Performing Voice Commands: SITREP, 9 Line MEDEVAC and
Visual Signal Techniques
Familiarize the Commander’s SITREP and 9 line medevac casualty evacuation request formats
Perform Visual Signal Techniques
Tasks
In a classroom setting familiarize yourself with the Commander’s SITREP, 9 Line Medevac, and Visual Signal Techniques
Conditions
Be familiar with a 9 line medevac request and a commander’s SITREP and Visual Signal Techniques
With the given handouts follow along
Standards
Commanders SITREP
References: FM 100-15; FM 71-3; FM 71-2
Used to keep the commander’s higher and lower staff updated and advised on the reporting commander’s critical situation
Are not for general discussion, news reports or unconfirmed rumors
In a field setting can be transmitted over a secure radio or FBCB2 tracker (Force Battle Command Brigade and Below)
SITREP (Situation Report)
LINE 1- DATE AND TIME_________________(DTG) LINE 2- UNIT________________(Unit making report) LINE 3- REFERENCE____________________(Provide
reference: report title, originator, and DTG) LINE 4- ORIGINATOR____________________(Unit
identification code of the unit originating the report)
LINE 5- REPORTED UNIT__________________(Unit identification code of the reported unit)
SITREP FORMAT
LINE 6- HOME LOCATION_________________(UTM or 6 digit grid coordinate with MGRS grid zone designator for the home location of the reported unit)
LINE 7- PRESENT LOCATION_______________(UTM or 6 digit coordinate with MGRS grid zone designator for the present location of the reported unit)
LINE 8- ACTIVITY_________________________(Brief description of reported unit’s current activity)
LINE 9- EFFECTIVE________________(Commander’s evaluation of the reported unit’s combat effectiveness)
SITREP FORMAT CONT.
LINE 10- OWN SITUATION DISPOSITION/STATUS__________________(A summary updating changes to or not previously reported major combatant and support force locations; significant mission readiness degradation on units; current deployments; proposed deployments; changes in task force designations; organization or operational control (CHOP); and projected requirements for additional forces)
SITREP FORMAT CONT.
LINE 11- LOCATION______________________(UTM or 6 digit grid coordinate with MGRS Grid Zone Designator
LINE 12- SITUATION OVERVIEW___________(A brief overall assessment of the situation to include circumstances or conditions which increase or materially detract from the capability and readiness of forces assigned or under operational control of the command or service)
SITREP FORMAT CONT.
LINE 13- OPERATIONS_____________________(A brief description and results of offensive and defensive operations carried out by major combatant elements during the period of the report; information on allied forces’ operations; summary of plans for combat operations during next 24 hours including objectives and probable enemy reaction; deviations or variations from previously reported intentions/plans
SITREP FORMAT CONT.
LINE 14- INTELLIGENCE/RECONNAISSANCE_________(Brief overview of the situation, including operations, order of battle, capabilities, and the threat changes; reference: any significant spot intelligence reports (SPIREPs) or intelligence reports (INTREPs) submitted in previous 24 hours)
LINE 15-LOGISTICS___________________(Significant deficiencies affecting support for planned operations; problem areas beyond the commander’s or services’ capability to overcome or alleviate in a timely manner)
SITREP FORMAT CONT.
LINE 16- COMMUNICATIONS/CONNECTIVITY____________ (Significant outages, traffic volume, incompatibilities, and quantitative equipment deficiencies; an assessment of the mission impact caused by communications outages and degradations should be provided by the CINC’s J-6/J-3 staff and contained in this section
SITREP FORMAT CONT.
LINE 17- PERSONNEL____________________(Factors affecting readiness of forces/units; mobilization status; daily battle casualties for example: KIA (killed in action); WIA (wounded in action); MIA (missing in action) aggregated by service and impact of all casualties sustained(Battle, nonbattle, critical skills, key personnel upon the commands’ mission capability)
SITREP FORMAT CONT.
9 Line Medevac
References: FM 4-25.11; FM 21-11
Consists of 9 lines of information used to request a casualty evacuation
MEDEVAC request lines 1 to 5 must always be transmitted first, this enables the evacuation unit to begin the mission and avoid unnecessary delay if the information in lines 6 to 9 is not available yet
The information for Lines 6 through 9 should be transmitted as soon as it is available
Keep your radio traffic brief to avoid tying up the channel. Remember to break after every three lines at the
minimum in case the radio operators needs to double-check your information
9 Line Medevac
LINE 1- Location of pick-up site (Grid zone designator with 8 digit grid)
LINE 2- Radio Frequency, call sign, and suffix (Required so that evacuation vehicle can contact requesting unit while enroute or obtain additional information or changes in situation or directions)
9 Line Medevac Request Format
LINE 3- Number of patients by precedence:A. Urgent- patients who should be evacuated as soon as
possible and within two hours to save life, limb, or eyesightB. Urgent Surgical- patients who must have surgical
intervention to save their lifeC. Priority- patient who should be moved within four hours or
condition will deteriorate to such a degree that it will become urgent
D. Routine- personnel whose condition is not expected to worsen significantly and who will require evacuation in the next 24 hours
E. Convenience- category assigned to patients for whom evacuation is a matter of medical convenience rather than necessity
9 Line Medevac Request Format Cont.
LINE 4- Special Equipment required:A. NoneB. HoistC. Extraction equipmentD. Ventilator
LINE 5- Number of patients:A. LitterB. Ambulatory
9 Line Medevac Request Format Cont.
LINE 6- Security at pick-up site:N- no enemy troops in areaP- possible enemy troops in area (approach with
caution)E- enemy troops in area (approach with caution)X- enemy troops in area (armed escort required)*In peacetime- number and types of wounds,
