel 25Manual Extrusion Gun 22Extrusion Nozzle Kit 22
43688.qxd 2/8/06 9:32 AM Page 6
Pump Lift/Ram Max See Viscosity Range CPSModel Bare Flow GPM Page Material Ratio 100 3,000 4,000 10,000 20,000 25,000
Pump Lift/Ram Max See Viscosity Range CPSModel Bare Flow GPM Page Material Ratio 100 55,000 65,000 100,000 200,000 1 Mil.
650485 Bare 1.3 Stn. Stl. 30:1NP421R Ram 1.3 Stn. Stl. 30:1650685 Bare 1.3 Stn. Stl. 60:1NP621R Ram 1.3 Stn. Stl. 60:1650484 Bare 1.9 Stn. Stl. 22:1NP422R Ram 1.9 Stn. Stl. 22:1650684 Bare 1.9 Stn. Stl. 45:1NP622R Ram 1.9 Stn. Stl. 45:1650963 Bare 2.0 Carbon Stl. 65:1650408 Bare 2.8 Stn. Stl. 9:1650409 Bare 2.8 Stn. Stl. 9:1650453 Bare 2.8 Carbon Stl. 9:1650483 Bare 3.7 Stn. Stl. 11:1NP424R Ram 3.7 Stn. Stl. 11:1650683 Bare 3.7 Stn. Stl. 23:1NP624R Ram 3.7 Stn. Stl. 23:1650883 Bare 3.7 Stn. Stl. 40:1650863 Bare 5.4 Carbon Stl. 45:1613112 Bare 15.0 Stn. Stl. 10:1650866 Bare 15.0 400 Stn. 10:1650867 Bare 15.0 400 Stn. 15:1613123 Bare 15.0 Stn. Stl. 15:1650967 Bare 15.0 400 Stn. 23:1613124 Bare 15.0 Stn. Stl. 23:1
650492 Bare 1.8 Carbon Stl. 23:1650692 Bare 1.8 Carbon Stl. 46:1650491 Bare 3.3 Carbon Stl. 12:1650691 Bare 3.3 Carbon Stl. 23:1650891 Bare 3.8 Carbon Stl. 44:1650871 Bare 10.5 Carbon Stl. 13:1650540-1 Lift .9 Carbon Stl. 43:1650541-1 Lift .9 Stn. Stl. 43:1NP322L01-1 Lift .98 Carbon Stl. 22:1NP322L02-1 Lift .98 Stn. Stl. 22:1650239-( ) Lift 4.0 Carbon Stl. 9:1650240-( ) Lift 4.0 Carbon Stl. 9:1NP443R01-1 Ram .74 Carbon Stl. 43:1650542-1 Ram .9 Carbom Stl. 43:1650543-1 Ram .9 Stn. Stl. 43:1NP322R01-1 Ram .98 Carbon Stl. 22:1NP322R02-1 Ram .98 Stn. Stl. 22:1NP431R Ram 1.8 Carbon Stl. 23:1NP631R Ram 1.8 Carbon Stl. 46:1NP434R Ram 3.3 Carbon Stl. 12:1NP634R Ram 3.3 Carbon Stl. 23:1NP834R Ram 3.8 Carbon Stl. 44:1650875 Ram 10.5 Carbon Stl. 20:1650971 Ram 10.5 Carbon Stl. 30:1
4 | Pump -to-Fluid Viscosity Guide
2-Ball Pumps
Chop-Check Pumps
43688.qxd 2/8/06 9:32 AM Page 7
Extrusion Packages • 5 Gallon | 5
Air Inlet Pressure Range. . . . . . . . . . . . . . . 30 - 150 PSI (2 - 10.2 bar)Fluid Pressure Range . . . . . . . . . . . . . . . . . 270 - 1350 PSI
(18.3 - 91.8 bar)Flow @ 75 Cycles/Minute:. . . . . . . . . . . . . . 4 GPM (15.1 lpm)Displacement Per Cycle . . . . . . . . . . . . . . . 11 in3
Lower Pump Material. . . . . . . . . . . . . . . . . . Carbon SteelPackings . . . . . . . . . . . . . . . . . . . . . . . . . . . . Thiokol LeatherPlunger Material. . . . . . . . . . . . . . . . . . . . . . Carbon SteelAir Motor. . . . . . . . . . . . . . . . . . . . . . . . . . . . 65445-BAir Motor Repair Kit. . . . . . . . . . . . . . . . . . . 61268Lower Pump End Series . . . . . . . . . . . . . . . 65965Lower Pump Repair Kit . . . . . . . . . . . . . . . . 637058
6502409:1 Ratio, Carbon Steel Extrusion Package
65814-B . . . . . . . . . . . . . . . . . . . . . . . . . . . .Carbon Steel Pump651840-1 . . . . . . . . . . . . . . . . . . . . . . . . . . .Carbon Steel Follower Plate65778 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Portable Lift66104 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Hose (Includes hose, extrusion
gun and nozzle)
Air Inlet Pressure Range. . . . . . . . . . . . . . . 30 - 150 PSI (2 - 10.2 bar)Fluid Pressure Range . . . . . . . . . . . . . . . . . 270 - 1350 PSI (18.3 - 91.8 bar)Flow @ 75 Cycles/Minute:. . . . . . . . . . . . . . 4 GPM (15.1 lpm)Displacement Per Cycle . . . . . . . . . . . . . . . 11 in3
Lower Pump Material. . . . . . . . . . . . . . . . . . Carbon SteelPackings . . . . . . . . . . . . . . . . . . . . . . . . . . . . Thiokol LeatherPlunger Material. . . . . . . . . . . . . . . . . . . . . . Carbon SteelAir Motor. . . . . . . . . . . . . . . . . . . . . . . . . . . . 65445-BAir Motor Repair Kit. . . . . . . . . . . . . . . . . . . 61268Lower Pump End Series . . . . . . . . . . . . . . . 65965Lower Pump Repair Kit . . . . . . . . . . . . . . . . 637058
6502399:1 Ratio, Carbon Steel Extrusion Package
65814-B . . . . . . . . . . . . . . . . . . . . . . . . . . . .Carbon Steel Pump651840-1 . . . . . . . . . . . . . . . . . . . . . . . . . . .Carbon Steel Follower Plate65778 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Portable Lift
Air Inlet Pressure Range. . . . . . . . . . . . . . . 30 - 150 PSI (2 - 10.2 bar)Fluid Pressure Range . . . . . . . . . . . . . . . . . 270 - 1350 PSI (18.3 - 91.8 bar)Flow @ 75 Cycles/Minute:. . . . . . . . . . . . . . 4 GPM (15.1 lpm)Displacement Per Cycle . . . . . . . . . . . . . . . 11 in3
Lower Pump Material. . . . . . . . . . . . . . . . . . Carbon SteelPackings . . . . . . . . . . . . . . . . . . . . . . . . . . . . TeflonPlunger Material. . . . . . . . . . . . . . . . . . . . . . Carbon SteelAir Motor. . . . . . . . . . . . . . . . . . . . . . . . . . . . 65445-BAir Motor Repair Kit. . . . . . . . . . . . . . . . . . . 61268Lower Pump End Series . . . . . . . . . . . . . . . 65965-1Lower Pump Repair Kit . . . . . . . . . . . . . . . . 637059
650239-19:1 Ratio, Carbon Steel Extrusion Package
65814-1B . . . . . . . . . . . . . . . . . . . . . . . . . . .Carbon Steel Pump651840-1 . . . . . . . . . . . . . . . . . . . . . . . . . . .Carbon Steel Follower Plate65778 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Portable Lift
650239
Air Powered Lift ONLY - Not a Ram
Package Contents
Package Contents
Basic Pump Performance
Basic Pump Performance
Package Contents Basic Pump Performance
43688.qxd 2/8/06 9:32 AM Page 8
6 | Extrusion Packages • 5 Gallon
NP322L01-122:1 Ratio, Carbon Steel Extrusion Package
NM2322E-11-P43 . . . . . . . . . . . . . . . . . . . . .Carbon Steel Pump
129121-400 . . . . . . . . . . . . . . . . . . . . . . . . .Air Filter/Regulator
651840-1 . . . . . . . . . . . . . . . . . . . . . . . . . . .Carbon Steel Follower Plate
67075 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Portable Lift
Air Inlet Pressure Range. . . . . . . . . . . . . . . 30 - 150 PSI (2 - 10.2 bar)
Fluid Pressure Range . . . . . . . . . . . . . . . . . 660 - 3300 PSI (44.8 - 244.4 bar)
Maximum Working Flow: . . . . . . . . . . . . . . . 1.0 GPM (3.8 lpm)
Displacement Per Cycle . . . . . . . . . . . . . . . 1.9 in3 (31.1 cm3)
Lower Pump Material. . . . . . . . . . . . . . . . . . Carbon Steel
Plunger Material. . . . . . . . . . . . . . . . . . . . . . 17 - 4 Stainless Steel
Air Motor. . . . . . . . . . . . . . . . . . . . . . . . . . . . 66915
Air Motor Repair Kit. . . . . . . . . . . . . . . . . . . 637316
Lower Pump End Series . . . . . . . . . . . . . . . 67100-P43
Lower Pump Repair Kit . . . . . . . . . . . . . . . . 637290-P43
Air Inlet Pressure Range. . . . . . . . . . . . . . . 30 - 150 PSI (2 - 10.2 bar)
Fluid Pressure Range . . . . . . . . . . . . . . . . . 660 - 3300 PSI (44.8 - 244.4 bar)
Maximum Working Flow . . . . . . . . . . . . . . . 1.0 GPM (3.8 lpm)
Displacement Per Cycle . . . . . . . . . . . . . . . 1.9 in3 (31.1 cm3)
Lower Pump Material. . . . . . . . . . . . . . . . . . 15 - 5 Stainless Steel
Plunger Material. . . . . . . . . . . . . . . . . . . . . . 17 - 4 Stainless Steel
Air Motor. . . . . . . . . . . . . . . . . . . . . . . . . . . . 66915
Air Motor Repair Kit. . . . . . . . . . . . . . . . . . . 637316
Lower Pump End Series . . . . . . . . . . . . . . . 67101-P43
Lower Pump Repair Kit . . . . . . . . . . . . . . . . 637291-P43
NP322L02-122:1 Ratio, Stainless Steel Extrusion Package
NM2322F-11-P43 . . . . . . . . . . . . . . . . . . . . .Stainless Steel Pump
P29122-600 . . . . . . . . . . . . . . . . . . . . . . . . .Air Filter/Regulator w/Gauge
651841-1 . . . . . . . . . . . . . . . . . . . . . . . . . . .Stainless Steel Follower Plate
67075 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Portable Lift
NP322L0X-1
Portable Lift Only - Not a Ram
Package Contents
Package Contents
Basic Pump Performance
Basic Pump Performance
Easy-RollDispensing of:
• Caulking• Mastics• Sealers• Heavy Lubricant• Paste Inks
43688.qxd 2/8/06 9:32 AM Page 9
Extrusion Packages • 5 Gallon | 7
Air Inlet Pressure Range. . . . . . . . . . . . . . . 30 - 150 PSI (2 - 10.2 bar)
Fluid Pressure Range . . . . . . . . . . . . . . . . . 660 - 3300 PSI (44.8 - 244.4 bar)
Maximum Working Flow: . . . . . . . . . . . . . . . 1.0 GPM (3.8 lpm)
Displacement Per Cycle . . . . . . . . . . . . . . . 1.9 in3 (31.1 cm3)
Lower Pump Material. . . . . . . . . . . . . . . . . . Carbon Steel
Plunger Material. . . . . . . . . . . . . . . . . . . . . . 17 - 4 Stainless Steel
Air Motor. . . . . . . . . . . . . . . . . . . . . . . . . . . . 66915
Air Motor Repair Kit. . . . . . . . . . . . . . . . . . . 637316
Lower Pump End Series . . . . . . . . . . . . . . . 67100-P43
Lower Pump Repair Kit . . . . . . . . . . . . . . . . 637290-P43
NP322R01-122:1 Ratio, Carbon Steel Extrusion Package
NM2322E-11-P43 . . . . . . . . . . . . . . . . . . . . .Carbon Steel Pump
F25241-100 . . . . . . . . . . . . . . . . . . . . . . . . .Air Filter
R27241-600 . . . . . . . . . . . . . . . . . . . . . . . . .Air Regulator
651840-1 . . . . . . . . . . . . . . . . . . . . . . . . . . .Carbon Steel Follower Plate
651615-C . . . . . . . . . . . . . . . . . . . . . . . . . . .Single Post Ram
66713 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Optional Portability Kit
67189 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Hold Down Kit Included
Air Inlet Pressure Range. . . . . . . . . . . . . . . 30 - 150 PSI (2 - 10.2 bar)
Fluid Pressure Range . . . . . . . . . . . . . . . . . 660 - 3300 PSI (44.8 - 244.4 bar)
Maximum Working Flow: . . . . . . . . . . . . . . . 1.0 GPM (3.8 lpm)
Displacement Per Cycle . . . . . . . . . . . . . . . 1.9 in3 (31.1 cm3)
Lower Pump Material. . . . . . . . . . . . . . . . . . 15 - 5 Stainless Steel
Plunger Material. . . . . . . . . . . . . . . . . . . . . . 17 - 4 Stainless Steel
Air Motor. . . . . . . . . . . . . . . . . . . . . . . . . . . . 66915
Air Motor Repair Kit. . . . . . . . . . . . . . . . . . . 637316
Lower Pump End Series . . . . . . . . . . . . . . . 67101-P43
Lower Pump Repair Kit . . . . . . . . . . . . . . . . 637291-P43
NP322R02-122:1 Ratio, Stainless Steel Extrusion Package
NM2322F-11-P43 . . . . . . . . . . . . . . . . . . . . .Stainless Steel Pump
F25241-100 . . . . . . . . . . . . . . . . . . . . . . . . .Air Filter
R27241-600 . . . . . . . . . . . . . . . . . . . . . . . . .Air Regulator
651841-1 . . . . . . . . . . . . . . . . . . . . . . . . . . .Stainless Steel Follower Plate
651615-C . . . . . . . . . . . . . . . . . . . . . . . . . . .Single Post Ram
66713 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Optional Portability Kit
67189 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Hold Down Kit Included
NP322R0X-1
Package Contents
Package Contents
Basic Pump Performance
Basic Pump Performance
StationaryDispensing of:
• RTV Silicones• Mastics• Sealers• Heavy Lubricant• Paste Inks
43688.qxd 2/8/06 9:32 AM Page 10
8 | Extrusion Packages • 5 Gallon
Air Inlet Pressure Range. . . . . . . . . . . . . . . 30 - 150 PSI (2 - 10.2 bar)Fluid Pressure Range . . . . . . . . . . . . . . . . . 1290 - 6450 PSI (87.7 - 438.7 bar)Flow @ 75 Cycles/Minute:. . . . . . . . . . . . . . 0.9 GPM (3.4 lpm)Displacement Per Cycle . . . . . . . . . . . . . . . 2.8 in3 (45.8 cm3)Lower Pump Material. . . . . . . . . . . . . . . . . . Carbon SteelPlunger Material. . . . . . . . . . . . . . . . . . . . . . 17-4 Stainless Steel (Chrome Plated)Air Motor. . . . . . . . . . . . . . . . . . . . . . . . . . . . 65440Air Motor Repair Kit. . . . . . . . . . . . . . . . . . . 61268Lower Pump End Series . . . . . . . . . . . . . . . 67100-P43Lower Pump Repair Kit . . . . . . . . . . . . . . . . 637290-P43
650540-143:1 Ratio, Carbon Steel Extrusion Package
67120-P43 . . . . . . . . . . . . . . . . . . . . . . . . . .Carbon Steel Pump651840-1 . . . . . . . . . . . . . . . . . . . . . . . . . . .Carbon Steel Follower Plate67075 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Portable Lift
Air Inlet Pressure Range. . . . . . . . . . . . . . . 30 - 150 PSI (2 - 10.2 bar)Fluid Pressure Range . . . . . . . . . . . . . . . . . 1290 - 6450 PSI (87.7 - 438.7 bar)Flow @ 75 Cycles/Minute:. . . . . . . . . . . . . . 0.9 GPM (3.4 lpm)Displacement Per Cycle . . . . . . . . . . . . . . . 2.8 in3 (45.8 cm3)Lower Pump Material. . . . . . . . . . . . . . . . . . 15 - 5 Stainless SteelPlunger Material. . . . . . . . . . . . . . . . . . . . . . 17-4 Stainless Steel (Chrome Plated)Air Motor. . . . . . . . . . . . . . . . . . . . . . . . . . . . 65440Air Motor Repair Kit. . . . . . . . . . . . . . . . . . . 61268Lower Pump End Series . . . . . . . . . . . . . . . 67101-P43Lower Pump Repair Kit . . . . . . . . . . . . . . . . 637291-P43
650541-143:1 Ratio, Stainless Steel Extrusion Package
67121-P43 . . . . . . . . . . . . . . . . . . . . . . . . . .Stainless Steel Pump651841-1 . . . . . . . . . . . . . . . . . . . . . . . . . . .Stainless Steel Follower Plate67075 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Portable Lift
650540-1
Air Powered Lift ONLY - Not a Ram
Package Contents
Package Contents
Basic Pump Performance
Basic Pump Performance Easy-RollHigh PressureDispensing of:
• Body Sealers• Window Glaze• Caulking Compounds• Heavy Lubricant• Construction Adhesive
43688.qxd 2/8/06 9:32 AM Page 11
Extrusion Packages • 5 Gallon | 9
Air Inlet Pressure Range. . . . . . . . . . . . . . . 30 - 150 PSI (2 - 10.2 bar)Fluid Pressure Range . . . . . . . . . . . . . . . . . 1290 - 6450 PSI
(87.7 - 438.7 bar)Flow @ 75 Cycles/Minute:. . . . . . . . . . . . . . 0.9 GPM (3.4 lpm)Displacement Per Cycle . . . . . . . . . . . . . . . 2.8 in3 (45.8 cm3)Lower Pump Material. . . . . . . . . . . . . . . . . . Carbon SteelPlunger Material. . . . . . . . . . . . . . . . . . . . . . 17 - 4 Stainless Steel
(Chrome Plated)Air Motor. . . . . . . . . . . . . . . . . . . . . . . . . . . . 65440Air Motor Repair Kit. . . . . . . . . . . . . . . . . . . 61268Lower Pump End Series . . . . . . . . . . . . . . . 67100-P43Lower Pump Repair Kit . . . . . . . . . . . . . . . . 637290-P43
650542-1 (-2 Same except Follower is 651840-2)43:1 Ratio, Carbon Steel Extrusion Package
67120-P43 . . . . . . . . . . . . . . . . . . . . . . . . . .Carbon Steel Pump651840-1 . . . . . . . . . . . . . . . . . . . . . . . . . . .Carbon Steel Follower Plate651615-C . . . . . . . . . . . . . . . . . . . . . . . . . . .Single Post Ram66713 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Optional Portability Kit67189 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Hold Down Kit Included
Package Contents Basic Pump Performance
Air Inlet Pressure Range. . . . . . . . . . . . . . . 30 - 150 PSI (2 - 10.2 bar)Fluid Pressure Range . . . . . . . . . . . . . . . . . 1290 - 6450 PSI (87.7 - 438.7 bar)Flow @ 75 Cycles/Minute:. . . . . . . . . . . . . . 0.9 GPM (3.4 lpm)Displacement Per Cycle . . . . . . . . . . . . . . . 2.8 in3 (45.8 cm3)Lower Pump Material. . . . . . . . . . . . . . . . . . 15 - 5 Stainless SteelPlunger Material. . . . . . . . . . . . . . . . . . . . . . 17 - 4 Stainless Steel (Chrome Plated)Air Motor. . . . . . . . . . . . . . . . . . . . . . . . . . . . 65440Air Motor Repair Kit. . . . . . . . . . . . . . . . . . . 61268Lower Pump End Series . . . . . . . . . . . . . . . 67101-P43Lower Pump Repair Kit . . . . . . . . . . . . . . . . 637291-P43
650543-1 43:1 Ratio, Stainless Steel Extrusion Package67121-P43 . . . . . . . . . . . . . . . . . . . . . . . . . .Stainless Steel Pump651841-1 . . . . . . . . . . . . . . . . . . . . . . . . . . .Stainless Steel Follower Plate651615-C . . . . . . . . . . . . . . . . . . . . . . . . . . .Single Post Ram66713 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Optional Portability Kit67189 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Hold Down Kit Included
65054X-1
Package Contents
Basic Pump Performance
43688.qxd 2/8/06 9:32 AM Page 12
10 | Extrusion Systems • 55 Gallon
To get the desired pump ratio and follower options, replace the X with appropriate numbers from the“Pump Information,” “Follower Options” and “Packing Options” Charts.
Packages include Pump, 651616-X Ram, Follower Plate Assembly,65940 Filter/Regulator-Lubricator Kit, 91790 Air Motor Muffler & 90° Outlet Elbow.
21 30:1 Stainless Steel 2-Ball Pump(#650485-X43) Page 45
22 22:1 Stainless Steel 2-Ball Pump(#650484-X43) Page 41
24 11:1 Stainless Steel 2-Ball Pump(#650483-X43) Page 38
31 23:1 Carbon Steel Chop Check Pump(#650492-X43-B) Page 56
34 12:1 Carbon Steel Chop Check Pump(#650491-X43-B) Page 51
4-1/4” Air Motor
NP4 XXR - XX - XXX
Series
02 Aluminum Follower Plate withPolyurethane Double-Lipped Seal
52 Teflon Coated Aluminum Follower Platewith Polyurethane Double-Lipped Seal
* For additional follower options see pages 16-18.
Follower Options
343 Glass-Filled Teflon (Upper & Lower)C43 UHMW-PE (Upper & Lower)G43 UHMW-PE/Leather StaggeredP43 UHMW-PE/Teflon Staggered
(Upper) / UHMW-PE (Lower)R43 Teflon/UHMW-PE Staggered /
(Upper) Teflon (Lower)
Packing Options
Pump Information
Ordering
Popular Model Example:NP434R-02-G43
43688.qxd 2/8/06 9:32 AM Page 13
Extrusion Systems • 55 Gallon | 11
PumpInformation
Series
NP834R-02-G43
To get the desired pump ratio and follower options, replace the X with appropriatenumbers from the “Pump Information,” “Follower Options” and “Packing Options” Charts.
21 60:1 Stainless Steel 2-Ball Pump(#650685-X43) Page 49
22 45:1 Stainless Steel 2-Ball Pump(#650684-X43) Page 47
24 23:1 Stainless Steel 2-Ball Pump(#650683-X43) Page 42
31 46:1 Carbon Steel Chop CheckPump (#650692-X43-B) Page 64
34 23:1 Carbon Steel Chop CheckPump (#650691-X43-B) Page 57
6” Air Motor
NP6 XXR - XX - XXX
02 Aluminum Follower Plate withPolyurethane Double-Lipped Seal
03 Aluminum Follower Plate with EPRDouble-Lipped seal
52 Teflon Coated Aluminum Follower Platewith Polyurethane Double-Lipped Seal *
For additional follower options see pages 16-18.
Follower Options
343 Glass-Filled Teflon (Upper & Lower)C43 UHMW-PE (Upper & Lower)G43 UHMW-PE/Leather StaggeredP43 UHMW-PE/Teflon Staggered (Upper) /
UHMW-PE (Lower)R43 Teflon/UHMW-PE Staggered (Upper) /
Teflon (Lower)
Packing Options
PumpInformation
Series
34 44:1 Carbon SteelChopCheck Pump(#650891-X4D) Page 63
8” Air Motor
NP8 XXR - XX - XXX
02 Aluminum Follower Plate with PolyurethaneDouble-Lipped Seal
52 Teflon Coated Aluminum Follower Plate withPolyurethane Double-Lipped Seal
* For additional follower options see pages 16-18.
Follower Options
34D Glass-Filled Teflon (Upper & Lower)C4D UHMW-PE (Upper & Lower)G4D UHMW-PE/Leather StaggeredJ3E Polyurethane (Upper)/UHMW-PE (Lower)P4D UHMW-PE/Teflon Staggered (Upper)/UHMW-PE (Lower)R4D Teflon/UHMW-PE Staggered (Upper)/Teflon (Lower)
Packing Options
Popular Model Example:NP624R-02-G43
Packages include Pump, 651616-X Ram, Follower Plate Assembly,65940 Filter-Regulator-Lubricator Kit, 91790 Air Motor Muffler & 90° Outlet Elbow.
Packages include Pump, 651616-X Ram, Follower Plate Assembly,651729 Filter-Regulator-Lubricator Kit 92460, Air Motor Muffler & 90° Outlet Elbow.
Ordering
43688.qxd 2/8/06 9:32 AM Page 14
12 | Extrusion Accessories • Floor Mounts / Rams
Model Pumps MountingNumber Description Used With Footprint
65138 Floor Mount - Accepts suction line 41⁄4” & 6” air motor, 2-ball and Afrom bulk containers or mixing tanks. extrusion pumps. Also 8”3” NPT(F) inlet. 1/4” NPT(F) 40:1 2-ball and 44:1 vent port with plug. extrusion pumps. Hydraulic-.8:1,
3.3:1 2-ball 2:1, 3.6:1 Extrusion -28:1, 45:1, 65:1
65139 Floor Mount - Accepts suction line 8”, 10” and 12” air motor 2-ball Bfrom bulk containers or mixing tanks. and extrusion pumps. Hydraulic-3” NPT(F) inlet. 1/4” NPT(F) vent 12:1, 2.4:1.port with plug.
ModelNumber Description
628088-7 Material Supply Hose - Heavy duty (1” diameter) hose features neopreneconstruction with a 5,000 psi max. working pressure capacity. Both ends 1”NPT(M). Length: 7 ft.
67073 Ball Valve - For use with 628088-7 material supply hose. 4,500 psi max.working pressure rated.
628089-X Material Hose With Fittings - 3” diameter hose has cross-linked polyethylene(internal) and neoprene (external) construction. Hose comes with femalecam-lever locking coupler, male adapter, cam-lever locking dust cap and dustplug. Length: 2 ft. (628089-2), 4 ft. (628089-4) & 6 ft. (628089-6). Maximumworking pressure: 125 psi
65138, Pump Floor Mount - See above for floor mount information.65139
Model Used Follower PlateNumber Description With Used With
651615-D Single Post Ram - For use with “N” Series 651840-X,materials up to 1,000,000 CPS viscosity. 22:1 pumps FollowerFor 5-gallon containers. Hold-down & 41⁄4” air motor Platesclamps secure pail. 66713 Portability Kit 6” air motoravailable for mobile applications. 43:1 extrusion
pump excpt modelslisted for 651613-B
66713 Portability Kit - Mounts directly to 651615-Cthe base of the 651615-C Ram, to Single Postallow ease of portability. Will clear Rams and28” (711 mm) openings. Has 12” Ram packages(305 mm) tires.
65139
D
D
C
C
B
B
AA
651615-D
Floor Mounts
Bulk/Tote tank Supply Components
Rams for 5-Gallon Drums
Mounting footprint is strictly a reference letter used to simplify the matching of pumps tofollower plates and related accessories. (i.e. pump with “A” mounting footprint will fit anyaccessory with “A” mounting footprint.
43688.qxd 2/8/06 9:32 AM Page 15
Extrusion Accessories • Rams | 13
651616-X
Rams
Two Post Ram - For use with materials over 200,000 CPS viscosity. Consists of two 3-1/2”diameter air cylinders joined by cross-over tubes and welded to a steel base. Cast aluminumfollower plate has double edge Buna N wiper to clean drum and seal material from atmosphere.
Base - 39” (991 mm) x 24” (610 mm)Raised height - 101” (2.5 m)Lowered position height - 63” (1.6 m).
Model: Follower: Plate Style: Container: Mounting Footprint: Coating: Wiper Type: Wiper Material
651616-1 66516 Flat 55-Gallon A None Double Lip Nitrile651616-2 66516-1 Flat 55-Gallon A None Double Lip Polyurethane651616-3 66516-2 Flat 55-Gallon A None Double Lip EPR651616-4 66517 Flat 55-Gallon B None Double Lip Nitrile651616-5 66517-1 Flat 55-Gallon B None Double Lip Polyurethane651616-6 66517-2 Flat 55-Gallon B None Double Lip EPR651616-13 67195-2 Tapered 55-Gallon A None Tube Type EPR651616-14 67195-1 Tapered 55-Gallon A None Tube Type Nitrile651616-15 67195-3 Tapered 55-Gallon A None Tube Type Viton651616-16 67196-2 Tapered 55-Gallon B None Tube Type EPR651616-17 67196-1 Tapered 55-Gallon B None Tube Type Nitrile651616-18 67196-3 Tapered 55-Gallon B None Tube Type Viton651616-52 66516-6 Flat 55-Gallon A Teflon Double Lip Polyurethane651616-53 66516-7 Flat 55-Gallon A Teflon Double Lip EPR651616-54 66517-5 Flat 55-Gallon B Teflon Double Lip Nitrile651616-55 66517-6 Flat 55-Gallon B Teflon Double Lip Polyurethane651616-56 66517-7 Flat 55-Gallon B Teflon Double Lip EPR651616-57 67195-6 Tapered 55-Gallon A Teflon Tube Type EPR651616-58 67195-5 Tapered 55-Gallon A Teflon Tube Type Nitrile651616-59 67195-7 Tapered 55-Gallon A Teflon Tube Type Viton651616-60 67196-6 Tapered 55-Gallon B Teflon Tube Type EPR651616-61 67196-5 Tapered 55-Gallon B Teflon Tube Type Nitrile651616-62 67196-7 Tapered 55-Gallon B Teflon Tube Type Viton
Mounting footprint is strictly a reference letter used to simplify the matching of pumps tofollower plates and related accessories. (i.e. pump with “A” mounting footprint will fit anyaccessory with “A” mounting footprint.
NOTE: Bare Ram - No follower plate - P/N-67081
43688.qxd 2/8/06 9:32 AM Page 16
14 | Extrusion Accessories • Rams
66353-1 Pump Stabilizing Brackets - Attaches 8”, 10”, 12” –easily to 651616 Ram. Kit includes hardware. Air Motor Pumps
67133 Drum Hold-Down Brackets - – –Kit includes 2 brackets, clamp screws, nuts.Used with 651616-XX. 67133
Pump/Drum Stabilizing BracketsModel Follower Plate
Number Description Used With Used With
43688.qxd 2/8/06 9:32 AM Page 17
Extrusion Accessories • Rams | 15
Heavy-duty Ram - Features 5-1/2” diameter post construction capable ofdelivering 0-11 psi* follower down force. This extra measure of down forcemakes the 651612 Ram the best choice for the hard-duty supply of heavy inks,RTV silicones, caulkings, varnishes, highly viscous adhesives and much more.Drum hold down bracket included.* WARNING: Before using maximum follower down force, check container or consult container manufacturer for maximum pressure rating.
Single Post Ram / Lift - Provides responsive pump lifting and pumplowering – with sufficient downforce to permit pump extrusion of materials up to500,000 c.p.s. It’s ability to revolve 360-degrees allows the ongoing placementand rotation of three, 55-Gallon containers – a critical feature in applications thatdemand continuous material supply.
651612-X
Extra Heavy-Duty Rams55-Gallon Containers
Single Post Rams
Model: Follower: Plate Style: Container: Mounting Footprint: Coating: Wiper Type: Wiper Material651612-1 66516 Flat 55-Gallon A None Double Lip Nitrile651612-2 66516-1 Flat 55-Gallon A None Double Lip Polyurethane651612-3 66516-2 Flat 55-Gallon A None Double Lip EPR651612-4 66517 Flat 55-Gallon B None Double Lip Nitrile651612-5 66517-1 Flat 55-Gallon B None Double Lip Polyurethane651612-6 66517-2 Flat 55-Gallon B None Double Lip EPR651612-7 67195-2 Flat 55-Gallon B None Tube Type EPR651612-10 67196-2 Tapered 55-Gallon B None Tube Type EPR651612-11 67196-1 Tapered 55-Gallon B None Tube Type Nitrile651612-12 67196-3 Tapered 55-Gallon B None Tube Type Viton651612-59 67195-7 Flat 55-Gallon A Teflon Tube Type Viton651612-9 67195-3 Flat 55-Gallon A Teflon Tube Type Viton
651614-1(Pump sold separate)
651614-2(Pump, Follower, and Follower
Assist Kit sold separate)
651614-1 4-1/4”-6” Air Motors 110” 63” 1/4” NPT651614-2 8” to 12” Air Motors 110” 63” 1/4” NPT651614-3 Small Hydraulic Motor 110” 63” 1/4” NPT651614-4 Large Hydraulic Motor 110” 63” 1/4” NPT
The above models include the brackets and hardware needed to accommodate two-ball or extrusion tie-rod style pumps.
65116 Follower Plate Air Assist Kit - Air assist valve supplies air pressure tobottom of follower to aid in bringing follower to top in less time. Kitincludes valve, hose and necessary mounting hardware.
Model Fits Height Height AirNumber ARO Pump Raised Lowered Inlet
Mounting footprint is strictly a reference letter used to simplify the matching of pumps tofollower plates and related accessories. (i.e. pump with “A” mounting footprint will fit anyaccessory with “A” mounting footprint.
43688.qxd 2/8/06 9:32 AM Page 18
16 | Extrusion Accessories • Follower Plates
651842-166469 66732-1
Model MountingNumber Description Used With Footprint
91364-10 Seal Protectors - Package of 10 for 5-gallon followers 5-gallon -to be inserted between the follower plate and the material Follower Platesin the container. This helps to prevent corrosive materialsfrom attacking the wiper and reduces clean-up time.
67136 Follower Plate Adapter - For attaching Integrity 66248 & 66516 Ato follower plates or floor stand. Includes stainless Followers.steel adapter w/2” NPT(F) threads, seal and 651616-1,-2,-3 Rams.hardware. 65138 Floor Mounts
67136
Follower Plates 5 Gallon Containers
Accessories
Model: Material: Coating: Wiper Type: Wiper Material: Ram/Lift Mounting Used With: Footprint:
66469 Carbon Steel None Single Lip Nitrile 651614-1, 651616-X A651615-C Rams,640169
66731 Carbon Steel Electroless Nickel Single Lip Nitrile 651615-C Rams C66731-1 Carbon Steel Electroless Nickel Double Lip Polyurethane 651614-4, 651616 C
& 651615-C Rams66731-2 Carbon Steel Electroless Nickel Double Lip EPR 651614-1, 651615-C Rams C66732 Carbon Steel Electroless Nickel Double Lip Nitrile 651614-1, 651615-C Rams A
651612-X66732-1 Carbon Steel Electroless Nickel Double Lip Polyurethane 651614-1, 651615-C Rams A
651612-X66732-2 Carbon Steel Electroless Nickel Double Lip EPR 651614-1, 651615-C Rams A
651612-X651840-1 Carbon Steel None 290-mm Single Lip Polyethylene/ 651615-C Rams C
Urethane 67075-X, 65778 Lift651840-2 Carbon Steel None 295mm. Designed Nitrile 651615-C Rams C
for metric pails 67075-X, 65778 Lift651840-3 Carbon Steel None 311.9mm. Designed Polyethylene/ 651615-C Rams C
for metric pails. Urethane 67075-X, 65778 Lift651841-1 Stainless Steel None 290-mm Polyethylene/ 651615-C Rams C
Urethane 67075-X, 65778651842-1 Stainless Steel None 290-mm Polyethylene/ 651615-C Rams D
Urethane
Mounting footprint is strictly a reference letter used to simplify the matching of pumps tofollower plates and related accessories. (i.e. pump with “A” mounting footprint will fit anyaccessory with “A” mounting footprint.
43688.qxd 2/8/06 9:32 AM Page 19
Extrusion Accessories • Follower Plates | 17
66248 66516
Follower Plates 55-Gallon Containers
Model: Material: Coating: Wiper Type: Wiper Material: Ram/Lift Used With: Mounting Footprint:
66248 Carbon Steel None Single Lip Nitrile, Polyethylene 651614-X Ram Abackup 640169 Lift
66248-1 Carbon Steel None Single Lip Polyethylene 651614-X Ram A640169 Lift
66516 Aluminum None Double Lip Nitrile 651614-X A651616-X Rams
651612-X66516-1 Aluminum None Double Lip Polyurethane 651614-X A
651616-X Rams66516-2 Aluminum None Double Lip EPR 651614-X A
651616-X Rams651612-X
66516-5 Aluminum Teflon Double Lip Nitrile 651614-X A651616-X Rams
651612-X66516-6 Aluminum Teflon Double Lip Polyurethane 651614-X A
651616-X Rams651612-X
66516-7 Aluminum Teflon Double Lip EPR 651614-X A651616-X Rams
651612-X66517 Aluminum None Double Lip Nitrile 651614-X B
651616-X Rams651612-X
66517-1 Aluminum None Double Lip Polyurethane 651614-X B651616-X Rams
651612-X66517-2 Aluminum None Double Lip EPR 651614-X B
651616-X Rams651612-X
66517-5 Aluminum Teflon Double Lip Nitrile 651614-X B651616-X Rams
651612-X66517-6 Aluminum Teflon Double Lip Polyurethane 651614-X B
651616-X Rams651612-X
66517-7 Aluminum Teflon Double Lip EPR 651614-X B651616-X Rams
651612-X
Mounting footprint is strictly a reference letter used to simplify the matching of pumps tofollower plates and related accessories. (i.e. pump with “A” mounting footprint will fit anyaccessory with “A” mounting footprint.
43688.qxd 2/8/06 9:32 AM Page 20
18 | Extrusion Accessories • Follower Plates
Model Number Description Ram Used With Mounting Footprint:
67136
67134 Follower Plate Adapter - 66516-X & 6719X-X Followers CFor attaching NM2322X-X & 651616-1, -2, -3, 651614-X6712X-P43 pumps to 55-gal. and 651612-X Rams.follower plates or floor stands 65138 Floor Mount
67136 Follower Plate Adapter - 66248 & 66516 AFor attaching Integrity pumps Followers.to follower plates or floor stand. 651616-1, -2, -3 RamsIncludes stainless steel adapter w/2” 65138 Floor MountNPT(F) threads, seal and hardware.
91363-10 Seal Protectors - Package of 10 for 55-gallon 55-Gallon -followers to be inserted between the follower Followerplate and the material in the container. This Plateshelps to prevent corrosive materials from attacking the wiper and reduces clean-up time.
Follower Plates 55-Gallon Containers
Pump Follower/Floor Stand Adapters/Seal Protectors
Model: Material: Coating: Wiper Type: Wiper Material: Ram Used With: Mounting Footprint:67195-1 Aluminum None Tube Type Neoprene 651614-X A
651616-X 651612-X
67195-2 Aluminum None Tube Type EPR 651614-X A651616-X 651612-X
67195-3 Aluminum None Tube Type Viton 651614-X A651616-X 651612-X
67195-5 Aluminum Teflon Tube Type Neoprene 651614-X A651616-X 651612-X
67195-6 Aluminum Teflon Tube Type EPR 651614-X A651616-X 651612-X
67195-7 Aluminum Teflon Tube Type Viton 651614-X A651616-X 651612-X
67196-1 Aluminum None Tube Type Nitrile 651614-X B651616-X 651612-X
67196-2 Aluminum None Tube Type EPR 651614-X B651616-X 651612-X
67196-3 Aluminum None Tube Type Viton 651614-X B651616-X 651612-X
67196-5 Aluminum Teflon Tube Type Nitrile 651614-X B651616-X 651612-X
67196-6 Aluminum Teflon Tube Type EPR 651614-X B651616-X 651612-X
67196-7 Aluminum Teflon Tube Type Viton 651614-X B651616-X 651612-X
6719X-X
Mounting footprint is strictly a reference letter used to simplify the matching of pumps tofollower plates and related accessories. (i.e. pump with “A” mounting footprint will fit anyaccessory with “A” mounting footprint.
43688.qxd 2/8/06 9:32 AM Page 21
Extrusion Accessories • Fluid Pressure Regulators | 19
Code Description Code DescriptionC/S Carbon SteelS/S Stainless Steel
T/C Tungsten Carbide
651780-A1A-B C/S T/C 400-1,250 (28-86) 3,000 (207)651780-A1B-B C/S T/C 1,000-3,000 (69-207) 6,000 (414)651780-A3A-B S/S T/C 400-1,250 (28-86) 3,000 (207)651780-A3B-B S/S T/C 1,000-3,000 (69-207) 6,000 (414)
651780-B1A-B C/S T/C 400-1,250 (28-86) 3,000 (207)651780-B1B-B C/S T/C 1,000-3,000 (69-207) 6,000 (414)651780-B3A-B S/S T/C 400-1,250 (28-86) 3,000 (207)651780-B3B-B S/S T/C 1,000-3,000 (69-207) 6,000 (414)
651781-B1B-B C/S T/C 1000-3,000 (7-207) 3,000 (207)651781-B3B-B S/S T/C 1000-3,000 (7-207) 3,000 (207)
651780-B1R-B C/S T/C 400-5,000 (14-345) 6,000 (414)651780-B3R-B S/S T/C 400-5,000 (14-345) 6,000 (414)
651780-C1B-B C/S T/C 750-2,500 (52-172) 6,000 (414)651780-C1C-B C/S T/C 2,000-3,000 (138-345) 6,000 (414)651780-C3B-B C/S T/C 750-2,500 (52-172) 6,000 (414)
651781-C1B-B C/S T/C 1000-3,000 (7-207) 3,000 (207)651781-C3B-B S/S T/C 1000-3,000 (7-207) 3,000 (207)
651780-C1R-B C/S T/C 750-5,000 (52-345) 6,000 (414)651780-C3R-B S/S T/C 750-5,000 (52-345) 6,000 (414)** Flow rates tested in 55 CPS material
Model Base Regulated Pressure Max. InletNumber Housing Seat Range PSI (bar) Pressure PSI (bar)
Downstream Regulators
Backpressure Models
Material Codes
3/8” ports, standard flow to 3 GPM (11.4 liters)
3/8” ports, high-flow to 6 GPM (22.7 liters)
3/8” ports, high-flow to 6 GPM (22.7 liters)
3/4” ports, mastic-flow to 20 GPM (75.7 liters)**
3/8” ports, remote models, high-flow to 6 GPM(22.7 liters)
3/4” ports, backpressure models, mastic-flow to20 GPM (75.7 liters)**
3/4” ports, remote models, mastic-flow to 20 GPM(75.7 liters)**
3/4” Ports Model
High-Pressure Remote Model
High Pressure Fluid RegulatorThe ARO I.D.L.
®
Fluid Regulatorfeatures smooth, consistent pressureregulation with easy-turn adjustment.Patented easy-access seat plugpermits immediate service access tothe regulator’s ball and seat.Patented “floating” ball and seatdesign maintains proper regulation,even during significant fluctuations inline pressure.
43688.qxd 2/8/06 9:32 AM Page 22
20 | Extrusion Accessories • Fluid Pressure Regulators
Downstream Regulators
Backpressure Regulators
3/S 300 Series Stainless SteelS/S Stainless SteelT/C Tungsten Carbide
Z/A Zinc Aluminum
651790-A1B-B Z/A T/C 5-30 (0-2) 120 (8.3) 750 (51.7) 0-60 (0-4)651790-A1C-B Z/A T/C 20-60 (1.3-4.1) 120 (8.3) 750 (51.7) 0-60 (0-4)651790-A1D-B Z/A T/C 50-200 (3.4-14) 600 (41.3) 750 (51.7) 0-300 (0-20)651790-A2D-B S/S 4/S 50-200 (3.4-14) 600(41.3) 750 (51.7) 0-300 (0-20)651790-A3B-B S/S T/C 5-30 (0-2) 120 (8.3) 750 (51.7) 0-60 (0-4)651790-A3C-B S/S T/C 20-60 (1.3-4.1) 120 (8.3) 750 (51.7) 0-60 (0-4)651790-A3D-B S/S T/C 50-200 (3.4-14) 600 (41.3) 750 (51.7) 0-300 (0-20)651790-A4B-B S/S 3/S 5-30 (0-2) 120 (8.3) 500 (34) 0-60 (0-4)651790-A4C-B S/S 3/S 20-60 (1.3-4.1) 120 (8.3) 500 (34) 0-60 (0-4)651790-A4D-B S/S 3/S 50-200 (3.4-14) 600 (41.3) 500 (34) 0-300 (0-20)Gauge Included.