injuries, and illnesses
9 Line Medevac Request Format Cont.
LINE 7- Method of marking pick-up site:A. PanelsB. Pyrotechnic signalC. Smoke signalD. NoneE. Other
9 Line Medevac Request Format Cont.
LINE 8- Patient nationality and status:A. US militaryB. US civilianC. Non-US militaryD. Non-US civilianE. EPW
LINE 9- NBC contamination:N- NuclearB- BiologicalC- Chemical* In peacetime- terrain description of pick-up site
9 Line Medevac Request Format Cont.
“Delta, this is Echo4, over” “Echo4, this is Delta, send over” “This is Echo4, request MEDEVAC, over” “Roger Echo4, send your request, over” “Line One – LZ Jaybird 86750055 -Break” “Line Two-HF 231.45, UHF-114.1 Echo4 -Break” “Line Three- 2A, 3C – Break” “Line Four-A – Break” “Line Five-2L, 3A – Break” “Line Six-P – Break” “Line Seven-C – Break” “Line Eight- A – Break” “Line Nine- All Clear – Break” “How Copy my last, Over” “Roger Echo4, solid copy, stand-by for inbound MEDEVAC plan – over” “Echo4 standing-by, over”
Example of a 9 Line Medevac Request
Two Volunteers Please One volunteer will read as the person requesting
the 9 line medevac (call sign Echo4) The other volunteer will read the person receiving
the 9 line medevac request (call sign Delta)
9 Line Medevac Exercise
Communicating Using Visual Signal Techniques
References: FM 7-7; FM 17-95; FM 21-60
Hand and are signals are given while mounted-vehicle to vehicle, and dismounted-from ground to vehicle or ground to ground. Dismounted signals given from ground to vehicle are normally referred to as “Ground Guide” signals, these are used to communicate to either one element or to an entire unit
Flag signals are used in the same manner as hand and arm signals
Pyrotechnic signals are used either mounted or dismounted to communicate to an entire unit
Ground to air signals are used to guide a helicopter(s) to a landing point
Visual Signaling Techniques
START ENGINES or PREPARE TO MOVE STOP ENGINE HALT or STOP MOVE FORWARD MOVE IN REVERSE (backup) CHANGE DIRECTION
Dismounted Visual Signal Commands: Day Ground Guide Signals
NEUTRAL STEER (tracked vehicles) INCREASE SPEED LIGHTS ON- point index finger of both hands
toward eyes LIGHTS OFF CLOSE DISTANCE BETWEEN VEHICLES AND
STOP RAISE RAMP LOWER RAMP
Dismounted Visual Signal Commands Day Ground Guide Signals Cont.
Are used during periods of darkness or limited visibility. Objects such as a flashlight with a filtered lens or a chemlight are normally used to give signals. Never use a bright light-it will give your position to the enemy
Night Ground Signals
START ENGINE HALT, STOP (moving vehicles) or STOP
ENGINE (stationary vehicles) INCREASE SPEED TURN MOVE IN REVERSE (for vehicles which are
not moving) or SLOW DOWN (for vehicles which are moving)
Dismounted Ground Guide Signals: Night Ground Guide Signal Commands
Are always used when a vehicle is moving in reverse or neutral steering
The rear ground guide is in command of moving the vehicle when it is moving in reverse and will give his or her visual signals according to the direction he or she wants the front of the vehicle to move
Rear Ground Guide Signals
The front ground guide is responsible for relaying the signals given by the rear ground guide to the driver of the vehicle
When the rear ground guide is giving a command the front ground guide will create a mirror image of the rear ground guide’s signals. For e.g. when the rear ground guide is giving the command “move in reverse-change direction left”
Front Ground Guide Signals
Used to control movement and give warning to either an entire unit or a platoon size or larger element within a unit
Track commanders execute the signals to communicate messages between vehicles
When an action or movement is to be executed by less than the total unit, the signaler will point, if necessary, toward the elements of a unit as an “alert” that a signal will follow. However, when a movement or action is to be executed by the entire unit the proper signal should be preceded by the signal “attention”
Mounted Visual Signals
Are performed by “hand and arm” signals or by the use of flags
Hand and arm signals to direct combat formations
Mounted Visual Signals Cont.
COIL HERRINGBONE CONTACT LEFT CONTACT RIGHT ACTION LEFT ACTION RIGHT AIR ATTACK NBC ATTACK
Mounted Visual Signals Commands
TRAVELING TRAVELING OVERWATCH BOUNDING OVERWATCH or COVER MY MOVE MOVE TO LEFT MOVE TO RIGHT
Mounted Visual Signals: Hand and Arm Signals to Initiate Movement Techniques Commands
ATTENTION I AM READY or READY TO MOVE or ARE YOU
READY? MOUNT DISMOUNT or TAKE A PRONE POSITION DISREGARD PREVIOUS COMMAND or AS
YOU WERE
Mounted Visual Signals: Hand and Arm Signals to Control Vehicle Commands
I DO NOT UNDERSTAND ADVANCE or MOVE OUT OPEN UP CLOSE UP RIGHT/LEFT TURN BUTTON UP UNBUTTON MESSAGE ACKNOWLEDGED
Mounted Visual Signals: Hand and Arm Signals to Control Vehicle Commands Cont.
Are used to communicate messages between vehicles over distances which are to use standard hand and arm signals. The use of flags must be strictly monitored to prevent the enemy from detecting your position
Flag Signal Techniques
MOUNT- with the DISMOUNT DISMOUNT AND ASSAULT ASSSEMBLE or CLOSE MOVE OUT NBC HAZARD PRESENT
Flag Signal Technique Commands
Three Volunteers Please Each Volunteer will perform 1 visual signal
technique off the handout
Visual Signal Techniques Exercise