651790-B1D-B Z/A T/C 30-200 (2-14) 600 (41.4) 1250 (86) 0-300 (0-20)651790-B1E-B Z/A T/C 100-800 (7-55) 1,250 (86.2) 1250 (86) 0-1,000 (0-69)651790-B3D-B S/S T/C 30-200 (2-14) 600 (41.4) 1250 (86) 0-300 (0-20)651790-B3E-B S/S T/C 100-800 (7-55) 1,250 (86.2) 1250 (86) 0-1,000 (0-69)651790-B4D-B S/S 3/S 30-200 (2-14) 600 (41.4) 500 (34) 0-300(0-20)Gauge Included.
651791-B1D-B Z/A T/C 0-200 (0-14) 200 (14) 200 (14) 0-300 (0-20)651791-B1E-B Z/A T/C 0-800 (0-55) 800 (55) 800 (55) 0-1,000 (0-69)651791-B3D-B S/S T/C 0-200 (0-14) 200 (14) 200 (14) 0-300 (0-20)651791-B3E-B S/S T/C 0-800 (0-55) 800 (55) 800 (55) 0-1,000 (0-69)651791-B4D-B S/S 3/S 0-200 (0-14) 200 (14) 200 (14) 0-300 (0-20)
651790-A1R-B Z/A T/C 30-200 (2-14) 500 (34) 750 (51.7) -*651790-A3R-B S/S T/C 30-200 (2-14) 500 (34) 750 (51.7) -651790-A4R-B S/S 3/S 30-200 (2-14) 500 (34) 500 (34) -
*651790-B4R-B S/S 3/S 30-200 (2-14) 500 (34) - -*Gauge NOT Included.** Flow rates tested in 30 wt. oil
651791-C3D-B S/S T/C 0-200 (0-14) 200 (14) 200 (14) 0-300 (0-20)651791-C4D-B S/S 3/S 0-200 (0-14) 200 (14) 200 (14) 0-300 (0-20)**Flow rates tested in 55 CPS Material
Low Pressure Fluid RegulatorThe ARO I.D.L.
®
Fluid Regulator featuressmooth, consistent pressure regulationwith easy-turn adjustment. Patented easy-access seat plug permits immediateservice access to the regulator’s ball andseat. Patented “floating” ball and seatdesign maintains proper regulation, evenduring significant fluctuations in linepressure.
3/8” Ports Model
1 1/4” Ports Model
Low-Pressure Remote Model
3/8” ports, standard flow to 3 GPM (11.4 liters)
Reg. Pressure Working GaugeModel Base Range Pressure w/Gage Inlet Pressure
Number Housing Seat PSI (bar) PSI (bar) Pressure Range
3/8” ports, high-flow to 6 GPM (22.7 liters)
3/8” ports, remote models, flow to 3 GPM (11.4 liters)
3/8” ports, remote models, flow to 6 GPM** (22.7 liters)
3/8” ports, high-flow to 6 GPM (22.7 liters)
1-1/4” ports, system-flow** to 18.5 GPM (701)
Code Description Code Description
Material Codes
43688.qxd 2/8/06 9:32 AM Page 23
Accessories • Fluid Metering System | 21
ARO® metered pumping systems provide an economicalmethod of dispensing fluids into containers or batchprocesses in desired quantities. Among the many benefitsthese systems offer are increased productivity. Improvedaccuracy, and decreased product waste. As always, yourARO representative is prepared to discuss your meteringsystem needs.
665009
Typical Metering SystemMeasuring Cylinder SystemUtilize ARO pumps, measuring cylinders, a manual 4-way fluid controlvalve, standard hoses and dispensing valves. Shifting the controlvalve in either direction will allow the cylinder to fill to a pre-set volume.
Measuring Cylinders665006 Measures .05 to 4 ounces, 9-1/2” long, 3” wide and 4-1/8” high. Dispenses
predetermined quantities of fluid or semi-fluid material. 5,000 P.S.I. pressure,1/4 inch NPTF. Constructed of carbon steel with neoprene seals & Buna-NO-rings.
665007 Measures 4 to 8 ounces, 12” long 3” wide and 4-1/8 high. 5,000 P.S.I.pressure rating.
665008 Measures 12 to 16 ounces, 17” long 3” wide and 4-1/8” high. 5,000 P.S.I.pressure rating.
Manual Control Valve665009 Four-way control valve for ARO measuring cylinders. Pressure rating up to
5,000 P.S.I. All steel consturction. 9-1/4 high, 9” long, 2-1/2” wide, 1/4” NPTFinlet and outlet.
AccuracyThe measuring cylinder system has a consistantaccuracy rate of + 2%, depending on materialcharacteristics.
Suggested System Components• Aro Pump• Flow Gun (Dispensing Valve)• Airline Filter, Regulator, Lubricator
• Measuring Cylinder - see below for details• 4-way Control Valve - see below for details
Ordering
665008
Select fromthis catalog. Filter/Regulator/Lubricator
Flow Gun (Dispensing Valve)
4-Way Control Valve
Measuring Cylinder
Pump Assembly
Air Inlet
43688.qxd 2/8/06 9:32 AM Page 24
22 | Extrusion Accessories • Automatic and Manual Guns
Outlet WorkingModel Pumps Port Pressure
Number Description Used With Size PSI (Bar)
*651511 Flow Gun - Requires 5000 3/8 .250 (6) & (2) 50 (3.4)4-way air valve to open (345) NPT 11/16-16 1/8 F at 2000and close. Adjusting (F) (2) (M) PSIscrew varies stroke length. (138 bar)Secures to 1/2” diameter fluidrod by allen screw. Aluminum pressurebody with tungsten carbideseats. Order 66541-XX Extrusion Nozzle Kit separately.
651513-11-B Flow Gun - Has air 5000 1/4 .093 (2.3) 1/8 50 (3.4)open, spring return (345) NPS & 11/16-16 (F) at 2000actuator. Requires (M) (M) PSI 3-way air valve to open. (138 bar)Adjusting screw varies fluidstroke length. Secures pressureto 1/2” diameter rod by allenscrew. 316 stainless steelwith tungsten carbide seat. Order 66541-XX Extrusion Nozzle Kit separately.
651536-1 Snuff-Back Gun - High 5000 3/8 1/4 (2)flow automatic dispensing (345) NPT NPT 1/8gun is designed to handle (F) (F) NPT (F)high-viscosity materials. (2)Requires a 4-way air valveto open and close.
651537-1 Flow Gun - Similar to 5000 3/8 3/8 (2) 50 (3.4)651511 except with carbon (345) NPT 18 (M) 1/8 at 2000steel body tungsten carbide. fluid pressureball and seat,
76751 Adapter - 1/4NPT(M) to 11/16-16(M) adapts 66541-XX Extrusion NozzleKit to fluid outlet for 641523-1 Flow Gun.
66541-XX Extrusion Nozzle Kit - Used on manual or automatic extrusion guns.Hardened steel assembly includes nozzle and cap. 11/16-16 UN(F).
66541-3 .031 66541-9 .093 66541-17 .17266541-4 .046 66541-12 .125 66541-18 .18766541-6 .063 66541-15 .156 66541-25 .250
66541-37 .375
Model Orifice Model Orifice Model OrificeNumber Diameter Number Diameter Number Diameter
651511
651513
66541-XX
Automatic Extrusion Guns
Extrusion Gun Nozzle Kits
*WARNING: Do not use with halogenated hydrocarbons. Thismodel contains aluminum parts that come incontact with the material being dispensed.Aluminum is not compatible with halogenatedhydrocarbon solvents.
Max Fluid Fluid Fluid OutletModel Pressure Inlet I.D. & Thread
Number Description PSI (bar) In. In. (mm)*651500 Flow Gun - Aluminum body with 7500 3/8 (F) .250 (6) &
tungsten carbide seats. (517) 11/16-16 (M)Order 66541-XX Extrusion Nozzle Kit separately.
651533 Flow Gun - Wetted parts of 316 5000 1/4 .093 (2.3) &series stainless steel with tungsten (345) NPS(M) 11/16-16 (M)carbide seats.Order 66541-XX Extrusion Nozzle Kit separately.
641523-1 Flow Gun - Wetted parts of 300 3000 3/8 (F) .250 (6) &Series stainless steel with Teflon (207) 1/4 NPT(F)packings. Order 76751 Adapterand 66541-XX Extrusion Nozzle Kit separately.
*WARNING: Do not use with halogenated hydrocarbons. This model contains aluminum parts that come incontact with the material being dispensed. Aluminum is not compatible with halogenatedhydrocarbon solvents.
651500
641523-1(Shown with 66541-XX)
Manual Extrusion GunsUsed to extrude material over 200,000 CPS.
651533
43688.qxd 2/8/06 9:32 AM Page 25
2-1/4”
1-1/4”1-1/4”
®
Extrusion Accessories • Low-Profile Compact Dispensing Valves | 23
Features/Benefits
Spray Patterns
• Spray Valves for the Atomization of Low-Viscosity Fluids - These compact, air-operated, automatic spray valves provide air-atomized application of low-viscosityfluids. They are designed to be used with either supply pumps or pressure tanks.Several unique design features seal the material from outside air and moisture andprevent premature curing of material. This allows for either continuous or intermittentuse and reduces the need for daily cleanup.
• Unique Spray Patterns Matched to Application Requirements - To meet the needsof your individual application, both flat and round spray patterns are available. For widesurface coverage with minimum film thickness, flat spray models are available in both90° and 45° spray patterns. For a more focused pattern, with a thicker film build, or aconical substrate, the round spray models are the appropriate choice.
• Compact Design Provides Mounting Versatility - The narrow dimensions, blockshape and hose placement allows installation in narrow, recessed areas. Multiplevalves can be grouped together n an area normally occupied by a single conventionalspray valve.
• Extrusion Valves for Precise Applications of Bead Patterns - For applications thatrequire a precise bead of material, rather than a sprayed coating, several models ofextrusion valves are available. Like the spray valves, separate air pressure andmaterial flow adjustments provide regulation of emissions for material savings andprecise, accurate patterns.
Multiple valves can be grouped together to achieve a multiple bead pattern.
FLAT SPRAY FLAT SPRAY90° PATTERN 45° PATTERN
Material Control AtomizingPressure Air AirPSI (bar) PSI (bar) PSI (bar)
Material Control AtomizingPressure Air AirPSI (bar) PSI (bar) PSI (bar)
15 (1) 55 (3.7) 20 (1.3)30 (2) 90 (6.2) 35 (2.4)
15 (1) 55 (3.7) 20 (1.3)30 (2) 90 (6.2) 35 (2.4)
407442-8
407442-8-42”
1”5/8”
5/8”
1-1/4”
1-1/4”
®
2”
1-1/4”2-1/4”
3/4”3/4”
1/2”
®
1”
43688.qxd 2/8/06 9:32 AM Page 26
RecommendedMinimum Maximum Range
Atomizing Control Control Fluid AtomizingTip Fluid Air Air Air Operating Air
Diameter Inlet Inlet Inlet Required Pressure PressureModel (mm) NPT (M) NPT (M) NPT (M) PSI (bar) PSI (bar) PSI (bar)
407442-8 0.8 1/4 1/4 1/8 55 (3.7) 180 (12) 7.5-37.5 (.5-2.5)407442-10 1.0 1/4 1/4 1/8 55 (3.7) 180 (12) 7.5-37.5 (.5-2.5)407442-15 1.5 1/4 1/4 1/8 55 (3.7) 180 (12) 7.5-37.5 (.5-2.5)
407444-3 0.3 1/4 1/4 1/4 90 (6) 1000 (69) None Required407444-5 0.5 1/4 1/4 1/4 90 (6) 1000 (69) None Required407444-7 0.7 1/4 1/4 1/4 90 (6) 1000 (69) None Required
407442-8-4 0.8 1/4 1/4 1/8 55 (3.7) 180 (12) 7.5-37.5 (.5-2.5)407442-10-4 1.0 1/4 1/4 1/8 55 (3.7) 180 (12) 7.5-37.5 (.5-2.5)407442-15-4 1.5 1/4 1/4 1/8 55 (3.7) 180 (12) 7.5-37.5 (.5-2.5)
407443-8 .08 1/4 1/4 1/8 90 (6) 90 (6) 7.3-37.5 (.5-2.5)407443-12 1.2 1/4 1/4 1/8 90 (6) 90 (6) 7.3-37.5 (.5-2.5)407443-20 2.0 1/4 1/4 1/8 90 (6) 90 (6) 7.3-37.5 (.5-2.5)
407441-8 .08 1/4 1/4 1/8 55 (3.7) 180 (12) 7.3-37.5 (.5-2.5)407441-10 1.0 1/4 1/4 1/8 55 (3.7) 180 (12) 7.3-37.5 (.5-2.5)407441-15 1.5 1/4 1/4 1/8 55 (3.7) 180 (12) 7.3-37.5 (.5-2.5)
Material Control AtomizingPressure Air AirPSI (bar) PSI (bar) PSI (bar)
Material Control AtomizingPressure Air AirPSI (bar) PSI (bar) PSI (bar)
15 (1) 55 (3.7) 20 (1.3)30 (2) 90 (6.2) 35 (2.4)
15 (1) 100 (6.9) 60 (4)30 (2) 100 (6.9) 20 (1.3)
®
®
1”
5/8”
1/2” 2”
1-1/4”
1”
1”
2”
1/2”
1/4”
3/4”
3/8”
24 | Extrusion Accessories • Low-Profile Compact Dispensing Valves
Spray Patterns
Flat Spray, 90° Pattern
Flat Spray, 45° Pattern
Round Spray, Focused Pattern
Round Spray, Diffused Pattern
Extrusion Valve
Round SprayDiffused Pattern
Round SprayFocused Pattern
407441-8
407444-3
407443-8
43688.qxd 2/8/06 9:32 AM Page 27
Extrusion Accessories • Material Filters and Swivels | 25
Swivels are used to give mobility and flexibility for material hoses and dispensing guns.Select the proper working pressure and check the compatibility of the seals with thematerial being pumped.
Model Thread Size Type Max. WorkingNumber In. NPT x NPT of Seals Pressure PSI (bar)
straight
“Z”636077 1/8 (M) x 1/8 (F) Fabric with Neoprene 8,000 (552)636088 3/8 (M) x 3/8 (F) Fabric with Neoprene 8,000 (552)635106 1/2 (F) x 3/8 (M) Fabric with Neoprene 8,000 (552)636087-B* 1/4-18 NPT (F) x 1/4-18 NPT (M) Fabric with Neoprene 5,000 (345)636086-B 1/4-18 NPT (F) x 1/4-18 NPT (M) Fabric with Neoprene 5,000 (345)* Includes internally mounted element
636075 1/8 (M) x 1/8 (F) Fabric with Neoprene 8,000 (552)636085 3/8 (M) x 3/8 (F) Fabric with Neoprene 8,000 (552)635117 1/2 (M) x 1/2 (F) Fabric with Neoprene 8,000 (552)635108 3/4 (M) x 3/4 (F) Fabric with Neoprene 1,000 (69)
Swivels
636075
636075
651418-40-B 6,000 (414) 40 375 1-F (2) 3/8-F (3)651418-70-B 6,000 (414) 70 200 1-F (2) 3/8-F (3)651418-100-B 6,000 (414) 100 149 1-F (2) 3/8-F (3)
Maximum Fluid Filter FilterModel Pressure Filter Inlet(s) Size Outlet(s) Size
Number PSI (Bar) Mesh Microns (Qty) NPT (Qty) NPT1/4” fluid inlet/carbon steel construction
651412 5,000 (345) 70 200 1/4-F (2) 1/4-F (3) Bottom swivel651412-8 5,000 (345) 100 149 1/4-F (2) 1/4-F (3)
1/2” fluid inlet/stainless steel construction (passivated)651422-40 6,000 (414) 40 375 1/2-F (2) 1/2-F (1)651422-70 6,000 (414) 70 200 1/2-F (2) 1/2-F (1)651422-100 6,000 (414) 100 149 1/2-F (2) 1/2-F (1)
1/2” fluid inlet/carbon steel construction (e-nickel plated)651420-40 6,000 (414) 40 375 1/2-F (2) 1/2-F (1)651420-70 6,000 (414) 70 200 1/2-F (2) 1/2-F (1)651420-100 6,000 (414) 100 149 1/2-F (2) 1/2-F (1)651421-70 6,000 (414) Dual Screens 1-8 3/4-F (1)
1” fluid inlet/carbon steel construction (e-nickel plated)651418-XX-B
651420-XX-B
651412-X
Material Filters
43688.qxd 2/8/06 9:32 AM Page 28
26 | Extrusion Accessories • Air Treatment
MODULE/AIR 2000™ F/R/LC28241-810 Filter/Regulator/Lubricator 41⁄4” & 1/2 (F) 5-125 110 SCFM
Drop/fog-type lubrication, 6” air (.3-8.6) (52 dm3/s)40 micron filter, motormetal bowls w/ sight glass. pumps
P29241-610 Filter/Regulator 41⁄4” & 6” 1/2 (F) 6-125 140 SCFMDrop/fog-type lubrication, air motors (.3-8.5) (66 dm3/s)40 micron filter,metal bowls w/ sight glass.
MODULE/AIR 1000™ F/R/LC28121-800 Filter/Regulator/Lubricator 2” & 3”, 1/4 (F) 5-125 13 SCFM
Drop/fog-type lubrication, air motor (.3-8.6) (6 dm3/s)20 micron filter, pumpspolycarbonate bowl w/guard.
P29122-600 Filter/Regulator 2” & “N”, 1/4 (F) 5-125 12 SCFMDrop/fog-type lubrication, air motors (.3-8.5) (6 dm3/s)20 micron filter,polycarbonate bowl w/guard.
Pumps Port Reg. Pressure Max.Model Used Size Range Flow
Number Description With NPT PSI (bar) Pressure
HEAVY DUTY F/R/L28353 Filter/Regulator/Lubricator 8”, 10” 3/4 (F) 5-125 75 SCFM
Drop/fog-type lubrication, & 12” (.3-8.6) (35 dm3/s)40 micron filter, air motorpolycarbonate bowl w/guard. pumps
F/R/L Assemblies651729 Kit Assembly 10” 3/4 (M) 5-125 75 SCFM
Heavy-Duty FRL w/ hose & 12” (.3-8.6) (35 dm3/s)& mounting bracket for air motorinstallation to Two Post pumpsRam.
651730 Kit Assembly 8” 3/4 (M) 5-125 75 SCFMHeavy-Duty FRL w/ hose air motor (.3-8.6) (35 dm3/s)& mounting bracket for pumpsinstallation to Two Post Ram.
65940 Kit Assembly 41⁄4” & 1/2 (M) 5-200 65 SCFMHeavy-Duty FRL w/ hose 6” air (.3-13.8) (31 dm3/s)& mounting bracket for motorinstallation to Two Post pumpsRam.
C28121-800
28353
62274 One Quart Bottle - A high quality “EP” extreme pressure gear oil, non-detergent, rust or oxidation inhibited, with a viscosity of 700-1000 S.U.S. at100° F.
P29122-600
C28241-810
P29241-610
Air Filter/Regulator/Lubricator
Air Line Lubricant
43688.qxd 2/8/06 9:32 AM Page 29
Extrusion Accessories • Pump Actuation/Air Controls | 27
Air Control Needle Valves
2-Way Solenoid/Pilot Acting Valves
2-Way Direct Acting Solenoid Valves
• Meets OSHA lock-out/ tag-out regulations
• Installs upstream ofair filter / regulatorunit
Lock-Out Valves/Hasp
• Normally Closed• Brass Body• Stainless Steel Steel • Spring Return• Connector Option Include
CSN-30 or CHW-30
3-Way Solenoid Actuated Valves
• Normally Closed• Brass Body• Stainless Steel Stem• Spring Return• Connector Options include
CSN-30 or CHW-30,exception 1/4”valve whichuses CSN or CHW.
• Normally Closed• Aluminum Body• Spring Return• Connector Options include
CSN-30 or CHW-30 forCAT66-P, or CSN or CHWfor all others
• Composite Body• Can be Panel Mounted• Infinite Control Settings• Corrosion-Resistant Stainless
Steel Insert & Stem
Pump Type/Size
104104-NO2
CAT66P MQ3728
H253SS
MQ3729
104174
100085
Note: See Page 28 for cable connectors.
Note: See Page 28 for cable connectors.
Note: See Page 28 for cable connectors
TB03EB-024-D 3/8” 4.5 24 DC • •TB03EB-120-A 3/8” 4.5 120 AC • •TB04EB-024-D 1/2” 4.5 24 DC • •TB04EB-120-A 1/2” 4.5 120 AC • •TB06EB-024-D 3/4” 12.0 24 DC • • •TB06EB-120-A 3/4” 12.0 120 AC • • •
Model Port Voltage 2” 3” 4-1/4” 6” 8” 10” 12”Number Size Cv
TB022B-024-D 1/4” .18 24 DC •TB022B-120-A 1/4” .18 120 AC •TB035B-024-D 3/8” 4.0 24 DC • • •TB035B-120-A 3/8” 4.0 120 AC • • •TB045B-024-D 1/2” 4.0 24 DC • •TB045B-120-A 1/2” 4.0 120 AC • •TB066B-024-D 3/4” 8.6 24 DC • • •TB066B-120-A 3/4” 8.6 120 AC • • •
Model Port Voltage 2” 3” 4-1/4” 6” 8” 10” 12”Number Size Cv
CAT66P-024-D 1/4” .2 24 DC •CAT66P-120-A 1/4” .2 120 AC •MQ3728-024-D 1/4” 1.5 24 DC •MQ3728-120-A 1/4” 1.5 120 AC •H253SS-024-D 3/8” 2.2 24 DC • •H253SS-120-A 3/8” 2.2 120 AC • •H254SS-024-D 1/2” 2.4 24 DC • •H254SS-120-A 1/2” 2.4 120 AC • •MQ3729-024-D 3/4” 7.5 24 DC • • •MQ3729-120-A 3/4” 7.5 120 AC • • •
Model Port Voltage 2” 3” 4-1/4” 6” 8” 10” 12”Number Size Cv
104104-NS2 1/4” • •104104-N02 1/4” • •104104-N04 1/2” 4.5 • •104104-N06 3/4” 4.5 • • •
Model Port 2” 3” 4-1/4” 6” 8” 10” 12”Number Size Cv
104253-2* 1/4” •104174-2 1/4” • •104174-4 1/2” • •100085 (Hasp) 1/2” • • • • • • •
Model Port 2” 3” 4-1/4” 6” 8” 10” 12”Number Size
* Safety lock-out for Module-Air 1000
43688.qxd 2/8/06 9:32 AM Page 30
28 | Extrusion Accessories • Pump Actuation/Air Controls
aTypical Installation
Module Air 2000Filter / Regulator
Lock-out Valve with Hasp
Solenoid-Actuated Valve Solenoid-Actuated Valve
AirNeedleValve
AirNeedle
Valve
Air lineConnectionKit
Air lineConnection
Kit
ARO Diaphragm Pump
ARO Piston Pump
Model Description Model Description116218-39 22 mm, 24 VDC Coil116218-33 22 mm, 120 VAC Coil119378-39 30 mm, 24 VDC Coil119378-33 30 mm, 120 VAC Coil
CSN Strain relief connector for 3-way valvesCSN-30 Strain relief connector for 2-way valves and CAT66P-XXX-X ValvesCHW Molded cable connector for 3-way valves, 36” molded leadsCHW-30 Molded cable connector for 2-way valves and CAT66P-XXX-X, 36”
molded leads
Connectors Coils
CHW-30CSN-30
43688.qxd 2/8/06 9:32 AM Page 31
Extrusion Accessories • Over-Run Controls, Mufflers | 29
Pumps Air Air PressureModel Used Inlet Outlet Range
Number Description With NPT NPT PSI (bar)
635040 ARO-STOP® Valve “N” Series, 1/4 (F) 1/4 (M) 20-175Shuts off air to the pump air motor (1.4-12)when material container is pumpsempty or line is broken. onlyQuick set and reset feature.
23644-400 ARO-STOP® Valve 41⁄4” & 1/2 (F) 1/2 (M) 20-175Shuts off air to the pump 6” air (1.4-12)when material container is motorempty or line is broken. pumpsQuick set and reset feature.
635043 ARO-STOP® Valve 8’, 10” 3/4 (F) 3/4 (M) 20-175Shuts off air to the pump & 12” (1.4-12)when material container is air motorempty or line is broken. pumpsQuick set and reset feature. only
635040
Pump Air SizeModel Used Inlet Inches X Inches
Number Description With NPT PSI (bar)
91790 Air Motor Muffler 41⁄4” & 6” 1-1/4 (M) 3-1/2 x 11-3/16Reduces air exhaust noise level air motor (89 x 284)to acceptable OSHA standards. pumps
92460 Air Motor Muffler 8” air motor, 1-1/4 (M) 5-5/8 x 15-3/8Reduces air exhaust noise level pumps (143 x 391)to acceptable OSHA standards.
66718 Air Motor Muffler 10” & 12” Bolted-on 9 x 20Reduces air exhaust noise level air motor, (229 x 508)to acceptable OSHA standards. pumps
667189246091790
66333-B Wet Sol - One Quart Container All pumps with wet cups.Designed to prolong packing life by keepingthe piston rod and packings wetted. Alsoreduces the possibility of material hardeningon the piston rod.
66334-B Wet Sol - One Gallon Container
Model UsedNumber Description With
Over-Run Controls
66334-B
Wet Sol “Plus”
Air Motor Muffler
43688.qxd 2/8/06 9:32 AM Page 32
30 | Extrusion Accessories • Hose
The material characteristic chart below indicates what type of hose material is recommended for specific fluids. The charts of the following two pages listthe fluid hoses in order of use, size, tube and cover materials, and maximum working pressure. In selecting the proper hose, be sure the hose materialand fluid is compatible and that the maximum working pressure won’t be exceeded in the application.
Standard length hoses, which are a stock item ready for shipment, are listed in the “available length” column of the selection chart.
HoseMaterial Characteristics Recommended For Not Recommended For
Buna N Buna N is highly resistant to petroleum base oils Ammonia solutions Acetate Solventsand many cleaners. Hoses incorporating a Buna N Petroleum oils and fluids Ketones (MEK, Acetone)tube make excellent air hoses when lubrication is Water Strong acidsrequired in the air line. Silicone greases and oils Ozone
Di-ester base lubricants Automatic Brake fluidEthylene glycol base fluids BenzeneAbrasive material Carbon DisulfideCorn oil Ethylene ChlorideEthylene AlcoholSoap solution
GRS GRS (Government Rubber Styrene) has superior wear Automatic brake fluid Ozonecharacteristics. With high tensile properties and good Alcohols Petroleum oilabrasion and moisture resistance, it makes a fine air hose. Water Many chemicals
Abrasive material
Polysulfide Thiokol is highly resistant to most paint solvents, thereby Automatic brake fluid Ozone(Thiokol) lending itself for use as a flexible supply line for carrying Alcohols Heat
paint, latex materials, gasoline, and oil. Ozone Phosphate ester base hydraulicNon-oxidizing acids fluidsOil Abrasive materialKetones (MEK, Acetone) Freon
Neoprene Neoprene has very good resistance to ozone, sunlight, Refrigerants (Freons) Phosphate ester fluidsand oxidation. It also performs well in contact with oils, Petroleum oil Ketones (MEK, Acetone)is heat and flame-resistant and has good tensile strength Mild acids Benzeneand resilience. Neoprene is considered to be an excellent Silicate ester lubricantshose covering. Abrasive material
Calcium Chloride
Nylon Nylon is tough, retains its shape at elevated temperatures, Lubricating oils and grease Stong acidsand is highly resistant to abrasion and to the effects of Aliphatic and Aromatic hydro-carbons RTVmost chemicals. It is unaffected by oil and enamel Common esters Creosoteor lacquer solvents when used as a fluid supply hose. Ketones Oxidizing Agents
EthersAlkaliesAbrasive MaterialBenzeneButyl AlcoholCarbon Tetrachloride
For further hose material compatibility consult Aro’s Material Compatibility Guide, Form # 8677-P.
How to Order Hose
43688.qxd 2/8/06 9:32 AM Page 33
Air & Fluid Hose / Low Pressure
Extrusion Accessories • Hose | 31
StandardHose Materials Lengths PSI
Model Fitting Thread Sizes Tube Cover Feet (bar)
621501-XXX 1/2 NPT(M) x 1/2 NPT(M) GRS GRS 5 125 (9)
622201-XXX 1/4 NPT(M) x 1/4 NPT(M) Buna N Neoprene 3, 5, 10, 25 250 (17)622204-XXX 1/4 NPT(M) x 1/4 NPTSM(FSN) Buna N Neoprene 5, 25 250 (17)
622651-XXX 3/4 NPT(M) x 3/4 NPT(M) Neoprene Neoprene 5, 10, 15 600 (41)
622581-6 1/2 NPT(M) x 1/2 NPT(M) Thiokol Neoprene 6 200 (14)
622681-6 3/4 NPT(M) x 3/4 NPT(M) Thiokol Neoprene 6 200 (14)
1/2” I.D., 27/32” O.D., 1 fabric braid
1/4”, 5/8” O.D., 2 fabric braid
3/4” I.D., 1-3/16” O.D., 2 fabric braid
1/2”, 11/16” O.D., 2 fabric wire braid
3/8”, 5/8” O.D., 2 nylon w/static wire braid
1/4” I.D., 1/2” O.D., conductive polymer
1/2”, 51/64” O.D., 2 spiral, 1 wire braid
3/8” I.D., 11/16” O.D., polyester braid
1/2” I.D., 13/16” O.D., polyester braid
3/4”, 1-1/4” O.D., 2 fabric braid
Fluid Hose / Medium Pressure
RTV/Moisture Lok™ Hose
Fluid Hose / Low Pressure
628014-XXX-X 3/8 NPT(M) x 3/8 NPT(M) Nylon Polyurethane 15 2250 (155)
628042-XXX-X 1/4 NPSM(FSN) x 1/4 NPSM(FSN) Nylon Nylon 25, 30, 50 3000(207)
628055-XXX-X 1/2 NPSM(F) x 1/2 NPSM(F) Nylon Polyurethane 25 4500 (310)
628081-XXX 3/8 NPT(M) x 3/8 NPT(M) Polymer Polyurethane 10, 15, 25 2250 (190)
628084-XXX 1/2 NPT(M) x 1/2 NPT(M) Polymer Polyurethane 5, 10, 15, 25 2000 (138)
43688.qxd 2/8/06 9:32 AM Page 34
Fluid Viscosity
Air Pressure at Pump
Distance to Dispensing Point (Plumbing Length)
Flow Requirements (in gallons Per Minute)
Container Size
Calculate Pressure Drop (∆P)
∆P* (Viscosity x Plumbing Length x Flow x .000245) ÷ (Plumbing I.D.)4
Calculate Required pump Ratio
∆P ÷ Air Pressure at Pump * Pump Ratio Required
• Final SelectionIs a pre-assembled A.S.A.P. package available?Will system be made up of components ordered individually?
Determine Ratio:
Pump Selection:
Select Accessories:
Basic Data:
32 | Picking the Right ARO Pump
• Dispensing Gun• I.D.L. Fluid Regulator• Follower Plate & Seal• Control Valves to Operate Pump• Airline Filter-Regulator-Lubricator• Air Motor Muffler• Ram / Lift / Pedestal-Mount / Wall-Mount• Wet-Sol / Airline Oil
43688.qxd 2/8/06 9:32 AM Page 35
4-1/4”, 9:1, 2-Ball (Stub) • Piston Pumps | 33
Air Inlet Pressure Range. . . . . . 30 - 120 PSI (2 - 8.3 bar)
Fluid Pressure Range . . . . . . . . 270 - 1350 PSI (18.3 - 91.8 bar)
Max. Rec’d Cycles Per Minute . 60
Displacement Per Cycle . . . . . . 11 in3 (180.2 cm3)
Cycles Per Gallon (Liter) . . . . . . 21 (5.5)
Flow @ 60 Cycles / Minute . . . . 2.9 GPM (10.8 lpm)
Noise Level @ 60 Psi. . . . . . . . . 80 db(A)
6 5 0 4 0 8 - X - B
Lower Pump Material . . . . . . . . 316 Stainless Steel
Plunger Material. . . . . . . . . . . . . 316 Stainless Steel
Cylinder Material . . . . . . . . . . . . Stainless Steel
Air Motor. . . . . . . . . . . . . . . . . . . 65444-B
Motor Repair Kit . . . . . . . . . . . 61268
Motor Diameter . . . . . . . . . . . . 4-1/4”
Stroke . . . . . . . . . . . . . . . . . . . . 4”
Air Inlet . . . . . . . . . . . . . . . . . . . 1/2” NPT(F)
Lower Pump Model . . . . . . . . . . 65108/65108-X
Lower Pump Repair Kit. . . . . . 637010 for 650408-B/650408-5-B
637010-4 for 650408-4-B/650408-6-B
Material Inlet. . . . . . . . . . . . . . . . 1-1/4” NPT(F)
Material Outlet . . . . . . . . . . . . . . 3/4” NPT(F)
Weight . . . . . . . . . . . . . . . . . . . . . 35 lbs. (15.8 kgs.)
Air F/R/L: C28241-810Wall Mount: 66100Airline Oil: 62274Muffler: 91790Wet Sol: 66333-B
Packings4 : UHMW-PE (Upper & Lower)5 : Teflon, w/Ultra Coated Tube and
Rod (Upper & Lower)6 : UHMW-PE, w/Ultra Coated Tube
and Rod (Upper & Lower)
9.7(246.8 mm)
31.6(803.2 mm)
Pump Performance
Pump Specifications
AccessoriesOrdering
650408-B650408-X-B
C O AT I N G ™
6 5 0 4 0 8 - B Packings: Teflon (Upper & Lower)
43688.qxd 2/8/06 9:32 AM Page 36
34 | 4-1/4”, 9:1, 2-Ball (55-Gallon) • Piston Pumps
Air Inlet Pressure Range. . . . . . 30 - 120 PSI (2 - 8.3 bar)
Fluid Pressure Range . . . . . . . . 270 - 1350 PSI (18.3 - 91.8 bar)
Max. Rec’d Cycles Per Minute . 75
Displacement Per Cycle . . . . . . 11 in3 (180.2 cm3)
Cycles Per Gallon (Liter) . . . . . . 21 (5.5)
Flow @ 60 Cycles / Minute . . . . 2.8 GPM (10.5 lpm)
Noise Level @ 60 Psi. . . . . . . . . 80 db(A)
Lower Pump Material . . . . . . . . 316 Stainless Steel
Plunger Material. . . . . . . . . . . . . 316 Stainless Steel
Cylinder Material . . . . . . . . . . . . Stainless Steel
Air Motor. . . . . . . . . . . . . . . . . . . 65444-B
Motor Repair Kit . . . . . . . . . . . 61268
Motor Diameter . . . . . . . . . . . . 4-1/4”
Stroke . . . . . . . . . . . . . . . . . . . . 4”
Air Inlet . . . . . . . . . . . . . . . . . . . 1/2” NPT(F)
Lower Pump Model . . . . . . . . . . 65106 for 650409
65106-4 for 650409-4
Lower Pump Repair Kit. . . . . . 637010 for 650409
637010-4 for 650409-4
Material Inlet. . . . . . . . . . . . . . . . 1-1/4” NPSM(F)
Material Outlet . . . . . . . . . . . . . . 3/4” NPT(F)
Weight . . . . . . . . . . . . . . . . . . . . . 45 lbs. (203 kgs.)
Air F/R/L: C28241-810Wall Mount: 66100Airline Oil: 62274Muffler: 91790Wet Sol: 66333-B
55.3(1405 mm)
33.2(844.5 mm)
6 5 0 4 0 9 - X
Packings4 : UHMW-PE (Upper & Lower)
Pump Performance
Pump Specifications
AccessoriesOrdering
650409650409-4
6 5 0 4 0 9 Packings: Teflon (Upper & Lower)
43688.qxd 2/8/06 9:32 AM Page 37
4-1/4”, 9:1, 2-Ball • Piston Pumps | 35
Air Inlet Pressure Range. . . . . . 30 - 120 PSI (2 - 8.3 bar)
Fluid Pressure Range . . . . . . . . 270 - 1350 PSI (18.3 - 91.8 bar)
Max. Rec’d Cycles Per Minute . 60
Displacement Per Cycle . . . . . . 11 in3 (180.2 cm3)
Cycles Per Gallon (Liter) . . . . . . 21 (5.5)
Flow @ 60 Cycles / Minute . . . . 2.8 GPM (10.5 lpm)
Noise Level @ 60 Psi. . . . . . . . . 80 db(A)
Lower Pump Material . . . . . . . . Carbon SteelPlunger Material. . . . . . . . . . . . . Carbon Steel (Hard Chrome)Cylinder Material . . . . . . . . . . . . Carbon SteelAir Motor. . . . . . . . . . . . . . . . . . . 65445-B
Motor Repair Kit . . . . . . . . . . . 61268Motor Diameter . . . . . . . . . . . . 4-1/4”Stroke . . . . . . . . . . . . . . . . . . . . 4”Air Inlet . . . . . . . . . . . . . . . . . . . 1/2” NPT(F)
Lower Pump Model . . . . . . . . . . 650453-XLower Pump Repair Kit. . . . . . 637177 for 650453-5Order parts separately for . . . 650453-7, -8, -9
Material Inlet. . . . . . . . . . . . . . . . 1-1/2”NPT for 650453-7/650453-9Immersed for 650453-5/650453-8
Material Outlet. . . . . . . . . . . . . . . . . . . . . . . . . 3/4” NPT(F)Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35 lbs. (15.8 kgs.) for 650453-7/650453-9
49 lbs. (22.2 kgs.) for 650453-5/650453-8
Air F/R/L: C28241-810Wall Mount: 66100Airline Oil: 62274Muffler: 91790Wet Sol: 66333-B
6 5 0 4 5 3 - X
Type Packings7 : Stub (Wall Mount) Leather/Teflon5 : 55-Gallon (205 Liters) Teflon9 : Stub (Wall Mount) UHMW-PE/Leather8 : 55-Gallon (205 Liters) UHMW-PE
32.6(828 mm)
59.5(1511 mm) 37.1
(942 mm)
10.5(266.7mm)
Pump Performance
Pump Specifications
AccessoriesOrdering
650453-X
STUB55-Gallon
43688.qxd 2/8/06 9:32 AM Page 38
36 | 8”, 10:1, 2-Ball • Piston Pumps
PackingsC6 : UHMW-PEK3 : CG-Filled Teflon with, Buna N EnergizerL6 : Mineral-Filled TeflonP6 : UHMW-PE/Teflon StaggeredR6 : Teflon/UHMW-PE Staggered
Air Inlet Pressure Range. . . . . . 30 - 120 PSI (2 - 8.3 bar)
Fluid Pressure Range . . . . . . . . 300 - 1200 PSI (20.4 - 81.6 bar)
Max. Rec’d Cycles Per Minute . 60
Displacement Per Cycle . . . . . . 59.9 in3 (981.5 cm3)
Cycles Per Gallon (Liter) . . . . . . 3.8 (1.0)
Flow @ 60 Cycles / Minute . . . . 15 GPM (56.7 lpm)
Noise Level @ 60 Psi. . . . . . . . . 88 db(A) w/muffler
6 1 3 1 1 2 - X X F - C
Lower Pump Material . . . . . . . . 300 Stainless Steel
Plunger Material. . . . . . . . . . . . . 304 Stainless Steel (Hard Chrome)
Cylinder Material . . . . . . . . . . . . 304 Stainless Steel (Hard Chrome)
Air Motor. . . . . . . . . . . . . . . . . . . 66523-B
Motor Repair Kit . . . . . . . . . . . 66614
Motor Diameter . . . . . . . . . . . . 8”
Stroke . . . . . . . . . . . . . . . . . . . . 6”
Air Inlet . . . . . . . . . . . . . . . . . . . 3/4” NPT(F)
Lower Pump Model . . . . . . . . . . 66942-XXF
Lower Pump Repair Kit. . . . . . 637211-XXX
Material Inlet. . . . . . . . . . . . . . . . 2” NPTF-1
Material Outlet . . . . . . . . . . . . . . 1-1/4” NPTF-(f)
Weight . . . . . . . . . . . . . . . . . . . . . 102 lbs. (46.3 kgs.)
46.1(1172.3 mm)
25.2(640.5 mm)
14.6(372.2 mm)
Pump Performance
Pump Specifications
AccessoriesOrdering
613112-XXF-C
Reference Mounting Footprint “A”for related rams/accessories
Air F/R/L: 28353Wall Mount: 66542Mounting Post: 67187-1Airline Oil: 62274Muffler: 92460Wet Sol: 66333-BFloor/Follower Adpt. 67136
43688.qxd 2/8/06 9:32 AM Page 39
8”, 10:1, 2-Ball • Piston Pumps | 37
Air Inlet Pressure Range. . . . . . 30 - 120 PSI (2 - 8.3 bar)
Fluid Pressure Range . . . . . . . . 300 - 1200 PSI (20.4 - 81.6 bar)
Max. Rec’d Cycles Per Minute . 60
Displacement Per Cycle . . . . . . 59.9 in3 (981.5 cm3)
Cycles Per Gallon (Liter) . . . . . . 3.8 (1.0)
Flow @ 60 Cycles / Minute . . . . 15 GPM (56.7 lpm)
Noise Level @ 60 Psi. . . . . . . . . 88 db(A) w/muffler
6 5 0 8 6 6 - X 6 D - B
Lower Pump Material . . . . . . . . 400 Stainless Steel
Plunger Material. . . . . . . . . . . . . 15-5 Stainless Steel (Hard Chrome)
Cylinder Material . . . . . . . . . . . . 15-5 Stainless Steel (Hard Chrome)
Air Motor. . . . . . . . . . . . . . . . . . . 66523-B
Motor Repair Kit . . . . . . . . . . . 66614
Motor Diameter . . . . . . . . . . . . 8”
Stroke . . . . . . . . . . . . . . . . . . . . 6”
Air Inlet . . . . . . . . . . . . . . . . . . . 3/4” NPT(F)
Lower Pump Model . . . . . . . . . . 66941-X6D
Lower Pump Repair Kit. . . . . . 637211-XXX
Material Inlet. . . . . . . . . . . . . . . . 2” NPT(M)
Material Outlet . . . . . . . . . . . . . . 1-1/4” NPT(F)
Weight . . . . . . . . . . . . . . . . . . . . . 102 lbs. (46.3 kgs.)
Reference Mounting Footprint “A”for related rams/accessories
Air F/R/L: 28353Wall Mount: 66542Mounting Post: 67187-1Airline Oil: 62274Muffler: 92460Wet Sol: 66333-BFloor/Follower Adpt. 67136
PackingsC : UHMW-PEP : UHMW-PE/Teflon / StaggeredL : Mineral-Filled TeflonR : Teflon/UHMW-PE Staggered
46.1(1172.3 mm)
252.2(640.5 mm)
14.6(372 mm)
Pump Performance
Pump Specifications
Accessories
Ordering
650866-X6D-B
43688.qxd 2/8/06 9:32 AM Page 40
38 | 4-1/4”, 11:1, 2-Ball • Piston Pumps
Air Inlet Pressure Range. . . . . . 30 - 120 PSI (2 - 8.3 bar)
Fluid Pressure Range . . . . . . . . 330 - 1650 PSI (22.4 - 112.2 bar)
Max. Rec’d Cycles Per Minute . 60
Displacement Per Cycle . . . . . . 14.5 in3 (237.6 cm3)
Cycles Per Gallon (Liter) . . . . . . 16 (4.2)
Flow @ 60 Cycles / Minute . . . . 3.7 GPM (13.9 lpm)
Noise Level @ 60 Psi. . . . . . . . . 81.8 db(A)
Lower Pump Material . . . . . . . . 300 Stainless Steel
Plunger Material. . . . . . . . . . . . . 17-4 Stainless Steel
Cylinder Material . . . . . . . . . . . . 316 Stainless Steel
Air Motor. . . . . . . . . . . . . . . . . . . 65465-B
Motor Repair Kit . . . . . . . . . . . 61268
Motor Diameter . . . . . . . . . . . . 4-1/4” (10.8 cm)
Stroke . . . . . . . . . . . . . . . . . . . . 6”
Air Inlet . . . . . . . . . . . . . . . . . . . 1/2”NPT(F)
Lower Pump Model . . . . . . . . . . 66300-X4X
Lower Pump Repair Kit. . . . . . 637305-X4X
Material Inlet. . . . . . . . . . . . . . . . 1” NPT(F) / 2” NPT(M)
Material Outlet . . . . . . . . . . . . . . 1” NPTF-1(F)
Weight . . . . . . . . . . . . . . . . . . . . . 42.9 lbs. (19.5 kgs.)
6 5 0 4 8 3 - X 4 XPackings Plungers3 : Teflon 3 : 17-4 Stainless Steel, C : UHMW-PE Hard Chrome PlatedG : UHMW-PE/Leather B : 17-4 Stainless Steel, P : UHMW-PE/Leather (Upper), “Ultra” Coated
UHMW-PE (Lower)R : Teflon/UHMW-PE (Upper), Teflon (Lower)
® C O AT I N G ™
12-11/16”(322 mm)
18-15/16”(481 mm)
39-3/4”(1009 mm)
650483-X4X
Pump Performance
Pump Specifications
AccessoriesOrderingReference Mounting Footprint “A” or “D”for related rams/accessories
Air F/R/L: C28241-810Airline Oil: 62274Air Motor Muffler: 91790Wet Sol: 66333-BWall Mount: 66101Floor/Follower Adpt. 67136 Floor Mount: 65138
43688.qxd 2/8/06 9:32 AM Page 41
10”, 15:1, 2-Ball • Piston Pumps | 39
Air Inlet Pressure Range. . . . . . 30 - 90 PSI (2 - 6.1 bar).
Fluid Pressure Range . . . . . . . . 1,350 PSI (91.8 bar) Max.
Max. Rec’d Cycles Per Minute . 60
Displacement Per Cycle . . . . . . 59.9 in3 (981.5 cm3)
Cycles Per Gallon (Liter) . . . . . . 3.8 (1.0)
Flow @ 60 Cycles / Minute . . . . 15 GPM (56.7 lpm)
Noise Level @ 60 Psi. . . . . . . . . 82 db(A) w/muffler
Reference Mounting Footprint “A”for related rams/accessories
Air F/R/L: 28353Wall Mount: 66542Airline Oil: 62274Muffler: 66718Wet Sol: 66333-BFloor/Follower Adpt. 67136
6 5 0 8 6 7 - X 6 D -BPackingsC : UHMW-PEL : Mineral-Filled TeflonP : UHMW-PE/Teflon (Upper), UHMW-PE (Lower)R : Teflon/UHMW-PE (Upper), Teflon (Lower)
45(1143 mm)
25.2(640.5 mm)
14.6(370.8 mm)
Lower Pump Material . . . . . . . . 400 Series Stainless Steel
Plunger Material. . . . . . . . . . . . . 15-5 Stainless Steel (Hard Chrome)
Cylinder Material . . . . . . . . . . . . 15-5 Stainless Steel (Hard Chrome)
Air Motor. . . . . . . . . . . . . . . . . . . 66651-B
Motor Repair Kit . . . . . . . . . . . 637110
Motor Diameter . . . . . . . . . . . . 10”
Stroke . . . . . . . . . . . . . . . . . . . . 6”
Air Inlet . . . . . . . . . . . . . . . . . . . 3/4” NPT(F)
Lower Pump Model . . . . . . . . . . 66941-X6D
Lower Pump Repair Kit. . . . . . 637211-XXX
Material Inlet. . . . . . . . . . . . . . . . 2” NPT(M)
Material Outlet . . . . . . . . . . . . . . 1-1/4” NPT(F)
Weight . . . . . . . . . . . . . . . . . . . . . 125 lbs. (56.8 kgs.)
Pump Performance
Pump Specifications
AccessoriesOrdering
650867-X6D-B
43688.qxd 2/8/06 9:33 AM Page 42
40 | 10”, 15:1, 2-Ball • Piston Pumps
Air Inlet Pressure Range. . . . . . 30 - 90 PSI (2 - 6.1 bar)
Fluid Pressure Range . . . . . . . . 3450 - 1,350 PSI (91.8 bar)
Max. Rec’d Cycles Per Minute . 60
Displacement Per Cycle . . . . . . 59.9 in3 (981.5 cm3)
Cycles Per Gallon (Liter) . . . . . . 3.8 (1.0)
Flow @ 60 Cycles / Minute . . . . 15 GPM (56.7 lpm)
Noise Level @ 60 Psi. . . . . . . . . 82 db(A) w/muffler
Lower Pump Material . . . . . . . . 300 Stainless Steel
Plunger Material. . . . . . . . . . . . . 304 Stainless Steel (Hard Chrome)
Cylinder Material . . . . . . . . . . . . 304 Stainless Steel (Hard Chrome)
Air Motor. . . . . . . . . . . . . . . . . . . 66651-B
Motor Repair Kit . . . . . . . . . . . 637110
Motor Diameter . . . . . . . . . . . . 10”
Stroke . . . . . . . . . . . . . . . . . . . . 6”
Air Inlet . . . . . . . . . . . . . . . . . . . 3/4” NPT(F)
Lower Pump Model . . . . . . . . . . 66942-XXF
Lower Pump Repair Kit. . . . . . 637211-XXX
Material Inlet. . . . . . . . . . . . . . . . 2” NPT(M)
Material Outlet . . . . . . . . . . . . . . 1-1/4” NPT(F)
Weight . . . . . . . . . . . . . . . . . . . . . 125 lbs. (56.8 kgs.)
6 1 3 1 2 3 - X X F - CPackingsC6 : UHMW-PEK3 : CG-Filled Teflon with, Buna N EnergizerL6 : Mineral-Filled TeflonP6 : UHMW-PE/Teflon (Upper), UHMW-PE (Lower)R6 : Teflon/UHMW-PE (Upper), Teflon (Lower)
14.6(372.2 mm)
45”(1144.5 mm)
25.2”(640.5 mm)
Pump Performance
Pump Specifications
Accessories
Ordering
613123-XXF-C
Reference Mounting Footprint “A”for related rams/accessories
Air F/R/L: 28353Wall Mount: 66542Airline Oil: 62274Muffler: 66718Wet Sol: 66333-BFloor/Follower Adpt. 67136
43688.qxd 2/8/06 9:33 AM Page 43
Air Inlet Pressure Range. . . . . . 30 - 120 PSI (2 - 8.3 bar)
Fluid Pressure Range . . . . . . . . 660 - 3300 PSI (44.8 - 224.4 bar)
Max. Rec’d Cycles Per Minute . 60
Displacement Per Cycle . . . . . . 7.5 in3 (122.9 cm3)
Cycles Per Gallon (Liter) . . . . . . 30.8 (8.1)
Flow @ 60 Cycles / Minute . . . . 1.9 GPM (7.2 lpm)
Noise Level @ 60 Psi. . . . . . . . . 81.8 db(A)
Lower Pump Material . . . . . . . . 300 Stainless Steel
Plunger Material. . . . . . . . . . . . . 17-4 Stainless Steel
Cylinder Material . . . . . . . . . . . . 316 Stainless Steel
Air Motor. . . . . . . . . . . . . . . . . . . 65465-B
Motor Repair Kit . . . . . . . . . . . 61268
Motor Diameter . . . . . . . . . . . . 4-1/4”
Stroke . . . . . . . . . . . . . . . . . . . . 6”
Air Inlet . . . . . . . . . . . . . . . . . . . 1/2” NPT(F)
Exhaust Port . . . . . . . . . . . . . . 1-1/4” NPT(F)
Lower Pump Model . . . . . . . . . . 66301-X4X
Lower Pump Repair Kit. . . . . . 637306-X43
Material Inlet. . . . . . . . . . . . . . . . 1” NPT(F) 2” NPT(M)
Material Outlet . . . . . . . . . . . . . . 1” NPT(F)
Weight . . . . . . . . . . . . . . . . . . . . . 42.9 lbs. (19.5 kgs.)
Reference Mounting Footprint “A” or “D”for related rams/accessories
Air F/R/L: C28241-810Airline Oil: 62274Air Motor Muffler: 91790Wet Sol: 66333-BWall Mount: 66101Floor/Follower Adpt. 66136 Floor Mount: 65138
39.8(1009 mm)
12-11/16(322 mm)
6 5 0 4 8 4 - X 4 XPackings3 : TeflonC : UHMW-PEG : UHMW-PE/Leather StaggeredP : UHMW-PE/Teflon Staggered (Upper),
UHMW-PE (Lower)R : Teflon/UHMW-PE Staggered (Upper),
Teflon (Lower)
Plungers3 : 17-4 S. S. Hard
Chrome PlatedB : 17-4 S.S. “Ultra”
Coated
18-15/16(481 mm)
®
C O AT I N G ™Pump Performance
Pump Specifications
AccessoriesOrdering
4-1/4”, 22:1, 2-Ball • Piston Pumps | 41
650484-X4X
43688.qxd 2/8/06 9:33 AM Page 44
Accessories
Air Inlet Pressure Range. . . . . . 30 - 120 PSI (2 - 8.3 bar)
Fluid Pressure Range . . . . . . . . 690 - 3450 PSI (46.9 - 234.6 bar)
Max. Rec’d Cycles Per Minute . 60
Displacement Per Cycle . . . . . . 14.5 in3 (237.6 cm3)
Cycles Per Gallon (Liter) . . . . . . 15.9 (4.2)
Flow @ 60 Cycles / Minute . . . . 3.7 GPM (13.9 lpm)
Noise Level @ 60 Psi. . . . . . . . . 84.8 db(A)
Lower Pump Material . . . . . . . . 300 Stainless Steel
Plunger Material. . . . . . . . . . . . . 17-4 Stainless Steel
Cylinder Material . . . . . . . . . . . . 316 Stainless Steel
Air Motor. . . . . . . . . . . . . . . . . . . 65665-B
Motor Repair Kit . . . . . . . . . . . 61355
Motor Diameter . . . . . . . . . . . . 6”
Stroke . . . . . . . . . . . . . . . . . . . . 6”
Air Inlet . . . . . . . . . . . . . . . . . . . 1/2” NPTF
Exhaust Port . . . . . . . . . . . . . . 1-1/4” NPTF
Lower Pump Model . . . . . . . . . . 66300-X4X
Lower Pump Repair Kit. . . . . . 637305-X43
Material Inlet. . . . . . . . . . . . . . . . 1” NPT(F) 2” NPT(M)
Material Outlet . . . . . . . . . . . . . . 1” NPTF
Weight . . . . . . . . . . . . . . . . . . . . . 46.2 lbs. (21 kgs.)
Reference Mounting Footprint “A” or “D”for related rams/accessories
Air F/R/L: C28241-810Airline Oil: 62274Air Motor Muffler: 91790Wet Sol: 66333-BWall Mount: 66101Floor/Follower Adpt. 67136
39-3/4(1009 mm)
12-11/16(322 mm)
18-15/16”(481 mm)
6 5 0 6 8 3 - X 4 X
®
Packings3 : TeflonC : UHMW-PEG : UHMW-PE/Leather StaggeredP : UHMW-PE/Teflon Staggered (Upper),
UHMW-PE (Lower)R : Teflon/UHMW-PE Staggered (Upper),
Teflon (Lower)
Plungers3 : 17-4 S. S. Hard
Chrome PlatedB : 17-4 S.S. “Ultra”
Coated
C O AT I N G ™
42 | 6”, 23:1, 2-Ball • Piston Pumps
Pump Performance
Pump Specifications
Ordering
650683-X4X
43688.qxd 2/8/06 9:33 AM Page 45
Air Inlet Pressure Range. . . . . . 30 - 90 PSI (2 - 6.1 bar).
Fluid Pressure Range . . . . . . . . 2070 PSI (140.8 bar) Max.
Max. Rec’d Cycles Per Minute . 70
Displacement Per Cycle . . . . . . 59.9 in3 (981.5 cm3)
Cycles Per Gallon (Liter) . . . . . . 3.8 (1.0)
Flow @ 60 Cycles / Minute . . . . 18.1 GPM (68.6 lpm)
Noise Level @ 70 Psi. . . . . . . . . 88 db(A) w/muffler
Lower Pump Material . . . . . . . . 400 Stainless Steel
Plunger Material. . . . . . . . . . . . . 15-5 Stainless Steel (Hard Chrome)
Cylinder Material . . . . . . . . . . . . 15-5 Stainless Steel (Hard Chrome)
Air Motor. . . . . . . . . . . . . . . . . . . 66506-B
Motor Repair Kit . . . . . . . . . . . 637112
Motor Diameter . . . . . . . . . . . . 12”
Stroke . . . . . . . . . . . . . . . . . . . . 6”
Air Inlet . . . . . . . . . . . . . . . . . . . 3/4” NPT(F)
Lower Pump Model . . . . . . . . . . 66941-X6D
Lower Pump Repair Kit. . . . . . 637211-XXX
Material Inlet. . . . . . . . . . . . . . . . 2” NPT(M)
Material Outlet . . . . . . . . . . . . . . 1-1/4” NPT(F)
Weight . . . . . . . . . . . . . . . . . . . . . 140 lbs. (63.6 kgs.)
Reference Mounting Footprint “A”for related rams/accessories
Air F/R/L: 28353Wall Mount: 66542Airline Oil: 62274Muffler: 66718Wet Sol: 66333-BFloor/Follower Adpt. 67136
6 5 0 9 6 7 - X 6 D - B PackingsC : UHMW-PEL : Mineral-Filled TeflonP : UHMW-PE/Teflon (Upper), UHMW-PE(Lower)R : Teflon/UHMW-PE (Upper), Teflon (Lower)
45(1143 mm)
14.6(370.8 mm) 25.2
(640.5 mm)
Pump Performance
Pump Specifications
AccessoriesOrdering
12”, 23:1, 2-Ball • Piston Pumps | 43
650967-X6D-B
43688.qxd 2/8/06 9:33 AM Page 46
Air Inlet Pressure Range. . . . . . 30 - 90 PSI (2 - 6.1 bar).
Fluid Pressure Range . . . . . . . . 2070 PSI (140.8 bar) Max.
Max. Rec’d Cycles Per Minute . 70
Displacement Per Cycle . . . . . . 59.9 in3 (981.5 cm3)
Cycles Per Gallon (Liter) . . . . . . 3.8 (1.0)
Flow @ 60 Cycles / Minute . . . . 18.1 GPM (68.6 lpm)
Noise Level @ 70 Psi. . . . . . . . . 88 db(A) w/muffler
Lower Pump Material . . . . . . . . 300 Stainless Steel
Plunger Material. . . . . . . . . . . . . 304 Stainless Steel (Hard Chrome)
Cylinder Material . . . . . . . . . . . . 304 Stainless Steel (Hard Chrome)
Air Motor. . . . . . . . . . . . . . . . . . . 66506-B
Motor Repair Kit . . . . . . . . . . . 637112
Motor Diameter . . . . . . . . . . . . 12”
Stroke . . . . . . . . . . . . . . . . . . . . 6”
Air Inlet . . . . . . . . . . . . . . . . . . . 3/4” NPT(F)
Lower Pump Model . . . . . . . . . . 66942-XXF
Lower Pump Repair Kit. . . . . . 637211-XXX
Material Inlet. . . . . . . . . . . . . . . . 2” NPT(M)
Material Outlet . . . . . . . . . . . . . . 1-1/4” NPT(F)
Weight . . . . . . . . . . . . . . . . . . . . . 140 lbs. (63.6 kgs.)
Reference Mounting Footprint “A”for related rams/accessories
Air F/R/L: 28353Wall Mount: 66542Airline Oil: 62274Muffler: 66718Wet Sol: 66333-BFloor/Follower Adpt. 67136
45(1143 mm)
14.6(370.8 mm)
6 1 3 1 2 4 - X X F - CPackingsC6 : UHMW-PEK3 : CG-Filled Teflon with, Buna N EnergizedL6 : Mineral-Filled TeflonR6 : Teflon/UHMW-PE (Upper), Teflon (Lower)
25.2(640.5 mm)
44 | 12”, 23:1, 2-Ball • Piston Pumps
Pump Performance
Pump Specifications
AccessoriesOrdering
613124-XXF-C
43688.qxd 2/8/06 9:33 AM Page 47
4-1/4”, 30:1, 2-Ball • Piston Pumps | 45
Air Inlet Pressure Range. . . . . . 30 - 120 PSI (2 - 8.3 bar)
Fluid Pressure Range . . . . . . . . 900 - 4500 PSI (61.2 - 306.1 bar)
Max. Rec’d Cycles Per Minute . 60
Displacement Per Cycle . . . . . . 5.5 in3 (90.1 cm3)
Cycles Per Gallon (Liter) . . . . . . 41.9 (11)
Flow @ 60 Cycles / Minute . . . . 1.3 GPM (4.9 lpm)
Noise Level @ 60 Psi. . . . . . . . . 81.8 db(A)
Lower Pump Material . . . . . . . . 300 Stainless Steel
Plunger Material. . . . . . . . . . . . . 17-4 Stainless Steel
Cylinder Material . . . . . . . . . . . . 316 Stainless Steel
Air Motor. . . . . . . . . . . . . . . . . . . 65465-B
Motor Repair Kit . . . . . . . . . . . 61268
Motor Diameter . . . . . . . . . . . . 4-1/4”
Stroke . . . . . . . . . . . . . . . . . . . . 6”
Air Inlet . . . . . . . . . . . . . . . . . . . 1/2” NPT(F)
Exhaust Port . . . . . . . . . . . . . . 1-1/4” NPT(F)
Lower Pump Model . . . . . . . . . . 66302-X4X
Lower Pump Repair Kit. . . . . . 637307-X43
Material Inlet. . . . . . . . . . . . . . . . 1” NPT(F) 2” NPT(M)
Material Outlet . . . . . . . . . . . . . . 1” NPT(F)
Weight . . . . . . . . . . . . . . . . . . . . . 42.9 lbs. (19.5 kgs.)
Reference Mounting Footprint “A” or “D”for related rams/accessories
Air F/R/L: C28241-810Airline Oil: 62274Air Motor Muffler: 91790Wet Sol: 66333-BFloor/Follower Adpt. 67136 Floor Mount: 65138
39-3/4(1009.3 mm)
18-15/16(481 mm)
12-11/16(322 mm)
6 5 0 4 8 5 - X 4 X
®
Packings3 : TeflonC : UHMW-PEG : UHMW-PE/Leather StaggeredP : UHMW-PE/Teflon Staggered (Upper),
UHMW-PE (Lower)R : Teflon/UHMW-PE Staggered (Upper),
Teflon (Lower)
Plungers3 : 17-4 S. S. Hard
Chrome PlatedB : 17-4 S.S. “Ultra”
Coated
C O AT I N G ™Pump Performance
Pump Specifications
AccessoriesOrdering
650485-X4X
43688.qxd 2/8/06 9:33 AM Page 48
46 | 8”, 40:1, 2-Ball • Piston Pumps
Air Inlet Pressure Range. . . . . . 30 - 120 PSI (2 - 8.3 bar)
Fluid Pressure Range . . . . . . . . 1200 - 4800 PSI (81.6 - 326.5 bar)
Max. Rec’d Cycles Per Minute . 60
Displacement Per Cycle . . . . . . 14.5 in3 (237.6 cm3)
Cycles Per Gallon (Liter) . . . . . . 16 (4.2)
Flow @ 60 Cycles / Minute . . . . 3.7 GPM (13.9 lpm)
Noise Level @ 60 Psi. . . . . . . . . 89.8 db(A)
Lower Pump Material . . . . . . . . 300 Stainless Steel
Plunger Material. . . . . . . . . . . . . 17-4 Stainless Steel
Cylinder Material . . . . . . . . . . . . 316 Stainless Steel
Air Motor. . . . . . . . . . . . . . . . . . . 66523-B
Motor Repair Kit . . . . . . . . . . . 66614
Motor Diameter . . . . . . . . . . . . 8”
Stroke . . . . . . . . . . . . . . . . . . . . 6”
Air Inlet . . . . . . . . . . . . . . . . . . . 3/4” NPT(F)
Exhaust Port . . . . . . . . . . . . . . 1-1/4” NPT(F)
Lower Pump Model . . . . . . . . . . 66300-X4X
Lower Pump Repair Kit. . . . . . 637305-X43
Material Inlet. . . . . . . . . . . . . . . . 1” NPT(F) 2” NPT(M)
Material Outlet . . . . . . . . . . . . . . 1” NPT(F)
Weight . . . . . . . . . . . . . . . . . . . . . 68.1 lbs. (30.9 kgs.)
Reference Mounting Footprint “A” or “D”for related rams/accessories
Air F/R/L: 28353Airline Oil: 62274Air Motor Muffler: 92460Wet Sol: 66333-BFloor/Follower Adpt. 67136Rams: Page 13Floor Mounts: 65138
6 5 0 8 8 3 - X 4 X - B
43-9/16(1106 mm)
22-5/8(575 mm)
12-11/16(322 mm)
Packings3 : TeflonC : UHMW-PEG : UHMW-PE/Leather StaggeredP : UHMW-PE/Teflon Staggered (Upper),
UHMW-PE (Lower)R : Teflon/UHMW-PE Staggered (Upper),
Teflon (Lower)
PlungersD : 17-4 S. S. Hard
Chrome PlatedG : 17-4 S.S. “Ultra”
Coated
®C O AT I N G ™
Pump Performance
Pump Specifications
AccessoriesOrdering
650883-X4X-B
43688.qxd 2/8/06 9:33 AM Page 49
Air Inlet Pressure Range. . . . . . 30 - 120 PSI (2 - 8.3 bar)
Fluid Pressure Range . . . . . . . . 1350 - 5400 PSI (92.8 - 367.3 bar)
Max. Rec’d Cycles Per Minute . 60
Displacement Per Cycle . . . . . . 7.5 in3 (122.9 cm3)
Cycles Per Gallon (Liter) . . . . . . 30.9 (8.1)
Flow @ 60 Cycles / Minute 1.9 GPM (7.2 lpm)
Noise Level @ 60 Psi. . . . . . . . . 84.8 db(A)
Lower Pump Material . . . . . . . . 300 Stainless Steel
Plunger Material. . . . . . . . . . . . . 17-4 Stainless Steel
Cylinder Material . . . . . . . . . . . . 316 Stainless Steel
Air Motor. . . . . . . . . . . . . . . . . . . 65665-B
Motor Repair Kit . . . . . . . . . . . 61355
Motor Diameter . . . . . . . . . . . . 6”
Stroke . . . . . . . . . . . . . . . . . . . . 6”
Air Inlet . . . . . . . . . . . . . . . . . . . 1/2” NPT(F)
Lower Pump Model . . . . . . . . . . 66301-X4X
Lower Pump Repair Kit. . . . . . 637306-X43
Material Inlet. . . . . . . . . . . . . . . . 1” NPT(F) 2” NPT(M)
Material Outlet . . . . . . . . . . . . . . 1” NPT(F)
Weight . . . . . . . . . . . . . . . . . . . . . 46.2 lbs. (21 kgs.)
39-3/4(1009 mm)
12-11/16(322 mm)
18-15/16”(481 mm)
®
6 5 0 6 8 4 - X 4 XPackings3 : TeflonC : UHMW-PEG : UHMW-PE/Leather StaggeredP : UHMW-PE/Teflon Staggered (Upper),
UHMW-PE (Lower)R : Teflon/UHMW-PE Staggered (Upper),
Teflon (Lower)
Plungers3 : 17-4 S. S. Hard
Chrome PlatedB : 17-4 S.S. “Ultra”
Coated
C O AT I N G ™Pump Performance
Pump Specifications
AccessoriesOrdering
6”, 45:1, 2-Ball • Piston Pumps | 47
650684-X4X
Reference Mounting Footprint “A” or “D”for related rams/accessories
Air F/R/L: C28241-810Airline Oil: 62274Air Motor Muffler: 91790Wet Sol: 66333-BWall Mounts: 66101Floor/Follower Adpt. 67136
43688.qxd 2/8/06 9:33 AM Page 50
Air Inlet Pressure Range. . . . . . 30 - 90 PSI (2 - 6.1 bar)
Fluid Pressure Range . . . . . . . . 1350 - 4500 PSI (91.8 - 306.1 bar)
Max. Rec’d Cycles Per Minute . 60
Displacement Per Cycle . . . . . . 20.7 in3 (339.2 cm3)
Cycles Per Gallon (Liter) . . . . . . 11.2 (3.0)
Flow @ 60 Cycles / Minute . . . . 5.4 GPM (20.4 lpm)
Noise Level @ 60 Psi. . . . . . . . . 82 db(A) w/66718 muffler
Reference Mounting Footprint “B”for related rams/accessories
Air F/R/L: 28353Airline Oil: 62274Air Motor Muffler: 66718Wet Sol: 66333-BWall Mount: 66542Floor Mounts: 65139
6 5 0 8 6 3 - X 4 D - BPackings3 : TeflonC : UHMW-PEG : UHMW-PE/Leather StaggeredP : UHMW-PE/Teflon StaggeredR : Teflon/UHMW-PE Staggered
Lower Pump Material . . . . . . . . Carbon Steel
Plunger Material. . . . . . . . . . . . . 17-4 Stainless Steel (Hard Chrome)
Cylinder Material . . . . . . . . . . . . 420 Stainless Steel
Air Motor. . . . . . . . . . . . . . . . . . . 66651-B
Motor Repair Kit . . . . . . . . . . . 637110
Motor Diameter . . . . . . . . . . . . 10”
Stroke . . . . . . . . . . . . . . . . . . . . 6”
Air Inlet . . . . . . . . . . . . . . . . . . . 3/4” NPT(F)
Lower Pump Model . . . . . . . . . . 66475-X4D
Lower Pump Repair Kit. . . . . . 637098-XXX
Material Inlet. . . . . . . . . . . . . . . . 2” NPT(F)
Material Outlet . . . . . . . . . . . . . . 1” NPT(F)
Weight . . . . . . . . . . . . . . . . . . . . . 132 lbs. (60 kgs.)
16(429 mm)
45.9(1166 mm)
48 | 10”, 45:1, 2-Ball • Piston Pumps
Pump Performance
Pump Specifications
AccessoriesOrdering
650863-X4D-B
43688.qxd 2/8/06 9:33 AM Page 51
6”, 60:1, 2-Ball • Piston Pumps | 49
Air Inlet Pressure Range. . . . . . 30 - 120 PSI (2 - 8.3 bar)
Fluid Pressure Range . . . . . . . . 1800 - 6000 PSI (124 - 408 bar)
Max. Rec’d Cycles Per Minute . 60
Displacement Per Cycle . . . . . . 5.5 in3 (90.1 cm3)
Cycles Per Gallon (Liter) . . . . . . 41.9 (11.0)
Flow @ 60 Cycles / Minute . . . . 1.3 GPM (4.9 lpm)
Noise Level @ 60 Psi. . . . . . . . . 84.8 db(A)
Lower Pump Material . . . . . . . . 300 Stainless Steel
Plunger Material. . . . . . . . . . . . . 17-4 Stainless Steel
Cylinder Material . . . . . . . . . . . . 316 Stainless Steel
Air Motor. . . . . . . . . . . . . . . . . . . 65665-B
Motor Repair Kit . . . . . . . . . . . 61355
Motor Diameter . . . . . . . . . . . . 6”
Stroke . . . . . . . . . . . . . . . . . . . . 6”
Air Inlet . . . . . . . . . . . . . . . . . . . 1/2” NPT(F)
Lower Pump Model . . . . . . . . . . 66302-X4X
Lower Pump Repair Kit. . . . . . 637307-X43
Material Inlet. . . . . . . . . . . . . . . . 1” NPT(F) 2” NPT(M)
Material Outlet . . . . . . . . . . . . . . 1” NPT(F)
Weight . . . . . . . . . . . . . . . . . . . . . 46.2 lbs. (21 kgs.)
39-3/4(1009 mm)
12-11/16(322 mm)
18-15/16”(481 mm)
®
Reference Mounting Footprint “A” or “D”for related rams/accessories
Air F/R/L: C28241-810Airline Oil: 62274Air Motor Muffler: 91790Wet Sol: 66333-BWall Mounts: 66101Floor/Follower Adpt. 67136
C O AT I N G ™Pump Performance
Pump Specifications
AccessoriesOrdering
650685-X4X
6 5 0 6 8 5 - X 4 XPackings3 : TeflonC : UHMW-PEG : UHMW-PE/Leather StaggeredP : UHMW-PE/Teflon Staggered (Upper),
UHMW-PE (Lower)R : Teflon/UHMW-PE Staggered (Upper),
Teflon (Lower)
Plungers3 : 17-4 S. S. Hard
Chrome PlatedB : 17-4 S.S. “Ultra”
Coated
43688.qxd 2/8/06 9:33 AM Page 52
50 | 12”, 65:1, 2-Ball • Piston Pumps
Air Inlet Pressure Range. . . . . . 30 - 90 PSI (2 - 6.1 bar)
Fluid Pressure Range . . . . . . . . 1950 - 6500 PSI (132.6 - 442 bar)
Max. Rec’d Cycles Per Minute . 60
Displacement Per Cycle . . . . . . 20.7 in3 (339 cm3)
Cycles Per Gallon (Liter) . . . . . . 11.2 (2.9)
Flow @ 60 Cycles / Minute . . . . 5.4 GPM (20.4 lpm)
Noise Level @ 60 Psi. . . . . . . . . 88 db(A) w/66718 muffler
Lower Pump Material . . . . . . . . Carbon Steel
Plunger Material. . . . . . . . . . . . . 17-4 Stainless Steel (Hard Chrome)
Cylinder Material . . . . . . . . . . . . 420 Stainless Steel
Air Motor. . . . . . . . . . . . . . . . . . . 66506-B
Motor Repair Kit . . . . . . . . . . . 637112
Motor Diameter . . . . . . . . . . . . 12”
Stroke . . . . . . . . . . . . . . . . . . . . 6”
Air Inlet . . . . . . . . . . . . . . . . . . . 3/4” NPT(F)
Lower Pump Model . . . . . . . . . . 66475-X4D
Lower Pump Repair Kit. . . . . . 637098-XXX
Material Inlet. . . . . . . . . . . . . . . . 2” NPT(F)
Material Outlet . . . . . . . . . . . . . . 1” NPT(F)
Weight . . . . . . . . . . . . . . . . . . . . . 147 lbs. (66.8 kgs.)
Reference Mounting Footprint “B”for related rams/accessories
Air F/R/L: 28353Airline Oil: 62274Air Motor Muffler: 66718Wet Sol: 66333-BWall Mounts: 66542Floor Mount: 65139
6 5 0 9 6 3 - X 4 D - BPackings3 : TeflonC : UHMW-PEG : UHMW-PE/Leather StaggeredP : UHMW-PE/Teflon StaggeredR : Teflon/UHMW-PE Staggered
45.9(1167.5 mm)
16.09(4087 mm)
26.0(662.7 mm)
Pump Performance
Pump Specifications
AccessoriesOrdering
650963-X4D-B
43688.qxd 2/8/06 9:33 AM Page 53
4-1/4”, 12:1, Chop Check • Piston Pumps | 51
Air Inlet Pressure Range. . . . . . 30 - 120 PSI (2 - 8.3 bar)
Fluid Pressure Range . . . . . . . . 360 - 1800 PSI (24.4 - 122.4 bar)
Max. Rec’d Cycles Per Minute . 60
Displacement Per Cycle . . . . . . 12.6 in3 (206.4 cm3)
Cycles Per Gallon (Liter) . . . . . . 18.3 (4.8)
Flow @ 60 Cycles / Minute . . . . 3.3 GPM (12.4 lpm)
Noise Level @ 60 Psi. . . . . . . . . 80 db(A) w/muffler
Lower Pump Material . . . . . . . . Carbon Steel
Plunger Material. . . . . . . . . . . . . 17-4 Stainless Steel (Hard Chrome)
Cylinder Material . . . . . . . . . . . . Carbon Steel
Air Motor. . . . . . . . . . . . . . . . . . . 65465-B
Motor Repair Kit . . . . . . . . . . . 61268
Motor Diameter . . . . . . . . . . . . 4-1/4”
Stroke . . . . . . . . . . . . . . . . . . . . 6”
Air Inlet . . . . . . . . . . . . . . . . . . . 1/2” NPT(F)
Exhaust Port . . . . . . . . . . . . . . 1-1/4” NPT(F)
Lower Pump Model . . . . . . . . . . 66243-X43-B
Lower Pump Repair Kit. . . . . . 637071-X43-B
Material Inlet. . . . . . . . . . . . . . . . Flange Mount
Material Outlet . . . . . . . . . . . . . . 1” NPT(F)
Weight . . . . . . . . . . . . . . . . . . . . . 64 lbs. (29 kgs.)
6 5 0 4 9 1 - X 4 3 - B
Packings3 : Glass-Filled Teflon (Upper & Lower)C : UHMW-PE (Upper & Lower)G : UHMW-PE/Leather Staggered (Upper & Lower)P : UHMW-PE/Teflon Staggered (Upper), UHMW-(Lower)R : Teflon/UHMW-PE Staggered (Upper), Teflon (Lower)
51.6(1311.9 mm)
30.7(780.6 mm)
17.7(450.4 mm)
Pump Performance
Pump Specifications
Accessories
Ordering
650491-X43-B
Reference Mounting Footprint “A”for related rams/accessories
Air F/R/L: C28241-810Airline Oil: 62274Air Motor Muffler: 91790Wet Sol: 66333-BFloor Mount: 65138Rams: Pages 13-15
43688.qxd 2/8/06 9:33 AM Page 54
52 | 8”, 13:1, Chop Check • Piston Pumps
Air Inlet Pressure Range. . . . . . 30 - 120 PSI (2 - 8.3 bar)
Fluid Pressure Range . . . . . . . . 390 - 1560 PSI (26.5 - 106.1 bar)
Max. Rec’d Cycles Per Minute . 60
Displacement Per Cycle . . . . . . 40.4 in3 (662 cm3)
Cycles Per Gallon (Liter) . . . . . . 5.7 (1.5)
Flow @ 60 Cycles / Minute . . . . 10.5 GPM (39.6 lpm)
Noise Level @ 60 Psi. . . . . . . . . 80 db(A) w/muffler
Lower Pump Material . . . . . . . . Carbon Steel Plunger Material. . . . . . . . . . . . . Carbon Steel (Hard Chrome)Cylinder Material . . . . . . . . . . . . Carbon Steel Air Motor. . . . . . . . . . . . . . . . . . . 66523-B
Motor Repair Kit . . . . . . . . . . . 66614Motor Diameter . . . . . . . . . . . . 8”Stroke . . . . . . . . . . . . . . . . . . . . 6”Air Inlet . . . . . . . . . . . . . . . . . . . 3/4” NPT(F)Exhaust Port . . . . . . . . . . . . . . 1-1/4” NPT(F)
Lower Pump Model . . . . . . . . . . 66236-XXE-BLower Pump Repair Kit. . . . . . 637128-XX4-B
Material Inlet . . . . . . . . . . . . . . . Flange MountMaterial Outlet . . . . . . . . . . . . . . 1-1/2” NPT(F)Weight . . . . . . . . . . . . . . . . . . . . . 125.5 lbs. (57 kgs.)
Reference Mounting Footprint “B”for related rams/accessories
Air F/R/L: 28353Airline Oil: 62274Air Motor Muffler: 92460Wet Sol: 66333-BFloor Mount: 65139Ram: Pages 13-15
52.3(1329.5 mm)
20(508 mm)
31.4(797.7 mm)
Pump Performance
Pump Specifications
AccessoriesOrdering
650871-XXE-C
6 5 0 8 7 1 - X X E - CPackings / Springs34 : Glass-Filled Teflon (Upper & Lower), Multiple Wave SpringC4 : UHMW-PE (Upper & Lower), Multiple Wave SpringF4 : UHMW-PE/Leather Staggered (Upper), UHMW-PE (Lower), Multiple Wave SpringJ3 : Polyurethane (Upper), UHMW-PE (Lower), No SpringJ8 : Polyurethane (Upper), UHMW-PE (Lower), Multiple Wave SpringP4 : UHMW-PE/Teflon Staggered (Upper), UHMW-PE (Lower), Multiple Wave SpringR4 : Teflon/UHMW-PE Staggered (Upper), Teflon (Lower)
Multiple Wave Spring
43688.qxd 2/8/06 9:33 AM Page 55
Air Inlet Pressure Range. . . . . . 30 - 90 PSI (2 - 6.1 bar)
Fluid Pressure Range . . . . . . . . 1,800 PSI (122.4 bar)
Max. Rec’d Cycles Per Minute . 60
Displacement Per Cycle . . . . . . 40.4 in3 (662 cm3)
Cycles Per Gallon (Liter) . . . . . . 5.7 (1.5)
Flow @ 60 Cycles / Minute . . . . 10.5 GPM (39.6 lpm)
Noise Level @ 60 Psi. . . . . . . . . 82 db(A) w/muffler
Lower Pump Material . . . . . . . . Carbon Steel Plunger Material. . . . . . . . . . . . . Carbon Steel (Hard Chrome)Cylinder Material . . . . . . . . . . . . Carbon SteelAir Motor. . . . . . . . . . . . . . . . . . . 66651-B
Motor Repair Kit . . . . . . . . . . . 637110Motor Diameter . . . . . . . . . . . . 10”Stroke . . . . . . . . . . . . . . . . . . . . 6”Air Inlet . . . . . . . . . . . . . . . . . . . 3/4” NPT(F)Exhaust Port . . . . . . . . . . . . . . 1-1/4” NPT(F)
Lower Pump Model . . . . . . . . . . 66236-XXE-BLower Pump Repair Kit. . . . . . 637128-XX4-B
Material Inlet. . . . . . . . . . . . . . . . Bolted FlangeMaterial Outlet . . . . . . . . . . . . . . 1-1/2” NPT(F)Weight . . . . . . . . . . . . . . . . . . . . . 144 lbs. (65.4 kgs.)
51.2(1301.7 mm)
20(508 mm)
31.4(797.7 mm)
Pump Performance
Pump Specifications
AccessoriesOrdering
650875-XXE-C
6 5 0 8 7 5 - X X E - CPackings / SpringsC4 : UHMW-PE (Upper & Lower), Multiple Wave SpringF4 : UHMW-PE/Leather Staggered (Upper), UHMW-PE (Lower),
Multiple Wave SpringJ3 : Polyurethane (Upper), UHMW-PE (Lower),
No SpringP4 : UHMW-PE/Teflon Staggered (Upper), UHMW-PE (Lower),
Multiple Wave SpringR4 : Teflon/UHMW-PE Staggered (Upper), Teflon (Lower)
Multiple Wave Spring
10”, 20:1, Chop Check • Piston Pumps | 53
Reference Mounting Footprint “B”for related rams/accessories
Air F/R/L: 28353Airline Oil: 62274Air Motor Muffler: 66718Wet Sol: 66333-BFloor Mount: 65139Rams: Pages 13-15
43688.qxd 2/8/06 9:33 AM Page 56
54 | 3”, 22:1, Chop Check • Piston Pumps
Air Inlet Pressure Range. . . . . . 30 - 120 PSI (2 - 8.3 bar)
Fluid Pressure Range . . . . . . . . 660 - 3300 PSI (44.8 - 244.4 bar)
Displacement Per Cycle . . . . . . 1.9 in3 (31.1 cm3)
Cycles Per Gallon (Liter) . . . . . . 121.5 (32.1)
Maximum Working Flow . . . . . . .1.0 GPM (3.8 lpm)
Noise Level @ 100 Psi. . . . . . . . 85 db(A)
Lower Pump Material . . . . . . . . Carbon SteelPlunger Material. . . . . . . . . . . . . 17 - 4 Stainless SteelCylinder Material . . . . . . . . . . . . Carbon SteelAir Motor. . . . . . . . . . . . . . . . . . . 66915
Motor Repair Kit . . . . . . . . . . . 637316Motor Diameter . . . . . . . . . . . . 3”Stroke . . . . . . . . . . . . . . . . . . . . 3”Air Inlet . . . . . . . . . . . . . . . . . . . 1/4” NPTF-1 (f)
Lower Pump Models:Model NM2322E-11-P43 . . . . . 67100-P43Model NM2322E-11-P48 . . . . . 67100-P48Model NM2322E-71-P43 . . . . . 67100-P43
Lower Pump Repair Kits:Model NM2322E-11-P43 . . . . . 637290-P43Model NM2322E-11-P48 . . . . . 637290-P48Model NM2322E-71-P43 . . . . . 637290-P43
Material Inlet. . . . . . . . . . . . . . . . Follower Plate MountedMaterial Outlet . . . . . . . . . . . . . . 1/2” NPT(F)Weight . . . . . . . . . . . . . . . . . . . . . 28.7 lbs. (13 kgs.)
N M 2 3 2 2 E - X X - P 4 X
A
B
16-5/16(430 mm)
14-3/16(360 mm)
Packing / Plunger3 : UHMW-PE/Teflon Staggered (Upper),
UHMW-PE Grooved Piston (Lower)8 : UHMW-PE/Teflon Staggered (Upper),
UHMW-PE Single Lip Cup (Lower)
11 : Standard Length (651615-C)71 : Extended Length (651613-B)
Pump Performance
Pump Specifications
AccessoriesOrderingReference Mounting Footprint “C”for related rams/accessories
Air F/R/L: C28121-800Airline Oil: 62274Wet Sol: 66333-BFollower Plate: See Page 16
Model “A”(mm) “B”(mm)NM2322X-11-P4X 33-7/32”(843.9) 24-7/16”(620.8)NM2322X-71-P4X 42-5/8”(1082.7) 33-11/32”(846.9)
43688.qxd 2/8/06 9:33 AM Page 57
3”, 22:1, Chop Check • Piston Pumps | 55
Air Inlet Pressure Range. . . . . . . . . . . . . . . 30 - 120 PSI (2 - 8.3 bar)Fluid Pressure Range . . . . . . . . . . . . . . . . . 660 - 3300 PSI (44.8 - 244.4 bar)Max. Rec’d Cycles Per Minute . . . . . . . . . . 120Displacement Per Cycle . . . . . . . . . . . . . . . 1.9 in3 (31.1 cm3)Cycles Per Gallon (Liter) . . . . . . . . . . . . . . . 121.5 (32.1)Maximum Working Flow . . . . . . . . . . . . . . . .1.0 GPM (3.8 lpm)Noise Level @ 100 Psi. . . . . . . . . . . . . . . . . 85 db(A)
N M 2 3 2 2 F - X X - P 4 X
Lower Pump Material. . . . . . . . . . . . . . . . . . 316 Stainless SteelPlunger Material. . . . . . . . . . . . . . . . . . . . . . 17 - 4 Stainless Steel (Hard Chrome)Cylinder Material . . . . . . . . . . . . . . . . . . . . . 15-5 Stainless Steel (Hard Chrome)Air Motor. . . . . . . . . . . . . . . . . . . . . . . . . . . . 66915
Motor Repair Kit. . . . . . . . . . . . . . . . . . . . . 637316Motor Diameter . . . . . . . . . . . . . . . . . . . . . 3”Stroke . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3”Air Inlet . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1/4” NPTF-1 (F)
Lower Pump Models:Model NM2322F-11-P43. . . . . . . . . . . . . . . 67101-P43Model NM2322F-11-P48. . . . . . . . . . . . . . . 67101-P43Model NM2322F-71-P43. . . . . . . . . . . . . . . 67101-P43
Lower Pump Repair Kits:Model NM2322F-11-P43. . . . . . . . . . . . . . . 637291-P43Model NM2322F-11-P48. . . . . . . . . . . . . . . 637291-P48Model NM2322F-71-P43. . . . . . . . . . . . . . . 637291-P43
Material Inlet. . . . . . . . . . . . . . . . . . . . . . . . . Follower Plate MountedMaterial Outlet . . . . . . . . . . . . . . . . . . . . . . . 1/2” NPT(F)Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28.7 lbs. (13 kgs.)
Packing / Plunger3 : UHMW-PE/Teflon Staggered (Upper),
UHMW-PE Grooved Piston (Lower)8 : UHMW-PE/Teflon Staggered (Upper),
UHMW-PE Single Lip Cup (Lower)
16-15/16(430 mm)
14-3/16(360 mm)
Pump Performance
Pump Specifications
AccessoriesOrdering
Reference Mounting Footprint “C”for related rams/accessories
Air F/R/L: C28121-800Airline Oil: 62274Wet Sol: 66333-BFollower Plate: 651841-1
See Page 16
11 : Standard Length (651615-C)71 : Extended Length (651613-B)
A
B
Model “A”(mm) “B”(mm)NM2322X-11-P4X 33-7/32”(843.9) 24-7/16”(620.8)NM2322X-71-P4X 42-5/8”(1082.7) 33-11/32”(846.9)
43688.qxd 2/8/06 9:33 AM Page 58
56 | 4-1/4”, 23:1, Chop Check • Piston Pumps
Air Inlet Pressure Range. . . . . . 30 - 120 PSI (2 - 8.3 bar)
Fluid Pressure Range . . . . . . . . 690 - 3450 PSI (46.9 - 234.6 bar)
Max. Rec’d Cycles Per Minute . 60
Displacement Per Cycle . . . . . . 6.9 in3 (113 cm3)
Cycles Per Gallon . . . . . . . . . . . 33 (8.8)
Flow @ 60 Cycles / Minute . . . . 1.8 GPM (6.8 lpm)
Noise Level @ 60 Psi. . . . . . . . . 80 db(A)
Lower Pump Material . . . . . . . . Carbon Steel
Plunger Material. . . . . . . . . . . . . 17-4 Stainless (Hard Chrome)
Cylinder Material . . . . . . . . . . . . Carbon Steel
Air Motor. . . . . . . . . . . . . . . . . . . 65465-B
Motor Repair Kit . . . . . . . . . . . 61268
Motor Diameter . . . . . . . . . . . . 4-1/4”
Stroke . . . . . . . . . . . . . . . . . . . . 6”
Air Inlet . . . . . . . . . . . . . . . . . . . 1/2” NPT(F)
Exhaust Port . . . . . . . . . . . . . . 1-1/4” NPT(F)
Lower Pump Model . . . . . . . . . . 66266-X43-B
Lower Pump Repair Kit. . . . . . 637074-X43-B
Material Inlet. . . . . . . . . . . . . . . . Bolted Flange
Material Outlet . . . . . . . . . . . . . . 1” NPT(F)
Weight . . . . . . . . . . . . . . . . . . . . . 63.7 lbs. (28.9 kgs.)
6 5 0 4 9 2 - X 4 3 - B
51.6(1310.6 mm)
30.7(779.8 mm)
17.7(449.6 mm)
Packings3 : Glass-Filled Teflon (Upper & Lower)C : UHMW-PE (Upper & Lower)G : UHMW-PE/Leather Staggered (Upper & Lower)P : UHMW-PE/Teflon Staggered (Upper), UHMW-PE (Lower)R : Teflon/UHMW-PE Staggered (Upper), Teflon (Lower)
Pump Performance
Pump Specifications
AccessoriesOrdering
650492-X43-B
Reference Mounting Footprint “A”for related rams/accessories
Air F/R/L: C28241-810Airline Oil: 62274Air Motor Muffler: 91790Wet Sol: 66333-BFloor Mount: 65138Rams: Pages 13-15
43688.qxd 2/8/06 9:33 AM Page 59
6”, 23:1, Chop Check • Piston Pumps | 57
Air Inlet Pressure Range. . . . . . 30 - 120 PSI (2 - 8.3 bar)
Fluid Pressure Range . . . . . . . . 690 - 3450 PSI (46.9 - 234.6 bar)
Max. Rec’d Cycles Per Minute . 60
Displacement Per Cycle . . . . . . 12.6 in3 (206.4 cm3)
Cycles Per Gallon (Liter) . . . . . . 18.3 (4.8)
Flow @ 60 Cycles / Minute . . . . 3.3 GPM (12.4 lpm)
Noise Level @ 60 Psi. . . . . . . . . 83 db(A) w/muffler
Reference Mounting Footprint “A”for related rams/accessories
Air F/R/L: C28241-810Airline Oil: 62274Air Motor Muffler: 91790Wet Sol: 66333-BFloor Mount: 65138Rams: Pages 13-15
6 5 0 6 9 1 - X 4 3 - B
51.6(1310.6 mm)
30.7(779.8 mm)
17.7(449.6 mm)
Packings3 : Glass-Filled Teflon (Upper & Lower)C : UHMW-PE (Upper & Lower)G : UHMW-PE/Leather Staggered (Upper & Lower)P : UHMW-PE/Teflon Staggered (Upper), UHMW-PE (Lower)R : Teflon/UHMW-PE Staggered (Upper), Teflon (Lower)
Lower Pump Material . . . . . . . . Carbon Steel
Plunger Material. . . . . . . . . . . . . 17-4 Stainless Steel (Hard Chrome)
Cylinder Material . . . . . . . . . . . . Carbon Steel
Air Motor. . . . . . . . . . . . . . . . . . . 65665-B
Motor Repair Kit . . . . . . . . . . . 61355
Motor Diameter . . . . . . . . . . . . 6”
Stroke . . . . . . . . . . . . . . . . . . . . 6”
Air Inlet . . . . . . . . . . . . . . . . . . . 1/2” NPT(F)
Exhaust Port . . . . . . . . . . . . . . 1-1/4” NPT(F)
Lower Pump Model . . . . . . . . . . 66243-X43-B
Lower Pump Repair Kit. . . . . . 637071-X43-B
Material Inlet. . . . . . . . . . . . . . . . Bolted Flange
Material Outlet . . . . . . . . . . . . . . 1” NPT(F)
Weight . . . . . . . . . . . . . . . . . . . . . 67 lbs. (30.4 kgs.)
Pump Performance
Pump Specifications
Accessories
Ordering
650691-X43-B
43688.qxd 2/8/06 9:33 AM Page 60
58 | 8”, 28:1, Chop Check • Piston Pumps
Order Model Packings Upper Packings Lower DescriptionComplete Pump Models650888-C4D UHMW-PE (V-type) UHMW-PE (V-type) 8” Motor/28:1 Ratio650888-J3D PolyPak® (Polymyte®) UHMW-PE (V-type) 8” Motor/28:1 RatioLower Ends Only67300-C4D UHMW-PE (V-type) UHMW-PE (V-type) Lower Pump Assembly67300-J3D PolyPak® (Polymyte®) UHMW-PE (V-type) Lower Pump AssemblyPump Repair Kits637348-C4D UHMW-PE (V-type) UHMW-PE (V-type) Lower Pump Rep. Kit637348-J3D PolyPak® (Polymyte®) UHMW-PE (V-type) Lower Pump Rep. Kit
Polymyte® and PolyPak® are registered trademarks of Parker Company
Air Inlet Pressure Range. . . . . . 30 - 120 PSI (2 - 8.3 bar)
Fluid Pressure Range . . . . . . . . 840 - 3360 PSI (57.1 - 228.5 bar)
Max. Rec’d Cycles Per Minute . 70
Displacement Per Cycle . . . . . . 20
Volume/Cycle . . . . . . . . . . . . . . . 11.08 oz. (661.8 ml)
Flow @ 70 Cycles / Minute . . . . 6.06 GPM (22.94 lpm)
Noise Level @ 60 Psi. . . . . . . . . 89.8 db(A)
Reference Mounting Footprint “B”for related rams/accessories
Air F/R/L: 28353Airline Oil: 62274Air Motor Muffler: 92460Wet Sol: 66333-BFloor Mount: 65139Rams: Pages 13-15
Pump Performance
Accessories
Ordering
650888-XXX
• Proven ARO® Air Motor Reliabilty • Poly-Pak® Seals for Improved Endurance• Abrasion-Resistant Hard Chrome Plated Plunger• Tie-Rod Design for Fast Access• UHMW-PE Packings for Maximum Compatibility• Delivers 20 Cubic Inches per Cycle
43688.qxd 2/8/06 9:33 AM Page 61
12”, 30:1, Chop Check • Piston Pumps | 59
Air Inlet Pressure Range. . . . . . 30 - 90 PSI (2 - 6.1 bar).
Fluid Pressure Range . . . . . . . . 2700 PSI (183.6 bar) Max.
Max. Rec’d Cycles Per Minute . 60
Displacement Per Cycle . . . . . . 40.4 in3 (662 cm3)
Cycles Per Gallon (Liter) . . . . . . 5.7 (1.5)
Flow @ 60 Cycles / Minute . . . . 10.5 GPM (39.6 lpm)
Noise Level @ 60 Psi. . . . . . . . . 88 db(A) w/muffler
Lower Pump Material . . . . . . . . Carbon Steel
Plunger Material. . . . . . . . . . . . . Carbon Steel
Cylinder Material . . . . . . . . . . . . Carbon Steel (Hard Chrome)
Air Motor. . . . . . . . . . . . . . . . . . . 66506-B
Motor Repair Kit . . . . . . . . . . . 637112
Motor Diameter . . . . . . . . . . . . 12”
Stroke . . . . . . . . . . . . . . . . . . . . 6”
Air Inlet . . . . . . . . . . . . . . . . . . . 3/4” NPT(F)
Exhaust Port . . . . . . . . . . . . . . 1-1/4” NPT(F)
Lower Pump Model . . . . . . . . . . 66236-XXE-B
Lower Pump Repair Kit. . . . . . 637128-XX4-B
Material Inlet. . . . . . . . . . . . . . . . Bolted Flange
Material Outlet . . . . . . . . . . . . . . 1-1/2” NPT(F)
Weight . . . . . . . . . . . . . . . . . . . . . 147 lbs. (66.8 kgs.)
Reference Mounting Footprint “B”for related rams/accessories
Air F/R/L: 28353Airline Oil: 62274Air Motor Muffler: 66718Wet Sol: 66333-BFloor Mount: 65139Rams Pages 13-15
51.2(1301.7 mm)
31.4(797,7 mm)
20(508 mm)
6 5 0 9 7 1 - X X E - CPackings / Springs34 : Glass-Filled Teflon (Upper & Lower), Multiple Wave SpringC4 : UHMW-PE (Upper & Lower), Multiple Wave SpringF4 : UHMW-PE/Leather Staggered (Upper), UHMW-PE (Lower), Multiple Wave SpringJ3 : Polyurethane (Upper), UHMW-PE (Lower), No SpringP4 : UHMW-PE/Teflon Staggered (Upper), UHMW-PE (Lower), Multiple Wave SpringR4 : Teflon/UHMW-PE Staggered (Upper), Teflon (Lower) Multiple Wave Spring
Pump Performance
Pump Specifications
AccessoriesOrdering
650971-XXE-C
43688.qxd 2/8/06 9:33 AM Page 62
60 | 4-1/4”, 43:1, Chop Check • Piston Pumps
Air Inlet Pressure Range. . . . . . 30 - 120 PSI (2 - 8.3 bar)Fluid Pressure Range . . . . . . . . 1290 - 6450 PSI (87.7 - 438.7 bar)Max. Rec’d Cycles Per Minute . 60Displacement Per Cycle . . . . . . 2.8 in3 (45.8 cm3)Cycles Per Gallon (Liter) . . . . . . 82.5 (21.7)Flow @ 75 Cycles / Minute .9 GPM (3.4 lpm)Noise Level @ 60 Psi. . . . . . . . . 80 db(A)
Lower Pump Material . . . . . . . . Carbon SteelPlunger Material. . . . . . . . . . . . . 17-4 Stainless Steel Cylinder Material . . . . . . . . . . . . Carbon Steel Air Motor. . . . . . . . . . . . . . . . . . . 65440
Motor Repair Kit . . . . . . . . . . . 61268Motor Diameter . . . . . . . . . . . . 4-1/4”Stroke . . . . . . . . . . . . . . . . . . . . 4”Air Inlet . . . . . . . . . . . . . . . . . . . 1/2” NPT(F)Exhaust Port . . . . . . . . . . . . . . 1-1/4” NPT(F)
Lower Pump Models:Model 67120-P43 . . . . . . . . . . . 67100-P43Model 67120-P48 . . . . . . . . . . . 67100-P48
Lower Pump Repair Kits:Model 67120-P43 . . . . . . . . . . . 637290-P43Model 67120-P48 . . . . . . . . . . . 637290-P48
Material Inlet. . . . . . . . . . . . . . . . Follower Plate MountedMaterial Outlet . . . . . . . . . . . . . . 1/2” NPT(F)Weight . . . . . . . . . . . . . . . . . . . . . 44 lbs. (20 kgs.)
Reference Mounting Footprint “C”for related rams/accessories
Air F/R/L: C28241-810Airline Oil: 62274Air Motor Muffler: 91790Wet Sol: 66333-BFollower Plate: Page 16
6 7 1 2 0 - P 4 X
39.6(1005.8 mm)
16.9(429 mm)
PackingP : UHMW-PE/Teflon
Staggered (Upper),UHMW-PE (Lower)
24.2(619.7 mm)
Plungers3 : HD SS w/chrome
plating and standardlower packing
8 : HD SS w/chromeplating and cuptype lower packing
Pump Performance
Pump Specifications
Accessories
Ordering
67120-P4X
43688.qxd 2/8/06 9:33 AM Page 63
4-1/4”, 43:1, Chop Check • Piston Pumps | 61
Air Inlet Pressure Range. . . . . . 30 - 120 PSI (2 - 8.3 bar)
Fluid Pressure Range . . . . . . . . 1290 - 6450 PSI (87.7 - 438.7 bar)
Max. Rec’d Cycles Per Minute . 60
Displacement Per Cycle . . . . . . 2.8 in3 (45.8 cm3)
Cycles Per Gallon (Liter) . . . . . . 82.5 (21.7)
Flow @ 75 Cycles / Minute . . . . 0.9 GPM (3.4 lpm)
Noise Level @ 60 Psi. . . . . . . . . 80 db(A)
Lower Pump Material . . . . . . . . 300 Stainless SteelPlunger Material. . . . . . . . . . . . . 17-4 Stainless Steel (Hard Chrome)
Cylinder Material . . . . . . . . . . . . 15-5 Stainless Steel (Hard Chrome)
Air Motor. . . . . . . . . . . . . . . . . . . 65440Motor Repair Kit . . . . . . . . . . . 61268Motor Diameter . . . . . . . . . . . . 4-1/4”Stroke . . . . . . . . . . . . . . . . . . . . 4”Air Inlet . . . . . . . . . . . . . . . . . . . 1/2” NPT(F)Exhaust Port . . . . . . . . . . . . . . 1-1/4” NPT(F)
Lower Pump Model:Model 67121-P43 . . . . . . . . . . . 67101-P43Model 67121-P48 . . . . . . . . . . . 67101-P48
Lower Pump Repair Kits:Model 67121-P43 . . . . . . . . . . . 637291-P43Model 67121-P48 . . . . . . . . . . . 637291-P48
Material Inlet. . . . . . . . . . . . . . . . Follower Plated MountedMaterial Outlet . . . . . . . . . . . . . . 1/2” NPT(F)Weight . . . . . . . . . . . . . . . . . . . . . 44 lbs. (20 kgs.)
Reference Mounting Footprint “C”for related rams/accessories
Air F/R/L: C28241-810Airline Oil: 62274Air Motor Muffler: 91790Wet Sol: 66333-BFollower Plate: Page 16
39.6(1005.8 mm)
24.2(619.7 mm)
16.9(429 mm)
6 7 1 2 1 - P 4 X
Pump Performance
Pump Specifications
Accessories
Ordering
67121-P4X
Packing3 : UHMW-PE/Teflon Staggered (Upper),
UHMW-PE Grooved Piston (Lower)8 : UHMW-PE/Teflon Staggered (Upper),
UHMW-PE Single Lip Cup (Lower)
43688.qxd 2/8/06 9:33 AM Page 64
62 | 10”, 44:1, Chop Check • Piston Pumps
Order Model Packings Upper Packings Lower DescriptionComplete Pump Models650889-C4D UHMW-PE (V-type) UHMW-PE (V-type) 10” Motor/44:1 Ratio650889-J3D PolyPak® (Polymyte®) UHMW-PE (V-type) 10” Motor/44:1 RatioLower Ends Only67300-C4D UHMW-PE (V-type) UHMW-PE (V-type) Lower Pump Assembly67300-J3D PolyPak® (Polymyte®) UHMW-PE (V-type) Lower Pump AssemblyPump Repair Kits637348-C4D UHMW-PE (V-type) UHMW-PE (V-type) Lower Pump Rep. Kit637348-J3D PolyPak® (Polymyte®) UHMW-PE (V-type) Lower Pump Rep. Kit
Polymyte® and PolyPak® are registered trademarks of Parker Company
Air Inlet Pressure Range. . . . . . 30 - 90 PSI (2.1 - 6.2 bar)
Fluid Pressure Range . . . . . . . . 1320 - 3960 PSI (89.7 - 269.4 bar)
Max. Rec’d Cycles Per Minute . 70
Displacement Per Cycle . . . . . . 20
Volume/Cycle . . . . . . . . . . . . . . . 11.08 oz. (661.8 ml)
Flow @ 70 Cycles / Minute . . . . 6.06 GPM (22.94 lpm)
Noise Level @ 60 Psi. . . . . . . . . 89.8 db(A)
Reference Mounting Footprint “B”for related rams/accessories
Air F/R/L: 28353Airline Oil: 62274Air Motor Muffler: 66718Wet Sol: 66333-BFloor Mount: 65139Rams: 651612-4
Pump Performance
Accessories
Ordering
650889-XXX
• Proven ARO® Air Motor Reliabilty • Poly-Pak® Seals for Improved Endurance• Abrasion-Resistant Hard Chrome Plated Plunger• Tie-Rod Design for Fast Access• UHMW-PE Packings for Maximum Compatibility• Delivers 20 Cubic Inches per Cycle
43688.qxd 2/8/06 9:33 AM Page 65
8”, 44:1, Chop Check • Piston Pumps | 63
Air Inlet Pressure Range. . . . . . 30 - 120 PSI (2 - 8.3 bar).
Fluid Pressure Range . . . . . . . . 5280 PSI (359.1 bar) Max.
Max. Rec’d Cycles Per Minute . 60
Displacement Per Cycle . . . . . . 14.5 in3 (237.6 cm3)
Cycles Per Gallon (Liter) . . . . . . 15.9 (4.2)
Flow @ 60 Cycles / Minute . . . . 3.8 GPM (14.3 lpm)
Noise Level @ 60 Psi. . . . . . . . . 88 db(A) w/muffler
Lower Pump Material . . . . . . . . Carbon Steel
Plunger Material. . . . . . . . . . . . . 17-4 Stainless Steel (Hard Chrome)
Cylinder Material . . . . . . . . . . . . Carbon Steel
Air Motor. . . . . . . . . . . . . . . . . . . 66523-B
Motor Repair Kit . . . . . . . . . . . 66614
Motor Diameter . . . . . . . . . . . . 8”
Stroke . . . . . . . . . . . . . . . . . . . . 6”
Air Inlet . . . . . . . . . . . . . . . . . . . 3/4” NPT(F)
Exhaust Port . . . . . . . . . . . . . . 1-14” NPT(F)
Lower Pump Model . . . . . . . . . . 66243-X4D-B
Lower Pump Repair Kit. . . . . . 637071-X43-B
Material Inlet. . . . . . . . . . . . . . . . Bolted Flange
Material Outlet . . . . . . . . . . . . . . 1” NPT(F)
Weight . . . . . . . . . . . . . . . . . . . . . 89 lbs. (40.4 kgs.)
Reference Mounting Footprint “A”for related rams/accessories
Air F/R/L: 28353Airline Oil: 62274Air Motor Muffler: 92460Wet Sol: 66333-BFloor Mount: 65138Rams: Page 13
6 5 0 8 9 1 - X 4 D - C
52.3(1328.4 mm)
17.7(449.5 mm)
Packings3 : Glass-Filled Teflon (Upper & Lower)C : UHMW-PE (Upper & Lower)G : UHMW-PE/Leather Staggered (Upper & Lower)P : UHMW-PE/Teflon Staggered (Upper), UHMW-PE (Lower)R : Teflon/UHMW-PE Staggered (Upper), Teflon (Lower)
27.5(698.5 mm)
Pump Performance
Pump Specifications
Accessories
Ordering
650891-X4D-C
43688.qxd 2/8/06 9:33 AM Page 66
64 | 6”, 46:1, Chop Check • Piston Pumps
Air Inlet Pressure Range. . . . . . 30 - 120 PSI (2 - 8.3 bar)
Fluid Pressure Range . . . . . . . . 1380 - 6900 PSI (93.8 - 469.3 bar)
Max. Rec’d Cycles Per Minute . 60
Displacement Per Cycle . . . . . . 6.9 in3 (113 cm3)
Cycles Per Gallon (Liter) . . . . . . 33.4 (8.8)
Flow @ 60 Cycles / Minute . . . . 1.8 GPM (6.4 lpm)
Noise Level @ 60 Psi. . . . . . . . . 83 db(A) w/muffler
Lower Pump Material . . . . . . . . Carbon Steel
Plunger Material. . . . . . . . . . . . . 17-4 Stainless Steel (Hard Chrome)
Cylinder Material . . . . . . . . . . . . Carbon Steel
Air Motor. . . . . . . . . . . . . . . . . . . 65665-B
Motor Repair Kit . . . . . . . . . . . 61355
Motor Diameter . . . . . . . . . . . . 6”
Stroke . . . . . . . . . . . . . . . . . . . . 6”
Air Inlet . . . . . . . . . . . . . . . . . . . 1/2” NPT(F)
Exhaust Port . . . . . . . . . . . . . . 1-1/4” NPT(F)
Lower Pump Model . . . . . . . . . . 66266-X43-B
Lower Pump Repair Kit. . . . . . 637074-X43-B
Material Inlet. . . . . . . . . . . . . . . . Bolted Flange
Material Outlet . . . . . . . . . . . . . . 1” NPT(F)
Weight . . . . . . . . . . . . . . . . . . . . . 67 lbs. (30.4 kgs.)
Reference Mounting Footprint “A”for related rams/accessories
Air F/R/L: C28241-810Airline Oil: 62274Air Motor Muffler: 91790Wet Sol: 66333-BFloor Mount: 65138Rams: Page 13
6 5 0 6 9 2 - X 4 3 - B
51.6(1310.6 mm)
30.7(779.8 mm)
17.7(449.6 mm)
Packings3 : Glass-Filled Teflon (Upper & Lower)C : UHMW-PE (Upper & Lower)G : UHMW-PE/Leather StaggeredP : UHMW-PE/Teflon Staggered (Upper), UHMW-PE (Lower)R : Teflon/UHMW-PE Staggered (Upper), Teflon (Lower)
Pump Performance
Pump Specifications
AccessoriesOrdering
650692-X43-B
43688.qxd 2/8/06 9:33 AM Page 67
12”, 65:1, Chop Check • Piston Pumps | 65
650989-XXX
Order Model Packings Upper Packings Lower DescriptionComplete Pump Models650989-C4D UHMW-PE (V-type) UHMW-PE (V-type) 12” Motor/65:1 Ratio650989-J3D PolyPak® (Polymyte®) UHMW-PE (V-type) 12” Motor/65:1 RatioLower Ends Only67300-C4D UHMW-PE (V-type) UHMW-PE (V-type) Lower Pump Assembly67300-J3D PolyPak® (Polymyte®) UHMW-PE (V-type) Lower Pump AssemblyPump Repair Kits637348-C4D UHMW-PE (V-type) UHMW-PE (V-type) Lower Pump Rep. Kit637348-J3D PolyPak® (Polymyte®) UHMW-PE (V-type) Lower Pump Rep. Kit
Polymyte® and PolyPak® are registered trademarks of Parker Company
Air Inlet Pressure Range. . . . . . 30 - 90 PSI (2.1 - 6.2 bar)
Fluid Pressure Range . . . . . . . . 1950 - 5850 PSI (134.5 - 403.4 bar)
Max. Rec’d Cycles Per Minute . 70
Displacement Per Cycle . . . . . . 20
Volume/Cycle . . . . . . . . . . . . . . . 11.08 oz. (327.6 ml)
Flow @ 70 Cycles / Minute . . . . 6.06 GPM (22.94 lpm)
Noise Level @ 60 Psi. . . . . . . . . 89.8 db(A)
Reference Mounting Footprint “B”for related rams/accessories
Air F/R/L: 28353Airline Oil: 62274Air Motor Muffler: 66718Wet Sol: 66333-BFloor Mount: 65139Rams: Pages 13-15
Pump Performance
Accessories
Ordering
• Proven ARO® Air Motor Reliabilty • Poly-Pak® Seals for Improved Endurance• Abrasion-Resistant Hard Chrome Plated Plunger• Tie-Rod Design for Fast Access• UHMW-PE Packings for Maximum Compatibility• Delivers 20 Cubic Inches per Cycle
* The pump sound pressure level has beenupdated to an Equivalent Continuous SoundLevel (Laeq) to meet the intent of ANSI S1. 13-1971, CAGI PNEUROP S5.1 using fourmicrophone locations.
43688.qxd 2/8/06 9:33 AM Page 68
66 | 4.125 2”, 0.8:1, 2-Ball • Hydraulic Piston Pumps
Accessories
Hydraulic Inlet Pressure Range . 50 - 2000 PSI (3.4 - 137.9 bar)Fluid Pressure Range . . . . . . . . 40 - 1600 PSI (2.8 - 110.3 bar)Hydraulic flow req’d @ 50 cpm. . 8.7 GPM (32.9 lpm)Max. Rec’d Cycles Per Minute . 50Displacement Per Cycle . . . . . . 59.6 in3
Volume / Cycle . . . . . . . . . . . . . . 33.0 oz. (976.3 ml)Cycles Per Gallon (Liter) . . . . . . 3.9Flow @ 50 Cycles / Minute . . . . 12.9 GPM (48.8 lpm)Maximum Temperature Limit . . 130° F (54° C)
Lower Pump Material . . . . . . . . 400 Stainless Steel
Plunger Material. . . . . . . . . . . . . 15-5 Stainless Steel (Hard Chrome)
Cylinder Material . . . . . . . . . . . . 15-5 Stainless Steel (Hard Chrome)
Hydraulic Motor . . . . . . . . . . . . . 61626-100
Motor Repair Kit . . . . . . . . . . . 637148-1
Motor Size . . . . . . . . . . . . . . . . 4.125 in.2 (26.6 cm2)
Stroke . . . . . . . . . . . . . . . . . . . . 6”
Hydraulic Inlet . . . . . . . . . . . . . 1/2” NPT(F)
Hydraulic Return . . . . . . . . . . . 3/4” NPT(F)
Lower Pump Model . . . . . . . . . . 66941-X6D
Lower Pump Repair Kit. . . . . . 637211-XX3
Material Inlet . . . . . . . . . . . . . . . 2” - 11-1/2 N.P.T.F. - 1 (m)
Material Outlet . . . . . . . . . . . . . . 1-1/4” - 11-1/2 N.P.T.F. - 1 (f)
Weight . . . . . . . . . . . . . . . . . . . . . 140 lbs (63.5 Kgs.)
Pump Performance
Pump Specifications
Ordering
Reference Mounting Footprint “A”for related rams/accessories
Floor Mount: 65138Wet Sol: 66999-BWall Mount Bracket: 61938-1Floor Mount Adapter: 67136
Packings / SpringsC : UHMW-PEK : Carbon-Graphite Filled TelfonL : Mineral Filled Teflon
P4 : UHMW-PE/Teflon Staggered (Upper),UHMW-PE (Lower)
R4 : Teflon/UHMW-PE (Upper)Teflon (Lower)
6 5 0 9 4 0 - X 6 D - B
650940-X6D-B
47.8(1214 mm)
32.5(826 mm)
43688.qxd 2/8/06 9:33 AM Page 69
4.125 in2, 1.2:1, Chop Check • Hydraulic Piston Pumps | 67
Hydraulic Inlet Pressure Range . 50 - 2000 PSI (3.4 - 136 bar)Fluid Pressure Range . . . . . . . . 60 - 2668 PSI (4 - 181.5 bar)Hydraulic flow req’d @ 50 cpm. . 8.7 GPM (32.9 lpm)Max. Rec’d Cycles Per Minute . 50Displacement Per Cycle . . . . . . 6.9 in3
Volume / Cycle . . . . . . . . . . . . . . 3.9 oz. (114 ml)Cycles Per Gallon (Liter) . . . . . . 33.2Flow @ 50 Cycles / Minute . . . . 1.5 GPM (5.7 lpm)Maximum Temperature Limit . . 130° F (54° C)
Lower Pump Material . . . . . . . . Carbon Steel Plunger Material. . . . . . . . . . . . . Carbon Steel (Hard Chrome)Cylinder Material . . . . . . . . . . . . Carbon Steel Hydraulic Motor . . . . . . . . . . . . . 61626-100
Motor Repair Kit . . . . . . . . . . . 637148-1Motor Size . . . . . . . . . . . . . . . . 4.125 in.2 (26.6 cm2)Stroke . . . . . . . . . . . . . . . . . . . . 6”Hydraulic Inlet . . . . . . . . . . . . . 1/2” NPT(F)Hydraulic Return . . . . . . . . . . . 3/4” NPT(F)
Lower Pump Model . . . . . . . . . . 66236-XXE-BLower Pump Repair Kit. . . . . . 637128-XX4-B
Material Inlet . . . . . . . . . . . . . . . Bolted FlangeMaterial Outlet . . . . . . . . . . . . . . 1-1/2” NPT(F)Weight . . . . . . . . . . . . . . . . . . . . . 144 lbs (65.5 Kgs.)
6 5 0 9 4 1 - X X E - C Reference Mounting Footprint “B”for related rams/accessories
Floor Mount: 65139Wet Sol: 66333-BRams: Pages 13-14
20(508 mm)
36.47(926 mm)
52.9(1344 mm)
Pump Performance
Pump Specifications
AccessoriesOrdering
650941-XXE-C
Packings / SpringsF4 : UHMW-PE/Leather Staggered (Upper),
UHMW-PE (Lower) J3 : Polyurethane (Upper)
UHMW-PE (Lower),P4 : UHMW-PE/Teflon Staggered (Upper),
UHMW-PE (Lower)R4 : Teflon/UHMW-PE (Upper)
Teflon (Lower)
43688.qxd 2/8/06 9:33 AM Page 70
68 | 2.062 2”, 2:1, Chop Check • Hydraulic Piston Pumps
Accessories
Hydraulic Inlet Pressure Range . 50 - 1200 PSI (3.4 - 83 bar)Fluid Pressure Range . . . . . . . . 100 - 2400 PSI (6.9 - 165.5 bar)Hydraulic flow req’d @ 50 cpm. . 8.7 GPM (32.9 lpm)Max. Rec’d Cycles Per Minute . 50Displacement Per Cycle . . . . . . 12.5 in3
Volume / Cycle . . . . . . . . . . . . . . 6.9 oz. (205 ml)Cycles Per Gallon (Liter) . . . . . . 18.5Flow @ 50 Cycles / Minute . . . . 2.7 GPM (10.2 lpm)Maximum Temperature Limit . . 130° F (54° C)
Lower Pump Material . . . . . . . . Carbon Steel (Hard Chrome)
Plunger Material. . . . . . . . . . . . . 17-4 Stainless Steel
Cylinder Material . . . . . . . . . . . . Carbon Steel
Hydraulic Motor . . . . . . . . . . . . . 67147
Motor Repair Kit . . . . . . . . . . . 637315
Motor Size . . . . . . . . . . . . . . . . 2.062 in.2 (13.3 cm2)
Stroke . . . . . . . . . . . . . . . . . . . . 6”
Hydraulic Inlet . . . . . . . . . . . . . 3/8” NPT(F)
Hydraulic Return . . . . . . . . . . . 1/2” NPT(F)
Lower Pump Model . . . . . . . . . . 66243-XX3-B
Lower Pump Repair Kit. . . . . . 637071-XX3-B
Material Inlet . . . . . . . . . . . . . . . N/A
Material Outlet . . . . . . . . . . . . . . 1” - 11-1/2 N.P.T.F. - 1 (f)
Weight . . . . . . . . . . . . . . . . . . . . . 68 lbs (30.9 Kgs.)
Pump Performance
Pump Specifications
Ordering
Reference Mounting Footprint “A”for related rams/accessories
Floor Mount: 65138Wet Sol: 66999-BWall Mount Bracket 61938-1Rams: Pages 13-14Floor/Follower Adapter: 67136
Springs4 : Multiple Wave Spring9 : Multiple Wave Spring
w/Alternate Solvent Cup
6 5 0 9 3 4 - X X 3 - C
650934-XX3-C
Packings3 : Glass Filled TelfonC : UHMW-PEG : UHMW-PE/Leather StaggeredP : UHMW-PE/Teflon Staggered (Upper),
UHMW-PE (Lower)R : Teflon/UHMW-PE Staggered(Upper)
Teflon (Lower)
47.5(1206 mm)
33.1(841 mm)
17.75(450 mm)
43688.qxd 2/8/06 9:33 AM Page 71
4.125 2”, 2.4:1, 2-Ball • Hydraulic Piston Pumps | 69
Accessories
Hydraulic Inlet Pressure Range . 50 - 1200 PSI (3.4 - 137.9 bar)Fluid Pressure Range . . . . . . . . 120 - 4800 PSI (8.3 - 331.0 bar)Max. Rec’d Cycles Per Minute . 50Displacement Per Cycle . . . . . . 20.3 in3
Volume / Cycle . . . . . . . . . . . . . . 11.3 oz. (333.0 ml)Cycles Per Gallon (Liter) . . . . . . 11.4Flow @ 50 Cycles / Minute . . . . 4.4 GPM (16.7 lpm)Maximum Temperature Limit . . 130° F (54° C)
Lower Pump Material . . . . . . . . Carbon Steel
Plunger Material. . . . . . . . . . . . . 17-4 Stainless Steel (Hard Chrome)
Cylinder Material . . . . . . . . . . . . 15-5 Stainless Steel
Air Motor. . . . . . . . . . . . . . . . . . . 61626-100
Motor Repair Kit . . . . . . . . . . . 637148-1
Motor Size . . . . . . . . . . . . . . . . 4.125 in.2 (26.6 cm2)
Stroke . . . . . . . . . . . . . . . . . . . . 6” (15.2 cm)
Hydraulic Inlet . . . . . . . . . . . . . 1/2” - 14 NPT - 1 (f)
Hydraulic Return . . . . . . . . . . . 3/4” - 14 NPS (f)
Lower Pump Model . . . . . . . . . . 66475-X4D
Lower Pump Repair Kit. . . . . . 637098-X43
Material Inlet . . . . . . . . . . . . . . . 2” - 11-1/2 N.P.T.F. - 1 (f)
Material Outlet . . . . . . . . . . . . . . 1” - 11-1/2 N.P.T.F. - 1 (f)
Weight . . . . . . . . . . . . . . . . . . . . . 140 lbs (63.5 Kgs.)
Pump Performance
Pump Specifications
Ordering
Reference Mounting Footprint “B”for related rams/accessories
Floor Mount: 65139Wet Sol: 66999-BWall Mount Bracket 61938-1Rams: Pages 13-14
Packings3 : Glass Filled TelfonC : UHMW-PEG : UHMW-PE/Leather StaggeredP : UHMW-PE/Teflon Staggered (Upper),
UHMW-PE (Lower)R : Teflon/UHMW-PE Staggered(Upper)
Teflon (Lower)
6 5 0 9 3 9 - X 4 D - B
650939-X4D-B
48.6(1238 mm)
32.1(815 mm)
43688.qxd 2/8/06 9:33 AM Page 72
70 | 2.0622”, 3.3:1, 2-Ball • Hydraulic Piston Pumps
Accessories
Hydraulic Inlet Pressure Range . 50 - 1200 PSI (3.4 - 83 bar)Fluid Pressure Range . . . . . . . . 165 - 3994 PSI (11.4 - 275 bar)Hydraulic Flow Req’d @ 50 cpm . . 8.7 gpm (32.9 lpm)Max. Rec’d Cycles Per Minute . 50Displacement Per Cycle . . . . . . 7.4 in3
Volume / Cycle . . . . . . . . . . . . . . 4.1 oz. (121.8 ml)Cycles Per Gallon (Liter) . . . . . . 31.1Flow @ 50 Cycles / Minute . . . . 1.6 GPM (6.1 lpm)Maximum Temperature Limit . . 130° F (54° C)
Lower Pump Material . . . . . . . . 316 Stainless SteelPlunger Material. . . . . . . . . . . . . 17-4 Stainless SteelCylinder Material . . . . . . . . . . . . 316 Stainless SteelAir Motor. . . . . . . . . . . . . . . . . . . 67147
Motor Repair Kit . . . . . . . . . . . 637315Motor Size . . . . . . . . . . . . . . . . 2.062 in.2 (13.3 cm2)Stroke . . . . . . . . . . . . . . . . . . . . 6” (15.2 cm)Hydraulic Inlet . . . . . . . . . . . . . 3/8” - 18 NPT - 1 (f)Hydraulic Return . . . . . . . . . . . 1/2” - 14 NPS (f)
Lower Pump Model . . . . . . . . . . 66301-XXXLower Pump Repair Kit. . . . . . 637306-X43
Material Inlet . . . . . . . . . . . . . . . 1” - 11-1/2 NPTF - 1 (f) &2” 11-1/2 PTF (m) (short)
Material Outlet . . . . . . . . . . . . . . 1” - 11-1/2 NPTF - 1 (f)Weight . . . . . . . . . . . . . . . . . . . . . 41.3 lbs (18.7 Kgs.)
Pump Performance
Pump Specifications
Ordering
Reference Mounting Footprint “A” or “D”for related rams/accessories
Floor Mount: 65138Wet Sol: 66999-BWall Mount Bracket 61938-1Floor/Follower Adapter: 67136
Packings3 : Glass Filled TelfonC : UHMW-PEG : UHMW-PE/Leather Staggered
6 5 0 9 4 4 - X X X - B
650944-XX3-C
Springs4 : Multiple Wave Spring7 : Multiple Wave Spring w/440 Stainless
Steel BallsP : UHMW-PE/Teflon Staggered (Upper),
UHMW-PE (Lower)R : Teflon/UHMW-PE Staggered(Upper)
Teflon (Lower)
Plunger Type3 : Hardened Stainless
Steel w/ Hard Chrome Plating
B : Hardened StainlessSteel w/ CeramicCoating
43.1(1095 mm)
12..7(322 mm)
27.9(708 mm)
43688.qxd 2/8/06 9:33 AM Page 73
2.062 2”, 3.6:1, Chop Check • Hydraulic Piston Pumps | 71
Hydraulic Inlet Pressure Range . 65 - 1200 PSI (4.5 - 81.6 bar)Fluid Pressure Range . . . . . . . . 180 - 4320 PSI (12.2 - 293.8 bar)Hydraulic flow req’d @ 50 cpm. . 8.7 GPM (32.9 lpm)Max. Rec’d Cycles Per Minute . 50Displacement Per Cycle . . . . . . 6.9 in3 (113 cm3)Volume / Cycle . . . . . . . . . . . . . . 3.8 oz. (112 ml)Cycles Per Gallon (Liter) . . . . . . 33 (8.8)Flow @ 50 Cycles / Minute . . . . 1.5 GPM (5.7 lpm)Maximum Temperature Limit . . 130° F (54° C)
Lower Pump Material . . . . . . . . Carbon SteelPlunger Material. . . . . . . . . . . . . 17 - 4 Stainless Steel, (Hard Chrome)Cylinder Material . . . . . . . . . . . . Carbon Steel Hydraulic Motor . . . . . . . . . . . . . 67147
Motor Repair Kit . . . . . . . . . . . 637315Motor Size . . . . . . . . . . . . . . . . 2.062 in2 (13.3 cm2)Stroke . . . . . . . . . . . . . . . . . . . . 5.75” (14.6 cm)Hydraulic Inlet . . . . . . . . . . . . . 3/8” NPT(F)Hydraulic Return . . . . . . . . . . . 1/2” NPT(F)
Lower Pump Model . . . . . . . . . . 66266-X43-BLower Pump Repair Kit. . . . . . 637074-X43-B
Material Inlet . . . . . . . . . . . . . . . Bolted FlangeMaterial Outlet . . . . . . . . . . . . . . 1” NPT(F)Weight . . . . . . . . . . . . . . . . . . . . . 68 lbs (30.9 Kgs.)
Reference Mounting Footprint “A”for related rams/accessories
Floor Mount: 65138Wet Sol: 66333-BRams: Pages 13-14
6 5 0 9 3 5 - X 4 3 - C
17.75(450 mm)
33.09(841 mm)
47.47(1206 mm)
Packings3 : TeflonC : UHMW-PEG : UHMW-PE/Leather StaggeredP : UHMW-PE/Teflon Staggered (Upper),
UHMW-PE (Lower)R : Teflon/UHMW-PE Staggered (Upper),
Teflon (Lower)
Pump Performance
Pump Specifications
AccessoriesOrdering
650935-X43-C
43688.qxd 2/8/06 9:33 AM Page 74
General Piston Style Pump
Air Systems Components
Noise Emissions
72 | Warranty and Emissions • Piston Pumps
IR/ARO warrants to the original use purchaser of the AROmanufactured products depicted in this catalog that ARO will repairor replace free of charges, including return shipping costs within theContinental United State of America, any such product which undernormal use and service proves defective in material orworkmanship, as determined by Aro Inspection, within five (5) yearsfrom date of purchase provided the claimed defective product, orthereof is promptly returned to the ARO factory or ARO CustomerService Center with transportation charges prepaid.
If ARO inspection discloses no defect in material or workmanship,repair or replacement and return will be made at customarycharges.
The foregoing warranty supersedes, voids and is in lieu of all or anyother warranties, express or implied, and no warranty ofmerchantability or fitness for particular purpose is intended ormade. ARO’s sole obligation and the original use purchaser’s soleremedy is as stated above and in no event shall ARO be liable forany special, direct, indirect, incidental, consequential or otherdamages or expenses of any nature including, without limitation,loss of profits or production time incurred by the original usepurchaser or any other party.
IR/ARO warrants to the original use purchaser of the Air SystemsComponents depicted in this catalog that ARO will repair or replace,free of charges, including return shipping costs within theContinental United State of America, any such product which undernormal use and service proves defective in material orworkmanship, as determined by Aro Inspection, within twelve (12)months from date of purchase provided the claimed defectiveproduct, or thereof is promptly returned to the ARO CustomerService Repair Center or a factory-authorized service repair center,with transportation charges prepaid. Full warranty informationavailable upon request.
PUMP AIRMOTOR OPERATING SOUND
SIZE/STROKE PRESSURE CYCLES/ PRESSURE(INCHES) MUFFLER (PSI) MIN (LAeq)
( 2/4 NONE 60 40 74.8( 2/6 NONE 60 40 77.8( 2/6 NONE 60 40 82.8
2/2-5/8 NONE 60 40 81.83/2-5/8 NONE 60 40 83.83-1/4/6 91790 60 40 74.84-1/4/6 91790 60 40 81.8
6/6 91790 60 40 84.88/6 92460 60 40 89.810/6 66718 60 40 84.812/6 66718 60 40 89.8
Piston Pumps
The pump sound pressure levels published below havebeen updated to an Equivalent Continuous Sound Level(LAeq) to meet the intent of ANSI S1.13-1971. CAGI-PNEUROP S5.1 using four microphone locations.
43688.qxd 2/8/06 9:33 AM Page 75
43688.qxd 2/8/06 9:33 AM Page 76
FORM 9909-P 0206 © 2006 Ingersoll Rand CompanyCPN 99921116
Ingersoll Rand Industrial Technologies provides products, services, and solutions to enhance the efficiency and productivity of our commercial, industrial, and process customers. Our innovative productsinclude air compressors, air systems components, tools, pumps, material and fluid handling systems and microturbines.
www.irtools.com/aro
43688.qxd 2/8/06 9:32 AM Page 1